#!/bin/bash
-# Copyright (C) 2019 Ian Kelling
-# SPDX-License-Identifier: AGPL-3.0-or-later
+# I, Ian Kelling, follow the GNU license recommendations at
+# https://www.gnu.org/licenses/license-recommendations.en.html. They
+# recommend that small programs, < 300 lines, be licensed under the
+# Apache License 2.0. This file contains or is part of one or more small
+# programs. If a small program grows beyond 300 lines, I plan to switch
+# its license to GPL.
+# Copyright 2024 Ian Kelling
+
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+
+# http://www.apache.org/licenses/LICENSE-2.0
+
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+# usage:
+#
+# * left click seconds to reset & enable main timer which shows 30
+# minutes in blue and half hours in orange.
+#
+# * right click seconds to disable minutes & half hours of main timer
+#
+# * left click minutes to reset & enable 2nd timer.
+#
+# * right click minutes to disable 2nd timer
+
+# docs:
+#
+# Sections from right to left.
+#
+# section #1, labeled day_percent
+#
+# 1. Thousandths of a 16 hour day left. 1 = 57.6 seconds.
+# 2. Bar of one thousand of a day which gets shorter by ninths. One ninth is 6.4 seconds.
+# 3. Start of the day (only the non-zero numbers). Set this with the ds command.
+# 4. The time right now.
+# 5. Ten thousands of the year left. 1 = 52:34 minutes (leap year = 52:42)
+# 6. Bar of 1/10,000 of a year shrinking by ninths. 1 ninth = 5:50 minutes (leap year = 5:51 mins).
+#
+# section #2, labeled seconds
+#
+# block characters, ▉, are added every 3 seconds, a total of 20 for 1
+# minute. The groups of 5 blocks = 15 seconds each.
+#
+# section #3, labeled mins
+#
+# Only enabled by clicking on seconds, see usage.
+#
+# Block characters are added every minute until 30, then reset. There
+# are 6 groups of 5 minutes.
+#
+# Section #4
+#
+# Half hours in orange, grouped into groups of 2. This will grow until
+# it fills the screen.
+#
+# Section #5 & 6
+#
+# Only enabled by clicking on mins section, see usage.
+#
+# These repeat sections 3 and 4 in violet and some other color.
+#
+#
if [ -z "$BASH_VERSION" ]; then echo "error: shell is not bash" >&2; exit 1; fi
-source /a/bin/errhandle/err
+source /a/bin/bash-bear-trap/bash-bear
shopt -s nullglob
shopt -s dotglob
-shopt -s nullglob
-for p in ~/.gem/ruby/*/bin; do
- PATH="$PATH:$p"
-done
-
-todaycache=/tmp/timetraptoday
-newer() {
- if [[ ! -e $todaycache ]]; then
- return 1
+tmp_focus1=$(mktemp)
+tmp_focus2=$(mktemp)
+
+mins=0
+half_hours=0
+start=$EPOCHSECONDS
+domins=false
+
+if date -d 'february 29' &>/dev/null; then
+ days_in_this_year=366
+else
+ days_in_this_year=365
+fi
+
+
+get_daystart() {
+ if [[ /b/data/daystart -ot /b/data/daystart-generated && $day_start_24h ]]; then
+ return 0
+ fi
+ day_start_24h=$(cat /b/data/daystart)
+ day_start_sig_digits=${day_start_24h%?}
+ day_start_sig_digits=${day_start_sig_digits%0}
+ day_start_hour=${day_start_24h%??}
+ day_start_min=${day_start_24h: -2}
+ echo $day_start_hour > /b/data/daystart-generated
+ echo $day_start_min >> /b/data/daystart-generated
+ day_start=$(date -d $day_start_hour:$day_start_min +%s)
+ # for after midnight but before the day start.
+ if (( day_start > EPOCHSECONDS )); then
+ day_start=$(date -d "$day_start_hour:$day_start_min yesterday" +%s)
fi
- ! find $todaycache -mmin $1 -type f -exec false {} + &>/dev/null
}
-td() { /a/opt/timetrap/bin/t d -ftotal all -m '^w|x$' "$@"; }
+
main() {
+ get_daystart
+
+ ## debug
+ # if [[ $line ]]; then
+ # echo "line=$line" >>/tmp/t
+ # fi
+ case $line in
+ ""|"[") : ;;
+ *)
+ json="${line#,}"
+ case $(echo "$json" | jq -r .name) in
+ seconds)
+ case $(echo "$json" | jq -r .button) in
+ # left click
+ 1)
+ start=$EPOCHSECONDS
+ domins=true
+ ;;
+ # right click
+ 3)
+ domins=false
+ ;;
+ esac
+ ;;
+ mins)
+ case $(echo "$json" | jq -r .button) in
+ 1)
+ start2=$EPOCHSECONDS
+ ;;
+ 3)
+ start2=
+ ;;
+ esac
+
+ ;;
+ esac
+ esac
+
+ time=$((EPOCHSECONDS - start))
+ total_mins=$(( time / 60 ))
+ mins=$(( total_mins % 30 ))
+ half_hours=$(( total_mins / 30 ))
+
+
+
+ printf '['
- ps_char=
- if [[ -e /dev/shm/iank-status ]]; then
- eval $(< /dev/shm/iank-status)
+ if [[ -e /dev/shm/iank-status && ! -e /tmp/quiet-status ]]; then
+ ps_char=
+ eval "$(< /dev/shm/iank-status)"
fi
- # clocked in or out?
- cursheet=$(sqlite3 /p/.timetrap.db "select sheet from entries where end is NULL;")
+ touch --date="10 minutes ago" $tmp_focus1
+ touch --date="30 minutes ago" $tmp_focus2
+ f=/tmp/focus-last-input
- if [[ $cursheet ]]; then
- if i3-msg -t get_bar_config bar-0 | grep '"mode":"dock"' &>/dev/null; then
- i3-msg -q 'bar mode hide'
- fi
- else
- if i3-msg -t get_bar_config bar-0 | grep '"mode":"hide"' &>/dev/null; then
- i3-msg -q 'bar mode dock'
- fi
- cursheet=out
+ # We output a reminder to do input to the focus app if we haven't done
+ # it less 10 minutes ago (but dont bother if its been more than 30
+ # minutes, maybe we aren't running it anymore.)
+ if [[ -e $f && $tmp_focus2 -ot $f && $tmp_focus1 -nt $f ]]; then
+ ps_char="=======FOCUS====== $ps_char"
fi
- # maybe sometime show work and x separate
- if newer 3; then
- today=$(< /tmp/timetraptoday)
- elif newer 10; then
- today=$(< /tmp/timetraptoday)
- td -s today >/tmp/timetraptoday &
- else
- today=$(td -s today)
- echo "$today" >/tmp/timetraptoday
+ if [[ -e /tmp/iank-i3-no-auto ]]; then
+ ps_char="$ps_char I"
+ fi
+ if [[ -e /tmp/no-obs-auto-scene-switch ]]; then
+ ps_char="$ps_char O"
fi
- # hours remaining in the day:
-
- # work+study in the last week, not counting today.
- # no arg to printf for the intentional behavior of no arg
- # shellcheck disable=SC2183
- cache=/tmp/timetrap$(printf '%(%F)T')
- if [[ -e $cache ]]; then
- eval $(<$cache)
- else
- week=$(td -s '8 days ago' -e 'yesterday')
- printf 'week="%s"\n' "$week" >$cache
- week4=$(td -s '29 days ago' -e 'yesterday')
- printf 'week4="%s"\n' "$week4" >>$cache
+
+ printf '{ "name":"status", "color":"#ED297D", "full_text": "%s' "$ps_char"
+ printf '"},'
+
+
+ if [[ $start2 ]]; then
+ time2=$((EPOCHSECONDS - start2))
+ total_mins2=$(( time2 / 60 ))
+ mins2=$(( total_mins2 % 30 ))
+ half_hours2=$(( total_mins2 / 30 ))
+ # this is duplicate of mins and half hours except for different
+ # colors and looking at vars above.
+
+ # begin half hours
+ printf '{ "color": "#EFC93E", "full_text": "'
+ for ((i=half_hours2-1; i >= 0 ; i--)); do
+ printf ▉
+ if (( i > 0 && i % 2 == 0 )); then
+ printf " "
+ fi
+ done
+ printf '"},'
+
+
+ # begin minutes
+ printf '{ "name":"mins2", "color":"#ED297D", "full_text": "'
+ for ((i=29; i >= 0 ; i--)); do
+ if (( i < mins2 )); then
+ printf ▉
+ else
+ printf " "
+ fi
+ if (( i > 0 && i % 5 == 0 )); then
+ printf " "
+ fi
+ done
+ printf '"},'
+
fi
- # weekly work+study in the last 4 weeks, not counting today.
- # todo later:
- # 4 weeks
- # ($x4week + $w4week + .05) /4
- #weekly work+study in the last 16 weeks, not counting today.
- #weekly work+study in the last 52 weeks, not counting today.
-
- unixtime=$EPOCHSECONDS
- midnight=$(date +%s -d 'tomorrow 00:00')
- tmp=($(echo "scale=1; today_left=($midnight-$unixtime) / 60 / 60;
-today_left;
-done_today=($today + .05) /1;
-/* hours I could do today by working 80% of the remainder time */
-today_left * .8 + done_today;
-done_today;
-($week + .05) /1;
-($week4 + .05) /4"|bc))
- printf "[ { \"full_text\": \""
- if [[ $ps_char ]]; then
- printf "%s| " "$ps_char"
+
+ if $domins; then
+ # begin half hours
+ printf '{ "color": "#FFB542", "full_text": "'
+ for ((i=half_hours-1; i >= 0 ; i--)); do
+ printf ▉
+ if (( i > 0 && i % 2 == 0 )); then
+ printf " "
+ fi
+ done
+ printf '"},'
+
+
+ # begin minutes
+ printf '{ "name":"mins", "color":"#0D6BDD", "full_text": "'
+ for ((i=29; i >= 0 ; i--)); do
+ if (( i < mins )); then
+ printf ▉
+ else
+ printf " "
+ fi
+ if (( i > 0 && i % 5 == 0 )); then
+ printf " "
+ fi
+ done
+ printf '"},'
+ fi
+
+ # begin seconds
+ printf '{ "name": "seconds", "full_text": "'
+
+ for ((i=0; i < 20; i++)); do
+ # This first condition is to make the transition from full to empty
+ # be less jarring. We are filling a bucket of space with ticks of
+ # time, we would have to choose to show full or empty, but never
+ # both. Or we could have a half/tick to show full then empty real
+ # quick. I decided to try having it work like a snake, empty out the
+ # 1st quarter as we fill up the last quarter.
+
+ if (( i > 0 && i % 5 == 0 )); then
+ printf " "
+ fi
+ i_end=$(( time % 60 / 3 + 1 ))
+ if (( i_end - i > 15 )); then
+ printf " "
+ elif (( i_end == 1 && i == 0 )); then
+ printf B
+ elif (( i < i_end )); then
+ printf ▉
+ else
+ printf " "
+ fi
+ done
+ printf '"},'
+
+ ## begin day percent, in thousandths, plus a spark block for ten_thousandth.
+ printf '{ "name": "day_percent", "full_text": "'
+
+
+ # after 24 hours, reset the day start
+ if (( day_start + 24 * 60 * 60 < EPOCHSECONDS )); then
+ day_start=$(date -d $day_start_hour:$day_start_min +%s)
fi
- printf "%s | left today %s %s | today %s | week %s | 4weeks %s | %s\" } ],\n" "$cursheet" "${tmp[@]}" "$(date "+%A, %B %d, %r")"
+
+ # there are 9 spark levels, 1/9 = .111.... In order to keep it in bash math, we upscale
+ # the number and divide by 111, 3 digits is good enough accuracy.
+ spark_index="$(( (1000000 -(EPOCHSECONDS - day_start)*1000000 / (16*60*60) ) % 1000 / 111 ))"
+ spark=" ▁▂▃▄▅▆▇█"
+ # note: 960 minutes, so 10 minutes is about 1%
+ day_thousandth=$(( 1000 - (EPOCHSECONDS - day_start)*1000 / (16*60*60) ))
+ printf %s "$day_thousandth${spark:spark_index:1}$day_start_sig_digits $(date "+%l:%M")"
+
+ # .1% of a waking year is ~5.75 hours, or 365 thousandths of a day.
+ # 1% of a waking year is 3.7 days
+ # A spark line of a thousandth of a waking year is 39 minutes.
+ year_start=$(date +%s -d 'january 1 6am')
+ year_days=$(( (EPOCHSECONDS - year_start) / (24*60*60) ))
+ year_start=$(( year_start + year_days * 8*60*60 ))
+ year_spark_index=$(( ( 1000000 - (EPOCHSECONDS - year_start)*1000000 / (days_in_this_year*16*60*60) ) % 1000 / 111 ))
+ year_tenthousandth=$(( 10000 - (EPOCHSECONDS - year_start)*10000 / (days_in_this_year*16*60*60) ))
+ printf %s " $year_tenthousandth${spark:year_spark_index:1}"
+
+
+ echo '"}
+],
+'
}
-# pass any arg and we just run once
+
+# pass any arg and we just run once. mainly for debugging
if (( $# )); then
main
+
+ # debug
+ #echo date -d $day_start_hour:$day_start_min +%s
+ #echo day_start=$day_start now=$EPOCHSECONDS
+
else
- printf '{ "version": 1 }\n['
+ printf '{ "version": 1, "click_events": true }\n['
while true; do
- main
- sleep 5
+ if [[ -e /tmp/noi3bar ]]; then
+ sleep 10
+ else
+ main
+ line=
+ read -r -t 3 line ||:
+ fi
done
fi
+
+rm -f $tmp_focus1 $tmp_focus2
iankelling.org / git / distro-setup / blobdiff