########### begin section including vps ################
pi ${p2[@]}
-
conflink
sudo rm -fv
# for ziva
#p install --no-install-recommends minetest/buster libleveldb1d/buster libncursesw6/buster libtinfo6/buster
doupdate=false
+ # shellcheck disable=SC2043 # in case we want more than 1 in the loop later.
for n in bullseye; do
f=/etc/apt/sources.list.d/$n.list
t=$(mktemp)
deb http://us.archive.ubuntu.com/ubuntu/ focal-security main universe
EOF
if ! diff -q $t $f; then
- sudo dd if=$t of=$f 2>/dev/null
+ sudo dd if=$t of=$f status=none
p update
fi
deb-src http://mirror.fsf.org/trisquel/ nabia-backports main
EOF
if ! diff -q $t $f; then
- sudo dd if=$t of=$f 2>/dev/null
+ sudo dd if=$t of=$f status=none
p update
fi
deb-src http://mirror.fsf.org/trisquel/ aramo-backports main
EOF
if ! diff -q $t $f; then
- sudo dd if=$t of=$f 2>/dev/null
+ sudo dd if=$t of=$f status=none
p update
fi
##### begin automatic upgrades (after checkrestart has been installed) ####
# if apt-config-auto-update is installed,
# it also has similar config, in a file 10something,
-# but i think his overrides it since its higher number.
+# but i think this overrides it since its higher number.
# This file was part of the automatic-updates package,
-# and it has a configu option to not get new package lists,
+# and it has a config option to not get new package lists,
# which seems pretty stupid to me, you cant actually upgrade
# anything if you dont have the new package list.
sd /etc/apt/apt.conf.d/20auto-upgrades <<'EOF'
+# note: man apt.conf says
+# /usr/share/doc/apt/examples/configure-index.gz is a configuration file showing
+# example values for all possible options.
+# but that is a incorrect.
+# Periodic and other options are only documented in
+# /usr/lib/apt/apt.systemd.daily
+# That filename can be found through poking around in apt daily cronjob.
APT::Periodic::Update-Package-Lists "1";
APT::Periodic::Download-Upgradeable-Packages "1";
-APT::Periodic::AutocleanInterval "7";
+# 0 means disabled. I used to set this to 7, however, trisquel doesn't
+# have an archive of old package versions, so I want to
+# keep around old versions so I can easily downgrade.
+APT::Periodic::AutocleanInterval "0";
+# daily expire old files /var/cache/apt if it gets above this MB
+APT::Periodic::MaxSize "50000";
APT::Periodic::Unattended-Upgrade "1";
EOF
dnsb8
fi
- pi prometheus-node-exporter
- /a/bin/buildscripts/prom-node-exporter -l
+ s /c/roles/prom_export/files/simple/usr/local/bin/fsf-install-node-exporter -l 127.0.0.1
# ex for exporter
web-conf -p 9101 -f 9100 - apache2 ${HOSTNAME}ex.b8.nz <<'EOF'
;;
li)
+ p build-dep eggdrop
+ if [[ ! -L ~/eggdrop/eggdrop ]]; then
+ cd
+ git clone https://github.com/eggheads/eggdrop eggdrop-src
+ cd eggdrop-src
+ ./configure
+ make config
+ make
+ make install
+ fi
+
+ # dunno if this is really needed. it was part of the documented eggdrop systemd install script
+ sudo loginctl enable-linger
+ systemctl --user enable fsysbot
+ systemctl --user start fsysbot
+
m /a/h/setup.sh iankelling.org
# start mumble only when im going to use it, since i dont use it much
client-to-client
EOF
- # sullivan d8
- sd /etc/openvpn/client-config-hole/sd8 <<'EOF'
-ifconfig-push 10.5.5.41 255.255.255.0
-EOF
- # hsieh d8
- sd /etc/openvpn/client-config-hole/hd8 <<'EOF'
-ifconfig-push 10.5.5.42 255.255.255.0
-EOF
- sd /etc/openvpn/client-config-hole/onep9 <<'EOF'
-ifconfig-push 10.5.5.14 255.255.255.0
-EOF
- sd /etc/openvpn/client-config-hole/bo <<'EOF'
-ifconfig-push 10.5.5.13 255.255.255.0
-EOF
- sd /etc/openvpn/client-config-hole/sy <<'EOF'
-ifconfig-push 10.5.5.12 255.255.255.0
-EOF
- sd /etc/openvpn/client-config-hole/kw <<'EOF'
-ifconfig-push 10.5.5.9 255.255.255.0
-EOF
- sd /etc/openvpn/client-config-hole/x3 <<'EOF'
-ifconfig-push 10.5.5.8 255.255.255.0
-EOF
- sd /etc/openvpn/client-config-hole/x2 <<'EOF'
-ifconfig-push 10.5.5.7 255.255.255.0
-EOF
- sd /etc/openvpn/client-config-hole/wclient <<'EOF'
-ifconfig-push 10.5.5.6 255.255.255.0
-EOF
- sd /etc/openvpn/client-config-hole/frodo <<'EOF'
-ifconfig-push 10.5.5.5 255.255.255.0
-EOF
- sd /etc/openvpn/client-config-hole/amy <<'EOF'
-ifconfig-push 10.5.5.3 255.255.255.0
-EOF
- sd /etc/openvpn/client-config-hole/kd <<'EOF'
-ifconfig-push 10.5.5.2 255.255.255.0
+ ngset
+ files=(/etc/openvpn/client-config-hole/*)
+ if (( ${#files[@]} >= 1 )); then
+ rm -f ${files[@]}
+ fi
+ ngreset
+ for host in ${!vpn_ips[@]}; do
+ sd /etc/openvpn/client-config-hole/$host <<EOF
+ifconfig-push 10.5.5.${vpn_ips[$host]} 255.255.255.0
EOF
+ done
+
- # for adding to current system:
- #vpn-mk-client-cert -s "" -n hole 72.14.176.105
- # adding to remove system 107,
- #vpn-mk-client-cert -s "" -n hole -c 10.2.0.107 -b hd8 iankelling.org
+ # for adding cert to system with /p
#
- # for wireguard hole vpn
+ # host=frodo
+ #mkc /p/c/machine_specific/$host/filesystem/etc/openvpn/client
+ #vpn-mk-client-cert -b $host -n hole -r iankelling.org
+ #s chown -R iank:iank .
+ #
+ # example of adding to remote system 107,
+ # vpn-mk-client-cert -n hole -c 10.2.0.107 -b hd8 iankelling.org
+ #
+ # for wireguard hole vpn, use function:
# wghole
+ # eg:
+ # wghole bo 28
+ # if it is going to want to connect to transmission-daemon on ok
+ # wghole bo 28 10.174.2.2/32
# requested from linode via a support ticket.
# https://www.linode.com/docs/networking/an-overview-of-ipv6-on-linode/
end
;;
esac
+
+case $HOSTNAME in
+ bk)
+ pi icecast2
+ # todo, save the config
+ /etc/cron.daily/stream-cert
+ web-conf -c /etc/cert-live.fsf.org -p 443 -f 8000 apache2 live.fsf.org
+ ;;
+esac
+
###### end website setup
########### end section including li/lj ###############
# way to install suggests even if the main package is already
# installed. reinstall doesn't work, uninstalling can cause removing
# dependent packages.
+# shellcheck disable=SC2046 # word splitting is intended
pi ${pall[@]} $(apt-cache search ruby[.0-9]+-doc| awk '{print $1}') $($src/distro-pkgs)
+# schroot service will restart schroot sessions after reboot.
+# I dont want that.
+pi-nostart schroot
+
+# fix systemd unit failure. i dont know of any actual impact
+# other than systemd showing in degraded state. So, we dont bother
+# fixing the current state, let it fix on the next reboot.
+# https://gitlab.com/cjwatson/binfmt-support/-/commit/54f0e1af8a
+tmp=$(systemctl cat binfmt-support.service | grep ^After=)
+if [[ $tmp != *systemd-binfmt.service* ]]; then
+ s u /etc/systemd/system/binfmt-support.service.d/override.conf <<EOF
+[Unit]
+$tmp systemd-binfmt.service
+EOF
+fi
+
# commented, not worth the hassle i think.
#seru enable psd
# esac
-### begin home vpn server setup
-
-
-# # this section done initially to make persistent keys.
-# # Also note, I temporarily set /etc/hosts so my host was
-# # b8.nz when running this, since the vpn client config
-# # generator assumes we need to go to that server to get
-# # server keys.
-# vpn-server-setup -rds
-# s cp -r --parents /etc/openvpn/easy-rsa/keys /p/c/filesystem
-# s chown -R 1000:1000 /p/c/filesystem/etc/openvpn/easy-rsa/keys
-# # kw = kgpe work machine.
-# for host in x2 x3 kw; do
-# vpn-mk-client-cert -b $host -n home b8.nz 1196
-# dir=/p/c/machine_specific/$host/filesystem/etc/openvpn/client
-# mkdir -p $dir
-# s bash -c "cp /etc/openvpn/client/home* $dir"
-# # note: /etc/update-resolv-conf-home also exists for all systems with /p
-# done
-
-# key already exists, so this won't generate one, just the configs.
-# m vpn-server-setup -rds
-# sudo tee -a /etc/openvpn/server/server.conf <<'EOF'
-# push "dhcp-option DNS 10.0.0.1"
-# push "route 10.0.0.0 255.255.0.0"
-# client-connect /a/bin/distro-setup/vpn-client-connect
-# EOF
-# sudo sed -i --follow-symlinks 's/10.8./10.9./g;s/^\s*port\s.*/port 1196/' /etc/openvpn/server/server.conf
-
-# if [[ $HOSTNAME == tp ]]; then
-# if [[ -e /lib/systemd/system/openvpn-server@.service ]]; then
-# vpn_service=openvpn-server@server
-# else
-# vpn_service=openvpn@server
-# fi
-# sgo $vpn_service
-# fi
-### end vpn server setup
-
##### rss2email
if mountpoint /p &>/dev/null; then
# note, see bashrc for more documentation.
sgo openvpn-client@hole
fi
-if [[ $HOSTNAME == frodo ]]; then
- vpn-mk-client-cert -b frodo -n hole iankelling.org
-fi
-
############# begin syncthing setup ###########
case $HOSTNAME in
kd|frodo)
####### begin misc packages ###########
+# old location, 2023.
+sudo rm -fv /etc/systemd/system/profanity.service
+case $HOSTNAME in
+ kd)
+ ln -sfT /d/p/profanity ~/.local/share/profanity
+ ln -sfT /d/p/profanity-config ~/.config/profanity
+ source /a/bin/bash_unpublished/source-state
+ if [[ $HOSTNAME == "$HOST2" || ! -e /p/profanity-here ]]; then
+ systemctl --user --now enable profanity
+ fi
+ ;;
+ *)
+
+ ln -sfT /p/profanity ~/.local/share/profanity
+ ln -sfT /p/profanity-config ~/.config/profanity
+ ;;
+esac
+
# template
case $codename in
flidas)
;;
esac
-mkdir -p $tdir
+sudo mkdir -p $tdir
# adapted from /var/lib/dpkg/info/transmission-daemon.postinst
# 450 seems likely to be unused. we need to specify one or else
f=$tdir/transmission-daemon
for d in $tdir/partial-torrents $tdir/torrents $f; do
if [[ ! -d $d ]]; then
- mkdir $d
+ sudo mkdir -p $d
fi
sudo chown -R debian-transmission:user2 $d
done
#
# Changed the cache-size to 256 mb, reduces disk use.
# It is a read & write cache.
+#
+# just fyi: default rpc port is 9091
if ! systemctl is-active transmission-daemon-nn &>/dev/null && \
! systemctl is-active transmission-daemon; then
tmp=$(mktemp)
######### begin transmission client setup ######
+# to connect from a remote client, trans-remote-route in brc2
+
+
if [[ -e /p/transmission-rpc-pass ]]; then
# arch had a default config,
# debian had nothing until you start it.
"profiles" : [
{
"profile-name" : "Default",
- "hostname" : "10.173.0.2",
+ "hostname" : "10.174.2.2",
"rpc-url-path" : "/transmission/rpc",
"username" : "",
"password" : "$rpc_pass",
# general known for debian/ubuntu, not for fedora
m /a/bin/buildscripts/go
+# only needed for rg. cargo takes up 11 gigs, filled up the disk on je.
m /a/bin/buildscripts/rust
m /a/bin/buildscripts/misc
m /a/bin/buildscripts/pithosfly
########### misc stuff
-rm -fv /home/iank/.mpv/watch_later
-rm -rf /home/iank/.mpv
+xdg-settings set default-web-browser abrowser.desktop
+# see current with:
+# xdg-settings get default-web-browser
-if [[ $HOSTNAME != frodo ]]; then
- # remove. i moved this into dns
- echo | s cedit hole /etc/hosts ||:
-fi
+# pressing tab after sdf here:
+# scp sdfbash: set +o noglob: command not found
+# in t11, bash 5.1.16. this fixes it.
+sudo sed -ri 's/([[:space:]]*)(\$reset)$/\1set +o noglob #$reset/' /usr/share/bash-completion/bash_completion
+
+rm -fv /home/iank/.mpv/watch_later
+rm -rf /home/iank/.mpv
if [[ ! -e ~/.local/bin/pip ]]; then
tmp=$(mktemp)
hash -r
fi
+## begin beets
+# soo, apt install beets fails due to wanting a pip package,
+# we find out why it wants this through
+# apt-cache depends --recurse --no-recommends --no-suggests --no-conflicts --no-breaks --no-replaces --no-enhances beets | less
+# python-mediafile requires tox, which requires virtualenv, which requires pip.
+# but, python-mediafile doesn't really require tox, it is specified in
+# ./usr/lib/python3/dist-packages/mediafile-0.9.0.dist-info/METADATA
+# as being required only for testing, but the debian package
+# included it anyways, due to a mistake or bad tooling or something.
+# I don't plan to use tox, so, according to https://serverfault.com/a/251091,
+# we can create and install a dummy package by:
+#
+# "equivs-control <name>, edit the file produced to provide the right
+# dependency and have a nice name, then run equivs-build <name> and
+# finally dpkg -i the resulting .deb file"
+# as of 2023-02, the tox dependency was removed in debian unstable, so
+# this hack will probably go away in t12.
+
+if pcheck beets; then
+ tmpdir="$(mktemp -d)"
+ cd "$tmpdir"
+ # edited from output of equivs-control tox
+ cat >tox <<'EOF'
+Section: python
+Priority: optional
+Standards-Version: 3.9.2
+Package: tox
+Description: tox-dummy
+EOF
+ equivs-build tox
+ sudo dpkg -i tox_1.0_all.deb
+ rm -rf ./tox*
+ pi beets python3-discogs-client
+ cd
+ rm -r "$tmpdir"
+fi
+
+# get rid of annoying message
+s sed -ri "s/^([[:space:]]*ui.print_\('Playing)/#\1/" /usr/share/beets/beetsplug/play.py
+
+
+# notes about barrier
+# run barrier, do the gui config,
+# setup the 2 screens, using hostnames for the new screen.
+# save the server config
+# $HOME/.local/share/barrier/.barrier.conf
+# per the man page.
+#
+# ssl errors, resolved via advice here: https://github.com/debauchee/barrier/issues/231
+# BARRIER_SSL_PATH=~/.local/share/barrier/SSL/
+# mkdir -p "${BARRIER_SSL_PATH}"
+# openssl req -x509 -nodes -days 365 -subj /CN=Barrier -newkey rsa:4096 -keyout ${BARRIER_SSL_PATH}/Barrier.pem -out ${BARRIER_SSL_PATH}/Barrier.pem
+# ran on both machines.
+# When pressing start in the gui, the cli options used are printed to the console,
+# they are useful. So on server, just run barriers, client run barrierc SERVER_IP
### begin timetrap setup
if mountpoint /p &>/dev/null; then
pi desktop-file-utils
m /a/bin/distro-setup/mymimes
-
-# stop autopoping windows when i plug in an android phone.
-# dbus-launch makes this work within an ssh connection, otherwise you get this message,
-# with still 0 exit code.
-# dconf-WARNING **: failed to commit changes to dconf: Cannot autolaunch D-Bus without X11 $DISPLAY
-m dbus-launch gsettings set org.gnome.desktop.media-handling automount-open false
-
+if type -p dbus-launch >/dev/null; then
+ # stop autopoping windows when i plug in an android phone.
+ # dbus-launch makes this work within an ssh connection, otherwise you get this message,
+ # with still 0 exit code.
+ # dconf-WARNING **: failed to commit changes to dconf: Cannot autolaunch D-Bus without X11 $DISPLAY
+ m dbus-launch gsettings set org.gnome.desktop.media-handling automount-open false
+fi
# on grub upgrade, we get prompts unless we do this
devs=()
if grep -xFq $HOSTNAME /a/bin/ds/machine_specific/btrbk.hosts; then
sgo btrbk.timer
fi
-# note: to see when it was last run,
+
+# note: to see when a timer was last run,
# ser list-timers
-case $HOSTNAME in
- kd)
- sgo btrbkrust.timer
- ;;
-esac
### begin prometheus ###
case $HOSTNAME in
kd)
# Font awesome is needed for the alertmanager ui.
- pi prometheus-alertmanager prometheus prometheus-node-exporter fonts-font-awesome
- /a/bin/buildscripts/prometheus
+ pi prometheus-alertmanager prometheus fonts-font-awesome
+ /c/roles/prom/files/simple/usr/local/bin/fsf-install-prometheus
+ # make it available for other machines
+ rsync -a /usr/local/bin/amtool /a/opt/bin
web-conf -p 9091 -f 9090 - apache2 i.b8.nz <<'EOF'
<Location "/">
AuthType Basic
ser restart prometheus-alertmanager
fi
+ s /c/roles/prom_export/files/simple/usr/local/bin/fsf-install-node-exporter -l 127.0.0.1
+
for ser in prometheus-node-exporter prometheus-alertmanager prometheus; do
sysd-prom-fail-install $ser
done
;;
*)
- pi prometheus-node-exporter
+ s /c/roles/prom_export/files/simple/usr/local/bin/fsf-install-node-exporter
;;
esac
+# cleanup old files. 2023-02
+x=(/var/lib/prometheus/node-exporter/*.premerge)
+if [[ -e ${x[0]} ]]; then
+ s rm /var/lib/prometheus/node-exporter/*
+fi
+
+
case $HOSTNAME in
- # frodo needs upgrade first.
- frodo) : ;;
# todo, for limiting node exporter http,
# either use iptables or, in
# /etc/default/prometheus-node-exporter
### begin nagios ###
-pi nagios4
-s rm /etc/apache2/conf-enabled/nagios4-cgi.conf
+pi nagios-nrpe-server
+
+case $HOSTNAME in
+ kd)
+ # the backport is for this bug: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=800345
+ pi nagios4 nagios-nrpe-plugin monitoring-plugins-basic/bullseye-backports
+ s rm -fv /etc/apache2/conf-enabled/nagios4-cgi.conf
-# to add a password for admin:
-# htdigest /etc/nagios4/htdigest.users Nagios4 iank
-# now using the same pass as prometheus
+ # to add a password for admin:
+ # htdigest /etc/nagios4/htdigest.users Nagios4 iank
+ # now using the same pass as prometheus
-# nagstamon auth settings, set to digest instead of basic.
+ # nagstamon auth settings, set to digest instead of basic.
-web-conf -p 3005 - apache2 i.b8.nz <<'EOF'
+ web-conf -p 3005 - apache2 i.b8.nz <<'EOF'
# adapted from /etc/apache2/conf-enabled/nagios4-cgi.conf
ScriptAlias /cgi-bin/nagios4 /usr/lib/cgi-bin/nagios4
#
AuthDigestDomain "Nagios4"
AuthDigestProvider file
- AuthUserFile "/etc/nagios4/htdigest.users"
+ AuthUserFile "/etc/nagios4-htdigest.users"
AuthGroupFile "/etc/group"
AuthName "Nagios4"
AuthType Digest
Options +ExecCGI
</Directory>
EOF
-
+ ;;
+esac
# when you alter a service through the web, it changes vars in /var/lib/nagios4/status.dat. for example:
# notifications_enabled=1
# in the default config, we have these definitions
- # 11 define command {
- # 2 define contact {
- # 1 define contactgroup {
- # 9 define host {
- # 4 define hostgroup {
- # 23 define service {
- # 5 define timeperiod {
+# 11 define command {
+# 2 define contact {
+# 1 define contactgroup {
+# 9 define host {
+# 4 define hostgroup {
+# 23 define service {
+# 5 define timeperiod {
# on klaxon
# 6 define timeperiod
+
+
### end nagios ###
+### begin bitcoin ###
+
+case $HOSTNAME in
+ sy|kd)
+ sudo install -m 0755 -o root -g root -t /usr/bin /a/opt/bitcoin-24.0.1/bin/*
+ sgo bitcoind
+ # note: the bitcoin user & group are setup in fai
+ sudo usermod -a -G bitcoin iank
+ # todo: make bitcoin have a stable uid/gid
+ if [[ ! $(readlink -f /var/lib/bitcoind/wallets) == /q/wallets ]]; then
+ mkdir -p /var/lib/bitcoind
+ chown bitcoin:bitcoin /var/lib/bitcoind
+ # 710 comes from the upstream bitcoin unit file
+ chmod 710 /var/lib/bitcoind
+ s lnf /q/wallets /var/lib/bitcoind
+ sudo chown -h bitcoin:bitcoin /var/lib/bitcoind/wallets
+ fi
+ # note, there exists
+ # /a/bin/ds/disabled/bitcoin
+ ;;
+esac
+
+### end bitcoin
+
+case $HOSTNAME in
+ kw|x3)
+ sd /etc/cups/client.conf <<'EOF'
+ServerName printserver1.office.fsf.org
+EOF
+ ;;
+esac
+
end_msg <<'EOF'
In mate settings settings, change scrolling to two-finger,
pi tor
m /a/bin/buildscripts/tor-browser
# one root command needed to install
-s ln -sf /a/opt/tor-browser_en-US/Browser/start-tor-browser /usr/local/bin
+s ln -sf /a/opt/tor-browser/Browser/start-tor-browser /usr/local/bin
# nfs server
iankelling.org / git / distro-setup / blobdiff