-dnsmasq_restart=false
-firewall_restart=false
-dev2=false
-test=false
-libremanage_host=wrt2
secrets=false
if [[ -e /root/router-secrets ]]; then
: ${hostname:=wrt}
+dnsmasq_restart=false
+firewall_restart=false
+dev2=false
+test=false
+client=false
+libremanage_host=wrt2
lanip=1
while getopts hm:t: opt; do
case $opt in
uset wireless.radio0.disabled false
uset wireless.radio1.disabled true
else
+ # defaults, just reseting in case client config ran
+ uset wireless.default_radio0.network lan
+ uset wireless.default_radio0.mode ap
for x in 0 1; do
uset wireless.default_radio$x.ssid "$ssid"
uset wireless.default_radio$x.key $key
}
firewall-cedit || firewall_restart=true
-if ! uci get firewall.@zone[1].network | grep wg0 &>/dev/null; then
- # cant mix cedit plus uci
- echo | cedit /etc/config/firewall ||:
- uci add_list firewall.@zone[1].network=wg0
- uci commit firewall
- firewall-cedit ||:
- firewall_restart=true
-fi
+# not using wireguard for now
+# if ! uci get firewall.@zone[1].network | grep wg0 &>/dev/null; then
+# # cant mix cedit plus uci
+# echo | cedit /etc/config/firewall ||:
+# uci add_list firewall.@zone[1].network=wg0
+# uci commit firewall
+# firewall-cedit ||:
+# firewall_restart=true
+# fi
v cedit /etc/hosts <<EOF || dnsmasq_restart=true
127.0.1.1 $hostname
-#$l.7 x3
-$l.12 demohost
-$l.13 trp
-72.14.176.105 li
-2600:3c00::f03c:91ff:fe6d:baf8 li
-
-# netns creation looks for next free subnet starting at 10.173, but I only
-# use one, and I would keep this one as the first created.
-10.173.0.2 transmission
EOF
+# not sure this case statement is needed
case $hostname in
cmc)
v cedit host /etc/hosts <<EOF || dnsmasq_restart=true
$l.1 $hostname
-$l.2 kd b8.nz faiserver
-#$l.3 frodo
-$l.4 wrt2
-$l.5 x2
-$l.6 x2w
-$l.7 rp
-$l.8 tp
-$l.9 bb8
-$l.14 wrt3
-#$l.18 x3
-$l.19 brother
-$l.25 hp
-#$l.28 frodow
+# 127.0.0.1 www.youtube.com
+# 127.0.0.1 googlevideo.com
+# 127.0.0.1 youtu.be
+# 127.0.0.1 youtube-nocookie.com
+# 127.0.0.1 youtube.com
+# 127.0.0.1 youtube.googleapis.com
+# 127.0.0.1 youtubei.googleapis.com
+# 127.0.0.1 ytimg.com
+# 127.0.0.1 ytimg.l.google.com
EOF
;;
esac
uset dhcp.@dnsmasq[0].domain b8.nz
-uset dhcp.@dnsmasq[0].local /b8.nz/
uset system.@system[0].hostname $hostname
+uset dhcp.@dnsmasq[0].local
+
# uci doesnt seem to have a way to set an empty value,
# if you delete it, it goes back to the default. this seems
# to be a decent workaround.
# todo: setup /etc/resolv.conf to point to 127.0.0.1
-uset dhcp.@dnsmasq[0].resolvfile=/dev/null
+uset dhcp.@dnsmasq[0].resolvfile /dev/null
+
+# by default it will send out ipv6 dns, like this
+# NetworkManager[953]: <info> [1614982580.5192] dhcp6 (wlan0): option dhcp6_name_servers => 'fd58:5801:8e02::1'
+# but i dont want ipv6 dns, just keep it simple to ipv4.
+uset dhcp.@odhcpd[0].dns 10.2.0.1
+
# disabled for now. i want to selectively enable it
# for specific hosts.
# to start.
mkdir -p /mnt/usb/tftpboot
v cedit /etc/dnsmasq.conf <<EOF || dnsmasq_restart=true
-server=/dmarctest.b8.nz/#
-server=/_domainkey.b8.nz/#
-server=/_dmarc.b8.nz/#
-server=/ns1.b8.nz/#
-server=/ns2.b8.nz/#
-server=/bk.b8.nz/#
-server=/je.b8.nz/#
-mx-host=b8.nz,mail.iankelling.org,10
-txt-record=b8.nz,"v=spf1 a ?all"
-
+# no dns
+port=0
+server=/b8.nz/#
+ptr-record=1.0.2.10.in-addr.arpa.,cmc.b8.nz
# https://ret2got.wordpress.com/2018/01/19/how-your-ethereum-can-be-stolen-using-dns-rebinding/
stop-dns-rebind
+rebind-domain-ok=b8.nz
# this says the ip of default gateway and dns server,
# but I think they are unneded and default
# download namebench and run it like this:
# for x in all regional isp global preferred nearby; do ./namebench.py -s \$x -c US -i firefox -m weighted -J 10 -w; echo \$x; hr; done
# google
-server=8.8.4.4
-server=8.8.8.8
-server=2001:4860:4860::8888
-server=2001:4860:4860::8844
+server=1.1.1.3
+server=1.0.0.3
+server=2606:4700:4700::1113
+server=2606:4700:4700::1003
+
+# server=8.8.4.4
+# server=8.8.8.8
+# server=2001:4860:4860::8888
+# server=2001:4860:4860::8844
# to fixup existin ips, on the client you can do
# default dhcp range is 100-150
# bottom port, iPXE (PCI 03:00.0) in seabios boot menu
dhcp-host=c8:60:00:31:6b:75,set:kd,$l.2,kd
+dhcp-host=94:05:bb:1e:2c:2e,set:sy,$l.3,sy
# top port, iPXE (PCI 04:00.0) in seabios boot menu
#dhcp-host=c8:60:00:2b:15:07,set:kd,$l.2,kd
-dhcp-host=00:26:18:97:bb:16,set:frodo,$l.3,frodo
# 4 is reserved for a staticly configured host wrt2
# old x2 with bad fan
#dhcp-host=00:1f:16:16:39:24,set:x2,$l.5,x2
dhcp-host=f0:de:f1:81:ec:88,set:x2,$l.5,x2
dhcp-host=c4:8e:8f:44:f5:63,set:x2w,$l.6,x2w
+dhcp-host=34:7d:f6:ed:ec:07,set:syw,$l.7,syw
+dhcp-host=80:fa:5b:1c:6e:cf,set:amy,$l.8,amy
# This is so fai can have an explicit name to use for testing,
# or else any random machine which did a pxe boot would get
# reformatted. The mac is from doing a virt-install, cancelling it,
# and copying the generated mac, so it should be randomish.
-dhcp-host=fa:08:f8:4c:14:1c,set:tp,$l.7,rp
-dhcp-host=80:fa:5b:1c:6e:cf,set:tp,$l.8,tp
dhcp-host=52:54:00:9c:ef:ad,set:demohost,$l.12,demohost
dhcp-host=62:03:cb:a8:3e:a3,set:trp,$1.13,trp
-dhcp-host=00:1f:16:14:01:d8,set:tp,$l.18,x3
+dhcp-host=00:1f:16:14:01:d8,set:x3,$l.18,x3
# BRN001BA98CA823 in dhcp logs
-dhcp-host=00:1b:a9:8c:a8:23,set:tp,$l.19,brother
-dhcp-host=38:63:bb:07:5a:f9,set:tp,$l.25,hp
+dhcp-host=00:1b:a9:8c:a8:23,set:brother,$l.19,brother
+
+dhcp-host=00:26:b6:f7:d4:d8,set:amyw,$l.23,amyw
+dhcp-host=38:63:bb:07:5a:f9,set:hp,$l.25,hp
dhcp-host=00:26:b6:f6:0f:e9,set:frodow,$l.28,frodow
if $dnsmasq_restart && ! $dev2; then
+ # todo: can our ptr records be put in /etc/hosts?
+ # eg: user normal /etc/hosts records, and they wont be used for A resolution
+ # due to the other settings, but will be used for ptr? then maybe
+ # we dont have to restart dnsmasq for a dns update?
+ #
+ # todo: according to this
+ # https://www.redpill-linpro.com/techblog/2019/08/27/evaluating-local-dnssec-validators.html#toggling-dnssec-validation-1
+ # we should turn on dnssec validation when wrt gets version > 2.80. currently at 2.80.
+ # todo: download https://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/dnsmasq-full_2.84-1_mipsel_24kc.ipk
+ # and install it. then we can turn off dnssec in systemd-resolved
+ #
+ # Also, reload of dnsmasq seems to break things, wifi
+ # clients were not getting internet connectivity.
v /etc/init.d/dnsmasq restart
fi
iankelling.org / git / automated-distro-installer / blobdiff