set -eE -o pipefail
trap 'echo "$0:$LINENO:error: \"$BASH_COMMAND\" returned $?" >&2' ERR
+dev2=false
+if [[ $1 == -2 ]]; then
+ dev2=true
+fi
pmirror() {
- # background: upgrading all packages is not recommended because it
- # doesn't go into the firmware. build new firmware if you want
- # lots of upgrades. I think /tmp/opkg-lists is a pre openwrt 14 location.
- f=(/tmp/opkg-lists/* /var/opkg-lists/*)
- if ! (( $(date -r $f +%s) + 60*60*24 > $(date +%s) )); then
- opkg update
- fi
+ # background: upgrading all packages is not recommended because it
+ # doesn't go into the firmware. build new firmware if you want
+ # lots of upgrades. I think /tmp/opkg-lists is a pre openwrt 14 location.
+ f=(/var/opkg-lists/*)
+ if ! (( $(date -r $f +%s) + 60*60*24 > $(date +%s) )); then
+ opkg update
+ fi
}
pi() {
- for x in "$@"; do
- if [[ ! $(opkg list-installed "$x") ]]; then
- pmirror
- opkg install "$@"
- fi
- done
+ for x in "$@"; do
+ if [[ ! $(opkg list-installed "$x") ]]; then
+ pmirror
+ opkg install "$@"
+ fi
+ done
}
v() {
- printf "+ %s\n" "$*"
- "$@"
+ printf "+ %s\n" "$*"
+ "$@"
}
### network config
###
-l=10.0.0
+ssid="check out gnu.org"
lan=10.0.0.0
+if $dev2; then
+ ssid="test1"
+ lan=10.1.0.0
+fi
mask=255.255.0.0
+l=${lan%.0}
-cat >/usr/bin/arch-pxe-mount <<'EOFOUTER'
+passwd -l root ||: #already locked fails
+
+cat >/usr/bin/archlike-pxe-mount <<'EOFOUTER'
#!/bin/bash
# symlinks are collapsed for nfs mount points, so use a bind mount.
# tried putting this in /etc/config/fstab,
-# then doig block mount, it didn't work. This doesn't persist across reboots,
+# then doing block mount, it didn't work. This doesn't persist across reboots,
# todo: figure that out
-d=/run/archiso/bootmnt
-cat > /etc/fstab <<EOF
+rm -f /etc/fstab
+for d in /run/{arch,parabola}iso/bootmnt; do
+cat >>/etc/fstab <<EOF
/mnt/usb/tftpboot $d none bind 0 0
EOF
mount | grep $d &>/dev/null || mount $d
+done
/etc/init.d/nfsd restart
EOFOUTER
-chmod +x /usr/bin/arch-pxe-mount
+chmod +x /usr/bin/archlike-pxe-mount
-cat >.profile <<'EOF'
-# changing login shell emits spam on ssh single commands & scp
- # sed -i 's#/bin/ash$#/bin/bash#' /etc/passwd
-# https://github.com/openwrt/packages/issues/6137
-[ "$BASH_VERSION" != "" ] || exec /bin/bash -i
-EOF
+sed -i '/^root:/s,/bin/ash$,/bin/bash,' /etc/passwd
v pi kmod-usb-storage block-mount kmod-fs-ext4 nfs-kernel-server \
- tcpdump openvpn-openssl adblock
+ tcpdump openvpn-openssl adblock libusb-compat /root/relay_1.0-1_mips_24kc.ipk
-sed -ri "s/option[[:space:]]+encryption[[:space:]].*/option encryption psk2/;s/option[[:space:]]+key.*/option key pictionary49/" /etc/config/wireless
-sed -i '/^[[:space:]]*option disabled/d' /etc/config/wireless
-v wifi
v /etc/init.d/fstab enable ||:
# 255 == module already loaded
for mod in scsi_mod sd_mod; do v modprobe $mod || [[ $? == 255 ]]; done
-# for arch pxe. The default settings in the installer expect to find
-# the NFS at /run/archiso/bootmnt
+# for archlike pxe. The default settings in the installer expect to find
+# the NFS at one of these dirs
mkdir -p /run/archiso/bootmnt
+mkdir -p /run/parabolaiso/bootmnt
# todo: at some later time, i found /mnt/usb not mounted, watch to see if
# that is the case after running this or rebooting.
## ian: usb broke on old router. if that happens, can just comment this to disable problems
echo | cedit /etc/config/fstab ||:
-cedit /etc/config/fstab <<'EOF' || { v block umount; v block mount; }
+cedit /etc/config/fstab <<EOF || { v block umount; v block mount; }
config global automount
option from_fstab 1
option anon_mount 1
config mount
+# /overlay is an / overlay mount for installing extra packages, etc.
+# https://openwrt.org/docs/guide-user/additional-software/extroot_configuration
option target /mnt/usb
+# option target /overlay
option device /dev/sda1
option fstype ext4
option options rw,async,noatime,nodiratime
- option enabled 1
+ option enabled 0
EOF
# exportfs -ra wont cut it when its the same path, but now a bind mount
-cedit /etc/exports <<EOF || v /etc/init.d/nfsd restart ||:
+# todo: restart nfs when nfs is enabled?
+#cedit /etc/exports <<EOF || v /etc/init.d/nfsd restart ||:
+cedit /etc/exports <<EOF ||:
/mnt/usb $lan/$netmask(rw,no_root_squash,insecure,sync,no_subtree_check)
# for arch pxe
/run/archiso/bootmnt $lan/$netmask(rw,no_root_squash,insecure,sync,no_subtree_check)
+/run/parabolaiso/bootmnt $lan/$netmask(rw,no_root_squash,insecure,sync,no_subtree_check)
EOF
-v /etc/init.d/portmap start
-v /etc/init.d/nfsd start
-v /etc/init.d/portmap enable
-v /etc/init.d/nfsd enable
+# todo: enable nfs when we need it only.
+# v /etc/init.d/portmap start
+# v /etc/init.d/nfsd start
+# v /etc/init.d/portmap enable
+# v /etc/init.d/nfsd enable
# fi
+uset() {
+ local key="$1"
+ local val="$2"
+ local service="${key%%.*}"
+ restart_var=${service}_restart
+ if [[ ! ${!restart_var} ]]; then
+ eval $restart_var=false
+ fi
+ if [[ $(uci get "$key") != "$val" ]]; then
+ v uci set "$key"="$val"
+ uci commit $service
+ eval $restart_var=true
+ fi
+}
+
+uset dropbear.@dropbear[0].PasswordAuth 0
+uset dropbear.@dropbear[0].RootPasswordAuth 0
+uset dropbear.@dropbear[0].Port 2220
+
+wireless_restart=false
+key=pictionary49
+for x in 0 1; do
+ uset wireless.default_radio$x.ssid "$ssid"
+ uset wireless.default_radio$x.key $key
+ uset wireless.default_radio$x.encryption psk2
+ if [[ $(uci get wireless.radio$x.disabled 2>/dev/null) ]]; then
+ v uci delete wireless.radio$x.disabled
+ wireless_restart=true
+ fi
+done
+
+if $wireless_restart; then
+ v wifi
+fi
+
########## openvpn exampl
########## missing firewall settings for routing lan
# EOF
+
v cedit /etc/config/network <<EOF || v /etc/init.d/network reload
config 'route' 'transmission'
option 'interface' 'lan'
option 'gateway' '$l.3'
EOF
+firewall_restart=false
v cedit /etc/config/firewall <<EOF || firewall_restart=true
config redirect
option name ssh
option target ACCEPT
option dest_port 2222
+config rule
+ option src wan
+ option target ACCEPT
+ option dest_port 2220
+
+
config redirect
option src wan
option src_dport 443
dnsmasq_restart=false
-mail_host=$(grep -F mail.iankelling.org /etc/hosts | awk '{print $1}')
v cedit /etc/hosts <<EOF || dnsmasq_restart=true
127.0.1.1 wrt
$l.1 wrt
$l.4 htpc
$l.5 x2
$l.6 demohost
-#$l.7 faiserver
+$l.7 x3
$l.8 tp faiserver b8.nz
-$l.9 n5
-$l.10 so
-$l.12 fz
72.14.176.105 li
-45.33.9.11 lj
-138.68.10.24 dopub
+
# netns creation looks for next free subnet starting at 10.173, but I only
# use one, and I would keep this one as the first created.
10.173.0.2 transmission
EOF
+#mail_host=$(grep -F mail.iankelling.org /etc/hosts | awk '{print $1}')
# if [[ $mail_host ]]; then
# sed -i '/^$mail_host/a mail.iankelling.org' /etc/hosts
# fi
# avoid using the dns servers that my isp tells me about.
if [[ $(uci get dhcp.@dnsmasq[0].resolvfile 2>/dev/null) ]]; then
- # default is '/tmp/resolv.conf.auto', we switch to the dnsmasq default of
- # /etc/resolv.conf. not sure why I did this.
- v uci delete dhcp.@dnsmasq[0].resolvfile
- uci commit dhcp
- dnsmasq_restart=true
-fi
-
-if [[ $(uci get dhcp.@dnsmasq[0].domain) != b8.nz ]]; then
- v uci set dhcp.@dnsmasq[0].domain=b8.nz
- uci commit dhcp
- dnsmasq_restart=true
-fi
-if [[ $(uci get dhcp.@dnsmasq[0].local) != b8.nz ]]; then
- v uci set dhcp.@dnsmasq[0].local=/b8.nz/
- uci commit dhcp
- dnsmasq_restart=true
-fi
-
-if [[ $(uci get system.@system[0].hostname) != wrt ]]; then
- v uci set system.@system[0].hostname=wrt
- uci commit system
+ # default is '/tmp/resolv.conf.auto', we switch to the dnsmasq default of
+ # /etc/resolv.conf. not sure why I did this.
+ v uci delete dhcp.@dnsmasq[0].resolvfile
+ uci commit dhcp
+ dnsmasq_restart=true
fi
+uset dhcp.@dnsmasq[0].domain b8.nz
+uset dhcp.@dnsmasq[0].local /b8.nz/
+uset system.@system[0].hostname wrt
if [[ $(uci get adblock.global.adb_enabled) != 1 ]]; then
v uci set adblock.global.adb_enabled=1
dhcp-host=00:26:18:97:bb:16,set:frodo,$l.3,frodo
dhcp-host=10:78:d2:da:29:22,set:htpc,$l.4,htpc
dhcp-host=00:1f:16:16:39:24,set:x2,$l.5,x2
-#dhcp-host=00:c0:ca:27:e9:b2,set:x2w,$l.11,x2w
-#wireless interface
-# this is so fai can have an explicit name to use for testing,
+# This is so fai can have an explicit name to use for testing,
# or else any random machine which did a pxe boot would get
# reformatted. The mac is from doing a virt-install, cancelling it,
# and copying the generated mac, so it should be randomish.
dhcp-host=52:54:00:9c:ef:ad,set:demohost,$l.6,demohost
-#dhcp-host=52:54:00:56:09:f9,set:faiserver,$l.7,faiserver
+dhcp-host=00:1f:16:14:01:d8,set:tp,$l.7,x3
dhcp-host=80:fa:5b:1c:6e:cf,set:tp,$l.8,tp
-# this is the ip it picks by default if dhcp fails,
+
+# faiserver vm
+dhcp-host=52:54:00:56:09:f9,set:faiserver,$l.15,faiserver
+
+# This is the ip it picks by default if dhcp fails,
# so might as well use it.
# hostname is the name it uses according to telnet
dhcp-host=b4:75:0e:94:29:ca,set:switch9429ca,$l.251,switch9429ca
EOF
if $dnsmasq_restart; then
- v /etc/init.d/dnsmasq restart
+ v /etc/init.d/dnsmasq restart
fi
if $firewall_restart; then
- v /etc/init.d/firewall restart
+ v /etc/init.d/firewall restart
fi
+
+uset network.lan.ipaddr $l.1
+uset network.lan.netmask $mask
+
+if $network_restart; then
+ reboot
+fi
+if $dropbear_restart; then
+ v /etc/init.d/dropbear restart
+fi
+
+exit 0
iankelling.org / git / automated-distro-installer / blobdiff