# Copyright (C) 2019 Ian Kelling
# SPDX-License-Identifier: AGPL-3.0-or-later
+# todo: max line length macro changed in t11. look into it
+# todo: check that all macros we use are still valid in t11
# todo: setup an alert for bouncing test emails.
i /etc/systemd/system/clamav-daemon.service.d/fix.conf <<EOF
[Service]
-ExecStartPre=-/bin/mkdir /var/run/clamav
+ExecStartPre=-/bin/mkdir -p /var/run/clamav
ExecStartPre=/bin/chown clamav /var/run/clamav
EOF
;;
esac
+# * wghole (another mail vpn)
+
+if $bhost_t; then
+ i /etc/systemd/system/wg-quick@wghole.service.d/override.conf <<'EOF'
+[Unit]
+StartLimitIntervalSec=0
+
+[Service]
+Restart=on-failure
+RestartSec=20
+EOF
+fi
+
# * spamassassin config
i /etc/sysctl.d/80-iank-mail.conf <<'EOF'
# see exim spec
# * Update mail cert
-if [[ -e /p/c/filesystem ]]; then
- # note, man openvpn implies we could just call mail-route on vpn startup/shutdown with
- # systemd, buuut it can remake the tun device unexpectedly, i got this in the log
- # after my internet was down for a bit:
- # NOTE: Pulled options changed on restart, will need to close and reopen TUN/TAP device.
- m /a/exe/vpn-mk-client-cert -b mailclient -n mail li.iankelling.org
-fi
+
+
+## needed only for openvpn mail vpn.
+# if [[ -e /p/c/filesystem ]]; then
+# # note, man openvpn implies we could just call mail-route on vpn startup/shutdown with
+# # systemd, buuut it can remake the tun device unexpectedly, i got this in the log
+# # after my internet was down for a bit:
+# # NOTE: Pulled options changed on restart, will need to close and reopen TUN/TAP device.
+# m /a/exe/vpn-mk-client-cert -b mailclient -n mail li.iankelling.org
+# fi
# With openvpn, I didn't get around to persisting the openvpn
# cert/configs into /p/c/machine_specific/bk, so I had this case to
MAIN_TRUSTED_GROUPS = $u
EOF
+cd /etc/exim4
+{
+ for f in *-private.pem; do
+ echo ${f%-private.pem}
+ done
+} | i /etc/exim4/conf.d/my-dkim-domains
+
+if grep -Fq REMOTE_SMTP_SMARTHOST_TLS_VERIFY_HOSTS \
+ /etc/exim4/conf.d/transport/10_exim4-config_transport-macros; then
+ cat >/etc/exim4/conf.d/transport/11_iank <<'EOF'
+# This unsets the default macro defined in on t11 in
+# /etc/exim4/conf.d/transport/10_exim4-config_transport-macros
+# It seems like a very odd choice that this has become
+# the default in t11. Normal smarthost clients use username/password
+# auth. Oh well.
+REMOTE_SMTP_SMARTHOST_TLS_VERIFY_HOSTS ==
+EOF
+else
+ rm -f /etc/exim4/conf.d/transport/11_iank
+fi
+
cat >/etc/exim4/conf.d/main/000_local <<'EOF'
MAIN_TLS_ENABLE = true
DKIM_CANON = relaxed
DKIM_SELECTOR = li
-# from comments in
-# https://debian-administration.org/article/718/DKIM-signing_outgoing_mail_with_exim4
-# and its best for this to align https://tools.ietf.org/html/rfc7489#page-8
-# There could be some circumstance when the
-# from: isnt our domain, but the envelope sender is
-# and so still want to sign, but I cant think of any case.
-DKIM_DOMAIN = ${lc:${domain:$rh_from:}}
+
# The file is based on the outgoing domain-name in the from-header.
# sign if key exists
DKIM_PRIVATE_KEY = ${if exists{/etc/exim4/${dkim_domain}-private.pem} {/etc/exim4/${dkim_domain}-private.pem}}
LOCAL_DENY_EXCEPTIONS_LOCAL_ACL_FILE = /etc/exim4/conf.d/local_deny_exceptions_acl
EOF
+if dpkg --compare-versions "$(dpkg-query -f='${Version}\n' --show exim4)" ge 4.94; then
+ cat >>/etc/exim4/conf.d/main/000_local <<'EOF'
+# In t11, we cant do the old anymore because this is tainted data used in a file lookup.
+# /usr/share/doc/exim4/NEWS.Debian.gz suggests to use lookups to untaint data.
+DKIM_DOMAIN = ${lookup {${domain:$rh_from:}}lsearch,ret=key{/etc/exim4/conf.d/my-dkim-domains}}
+EOF
+else
+ cat >>/etc/exim4/conf.d/main/000_local <<'EOF'
+# From comments in
+# https://debian-administration.org/article/718/DKIM-signing_outgoing_mail_with_exim4
+# and its best for this to align https://tools.ietf.org/html/rfc7489#page-8
+# There could be some circumstance when the
+# from: isnt our domain, but the envelope sender is
+# and so still want to sign, but I cant think of any case.
+DKIM_DOMAIN = ${lc:${domain:$rh_from:}}
+EOF
+fi
+
rm -fv /etc/exim4/rcpt_local_acl # old path
i /etc/exim4/conf.d/local_deny_exceptions_acl <<'EOF'
EOF
+# It is important for this to exist universally, instead of
+# just on the mail host because if we change mail host and
+# still have something in the queue which was destined for
+# this router, but hosts were unreachable, the routers will
+# be reevaluated on the next retry.
+i /etc/exim4/conf.d/router/890_backup_copy <<EOF
+### router/900_exim4-config_local_user
+#################################
+
+# todo, it would be nice backup sent email too,
+# but its not so important, they still exist in my head
+
+backup_copy:
+driver = manualroute
+domains = eximbackup.b8.nz
+transport = backup_remote
+ignore_target_hosts = ${HOSTNAME}wg.b8.nz
+# note changes here also require change in passwd.client
+route_list = * eximbackup.b8.nz
+same_domain_copy_routing = yes
+errors_to = alerts@iankelling.org
+no_more
+EOF
+
+# exim4-config transports are the same as default except for
+# message_linelength_limit = 2097152
+#
+# TODO: copy the defaults into their own file, and setup a cronjob so
+# that if file.dpkg-dist shows up, and it is different, we get an alert.
+
+i /etc/exim4/conf.d/transport/30_exim4-config_remote_smtp_smarthost <<'EOF'
+### transport/30_exim4-config_remote_smtp_smarthost
+#################################
+
+# This transport is used for delivering messages over SMTP connections
+# to a smarthost. The local host tries to authenticate.
+# This transport is used for smarthost and satellite configurations.
+
+remote_smtp_smarthost:
+ debug_print = "T: remote_smtp_smarthost for $local_part@$domain"
+ driver = smtp
+ message_linelength_limit = 2097152
+ multi_domain
+ hosts_try_auth = <; ${if exists{CONFDIR/passwd.client} \
+ {\
+ ${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$host_address}}\
+ }\
+ {} \
+ }
+.ifdef REMOTE_SMTP_SMARTHOST_HOSTS_AVOID_TLS
+ hosts_avoid_tls = REMOTE_SMTP_SMARTHOST_HOSTS_AVOID_TLS
+.endif
+.ifdef REMOTE_SMTP_SMARTHOST_HOSTS_REQUIRE_TLS
+ hosts_require_tls = REMOTE_SMTP_SMARTHOST_HOSTS_REQUIRE_TLS
+.endif
+.ifdef REMOTE_SMTP_SMARTHOST_TLS_VERIFY_CERTIFICATES
+ tls_verify_certificates = REMOTE_SMTP_SMARTHOST_TLS_VERIFY_CERTIFICATES
+.endif
+.ifdef REMOTE_SMTP_SMARTHOST_TLS_VERIFY_HOSTS
+ tls_verify_hosts = REMOTE_SMTP_SMARTHOST_TLS_VERIFY_HOSTS
+.endif
+.ifdef REMOTE_SMTP_HEADERS_REWRITE
+ headers_rewrite = REMOTE_SMTP_HEADERS_REWRITE
+.endif
+.ifdef REMOTE_SMTP_RETURN_PATH
+ return_path = REMOTE_SMTP_RETURN_PATH
+.endif
+.ifdef REMOTE_SMTP_HELO_DATA
+ helo_data=REMOTE_SMTP_HELO_DATA
+.endif
+.ifdef TLS_DH_MIN_BITS
+tls_dh_min_bits = TLS_DH_MIN_BITS
+.endif
+.ifdef REMOTE_SMTP_SMARTHOST_TLS_CERTIFICATE
+tls_certificate = REMOTE_SMTP_SMARTHOST_TLS_CERTIFICATE
+.endif
+.ifdef REMOTE_SMTP_SMARTHOST_PRIVATEKEY
+tls_privatekey = REMOTE_SMTP_SMARTHOST_PRIVATEKEY
+.endif
+.ifdef REMOTE_SMTP_TRANSPORTS_HEADERS_REMOVE
+ headers_remove = REMOTE_SMTP_TRANSPORTS_HEADERS_REMOVE
+.endif
+.ifdef REMOTE_SMTP_SMARTHOST_PROTOCOL
+ protocol = REMOTE_SMTP_SMARTHOST_PROTOCOL
+.endif
+EOF
+
+i /etc/exim4/conf.d/transport/30_exim4-config_remote_smtp <<'EOF'
+### transport/30_exim4-config_remote_smtp
+#################################
+# This transport is used for delivering messages over SMTP connections.
+
+remote_smtp:
+ debug_print = "T: remote_smtp for $local_part@$domain"
+ driver = smtp
+ message_linelength_limit = 2097152
+.ifdef REMOTE_SMTP_HOSTS_AVOID_TLS
+ hosts_avoid_tls = REMOTE_SMTP_HOSTS_AVOID_TLS
+.endif
+.ifdef REMOTE_SMTP_HEADERS_REWRITE
+ headers_rewrite = REMOTE_SMTP_HEADERS_REWRITE
+.endif
+.ifdef REMOTE_SMTP_RETURN_PATH
+ return_path = REMOTE_SMTP_RETURN_PATH
+.endif
+.ifdef REMOTE_SMTP_HELO_DATA
+ helo_data=REMOTE_SMTP_HELO_DATA
+.endif
+.ifdef REMOTE_SMTP_INTERFACE
+ interface = REMOTE_SMTP_INTERFACE
+.endif
+.ifdef DKIM_DOMAIN
+dkim_domain = DKIM_DOMAIN
+.endif
+.ifdef DKIM_IDENTITY
+dkim_identity = DKIM_IDENTITY
+.endif
+.ifdef DKIM_SELECTOR
+dkim_selector = DKIM_SELECTOR
+.endif
+.ifdef DKIM_PRIVATE_KEY
+dkim_private_key = DKIM_PRIVATE_KEY
+.endif
+.ifdef DKIM_CANON
+dkim_canon = DKIM_CANON
+.endif
+.ifdef DKIM_STRICT
+dkim_strict = DKIM_STRICT
+.endif
+.ifdef DKIM_SIGN_HEADERS
+dkim_sign_headers = DKIM_SIGN_HEADERS
+.endif
+.ifdef DKIM_TIMESTAMPS
+dkim_timestamps = DKIM_TIMESTAMPS
+.endif
+.ifdef TLS_DH_MIN_BITS
+tls_dh_min_bits = TLS_DH_MIN_BITS
+.endif
+.ifdef REMOTE_SMTP_TLS_CERTIFICATE
+tls_certificate = REMOTE_SMTP_TLS_CERTIFICATE
+.endif
+.ifdef REMOTE_SMTP_PRIVATEKEY
+tls_privatekey = REMOTE_SMTP_PRIVATEKEY
+.endif
+.ifdef REMOTE_SMTP_HOSTS_REQUIRE_TLS
+ hosts_require_tls = REMOTE_SMTP_HOSTS_REQUIRE_TLS
+.endif
+.ifdef REMOTE_SMTP_TRANSPORTS_HEADERS_REMOVE
+ headers_remove = REMOTE_SMTP_TRANSPORTS_HEADERS_REMOVE
+.endif
+
+EOF
+
+i /etc/exim4/conf.d/transport/30_backup_remote <<'EOF'
+backup_remote:
+ driver = smtp
+ multi_domain
+ message_linelength_limit = 2097152
+ hosts_require_auth = *
+ hosts_try_auth = *
+ envelope_to_add
+ # manual return path because we want it to be the envelope sender
+ # we got not the one we are using in this smtp transport
+ headers_add = "Return-path: $sender_address"
+.ifdef REMOTE_SMTP_SMARTHOST_HOSTS_AVOID_TLS
+ hosts_avoid_tls = REMOTE_SMTP_SMARTHOST_HOSTS_AVOID_TLS
+.endif
+.ifdef REMOTE_SMTP_SMARTHOST_HOSTS_REQUIRE_TLS
+ hosts_require_tls = REMOTE_SMTP_SMARTHOST_HOSTS_REQUIRE_TLS
+.endif
+.ifdef REMOTE_SMTP_SMARTHOST_TLS_VERIFY_CERTIFICATES
+ tls_verify_certificates = REMOTE_SMTP_SMARTHOST_TLS_VERIFY_CERTIFICATES
+.endif
+.ifdef REMOTE_SMTP_SMARTHOST_TLS_VERIFY_HOSTS
+ tls_verify_hosts = REMOTE_SMTP_SMARTHOST_TLS_VERIFY_HOST
+.endif
+.ifdef REMOTE_SMTP_HEADERS_REWRITE
+ headers_rewrite = REMOTE_SMTP_HEADERS_REWRITE
+.endif
+.ifdef REMOTE_SMTP_HELO_DATA
+ helo_data=REMOTE_SMTP_HELO_DATA
+.endif
+.ifdef TLS_DH_MIN_BITS
+tls_dh_min_bits = TLS_DH_MIN_BITS
+.endif
+.ifdef REMOTE_SMTP_SMARTHOST_TLS_CERTIFICATE
+tls_certificate = REMOTE_SMTP_SMARTHOST_TLS_CERTIFICATE
+.endif
+.ifdef REMOTE_SMTP_SMARTHOST_PRIVATEKEY
+tls_privatekey = REMOTE_SMTP_SMARTHOST_PRIVATEKEY
+.endif
+.ifdef REMOTE_SMTP_TRANSPORTS_HEADERS_REMOVE
+ headers_remove = REMOTE_SMTP_TRANSPORTS_HEADERS_REMOVE
+.endif
+EOF
+
i /etc/exim4/conf.d/router/900_exim4-config_local_user <<'EOF'
### router/900_exim4-config_local_user
#################################
remote_smtp_vpn:
debug_print = "T: remote_smtp_vpn for $local_part@$domain"
driver = smtp
-.ifndef IGNORE_SMTP_LINE_LENGTH_LIMIT
- message_size_limit = ${if > {$max_received_linelength}{998} {1}{0}}
-.endif
+ message_linelength_limit = 2097152
.ifdef REMOTE_SMTP_HOSTS_AVOID_TLS
hosts_avoid_tls = REMOTE_SMTP_HOSTS_AVOID_TLS
.endif
smarthost_dkim:
debug_print = "T: remote_smtp_smarthost for $local_part@$domain"
driver = smtp
+ message_linelength_limit = 2097152
multi_domain
-.ifndef IGNORE_SMTP_LINE_LENGTH_LIMIT
- message_size_limit = ${if > {$max_received_linelength}{998} {1}{0}}
-.endif
hosts_try_auth = <; ${if exists{CONFDIR/passwd.client} \
{\
${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$host_address}}\
rcdir=${rcdirs[i]}
rcbase=${rcdir##*/}
ncdir=${ncdirs[i]}
+ myncdir=/root/${ncdir##*/}
+ mkdir -p $myncdir
# copied from debians cronjob
i /etc/cron.d/$rcbase <<EOF
### begin php setup for rc ###
# Enable PHP modules.
m phpenmod -v php mcrypt imap
- # dpkg says this is required
+ # dpkg says this is required.
+ # nextcloud needs these too
m a2enmod proxy_fcgi setenvif
fpm=$(dpkg-query -s php-fpm | sed -nr 's/^Depends:.* (php[^ ]*-fpm)( .*|$)/\1/p') # eg: php7.4-fpm
phpver=$(dpkg-query -s php-fpm | sed -nr 's/^Depends:.* php([^ ]*)-fpm( .*|$)/\1/p')
m rm -f $file
m chown -R www-data.www-data nextcloud
m mv nextcloud $ncdir
+ fi
+
+ if [[ ! -e $myncdir/done-install ]]; then
m cd $ncdir
m sudo -u www-data php occ maintenance:install --database sqlite --admin-user iank --admin-pass $nextcloud_admin_pass
+ m touch $myncdir/done-install
fi
+
# note, strange this happend where updater did not increment the version var,
# mine was stuck on 20. I manually updated it.
m cd $ncdir/config
- if [[ ! -e config.php-orig ]]; then
- m cp -a config.php config.php-orig
+ if [[ ! -e $myncdir/config.php-orig ]]; then
+ m cp -a config.php $myncdir/config.php-orig
fi
- cat config.php-orig - >tmp.php <<EOF
+ cat $myncdir/config.php-orig - >$myncdir/tmp.php <<EOF
# https://docs.nextcloud.com/server/19/admin_manual/configuration_server/email_configuration.html
\$CONFIG["mail_smtpmode"] = "sendmail";
\$CONFIG["mail_smtphost"] = "127.0.0.1";
var_export(\$CONFIG);
fwrite(STDOUT, ";\n");
EOF
- e running php tmp.php
- php tmp.php >config.php
- # leave in place for debugging
- #m rm -f tmp.php
- m sudo -u www-data php $ncdir/occ maintenance:update:htaccess
+ e running php $myncdir/tmp.php
+ # note: we leave it around place for debugging
+ php $myncdir/tmp.php >config.php
+ cd $ncdir
+ m sudo -u www-data php occ maintenance:update:htaccess
list=$(sudo -u www-data php $ncdir/occ --output=json_pretty app:list)
# user_external not compaible with nc 23
for app in contacts calendar; do
if [[ $(printf "%s\n" "$list"| jq ".enabled.$app") == null ]]; then
- m sudo -u www-data php $ncdir/occ app:install $app
+ cd $ncdir
+ m sudo -u www-data php occ app:install $app
fi
done
i /etc/systemd/system/$ncbase.service <<EOF
ncbase=$1
cd /var/www/$ncbase
+# https://docs.nextcloud.com/server/22/admin_manual/maintenance/update.html?highlight=updater+phar
m php /var/www/$ncbase/updater/updater.phar -n
-# just being overly cautious
-sleep 3
-m php occ -n upgrade
EOFOUTER
chmod +x /usr/local/bin/ncup
# i use epanic-clean for alerting if there are bad paniclog entries
E4BCD_WATCH_PANICLOG='no'
EOF
+ # make exim be a nonroot setuid program.
chown Debian-exim:Debian-exim /usr/sbin/exim4
# needs guid set in order to become Debian-exim
chmod g+s,u+s /usr/sbin/exim4
+ # need this to avoid error on service reload:
+ # 2022-08-07 18:44:34.005 [892491] pid 892491: SIGHUP received: re-exec daemon
+ # 2022-08-07 18:44:34.036 [892491] cwd=/var/spool/exim4 5 args: /usr/sbin/exim4 -bd -q30m -C /etc/exim4/my.conf
+ # 2022-08-07 18:44:34.043 [892491] socket bind() to port 25 for address (any IPv6) failed: Permission denied: waiting 30s before trying again (9 more tries)
+ # note: the daemon gives up and dies after retrying those 9 times.
+ # I came upon this by guessing and trial and error.
+ setcap CAP_NET_BIND_SERVICE+ei /usr/sbin/exim4
i /etc/exim4/trusted_configs <<'EOF'
/etc/exim4/my.conf
EOF
# this whole setting doesnt work. tried it with a newer systemd 250 though
# an nspawn, and it worked there.
InaccessiblePaths=${dirs[@]}
-NoNewPrivileges=yes
+# this gives us the permission denied error:
+# socket bind() to port 25 for address (any IPv6) failed: Permission denied
+# but we also have to set the file capabilities to avoid the error.
+#NoNewPrivileges=yes
ProtectSystem=yes
# when we get newer systemd
# which required using a dedicated user, but realized smtp will be
# more reliable and less fuss. If I ever need that again, see the
# history of this file, and bum in brc2.
-
i /etc/exim4/conf.d/router/890_backup_copy <<EOF
-### router/900_exim4-config_local_user
-#################################
-
-# todo, it would be nice to save sent email too,
-# but its not so important, they still exist in my head
-
backup_redir:
driver = redirect
domains = +local_domains
# redirected earlier, so that is just being overly cautious.
local_parts = ! root : ! testignore : ! alerts
unseen = true
-
-backup_copy:
-driver = manualroute
-domains = eximbackup.b8.nz
-transport = backup_remote
-ignore_target_hosts = ${HOSTNAME}wg.b8.nz
-# note changes here also require change in passwd.client
-route_list = * eximbackup.b8.nz
-same_domain_copy_routing = yes
errors_to = alerts@iankelling.org
-no_more
EOF
- i /etc/exim4/conf.d/transport/30_backup_remote <<'EOF'
-backup_remote:
- driver = smtp
- multi_domain
-.ifndef IGNORE_SMTP_LINE_LENGTH_LIMIT
- message_size_limit = ${if > {$max_received_linelength}{998} {1}{0}}
-.endif
- hosts_require_auth = *
- hosts_try_auth = *
- envelope_to_add
- # manual return path because we want it to be the envelope sender
- # we got not the one we are using in this smtp transport
- headers_add = "Return-path: $sender_address"
-.ifdef REMOTE_SMTP_SMARTHOST_HOSTS_AVOID_TLS
- hosts_avoid_tls = REMOTE_SMTP_SMARTHOST_HOSTS_AVOID_TLS
-.endif
-.ifdef REMOTE_SMTP_SMARTHOST_HOSTS_REQUIRE_TLS
- hosts_require_tls = REMOTE_SMTP_SMARTHOST_HOSTS_REQUIRE_TLS
-.endif
-.ifdef REMOTE_SMTP_SMARTHOST_TLS_VERIFY_CERTIFICATES
- tls_verify_certificates = REMOTE_SMTP_SMARTHOST_TLS_VERIFY_CERTIFICATES
-.endif
-.ifdef REMOTE_SMTP_SMARTHOST_TLS_VERIFY_HOSTS
- tls_verify_hosts = REMOTE_SMTP_SMARTHOST_TLS_VERIFY_HOST
-.endif
-.ifdef REMOTE_SMTP_HEADERS_REWRITE
- headers_rewrite = REMOTE_SMTP_HEADERS_REWRITE
-.endif
-.ifdef REMOTE_SMTP_HELO_DATA
- helo_data=REMOTE_SMTP_HELO_DATA
-.endif
-.ifdef TLS_DH_MIN_BITS
-tls_dh_min_bits = TLS_DH_MIN_BITS
-.endif
-.ifdef REMOTE_SMTP_SMARTHOST_TLS_CERTIFICATE
-tls_certificate = REMOTE_SMTP_SMARTHOST_TLS_CERTIFICATE
-.endif
-.ifdef REMOTE_SMTP_SMARTHOST_PRIVATEKEY
-tls_privatekey = REMOTE_SMTP_SMARTHOST_PRIVATEKEY
-.endif
-.ifdef REMOTE_SMTP_TRANSPORTS_HEADERS_REMOVE
- headers_remove = REMOTE_SMTP_TRANSPORTS_HEADERS_REMOVE
-.endif
-EOF
-
- # this avoids some error. i cant remember what. todo:
- # test it out and document why/if its needed.
- # i /etc/exim4/host_local_deny_exceptions <<'EOF'
- # mail.fsf.org
- # *.posteo.de
- # EOF
+ # This allows for forwarded mail to not get most rcpt checks, especially SPF,
+ # which would incorrectly get denied.
+ i /etc/exim4/host_local_deny_exceptions <<'EOF'
+mail.fsf.org
+*.posteo.de
+EOF
# cron email from smarthost hosts will automatically be to
# USER@FQDN. I redirect that to alerts@, on the smarthosts, but in
echo | /a/exe/cedit nn /etc/hosts || [[ $? == 1 ]]
echo | /a/exe/cedit mail /etc/dnsmasq-servers.conf || [[ $? == 1 ]]
-
+ # note: condition duplicated at else
if $bhost_t; then
install -d /bu
install -d -g Debian-exim -o Debian-exim -m 771 /bu/md
RestartSec=20
EOF
- else
+ else # if $bhost_t; then
cat >>/etc/exim4/update-exim4.conf.conf <<EOF
# Note: If theres like a temporary problem where mail gets sent to
# one of these hosts, if exim isnt listening, it will be a temporary error
case $HOSTNAME in
$MAIL_HOST|bk)
# config for the non-nn exim
- m rsync -ra --delete /etc/exim4/ /etc/myexim4
- cat >>/etc/myexim4/conf.d/main/000_local-nn <<'EOF'
+ m rsync -ra --delete --delete-excluded --exclude=/conf.d/main/000_local-nn /etc/exim4/ /etc/myexim4
+ cat >>/etc/myexim4/conf.d/main/000_local <<'EOF'
# this makes it easier to see which exim is doing what
log_file_path = /var/log/exim4/my%s
EOF
+
+
cat >/etc/logrotate.d/myexim <<'EOF'
/var/log/exim4/mymain /var/log/exim4/myreject {
daily
m systemctl daemon-reload
fi
+# checking bhost_t is redundant, but could help us catch errors.
+if $bhost_t || [[ -e /etc/wireguard/wghole.conf ]]; then
+ # todo: in mail-setup, we have a static list of backup hosts, not *y
+ m systemctl --now enable wg-quick@wghole
+fi
+
sysd-prom-fail-install epanicclean
m systemctl --now enable epanicclean
iankelling.org / git / distro-setup / blobdiff