src="${BASH_SOURCE%/*}"
+source $src/pkgs
+
+# see example of usage to understand.
end_msg() {
- = local y
+ local y
IFS= read -r -d '' y ||:
end_msg_var+="$y"
}
esac
pup
+if isdeb; then
+ pi aptitude
+fi
-simple_packages=(
- htop
- mailutils
- nmon
- rdiff-backup
- ruby
- ruby-rest-client
- tree
- vim
- wcd
-)
+simple_packages=(${p3[@]})
case $HOSTNAME in
lj|li) : ;;
*)
- # universal packages
- # swh-plugins is for karaoke pulsaudio filter.
- # mutagen for pithos
- # guvcview set webcam brightness to highest
- # pidgin-otr, i went into pidgin pluggin settings and generated a key for some accounts
- simple_packages+=(
- apache2
- apache2-doc
- apt-doc
- apt-listchanges
- aptitude-doc-en
- bash-doc
- beets
- beets-doc
- binutils-doc
- bind9-doc
- bind9-utils
- bwm-ng
- chromium
- cpio-doc
- cloc
- cpulimit
- cron
- debconf-doc
- dirmngr
- dnsutils
- dnsmasq
- dtrx
- duplicity
- eclipse
- evince
- fdupes
- feh
- filelight
- flashrom
- gawk-doc
- gcc-doc
- gdb
- gdb-doc
- geoip-bin
- git-doc
- git-email
- gitk
- glibc-doc
- goaccess
- gnome-screenshot
- gnome-session-flashback
- guvcview
- i3lock
- inetutils-traceroute
- iproute2-doc
- jq
- kid3-qt
- kid3-cli
- linux-doc
- locate
- lshw
- make-doc
- manpages
- manpages-dev
- meld
- mps-youtube
- mumble
- nagstamon
- nginx-doc
- nmap
- offlineimap
- oathtool
- p7zip
- paprefs
- parted-doc
- pavucontrol
- pdfgrep
- perl-doc
- pianobar
- pidgin
- pidgin-otr
- pry
- python-autopep8
- python3-doc
- python3-mutagen
- qrencode
- reportbug
- $(aptitude show ruby | sed -rn 's/Depends: (.*)/\1/p')-doc
- sqlite3-doc
- squashfs-tools
- swh-plugins
- tar-doc
- tcpdump
- telnet
- transmission-remote-gtk
- vlc
- whois
- wondershaper
- )
+ simple_packages+=(${p4[@]})
spa $(apt-cache search ruby[.0-9]+-doc| awk '{print $1}')
;;
esac
########### begin section including li ################
-
-case $distro in
- fedora) spa unrar ;;
- *) spa unrar-free ;;
-esac
-
+conflink
case $distro in
arch)
esac
-if isdeb; then
- pi debian-goodies
-fi
-
case $distro in
*) pi at ;;&
case $distro in
- debian) pi curl;;
+ debian|trisquel|ubuntu) pi curl;;
arch) : ;;
# fedora: unknown
esac
case $distro in
arch) spa the_silver_searcher ;;
- debian|ubuntu|trisquel) spa silversearcher-ag ;;
+ debian|trisquel|ubuntu) spa silversearcher-ag ;;
# fedora unknown
esac
case $distro in
- debian|ubuntu|trisquel) spa ntp;;
+ debian|trisquel|ubuntu) spa ntp;;
arch)
pi ntp
sgo ntpd
# no equivalent in other distros:
case $distro in
- debian|ubuntu|trisquel)
+ debian|trisquel|ubuntu)
pi aptitude
if ! dpkg -s apt-file &>/dev/null; then
# this condition is just a speed optimization
;;
esac
-case $distro in
- ubuntu|trisquel|debian) spa ack-grep ;;
- arch|fedora) spa ack ;;
- # fedora unknown
-esac
case $distro in
- arch|debian|ubuntu|trisquel)
+ arch|debian|trisquel|ubuntu)
spa bash-completion
;;
# others unknown
s update-rc.d motd disable
fi
;;
- ubuntu|trisquel)
+ trisquel|ubuntu)
# this isn't a complete solution. It still shows me when updates are available,
# but it's no big deal.
s t /etc/update-motd.d/10-help-text /etc/update-motd.d/00-header
fi
# we've got a few dependencies later on, so install them now.
+pi eatmydata; PI_PREFIX=eatmydata
pi "${simple_packages[@]}"
simple_packages=()
### begin docker install ####
-# https://store.docker.com/editions/community/docker-ce-server-debian?tab=description
-pi software-properties-common apt-transport-https
-curl -fsSL https://download.docker.com/linux/debian/gpg | sudo apt-key add -
-sudo add-apt-repository \
- "deb [arch=amd64] https://download.docker.com/linux/debian \
- $(lsb_release -cs) \
+
+if isdeb; then
+ # https://store.docker.com/editions/community/docker-ce-server-debian?tab=description
+ pi software-properties-common apt-transport-https
+ curl -fsSL https://download.docker.com/linux/$(distro-name-compat)/gpg | sudo apt-key add -
+ sudo add-apt-repository \
+ "deb [arch=amd64] https://download.docker.com/linux/$(distro-name-compat) \
+ $(debian-codename-compat) \
stable"
-p update
-pi docker-ce
-sgo docker
+ p update
+ pi docker-ce
+ sgo docker
+ # other distros unknown
+fi
### end docker install ####
+### begin certbot install ###
case $distro in
debian)
# note, need python-certbot-nginx for nginx, but it depends on nginx,
- # and I'm not installing nginx by default right now
- if isdebian-testing; then
- pi --install-suggests certbot
+ # and I'm not installing nginx by default right now.
+ # note python-certbot-apache is in suggests, but so is a doc package that brought in xorg
+ if [[ $(debian-codename) == jessie ]]; then
+ pi -t jessie-backports certbot python-certbot-apache
else
- pi --install-suggests -t jessie-backports certbot
+ pi certbot python-certbot-apache
fi
- # make a version of the certbot timer that emails me.
- x=/systemd/system/certbot
- $sed -r -f - /lib$x.timer <<'EOF' |s dd of=/etc${x}mail.timer
+ ;;
+ trisquel|ubuntu)
+ # not packaged in xenial or flidas
+ pi software-properties-common
+ # this fails with:
+ #
+ # gpg: key 75BCA694: public key "Launchpad PPA for certbot" imported
+ # gpg: Total number processed: 1
+ # gpg: imported: 1
+ # gpg: no valid OpenPGP data found.
+ # Failed to add key.
+ #
+ # but it seems to work fine, perhaps it's only failing on the second run.
+ s add-apt-repository -y ppa:certbot/certbot ||:
+ p update
+ pi python-certbot-apache
+ ;;
+ # todo: other distros unknown
+esac
+# make a version of the certbot timer that emails me.
+x=/systemd/system/certbot
+$sed -r -f - /lib$x.timer <<'EOF' |s dd of=/etc${x}mail.timer
s,^Description.*,\0 mail version,
EOF
- $sed -r -f - /lib$x.service <<'EOF' |s dd of=/etc${x}mail.service
+$sed -r -f - /lib$x.service <<'EOF' |s dd of=/etc${x}mail.service
s,(ExecStart=)(/usr/bin/certbot),\1/a/bin/log-quiet/sysd-mail-once certbotmail \2 --renew-hook /a/bin/distro-setup/certbot-renew-hook,
EOF
- ser daemon-reload
- sgo certbotmail.timer
+ser daemon-reload
+sgo certbotmail.timer
+### end certbot install ###
+
+# dogcam setup
+case $HOSTNAME in
+ lj|li)
+ /a/bin/webcam/install-server
+ ;;
+ kw)
+ /a/bin/webcam/install-client
;;
- # todo: other distros unknown
esac
# website setup
/a/h/build.rb
sudo -E /a/bin/mediawiki-setup/mw-setup-script
- #$src/phab-setup
pi-nostart mumble-server
s $sed -ri "s/^ *(serverpassword=).*/\1$(< /a/bin/bash_unpublished/mumble_pass)/" /etc/mumble-server.ini
sgo mumble-server
- vpn-server-setup -d
- tee /etc/openvpn/client-config/mail <<'EOF'
+ vpn-server-setup -rd
+ s tee /etc/openvpn/client-config/mail <<'EOF'
ifconfig-push 10.8.0.4 255.255.255.0
EOF
+ # it\'s strange. docker seems to make the default for forward
+ # be drop, but then I set it to accept and it\'s stuck that way,
+ # I dun know why. But, let\'s make sure we can forward anyways.
+ s DEBIAN_FRONTEND=noninteractive pi iptables-persistent
+ rm /etc/iptables/rules.v6
+ s tee /etc/iptables/rules.v4 <<'EOF'
+*filter
+-A FORWARD -i tun+ -o eth0 -j ACCEPT
+-A FORWARD -i eth0 -o tun+ -j ACCEPT
+COMMIT
+EOF
+
sudo dd of=/etc/systemd/system/vpnmail.service <<EOF
[Unit]
ser enable vpnmail.service
# needed for li's local mail delivery.
tu /etc/hosts <<<"10.8.0.4 mail.iankelling.org"
- sgo openvpn
+ if [[ -e /lib/systemd/system/openvpn-server@.service ]]; then
+ vpn_service=openvpn-server@server
+ else
+ vpn_service=openvpn@server
+ fi
+ sgo $vpn_service
# setup let's encrypt cert
web-conf apache2 mail.iankelling.org
s rm /etc/apache2/sites-enabled/mail.iankelling.org{,-redir}.conf
# setup one time, with root:www-data, 640
AuthUserFile "/etc/caldav-htpasswd"
Require valid-user
- <Location />
+ </Location>
EOF
# nginx version of above would be:
# auth_basic "Not currently available";
EOF
s sed -i "s#SECRET_REPLACE_ME#$(cat /p/c/machine_specific/li/pump-secret)#" /etc/pump.io.json
- # jessie\'s node is too old
+ # stretch node is too old
# https://nodejs.org/en/download/package-manager/
- curl -sL https://deb.nodesource.com/setup_6.x | sudo -E bash -
- pi nodejs
- cd /home/ian
- rm -rf pump.io.git
- git clone https://github.com/pump-io/pump.io.git
- cd pump.io
+ curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash -
+ pi nodejs graphicsmagick mongodb
+ cd /home/iank
+ if [[ -e pump.io ]]; then
+ cd pump.io
+ git pull
+ else
+ git clone https://github.com/pump-io/pump.io.git
+ cd pump.io
+ fi
# note: doing this or the npm install pump.io as root had problems.
npm install
npm run build
# normally, next command would be
- # s npm install -g databank-mongodb
+ # s npm install -g odb
# but it\'s this until a bug in pump gets fixed
+ # https://github.com/pump-io/pump.io/issues/1287
s npm install -g databank-mongodb@0.19.2
- s useradd -m -s /bin/false pumpio
+ if ! getent passwd pumpio &>/dev/null; then
+ s useradd -m -s /bin/false pumpio
+ fi
sudo -u pumpio mkdir -p /home/pumpio/pumpdata
# for testing browser when only listening to localhost,
# in the pump.io.json, set hostname localhost, urlPort 5233
Type=simple
User=pumpio
Group=pumpio
-ExecStart=/home/ian/pump.io/bin/pump
+ExecStart=/home/iank/pump.io/bin/pump
Environment=NODE_ENV=production
# failed to find databank-mongodb without this.
# I just looked at my environment variables took a guess.
############# begin setup mastodon ##############
+ # main doc is Docker-Guide.md in docs repo
+
# I'd like to try gnu social just cuz of gnu, but it's not being
# well maintained, for example, simple pull requests
# languishing:
# note, docker required, but we installed it earlier
# i subscrubed to https://github.com/docker/compose/releases.atom
- # to deal with updates manually. So far, it means just reving the
- # version number, then restarting docker-compose with
- # cd ~/mastodon
- # docker-compose up -d
- curl -L https://github.com/docker/compose/releases/download/1.13.0/docker-compose-`uname -s`-`uname -m` | s dd of=/usr/local/bin/docker-compose
+ # to see release notes.
+ # i had some problems upgrading. blew things away with
+ # docker-compose down
+ # docker rmi $(docker images -q)
+ # s reboot now
+ # when running docker-compose run, kernel stack traces are printed to the journal.
+ # things seem to succeed, google says nothing, so ignoring them.
+ curl -L https://github.com/docker/compose/releases/download/1.18.0/docker-compose-`uname -s`-`uname -m` | s dd of=/usr/local/bin/docker-compose
s chmod +x /usr/local/bin/docker-compose
cd ~
+ s rm -rf mastodon
i clone https://github.com/tootsuite/mastodon
cd mastodon
# subbed to atom feed to deal with updates
SINGLE_USER_MODE=true
-SMTP_SERVER=10.8.0.4
+SMTP_SERVER=mail.iankelling.org
SMTP_PORT=25
SMTP_LOGIN=li
SMTP_FROM_ADDRESS=notifications@mast.iankelling.org
EOF
for key in PAPERCLIP_SECRET SECRET_KEY_BASE OTP_SECRET; do
- printf "%s=%s" $key "$(docker-compose run --rm web rake secret)" >>.env.production
+ # 1 minute 7 seconds to run this docker command
+ # to generate a secret, and it has ^M chars at the end. wtf. really dumb
+ printf "%s=%s\n" $key "$(docker-compose run --rm web rake secret|dos2unix|tail -n1)" >>.env.production
done
- s cat /etc/mailpass| while read -r domain port pass; do
+ found=false
+ while read -r domain port pass; do
if [[ $domain == mail.iankelling.org ]]; then
- printf "SMTP_PASSWORD=%s" "$pass" >>.env.production
+ found=true
+ # remove the username part
+ pass="${pass#*:}"
+ printf "SMTP_PASSWORD=%s\n" "$pass" >>.env.production
break
fi
- done
-
+ done < <(s cat /etc/mailpass)
+ if ! $found; then
+ echo "$0: error, failed to find mailpass domain for mastadon"
+ exit 1
+ fi
+ # docker compose makes an interface named like br-8f3e208558f2. we need mail to
+ # get routed to us.
+ if ! s /sbin/iptables -t nat -C PREROUTING -i br-+ -p tcp -m tcp --dport 25 -j DNAT --to-destination 10.8.0.4:25; then
+ s /sbin/iptables -t nat -A PREROUTING -i br-+ -p tcp -m tcp --dport 25 -j DNAT --to-destination 10.8.0.4:25
+ fi
+ docker-compose run --rm web rake mastodon:webpush:generate_vapid_key | grep -E '^VAPID_PUBLIC_KEY=|^VAPID_PRIVATE_KEY=' >> .env.production
+ logq docker-compose run --rm web rake db:migrate
docker-compose run --rm web rails assets:precompile
+ # avatar failed to upload, did
+ # docker logs mastodon_web_1
+ # google lead me to this
+ s chown -R 991:991 public/system
+
# docker daemon takes care of starting on boot.
docker-compose up -d
# we use nsupdate to update the ip of home
pi bind9
+ pi znc
+ # znc config generated by doing
+ # znc --makeconf
+ # selected port is also used in erc config
+ # comma separated channel list worked.
+ # while figuring things out, running znc -D for debug in foreground.
+ # to exit and save config:
+ # /msg *status shutdown
+ # configed auth on freenode by following
+ # https://wiki.znc.in/Sasl
+ # created the system service after, and had to do
+ # mv /home/iank/.znc/* /var/lib/znc
+ # sed -i 's,/home/iank/.znc/,/var/lib/znc,' /var/lib/znc/config/znc.conf
+ # and made a copy of the config files into /p/c
+ # added LoadModule = log -sanitize to the top level
+ # to get into the web interface,
+ # cat /etc/letsencrypt/live/iankelling.org/{privkey,cert,chain}.pem > /var/lib/znc/znc.pem
+ # then use non-main browser or else it doesn't allow it based on ocsp stapling from my main site.
+ # i'm going to figure out how to automate this when it expires. i know i can hook a script into the renewal. https://wiki.znc.in/FAQ seems to imply that znc doesn\'t need restart.
+ # todo: in config file AllowWeb = true should be false. better security if that is off unless we need it.
+ # todo: figure out how to make playback in erc happe.n
+ s useradd --create-home -d /var/lib/znc --system --shell /sbin/nologin --comment "Account to run ZNC daemon" --user-group znc || [[ $? == 9 ]] # 9 if it exists already
+ chmod 700 /var/lib/znc
+ s chown -R znc:znc /var/lib/znc/config
+ s dd of=/etc/systemd/system/znc.service 2>/dev/null <<'EOF'
+[Unit]
+Description=ZNC, an advanced IRC bouncer
+After=network-online.target
+
+[Service]
+ExecStart=/usr/bin/znc -f --datadir=/var/lib/znc
+User=znc
+
+[Install]
+WantedBy=multi-user.target
+EOF
+ ser daemon-reload
+ sgo znc
+
echo "$0: $(date): ending now)"
exit 0
;;
esac
+# needed for checkrestart
+if isdeb; then
+ spa debian-goodies
+fi
+
+
+
########### end section including li/lj ###############
-if [[ $HOSTNAME == treetowl ]]; then
+case $distro in
+ debian) spa gnome-session-flashback ;;
+ # flidas is missing dependency gnome-panel. others unknown
+esac
+
+
+
+case $distro in
+ trisquel|ubuntu|debian) spa ack-grep ;;
+ arch|fedora) spa ack ;;
+ # fedora unknown
+esac
+
+
+
+case $distro in
+ debian)
+ pi chromium ;;
+ xenial|ubuntu)
+ wget -qO - https://downloads.iridiumbrowser.de/ubuntu/iridium-release-sign-01.pub|sudo apt-key add -
+ cat <<EOF | sudo tee /etc/apt/sources.list.d/iridium-browser.list
+deb [arch=amd64] https://downloads.iridiumbrowser.de/deb/ stable main
+#deb-src https://downloads.iridiumbrowser.de/deb/ stable main
+EOF
+ p update
+ pi iridium-browser
+ ;;
+esac
+
+case $distro in
+ debian)
+ spa cpio-doc ;;
+ # not packaged in flidas. others unknown. gfdl nonfree issue
+esac
+
+
+
+
+case $distro in
+ fedora) spa unrar ;;
+ *) spa unrar-free ;;
+esac
- # vpn-server setup via:
- vpn-server-setup -r -d
- s tee -a /etc/openvpn/server/server.conf <<'EOF'
+### begin home vpn server setup
+
+
+# # this section done initially to make persistent keys.
+# # Also note, I temporarily set /etc/hosts so my host was
+# # b8.nz when running this, since the vpn client config
+# # generator assumes we need to go to that server to get
+# # server keys.
+# vpn-server-setup -rds
+# s cp -r --parents /etc/openvpn/easy-rsa/keys /p/c/filesystem
+# s chown -R 1000:1000 /p/c/filesystem/etc/openvpn/easy-rsa/keys
+# # kw = kgpe work machine.
+# for host in x2 kw; do
+# vpn-mk-client-cert -b $host -n home b8.nz 1196
+# dir=/p/c/machine_specific/$host/filesystem/etc/openvpn/client
+# mkdir -p $dir
+# s bash -c "cp /etc/openvpn/client/home* $dir"
+# # note: /etc/update-resolv-conf-home also exists for all systems with /p
+# done
+
+# key already exists, so this won't generate one, just the configs.
+vpn-server-setup -rds
+s tee -a /etc/openvpn/server/server.conf <<'EOF'
push "dhcp-option DNS 192.168.1.1"
push "route 192.168.1.0 255.255.255.0"
client-connect /a/bin/distro-setup/vpn-client-connect
EOF
- s sed -i --follow-symlinks 's/10.8./10.9./g' /etc/openvpn/server/server.conf
- ser restart openvpn-server@server
- vpn-mk-client-cert -s /etc/update-resolv-conf-home -c x2 -n home b8.nz
- dir=/p/c/machine_specific/x2/filesystem/etc/openvpn/client
- mkdir -p $dir
- # background: We have these files locally, but we\'d have to duplicate the logic
- # in vpn-mk-client-cert to get them, and this is just simpler.
- scp root@x2:/etc/openvpn/client/home* $dir
+s sed -i --follow-symlinks 's/10.8./10.9./g;s/^\s*port\s.*/port 1196/' /etc/openvpn/server/server.conf
+if [[ $HOSTNAME == tp ]]; then
+ if [[ -e /lib/systemd/system/openvpn-server@.service ]]; then
+ vpn_service=openvpn-server@server
+ else
+ vpn_service=openvpn@server
+ fi
+ sgo $vpn_service
+fi
+### end vpn server setup
+if [[ $HOSTNAME == tp ]]; then
# note, see bashrc for more documentation.
pi rss2email
After=multi-user.target
[Service]
-User=ian
+User=iank
Type=oneshot
# about 24 hours of failures
# it copies over its files without respecting symlinks, so
fi
######### begin pump.io periodic backup #############
-if [[ $HOSTNAME == treetowl ]]; then
+if [[ $HOSTNAME == frodo ]]; then
s dd of=/etc/systemd/system/pumpbackup.service <<'EOF'
[Unit]
Description=pump li backup
After=multi-user.target
[Service]
-User=ian
+User=iank
Type=oneshot
ExecStart=/a/bin/log-quiet/sysd-mail-once pump-backup /a/bin/distro-setup/pump-backup
EOF
######### end pump.io periodic backup #############
case $distro in
- debian|ubuntu|trisquel)
- # suggests because we want the resolvconf package.
+ debian|trisquel|ubuntu)
+ # suggests because we want the resolvconf package. however, i install it earlier
+ # as well, so this is redundant.
# todo: check other distros to make sure it\'s installed
pi-nostart --install-suggests openvpn
# pi-nostart does not disable
spa lib32stdc++6 default-jdk
-if [[ $HOSTNAME == treetowl ]]; then
+if [[ $HOSTNAME == frodo ]]; then
############# begin syncthing setup ###########
# It\'s simpler to just worry about running it in one place for now.
# syncs between comps.
case $distro in
arch) pi syncthing ;;
- ubuntu|trisquel|debian)
+ trisquel|ubuntu|debian)
# testing has relatively up to date packages
if ! isdebian-testing; then
# based on error when doing apt-get update:
pi syncthing
;;
esac
- lnf -T /w/syncthing /home/ian/.config/syncthing
- sgo syncthing@ian # runs as ian
+ lnf -T /w/syncthing /home/iank/.config/syncthing
+ ser daemon-reload # syncthing likely not properly packaged
+ sgo syncthing@iank # runs as iank
# these things persist in ~/.config/syncthing, which I save in
# /w/syncthing (not in /p, because syncthing should continue to
# Set gui username and password.
#
# install syncthing via f-droid,
- # folder setting, turn off master folder (makes it read only).
+ # folder setting, turn off send only.
# on phone, add device, click bar code icon
# on dekstop, top right, actions, device id
# after adding, notification will appear on desktop to confirm
# notification will appear in android\'s notifications, you have to
# swipe down and tap it to add the folder. It won\'t appear in the
# syncthing ui, which would be intuitive, but don\'t wait for it
- # there.
+ # there. The notification may not work, instead open the web gui
+ # from in the app, there should be a notification within there.
#
# On phone, set settings to run syncthing all the time, and
# show no notification.
# no equivalent in other distros:
case $distro in
- debian|ubuntu|trisquel)
+ debian|trisquel|ubuntu)
# for gui bug reporting
spa python-vte
;;
esac
-####### misc packages ###########
+####### begin misc packages ###########
+
+reset-sakura
+sudo -u traci -i reset-sakura
+reset-konsole
+sudo -u traci -i reset-konsole
+reset-xscreensaver
+# this is packaged, but i see it's gotten a fair amount of development lately,
+# so install from cabal. the options are needed to get over incompatible xmonad library versions
+# but that stuff is in the global namespace, and it seems they don't conflict in practice.
+pi libxss-dev # dependency based on build failure
+cabal update
+cabal install --upgrade-dependencies --force-reinstalls arbtt
+lnf -T /m/arbtt-capture.log ~/.arbtt/capture.log
+
+if [[ ! -e ~/.linphonerc && -e /p/.linphonerc-initial ]]; then
+ cp /p/.linphonerc-initial ~/.linphonerc
+fi
+
+
+### begin spd install
+pi libswitch-perl libdigest-md5-file-perl libgnupg-interface-perl
+t=$(mktemp)
+wget -O $t http://mirror.fsf.org/fsfsys-trisquel/fsfsys-trisquel/pool/main/s/spd-perl/spd-perl_0.2-1_amd64.deb
+s dpkg -i $t
+rm $t
+# this guesses at the appropriate directory, adjust if needed
+x=(/usr/lib/x86_64-linux-gnu/perl/5.*)
+sudo ln -sf ../../../perl/5.18.2/SPD/ $x
+# newer distro had gpg2 as default, older one, flidas, need to make it that way
+x=$(which gpg2)
+if [[ $x ]]; then
+ s lnf -T $x /usr/local/bin/gpg
+fi
+### end spd install
+
+
+if [[ $HOSTNAME == kw ]]; then
+ cat <<'EOF'
+NOTE: after this finishes, i did
+s nmtui-connect
+# remove br from auto:
+s vim /etc/network/interfaces
+EOF
+fi
# nagstamon setting which were set through the ui
# in filters tab:
# services on unreachable osts
# hosts in soft state
# services in soft state
-# in display tab: icon in systray.
+# in display tab: fullscreen
+
+# these translate to these settings I think
+# filter_acknowledged_hosts_services = True
+# filter_all_unknown_services = True
+# filter_all_warning_services = True
+# filter_hosts_in_soft_state = True
+# filter_hosts_services_maintenance = True
+# filter_services_in_soft_state = True
+# filter_services_on_down_hosts = True
+# filter_services_on_hosts_in_maintenance = True
+# filter_services_on_unreachable_hosts = True
+# notify_if_up = False
+# statusbar_floating = False
+# fullscreen = True
+# but i'm just going to rely on the webpage plus sms for now.
+
case $distro in
- debian|ubuntu|trisquel)
+ debian|trisquel|ubuntu)
# it asks if it should make users in it's group capture packets without root,
# which is arguably more secure than running wireshark as root. default is no,
# which is what i prefer, since I plan to use tcpdump to input to wireshark.
# others unknown
esac
+# /run and /dev/shm are listed as required for pulseaudio. All 4 in the group
+# listed in the default config as suggested.
+# /run/usr/1000 i noticed was missing for pulseaudio
+# /run/user/0 just seemed like a not bad idea, given the above
+tu /etc/schroot/desktop/fstab <<'EOF'
+/run /run none rw,bind 0 0
+/run/lock /run/lock none rw,bind 0 0
+/dev/shm /dev/shm none rw,bind 0 0
+/run/shm /run/shm none rw,bind 0 0
+/run/user/1000 /run/user/1000 none rw,bind 0 0
+/run/user/1001 /run/user/1001 none rw,bind 0 0
+/run/user/0 /run/user/0 none rw,bind 0 0
+EOF
+
+mkschroot() {
+ n=$1
+ shift
+ apps=($@)
+ d=/nocow/schroot/$n
+ s dd of=/etc/schroot/chroot.d/$n.conf <<EOF
+[$n]
+description=$n
+type=directory
+directory=$d
+profile=desktop
+preserve-environment=true
+users=$USER,traci
+EOF
+ if [[ -e $d/bin ]]; then
+ s chroot $d apt-get update
+ s chroot $d apt-get -y dist-upgrade --purge --auto-remove
+ cd; s schroot -c $n -- apt-get install --allow-unauthenticated -y ${apps[@]}
+ else
+ s mkdir -p $d
+ s debootstrap $n $d http://deb.debian.org/debian/
+ cd; s schroot -c $n -- apt-get install --allow-unauthenticated -y ${apps[@]}
+ fi
+ s cp -P {,$d}/etc/localtime
+}
+s dd of=/etc/systemd/system/schrootupdate.service <<'EOF'
+[Unit]
+Description=schrootupdate
+After=multi-user.target
+
+[Service]
+Type=oneshot
+ExecStart=/a/bin/log-quiet/sysd-mail-once schrootupdate /a/bin/distro-setup/schrootupdate
+EOF
+s dd of=/etc/systemd/system/schrootupdate.timer <<'EOF'
+[Unit]
+Description=schrootupdate
+
+[Timer]
+OnCalendar=*-*-* 04:20:00
+
+[Install]
+WantedBy=timers.target
+EOF
+s systemctl daemon-reload
+sgo schrootupdate.timer
+
+
+
+# for my roommate
case $distro in
- debian|ubuntu|trisquel)
- # no recommends because it wanted some other unstable package, something to
- # do with math or something, which I didn't want to deal with.
- p -y --no-install-recommends install python3-send2trash/unstable anki/unstable
+ trisquel)
+ mkschroot stretch firefox-esr pulseaudio chromium
+ ;;
+esac
+
+s mkdir -p /nocow/user
+s chown $USER:$USER /nocow/user
+case $distro in
+ debian)
+ case $(debian-codename) in
+ jessie)
+ pi anki
+ ;;
+ *)
+ mkschroot jessie anki pulsaudio mplayer
+ ;;
+ esac
+ ;;
+ trisquel|ubuntu)
+ pi anki
;;
# others unknown
esac
case $distro in
- debian|ubuntu|trisquel)
+ debian|trisquel|ubuntu)
# note i had to do this, which is persistent:
# cd /i/k
# s chgrp debian-transmission torrents partial-torrents
# it contains runtime data,
# plus a simple symlink to the config file which it\'s
# not worth separating out.
- s lnf -T /i/transmission-daemon /var/lib/transmission-daemon/.config/transmission-daemon
+ # between comps, the uid can change
+ f=/i/transmission-daemon
+ s lnf -T $f /var/lib/transmission-daemon/.config/transmission-daemon
+ if [[ -e $f ]]; then
+ s chown -R debian-transmission:debian-transmission $f
+ fi
+ for f in /i/k/partial-torrents /i/k/torrents; do
+ if [[ -e $f ]]; then
+ s chown -R debian-transmission:traci $f
+ fi
+ done
+ s chown -R debian-transmission:debian-transmission /var/lib/transmission-daemon
#
# config file documented here, and it\'s the same config
# for daemon vs client, so it\'s documented in the gui.
;;
esac
fi
-if [[ $HOSTNAME == treetowl ]]; then
+
+
+# trisquel 8 = openvpn, debian stretch = openvpn-client
+vpn_ser=openvpn-client
+if [[ ! -e /lib/systemd/system/openvpn-client@.service ]]; then
+ vpn_ser=openvpn
+fi
+
+s dd of=/etc/systemd/system/transmission-daemon-nn.service <<EOF
+[Unit]
+Description=Transmission BitTorrent Daemon netns
+After=network.target
+Requires=${vpn_ser}-nn@client.service
+After=${vpn_ser}-nn@client.service
+JoinsNamespaceOf=${vpn_ser}-nn@client.service
+
+[Service]
+#User=debian-transmission
+# notify type doesn't work with sudo
+#Type=notify
+ExecStart=/usr/bin/nsenter --mount=/root/mount_namespaces/client sudo -u debian-transmission /usr/bin/transmission-daemon -f --log-error
+ExecReload=/bin/kill -s HUP \$MAINPID
+PrivateNetwork=true
+Nice=19
+
+[Install]
+WantedBy=multi-user.target
+EOF
+ser daemon-reload
+
+if [[ $HOSTNAME == frodo ]]; then
sgo transmission-daemon-nn
fi
esac
-pi wget
-case $HOSTNAME in
- tp|frodo)
- case $distro in
- debian|ubuntu|trisquel)
- log=$(mktemp)
- cd /a/opt
- wget -nv -N https://dl.google.com/linux/direct/google-chrome-stable_current_amd64.deb
- errallow
- set -o pipefail
- s dpkg -i google-chrome-stable_current_amd64.deb |& tee $log
- code=$?
- errcatch
- case $code in
- 0) : ;;
- *)
- # previously I had a more specific search, but dpkg
- # changed it\'s output as of 7/2016
- if grep 'dependency problems' \
- $log &>/dev/null; then
- s apt-get -fy install
- else
- exit 1
- fi
- ;;
- esac
- ;;
- arch)
- pi google-chrome
- ;;
- esac
- ;;
-esac
-
# printer
case $distro in
arch)
# In debian, I could use hte recommended driver,
# in arch, I had to pick out the 6L driver.
;;
- debian|ubuntu|trisquel)
+ debian|trisquel|ubuntu)
spa hplip
;;
# other distros unknown
case $distro in
- ubuntu|debian) pi --no-install-recommends mairix notmuch ;;
+ trisquel|ubuntu|debian) pi --no-install-recommends mairix notmuch ;;
fedora|arch) spa mairix notmuch ;;
esac
case $distro in
arch) spa nfs-utils ;;
- ubuntu|debian) spa nfs-client ;;
+ trisquel|ubuntu|debian) spa nfs-client ;;
esac
case $distro in
- ubuntu|debian) spa par2 ;;
+ trisquel|ubuntu|debian) spa par2 ;;
arch|fedora) spa par2cmdline ;;
esac
# needed for my tex resume
case $distro in
- ubuntu|debian) spa texlive-full ;;
+ trisquel|ubuntu|debian) spa texlive-full ;;
arch) spa texlive-most ;;
# fedora unknown
esac
-case $distro in
- ubuntu)
- # flash, unrar, codecs, ms fonts.
- # This has a manual prompt.
- spa ubuntu-restricted-extras
- ;;
- fedora)
- pi yum-utils
- # rpm fusion recommended codecs
- s su -c "yum localinstall -y --nogpgcheck http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-$(rpm -E %fedora).noarch.rpm"
- pi gstreamer-plugins-ugly gstreamer-plugins-bad gstreamer-ffmpeg\
- xine-lib-extras-freeworld
- ;;
-esac
case $distro in
# optional dep for firefox for h.264 video
esac
case $distro in
- fedora|ubuntu|trisquel|debian) spa gnupg-agent ;;
+ fedora|trisquel|ubuntu|debian) spa gnupg-agent ;;
arch) : ;;
esac
case $distro in
arch) spa firefox pulseaudio;;
- *) : ;; # comes default or with other packages
+ trisquel) spa abrowser ;;
+ *) : ;; # comes default or with other packages, or uknown
esac
case $distro in
arch) spa ttf-dejavu;;
- debian|ubuntu|trisquel) spa fonts-dejavu ;;
+ debian|trisquel|ubuntu) spa fonts-dejavu ;;
# others unknown
esac
case $distro in
arch) spa xorg-xev;;
- debian|ubuntu|trisquel) spa x11-utils ;;
+ debian|trisquel|ubuntu) spa x11-utils ;;
# others unknown
esac
case $distro in
arch) pi virt-install;;&
- debian|ubuntu|trisquel) pi virtinst ;;&
+ debian|trisquel|ubuntu) pi virtinst ;;&
*) pi virt-manager ;; # creates the libvirt group in debian at least
# others unknown
esac
# allow user to run vms, from debian handbook
-for x in ian traci; do s usermod -a -G libvirt,kvm $x; done
+for x in iank traci; do s usermod -a -G libvirt,kvm $x; done
# bridge networking as user fails. google lead here, but it doesn\'t work:
# oh well, I give up.
# http://wiki.qemu.org/Features-Done/HelperNetworking
case $distro in
arch) spa cdrkit;;
- debian|ubuntu|trisquel) spa genisoimage;;
+ debian|trisquel|ubuntu) spa genisoimage;;
# others unknown
esac
case $distro in
arch) spa spice-gtk3 ;;
- debian|ubuntu|trisquel) spa spice-client-gtk;;
+ debian|trisquel|ubuntu) spa spice-client-gtk;;
# others unknown
esac
# general known for debian/ubuntu, not for fedora
case $distro in
- debian|ubuntu|trisquel)
+ debian|trisquel|ubuntu)
pi golang-go
# a bit of googling, and added settings to bashrc
go get -u github.com/mvdan/fdroidcl/cmd/fdroidcl
case $distro in
- arch|debian|ubuntu|trisquel) spa pumpa ;;
+ arch|debian|trisquel|ubuntu) spa pumpa ;;
# others unknown. do have a buildscript:
# /a/bin/buildscripts/pumpa ;;
esac
case $distro in
debian) pi adb ;;
- debian|ubuntu|trisquel) spa android-tools-adbd/unstable ;;
+ debian|trisquel|ubuntu) spa android-tools-adbd ;;
+ # todo: not sure this is needed anymore, or if trisqel etc works even
+ # debian) spa android-tools-adbd/unstable ;;
arch) spa android-tools ;;
# other distros unknown
esac
-if [[ $HOSTNAME == treetowl ]]; then
- case $distro in
- debian)
- if [[ `debian-archive` == testing ]]; then
- # has no unstable dependencies
- pi bitcoind/unstable
- src=/a/opt/bitcoin/contrib/init/bitcoind.service
- s cp $src /etc/systemd/system
- p=/etc/bitcoin/bitcoin
- dst=/etc/systemd/system/bitcoinjm.service
- # jm for joinmarket
- $sed -r "/^\s*ExecStart/s,${p}.conf,${p}jm.conf," $src \
- >/etc/systemd/system/bitcoinjm.service
-
- d=jm; jm=d # being clever for succinctness
- for s in d jm; do
- s $sed -ri "/^\s*\[Unit\]/a Conflicts=bitcoin${!s}.service" \
- /etc/systemd/system/bitcoin${s}.service
- done
-
- ser daemon-reload
-
- dir=/nocow/.bitcoin
- s mkdir -p $dir
- s chown -R bitcoin:bitcoin $dir
- dir=/etc/bitcoin
- s mkdir -p $dir
- s chown -R root:bitcoin $dir
- s chmod 750 $dir
-
- # pruning decreases the bitcoin dir to 2 gb, keeps
- # just the recent blocks. can\'t do a few things like
- # import a wallet dump.
- # pruning works, but people had to do
- # some manual stuff in joinmarket. I dun need the
- # disk space, so not bothering yet, maybe in a year or so.
- # https://github.com/JoinMarket-Org/joinmarket/issues/431
- #https://bitcoin.org/en/release/v0.12.0#wallet-pruning
- #prune=550
-
- f=$dir/bitcoin.conf
- s dd of=$f <<EOF
-server=1
-rpcpassword=$(openssl rand -base64 32)
-rpcuser=$(openssl rand -base64 32)
-EOF
-
-
- f2=$dir/bitcoinjm.conf
- s cp $f $f2
- s tee -a $f2 >/dev/null <<EOF
-# Joinmarket
-walletnotify=curl -sI --connect-timeout 1 http://localhost:62602/walletnotify?%s
-alertnotify=curl -sI --connect-timeout 1 http://localhost:62602/alertnotify?%s
-wallet=joinmarket.dat
-EOF
- # dunno about sharing a wallet between multiple instances
- # manually did, wallet.dat symlinked in /nocow/.bitcoin
- sgo bitcoind
- fi
- ;;
- # other distros unknown
- esac
- pi libsodium-dev python-pip
- cd /a/opt/joinmarket
- # using develop branch, as it seems to be mostly bug fixes,
- # and this is quite new software.
- # note: python3 does not work.
- # has seg fault error due to some bug, but it still works
- pip install -r requirements.txt || [[ $? == 139 ]]
- # note, the target must exist ahead of time, or bitcoin
- # just overwrites the link, and it\'s not happy with an empty file,
- # so we have to create the wallet, then move and link it.
- s lnf -T /q/bitcoin/wallet.dat /nocow/.bitcoin/wallet.dat
- s lnf -T /q/bitcoin/joinmarket.dat /nocow/.bitcoin/joinmarket.dat
- # not technically needed, but seems cleaner not to have
- # symlinks be root owned unlike everything else
- s chown -h bitcoin:bitcoin /nocow/.bitcoin/*
-
- for var in rpcuser rpcpassword; do
- u="$(s sed -rn "s/^$var=(.*)/\1/p" /etc/bitcoin/bitcoin.conf)"
- # escape backslashes
- u="${u//\\/\\\\\\\\}"
- # escape commas
- u="${u//,/\\,}"
- sed -ri "s,^(rpc_${var#rpc}\s*=).*,\1 $u," joinmarket.cfg
- done
- sed -ri "s/^\s*(blockchain_source\s*=).*/\1 bitcoin-rpc/" joinmarket.cfg
-
-fi
-
case $distro in
fedora)
cd $(mktemp -d)
- wget http://tamacom.com/global/global-6.3.2.tar.gz
+ wget ftp://ftp.gnu.org/pub/gnu/global/global-6.5.7.tar.gz
ex global*
- cd global-6.3.2
+ cd global-6.5.7
# based on https://github.com/leoliu/ggtags
./configure --with-exuberant-ctags=/usr/bin/ctags
make
arch)
pi python2-pygments
;;
- debian|ubuntu|trisquel)
+ debian|trisquel|ubuntu)
pi python-pygments
;;
esac
case $distro in
debian)
- pi task-cinnamon-desktop
+ pi task-mate-desktop
# in settings, change scrolling to two-finger,
# because the default edge scroll doesn\'t work.
pu transmission-gtk
;;
+ trisquel)
+ # mate-indicator-applet and beyond are msc things I noticed diffing a
+ # standard install with mine.
+ pi xorg lightdm mate-desktop-environment mate-desktop-environment-extras mate-indicator-applet anacron
+ ;;
# others unknown
esac
case $distro in
arch) spa apg ;;
-
- # already in debian jessie
+ # already in debian
esac
# EOF
# s systemctl daemon-reload
# case $HOSTNAME in
-# x2|treetowl)
-# ser enable synergyc@ian
-# ser start synergyc@ian ||: # X might not be running yet
+# x2|tp)
+# ser enable synergyc@iank
+# ser start synergyc@iank ||: # X might not be running yet
# ;;
# frodo)
# systemctl --user start synergys ||:
# esac
-
+pi --no-install-recommends kdeconnect-plasma
### kdeconnect for gnome. started in /a/bin/distro-setup/desktop-20-autostart.sh
-pi libgtk-3-dev python3-requests-oauthlib valac cmake python-nautilus
+### but gnome + xmonad not working in flidas, so i disabled it
+pi libgtk-3-dev python3-requests-oauthlib valac cmake python-nautilus libappindicator3-dev
cd /a/opt/indicator-kdeconnect
mkdir -p build
cd build
cmake .. -DCMAKE_INSTALL_PREFIX=/usr
make
sudo make install
+# we can start it manually with /usr/lib/x86_64-linux-gnu/libexec/kdeconnectd
+# it seems, according to
+# /etc/xdg/autostart/kdeconnectd.desktop
+# I'm not seeing the icon, but the clipboard replication is working
+
+
+### model 01 arduino support ###
+# https://github.com/keyboardio/Kaleidoscope/wiki/Install-Arduino-support-on-Linux
+# also built latest arduino in /a/opt/Arduino, (just cd build; ant build; ant run )
+# set arduino var in bashrc,
+# have system config file setup too.
+sudo adduser $USER dialout
+case $distro in
+ arch)
+ sudo usermod -a -G uucp $USER
+ ;;
+esac
+# this is for the mail command too. update-alternatives is kind of misleading
+# since at least it's main commands pretend mail does not exist.
+# bsd's mail got pulled in on some dumb dependency, i dunno how.
+s update-alternatives --set mailx /usr/bin/mail.mailutils
######### end misc packages #########
########### misc stuff
+
+/a/bin/distro-setup/mymimes
+
+
+# stop autopoping windows when i plug in an android phone.
+# dbus-launch makes this work within an ssh connection, otherwise you get this message,
+# with still 0 exit code.
+# dconf-WARNING **: failed to commit changes to dconf: Cannot autolaunch D-Bus without X11 $DISPLAY
+dbus-launch gsettings set org.gnome.desktop.media-handling automount-open false
+
+
+# on grub upgrade, we get prompts unless we do this
devs=()
for dev in $(s btrfs fi show /boot | sed -nr 's#.*path\s+(\S+)$#\1#p'); do
devs+=($(devbyid $dev),)
done
devs[-1]=${devs[-1]%,} # jonied by commas
-
-# on grub upgrade, we get prompts unless we do this
s debconf-set-selections <<EOF
-grub-pc grub-pc/install_devices multiselect ${devs[*]}
+grub-pc grub-pc/install_devices multiselect ${devs[*]}
EOF
+# btrfs maintenance
+sgo btrfsmaint.timer
+sgo btrfsmaintstop.timer
+
# the wiki backup script from ofswiki.org uses generic paths
s lnf /p/c/machine_specific/li/mw_vars /root
case $distro in
- debian|ubuntu|trisquel)
- case `debian-archive` in
- stable)
- s dd of=/etc/apt/preferences.d/unison-gtk <<'EOF'
-Explanation: Allow unison-gtk to be upgraded
-Package: unison-gtk
-Pin: release a=testing
-Pin-Priority: 500
-EOF
- # dont think using testing is needed since I figured out how to
- # deal with mismatching unison compilers, but I dont
- # see any reason to revert it, since it only installs
- # a single package which is primarily a single binary
- ;;
- esac
- pi unison/testing
- pi unison-gtk/testing # after to make it the default unison
- ;;
- arch)
- pi unison gtk2
+ trisquel|ubuntu|debian)
+ # unison-gtk second, i want it to be default, not sure if that works
+ # with spa. note, I used to install from testing repo when using stable,
+ # but it shouldn't be needed since I wrote a script to handle mismatching
+ # compilers.
+ spa unison unison-gtk
;;
+arch)
+ spa unison gtk2
+ ;;
esac
case $distro in
#
# # disabled due to my patch being in btrbk
# case $distro in
-# arch|debian|ubuntu|trisquel) pi btrbk ;;
+# arch|debian|trisquel|ubuntu) pi btrbk ;;
# # others unknown
# esac
cd /a/opt/btrbk
s make install
spa pv # for progress bar when running interactively.
-if [[ $HOSTNAME == treetowl ]]; then
- # backup/sync manually on others hosts for now.
- sgo btrbk.timer
- # note: to see when it was last run,
- # ser list-timers
-fi
-
-if [[ $HOSTNAME == treetowl ]] && [[ `debian-archive` != testing ]]; then
- # fail2 ban is broken, with a workaround, per
- # https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=770171
- # ill wait a while to see if it gets fixed
- pi fail2ban
- sgo fail2ban
-fi
+# ian: temporarily disabled while hosts are in flux.
+# if [[ $HOSTNAME == tp ]]; then
+# # backup/sync manually on others hosts for now.
+# sgo btrbk.timer
+# # note: to see when it was last run,
+# # ser list-timers
+# fi
case $distro in
- debian|ubuntu|trisquel) s gpasswd -a ian adm ;; #needed for reading logs
+ debian|trisquel|ubuntu) s gpasswd -a iank adm ;; #needed for reading logs
esac
# tor
pi nfs-utils
sgo nfs-server
;;
- debian|ubuntu|trisquel)
+ debian|trisquel|ubuntu)
pi nfs-server
;;
arch)
esac
-########### begin kodi setup ############
-pi kodi
-
-# based on https://wiki.debian.org/SecuringNFS
-# but the quota stuff is either outdated or optional,
-# i guessed that it was not needed and it worked fine.
-s dd of=/etc/sysctl.d/nfs-static-ports.conf <<'EOF'
-fs.nfs.nfs_callback_tcpport = 32764
-fs.nfs.nlm_tcpport = 32768
-fs.nfs.nlm_udpport = 32768
-EOF
-s sysctl --system
-s $sed -ri -f - /etc/default/nfs-common <<'EOF'
-/^\s*STATDOPTS=/d
-$a STATDOPTS="--port 32765 --outgoing-port 32766"
-EOF
-
-s $sed -ri -f - /etc/default/nfs-kernel-server <<'EOF'
-/^\s*RPCMOUNTDOPTS=/d
-$a RPCMOUNTDOPTS="--manage-gids --port 32767"
-EOF
-ser restart nfs-kernel-server
-
-if [[ $HOSTNAME == treetowl ]]; then
- # persistent one time steps for webdav:
- # create persistent password, put it in ~/.kodi/userdata/advancedsettings.xml,
- # per http://kodi.wiki/view/MySQL/Sync_other_parts_of_Kodi
- # htpasswd -c /p/c/filesystem/etc/davpass dav
- # chmod 640 /p/c/filesystem/etc/davpass
- # in conflink, set group to www-data.
- # In kodi, i set the music source, server address: my domain,
- # path: k/music. Then copied the file
- # /p/c/subdir_files/.kodi/userdata/sources.xml to save that setting.
- s a2enmod dav dav_fs
- web-conf -r /a/c/playlists - apache2 dav.$HOME_DOMAIN <<'EOF'
-<Directory /a/c/playlists>
- DAV On
- AuthType Basic
- AuthName "Authentication Required"
- AuthUserFile "/etc/davpass"
- Require valid-user
-
-# outside the standard /var/www, so use this:
- Order allow,deny
- Allow from all
-</Directory>
-EOF
- s mkdir -p /var/www/davlock
- s chown www-data:www-data /var/www/davlock
- s sed -i "1i DavLockDB /var/www/davlock/davlock" /etc/apache2/sites-enabled/dav.$HOME_DOMAIN.conf
- ser reload apache2
-
- teeu /etc/exports "/k/music *(ro,nohide,async,no_subtree_check,insecure)"
- exportfs -ra
-
- # kodi uses sqlite by default, but supports mysql.
- pi mariadb-server
-
- # see ofswiki.org for explanation.
- dbpass="$(cat /p/mysql-root-pass)"
- if ! echo exit|mysql -uroot "-p$dbpass"; then
- echo -e "\n\n$dbpass\n$dbpass\n\n\n\n\n" | mysql_secure_installation
- fi
- mysql -uroot "-p$dbpass" <<EOF
-GRANT ALL PRIVILEGES ON *.* TO 'kodi' IDENTIFIED BY '$(</p/mysql-kodi-pass)';
-EOF
- s sed -ri 's/^(\s*bind-address\s*=).*/\1 0.0.0.0/' /etc/mysql/mariadb.conf.d/50-server.cnf
- ser restart mariadb
-
-fi
-
-########### end kodi setup ############
-if [[ $HOSTNAME == treetowl ]]; then
+if [[ $HOSTNAME == frodo ]]; then
# nohide = export filesystems mounted deeper than the export point
# fsid=0 makes this export the "root" export
# not documented in the man page, but this means
# persistent virtual machines
-
case $distro in
- debian|ubuntu|trisquel)
+ debian|trisquel|ubuntu)
pi libosinfo-bin;
;;
esac
-
-# distro may not know about win 10 yet.
-variant=win7
-if ! virt-install --os-variant list &>/dev/null; then # we are using a newer virt-install
- for v in 10 8.1 8; do
- if osinfo-query os | gr "^\s*win${v/./\\.}\s" &>/dev/null; then
- variant=win$v
- break
- fi
- done
-fi
-
-if ! s virsh list --all --name | grep -xF win10 &>/dev/null; then
-
- # created account with
- # win10vmian@outlook.com, and easy to remember password
- # win 10 virtio, makes disk way way way faster
- # wget https://fedorapeople.org/groups/virt/virtio-win/direct-downloads/latest-virtio/virtio-win.iso
- # https://wiki.archlinux.org/index.php/QEMU#Change_Existing_Windows_VM_to_use_virtio
- # for installing virtio after initial install instead of with initial iso:
- # qemu-img create -f qcow2 fake.qcow2 1G
- # --disk=/a/images/virtio-win.iso,device=cdrom \
- # --disk=/a/images/fake.qcow2,bus=virtio
- # Also,
- # went to device manager, saw 2 pci devices with yellow !,
- # did search for drivers, pick cdrom location, done.
- #
- # from http://www.tenforums.com/tutorials/4189-fast-startup-turn-off-windows-10-a.html.
- # google said there was a control panel option for it, but
- # that turned out to be a lie.
- # Put this in a .bat file and run as administrator to turn off
- # hyberboot which fucks things up.
- # REG ADD "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Power" /V HiberbootEnabled /T REG_dWORD /D 0 /F
- # power settings, turn off display: never
- # run "control userpasswords2", turn on automatic login.
- # note: when changing devices, I just undefine, the create the vm again.
-
- if [[ -e /nocow/user/vms/win10.qcow2 ]]; then
- s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
- --disk=/a/images/win10.qcow2,bus=virtio --vcpus 2 -r 4096 -w bridge=br0 \
- -n win10 --import --os-variant $variant --cpu host-model-only
-
- s virsh destroy win10
- fi
-
- if [[ -e /nocow/user/vms/win7.qcow2 ]]; then
- # this one hasn\'t had the virtio fix done yet.
- s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
- --disk=/a/images/win7.qcow2 --vcpus 2 -r 4096 -w bridge=br0 \
- -n win7 --import --os-variant win7 --cpu host-model-only
- s virsh destroy win7
- # had a problem with --cpu host, so trying out
- # --cpu host-model-only
- fi
-fi
+# if I was going to create a persistent vm, i might do it like this:
+# variant=something # from: virt-install --os-variant list
+# s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
+ # --disk=/a/images/some_name.qcow2,bus=virtio --vcpus 2 -r 4096 -w bridge=br0 \
+ # -n some_name --import --os-variant $variant --cpu host-model-only
-if [[ $HOSTNAME == treetowl ]]; then
- pi samba
- # note samba re-reads it\'s config every 1 minute
- case $distro in
- arch) s cp /etc/samba/smb.conf.default /etc/samba/smb.conf ;;
- esac
-
- # add 2 lines after workgroup option
- s sed -ri --follow-symlinks '/^\s*encrypt passwords\s*=/d' /etc/samba/smb.conf
- s sed -ri --follow-symlinks '/^\s*map to guest\s*=/d' /etc/samba/smb.conf
- s sed -i --follow-symlinks 's/\(\s*workgroup\s*=\).*/\1 WORKGROUP\n\tencrypt passwords = yes\n\tmap to guest = bad password/' /etc/samba/smb.conf
- # remove default homes section. not sharing that.
- s sed -ri --follow-symlinks '/^\s*\[homes\]/,/\s*\[/d' /etc/samba/smb.conf
-
- if ! grep -xF '[public]' /etc/samba/smb.conf &>/dev/null; then
- s tee -a /etc/samba/smb.conf <<'EOF'
-[public]
- guest ok = yes
- read only = no
- path = /kr
-EOF
- fi
-
- case $distro in
- debian|ubuntu|trisquel)
- # systemd claims it generates units from /etc/init.d, but it
- # clearly doesn\'t in debian. I have no idea how they are
- # related. fuck debian right now. It\'s not documented. samba
- # has a systemd init file linked to /dev/null. There\'s this
- # https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=769714 which
- # claims samba\'s sub-services will be started automatically by
- # systemd... it didn\'t on install, wonder if it will on
- # boot. It clued me in how to start it manually though. Nothing
- # in /usr/share/doc/samba, debian admin guide says nothing about
- # any of this. (this is in debian testing as of 4/2016).
-
- s /etc/init.d/samba start
- ;;
- arch)
- sgo samba
- ;;
- esac
-fi
-
-tu /etc/hosts <<< "127.0.1.1 $(hostname).lan $(hostname)"
-
######### begin stuff belonging at the end ##########
-# Apps we want to override others for default file handler:
-# simplest way in debian is to just install them last.
-simple_packages+=(
- mpv
-)
-
case $distro in
ubuntu|debian)
spa spacefm-gtk3 ;;
else
echo "$0: $(date): ending now)"
fi
+exit 0
iankelling.org / git / distro-setup / blobdiff