various fixes

[distro-setup] / distro-end

diff --git a/distro-end b/distro-end
index a5ba321b9812b4e72771880f232a11de6a2d215a..4b73b8b920115caa9463c0be78ba7c9f77d30cab 100755 (executable)
--- a/distro-end
+++ b/distro-end
@@ -525,9 +525,13 @@ Pin-Priority: 500
 EOF
     ;;
   nabia)
+    # note, to get the latest, it would be n=bullseye*
+    # but that has conflicting package versions, so this does the old one.
+    # I only use it for special rare purposes. Just keep in mind it is an
+    # outdated insecure version.
     sd /etc/apt/preferences.d/chromium-bullseye <<EOF
 Package: chromium chromium-* libicu67 libjpeg62-turbo libjsoncpp24 libre2-9 libwebpmux3
-Pin: release o=Debian*,n=bullseye*
+Pin: release o=Debian*,n=bullseye
 Pin-Priority: 500
 EOF
     ;;
@@ -606,6 +610,7 @@ case $HOSTNAME in
     fi
 
     pi prometheus-node-exporter
+    /a/bin/buildscripts/prom-node-exporter -l
 
     # ex for exporter
     web-conf -p 9101 -f 9100 - apache2 ${HOSTNAME}ex.b8.nz <<'EOF'
@@ -843,6 +848,8 @@ EOF
     # https://wiki.znc.in/self-message
     # https://wiki.znc.in/Query_buffers                                                \
       #
+    # for geekshed, there was no sasl support as far as I can tell,
+    # so I set to msg nickserv to identify upon connect.
     if ! getent passwd znc > /dev/null; then
       sudo useradd --create-home -d /var/lib/znc --system --shell /sbin/nologin --comment "Account to run ZNC daemon" --user-group znc
     fi
@@ -1302,18 +1309,21 @@ m reset-xscreensaver
 # cabal update
 # cabal install --upgrade-dependencies  --force-reinstalls arbtt
 # also, i assume syncing this between machines somehow messed up the data.
-if mountpoint /p &>/dev/null; then
-  case $codename in
-    etiona|nabia)
-      pi arbtt
-      # same as seru enable arbtt, but works over ssh when systemctl --user causes error:
-      # Failed to connect to bus: No such file or directory
-      lnf -T  /a/bin/ds/subdir_files/.config/systemd/user/arbtt.service /home/iank/.config/systemd/user/default.target.wants/arbtt.service
-      # allow failure
-      seru start arbtt ||:
-      ;;
-  esac
-fi
+
+## not using arbtt for now
+# if mountpoint /p &>/dev/null; then
+#   case $codename in
+#     etiona|nabia)
+#       pi arbtt
+#       # same as seru enable arbtt, but works over ssh when systemctl --user causes error:
+#       # Failed to connect to bus: No such file or directory
+#       lnf -T  /a/bin/ds/subdir_files/.config/systemd/user/arbtt.service /home/iank/.config/systemd/user/default.target.wants/arbtt.service
+#       # allow failure
+#       seru start arbtt ||:
+#       ;;
+#   esac
+# fi
+rm -fv /home/iank/.config/systemd/user/default.target.wants/arbtt.service
 
 
 m primary-setup
@@ -1401,6 +1411,7 @@ tu /etc/schroot/desktop/fstab <<'EOF'
 /run/user/0    /run/user/0     none    rw,bind         0       0
 EOF
 
+# todo: consider if this should use the new sysd-prom-fail
 sd /etc/systemd/system/schrootupdate.service <<'EOF'
 [Unit]
 Description=schrootupdate
@@ -1548,23 +1559,30 @@ sudo chown -R debian-transmission:debian-transmission /var/lib/transmission-daem
 #
 # Changed the cache-size to 256 mb, reduces disk use.
 # It is a read & write cache.
-sudo ruby <<EOF
+if ! systemctl is-active transmission-daemon-nn &>/dev/null && \
+    ! systemctl is-active transmission-daemon; then
+  tmp=$(mktemp)
+  command sudo ruby <<EOF >$tmp
 require 'json'
 p = '/etc/transmission-daemon/settings.json'
-File.write(p, JSON.pretty_generate(JSON.parse(File.read(p)).merge({
-'rpc-whitelist-enabled' => false,
-'rpc-authentication-required' => false,
-'incomplete-dir' => '$tdir/partial-torrents',
-'incomplete-dir-enabled' => true,
-'download-dir' => '$tdir/torrents',
-"speed-limit-up" => 800,
-"speed-limit-up-enabled" => true,
-"peer-port" => 61486,
-"cache-size-mb" => 256,
-"ratio-limit" => 5.0,
-"ratio-limit-enabled" => false,
-})) + "\n")
+s = {
+  'rpc-whitelist-enabled' => false,
+  'rpc-authentication-required' => false,
+  'incomplete-dir' => '$tdir/partial-torrents',
+  'incomplete-dir-enabled' => true,
+  'download-dir' => '$tdir/torrents',
+  "speed-limit-up" => 800,
+  "speed-limit-up-enabled" => true,
+  "peer-port" => 61486,
+  "cache-size-mb" => 256,
+  "ratio-limit" => 5.0,
+  "ratio-limit-enabled" => false,
+}
+puts(JSON.pretty_generate(JSON.parse(File.read(p)).merge(s)))
 EOF
+  cat $tmp | sudo dd of=/etc/transmission-daemon/settings.json
+
+fi
 
 ####### end transmission
 
@@ -1879,8 +1897,7 @@ esac
 
 case $HOSTNAME in
   kd)
-    # ive got these + a needed dependency pinned to bullseye, just to get
-    # versions more in line with the main docs.
+    /a/bin/buildscripts/prometheus
     # Font awesome is needed for the alertmanager ui.
     pi prometheus-alertmanager prometheus prometheus-node-exporter fonts-font-awesome
     web-conf -p 9091 -f 9090 - apache2 i.b8.nz <<'EOF'
@@ -1893,6 +1910,18 @@ AuthUserFile "/etc/prometheus-htpasswd"
 Require valid-user
 </Location>
 EOF
+
+    web-conf -p 9094 -f 9093 - apache2 i.b8.nz <<'EOF'
+<Location "/">
+AuthType Basic
+AuthName "basic_auth"
+# created with
+# htpasswd -c prometheus-htpasswd USERNAME
+AuthUserFile "/etc/prometheus-htpasswd"
+Require valid-user
+</Location>
+EOF
+
     # by default, the alertmanager web ui is not enabled other than a page
     # that suggests to use the amtool cli. that tool is good, but you cant
     # silence things nearly as fast.
@@ -1935,8 +1964,7 @@ Require valid-user
 </Location>
 EOF
     # For work, i think we will just use the firewall for hosts in the main data center, and
-    # apache/nginx + tls + basic auth outside of it. or consider stunnel.
-
+    # vpn for hosts outside it.
 
     # TODO: figure out how to detect the ping failure and try again.
 
@@ -1998,6 +2026,7 @@ s ln -sf /a/opt/tor-browser_en-US/Browser/start-tor-browser /usr/local/bin
 # nfs server
 pi-nostart nfs-kernel-server
 
+# todo, this is old, probably needs removing
 if [[ $HOSTNAME == tp ]]; then
   sd /etc/wireguard/wg0.conf <<EOF
 [Interface]