# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
set -eE -o pipefail
trap 'echo "$0:$LINENO:error: \"$BASH_COMMAND\" returned $?" >&2' ERR
usage() {
cat <<EOF
-usage: ${0##*/} [-h] [-t 2|3|test] [-m WIRELESS_MAC]
+usage: ${0##*/} [-h] [-t 2|3|test|client] [-m WIRELESS_MAC]
setup my router in general: dhcp, dns, etc.
Type 2 or 3 is for setting up a backup device, there are two kinds so
that you can switch the main device to a backup, then a backup to the
main. Type test is for setting up a testing device.
-Passing an empty string for WIRELESS_MAC will cause the device's native
-mac to be used.
+Passing an empty string for WIRELESS_MAC, or if none is defined in the
+secrets file, will cause the device's native mac to be used.
EOF
+dnsmasq_restart=false
+firewall_restart=false
dev2=false
test=false
libremanage_host=wrt2
-if [[ -e /p/router-secrets ]]; then
- source /p/router-secrets
+secrets=false
+if [[ -e /root/router-secrets ]]; then
+ secrets=true
+ source /root/router-secrets
fi
rmac=$(cat /sys/class/net/eth0/address)
-if [[ $rhost ]]; then
+if $secrets; then
hostname=${rhost[$rmac]}
fi
: ${hostname:=wrt}
test)
test=true
;;
+ client)
+ client=true
+ ;;
*) echo "$0: unexpected arg to -t: $*" >&2; usage 1 ;;
esac
;;
done
shift "$((OPTIND-1))" # Discard the options and sentinel --
-if [[ ! $mac ]] && ! $test; then
+if [[ ! $mac ]] && ! $test && $secrets; then
# if we wanted to increment it
- #WIRELESSMAC=${WIRELESSMAC:0: -1}$((${WIRELESSMAC: -1} + 2))
- mac=$WIRELESSMAC
+ #mac=${mac:0: -1}$((${mac: -1} + 2))
+ mac=${rwmac[$rmac]}
fi
if (( $# != 0 )); then
### network config
###
-ssid="check out gnu.org"
lan=10.0.0.0
if $test; then
- ssid="gnuv3"
lan=10.1.0.0
elif [[ $hostname == cmc ]]; then
- ssid=Svenska
lan=10.2.0.0
+elif $client; then
+ lan=10.3.0.0
+fi
+
+if $test; then
+ ssid="gnuv3"
+elif $secrets; then
+ ssid=${rssid[$rmac]}
fi
-if [[ $rkey ]]; then
+: ${ssid:=librecmc}
+
+
+if $secrets; then
key=${rkey[$rmac]}
fi
: ${key:=pictionary49}
uset network.lan.ipaddr $l.$lanip
uset network.lan.netmask $mask
-if $dev2; then
- uset network.lan.gateway $l.1
- uset network.wan.proto none
- uset network.wan6.proto none
+if $dev2 || $client; then
+ if $dev2; then
+ uset network.lan.gateway $l.1
+ uset network.wan.proto none
+ uset network.wan6.proto none
+ fi
/etc/init.d/dnsmasq stop
/etc/init.d/dnsmasq disable
/etc/init.d/odhcpd stop
fi
wireless_restart=false
-for x in 0 1; do
- uset wireless.default_radio$x.ssid "$ssid"
- uset wireless.default_radio$x.key $key
- uset wireless.default_radio$x.encryption psk2
- if [[ $mac ]]; then
- uset wireless.default_radio$x.macaddr $macpre$((macsuf + 2*x))
- fi
- # secondary device has wireless disabled
- uset wireless.radio$x.disabled $dev2
-done
-if $wireless_restart; then
- v wifi
+if $client; then
+ uset wireless.default_radio0.network 'wwan'
+ uset wireless.default_radio0.ssid ${rclientssid[$rmac]}
+ uset wireless.default_radio0.encryption 'psk2'
+ uset wireless.default_radio0.device 'radio0'
+ uset wireless.default_radio0.mode 'sta'
+ uset wireless.default_radio0.bssid ${rclientbssid[$rmac]}
+ # todo: look into whether 5g network is available.
+ uset wireless.default_radio0.key ${rclientkey[$rmac]}
+ uset wireless.radio0.disabled false
+ uset wireless.radio1.disabled true
+else
+ for x in 0 1; do
+ uset wireless.default_radio$x.ssid "$ssid"
+ uset wireless.default_radio$x.key $key
+ uset wireless.default_radio$x.encryption psk2
+ if [[ $mac ]]; then
+ uset wireless.default_radio$x.macaddr $macpre$((macsuf + 2*x))
+ fi
+ # secondary device has wireless disabled
+ uset wireless.radio$x.disabled $dev2
+ done
fi
+
+
# usb, screen, relay are for libremanage
# rsync is for brc
+#
+# relay package temporarily disabled
+# /root/relay_1.0-1_mips_24kc.ipk
v pi kmod-usb-storage block-mount kmod-fs-ext4 nfs-kernel-server \
- tcpdump openvpn-openssl adblock libusb-compat /root/relay_1.0-1_mips_24kc.ipk \
+ tcpdump openvpn-openssl adblock libusb-compat \
screen kmod-usb-serial-cp210x kmod-usb-serial-ftdi rsync
cat >/etc/libremanage.conf <<EOF
wgip6=fdfd::1/64
wgport=26000
+network_restart=false
+if $client; then
+ v cedit wific /etc/config/network <<EOF || network_restart=true
+# https://openwrt.org/docs/guide-user/network/wifi/connect_client_wifi
+config interface 'wwan'
+ option proto 'dhcp'
+EOF
+fi
-v cedit /etc/config/network <<EOF || v /etc/init.d/network reload
+v cedit /etc/config/network <<EOF || network_restart=true
config 'route' 'transmission'
option 'interface' 'lan'
option 'target' '10.173.0.0'
list allowed_ips 'fdfd::2/64'
EOF
-
-firewall_restart=false
+if $network_restart; then
+ v /etc/init.d/network reload
+fi
firewall-cedit() {
- v cedit /etc/config/firewall <<EOF
+ if $client; then
+ v cedit wific /etc/config/firewall <<EOF
+config zone
+ option name wwan
+ option input REJECT
+ option output ACCEPT
+ option forward REJECT
+ option masq 1
+ option mtu_fix 1
+ option network wwan
+EOF
+ fi
+
+ case $hostname in
+ wrt)
+ v cedit host /etc/config/firewall <<EOF
+config redirect
+ option name ssh
+ option src wan
+ option src_dport 22
+ option dest_ip $l.3
+ option dest lan
+EOF
+ ;;
+ cmc)
+ v cedit host /etc/config/firewall <<EOF
config redirect
option name ssh
option src wan
option src_dport 22
option dest_ip $l.2
option dest lan
+EOF
+ ;;
+ esac
+
+ v cedit /etc/config/firewall <<EOF
config rule
option src wan
option target ACCEPT
option src wan
option src_dport 2202
option dest_port 22
- option dest_ip $l.8
+ option dest_ip $l.2
option dest lan
config rule
option src wan
option target ACCEPT
option dest_port 2202
-config redirect
- option name sshfrodo
- option src wan
- option src_dport 2203
- option dest_port 22
- option dest_ip $l.3
- option dest lan
-config rule
- option src wan
- option target ACCEPT
- option dest_port 2203
-
config redirect
option name sshx2
option src wan
option target ACCEPT
option dest_port 2208
-
+config redirect
+ option name sshbb8
+ option src wan
+ option src_dport 2209
+ option dest_port 22
+ option dest_ip $l.9
+ option dest lan
config rule
- option name sshwrt
option src wan
option target ACCEPT
- option dest_port 2220
+ option dest_port 2209
+config redirect
+ option name icecast
+ option src wan
+ option src_dport 8000
+ option dest_port 8000
+ option dest_ip $l.2
+ option dest lan
config rule
- option name wg
option src wan
option target ACCEPT
- option dest_port $wgport
- option proto udp
+ option dest_port 8000
-
-config redirect
- option name vpntp
+config rule
+ option name sshwrt
option src wan
- option src_dport 1196
- option dest lan
- option dest_ip $l.8
- option proto udp
+ option target ACCEPT
+ option dest_port 2220
+
config rule
+ option name wg
option src wan
option target ACCEPT
- option dest_port 1196
+ option dest_port $wgport
option proto udp
config redirect
- option name httptp
+ option name httpkd
option src wan
option src_dport 80
option dest lan
- option dest_ip $l.8
+ option dest_ip $l.2
option proto tcp
config rule
option src wan
option proto tcp
config redirect
- option name httpstp
+ option name httpskd
option src wan
option src_dport 443
option dest lan
- option dest_ip $l.8
+ option dest_ip $l.2
option proto tcp
config rule
option src wan
fi
-dnsmasq_restart=false
+
v cedit /etc/hosts <<EOF || dnsmasq_restart=true
127.0.1.1 $hostname
-$l.1 $hostname b8.nz
-$l.2 kd faiserver
-$l.3 frodo
-$l.4 wrt2
-$l.5 x2
-$l.6 demohost
#$l.7 x3
-$l.8 tp
-$l.9 bb8
-$l.14 wrt3
-2600:3c00::f03c:91ff:fe6d:baf8 li
+$l.12 demohost
+$l.13 trp
72.14.176.105 li
-2a01:7e01::f03c:91ff:feb5:baec l2
-172.105.84.95 l2
+2600:3c00::f03c:91ff:fe6d:baf8 li
# netns creation looks for next free subnet starting at 10.173, but I only
# use one, and I would keep this one as the first created.
10.173.0.2 transmission
EOF
+case $hostname in
+ cmc)
+ v cedit host /etc/hosts <<EOF || dnsmasq_restart=true
+$l.1 $hostname
+$l.2 kd b8.nz faiserver
+#$l.3 frodo
+$l.4 wrt2
+$l.5 x2
+$l.6 x2w
+$l.7 rp
+$l.8 tp
+$l.9 bb8
+$l.14 wrt3
+#$l.18 x3
+$l.19 brother
+$l.25 hp
+#$l.28 frodow
+EOF
+ ;;
+esac
+
#mail_host=$(grep -F mail.iankelling.org /etc/hosts | awk '{print $1}')
# if [[ $mail_host ]]; then
uset dhcp.@dnsmasq[0].domain b8.nz
uset dhcp.@dnsmasq[0].local /b8.nz/
uset system.@system[0].hostname $hostname
-
-if [[ $(uci get adblock.global.adb_enabled) != 1 ]]; then
- v uci set adblock.global.adb_enabled=1
+# uci doesnt seem to have a way to set an empty value,
+# if you delete it, it goes back to the default. this seems
+# to be a decent workaround.
+# todo: setup /etc/resolv.conf to point to 127.0.0.1
+uset dhcp.@dnsmasq[0].resolvfile=/dev/null
+
+# disabled for now. i want to selectively enable it
+# for specific hosts.
+if [[ $(uci get adblock.global.adb_enabled) != 0 ]]; then
+ v uci set adblock.global.adb_enabled=0
uci commit adblock
/etc/init.d/adblock restart
fi
server=/_dmarc.b8.nz/#
server=/ns1.b8.nz/#
server=/ns2.b8.nz/#
+server=/bk.b8.nz/#
+server=/je.b8.nz/#
mx-host=b8.nz,mail.iankelling.org,10
txt-record=b8.nz,"v=spf1 a ?all"
# top port, iPXE (PCI 04:00.0) in seabios boot menu
#dhcp-host=c8:60:00:2b:15:07,set:kd,$l.2,kd
dhcp-host=00:26:18:97:bb:16,set:frodo,$l.3,frodo
-# 4 is reserved for a staticly configured host.
-dhcp-host=00:1f:16:16:39:24,set:x2,$l.5,x2
+# 4 is reserved for a staticly configured host wrt2
+# old x2 with bad fan
+#dhcp-host=00:1f:16:16:39:24,set:x2,$l.5,x2
+dhcp-host=f0:de:f1:81:ec:88,set:x2,$l.5,x2
+dhcp-host=c4:8e:8f:44:f5:63,set:x2w,$l.6,x2w
# This is so fai can have an explicit name to use for testing,
# or else any random machine which did a pxe boot would get
# reformatted. The mac is from doing a virt-install, cancelling it,
# and copying the generated mac, so it should be randomish.
-dhcp-host=52:54:00:9c:ef:ad,set:demohost,$l.6,demohost
-dhcp-host=00:1f:16:14:01:d8,set:tp,$l.7,x3
+dhcp-host=fa:08:f8:4c:14:1c,set:tp,$l.7,rp
dhcp-host=80:fa:5b:1c:6e:cf,set:tp,$l.8,tp
+dhcp-host=52:54:00:9c:ef:ad,set:demohost,$l.12,demohost
+dhcp-host=62:03:cb:a8:3e:a3,set:trp,$1.13,trp
+dhcp-host=00:1f:16:14:01:d8,set:tp,$l.18,x3
+# BRN001BA98CA823 in dhcp logs
+dhcp-host=00:1b:a9:8c:a8:23,set:tp,$l.19,brother
+dhcp-host=38:63:bb:07:5a:f9,set:tp,$l.25,hp
+dhcp-host=00:26:b6:f6:0f:e9,set:frodow,$l.28,frodow
+
# faiserver vm
dhcp-host=52:54:00:56:09:f9,set:faiserver,$l.15,faiserver
enable-tftp=br-lan
tftp-root=/mnt/usb/tftpboot
dhcp-optsfile=/etc/dnsmasq-dhcpopts.conf
-EOF
-
+#log-queries=extra
+EOF
if $dnsmasq_restart && ! $dev2; then
v /etc/init.d/firewall restart
fi
+# this may just restart the network and take care of the network_restart below.
+if $wireless_restart; then
+ v wifi
+fi
# todo: we should catch errors and still run this if needed
if $network_restart; then