#!/bin/bash
-# Copyright (C) 2019 Ian Kelling
-# SPDX-License-Identifier: AGPL-3.0-or-later
+# I, Ian Kelling, follow the GNU license recommendations at
+# https://www.gnu.org/licenses/license-recommendations.en.html. They
+# recommend that small programs, < 300 lines, be licensed under the
+# Apache License 2.0. This file contains or is part of one or more small
+# programs. If a small program grows beyond 300 lines, I plan to switch
+# its license to GPL.
+
+# Copyright 2024 Ian Kelling
+
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+
+# http://www.apache.org/licenses/LICENSE-2.0
+
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
# this gets sourced. shebang is just for file mode detection
# usage mkschroot [-] distro codename packages
# - means no piping in of sources.list
+#
+# note some useful post mkschroot i've used in the past
+# tu /nocow/schroot/flidas/etc/sudoers <<EOF
+# $USER ALL=(ALL) NOPASSWD: ALL
+# Defaults env_keep += SUDOD
+# Defaults always_set_home
+# Defaults !umask
+# EOF
+# sd /nocow/schroot/flidas//etc/locale.gen <<'EOF'
+# en_US.UTF-8 UTF-8
+# EOF
+# s schroot -c flidas locale-gen
+# s schroot -c flidas update-locale LANG=en_US.UTF-8
+
mkschroot() {
local sources force repo n distro
force=false
}
-anki() {
- # crashes on adding new cards in t9
- schroot -c buster -- anki
-}
-
daycat() {
ngset
hrcat /m/md/daylert/{cur,new}/*
# usage: see above
_iki-convert() {
- local url url_prefix path input err repo_dir dir url_dir url name
+ local url url_prefix path input repo_dir dir url_dir url name
url_prefix="$1"
name="${url_prefix%%.*}"
repo_dir="/f/$name"
case $input in
http*)
path="$repo_dir/${input##http*://"$url_prefix"/}"
+ # for files like x.jpg, we dont need to convert the extension.
if [[ $path == */ ]]; then
path=${path%/}.mdwn
+ # brains adds trailing slash, but without trailing is still
+ # valid. We can't be totally sure whether to add mdwn, but we
+ # can guess based on the existence of the file. We can't be sure
+ # because it could be a file like x.jpg, that we just don't have
+ # in our local repo.
+ elif [[ ! -f $path && -e $path.mdwn ]]; then
+ path=${path}.mdwn
fi
j printf "%s\n" "$path"
;;
path=$(fp "$input")
url_dir=$(echo "$path" | sed -r "s,^(/a)?$repo_dir/,,")
url="https://$url_prefix/$url_dir"
- url="${url%.mdwn}/"
+ if [[ $url == *.mdwn ]]; then
+ url="${url%.mdwn}/"
+ fi
j echo "$url"
;;
esac
# background, this relies on how ps converts newlines in arguments to spaces, and
# assumes we won't be searching for a command with spaces in its arguments
rinr() {
+ # shellcheck disable=SC2009 # pgrep has no fixed string option, plus see above.
if ps h -o args -C "${1##*/}" | grep -Fxqv "$*" &>/dev/null || [[ $? == 141 ]]; then
"$@"
fi
finalpath="$cachedir${path#/i/m}"
rowir rsync --partial -a --inplace --mkpath "b8.nz:$path" "$finalpath"
finalnextpath="$cachedir${nextpath#/i/m}"
- count=$(pgrep -a -f "^rsync --partial -a --inplace --mkpath $cachdir" || [[ $? == 1 ]] )
+ count=$(pgrep -a -f "^rsync --partial -a --inplace --mkpath $cachedir" || [[ $? == 1 ]] )
# allow us to start 2 rsyncs in the background
if [[ $count == [01] ]]; then
rinr rsync --partial -a --inplace --mkpath "b8.nz:$nextpath" "$finalnextpath" &
# q quit
# ret next
#
+# todo: enter should also unpause
beetag() {
local last_genre_i fstring tag id char new_item char_i genre tag remove doplay i j random path
local do_rare_genres read_wait help line lsout tmp ls_line skip_lookback
dsign iankelling.org expertpathologyreview.com zroe.org amnimal.ninja
lipush
for h in li bk; do
- m sl $h.b8.nz <<'EOF'
-source ~/.bashrc
-m dnsup
-EOF
+ m ssh $h.b8.nz dnsup
done
}
bindpushb8() {
lipush
for h in li bk; do
- m sl $h <<'EOF'
-source ~/.bashrc
-m dnsb8
-EOF
+ m ssh $h.b8.nz dnsb8
done
}
dnsb8() {
local f=/var/lib/bind/db.b8.nz
m ser stop named
- m sleep 1
- m sudo rm -fv $f.jnl $f.signed.jnl
+ # jbk is like a temp file. dunno if removing it helps
+
+ i=0
+ while pgrep '^named$' &>/dev/null; do
+ sleep .5
+ i=$(( i + 1 ))
+ if (( i > 100 )); then
+ echo "dnsb8: error: timeout waiting for named to exit"
+ return 1
+ fi
+ done
+ m sudo rm -fv $f.jnl $f.signed.jnl $f.jbk
m sudo install -m 644 -o bind -g bind /p/c/machine_specific/vps/bind-initial/db.b8.nz $f
m ser restart named
}
fi
}
+
+
+apache-header() {
+ # First paragraph is to avoid people being confused about why a
+ # file is apache licensed.
+ cat <<'EOF'
+# I, Ian Kelling, follow the GNU license recommendations at
+# https://www.gnu.org/licenses/license-recommendations.en.html. They
+# recommend that small programs, < 300 lines, be licensed under the
+# Apache License 2.0. This file contains or is part of one or more small
+# programs. If a small program grows beyond 300 lines, I plan to switch
+# its license to GPL.
+
+# Copyright 2024 Ian Kelling
+
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+
+# http://www.apache.org/licenses/LICENSE-2.0
+
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+EOF
+
+}
+
+# apply apache to git tracked bash files + README, except files with A?GPL3 header.
+apache-apply-repo() {
+ for f in $(git ls-files); do
+ [[ -L $f || ! -f $f ]] && continue
+ if [[ $f != README ]]; then
+ if ! grep -n '^#!/bin/bash' $f | grep ^1: &>/dev/null; then continue; fi
+ if head -n 10 $f | grep 'it under the terms of the GNU General Public License as published by' &>/dev/null; then continue; fi
+ fi
+ apache-apply $f
+ done
+}
+
+apache-apply() {
+ for file; do
+ if head -n1 "$file"| grep -E '^#!/bin/bash\b' &>/dev/null; then
+ {
+ head -n1 "$file"
+ apache-header
+ tail -n+2 "$file"
+ } | sponge "$file"
+ else
+ {
+ apache-header
+ cat "$file"
+ } | sponge "$file"
+ fi
+ done
+}
+# strip out the apache license from a file.
+apache-strip() {
+ # shellcheck disable=SC2044 # meh
+ for f in $(find . -type f -maxdepth 1); do if head -n1 "$f"| grep -E '^#!/bin/bash\b' &>/dev/null; then { head -n 20 $f | tac | sed '/^# limitations under the License.$/,/^# Copyright.*Ian Kelling$/d' | tac; tail -n+21 $f; } |sponge $f; fi ; done
+}
+
chrome() {
if type -p chromium &>/dev/null; then
cmd=chromium
cd $d$n/"$chan"
hr
for x in *; do
- echo $x; sed "s/^./${x%log}/" $x; hr;
+ # *** are parts and joins and such, and they make reading hard.
+ # I probably will want to see them sometimes, just have to
+ # remove that part.
+ echo $x; sed "s/^./${x%log}/;/\*\*\*/d" $x; hr;
done
done
}
umask $umask_orig
}
-declare -A vpn_ips
-vpn_ips[kd]=2
-# note: 1, 4, 5 are occupied by mail wireguard
-vpn_ips[x3]=8
-vpn_ips[sy]=12
-vpn_ips[x2]=13
-vpn_ips[kw]=27
-vpn_ips[bo]=28
-vpn_ips[frodo]=34
-vpn_ips[s23b]=49
+host-info-all() {
+ host-info-update
+ bindpushb8
+ wrt-setup
+}
+
+
+# if you change a host's ip, then run
+# bindpushb8
+# wrt-setup
+host-info-update() {
+
+ local -A vpn_ips host_ips host_macs nonvpn_ips
+ local -a root_hosts nonroot_hosts
+
+ # the hosts with no mac
+ root_hosts=( bk je li b8.nz )
+ for h in ${root_hosts[@]}; do
+ root_hosts+=(${h}ex)
+ done
+ root_hosts+=(cmc)
+
+ while read -r ip host mac opts; do
+ if [[ $ip == *#* || ! $host ]]; then continue; fi
+ if [[ $opts == vpn ]]; then
+ vpn_ips[$host]=$ip
+ else
+ nonvpn_ips[$host]=$ip
+ fi
+
+
+ if [[ $opts == user=root ]]; then
+ # note: the b8.nz suffix is for the User part, the IdentityFile
+ # part is redundant to *.b8.nz.
+ root_hosts+=($host i$host $host.b8.nz i$host.b8.nz)
+ else
+ nonroot_hosts+=($host i$host)
+ fi
+
+ host_ips[$host]=$ip
+ host_macs[$host]=$mac
+ done </p/c/host-info
+
+ cedit /p/c/subdir_files/.ssh/config <<EOF || [[ $? == 1 ]]
+Host ${nonroot_hosts[@]}
+User iank
+IdentityFile ~/.ssh/home
+
+Host ${root_hosts[@]}
+IdentityFile ~/.ssh/home
+EOF
+
-vpn-ips-update() {
local host ipsuf f files
+
+ sedi '/edits below here are made automatically/,$d' /p/c/machine_specific/li/filesystem/etc/wireguard/wgmail.conf
for host in ${!vpn_ips[@]}; do
ipsuf=${vpn_ips[$host]}
wghole $host $ipsuf
done
{
- for host in ${!vpn_ips[@]}; do
- ipsuf=${vpn_ips[$host]}
- cat <<EOF
-local-data-ptr: "10.2.0.$ipsuf $host.b8.nz"
-EOF
+ echo "cat <<EOF"
+ for host in ${!host_ips[@]}; do
+ ipsuf=${host_ips[$host]}
+ echo 'local-data-ptr: "$l.'$ipsuf $host.b8.nz'"'
done
- } | u /b/ds/ptr-data
+ echo "EOF"
+ } | u /p/c/ptr-data
{
+ echo "cat <<EOF"
+ for host in ${!host_ips[@]}; do
+ ipsuf=${host_ips[$host]}
+ echo "dhcp-host=${host_macs[$host]},set:$host,\$l.$ipsuf,$host"
+ done
+ echo "EOF"
+ } | u /p/c/dnsmasq-data
+
+ {
+ for host in ${!nonvpn_ips[@]}; do
+ ipsuf=${nonvpn_ips[$host]}
+ echo "$host A 10.2.0.$ipsuf"
+ done
for host in ${!vpn_ips[@]}; do
ipsuf=${vpn_ips[$host]}
cat <<EOF
for f in "${files[@]}"; do
host=${f%%/*}
if [[ ! ${vpn_ips[$host]} ]]; then
- e /a/bin/ds/machine_specific/$host/filesystem/etc/systemd/system/openvpn-client-tr@.service
+ e rm /a/bin/ds/machine_specific/$host/filesystem/etc/systemd/system/openvpn-client-tr@.service
fi
done
for f in "${files[@]}"; do
host=${f%%/*}
if [[ ! ${vpn_ips[$host]} ]]; then
- e /p/c/machine_specific/$host/filesystem/etc/wireguard/wghole.conf
- e cedit -s $host /p/c/machine_specific/li/filesystem/etc/wireguard/wgmail.conf '<<<""'
+ e rm /p/c/machine_specific/$host/filesystem/etc/wireguard/wghole.conf
fi
done
}
two=false
case $1 in
- -2) two=true shift ;;
+ -2) two=true; shift ;;
esac
for md; do
mpvd() {
mpv --profile=d "$@";
}
+mpva() {
+ mpv --profile=a "$@";
+}
# mpv all media files in . or $1
mpvm() {
local -a extensions arg
}
spamf() { # spamtest on FILE
- local spamcpre spamdpid
-
if (( $# != 1 )); then
e spamtest error: expected 1 arg, filename >&2
return 1
"$@"
}
-f=/a/f/ansible-configs/files/common/etc/fsf-workstation-bashrc.sh
-if [[ -e $f ]]; then
- # shellcheck disable=SC1090
- source $f
-fi
-
electrum() {
# https://electrum.readthedocs.io/en/latest/tor.html
# https://github.com/spesmilo/electrum-docs/issues/129
}
+# grep + find
+gef() {
+ faf | grep -E "$@" ||:
+ rgv "$@"
+}
+
# rg my main files
rgm() {
rg "$@" /p/w.org /a/t.org /a/work.org /b
find $paths -not \( -name .svn -prune -o -name .git -prune \
-o -name .hg -prune -o -name .editor-backups -prune \
-o -name .undo-tree-history -prune \) 2>/dev/null | grep -iP --color=auto -- "$*" ||:
- rgv -- "$*" $paths /a/t.org /p/w.org /a/work.org ||:
+ rgv $local_rgv_args -g "!bash_unpublished" -- "$*" $paths /a/work.org ||:
}
-reml() { # with limit to 5 matches per file
+reml() { # rem with limit to 5 matches per file
+ local_rgv_args="-m 5"
+ rem "$@"
+}
+
+rep() {
local paths
- paths="/p/c /b"
+ paths="/p/c"
find $paths -not \( -name .svn -prune -o -name .git -prune \
-o -name .hg -prune -o -name .editor-backups -prune \
-o -name .undo-tree-history -prune \) 2>/dev/null | grep -iP --color=auto -- "$*" ||:
- rgv -m 5 -- "$*" $paths /a/t.org /p/w.org /a/work.org ||:
+ rgv $local_rgv_args -- "$*" $paths /a/t.org /p/w.org ||:
+}
+repl() { # rem with limit to 5 matches per file
+ local local_rgv_args="-m 5"
+ rem "$@"
}
+
# re on common fsf files
ref() {
local paths
}
-export GOPATH=$HOME/go
-path-add $GOPATH/bin
-path-add /usr/local/go/bin
# I have the git repo and a release. either one should work.
# I have both because I was trying to solve an issue that
case $HOSTNAME in
sy|kd)
hosts=(
- kd x3.office.fsf.org syw
+ kd.b8.nz x3.office.fsf.org syw x2.b8.nz
)
;;
x3)
units "tempF($1)" tempC
}
+# requires dns/firewall setup first
+local-icecast() {
+ web-conf -e ian@iankelling.org -f 8000 - apache2 live.iankelling.org <<'EOF'
+<Location "/fsf.webm">
+AuthType Basic
+AuthName "basic_auth"
+# created with
+# htpasswd -c icecast-fsf-htpasswd USERNAME
+AuthUserFile "/etc/icecast-fsf-htpasswd"
+Require valid-user
+</Location>
+<Location "/fsf-tech.webm">
+AuthType Basic
+AuthName "basic_auth"
+AuthUserFile "/etc/icecast-fsf-tech-htpasswd"
+Require valid-user
+</Location>
+EOF
+}
+
+# obs screen switching of
+obof() {
+ ls -l /tmp/no-obs-auto-scene-switch
+ touch /tmp/no-obs-auto-scene-switch
+}
+# obs screen switching on
+obon() {
+ ls -l /tmp/no-obs-auto-scene-switch
+ if [[ -e /tmp/no-obs-auto-scene-switch ]]; then
+ rm -f /tmp/no-obs-auto-scene-switch
+ fi
+}
+
+obs-gen-profiles() {
+ local p=/p/c/basic/profiles
+ sed 's/fsf-sysops/fsf-tech/g' $p/fsfsysops/basic.ini >$p/fsftech/basic.ini
+ sed 's/fsf-sysops/fsf/g' $p/fsfsysops/basic.ini >$p/fsf/basic.ini
+}
+
+# terminal clear. like clear, but put the prompt at the bottom,
+# useful for obs streaming the bottom half of a terminal window.
+tclear() {
+ for ((i=0; i<COLUMNS; i++)); do
+ echo
+ done
+}
+
+
export BASEFILE_DIR=/a/bin/fai-basefiles
#export ANDROID_HOME=/a/opt/android-home
iankelling.org / git / distro-setup / blobdiff