fixup mail route going down, and switch mail with no internet
[distro-setup] / mail-setup
index d6ba6f7f7b07ef24b90d6e2a16cfdb0b61c6c37d..a0bba6db2b78082d78f54ceffc983b53f482e0b2 100755 (executable)
@@ -27,6 +27,15 @@ Setup exim4 / postfix / dovecot
 
 The minimal assumption we have is that /etc/mailpass exists
 
+
+I've had problems with postfix on debian:
+on stretch, a startup ordering issue caused all mail to fail.
+postfix changed defaults to only use ipv6 dns, causing all my mail to fail.
+I haven't gotten around to getting a non-debian exim
+setup.
+
+
+
 -h|--help  Print help and exit.
 EOF
     exit $1
@@ -117,6 +126,7 @@ u=$SUDO_USER
 # echo "dmarc dns, name: _dmarc value: v=DMARC1; p=none; rua=mailto:mailauth-reports@$domain"
 
 # # 2017-02 spf policies:
+# # host -t txt lists.fedoraproject.org
 # # google ~all, hotmail -all, yahoo: ?all, fastmail ?all
 # # i include fastmail\'s settings, per their instructions,
 # # and follow their policy. In mail in a box, or similar instructions,
@@ -280,36 +290,26 @@ else # begin exim. has debian specific stuff for now
     fi
 
     if [[ -e /p/c/filesystem ]]; then
+        # allow failure of these commands when our internet is down, they are likely not needed,
+        # we check that a valid cert is there already.
         # to put the hostname in the known hosts
-        ssh -o StrictHostKeyChecking=no root@li.iankelling.org :
-        /a/exe/vpn-mk-client-cert -b mail -n mail li.iankelling.org
+        if ! ssh -o StrictHostKeyChecking=no root@li.iankelling.org :; then
+            openssl x509 -checkend $(( 60 * 60 * 24 * 3 )) -noout -in /etc/openvpn/mail.crt
+        else
+            # note, man openvpn implies we could just call mail-route on vpn startup/shutdown with
+            # systemd, buuut it can remake the tun device unexpectedly, i got this in the log
+            # after my internet was down for a bit:
+            # NOTE: Pulled options changed on restart, will need to close and reopen TUN/TAP device.
+            /a/exe/vpn-mk-client-cert -b mail -n mail -s /b/ds/mail-route li.iankelling.org
+        fi
     fi
 
-    cat >/etc/systemd/system/mailroute.service <<EOF
-[Unit]
-# this unit is configured to start and stop whenever $vpn_ser@mail.service
-# does
-Description=Routing for email vpn
-After=network.target
-BindsTo=$vpn_ser@mail.service
-After=$vpn_ser@mail.service
-
-[Service]
-Type=oneshot
-ExecStart=/a/bin/distro-setup/mail-route start
-ExecStop=/a/bin/distro-setup/mail-route stop
-RemainAfterExit=yes
-
-[Install]
-RequiredBy=$vpn_ser@mail.service
-EOF
-
     cat >/etc/systemd/system/offlineimapsync.timer <<'EOF'
 [Unit]
-Description=Run offlineimap-sync once every 5 mins
+Description=Run offlineimap-sync once every min
 
 [Timer]
-OnCalendar=*:0/5
+OnCalendar=*:0/1
 
 [Install]
 WantedBy=timers.target
@@ -326,7 +326,6 @@ Type=oneshot
 ExecStart=/a/bin/log-quiet/sysd-mail-once offlineimap-sync /a/bin/distro-setup/offlineimap-sync
 EOF
     systemctl daemon-reload
-    systemctl enable mailroute
 
     # wording of question from dpkg-reconfigure exim4-config
     # 1. internet site; mail is sent and received directly using SMTP
@@ -345,6 +344,12 @@ EOF
 
     # most of these settings get translated into settings
     # in /etc/exim4/update-exim4.conf.conf
+    # how /etc/exim4/update-exim4.conf.conf translates into actual exim settings is
+    # documented in man update-exim4.conf, which outputs to the config that
+    # exim actually reads. except the man page is not perfect, for example,
+    # it doesn't document that it sets
+    # DCconfig_${dc_eximconfig_configtype}" "1"
+    # which is a line from update-exim4.conf, which is a relatively short bash script.
     # mailname setting sets /etc/mailname
 
     debconf-set-selections <<EOF
@@ -373,8 +378,21 @@ if [[ $HOSTNAME == $MAIL_HOST ]]; then
     local_mx=mail.iankelling.org
     rsync_common="rsync -ogtL --chown=root:Debian-exim --chmod=640 root@li:/etc/letsencrypt/live/$local_mx/"
     ${rsync_common}fullchain.pem /etc/exim4/exim.crt
+    ret=$?
     ${rsync_common}privkey.pem /etc/exim4/exim.key
+    new_ret=$?
+    if [[ $ret != $new_ret ]]; then
+       echo "$0: error: differing rsync returns, $ret, $new_ret"
+       exit 1
+    fi
 fi
+if [[ $new_ret != 0 ]]; then
+    if ! openssl x509 -checkend $(( 60 * 60 * 24 * 3 )) -noout -in /etc/exim4/exim.crt; then
+        echo "$0: error!: cert rsync failed and it will expire in less than 3 days"
+        exit 1
+    fi
+fi
+exit 0
 EOF
     chmod 755 $f
 
@@ -844,6 +862,28 @@ dovecot_lmtp:
         batch_max = 200
 EOF
 
+    cat >/etc/exim4/conf.d/router/190_exim4-config_fsfsmarthost <<'EOF'
+# smarthost for fsf mail
+# ian: copied from /etc/exim4/conf.d/router/200_exim4-config_primary, and added senders = and
+# replaced DCsmarthost with mail.fsf.org
+fsfsmarthost:
+  debug_print = "R: smarthost for $local_part@$domain"
+  driver = manualroute
+  domains = ! +local_domains
+  senders = *@fsf.org
+  transport = remote_smtp_smarthost
+  route_list = * mail.fsf.org byname
+  host_find_failed = ignore
+  same_domain_copy_routing = yes
+  no_more
+EOF
+
+    # https://blog.dhampir.no/content/make-exim4-on-debian-respect-forward-and-etcaliases-when-using-a-smarthost
+    # i only need .forwards, so just doing that one.
+    cd /etc/exim4/conf.d/router
+    b=userforward_higher_priority
+    # replace the router name so it is unique
+    sed -r s/^\\S+:/$b:/ 600_exim4-config_userforward >175_$b
 
     # begin setup passwd.client
     f=/etc/exim4/passwd.client
@@ -855,71 +895,68 @@ EOF
     done
     # end setup passwd.client
 
-    # https://blog.dhampir.no/content/make-exim4-on-debian-respect-forward-and-etcaliases-when-using-a-smarthost
-    # i only need .forwards, so just doing that one.
-    cd /etc/exim4/conf.d/router
-    b=userforward_higher_priority
-    # replace the router name so it is unique
-    sed -r s/^\\S+:/$b:/ 600_exim4-config_userforward >175_$b
+    # by default, only 10 days of logs are kept. increase that.
+    sed -ri 's/^(\s*rotate\s).*/\11000/' /etc/logrotate.d/exim4-base
+
     systemctl restart exim4
 
-fi  #### end if exim4
+        fi  #### end if exim4
 
-# /etc/alias setup is debian specific, and
-# exim config sets up an /etc/alias from root to the postmaster, which i
-# config to ian, as long as there exists an entry for root, or there was
-# no preexisting aliases file. based on the postinst file. postfix
-# won\'t set up a root to $postmaster alias if it\'s already installed.
-# Since postfix is not the greatest, just set it ourselves.
-if [[ $postmaster != root ]]; then
-    sed -i --follow-symlinks -f - /etc/aliases <<EOF
+         # /etc/alias setup is debian specific, and
+         # exim config sets up an /etc/alias from root to the postmaster, which i
+         # config to ian, as long as there exists an entry for root, or there was
+         # no preexisting aliases file. based on the postinst file. postfix
+         # won\'t set up a root to $postmaster alias if it\'s already installed.
+         # Since postfix is not the greatest, just set it ourselves.
+         if [[ $postmaster != root ]]; then
+             sed -i --follow-symlinks -f - /etc/aliases <<EOF
 \$a root: $postmaster
 /^root:/d
 EOF
-    newaliases
-fi
-
-# put spool dir in directory that spans multiple distros.
-# based on http://www.postfix.org/qmgr.8.html and my notes in gnus
-#
-# todo: I\'m suspicious of uids for Debian-exim being the same across
-# distros. It would be good to test this.
-dir=/nocow/$type
-sdir=/var/spool/$type
-# we only do this if our system has $dir
-if [[ -e /nocow && $(readlink -f $sdir) != $dir ]]; then
-    systemctl stop $type
-    if [[ ! -e $dir && -d $sdir ]]; then
-        mv $sdir $dir
-    fi
-    /a/exe/lnf -T $dir $sdir
-fi
-
-systemctl restart $type
-systemctl enable $type
-
-# MAIL_HOST also does radicale, and easier to start and stop it here
-# for when MAIL_HOST changes, so radicale gets the synced files and
-# does not stop us from remounting /o.
-if dpkg -s radicale &>/dev/null; then
-    if [[ $HOSTNAME == $MAIL_HOST ]]; then
-        systemctl restart radicale
-        systemctl enable radicale
-        if [[ -e /etc/logrotate.d/radicale.disabled ]]; then
-            mv /etc/logrotate.d/radicale{.disabled,}
-        fi
-    else
-        systemctl stop radicale
-        systemctl disable radicale
+             newaliases
+         fi
+
+         # put spool dir in directory that spans multiple distros.
+         # based on http://www.postfix.org/qmgr.8.html and my notes in gnus
+         #
+         # todo: I\'m suspicious of uids for Debian-exim being the same across
+         # distros. It would be good to test this.
+         dir=/nocow/$type
+         sdir=/var/spool/$type
+         # we only do this if our system has $dir
+         if [[ -e /nocow && $(readlink -f $sdir) != $dir ]]; then
+             systemctl stop $type
+             if [[ ! -e $dir && -d $sdir ]]; then
+                 mv $sdir $dir
+             fi
+             /a/exe/lnf -T $dir $sdir
+         fi
+
+         systemctl restart $type
+         systemctl enable $type
+
+         # MAIL_HOST also does radicale, and easier to start and stop it here
+         # for when MAIL_HOST changes, so radicale gets the synced files and
+         # does not stop us from remounting /o.
+         if dpkg -s radicale &>/dev/null; then
+             if [[ $HOSTNAME == $MAIL_HOST ]]; then
+                 systemctl restart radicale
+                 systemctl enable radicale
+                 if [[ -e /etc/logrotate.d/radicale.disabled ]]; then
+                     mv /etc/logrotate.d/radicale{.disabled,}
+                 fi
+             else
+                 systemctl stop radicale
+                 systemctl disable radicale
         # weekly logrotate tries to restart radicale even if it's a disabled service in flidas.
         if [[ -e /etc/logrotate.d/radicale ]]; then
             mv /etc/logrotate.d/radicale{,.disabled}
         fi
-    fi
-fi
-exit 0
+        fi
+        fi
+         exit 0
 
-# if I wanted the from address to be renamed and sent to a different address,
-# echo "sdx@localhost development@localhost" | sudo dd of=/etc/postfix/recipient_canonical
-# sudo postmap hash:/etc/postfix/recipient_canonical
-# sudo service postfix reload
+         # if I wanted the from address to be renamed and sent to a different address,
+         # echo "sdx@localhost development@localhost" | sudo dd of=/etc/postfix/recipient_canonical
+         # sudo postmap hash:/etc/postfix/recipient_canonical
+         # sudo service postfix reload