2 # Copyright (C) 2016 Ian Kelling
4 # Licensed under the Apache License, Version 2.0 (the "License");
5 # you may not use this file except in compliance with the License.
6 # You may obtain a copy of the License at
8 # http://www.apache.org/licenses/LICENSE-2.0
10 # Unless required by applicable law or agreed to in writing, software
11 # distributed under the License is distributed on an "AS IS" BASIS,
12 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 # See the License for the specific language governing permissions and
14 # limitations under the License.
20 exec &> >(sudo
tee -a /var
/log
/distro-end
)
21 echo "$0: $(date): starting now)"
23 src
="${BASH_SOURCE%/*}"
27 IFS
= read -r -d '' y ||
:
31 spa
() { # simple package add
38 sed="sed --follow-symlinks"
62 # swh-plugins is for karaoke pulsaudio filter.
64 # guvcview set webcam brightness to highest
65 # pidgin-otr, i went into pidgin pluggin settings and generated a key for some accounts
107 gnome-session-flashback
145 $
(aptitude show ruby |
sed -rn 's/Depends: (.*)/\1/p')-doc
152 transmission-remote-gtk
157 spa $
(apt-cache search ruby
[.0-9]+-doc|
awk '{print $1}')
162 ########### begin section including li ################
173 # ubuntu 14.04 uses b-cron,
174 # but its not maintained in arch.
175 # of the ones in the main repos, cronie is only one maintained.
176 # fcron appears abandoned software.
180 *) : ;; # other distros come with cron.
196 debian|trisquel|ubuntu
) pi curl
;;
208 arch
) spa the_silver_searcher
;;
209 debian|ubuntu|trisquel
) spa silversearcher-ag
;;
214 debian|ubuntu|trisquel
) spa ntp
;;
223 # no equivalent in other distros:
225 debian|ubuntu|trisquel
)
227 if ! dpkg
-s apt-file
&>/dev
/null
; then
228 # this condition is just a speed optimization
232 # for debconf-get-selections
238 ubuntu|trisquel|debian
) spa ack-grep
;;
239 arch|fedora
) spa ack
;;
244 arch|debian|ubuntu|trisquel
)
257 # allows me to pipe with ssh -t, and gets rid of spam
258 # http://forums.debian.net/viewtopic.php?f=5&t=85822
259 # i'd rather disable the service than comment the init file
260 # this says disabling the service, it will still get restarted
261 # but this script doesn't do anything on restart, so it should be fine
262 s
dd of
=/var
/run
/motd.dynamic
if=/dev
/null
263 # stretch doesn't have initscripts pkg installed by default
264 if [[ $
(debian-codename
) == jessie
]]; then
265 s update-rc.d motd disable
269 # this isn't a complete solution. It still shows me when updates are available,
270 # but it's no big deal.
271 s t
/etc
/update-motd.d
/10-help-text /etc
/update-motd.d
/00-header
277 # https://debian-handbook.info/browse/stable/sect.regular-upgrades.html
278 # /etc/cron.daily/apt calls unattended-upgrades
279 # /usr/share/doc/unattended-upgrades# cat README.md
280 # /etc/apt/apt.conf.d/50unattended-upgrades
282 setup-debian-auto-update
285 # we've got a few dependencies later on, so install them now.
287 s eatmydata apt-get
-y install --purge --auto-remove "${simple_packages[@]}"
291 ### begin docker install ####
292 # https://store.docker.com/editions/community/docker-ce-server-debian?tab=description
293 pi software-properties-common apt-transport-https
294 curl
-fsSL https
://download.docker.com
/linux
/debian
/gpg | sudo apt-key add
-
295 sudo add-apt-repository \
296 "deb [arch=amd64] https://download.docker.com/linux/debian \
302 ### end docker install ####
307 # note, need python-certbot-nginx for nginx, but it depends on nginx,
308 # and I'm not installing nginx by default right now
309 if isdebian-testing
; then
310 pi
--install-suggests certbot
312 pi
--install-suggests -t jessie-backports certbot
314 # make a version of the certbot timer that emails me.
315 x
=/systemd
/system
/certbot
316 $sed -r -f - /lib
$x.timer
<<'EOF' |s dd of=/etc${x}mail.timer
317 s,^Description.*,\0 mail version,
319 $sed -r -f - /lib
$x.service
<<'EOF' |s dd of=/etc${x}mail.service
320 s,(ExecStart=)(/usr/bin/certbot),\1/a/bin/log-quiet/sysd-mail-once certbotmail \2 --renew-hook /a/bin/distro-setup/certbot-renew-hook,
323 sgo certbotmail.timer
326 # todo: other distros unknown
334 lj
) domain
=iank.bid
; exit 0 ;;
335 li
) domain
=iankelling.org
;;
337 /a
/h
/setup.sh
$domain
340 sudo
-E /a
/bin
/mediawiki-setup
/mw-setup-script
343 pi-nostart mumble-server
344 s
$sed -ri "s/^ *(serverpassword=).*/\1$(< /a/bin/bash_unpublished/mumble_pass)/" /etc
/mumble-server.ini
346 # do certificate to avoid warning about unsigned cert,
347 # which is overkill for my use, but hey, I'm cool, I know
349 web-conf apache2 mumble.iankelling.org
350 s
rm -f /etc
/apache
2/sites-enabled
/mumble.iankelling.org
352 export RENEWED_LINEAGE=/etc/letsencrypt/live/mumble.iankelling.org
353 /a/bin/distro-setup/certbot-renew-hook
359 tee /etc
/openvpn
/client-config
/mail <<'EOF'
360 ifconfig-push 10.8.0.4 255.255.255.0
364 sudo
dd of
=/etc
/systemd
/system
/vpnmail.service
<<EOF
366 Description=Turns on iptables mail nat
371 ExecStart=/a/bin/distro-setup/vpn-mail-forward start
372 ExecStop=/a/bin/distro-setup/vpn-mail-forward stop
375 WantedBy=openvpn.service
378 ser
enable vpnmail.service
379 # needed for li's local mail delivery.
380 tu
/etc
/hosts
<<<"10.8.0.4 mail.iankelling.org"
382 # setup let's encrypt cert
383 web-conf apache2 mail.iankelling.org
384 s rm /etc/apache2/sites-enabled/mail.iankelling.org{,-redir}.conf
387 domain=cal.iankelling.org
388 web-conf -f 10.8.0.4:5232 - apache2 $domain <<'EOF'
389 #https://httpd.apache.org/docs/2.4/mod/mod_authn_core.html#authtype
390 # https://stackoverflow.com/questions/5011102/apache-reverse-proxy-with-basic-authentication
392 Options +FollowSymLinks +Multiviews +Indexes
395 AuthName "Authentication Required"
396 # setup one time, with root:www-data, 640
397 AuthUserFile "/etc/caldav-htpasswd"
401 # nginx version of above would be:
402 # auth_basic "Not currently available";
403 # auth_basic_user_file /etc/nginx/caldav/htpasswd;
406 ########## begin pump.io setup ##########
408 # once pump adds a logrotation script, turn off nologger,
410 # "logfile": "/var/log/pumpio/pumpio.log",
412 s dd of=/etc/pump.io.json <<'EOF'
414 "secret": "SECRET_REPLACE_ME",
416 "params": { "dbname": "pumpio" },
418 "site": "pump.iankelling.org",
419 "owner": "Ian Kelling",
420 "ownerURL": "https://iankelling.org/",
423 "hostname": "pump.iankelling.org",
425 "datadir": "/home/pumpio/pumpdata",
426 "enableUploads": true,
427 "debugClient": false,
428 "disableRegistration": true,
430 "key": "/home/pumpio/privkey.pem",
431 "cert": "/home/pumpio/fullchain.pem",
432 "address": "localhost",
436 s sed -i "s#SECRET_REPLACE_ME#$(cat /p/c/machine_specific/li/pump-secret)#" /etc/pump.io.json
438 # jessie\'s node is too old
439 # https://nodejs.org/en/download/package-manager/
440 curl -sL https://deb.nodesource.com/setup_6.x | sudo -E bash -
444 git clone https://github.com/pump-io/pump.io.git
446 # note: doing this or the npm install pump.io as root had problems.
449 # normally, next command would be
450 # s npm install -g databank-mongodb
451 # but it\'s this until a bug in pump gets fixed
452 s npm install -g databank-mongodb@0.19.2
453 s useradd -m -s /bin/false pumpio
454 sudo -u pumpio mkdir -p /home/pumpio/pumpdata
455 # for testing browser when only listening to localhost,
456 # in the pump.io.json, set hostname localhost, urlPort 5233
457 #ssh -L 5233:localhost:5233 li
459 s mkdir -p /var/log/pumpio/
460 s chown pumpio:pumpio /var/log/pumpio/
462 web-conf - apache2 pump.iankelling.org <<'EOF'
463 # currently a bug in pump that we cant terminate ssl
466 ProxyPass / https://127.0.0.1:8001/
467 ProxyPassReverse / https://127.0.0.1:8001/
468 # i have sockjs disabled per people suggesting that
469 # it won\'t work with apache right now.
470 # not sure if it would work with this,
471 # but afaik, this is pointless atm.
472 <Location /main/realtime/sockjs/>
473 ProxyPass wss://127.0.0.1:8001/main/realtime/sockjs/
474 ProxyPassReverse wss://127.0.0.1:8001/main/realtime/sockjs/
479 export RENEWED_LINEAGE=/etc/letsencrypt/live/pump.iankelling.org
480 /a/bin/distro-setup/certbot-renew-hook
483 s dd of=/etc/systemd/system/pump.service <<'EOF'
486 After=syslog.target network.target
492 ExecStart=/home/iank/pump.io/bin/pump
493 Environment=NODE_ENV=production
494 # failed to find databank-mongodb without this.
495 # I just looked at my environment variables took a guess.
496 Environment=NODE_PATH=/usr/lib/nodejs:/usr/lib/node_modules:/usr/share/javascript
499 WantedBy=multi-user.target
503 ########## end pump.io setup ############
506 ############# begin setup mastodon ##############
508 # I'd like to try gnu social just cuz of gnu, but it's not being
509 # well maintained, for example, simple pull requests
511 # https://git.gnu.io/gnu/gnu-social/merge_requests/143
512 # and I submitted my own bugs, basic docs are broken
513 # https://git.gnu.io/gnu/gnu-social/issues/269
515 # note, docker required, but we installed it earlier
517 # i subscrubed to https://github.com/docker/compose/releases.atom
518 # to deal with updates manually. So far, it means just reving the
519 # version number, then restarting docker-compose with
521 # docker-compose up -d
522 curl -L https://github.com/docker/compose/releases/download/1.13.0/docker-compose-`uname -s`-`uname -m` | s dd of=/usr/local/bin/docker-compose
523 s chmod +x /usr/local/bin/docker-compose
527 i clone https://github.com/tootsuite/mastodon
529 # subbed to atom feed to deal with updates
530 git checkout $(git tag | grep -v rc | tail -n1)
532 # per instructions, uncomment redis/postgres persistence in docker-compose.yml
533 sed -i 's/^#//' docker-compose.yml
535 cat >.env.production <<'EOF'
544 LOCAL_DOMAIN=mast.iankelling.org
547 SINGLE_USER_MODE=true
552 SMTP_FROM_ADDRESS=notifications@mast.iankelling.org
553 SMTP_DOMAIN=mast.iankelling.org
554 SMTP_DELIVERY_METHOD=smtp
557 for key in PAPERCLIP_SECRET SECRET_KEY_BASE OTP_SECRET; do
558 printf "%s=%s" $key "$(docker-compose run --rm web rake secret)" >>.env.production
560 s cat /etc/mailpass| while read -r domain port pass; do
561 if [[ $domain == mail.iankelling.org ]]; then
562 printf "SMTP_PASSWORD=%s" "$pass" >>.env.production
569 docker-compose run --rm web rails assets:precompile
571 # docker daemon takes care of starting on boot.
574 s a2enmod proxy_wstunnel headers
575 web-conf -f 3000 - apache2 mast.iankelling.org <<'EOF'
577 RequestHeader set X-Forwarded-Proto "https"
578 ProxyPass /500.html !
579 ProxyPass /oops.png !
580 ProxyPass /api/v1/streaming/ ws://localhost:4000/
581 ProxyPassReverse /api/v1/streaming/ ws://localhost:4000/
582 ErrorDocument 500 /500.html
583 ErrorDocument 501 /500.html
584 ErrorDocument 502 /500.html
585 ErrorDocument 503 /500.html
586 ErrorDocument 504 /500.html
590 ############### !!!!!!!!!!!!!!!!!
591 ############### manual steps:
593 # only following 2 people atm, so not bothering to figure out backups
594 # when mastodon has not documented it at all.
599 # johns@status.fsf.org
601 # sign in page is at https://mast.iankelling.org/auth/sign_in
602 # register as iank, then
603 # https://github.com/tootsuite/documentation/blob/master/Running-Mastodon/Administration-guide.md
604 # docker-compose run --rm web bundle exec rails mastodon:make_admin USERNAME=iank
606 ############# end setup mastodon ##############
608 # we use nsupdate to update the ip of home
611 echo "$0: $(date): ending now)"
617 ########### end section including li/lj ###############
619 if [[ $HOSTNAME == treetowl ]]; then
621 # vpn-server setup via:
623 vpn-server-setup -r -d
624 s tee -a /etc/openvpn/server/server.conf <<'EOF'
625 push "dhcp-option DNS 192.168.1.1"
626 push "route 192.168.1.0 255.255.255.0"
627 client-connect /a/bin/distro-setup/vpn-client-connect
629 s sed -i --follow-symlinks 's/10.8./10.9./g' /etc/openvpn/server/server.conf
630 ser restart openvpn-server@server
631 vpn-mk-client-cert -s /etc/update-resolv-conf-home -c x2 -n home b8.nz
632 dir=/p/c/machine_specific/x2/filesystem/etc/openvpn/client
634 # background: We have these files locally, but we\'d have to duplicate the logic
635 # in vpn-mk-client-cert to get them, and this is just simpler.
636 scp root@x2:/etc/openvpn/client/home* $dir
640 # note, see bashrc for more documentation.
642 s dd of=/etc/systemd/system/rss2email.service <<'EOF'
644 Description=rss2email
645 After=multi-user.target
650 # about 24 hours of failures
651 # it copies over its files without respecting symlinks, so
652 # we pass options to use different location.
653 ExecStart=/a/bin/log-quiet/sysd-mail-once -288 rss2email r2e -d /p/c/rss2email.json -c /p/c/rss2email.cfg run
655 s dd of=/etc/systemd/system/rss2email.timer <<'EOF'
657 Description=rss2email
660 # for initial run. required.
662 # for subsequent runs.
663 OnUnitInactiveSec=300
666 WantedBy=timers.target
668 s systemctl daemon-reload
672 ######### begin pump.io periodic backup #############
673 if [[ $HOSTNAME == treetowl ]]; then
674 s dd of=/etc/systemd/system/pumpbackup.service <<'EOF'
676 Description=pump li backup
677 After=multi-user.target
682 ExecStart=/a/bin/log-quiet/sysd-mail-once pump-backup /a/bin/distro-setup/pump-backup
684 s dd of=/etc/systemd/system/pumpbackup.timer <<'EOF'
686 Description=pump li backup hourly
692 WantedBy=timers.target
694 s systemctl daemon-reload
697 ######### end pump.io periodic backup #############
700 debian|ubuntu|trisquel)
701 # suggests because we want the resolvconf package.
702 # todo: check other distros to make sure it\'s installed
703 pi-nostart --install-suggests openvpn
704 # pi-nostart does not disable
710 /a/bin/distro-setup/radicale-setup
712 ## android studio setup
713 # this contains the setting for android sdk to point to
714 # /a/opt/androidsdk, which is asked upon first run
715 lnf /a/opt/.AndroidStudio2.2 ~
716 # android site says it needs a bunch of packages for ubuntu,
717 # but I googled for debian, and someone says you just need lib32stdc++6 plus the
719 # https://pid7007blog.blogspot.com/2015/07/installing-android-studio-in-debian-8.html
720 # see w.org for more android studio details
721 spa lib32stdc++6 default-jdk
724 if [[ $HOSTNAME == treetowl ]]; then
725 ############# begin syncthing setup ###########
727 # It\'s simpler to just worry about running it in one place for now.
728 # I assume it would work to clone it\'s config to another non-phone
729 # and just run it in one place instead of the normal having a
730 # separate config. I lean toward using the same config, since btrfs
731 # syncs between comps.
733 arch) pi syncthing ;;
734 ubuntu|trisquel|debian)
735 # testing has relatively up to date packages
736 if ! isdebian-testing; then
737 # based on error when doing apt-get update:
738 # E: The method driver /usr/lib/apt/methods/https could not be found.
739 pi apt-transport-https
740 # google led me here:
741 # https://apt.syncthing.net/
742 curl -s https://syncthing.net/release-key.txt | sudo apt-key add -
743 s="deb http://apt.syncthing.net/ syncthing release"
744 if [[ $(cat /etc/apt/sources.list.d/syncthing.list) != $s ]]; then
745 echo "$s" | s dd of=/etc/apt/sources.list.d/syncthing.list
752 lnf -T /w/syncthing /home/iank/.config/syncthing
753 sgo syncthing@iank # runs as iank
755 # these things persist in ~/.config/syncthing, which I save in
756 # /w/syncthing (not in /p, because syncthing should continue to
757 # run on home server even when using laptop as primary device)
758 # open http://localhost:8384/
759 # change listen address from default to tcp://:22001,
760 # this is because we do port forward so it doesn\'t have to use
761 # some external server, but the syncthing is broken for port forward,
762 # you get a message, something "like connected to myself, this should not happen"
763 # when connecting to other local devices, so I bump the port up by 1,
765 # https://forum.syncthing.net/t/connected-to-myself-should-not-happen/1763/19.
766 # Without this, it was being stuck syncing at 0%.
767 # Set gui username and password.
769 # install syncthing via f-droid,
770 # folder setting, turn off master folder (makes it read only).
771 # on phone, add device, click bar code icon
772 # on dekstop, top right, actions, device id
773 # after adding, notification will appear on desktop to confirm
775 # syncing folder. from phone to desktop: select desktop in the
776 # folder on phone\'s sync options, notification will appear in
777 # desktop\'s web ui within a minute. For the reverse, the
778 # notification will appear in android\'s notifications, you have to
779 # swipe down and tap it to add the folder. It won\'t appear in the
780 # syncthing ui, which would be intuitive, but don\'t wait for it
783 # On phone, set settings to run syncthing all the time, and
784 # show no notification.
786 # Folder versioning would make sense if I didn\'t already use btrfs
787 # for backups. I would choose staggered, or trash can for more space.
789 # if needed to install on a remote comp:
790 # ssh -L 8384:localhost:8384 -N frodo
791 # open http://localhost:8384/
793 # Note, the other thing i did was port forward port 22000,
794 # per https://docs.syncthing.net/users/firewall.html
796 ############# end syncthing setup ###########
801 # no equivalent in other distros:
803 debian|ubuntu|trisquel)
804 # for gui bug reporting
810 ####### misc packages ###########
812 # nagstamon setting which were set through the ui
814 # all unknown sources
815 # all warning services
816 # acknowledged hosts & services
817 # hosts & services down for maintenence
818 # services on down hosts
819 # services on hosts in maintenece
820 # services on unreachable osts
821 # hosts in soft state
822 # services in soft state
823 # in display tab: icon in systray.
826 debian|ubuntu|trisquel)
827 # it asks if it should make users in it's group capture packets without root,
828 # which is arguably more secure than running wireshark as root. default is no,
829 # which is what i prefer, since I plan to use tcpdump to input to wireshark.
830 s DEBIAN_FRONTEND=noninteractive pi wireshark-gtk
837 debian|ubuntu|trisquel)
838 # no recommends because it wanted some other unstable package, something to
839 # do with math or something, which I didn't want to deal with.
840 p -y --no-install-recommends install python3-send2trash/unstable anki/unstable
846 debian|ubuntu|trisquel)
847 # note i had to do this, which is persistent:
849 # s chgrp debian-transmission torrents partial-torrents
851 # syslog says things like
852 # 'Failed to set receive buffer: requested 4194304, got 425984'
853 # google suggets giving it even more than that
854 tu /etc/sysctl.conf<<'EOF'
855 net.core.rmem_max = 67108864
856 net.core.wmem_max = 16777216
860 # some reason it doesn\'t seem to start automatically anyways
861 pi-nostart transmission-daemon
863 # the folder was moved here after an install around 02/2017.
864 # it contains runtime data,
865 # plus a simple symlink to the config file which it\'s
866 # not worth separating out.
867 s lnf -T /i/transmission-daemon /var/lib/transmission-daemon/.config/transmission-daemon
869 # config file documented here, and it\'s the same config
870 # for daemon vs client, so it\'s documented in the gui.
871 # https://trac.transmissionbt.com/wiki/EditConfigFiles#Options
873 # I originaly setup rpc-whitelist, but after using
874 # routing to a network namespace, it doesn\'t see the
875 # real source address, so it\'s disabled.
877 # Changed the cache-size to 256 mb, reduces disk use.
878 # It is a read & write cache.
882 p = '/etc/transmission-daemon/settings.json'
883 File.write(p, JSON.pretty_generate(JSON.parse(File.read(p)).merge({
884 'rpc-whitelist-enabled' => false,
885 'rpc-authentication-required' => false,
886 'incomplete-dir' => '/i/k/partial-torrents',
887 'incomplete-dir-enabled' => true,
888 'download-dir' => '/i/k/torrents',
889 "speed-limit-up" => 800,
890 "speed-limit-up-enabled" => true,
891 "peer-port" => 61486,
892 "cache-size-mb" => 256,
893 "ratio-limit" => 5.0,
894 "ratio-limit-enabled" => true,
898 # make sure its not enabled, not sure if this is needed
899 ser disable transmission-daemon
901 # todo: others unknown
903 # adapted from /var/lib/dpkg/info/transmission-daemon.postinst
904 if ! getent passwd debian-transmission > /dev/null; then
910 --home-dir /var/lib/transmission-daemon \
919 --disabled-password \
920 --home /var/lib/transmission-daemon \
925 if [[ $HOSTNAME == frodo ]]; then
926 sgo transmission-daemon-nn
930 ######### begin transmission client setup ######
932 if [[ -e /p/transmission-rpc-pass ]]; then
933 # arch had a default config,
934 # debian had nothing until you start it.
935 # With a little trial an error, here is a minimal config
936 # taken from the generated one, plus changes that the
937 # settings ui does, without a bunch of ui crap settings.
939 # only settings I set were
944 # the password is randomly generated on first run, i copied it out
945 # so it could be used by other hosts.
948 p = '/etc/transmission-daemon/settings.json'
949 s = JSON.parse(File.read(p))
950 s["rpc-password"] = File.read("/p/transmission-rpc-pass").chomp
951 File.write p, JSON.pretty_generate(s)
954 rpc_pass=$(</p/transmission-rpc-pass)
956 d=$f/.config/transmission-remote-gtk
959 s -u $u dd of=$d/config.json <<EOF
963 "profile-name" : "Default",
964 "hostname" : "transmission.b8.nz",
965 "rpc-url-path" : "/transmission/rpc",
967 "password" : "$rpc_pass",
968 "auto-connect" : true,
972 "update-active-only" : false,
973 "activeonly-fullsync-enabled" : false,
974 "activeonly-fullsync-every" : 2,
975 "update-interval" : 3,
976 "min-update-interval" : 3,
977 "session-update-interval" : 60,
985 "add-options-dialog" : false
991 # dunno why it\'s there, but get rid of it
993 li|lj) s rm -rf /home/linode ;;
1001 debian|ubuntu|trisquel)
1004 wget -nv -N https://dl.google.com/linux/direct/google-chrome-stable_current_amd64.deb
1007 s dpkg -i google-chrome-stable_current_amd64.deb |& tee $log
1013 # previously I had a more specific search, but dpkg
1014 # changed it\'s output as of 7/2016
1015 if grep 'dependency problems' \
1016 $log &>/dev/null; then
1017 s apt-get -fy install
1034 pi cups ghostscript gsfonts # from arch wiki cups page
1035 pi hplip # from google
1036 s gpasswd -a $USER sys # from arch wiki
1037 sgo org.cups.cupsd.service
1038 # goto http://127.0.0.1:631
1039 # administration tab, add new printer button.
1040 # In debian, I could use hte recommended driver,
1041 # in arch, I had to pick out the 6L driver.
1043 debian|ubuntu|trisquel)
1046 # other distros unknown
1051 ubuntu|debian) pi --no-install-recommends mairix notmuch ;;
1052 fedora|arch) spa mairix notmuch ;;
1055 arch) spa nfs-utils ;;
1056 ubuntu|debian) spa nfs-client ;;
1059 ubuntu|debian) spa par2 ;;
1060 arch|fedora) spa par2cmdline ;;
1063 # needed for my tex resume
1065 ubuntu|debian) spa texlive-full ;;
1066 arch) spa texlive-most ;;
1072 # flash, unrar, codecs, ms fonts.
1073 # This has a manual prompt.
1074 spa ubuntu-restricted-extras
1078 # rpm fusion recommended codecs
1079 s su -c "yum localinstall -y --nogpgcheck http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-$(rpm -E %fedora).noarch.rpm"
1080 pi gstreamer-plugins-ugly gstreamer-plugins-bad gstreamer-ffmpeg\
1081 xine-lib-extras-freeworld
1086 # optional dep for firefox for h.264 video
1087 arch) spa gst-libav ;;
1088 # other distros, probably come by default
1092 fedora|ubuntu|trisquel|debian) spa gnupg-agent ;;
1098 fedora) spa pinentry-gtk ;;
1099 *) : ;; # comes default or with other packages
1103 arch) spa firefox pulseaudio;;
1104 *) : ;; # comes default or with other packages
1109 arch) spa ttf-dejavu;;
1110 debian|ubuntu|trisquel) spa fonts-dejavu ;;
1116 arch) spa xorg-xev;;
1117 debian|ubuntu|trisquel) spa x11-utils ;;
1122 arch) pi virt-install;;&
1123 debian|ubuntu|trisquel) pi virtinst ;;&
1124 *) pi virt-manager ;; # creates the libvirt group in debian at least
1127 # allow user to run vms, from debian handbook
1128 for x in iank traci; do s usermod -a -G libvirt,kvm $x; done
1129 # bridge networking as user fails. google lead here, but it doesn\'t work:
1130 # oh well, I give up.
1131 # http://wiki.qemu.org/Features-Done/HelperNetworking
1133 # f=/etc/qemu/bridge.conf
1134 # s dd of=$f <<'EOF'
1137 # #s chown root:qemu $f # debian has somethig like qemu-libvirt. equivalent?
1143 debian|ubuntu|trisquel) spa genisoimage;;
1148 arch) spa spice-gtk3 ;;
1149 debian|ubuntu|trisquel) spa spice-client-gtk;;
1153 # general known for debian/ubuntu, not for fedora
1156 debian|ubuntu|trisquel)
1158 # a bit of googling, and added settings to bashrc
1159 go get -u github.com/mvdan/fdroidcl/cmd/fdroidcl
1167 # cdrkit for cloud-init isos
1168 # dnsmasq & ebtables for nat networking in libvirt
1169 # qemu for qemu-img, bind-tools for dig
1170 # dmidecode just because syslog complains
1171 pi unzip xorg-xmodmap dmidecode ebtables\
1172 bridge-utils dnsmasq qemu bind-tools
1173 # otherwise we get error about accessing kvm module.
1174 # seems like there might be a better way, but google was a bit vague.
1175 s $sed -ri '/^ *user *=/d' /etc/libvirt/qemu.conf
1176 echo 'user = "root"' | s tee -a /etc/libvirt/qemu.conf
1177 # https://bbs.archlinux.org/viewtopic.php?id=206206
1178 # # this should prolly go in the wiki
1180 # guessing this is not needed
1181 #sgo virtlogd.service
1188 arch) pi virtviewer ;;
1189 *) : ;; # other distros have it as a dependency afaik.
1195 fedora) cabal install shellcheck ;;
1196 *) spa shellcheck ;;
1197 # unknown for older ubuntu
1202 arch|debian|ubuntu|trisquel) spa pumpa ;;
1203 # others unknown. do have a buildscript:
1204 # /a/bin/buildscripts/pumpa ;;
1210 debian|ubuntu|trisquel) spa android-tools-adbd/unstable ;;
1211 arch) spa android-tools ;;
1212 # other distros unknown
1215 if [[ $HOSTNAME == treetowl ]]; then
1218 if [[ `debian-archive` == testing ]]; then
1219 # has no unstable dependencies
1220 pi bitcoind/unstable
1221 src=/a/opt/bitcoin/contrib/init/bitcoind.service
1222 s cp $src /etc/systemd/system
1223 p=/etc/bitcoin/bitcoin
1224 dst=/etc/systemd/system/bitcoinjm.service
1226 $sed -r "/^\s*ExecStart/s,${p}.conf,${p}jm.conf," $src \
1227 >/etc/systemd/system/bitcoinjm.service
1229 d=jm; jm=d # being clever for succinctness
1231 s $sed -ri "/^\s*\[Unit\]/a Conflicts=bitcoin${!s}.service" \
1232 /etc/systemd/system/bitcoin${s}.service
1239 s chown -R bitcoin:bitcoin $dir
1242 s chown -R root:bitcoin $dir
1245 # pruning decreases the bitcoin dir to 2 gb, keeps
1246 # just the recent blocks. can\'t do a few things like
1247 # import a wallet dump.
1248 # pruning works, but people had to do
1249 # some manual stuff in joinmarket. I dun need the
1250 # disk space, so not bothering yet, maybe in a year or so.
1251 # https://github.com/JoinMarket-Org/joinmarket/issues/431
1252 #https://bitcoin.org/en/release/v0.12.0#wallet-pruning
1258 # necessary for joinmarket, not bad in general
1259 rpcpassword=$(openssl rand -base64 32)
1260 rpcuser=$(openssl rand -base64 32)
1263 # dunno about sharing a wallet between multiple instances
1264 # manually did, wallet.dat symlinked in /nocow/.bitcoin
1268 # other distros unknown
1271 # ## disabling joinmarket, its too expensive
1272 # ### begin joinmarket setup ###
1276 # f=$dir/bitcoin.conf
1277 # f2=$dir/bitcoinjm.conf
1279 # s tee -a $f2 >/dev/null <<EOF
1281 # walletnotify=curl -sI --connect-timeout 1 http://localhost:62602/walletnotify?%s
1282 # alertnotify=curl -sI --connect-timeout 1 http://localhost:62602/alertnotify?%s
1283 # wallet=joinmarket.dat
1287 # # other distros unknown
1290 # pi libsodium-dev python-pip
1291 # cd /a/opt/joinmarket
1292 # # using develop branch, as it seems to be mostly bug fixes,
1293 # # and this is quite new software.
1294 # # note: python3 does not work.
1295 # # has seg fault error due to some bug, but it still works
1296 # pip install -r requirements.txt || [[ $? == 139 ]]
1297 # # note, the target must exist ahead of time, or bitcoin
1298 # # just overwrites the link, and it\'s not happy with an empty file,
1299 # # so we have to create the wallet, then move and link it.
1300 # s lnf -T /q/bitcoin/wallet.dat /nocow/.bitcoin/wallet.dat
1301 # s lnf -T /q/bitcoin/joinmarket.dat /nocow/.bitcoin/joinmarket.dat
1302 # # not technically needed, but seems cleaner not to have
1303 # # symlinks be root owned unlike everything else
1304 # s chown -h bitcoin:bitcoin /nocow/.bitcoin/*
1306 # for var in rpcuser rpcpassword; do
1307 # u="$(s sed -rn "s/^$var=(.*)/\1/p" /etc/bitcoin/bitcoin.conf)"
1308 # # escape backslashes
1309 # u="${u//\\/\\\\\\\\}"
1312 # sed -ri "s,^(rpc_${var#rpc}\s*=).*,\1 $u," joinmarket.cfg
1314 # sed -ri "s/^\s*(blockchain_source\s*=).*/\1 bitcoin-rpc/" joinmarket.cfg
1315 # ### end joinmarket setup ###
1324 wget http://tamacom.com/global/global-6.3.2.tar.gz
1327 # based on https://github.com/leoliu/ggtags
1328 ./configure --with-exuberant-ctags=/usr/bin/ctags
1331 s pip install pygments
1339 debian|ubuntu|trisquel)
1347 pi task-mate-desktop
1348 # in settings, change scrolling to two-finger,
1349 # because the default edge scroll doesn\'t work.
1358 # already in debian jessie
1365 # note this failed running at the beginning of this file,
1366 # because no systemd user instance was running.
1367 # Doing systemd --user resulted in
1368 # Trying to run as user instance, but $XDG_RUNTIME_DIR is not set
1370 if isdebian-testing; then
1371 # as of 7/2016, has no unstable deps, and is not in testing anymore.
1378 # # ubuntu unknown. probably the same as debian, just check if the
1379 # # init scripts come with the package.
1381 # # copied from arch, but moved to etc
1382 # s dd of=/etc/systemd/user/synergys.service <<'EOF'
1384 # Description=Synergy Server Daemon
1385 # After=network.target
1389 # ExecStart=/usr/bin/synergys --no-daemon --config /etc/synergy.conf
1390 # Restart=on-failure
1393 # WantedBy=multi-user.target
1395 # s dd of=/etc/systemd/user/synergys.socket <<'EOF'
1397 # Conflicts=synergys@.service
1400 # ListenStream=24800
1404 # WantedBy=sockets.target
1406 # # had this fail with 'Failed to connect to bus: No such file or directory'
1407 # # then when I tried it manually, it worked fine...
1408 # if ! systemctl --user daemon-reload; then
1410 # echo retrying systemd user daemon reload
1411 # systemctl --user daemon-reload
1415 # # taken from arch wiki.
1416 # s dd of=/etc/systemd/system/synergyc@.service <<'EOF'
1418 # Description=Synergy Client
1419 # After=network.target
1423 # ExecStart=/usr/bin/synergyc --no-daemon frodo
1424 # Restart=on-failure
1425 # # per man systemd.unit, StartLimitInterval, by default we
1426 # # restart more than 5 times in 10 seconds.
1427 # # And this param defaults too 200 miliseconds.
1431 # WantedBy=multi-user.target
1433 # s systemctl daemon-reload
1436 # ser enable synergyc@iank
1437 # ser start synergyc@iank ||: # X might not be running yet
1440 # systemctl --user start synergys ||:
1441 # systemctl --user enable synergys
1449 ### kdeconnect for gnome. started in /a/bin/distro-setup/desktop-20-autostart.sh
1450 pi libgtk-3-dev python3-requests-oauthlib valac cmake python-nautilus
1451 cd /a/opt/indicator-kdeconnect
1454 cmake .. -DCMAKE_INSTALL_PREFIX=/usr
1459 ######### end misc packages #########
1462 # packages I once used before and liked, but don\'t want installed now for
1464 # python-sqlite is used for offlineimap
1465 # lxappearance python-sqlite dolphin paman dconf-editor
1471 # todo, finish configuring smart.
1474 # mostly from https://wiki.archlinux.org/index.php/S.M.A.R.T.
1475 # turn on smart. background on options:
1476 # first line, -a = test everyting on all devices.
1477 # -S on, turn on disk internal saving of vendor specific info,
1478 # from google, seems like this is usually already on and fairly standard.
1479 # -o on, turn on 4 hour period non-performance degrading testing.
1480 # short test daily 2-3am, extended tests Saturdays between 3-4am:
1481 sched="-s (S/../.././02|L/../../6/03)"
1482 s sed -i --follow-symlinks "s#^[[:space:]]*DEVICESCAN.*#\
1483 DEVICESCAN -a -o on -S on -n standby,q $sched \
1484 -m ian@iankelling.org -M exec /usr/local/bin/smart-notify#" /etc/smartd.conf
1486 # in the default configuration of at least ubuntu 14.04, resolvconf is
1487 # configured to order any nameservers associated with tun* or tap*
1488 # before the normal internet interfaces, which means they are always
1489 # consulted first. This is often slower and undesirable, ie. local dns
1490 # queries go from 0ms to 10+ or 100+ ms. To reverse the ordering, you
1492 #sudo sed -i --follow-symlinks '/tun\*\|tap\*/d' /etc/resolvconf/interface-order
1493 # however, this breaks dns lookup for hosts on the openvpn lan.
1494 # I can\'t figure out why hosts on the normal lan would not be
1495 # broken under the default ordering, except the host I was
1496 # testing with previously had an entry in /etc/hosts.
1498 ############# end unfinished
1500 ########### misc stuff
1503 for dev in $(s btrfs fi show /boot | sed -nr 's#.*path\s+(\S+)$#\1#p'); do
1504 devs+=($(devbyid $dev),)
1506 devs[-1]=${devs[-1]%,} # jonied by commas
1508 # on grub upgrade, we get prompts unless we do this
1509 s debconf-set-selections <<EOF
1510 grub-pc grub-pc/install_devices multiselect ${devs[*]}
1514 # the wiki backup script from ofswiki.org uses generic paths
1515 s lnf /p/c/machine_specific/li/mw_vars /root
1516 s lnf /k/backup/wiki_backup /root
1518 s cedit /etc/goaccess.conf <<'EOF' || [[ $? == 1 ]]
1519 # all things found from looking around the default config
1520 # copied existing NCSA Combined Log Format with Virtual Host, plus %L
1521 log-format %^:%^ %h %^[%d:%t %^] "%r" %s %b "%R" "%u" %D
1522 time-format %H:%M:%S
1523 date-format %d/%b/%Y
1524 log-file /var/log/apache2/access.log
1527 # tip: copy access.log files to a stretch host directory, then run
1528 # jessie's goaccess is too old for some options, and it\'s
1529 # not easily installed from a testing.
1530 # goaccess --ignore-crawlers -f <(cat *) -a -o html > x.html
1535 debian|ubuntu|trisquel)
1536 case `debian-archive` in
1538 s dd of=/etc/apt/preferences.d/unison-gtk <<'EOF'
1539 Explanation: Allow unison-gtk to be upgraded
1541 Pin: release a=testing
1544 # dont think using testing is needed since I figured out how to
1545 # deal with mismatching unison compilers, but I dont
1546 # see any reason to revert it, since it only installs
1547 # a single package which is primarily a single binary
1551 pi unison-gtk/testing # after to make it the default unison
1560 # default is alsa, doesn\'t work with with pianobar
1561 s dd of=/etc/libao.conf <<'EOF'
1562 default_driver=pulse
1567 # note, for jessie, it depends on a higher version of btrfs-tools.
1569 # # disabled due to my patch being in btrbk
1571 # arch|debian|ubuntu|trisquel) pi btrbk ;;
1576 spa pv # for progress bar when running interactively.
1577 if [[ $HOSTNAME == treetowl ]]; then
1578 # backup/sync manually on others hosts for now.
1580 # note: to see when it was last run,
1588 debian|ubuntu|trisquel) s gpasswd -a iank adm ;; #needed for reading logs
1594 # https://www.torproject.org/docs/rpms.html.en
1595 # https://www.torproject.org/docs/debian.html.en
1596 # todo: figure out if the running service needs to be restarted upon updates
1599 # todo on fedora: setup non-dev packages
1601 s dd of=/etc/yum.repos.d/torproject.repo <<'EOF'
1603 name=Tor experimental repo
1605 baseurl=http://deb.torproject.org/torproject.org/rpm/tor-testing/fc/20/$basearch/
1607 gpgkey=http://deb.torproject.org/torproject.org/rpm/RPM-GPG-KEY-torproject.org.asc
1610 name=Tor experimental source repo
1613 baseurl=http://deb.torproject.org/torproject.org/rpm/tor-testing/fc/20/SRPMS
1615 gpgkey=http://deb.torproject.org/torproject.org/rpm/RPM-GPG-KEY-torproject.org.asc
1618 # to be secure, take a look at the fingerprint reported from the following install, and see if it matches from the link above:
1619 # 3B9E EEB9 7B1E 827B CF0A 0D96 8AF5 653C 5AC0 01F1
1621 /a/bin/buildscripts/tor-browser
1624 tu /etc/apt/sources.list "deb http://deb.torproject.org/torproject.org $(debian-codename) main"
1625 gpg --keyserver keys.gnupg.net --recv 886DDD89
1626 gpg --export A3C4F0F979CAA22CDBA8F512EE8CBC9E886DDD89 | sudo apt-key add -
1628 pi deb.torproject.org-keyring
1630 /a/bin/buildscripts/tor-browser
1634 /a/bin/buildscripts/tor-browser
1637 pi tor tor-browser-en
1647 fedora todo: disable the firewall or find a way to automate it.
1648 there's an unused section in t.org for tramikssion firewall setup
1650 fedora manual config for nfs:
1652 change to permanent configuration
1653 check the box for nfs
1654 was hard to figure this out, not sure if this is all needed, but
1656 mountd: udp/tcp 20048
1657 portmapper, in firewall-config its called rpc-bind: udp/tcp 111
1658 troubleshooting, unblock things in rpcinfo -p
1659 make sure to reload the firewall to load the persistent configuration
1666 debian|ubuntu|trisquel)
1670 pi nfs-utils || pending_reboot=true
1672 # this failed until I rebooted
1678 ########### begin kodi setup ############
1681 # based on https://wiki.debian.org/SecuringNFS
1682 # but the quota stuff is either outdated or optional,
1683 # i guessed that it was not needed and it worked fine.
1684 s dd of=/etc/sysctl.d/nfs-static-ports.conf <<'EOF'
1685 fs.nfs.nfs_callback_tcpport = 32764
1686 fs.nfs.nlm_tcpport = 32768
1687 fs.nfs.nlm_udpport = 32768
1690 s $sed -ri -f - /etc/default/nfs-common <<'EOF'
1692 $a STATDOPTS="--port 32765 --outgoing-port 32766"
1695 s $sed -ri -f - /etc/default/nfs-kernel-server <<'EOF'
1696 /^\s*RPCMOUNTDOPTS=/d
1697 $a RPCMOUNTDOPTS="--manage-gids --port 32767"
1699 ser restart nfs-kernel-server
1701 if [[ $HOSTNAME == treetowl ]]; then
1702 # persistent one time steps for webdav:
1703 # create persistent password, put it in ~/.kodi/userdata/advancedsettings.xml,
1704 # per http://kodi.wiki/view/MySQL/Sync_other_parts_of_Kodi
1705 # htpasswd -c /p/c/filesystem/etc/davpass dav
1706 # chmod 640 /p/c/filesystem/etc/davpass
1707 # in conflink, set group to www-data.
1708 # In kodi, i set the music source, server address: my domain,
1709 # path: k/music. Then copied the file
1710 # /p/c/subdir_files/.kodi/userdata/sources.xml to save that setting.
1711 s a2enmod dav dav_fs
1712 web-conf -r /a/c/playlists - apache2 dav.$HOME_DOMAIN <<'EOF'
1713 <Directory /a/c/playlists>
1716 AuthName "Authentication Required"
1717 AuthUserFile "/etc/davpass"
1720 # outside the standard /var/www, so use this:
1725 s mkdir -p /var/www/davlock
1726 s chown www-data:www-data /var/www/davlock
1727 s sed -i "1i DavLockDB /var/www/davlock/davlock" /etc/apache2/sites-enabled/dav.$HOME_DOMAIN.conf
1730 teeu /etc/exports "/k/music *(ro,nohide,async,no_subtree_check,insecure)"
1733 # kodi uses sqlite by default, but supports mysql.
1736 # see ofswiki.org for explanation.
1737 dbpass="$(cat /p/mysql-root-pass)"
1738 if ! echo exit|mysql -uroot "-p$dbpass"; then
1739 echo -e "\n\n$dbpass\n$dbpass\n\n\n\n\n" | mysql_secure_installation
1741 mysql -uroot "-p$dbpass" <<EOF
1742 GRANT ALL PRIVILEGES ON *.* TO 'kodi' IDENTIFIED BY '$(</p/mysql-kodi-pass)';
1744 s sed -ri 's/^(\s*bind-address\s*=).*/\1 0.0.0.0/' /etc/mysql/mariadb.conf.d/50-server.cnf
1749 ########### end kodi setup ############
1752 if [[ $HOSTNAME == treetowl ]]; then
1753 # nohide = export filesystems mounted deeper than the export point
1754 # fsid=0 makes this export the "root" export
1755 # not documented in the man page, but this means
1756 # 1. it can be mounted with a shorthand of server:/
1757 # 2. exports that are subdirectories of this one will automatically be mounted
1758 tu /etc/exports <<'EOF'
1759 /k 192.168.1.0/24(rw,fsid=0,nohide,no_root_squash,async,no_subtree_check,insecure)
1768 # persistent virtual machines
1771 debian|ubuntu|trisquel)
1776 # distro may not know about win 10 yet.
1778 if ! virt-install --os-variant list &>/dev/null; then # we are using a newer virt-install
1779 for v in 10 8.1 8; do
1780 if osinfo-query os | gr "^\s*win${v/./\\.}\s" &>/dev/null; then
1787 if ! s virsh list --all --name | grep -xF win10 &>/dev/null; then
1789 # created account with
1790 # win10vmian@outlook.com, and easy to remember password
1791 # win 10 virtio, makes disk way way way faster
1792 # wget https://fedorapeople.org/groups/virt/virtio-win/direct-downloads/latest-virtio/virtio-win.iso
1793 # https://wiki.archlinux.org/index.php/QEMU#Change_Existing_Windows_VM_to_use_virtio
1794 # for installing virtio after initial install instead of with initial iso:
1795 # qemu-img create -f qcow2 fake.qcow2 1G
1796 # --disk=/a/images/virtio-win.iso,device=cdrom \
1797 # --disk=/a/images/fake.qcow2,bus=virtio
1799 # went to device manager, saw 2 pci devices with yellow !,
1800 # did search for drivers, pick cdrom location, done.
1802 # from http://www.tenforums.com/tutorials/4189-fast-startup-turn-off-windows-10-a.html.
1803 # google said there was a control panel option for it, but
1804 # that turned out to be a lie.
1805 # Put this in a .bat file and run as administrator to turn off
1806 # hyberboot which fucks things up.
1807 # REG ADD "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Power" /V HiberbootEnabled /T REG_dWORD /D 0 /F
1808 # power settings, turn off display: never
1809 # run "control userpasswords2", turn on automatic login.
1810 # note: when changing devices, I just undefine, the create the vm again.
1812 if [[ -e /nocow/user/vms/win10.qcow2 ]]; then
1813 s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
1814 --disk=/a/images/win10.qcow2,bus=virtio --vcpus 2 -r 4096 -w bridge=br0 \
1815 -n win10 --import --os-variant $variant --cpu host-model-only
1817 s virsh destroy win10
1820 if [[ -e /nocow/user/vms/win7.qcow2 ]]; then
1821 # this one hasn\'t had the virtio fix done yet.
1822 s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
1823 --disk=/a/images/win7.qcow2 --vcpus 2 -r 4096 -w bridge=br0 \
1824 -n win7 --import --os-variant win7 --cpu host-model-only
1825 s virsh destroy win7
1826 # had a problem with --cpu host, so trying out
1827 # --cpu host-model-only
1832 if [[ $HOSTNAME == treetowl ]]; then
1834 # note samba re-reads it\'s config every 1 minute
1836 arch) s cp /etc/samba/smb.conf.default /etc/samba/smb.conf ;;
1839 # add 2 lines after workgroup option
1840 s sed -ri --follow-symlinks '/^\s*encrypt passwords\s*=/d' /etc/samba/smb.conf
1841 s sed -ri --follow-symlinks '/^\s*map to guest\s*=/d' /etc/samba/smb.conf
1842 s sed -i --follow-symlinks 's/\(\s*workgroup\s*=\).*/\1 WORKGROUP\n\tencrypt passwords = yes\n\tmap to guest = bad password/' /etc/samba/smb.conf
1843 # remove default homes section. not sharing that.
1844 s sed -ri --follow-symlinks '/^\s*\[homes\]/,/\s*\[/d' /etc/samba/smb.conf
1846 if ! grep -xF '[public]' /etc/samba/smb.conf &>/dev/null; then
1847 s tee -a /etc/samba/smb.conf <<'EOF'
1856 debian|ubuntu|trisquel)
1857 # systemd claims it generates units from /etc/init.d, but it
1858 # clearly doesn\'t in debian. I have no idea how they are
1859 # related. fuck debian right now. It\'s not documented. samba
1860 # has a systemd init file linked to /dev/null. There\'s this
1861 # https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=769714 which
1862 # claims samba\'s sub-services will be started automatically by
1863 # systemd... it didn\'t on install, wonder if it will on
1864 # boot. It clued me in how to start it manually though. Nothing
1865 # in /usr/share/doc/samba, debian admin guide says nothing about
1866 # any of this. (this is in debian testing as of 4/2016).
1868 s /etc/init.d/samba start
1876 tu /etc/hosts <<< "127.0.1.1 $(hostname).lan $(hostname)"
1879 ######### begin stuff belonging at the end ##########
1882 # Apps we want to override others for default file handler:
1883 # simplest way in debian is to just install them last.
1896 pi "${simple_packages[@]}"
1899 if $pending_reboot; then
1900 echo "$0: pending reboot and then finished. doing it now."
1903 echo "$0: $(date): ending now)"