trap 'echo "$0:$LINENO:error: \"$BASH_COMMAND\" returned $?" >&2' ERR
+usage() {
+ cat <<EOF
+usage: ${0##*/} [-h] [-t 2|test] [-m WIRELESS_MAC]
+setup my router in general: dhcp, dns, etc.
+
+Type 2 is for setting up a backup device. Type test is for setting up a
+testing device.
+
+Passing an empty string for WIRELESS_MAC will cause the device's native
+mac to be used.
+
+EOF
+
+ exit $1
+}
+
+
+dev2=false
+test=false
+hostname=wrt
+libremanage_host=wrt2
+
+lanip=1
+while getopts hm:t: opt; do
+ case $opt in
+ h) usage ;;
+ t)
+ case $2 in
+ 2)
+ dev2=true
+ lanip=4
+ hostname=wrt2
+ libremanage_host=wrt
+ ;;
+ test)
+ test=true
+ ;;
+ *) echo "$0: unexpected arg to -t: $*" >&2; usage 1 ;;
+ esac
+ ;;
+ m) mac=$OPTARG ;;
+ *) echo "$0: Internal error! unexpected args: $*" >&2 ; usage 1 ;;
+ esac
+done
+shift "$((OPTIND-1))" # Discard the options and sentinel --
+
+if [[ ! $mac ]] && ! $test; then
+ # if we wanted to increment it
+ #WIRELESSMAC=${WIRELESSMAC:0: -1}$((${WIRELESSMAC: -1} + 2))
+ mac=$WIRELESSMAC
+fi
+
+if (( $# != 0 )); then
+ usage 1
+fi
+
+
+macpre=${mac:0: -1}
+macsuf=${mac: -1}
+
pmirror() {
- # background: upgrading all packages is not recommended because it
- # doesn't go into the firmware. build new firmware if you want
- # lots of upgrades. I think /tmp/opkg-lists is a pre openwrt 14 location.
- f=(/tmp/opkg-lists/* /var/opkg-lists/*)
- if ! (( $(date -r $f +%s) + 60*60*24 > $(date +%s) )); then
- opkg update
- fi
+ # background: upgrading all packages is not recommended because it
+ # doesn't go into the firmware. build new firmware if you want
+ # lots of upgrades. I think /tmp/opkg-lists is a pre openwrt 14 location.
+ f=(/var/opkg-lists/*)
+ if ! (( $(date -r $f +%s) + 60*60*24 > $(date +%s) )); then
+ opkg update
+ fi
}
pi() {
- for x in "$@"; do
- if [[ ! $(opkg list-installed "$x") ]]; then
- pmirror
- opkg install "$@"
- fi
- done
+ for x in "$@"; do
+ if [[ ! $(opkg list-installed "$x") ]]; then
+ pmirror
+ opkg install "$@"
+ fi
+ done
}
v() {
- printf "+ %s\n" "$*"
- "$@"
+ printf "+ %s\n" "$*"
+ "$@"
}
+######### uci example:#######
+# # https://wiki.openwrt.org/doc/uci
+# wan_index=$(uci show firewall | sed -rn 's/firewall\.@zone\[([0-9])+\]\.name=wan/\1/p')
+# wan="firewall.@zone[$wan_index]"
+# if [[ $(uci get firewall.@forwarding[0].dest) != $forward_dest ]]; then
+# # default is wan
+# v uci set firewall.@forwarding[0].dest=$forward_dest
+# uci commit firewall
+# firewall_restart=true
+# fi
+####### end uci example #####
+
+uset() {
+ local key="$1"
+ local val="$2"
+ local service="${key%%.*}"
+ restart_var=${service}_restart
+ if [[ ! ${!restart_var} ]]; then
+ eval $restart_var=false
+ fi
+ if [[ $(uci get "$key") != "$val" ]]; then
+ v uci set "$key"="$val"
+ uci commit $service
+ eval $restart_var=true
+ fi
+}
+
+
### network config
###
-l=10.0.0
+ssid="check out gnu.org"
lan=10.0.0.0
+if $test; then
+ ssid="gnuv3"
+ lan=10.1.0.0
+fi
mask=255.255.0.0
+cidr=16
+l=${lan%.0}
+
+passwd -l root ||: #already locked fails
-cat >/usr/bin/arch-pxe-mount <<'EOFOUTER'
+sed -ibak '/^root:/d' /etc/shadow
+# /root/router created by manually running passwd then copying the resulting
+# line. We have no mkpasswd on wrt/librecmc, then we scp it in.
+cat /root/router >>/etc/shadow
+# otherwise, serial console gets root login with no password
+uset system.@system[0].ttylogin 1
+
+
+cat >/usr/bin/archlike-pxe-mount <<'EOFOUTER'
#!/bin/bash
# symlinks are collapsed for nfs mount points, so use a bind mount.
# tried putting this in /etc/config/fstab,
-# then doig block mount, it didn't work. This doesn't persist across reboots,
+# then doing block mount, it didn't work. This doesn't persist across reboots,
# todo: figure that out
-d=/run/archiso/bootmnt
-cat > /etc/fstab <<EOF
+rm -f /etc/fstab
+for d in /run/{arch,parabola}iso/bootmnt; do
+cat >>/etc/fstab <<EOF
/mnt/usb/tftpboot $d none bind 0 0
EOF
mount | grep $d &>/dev/null || mount $d
+done
/etc/init.d/nfsd restart
EOFOUTER
-chmod +x /usr/bin/arch-pxe-mount
+chmod +x /usr/bin/archlike-pxe-mount
-cat >.profile <<'EOF'
-# changing login shell emits spam on ssh single commands & scp
- # sed -i 's#/bin/ash$#/bin/bash#' /etc/passwd
-# https://github.com/openwrt/packages/issues/6137
-[ "$BASH_VERSION" != "" ] || exec /bin/bash -i
-EOF
+sed -i '/^root:/s,/bin/ash$,/bin/bash,' /etc/passwd
+# usb, screen, relay are for libremanage
v pi kmod-usb-storage block-mount kmod-fs-ext4 nfs-kernel-server \
- tcpdump openvpn-openssl adblock
-
+ tcpdump openvpn-openssl adblock libusb-compat /root/relay_1.0-1_mips_24kc.ipk \
+ screen kmod-usb-serial-cp210x kmod-usb-serial-ftdi
+cat >/etc/libremanage.conf <<EOF
+${libremanage_host}_type=switch
+${libremanage_host}_channel=1
+EOF
-sed -ri "s/option[[:space:]]+encryption[[:space:]].*/option encryption psk2/;s/option[[:space:]]+key.*/option key pictionary49/" /etc/config/wireless
-sed -i '/^[[:space:]]*option disabled/d' /etc/config/wireless
-v wifi
v /etc/init.d/fstab enable ||:
# 255 == module already loaded
for mod in scsi_mod sd_mod; do v modprobe $mod || [[ $? == 255 ]]; done
-# for arch pxe. The default settings in the installer expect to find
-# the NFS at /run/archiso/bootmnt
+# for archlike pxe. The default settings in the installer expect to find
+# the NFS at one of these dirs
mkdir -p /run/archiso/bootmnt
+mkdir -p /run/parabolaiso/bootmnt
# todo: at some later time, i found /mnt/usb not mounted, watch to see if
# that is the case after running this or rebooting.
## ian: usb broke on old router. if that happens, can just comment this to disable problems
echo | cedit /etc/config/fstab ||:
-cedit /etc/config/fstab <<'EOF' || { v block umount; v block mount; }
+cedit /etc/config/fstab <<EOF || { v block umount; v block mount; }
config global automount
option from_fstab 1
option anon_mount 1
config mount
+# /overlay is an / overlay mount for installing extra packages, etc.
+# https://openwrt.org/docs/guide-user/additional-software/extroot_configuration
option target /mnt/usb
+# option target /overlay
option device /dev/sda1
option fstype ext4
option options rw,async,noatime,nodiratime
- option enabled 1
+ option enabled 0
EOF
# exportfs -ra wont cut it when its the same path, but now a bind mount
-cedit /etc/exports <<EOF || v /etc/init.d/nfsd restart ||:
-/mnt/usb $lan/$netmask(rw,no_root_squash,insecure,sync,no_subtree_check)
+# todo: restart nfs when nfs is enabled?
+#cedit /etc/exports <<EOF || v /etc/init.d/nfsd restart ||:
+cedit /etc/exports <<EOF ||:
+/mnt/usb $lan/$cidr(rw,no_root_squash,insecure,sync,no_subtree_check)
# for arch pxe
-/run/archiso/bootmnt $lan/$netmask(rw,no_root_squash,insecure,sync,no_subtree_check)
+/run/archiso/bootmnt $lan/$cidr(rw,no_root_squash,insecure,sync,no_subtree_check)
+/run/parabolaiso/bootmnt $lan/$cidr(rw,no_root_squash,insecure,sync,no_subtree_check)
EOF
-v /etc/init.d/portmap start
-v /etc/init.d/nfsd start
-v /etc/init.d/portmap enable
-v /etc/init.d/nfsd enable
+# todo: enable nfs when we need it only.
+# v /etc/init.d/portmap start
+# v /etc/init.d/nfsd start
+# v /etc/init.d/portmap enable
+# v /etc/init.d/nfsd enable
-######### uci example:#######
-# # https://wiki.openwrt.org/doc/uci
-# wan_index=$(uci show firewall | sed -rn 's/firewall\.@zone\[([0-9])+\]\.name=wan/\1/p')
-# wan="firewall.@zone[$wan_index]"
-# if [[ $(uci get firewall.@forwarding[0].dest) != $forward_dest ]]; then
-# # default is wan
-# v uci set firewall.@forwarding[0].dest=$forward_dest
-# uci commit firewall
-# firewall_restart=true
-# fi
+uset dropbear.@dropbear[0].PasswordAuth 0
+uset dropbear.@dropbear[0].RootPasswordAuth 0
+uset dropbear.@dropbear[0].Port 2220
+if ! cmp -s /root/dropbear_rsa_host_key /etc/dropbear/dropbear_rsa_host_key; then
+ cp /root/dropbear_rsa_host_key /etc/dropbear/dropbear_rsa_host_key
+ dropbear_restart=true
+fi
+
+wireless_restart=false
+key=pictionary49
+for x in 0 1; do
+ uset wireless.default_radio$x.ssid "$ssid"
+ uset wireless.default_radio$x.key $key
+ uset wireless.default_radio$x.encryption psk2
+ if [[ $mac ]]; then
+ uset wireless.default_radio$x.macaddr $macpre$((macsuf + 2*x))
+ fi
+ # secondary device has wireless disabled
+ uset wireless.radio$x.disabled $dev2
+done
+
+if $wireless_restart; then
+ v wifi
+fi
########## openvpn exampl
# EOF
+
v cedit /etc/config/network <<EOF || v /etc/init.d/network reload
config 'route' 'transmission'
option 'interface' 'lan'
option 'gateway' '$l.3'
EOF
+firewall_restart=false
v cedit /etc/config/firewall <<EOF || firewall_restart=true
+
+
config redirect
- option name ssh
- option src wan
- option src_dport 22
- option dest_ip $l.8
- option dest lan
+ option name ssh
+ option src wan
+ option src_dport 22
+ option dest_ip $l.8
+ option dest lan
config rule
- option src wan
- option target ACCEPT
- option dest_port 22
+ option src wan
+ option target ACCEPT
+ option dest_port 22
config redirect
- option name sshalt
- option src wan
- option src_dport 2222
- option dest_port 22
- option dest_ip $l.3
- option dest lan
+ option name sshalt
+ option src wan
+ option src_dport 2222
+ option dest_port 22
+ option dest_ip $l.3
+ option dest lan
config rule
- option src wan
- option target ACCEPT
- option dest_port 2222
+ option src wan
+ option target ACCEPT
+ option dest_port 2222
+
+config rule
+ option src wan
+ option target ACCEPT
+ option dest_port 2220
+
config redirect
- option src wan
- option src_dport 443
- option dest lan
- option dest_ip $l.8
- option proto tcp
+ option src wan
+ option src_dport 443
+ option dest lan
+ option dest_ip $l.8
+ option proto tcp
config rule
- option src wan
- option target ACCEPT
- option dest_port 443
- option proto tcp
+ option src wan
+ option target ACCEPT
+ option dest_port 443
+ option proto tcp
config redirect
- option src wan
- option src_dport 1196
- option dest lan
- option dest_ip $l.8
- option proto udp
+ option src wan
+ option src_dport 1196
+ option dest lan
+ option dest_ip $l.8
+ option proto udp
config rule
- option src wan
- option target ACCEPT
- option dest_port 1196
- option proto udp
+ option src wan
+ option target ACCEPT
+ option dest_port 1196
+ option proto udp
config redirect
- option src wan
- option src_dport 80
- option dest lan
- option dest_ip $l.8
- option proto tcp
+ option src wan
+ option src_dport 80
+ option dest lan
+ option dest_ip $l.8
+ option proto tcp
config rule
- option src wan
- option target ACCEPT
- option dest_port 80
- option proto tcp
+ option src wan
+ option target ACCEPT
+ option dest_port 80
+ option proto tcp
config redirect
- option name syncthing
- option src wan
- option src_dport 22001
- option dest_ip $l.8
- option dest lan
+ option name syncthing
+ option src wan
+ option src_dport 22001
+ option dest_ip $l.8
+ option dest lan
+config rule
+ option src wan
+ option target ACCEPT
+ option dest_port 22001
+
+
config rule
- option src wan
- option target ACCEPT
- option dest_port 22001
+ option name ssh-ipv6
+ option src wan
+ option dest lan
+ # note, using mac transform, we could allow all traffic to a host like this,
+ # replacing 1 as appropriate
+ #option dest_ip ::111:11ff:fe11:1111/::ffff:ffff:ffff:ffff
+ option dest_port 22
+ option target ACCEPT
+ option family ipv6
+config rule
+ option name http-ipv6
+ option src wan
+ option dest lan
+ option dest_port 80
+ option target ACCEPT
+ option family ipv6
+
+config rule
+ option name http-ipv6
+ option src wan
+ option dest lan
+ option dest_port 80
+ option target ACCEPT
+ option family ipv6
+
+config rule
+ option name node-exporter
+ option src wan
+ option dest lan
+ option dest_port 9101
+ option target ACCEPT
+ option family ipv6
+
+config rule
+ option name mail587-ipv6
+ option src wan
+ option dest lan
+ option dest_port 587
+ option target ACCEPT
+ option family ipv6
EOF
dnsmasq_restart=false
-mail_host=$(grep -F mail.iankelling.org /etc/hosts | awk '{print $1}')
v cedit /etc/hosts <<EOF || dnsmasq_restart=true
127.0.1.1 wrt
$l.1 wrt
$l.2 kd
$l.3 frodo
-$l.4 htpc
+$l.4 wrt2
$l.5 x2
$l.6 demohost
-#$l.7 faiserver
-$l.8 tp faiserver b8.nz
-$l.9 n5
-$l.10 so
-$l.12 fz
+$l.7 x3
+$l.8 tp b8.nz faiserver
+$l.9 bb8
72.14.176.105 li
-45.33.9.11 lj
-138.68.10.24 dopub
+
# netns creation looks for next free subnet starting at 10.173, but I only
# use one, and I would keep this one as the first created.
10.173.0.2 transmission
EOF
+#mail_host=$(grep -F mail.iankelling.org /etc/hosts | awk '{print $1}')
# if [[ $mail_host ]]; then
# sed -i '/^$mail_host/a mail.iankelling.org' /etc/hosts
# fi
# avoid using the dns servers that my isp tells me about.
if [[ $(uci get dhcp.@dnsmasq[0].resolvfile 2>/dev/null) ]]; then
- # default is '/tmp/resolv.conf.auto', we switch to the dnsmasq default of
- # /etc/resolv.conf. not sure why I did this.
- v uci delete dhcp.@dnsmasq[0].resolvfile
- uci commit dhcp
- dnsmasq_restart=true
-fi
-
-if [[ $(uci get dhcp.@dnsmasq[0].domain) != b8.nz ]]; then
- v uci set dhcp.@dnsmasq[0].domain=b8.nz
- uci commit dhcp
- dnsmasq_restart=true
-fi
-if [[ $(uci get dhcp.@dnsmasq[0].local) != b8.nz ]]; then
- v uci set dhcp.@dnsmasq[0].local=/b8.nz/
- uci commit dhcp
- dnsmasq_restart=true
-fi
-
-if [[ $(uci get system.@system[0].hostname) != wrt ]]; then
- v uci set system.@system[0].hostname=wrt
- uci commit system
+ # default is '/tmp/resolv.conf.auto', we switch to the dnsmasq default of
+ # /etc/resolv.conf. not sure why I did this.
+ v uci delete dhcp.@dnsmasq[0].resolvfile
+ uci commit dhcp
+ dnsmasq_restart=true
fi
+uset dhcp.@dnsmasq[0].domain b8.nz
+uset dhcp.@dnsmasq[0].local /b8.nz/
+uset system.@system[0].hostname $hostname
if [[ $(uci get adblock.global.adb_enabled) != 1 ]]; then
v uci set adblock.global.adb_enabled=1
# top port, iPXE (PCI 04:00.0) in seabios boot menu
#dhcp-host=c8:60:00:2b:15:07,set:kd,$l.2,kd
dhcp-host=00:26:18:97:bb:16,set:frodo,$l.3,frodo
-dhcp-host=10:78:d2:da:29:22,set:htpc,$l.4,htpc
+# 4 is reserved for a staticly configured host.
dhcp-host=00:1f:16:16:39:24,set:x2,$l.5,x2
-#dhcp-host=00:c0:ca:27:e9:b2,set:x2w,$l.11,x2w
-#wireless interface
-# this is so fai can have an explicit name to use for testing,
+# This is so fai can have an explicit name to use for testing,
# or else any random machine which did a pxe boot would get
# reformatted. The mac is from doing a virt-install, cancelling it,
# and copying the generated mac, so it should be randomish.
dhcp-host=52:54:00:9c:ef:ad,set:demohost,$l.6,demohost
-#dhcp-host=52:54:00:56:09:f9,set:faiserver,$l.7,faiserver
+dhcp-host=00:1f:16:14:01:d8,set:tp,$l.7,x3
dhcp-host=80:fa:5b:1c:6e:cf,set:tp,$l.8,tp
-# this is the ip it picks by default if dhcp fails,
+
+# faiserver vm
+dhcp-host=52:54:00:56:09:f9,set:faiserver,$l.15,faiserver
+
+# This is the ip it picks by default if dhcp fails,
# so might as well use it.
# hostname is the name it uses according to telnet
dhcp-host=b4:75:0e:94:29:ca,set:switch9429ca,$l.251,switch9429ca
tftp-root=/mnt/usb/tftpboot
EOF
+uset network.lan.ipaddr $l.$lanip
+uset network.lan.netmask $mask
+uset dhcp.wan.ignore $dev2 # default is false
+uset dhcp.lan.ignore $dev2 # default is false
+if $dev2; then
+ uset network.lan.gateway $l.1
+ uset network.wan.proto none
+ uset network.wan6.proto none
+else
+ # these are the defaults
+ uset network.lan.gateway ''
+ uset network.wan.proto dhcp
+ uset network.wan6.proto dhcpv6
+fi
+
+
if $dnsmasq_restart; then
- v /etc/init.d/dnsmasq restart
+ v /etc/init.d/dnsmasq restart
fi
if $firewall_restart; then
- v /etc/init.d/firewall restart
+ v /etc/init.d/firewall restart
+fi
+
+
+
+if $network_restart; then
+ reboot
fi
+if $dropbear_restart; then
+ v /etc/init.d/dropbear restart
+fi
+
+exit 0
iankelling.org / git / automated-distro-installer / blobdiff