# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
set -eE -o pipefail
trap 'echo "$0:$LINENO:error: \"$BASH_COMMAND\" returned $?" >&2' ERR
usage() {
cat <<EOF
-usage: ${0##*/} [-h] [-t 2|3|test] [-m WIRELESS_MAC]
+usage: ${0##*/} [-h] [-t 2|3|test|client] [-m WIRELESS_MAC]
setup my router in general: dhcp, dns, etc.
Type 2 or 3 is for setting up a backup device, there are two kinds so
that you can switch the main device to a backup, then a backup to the
main. Type test is for setting up a testing device.
-Passing an empty string for WIRELESS_MAC will cause the device's native
-mac to be used.
+Passing an empty string for WIRELESS_MAC, or if none is defined in the
+secrets file, will cause the device's native mac to be used.
EOF
test)
test=true
;;
+ client)
+ client=true
+ ;;
*) echo "$0: unexpected arg to -t: $*" >&2; usage 1 ;;
esac
;;
lan=10.1.0.0
elif [[ $hostname == cmc ]]; then
lan=10.2.0.0
+elif $client; then
+ lan=10.3.0.0
fi
if $test; then
uset network.lan.ipaddr $l.$lanip
uset network.lan.netmask $mask
-if $dev2; then
- uset network.lan.gateway $l.1
- uset network.wan.proto none
- uset network.wan6.proto none
+if $dev2 || $client; then
+ if $dev2; then
+ uset network.lan.gateway $l.1
+ uset network.wan.proto none
+ uset network.wan6.proto none
+ fi
/etc/init.d/dnsmasq stop
/etc/init.d/dnsmasq disable
/etc/init.d/odhcpd stop
fi
wireless_restart=false
-for x in 0 1; do
- uset wireless.default_radio$x.ssid "$ssid"
- uset wireless.default_radio$x.key $key
- uset wireless.default_radio$x.encryption psk2
- if [[ $mac ]]; then
- uset wireless.default_radio$x.macaddr $macpre$((macsuf + 2*x))
- fi
- # secondary device has wireless disabled
- uset wireless.radio$x.disabled $dev2
-done
-if $wireless_restart; then
- v wifi
+if $client; then
+ uset wireless.default_radio0.network 'wwan'
+ uset wireless.default_radio0.ssid ${rclientssid[$rmac]}
+ uset wireless.default_radio0.encryption 'psk2'
+ uset wireless.default_radio0.device 'radio0'
+ uset wireless.default_radio0.mode 'sta'
+ uset wireless.default_radio0.bssid ${rclientbssid[$rmac]}
+ # todo: look into whether 5g network is available.
+ uset wireless.default_radio0.key ${rclientkey[$rmac]}
+ uset wireless.radio0.disabled false
+ uset wireless.radio1.disabled true
+else
+ for x in 0 1; do
+ uset wireless.default_radio$x.ssid "$ssid"
+ uset wireless.default_radio$x.key $key
+ uset wireless.default_radio$x.encryption psk2
+ if [[ $mac ]]; then
+ uset wireless.default_radio$x.macaddr $macpre$((macsuf + 2*x))
+ fi
+ # secondary device has wireless disabled
+ uset wireless.radio$x.disabled $dev2
+ done
fi
+
+
# usb, screen, relay are for libremanage
# rsync is for brc
+#
+# relay package temporarily disabled
+# /root/relay_1.0-1_mips_24kc.ipk
v pi kmod-usb-storage block-mount kmod-fs-ext4 nfs-kernel-server \
- tcpdump openvpn-openssl adblock libusb-compat /root/relay_1.0-1_mips_24kc.ipk \
+ tcpdump openvpn-openssl adblock libusb-compat \
screen kmod-usb-serial-cp210x kmod-usb-serial-ftdi rsync
cat >/etc/libremanage.conf <<EOF
wgip6=fdfd::1/64
wgport=26000
+network_restart=false
+if $client; then
+ v cedit wific /etc/config/network <<EOF || network_restart=true
+# https://openwrt.org/docs/guide-user/network/wifi/connect_client_wifi
+config interface 'wwan'
+ option proto 'dhcp'
+EOF
+fi
-v cedit /etc/config/network <<EOF || v /etc/init.d/network reload
+v cedit /etc/config/network <<EOF || network_restart=true
config 'route' 'transmission'
option 'interface' 'lan'
option 'target' '10.173.0.0'
list allowed_ips 'fdfd::2/64'
EOF
-
+if $network_restart; then
+ v /etc/init.d/network reload
+fi
firewall-cedit() {
+
+ if $client; then
+ v cedit wific /etc/config/firewall <<EOF
+config zone
+ option name wwan
+ option input REJECT
+ option output ACCEPT
+ option forward REJECT
+ option masq 1
+ option mtu_fix 1
+ option network wwan
+EOF
+ fi
+
case $hostname in
wrt)
v cedit host /etc/config/firewall <<EOF
option src wan
option src_dport 2202
option dest_port 22
- option dest_ip $l.8
+ option dest_ip $l.2
option dest lan
config rule
option src wan
option target ACCEPT
option dest_port 2208
+config redirect
+ option name sshbb8
+ option src wan
+ option src_dport 2209
+ option dest_port 22
+ option dest_ip $l.9
+ option dest lan
+config rule
+ option src wan
+ option target ACCEPT
+ option dest_port 2209
+
config redirect
option name icecast
option src wan
config redirect
- option name vpntp
- option src wan
- option src_dport 1196
- option dest lan
- option dest_ip $l.8
- option proto udp
-config rule
- option src wan
- option target ACCEPT
- option dest_port 1196
- option proto udp
-
-
-config redirect
- option name httptp
+ option name httpkd
option src wan
option src_dport 80
option dest lan
- option dest_ip $l.8
+ option dest_ip $l.2
option proto tcp
config rule
option src wan
option proto tcp
config redirect
- option name httpstp
+ option name httpskd
option src wan
option src_dport 443
option dest lan
- option dest_ip $l.8
+ option dest_ip $l.2
option proto tcp
config rule
option src wan
case $hostname in
cmc)
v cedit host /etc/hosts <<EOF || dnsmasq_restart=true
-$l.1 $hostname b8.nz
-$l.2 kd
-$l.3 frodo
+$l.1 $hostname
+$l.2 kd b8.nz faiserver
+#$l.3 frodo
$l.4 wrt2
-$l.5 x2 faiserver
+$l.5 x2
$l.6 x2w
$l.7 rp
$l.8 tp
$l.14 wrt3
#$l.18 x3
$l.19 brother
-$l.28 frodow
+$l.25 hp
+#$l.28 frodow
EOF
;;
esac
# uci doesnt seem to have a way to set an empty value,
# if you delete it, it goes back to the default. this seems
# to be a decent workaround.
+# todo: setup /etc/resolv.conf to point to 127.0.0.1
uset dhcp.@dnsmasq[0].resolvfile=/dev/null
# disabled for now. i want to selectively enable it
server=/ns1.b8.nz/#
server=/ns2.b8.nz/#
server=/bk.b8.nz/#
+server=/je.b8.nz/#
mx-host=b8.nz,mail.iankelling.org,10
txt-record=b8.nz,"v=spf1 a ?all"
dhcp-host=00:1f:16:14:01:d8,set:tp,$l.18,x3
# BRN001BA98CA823 in dhcp logs
dhcp-host=00:1b:a9:8c:a8:23,set:tp,$l.19,brother
+dhcp-host=38:63:bb:07:5a:f9,set:tp,$l.25,hp
dhcp-host=00:26:b6:f6:0f:e9,set:frodow,$l.28,frodow
EOF
-
-
if $dnsmasq_restart && ! $dev2; then
v /etc/init.d/dnsmasq restart
fi
v /etc/init.d/firewall restart
fi
+# this may just restart the network and take care of the network_restart below.
+if $wireless_restart; then
+ v wifi
+fi
# todo: we should catch errors and still run this if needed
if $network_restart; then