2 # Copyright (C) 2016 Ian Kelling
4 # Licensed under the Apache License, Version 2.0 (the "License");
5 # you may not use this file except in compliance with the License.
6 # You may obtain a copy of the License at
8 # http://www.apache.org/licenses/LICENSE-2.0
10 # Unless required by applicable law or agreed to in writing, software
11 # distributed under the License is distributed on an "AS IS" BASIS,
12 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 # See the License for the specific language governing permissions and
14 # limitations under the License.
17 source /a
/bin
/errhandle
/err
18 src
="${BASH_SOURCE%/*}"
22 exec &> >(sudo
tee -a /var
/log
/distro-end
)
23 echo "$0: $(date): starting now)"
24 # see example of usage to understand.
27 IFS
= read -r -d '' y ||
:
30 spa
() { # simple package add
35 sed="sed --follow-symlinks"
46 ########### begin section including li ################
47 pi
${p3[@]} $
($src/distro-pkgs
)
65 # no equivalent in other distros:
67 debian|trisquel|ubuntu
)
68 if ! dpkg
-s apt-file
&>/dev
/null
; then
69 # this condition is just a speed optimization
79 # allows me to pipe with ssh -t, and gets rid of spam
80 # http://forums.debian.net/viewtopic.php?f=5&t=85822
81 # i'd rather disable the service than comment the init file
82 # this says disabling the service, it will still get restarted
83 # but this script doesn't do anything on restart, so it should be fine
84 s
dd of
=/var
/run
/motd.dynamic
if=/dev
/null
85 # stretch doesn't have initscripts pkg installed by default
86 if [[ $
(debian-codename
) == jessie
]]; then
87 s update-rc.d motd disable
91 # this isn't a complete solution. It still shows me when updates are available,
92 # but it's no big deal.
93 s t
/etc
/update-motd.d
/10-help-text /etc
/update-motd.d
/00-header
99 # https://debian-handbook.info/browse/stable/sect.regular-upgrades.html
100 # /etc/cron.daily/apt calls unattended-upgrades
101 # /usr/share/doc/unattended-upgrades# cat README.md
102 # /etc/apt/apt.conf.d/50unattended-upgrades
104 setup-debian-auto-update
108 ### begin docker install ####
110 # https://store.docker.com/editions/community/docker-ce-server-debian?tab=description
111 pi software-properties-common apt-transport-https
112 curl
-fsSL https
://download.docker.com
/linux
/$
(distro-name-compat
)/gpg | sudo apt-key add
-
113 url
=https
://download.docker.com
/linux
/$
(distro-name-compat
)
114 l
="deb [arch=amd64] $url $(debian-codename-compat) stable"
116 if ! grep -xFq "$l" /etc
/apt
/sources.list
{,.d
/*.list
}; then
117 sudo add-apt-repository
"$l"
120 # docker eats up a fair amount of cpu when doing nothing, so don't enable it unless
123 # and docker is even more crap, it ignores that it shouldnt start
129 # other distros unknown
131 ### end docker install ####
135 ### begin certbot install ###
138 # note, need python-certbot-nginx for nginx, but it depends on nginx,
139 # and I'm not installing nginx by default right now.
140 # note python-certbot-apache is in suggests, but so is a doc package that brought in xorg
141 if [[ $
(debian-codename
) == jessie
]]; then
142 pi
-t jessie-backports certbot python-certbot-apache
144 pi certbot python-certbot-apache
148 # not packaged in xenial or flidas
149 pi software-properties-common
150 l
="deb http://ppa.launchpad.net/certbot/certbot/ubuntu xenial main"
151 if ! grep -xFq "$l" /etc
/apt
/sources.list
{,.d
/*.list
}; then
152 s add-apt-repository
-y ppa
:certbot
/certbot ||
:
155 pi python-certbot-apache
157 # todo: other distros unknown
159 # make a version of the certbot timer that emails me.
160 x
=/systemd
/system
/certbot
161 $sed -r -f - /lib
$x.timer
<<'EOF' |s dd of=/etc${x}mail.timer
162 s,^Description.*,\0 mail version,
164 $sed -r -f - /lib
$x.service
<<'EOF' |s dd of=/etc${x}mail.service
165 s,(ExecStart=)(/usr/bin/certbot),\1/a/bin/log-quiet/sysd-mail-once certbotmail \2 --renew-hook /a/bin/distro-setup/certbot-renew-hook,
168 sgo certbotmail.timer
169 ### end certbot install ###
172 # dogcam setup. not using atm
175 # /a/bin/webcam/install-server
178 # /a/bin/webcam/install-client
185 ## prometheus node exporter setup
186 web-conf
-f 9100 -p 9101 apache2 $
(hostname
-f) <<'EOF'
187 #https://httpd.apache.org/docs/2.4/mod/mod_authn_core.html#authtype
188 # https://stackoverflow.com/questions/5011102/apache-reverse-proxy-with-basic-authentication
192 AuthName "Authentication Required"
193 # setup one time, with root:www-data, 640
194 AuthUserFile "/etc/prometheus-htpasswd"
204 lj
) domain
=iank.bid
; exit 0 ;;
205 li
) domain
=iankelling.org
;;
207 /a
/h
/setup.sh
$domain
210 sudo
-E /a
/bin
/mediawiki-setup
/mw-setup-script
212 pi-nostart mumble-server
213 s
$sed -ri "s/^ *(serverpassword=).*/\1$(< /a/bin/bash_unpublished/mumble_pass)/" /etc
/mumble-server.ini
215 # do certificate to avoid warning about unsigned cert,
216 # which is overkill for my use, but hey, I'm cool, I know
218 web-conf apache2 mumble.iankelling.org
219 s
rm -f /etc
/apache
2/sites-enabled
/mumble.iankelling.org
221 export RENEWED_LINEAGE=/etc/letsencrypt/live/mumble.iankelling.org
222 /a/bin/distro-setup/certbot-renew-hook
228 s
tee /etc
/openvpn
/client-config
/mail <<'EOF'
229 ifconfig-push 10.8.0.4 255.255.255.0
232 # it\'s strange. docker seems to make the default for forward
233 # be drop, but then I set it to accept and it\'s stuck that way,
234 # I dun know why. But, let\'s make sure we can forward anyways.
235 s DEBIAN_FRONTEND
=noninteractive pi iptables-persistent
236 rm /etc
/iptables
/rules.v6
237 s
tee /etc
/iptables
/rules.v4
<<'EOF'
239 -A FORWARD -i tun+ -o eth0 -j ACCEPT
240 -A FORWARD -i eth0 -o tun+ -j ACCEPT
245 sudo
dd of
=/etc
/systemd
/system
/vpnmail.service
<<EOF
247 Description=Turns on iptables mail nat
252 ExecStart=/a/bin/distro-setup/vpn-mail-forward start
253 ExecStop=/a/bin/distro-setup/vpn-mail-forward stop
256 WantedBy=openvpn.service
259 ser
enable vpnmail.service
260 # needed for li's local mail delivery.
261 tu
/etc
/hosts
<<<"10.8.0.4 mail.iankelling.org"
262 if [[ -e /lib/systemd/system/openvpn-server@.service ]]; then
263 vpn_service=openvpn-server@server
265 vpn_service=openvpn@server
268 # setup let's encrypt cert
269 web-conf apache2 mail.iankelling.org
270 s rm /etc/apache2/sites-enabled/mail.iankelling.org{,-redir}.conf
273 domain=cal.iankelling.org
274 web-conf -f 10.8.0.4:5232 - apache2 $domain <<'EOF'
275 #https://httpd.apache.org/docs/2.4/mod/mod_authn_core.html#authtype
276 # https://stackoverflow.com/questions/5011102/apache-reverse-proxy-with-basic-authentication
278 Options +FollowSymLinks +Multiviews +Indexes
281 AuthName "Authentication Required"
282 # setup one time, with root:www-data, 640
283 AuthUserFile "/etc/caldav-htpasswd"
287 # nginx version of above would be:
288 # auth_basic "Not currently available";
289 # auth_basic_user_file /etc/nginx/caldav/htpasswd;
292 ########## begin pump.io setup ##########
294 # once pump adds a logrotation script, turn off nologger,
296 # "logfile": "/var/log/pumpio/pumpio.log",
298 s dd of=/etc/pump.io.json <<'EOF'
300 "secret": "SECRET_REPLACE_ME",
302 "params": { "dbname": "pumpio" },
304 "site": "pump.iankelling.org",
305 "owner": "Ian Kelling",
306 "ownerURL": "https://iankelling.org/",
309 "hostname": "pump.iankelling.org",
311 "datadir": "/home/pumpio/pumpdata",
312 "enableUploads": true,
313 "debugClient": false,
314 "disableRegistration": true,
316 "key": "/home/pumpio/privkey.pem",
317 "cert": "/home/pumpio/fullchain.pem",
318 "address": "localhost",
322 s sed -i "s#SECRET_REPLACE_ME#$(cat /p/c/machine_specific/li/pump-secret)#" /etc/pump.io.json
324 # stretch node is too old
325 # https://nodejs.org/en/download/package-manager/
326 curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash -
327 pi nodejs graphicsmagick mongodb
329 if [[ -e pump.io ]]; then
333 git clone https://github.com/pump-io/pump.io.git
336 # note: these 2 commands seem
337 # note: doing this or the npm install pump.io as root had problems.
340 # normally, next command would be
341 # s npm install -g odb
342 # but it\'s this until a bug in pump gets fixed
343 # https://github.com/pump-io/pump.io/issues/1287
344 s npm install -g databank-mongodb@0.19.2
345 if ! getent passwd pumpio &>/dev/null; then
346 s useradd -Um -s /bin/false pumpio
348 sudo -u pumpio mkdir -p /home/pumpio/pumpdata
349 # for testing browser when only listening to localhost,
350 # in the pump.io.json, set hostname localhost, urlPort 5233
351 #ssh -L 5233:localhost:5233 li
353 s mkdir -p /var/log/pumpio/
354 s chown pumpio:pumpio /var/log/pumpio/
356 web-conf - apache2 pump.iankelling.org <<'EOF'
357 # currently a bug in pump that we cant terminate ssl
360 ProxyPass / https://127.0.0.1:8001/
361 ProxyPassReverse / https://127.0.0.1:8001/
362 # i have sockjs disabled per people suggesting that
363 # it won\'t work with apache right now.
364 # not sure if it would work with this,
365 # but afaik, this is pointless atm.
366 <Location /main/realtime/sockjs/>
367 ProxyPass wss://127.0.0.1:8001/main/realtime/sockjs/
368 ProxyPassReverse wss://127.0.0.1:8001/main/realtime/sockjs/
373 export RENEWED_LINEAGE=/etc/letsencrypt/live/pump.iankelling.org
374 /a/bin/distro-setup/certbot-renew-hook
377 s dd of=/etc/systemd/system/pump.service <<'EOF'
380 After=syslog.target network.target mongodb.service
381 Requires=mongodb.service
387 ExecStart=/home/iank/pump.io/bin/pump
388 Environment=NODE_ENV=production
389 # failed to find databank-mongodb without this.
390 # I just looked at my environment variables took a guess.
391 Environment=NODE_PATH=/usr/lib/nodejs:/usr/lib/node_modules:/usr/share/javascript
394 WantedBy=multi-user.target
398 ########## end pump.io setup ############
401 ############# begin setup mastodon ##############
403 # main doc is Docker-Guide.md in docs repo
405 # I'd like to try gnu social just cuz of gnu, but it's not being
406 # well maintained, for example, simple pull requests
408 # https://git.gnu.io/gnu/gnu-social/merge_requests/143
409 # and I submitted my own bugs, basic docs are broken
410 # https://git.gnu.io/gnu/gnu-social/issues/269
412 # note, docker required, but we installed it earlier
414 # i subscrubed to https://github.com/docker/compose/releases.atom
415 # to see release notes.
416 # i had some problems upgrading. blew things away with
417 # docker-compose down
418 # docker rmi $(docker images -q)
420 # when running docker-compose run, kernel stack traces are printed to the journal.
421 # things seem to succeed, google says nothing, so ignoring them.
422 curl -L https://github.com/docker/compose/releases/download/1.18.0/docker-compose-`uname -s`-`uname -m` | s dd of=/usr/local/bin/docker-compose
423 s chmod +x /usr/local/bin/docker-compose
428 i clone https://github.com/tootsuite/mastodon
430 # subbed to atom feed to deal with updates
431 git checkout $(git tag | grep -v rc | tail -n1)
433 # per instructions, uncomment redis/postgres persistence in docker-compose.yml
434 sed -i 's/^#//' docker-compose.yml
436 cat >.env.production <<'EOF'
445 LOCAL_DOMAIN=mast.iankelling.org
448 SINGLE_USER_MODE=true
450 SMTP_SERVER=mail.iankelling.org
453 SMTP_FROM_ADDRESS=notifications@mast.iankelling.org
454 SMTP_DOMAIN=mast.iankelling.org
455 SMTP_DELIVERY_METHOD=smtp
458 for key in PAPERCLIP_SECRET SECRET_KEY_BASE OTP_SECRET; do
459 # 1 minute 7 seconds to run this docker command
460 # to generate a secret, and it has ^M chars at the end. wtf. really dumb
461 printf "%s=%s\n" $key "$(docker-compose run --rm web rake secret|dos2unix|tail -n1)" >>.env.production
464 while read -r domain port pass; do
465 if [[ $domain == mail.iankelling.org ]]; then
467 # remove the username part
469 printf "SMTP_PASSWORD=%s\n" "$pass" >>.env.production
472 done < <(s cat /etc/mailpass)
474 echo "$0: error, failed to find mailpass domain for mastadon"
478 # docker compose makes an interface named like br-8f3e208558f2. we need mail to
480 if ! s /sbin/iptables -t nat -C PREROUTING -i br-+ -p tcp -m tcp --dport 25 -j DNAT --to-destination 10.8.0.4:25; then
481 s /sbin/iptables -t nat -A PREROUTING -i br-+ -p tcp -m tcp --dport 25 -j DNAT --to-destination 10.8.0.4:25
484 docker-compose run --rm web rake mastodon:webpush:generate_vapid_key | grep -E '^VAPID_PUBLIC_KEY=|^VAPID_PRIVATE_KEY=' >> .env.production
485 logq docker-compose run --rm web rake db:migrate
486 docker-compose run --rm web rails assets:precompile
488 # avatar failed to upload, did
489 # docker logs mastodon_web_1
490 # google lead me to this
491 s chown -R 991:991 public/system
493 # docker daemon takes care of starting on boot.
496 s a2enmod proxy_wstunnel headers
497 web-conf -f 3000 - apache2 mast.iankelling.org <<'EOF'
499 RequestHeader set X-Forwarded-Proto "https"
500 ProxyPass /500.html !
501 ProxyPass /oops.png !
502 ProxyPass /api/v1/streaming/ ws://localhost:4000/
503 ProxyPassReverse /api/v1/streaming/ ws://localhost:4000/
504 ErrorDocument 500 /500.html
505 ErrorDocument 501 /500.html
506 ErrorDocument 502 /500.html
507 ErrorDocument 503 /500.html
508 ErrorDocument 504 /500.html
512 ############### !!!!!!!!!!!!!!!!!
513 ############### manual steps:
515 # only following a few people atm, so not bothering to figure out backups
516 # when mastodon has not documented it at all.
521 # johns@status.fsf.org
523 # sign in page is at https://mast.iankelling.org/auth/sign_in
524 # register as iank, then
525 # https://github.com/tootsuite/documentation/blob/master/Running-Mastodon/Administration-guide.md
526 # docker-compose run --rm web bundle exec rails mastodon:make_admin USERNAME=iank
528 ############# end setup mastodon ##############
530 # we use nsupdate to update the ip of home
534 # znc config generated by doing
536 # selected port is also used in erc config
537 # comma separated channel list worked.
538 # while figuring things out, running znc -D for debug in foreground.
539 # to exit and save config:
540 # /msg *status shutdown
541 # configed auth on freenode by following
542 # https://wiki.znc.in/Sasl:
543 # /msg *sasl RequireAuth yes
544 # /msg *sasl Mechanism PLAIN
545 # /msg *sasl Set ident_name password
546 # created the system service after, and had to do
547 # mv /home/iank/.znc/* /var/lib/znc
548 # sed -i 's,/home/iank/.znc/,/var/lib/znc,' /var/lib/znc/config/znc.conf
549 # and made a copy of the config files into /p/c
550 # /msg *status LoadMod --type=global log -sanitize
551 # to get into the web interface,
552 # cat /etc/letsencrypt/live/iankelling.org/{privkey,cert,chain}.pem > /var/lib/znc/znc.pem
553 # then use non-main browser or else it doesn't allow it based on ocsp stapling from my main site.
554 # https://iankelling.org:12533/
555 # i'm going to figure out how to automate this when it expires. i know i can hook a script into the renewal. https://wiki.znc.in/FAQ seems to imply that znc doesn\'t need restart.
556 # todo: in config file AllowWeb = true should be false. better security if that is off unless we need it.
557 # /msg *status LoadMod --type=network perform
558 # /msg *perform add PRIVMSG ChanServ :invite #fsf-office
559 # /msg *perform add JOIN #fsf-office
562 # also ran /znc LoadMod clearbufferonmsg
563 # it would be nice if erc supported erc query buffers by doing
564 # /msg *status clearbuffer <name of the query/receiver
566 # an example seems to be here: https://github.com/zenspider/elisp/blob/master/rwd-irc.el
567 # if that was the case i could remove the module clearbufferonmsg
568 # alo would be nice if erc supported
569 # https://wiki.znc.in/self-message
570 # https://wiki.znc.in/Query_buffers \
572 s useradd --create-home -d /var/lib/znc --system --shell /sbin/nologin --comment "Account to run ZNC daemon" --user-group znc || [[ $? == 9 ]] # 9 if it exists already
573 chmod 700 /var/lib/znc
574 s chown -R znc:znc /var/lib/znc
575 s dd of=/etc/systemd/system/znc.service 2>/dev/null <<'EOF'
577 Description=ZNC, an advanced IRC bouncer
578 After=network-online.target
581 ExecStart=/usr/bin/znc -f --datadir=/var/lib/znc
585 WantedBy=multi-user.target
590 echo "$0: $(date): ending now)"
595 ########### end section including li/lj ###############
597 # depends gcc is a way to install suggests. this is apparently the only
598 # way to install suggests even if the main package is already
599 # installed. reinstall doesn't work, uninstalling can cause removing
600 # dependent packages.
601 pi ${pall[@]} $(apt-cache search ruby[.0-9]+-doc| awk '{print $1}') $(apt-cache depends gcc|grep -i suggests:| awk '{print $2}')
605 wget -O$x https://bootstrap.pypa.io/get-pip.py
609 sgo fsf-vpn-dns-cleanup
612 # website is dead june 14 2019
613 s rm -f /etc/apt/sources.list.d/iridium-browser.list
618 # wget -qO - https://downloads.iridiumbrowser.de/ubuntu/iridium-release-sign-01.pub|sudo apt-key add -
621 # deb [arch=amd64] https://downloads.iridiumbrowser.de/deb/ stable main
622 # #deb-src https://downloads.iridiumbrowser.de/deb/ stable main
624 # f=/etc/apt/sources.list.d/iridium-browser.list
625 # if ! diff -q $t $f; then
635 ### begin home vpn server setup
638 # # this section done initially to make persistent keys.
639 # # Also note, I temporarily set /etc/hosts so my host was
640 # # b8.nz when running this, since the vpn client config
641 # # generator assumes we need to go to that server to get
643 # vpn-server-setup -rds
644 # s cp -r --parents /etc/openvpn/easy-rsa/keys /p/c/filesystem
645 # s chown -R 1000:1000 /p/c/filesystem/etc/openvpn/easy-rsa/keys
646 # # kw = kgpe work machine.
647 # for host in x2 x3 kw; do
648 # vpn-mk-client-cert -b $host -n home b8.nz 1196
649 # dir=/p/c/machine_specific/$host/filesystem/etc/openvpn/client
651 # s bash -c "cp /etc/openvpn/client/home* $dir"
652 # # note: /etc/update-resolv-conf-home also exists for all systems with /p
655 # key already exists, so this won't generate one, just the configs.
656 vpn-server-setup -rds
657 s tee -a /etc/openvpn/server/server.conf <<'EOF'
658 push "dhcp-option DNS 10.0.0.1"
659 push "route 10.0.0.0 255.255.0.0"
660 client-connect /a/bin/distro-setup/vpn-client-connect
662 s sed -i --follow-symlinks 's/10.8./10.9./g;s/^\s*port\s.*/port 1196/' /etc/openvpn/server/server.conf
664 if [[ $HOSTNAME == tp ]]; then
665 if [[ -e /lib/systemd/system/openvpn-server@.service ]]; then
666 vpn_service=openvpn-server@server
668 vpn_service=openvpn@server
672 ### end vpn server setup
676 # note, see bashrc for more documentation.
678 s dd of=/etc/systemd/system/rss2email.service <<'EOF'
680 Description=rss2email
681 After=multi-user.target
686 # about 24 hours of failures
687 # it copies over its files without respecting symlinks, so
688 # we pass options to use different location.
689 ExecStart=/a/bin/log-quiet/sysd-mail-once -288 rss2email r2e -d /p/c/rss2email.json -c /p/c/rss2email.cfg run
691 s dd of=/etc/systemd/system/rss2email.timer <<'EOF'
693 Description=rss2email
696 # for initial run. required.
698 # for subsequent runs.
699 OnUnitInactiveSec=300
702 WantedBy=timers.target
704 s systemctl daemon-reload
707 ######### begin pump.io periodic backup #############
708 if [[ $HOSTNAME == frodo ]]; then
709 s dd of=/etc/systemd/system/pumpbackup.service <<'EOF'
711 Description=pump li backup
712 After=multi-user.target
717 ExecStart=/a/bin/log-quiet/sysd-mail-once pump-backup /a/bin/distro-setup/pump-backup
719 s dd of=/etc/systemd/system/pumpbackup.timer <<'EOF'
721 Description=pump li backup hourly
727 WantedBy=timers.target
729 s systemctl daemon-reload
732 ######### end pump.io periodic backup #############
734 # https://github.com/jlebon/textern
736 make native-install USER=1
739 debian|trisquel|ubuntu)
740 # suggests resolvconf package. installing it here is redundant, but make sure anyways.
741 # todo: check other distros to make sure it\'s installed
742 pi-nostart openvpn resolvconf
743 # pi-nostart does not disable
749 /a/bin/distro-setup/radicale-setup
751 ## android studio setup
752 # this contains the setting for android sdk to point to
753 # /a/opt/androidsdk, which is asked upon first run
754 lnf /a/opt/.AndroidStudio2.2 ~
755 # android site says it needs a bunch of packages for ubuntu,
756 # but I googled for debian, and someone says you just need lib32stdc++6 plus the
758 # https://pid7007blog.blogspot.com/2015/07/installing-android-studio-in-debian-8.html
759 # see w.org for more android studio details
760 spa lib32stdc++6 default-jdk
763 ############# begin syncthing setup ###########
764 if [[ $HOSTNAME == frodo ]]; then
765 # It\'s simpler to just worry about running it in one place for now.
766 # I assume it would work to clone it\'s config to another non-phone
767 # and just run it in one place instead of the normal having a
768 # separate config. I lean toward using the same config, since btrfs
769 # syncs between comps.
771 arch) pi syncthing ;;
772 trisquel|ubuntu|debian)
773 # testing has relatively up to date packages
774 if ! isdebian-testing; then
775 # based on error when doing apt-get update:
776 # E: The method driver /usr/lib/apt/methods/https could not be found.
777 pi apt-transport-https
778 # google led me here:
779 # https://apt.syncthing.net/
780 curl -s https://syncthing.net/release-key.txt | sudo apt-key add -
781 s="deb http://apt.syncthing.net/ syncthing release"
782 if [[ $(cat /etc/apt/sources.list.d/syncthing.list) != $s ]]; then
783 echo "$s" | s dd of=/etc/apt/sources.list.d/syncthing.list
790 lnf -T /w/syncthing /home/iank/.config/syncthing
791 ser daemon-reload # syncthing likely not properly packaged
792 sgo syncthing@iank # runs as iank
794 # these things persist in ~/.config/syncthing, which I save in
795 # /w/syncthing (not in /p, because syncthing should continue to
796 # run on home server even when using laptop as primary device)
797 # open http://localhost:8384/
798 # change listen address from default to tcp://:22001,
799 # this is because we do port forward so it doesn\'t have to use
800 # some external server, but the syncthing is broken for port forward,
801 # you get a message, something "like connected to myself, this should not happen"
802 # when connecting to other local devices, so I bump the port up by 1,
804 # https://forum.syncthing.net/t/connected-to-myself-should-not-happen/1763/19.
805 # Without this, it was being stuck syncing at 0%.
806 # Set gui username and password.
808 # install syncthing via f-droid,
809 # folder setting, turn off send only.
810 # on phone, add device, click bar code icon
811 # on dekstop, top right, actions, device id
812 # after adding, notification will appear on desktop to confirm
814 # syncing folder. from phone to desktop: select desktop in the
815 # folder on phone\'s sync options, notification will appear in
816 # desktop\'s web ui within a minute. For the reverse, the
817 # notification will appear in android\'s notifications, you have to
818 # swipe down and tap it to add the folder. It won\'t appear in the
819 # syncthing ui, which would be intuitive, but don\'t wait for it
820 # there. The notification may not work, instead open the web gui
821 # from in the app, there should be a notification within there.
823 # On phone, set settings to run syncthing all the time, and
824 # show no notification.
826 # Folder versioning would make sense if I didn\'t already use btrfs
827 # for backups. I would choose staggered, or trash can for more space.
829 # if needed to install on a remote comp:
830 # ssh -L 8384:localhost:8384 -N frodo
831 # open http://localhost:8384/
833 # Note, the other thing i did was port forward port 22000,
834 # per https://docs.syncthing.net/users/firewall.html
837 ############# end syncthing setup ###########
841 ####### begin misc packages ###########
843 # sakura config is owned by ian
846 sudo -u traci -i reset-konsole
847 # traci xscreensaver we don't want to reset
851 # this would install from cabal for newer / consistent version across os, but it screws up xmonad, so disabled for now.
852 # this is also in primary-setup
853 # pi libxss-dev # dependency based on build failure
855 # cabal install --upgrade-dependencies --force-reinstalls arbtt
856 # also, i assume syncing this between machines somehow messed thin
857 #lnf -T /m/arbtt-capture.log ~/.arbtt/capture.log
861 if [[ ! -e ~/.linphonerc && -e /p/.linphonerc-initial ]]; then
862 cp /p/.linphonerc-initial ~/.linphonerc
866 ### begin spd install
867 pi libswitch-perl libdigest-md5-file-perl libgnupg-interface-perl
869 wget -O $t http://mirror.fsf.org/fsfsys-trisquel/fsfsys-trisquel/pool/main/s/spd-perl/spd-perl_0.2-1_amd64.deb
872 # this guesses at the appropriate directory, adjust if needed
873 x=(/usr/lib/x86_64-linux-gnu/perl/5.*)
874 sudo ln -sf ../../../perl/5.18.2/SPD/ $x
875 # newer distro had gpg2 as default, older one, flidas, need to make it that way
878 s mkdir -p /usr/local/spdhackfix
879 s lnf -T $x /usr/local/spdhackfix/gpg
884 if [[ $HOSTNAME == kw ]]; then
886 NOTE: after this finishes, i did
888 # remove br from auto:
889 s vim /etc/network/interfaces
893 # nagstamon setting which were set through the ui
895 # all unknown sources
896 # all warning services
897 # acknowledged hosts & services
898 # hosts & services down for maintenence
899 # services on down hosts
900 # services on hosts in maintenece
901 # services on unreachable osts
902 # hosts in soft state
903 # services in soft state
904 # in display tab: fullscreen
906 # these translate to these settings I think
907 # filter_acknowledged_hosts_services = True
908 # filter_all_unknown_services = True
909 # filter_all_warning_services = True
910 # filter_hosts_in_soft_state = True
911 # filter_hosts_services_maintenance = True
912 # filter_services_in_soft_state = True
913 # filter_services_on_down_hosts = True
914 # filter_services_on_hosts_in_maintenance = True
915 # filter_services_on_unreachable_hosts = True
916 # notify_if_up = False
917 # statusbar_floating = False
919 # but i'm just going to rely on the webpage plus sms for now.
923 debian|trisquel|ubuntu)
924 # it asks if it should make users in it's group capture packets without root,
925 # which is arguably more secure than running wireshark as root. default is no,
926 # which is what i prefer, since I plan to use tcpdump to input to wireshark.
927 s DEBIAN_FRONTEND=noninteractive pi wireshark-gtk
932 case $(debian-codename) in
933 # needed for debootstrap scripts for fai since fai requires debian
935 curl http://archive.ubuntu.com/ubuntu/project/ubuntu-archive-keyring.gpg | s apt-key add -
936 s dd of=/etc/apt/preferences.d/flidas-xenial <<EOF
938 Pin: release a=xenial
942 Pin: release a=xenial-updates
946 Pin: release a=xenial-security
949 s dd of=/etc/apt/sources.list.d/xenial.list 2>/dev/null <<EOF
950 deb http://us.archive.ubuntu.com/ubuntu/ xenial main
951 deb http://us.archive.ubuntu.com/ubuntu/ xenial-updates main
952 deb http://us.archive.ubuntu.com/ubuntu/ xenial-security main
955 s apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 3B4FE6ACC0B21F32
956 s dd of=/etc/apt/preferences.d/flidas-bionic <<EOF
958 Pin: release a=bionic
962 Pin: release a=bionic-updates
966 Pin: release a=bionic-security
970 # better to run btrfs-progs which matches our kernel version
971 # (note, renamed from btrfs-tools)
972 s dd of=/etc/apt/preferences.d/btrfs-progs <<EOF
973 Package: btrfs-progs libzstd1
974 Pin: release a=bionic
977 Package: btrfs-progs libzstd1
978 Pin: release a=bionic-updates
981 Package: btrfs-progs libzstd1
982 Pin: release a=bionic-security
989 deb http://us.archive.ubuntu.com/ubuntu/ bionic main
990 deb http://us.archive.ubuntu.com/ubuntu/ bionic-updates main
991 deb http://us.archive.ubuntu.com/ubuntu/ bionic-security main
993 f=/etc/apt/sources.list.d/bionic.list
994 if ! diff -q $t $f; then
1000 # no special reason, but its better for btrfs-progs to
1001 # be closer to our kernel version
1006 aptitude download debootstrap/xenial
1009 s cp ./usr/share/debootstrap/scripts/* /usr/share/debootstrap/scripts
1014 # /run and /dev/shm are listed as required for pulseaudio. All 4 in the group
1015 # listed in the default config as suggested.
1016 # /run/usr/1000 i noticed was missing for pulseaudio
1017 # /run/user/0 just seemed like a not bad idea, given the above
1018 tu /etc/schroot/desktop/fstab <<'EOF'
1019 /run /run none rw,bind 0 0
1020 /run/lock /run/lock none rw,bind 0 0
1021 /dev/shm /dev/shm none rw,bind 0 0
1022 /run/shm /run/shm none rw,bind 0 0
1023 /run/user/1000 /run/user/1000 none rw,bind 0 0
1024 /run/user/1001 /run/user/1001 none rw,bind 0 0
1025 /run/user/0 /run/user/0 none rw,bind 0 0
1033 repo=http://archive.ubuntu.com/ubuntu/
1036 repo=http://deb.debian.org/debian/
1041 if schroot -l | grep -xFq chroot:$n; then
1042 echo "$0: $n schroot already installed, skipping"
1047 s dd of=/etc/schroot/chroot.d/$n.conf <<EOF
1053 preserve-environment=true
1056 if [[ -e $d/bin ]]; then
1057 s chroot $d apt-get update
1058 s chroot $d apt-get -y dist-upgrade --purge --auto-remove
1059 cd; s schroot -c $n -- apt-get install --allow-unauthenticated -y ${apps[@]}
1063 s debootstrap $n $d $repo
1064 cd; s schroot -c $n -- apt-get install --allow-unauthenticated -y ${apps[@]}
1066 s cp -P {,$d}/etc/localtime
1068 s dd of=/etc/systemd/system/schrootupdate.service <<'EOF'
1070 Description=schrootupdate
1071 After=multi-user.target
1075 ExecStart=/a/bin/log-quiet/sysd-mail-once schrootupdate /a/bin/distro-setup/schrootupdate
1077 s dd of=/etc/systemd/system/schrootupdate.timer <<'EOF'
1079 Description=schrootupdate
1082 OnCalendar=*-*-* 04:20:00
1085 WantedBy=timers.target
1087 s systemctl daemon-reload
1088 sgo schrootupdate.timer
1096 mkschroot debian stretch firefox-esr pulseaudio chromium
1100 s mkdir -p /nocow/user
1101 s chown $USER:$USER /nocow/user
1110 # adapted from /var/lib/dpkg/info/transmission-daemon.postinst
1111 # 450 seems likely to be unused. we need to specify one or else
1112 # it won't be stable across installs.
1113 if ! getent passwd debian-transmission > /dev/null; then
1114 s groupadd -g 450 debian-transmission
1122 --home-dir /var/lib/transmission-daemon \
1123 --shell /bin/false \
1132 --disabled-password \
1133 --home /var/lib/transmission-daemon \
1138 # We want group writable stuff from transmission.
1139 # However, after setting this, I learn that transmission sets it's
1140 # own umask based on it's settings file. Well, no harm leaving this
1141 # so it's set right from the beginning.
1142 s chfn debian-transmission -o umask=0002
1145 debian|trisquel|ubuntu)
1146 # note i had to do this, which is persistent:
1148 # s chgrp debian-transmission torrents partial-torrents
1150 # syslog says things like
1151 # 'Failed to set receive buffer: requested 4194304, got 425984'
1152 # google suggets giving it even more than that
1153 tu /etc/sysctl.conf<<'EOF'
1154 net.core.rmem_max = 67108864
1155 net.core.wmem_max = 16777216
1159 # some reason it doesn\'t seem to start automatically anyways
1160 pi-nostart transmission-daemon
1161 # be extra sure its not started
1162 ser disable transmission-daemon
1163 ser stop transmission-daemon
1165 # the folder was moved here after an install around 02/2017.
1166 # it contains runtime data,
1167 # plus a simple symlink to the config file which it\'s
1168 # not worth separating out.
1169 # between comps, the uid can change
1170 f=/i/transmission-daemon
1171 s lnf -T $f /var/lib/transmission-daemon/.config/transmission-daemon
1172 if [[ -e $f ]]; then
1173 s chown -R debian-transmission:debian-transmission $f
1175 for f in /i/k/partial-torrents /i/k/torrents; do
1176 if [[ -e $f ]]; then
1177 s chown -R debian-transmission:traci $f
1180 s chown -R debian-transmission:debian-transmission /var/lib/transmission-daemon
1182 # config file documented here, and it\'s the same config
1183 # for daemon vs client, so it\'s documented in the gui.
1184 # https://trac.transmissionbt.com/wiki/EditConfigFiles#Options
1186 # I originaly setup rpc-whitelist, but after using
1187 # routing to a network namespace, it doesn\'t see the
1188 # real source address, so it\'s disabled.
1190 # Changed the cache-size to 256 mb, reduces disk use.
1191 # It is a read & write cache.
1195 p = '/etc/transmission-daemon/settings.json'
1196 File.write(p, JSON.pretty_generate(JSON.parse(File.read(p)).merge({
1197 'rpc-whitelist-enabled' => false,
1198 'rpc-authentication-required' => false,
1199 'incomplete-dir' => '/i/k/partial-torrents',
1200 'incomplete-dir-enabled' => true,
1201 'download-dir' => '/i/k/torrents',
1202 "speed-limit-up" => 800,
1203 "speed-limit-up-enabled" => true,
1204 "peer-port" => 61486,
1205 "cache-size-mb" => 256,
1206 "ratio-limit" => 5.0,
1207 "ratio-limit-enabled" => true,
1212 # todo: others unknown
1217 # trisquel 8 = openvpn, debian stretch = openvpn-client
1218 vpn_ser=openvpn-client
1219 if [[ ! -e /lib/systemd/system/openvpn-client@.service ]]; then
1223 s dd of=/etc/systemd/system/transmission-daemon-nn.service <<EOF
1225 Description=Transmission BitTorrent Daemon netns
1226 After=network.target
1227 Requires=${vpn_ser}-nn@client.service
1228 After=${vpn_ser}-nn@client.service
1229 JoinsNamespaceOf=${vpn_ser}-nn@client.service
1232 #User=debian-transmission
1233 # notify type doesn't work with sudo
1235 ExecStart=/usr/bin/nsenter --mount=/root/mount_namespaces/client sudo -u debian-transmission /usr/bin/transmission-daemon -f --log-error
1236 ExecReload=/bin/kill -s HUP \$MAINPID
1241 WantedBy=multi-user.target
1245 if [[ $HOSTNAME == frodo ]]; then
1246 sgo transmission-daemon-nn
1250 ######### begin transmission client setup ######
1252 if [[ -e /p/transmission-rpc-pass ]]; then
1253 # arch had a default config,
1254 # debian had nothing until you start it.
1255 # With a little trial an error, here is a minimal config
1256 # taken from the generated one, plus changes that the
1257 # settings ui does, without a bunch of ui crap settings.
1259 # only settings I set were
1264 # the password is randomly generated on first run, i copied it out
1265 # so it could be used by other hosts.
1268 p = '/etc/transmission-daemon/settings.json'
1269 s = JSON.parse(File.read(p))
1270 s["rpc-password"] = File.read("/p/transmission-rpc-pass").chomp
1271 # default is 0022 (18 in decimal)
1273 File.write p, JSON.pretty_generate(s)
1276 rpc_pass=$(</p/transmission-rpc-pass)
1277 for f in /home/*; do
1278 d=$f/.config/transmission-remote-gtk
1281 s -u $u dd of=$d/config.json <<EOF
1285 "profile-name" : "Default",
1286 "hostname" : "transmission.b8.nz",
1287 "rpc-url-path" : "/transmission/rpc",
1289 "password" : "$rpc_pass",
1290 "auto-connect" : true,
1294 "update-active-only" : false,
1295 "activeonly-fullsync-enabled" : false,
1296 "activeonly-fullsync-every" : 2,
1297 "update-interval" : 3,
1298 "min-update-interval" : 3,
1299 "session-update-interval" : 60,
1307 "add-options-dialog" : false
1312 ######### end transmission client setup ######
1314 # dunno why it\'s there, but get rid of it
1316 li|lj) s rm -rf /home/linode ;;
1323 pi cups ghostscript gsfonts # from arch wiki cups page
1324 pi hplip # from google
1325 s gpasswd -a $USER sys # from arch wiki
1326 sgo org.cups.cupsd.service
1328 debian|trisquel|ubuntu)
1330 s gpasswd -a $USER lpadmin # based on ubuntu wiki
1333 # other distros unknown
1335 # goto http://127.0.0.1:631
1336 # administration tab, add new printer button.
1337 # In debian, I could use hte recommended driver,
1338 # in arch, I had to pick out the 6L driver.
1341 # allow user to run vms, from debian handbook
1342 for x in iank traci; do s usermod -a -G libvirt,kvm $x; done
1343 # bridge networking as user fails. google lead here, but it doesn\'t work:
1344 # oh well, I give up.
1345 # http://wiki.qemu.org/Features-Done/HelperNetworking
1347 # f=/etc/qemu/bridge.conf
1348 # s dd of=$f <<'EOF'
1351 # #s chown root:qemu $f # debian has somethig like qemu-libvirt. equivalent?
1354 # general known for debian/ubuntu, not for fedora
1357 debian|trisquel|ubuntu)
1358 if ! type -p go &>/dev/null; then
1360 # just the latest stable at the time of writing
1361 # TODO, maybe put this all into a build script,
1362 # and do some automatic updates
1363 wget -q https://dl.google.com/go/go1.12.4.linux-amd64.tar.gz
1364 s tar -C /usr/local -xzf go1.12.4.linux-amd64.tar.gz
1367 go get -u mvdan.cc/fdroidcl
1368 # a bit of googling, and added settings to bashrc
1375 # otherwise we get error about accessing kvm module.
1376 # seems like there might be a better way, but google was a bit vague.
1377 s $sed -ri '/^ *user *=/d' /etc/libvirt/qemu.conf
1378 echo 'user = "root"' | s tee -a /etc/libvirt/qemu.conf
1379 # guessing this is not needed
1380 #sgo virtlogd.service
1382 # iank: disabed as im not using libvirt usually
1383 # # https://bbs.archlinux.org/viewtopic.php?id=206206
1384 # # # this should prolly go in the wiki
1385 # sgo virtlogd.socket
1388 debian|trisquel|ubuntu)
1389 pi-nostart virtinst virt-manager
1398 wget ftp://ftp.gnu.org/pub/gnu/global/global-6.5.7.tar.gz
1401 # based on https://github.com/leoliu/ggtags
1402 ./configure --with-exuberant-ctags=/usr/bin/ctags
1405 pip install pygments
1413 debian|trisquel|ubuntu)
1421 # note this failed running at the beginning of this file,
1422 # because no systemd user instance was running.
1423 # Doing systemd --user resulted in
1424 # Trying to run as user instance, but $XDG_RUNTIME_DIR is not set
1426 if isdebian-testing; then
1427 # as of 7/2016, has no unstable deps, and is not in testing anymore.
1434 # # ubuntu unknown. probably the same as debian, just check if the
1435 # # init scripts come with the package.
1437 # # copied from arch, but moved to etc
1438 # s dd of=/etc/systemd/user/synergys.service <<'EOF'
1440 # Description=Synergy Server Daemon
1441 # After=network.target
1445 # ExecStart=/usr/bin/synergys --no-daemon --config /etc/synergy.conf
1446 # Restart=on-failure
1449 # WantedBy=multi-user.target
1451 # s dd of=/etc/systemd/user/synergys.socket <<'EOF'
1453 # Conflicts=synergys@.service
1456 # ListenStream=24800
1460 # WantedBy=sockets.target
1462 # # had this fail with 'Failed to connect to bus: No such file or directory'
1463 # # then when I tried it manually, it worked fine...
1464 # if ! systemctl --user daemon-reload; then
1466 # echo retrying systemd user daemon reload
1467 # systemctl --user daemon-reload
1471 # # taken from arch wiki.
1472 # s dd of=/etc/systemd/system/synergyc@.service <<'EOF'
1474 # Description=Synergy Client
1475 # After=network.target
1479 # ExecStart=/usr/bin/synergyc --no-daemon frodo
1480 # Restart=on-failure
1481 # # per man systemd.unit, StartLimitInterval, by default we
1482 # # restart more than 5 times in 10 seconds.
1483 # # And this param defaults too 200 miliseconds.
1487 # WantedBy=multi-user.target
1489 # s systemctl daemon-reload
1492 # ser enable synergyc@iank
1493 # ser start synergyc@iank ||: # X might not be running yet
1496 # systemctl --user start synergys ||:
1497 # systemctl --user enable synergys
1504 pi --no-install-recommends kdeconnect-plasma
1505 ### kdeconnect for gnome. started in /a/bin/distro-setup/desktop-20-autostart.sh
1506 ### but gnome + xmonad not working in flidas, so i disabled it
1507 pi libgtk-3-dev python3-requests-oauthlib valac cmake python-nautilus libappindicator3-dev
1508 cd /a/opt/indicator-kdeconnect
1511 cmake .. -DCMAKE_INSTALL_PREFIX=/usr
1514 # we can start it manually with /usr/lib/x86_64-linux-gnu/libexec/kdeconnectd
1515 # it seems, according to
1516 # /etc/xdg/autostart/kdeconnectd.desktop
1517 # I'm not seeing the icon, but the clipboard replication is working
1520 ### model 01 arduino support ###
1521 # https://github.com/keyboardio/Kaleidoscope/wiki/Install-Arduino-support-on-Linux
1522 # also built latest arduino in /a/opt/Arduino, (just cd build; ant build; ant run )
1523 # set arduino var in bashrc,
1524 # have system config file setup too.
1525 sudo adduser $USER dialout
1528 sudo usermod -a -G uucp $USER
1532 # this is for the mail command too. update-alternatives is kind of misleading
1533 # since at least it's main commands pretend mail does not exist.
1534 # bsd's mail got pulled in on some dumb dependency, i dunno how.
1535 s update-alternatives --set mailx /usr/bin/mail.mailutils
1537 ######### end misc packages #########
1540 # packages I once used before and liked, but don\'t want installed now for
1542 # python-sqlite is used for offlineimap
1543 # lxappearance python-sqlite dolphin paman dconf-editor
1549 # todo, finish configuring smart.
1552 # mostly from https://wiki.archlinux.org/index.php/S.M.A.R.T.
1553 # turn on smart. background on options:
1554 # first line, -a = test everyting on all devices.
1555 # -S on, turn on disk internal saving of vendor specific info,
1556 # from google, seems like this is usually already on and fairly standard.
1557 # -o on, turn on 4 hour period non-performance degrading testing.
1558 # short test daily 2-3am, extended tests Saturdays between 3-4am:
1559 sched="-s (S/../.././02|L/../../6/03)"
1560 s sed -i --follow-symlinks "s#^[[:space:]]*DEVICESCAN.*#\
1561 DEVICESCAN -a -o on -S on -n standby,q $sched \
1562 -m ian@iankelling.org -M exec /usr/local/bin/smart-notify#" /etc/smartd.conf
1564 # in the default configuration of at least ubuntu 14.04, resolvconf is
1565 # configured to order any nameservers associated with tun* or tap*
1566 # before the normal internet interfaces, which means they are always
1567 # consulted first. This is often slower and undesirable, ie. local dns
1568 # queries go from 0ms to 10+ or 100+ ms. To reverse the ordering, you
1570 #sudo sed -i --follow-symlinks '/tun\*\|tap\*/d' /etc/resolvconf/interface-order
1571 # however, this breaks dns lookup for hosts on the openvpn lan.
1572 # I can\'t figure out why hosts on the normal lan would not be
1573 # broken under the default ordering, except the host I was
1574 # testing with previously had an entry in /etc/hosts.
1576 ############# end unfinished
1578 ########### misc stuff
1580 # make networkmanager use resolvconf instead of its own dnsmasq which
1581 # conflicts with the normal dnsmasq package.
1582 f=/etc/NetworkManager/NetworkManager.conf
1584 s sed -ri '/ *\[main\]/,/^ *\[[^]]+\]/{/^\s*dns[[:space:]=]/d}' $f
1585 if [[ $m != $(md5sum $f) ]]; then
1586 srestart NetworkManager
1589 # make my /etc/fonts/conf.d/ get used.
1590 # I have a new sans-serif font there because the default one
1591 # displays l and I as the same char, grrrrr.
1594 /a/bin/distro-setup/mymimes
1600 # stop autopoping windows when i plug in an android phone.
1601 # dbus-launch makes this work within an ssh connection, otherwise you get this message,
1602 # with still 0 exit code.
1603 # dconf-WARNING **: failed to commit changes to dconf: Cannot autolaunch D-Bus without X11 $DISPLAY
1604 dbus-launch gsettings set org.gnome.desktop.media-handling automount-open false
1607 # on grub upgrade, we get prompts unless we do this
1609 for dev in $(s btrfs fi show /boot | sed -nr 's#.*path\s+(\S+)$#\1#p'); do
1610 devs+=($(devbyid $dev),)
1612 devs[-1]=${devs[-1]%,} # jonied by commas
1613 s debconf-set-selections <<EOF
1614 grub-pc grub-pc/install_devices multiselect ${devs[*]}
1618 sgo btrfsmaint.timer
1619 sgo btrfsmaintstop.timer
1622 # the wiki backup script from ofswiki.org uses generic paths
1623 s lnf /p/c/machine_specific/li/mw_vars /root
1624 s lnf /k/backup/wiki_backup /root
1626 s cedit /etc/goaccess.conf <<'EOF' || [[ $? == 1 ]]
1627 # all things found from looking around the default config
1628 # copied existing NCSA Combined Log Format with Virtual Host, plus %L
1629 log-format %^:%^ %h %^[%d:%t %^] "%r" %s %b "%R" "%u" %D
1630 time-format %H:%M:%S
1631 date-format %d/%b/%Y
1632 log-file /var/log/apache2/access.log
1635 # tip: copy access.log files to a stretch host directory, then run
1636 # jessie's goaccess is too old for some options, and it\'s
1637 # not easily installed from a testing.
1638 # goaccess --ignore-crawlers -f <(cat *) -a -o html > x.html
1643 trisquel|ubuntu|debian)
1644 # unison-gtk second, i want it to be default, not sure if that works
1645 # with spa. note, I used to install from testing repo when using stable,
1646 # but it shouldn't be needed since I wrote a script to handle mismatching
1648 spa unison unison-gtk
1657 # default is alsa, doesn\'t work with with pianobar
1658 s dd of=/etc/libao.conf <<'EOF'
1659 default_driver=pulse
1664 # note, for jessie, it depends on a higher version of btrfs-tools.
1666 # # disabled due to my patch being in btrbk
1668 # arch|debian|trisquel|ubuntu) pi btrbk ;;
1674 # ian: temporarily disabled while hosts are in flux.
1675 # if [[ $HOSTNAME == tp ]]; then
1676 # # backup/sync manually on others hosts for now.
1678 # # note: to see when it was last run,
1684 In mate settings settings, change scrolling to two-finger,
1685 because the default edge scroll doesn\'t work. Originally found this in debian.
1690 # remove dep that came in with desktop
1697 debian|trisquel|ubuntu) s gpasswd -a iank adm ;; #needed for reading logs
1700 /a/bin/buildscripts/pithosfly
1705 # https://www.torproject.org/docs/rpms.html.en
1706 # https://www.torproject.org/docs/debian.html.en
1707 # todo: figure out if the running service needs to be restarted upon updates
1708 # todo on fedora: setup non-dev packages
1710 s dd of=/etc/yum.repos.d/torproject.repo <<'EOF'
1712 name=Tor experimental repo
1714 baseurl=http://deb.torproject.org/torproject.org/rpm/tor-testing/fc/20/$basearch/
1716 gpgkey=http://deb.torproject.org/torproject.org/rpm/RPM-GPG-KEY-torproject.org.asc
1719 name=Tor experimental source repo
1722 baseurl=http://deb.torproject.org/torproject.org/rpm/tor-testing/fc/20/SRPMS
1724 gpgkey=http://deb.torproject.org/torproject.org/rpm/RPM-GPG-KEY-torproject.org.asc
1727 # to be secure, take a look at the fingerprint reported from the following install, and see if it matches from the link above:
1728 # 3B9E EEB9 7B1E 827B CF0A 0D96 8AF5 653C 5AC0 01F1
1730 /a/bin/buildscripts/tor-browser
1733 tu /etc/apt/sources.list "deb http://deb.torproject.org/torproject.org $(debian-codename) main"
1734 gpg --keyserver keys.gnupg.net --recv 886DDD89
1735 gpg --export A3C4F0F979CAA22CDBA8F512EE8CBC9E886DDD89 | sudo apt-key add -
1737 pi deb.torproject.org-keyring
1739 /a/bin/buildscripts/tor-browser
1743 /a/bin/buildscripts/tor-browser
1746 pi tor tor-browser-en
1756 fedora todo: disable the firewall or find a way to automate it.
1757 there's an unused section in t.org for tramikssion firewall setup
1759 fedora manual config for nfs:
1761 change to permanent configuration
1762 check the box for nfs
1763 was hard to figure this out, not sure if this is all needed, but
1765 mountd: udp/tcp 20048
1766 portmapper, in firewall-config its called rpc-bind: udp/tcp 111
1767 troubleshooting, unblock things in rpcinfo -p
1768 make sure to reload the firewall to load the persistent configuration
1775 debian|trisquel|ubuntu)
1779 pi nfs-utils || pending_reboot=true
1781 # this failed until I rebooted
1786 # networkmanager has this nasty behavior on flidas: if the machine
1787 # crashes with dnsmasq running, on subsequent boot, it adds an entry to
1788 # resolvconf for 127.0.0.1 in some stupid attempt to restore
1790 # This can be manually fixed by stoping dnsmasq,
1791 # then based on whats in /run/dnsmasq/, i see we can run
1792 # s resolvconf -d NetworkManager
1793 # oh ya, and stoping NetworkManager leaves this crap behind without cleaning it up.
1794 ser stop NetworkManager
1795 ser disable NetworkManager
1798 if [[ $HOSTNAME == frodo ]]; then
1799 # nohide = export filesystems mounted deeper than the export point
1800 # fsid=0 makes this export the "root" export
1801 # not documented in the man page, but this means
1802 # 1. it can be mounted with a shorthand of server:/
1803 # 2. exports that are subdirectories of this one will automatically be mounted
1804 tu /etc/exports <<'EOF'
1805 /k 10.0.0.0/24(rw,fsid=0,nohide,no_root_squash,async,no_subtree_check,insecure)
1815 # if I was going to create a persistent vm, i might do it like this:
1816 # variant=something # from: virt-install --os-variant list
1817 # s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
1818 # --disk=/a/images/some_name.qcow2,bus=virtio --vcpus 2 -r 4096 -w bridge=br0 \
1819 # -n some_name --import --os-variant $variant --cpu host-model-only
1823 ######### begin stuff belonging at the end ##########
1826 if $pending_reboot; then
1827 echo "$0: pending reboot and then finished. doing it now."
1830 echo "$0: $(date): ending now)"