# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
set -eE -o pipefail
trap 'echo "$0:$LINENO:error: \"$BASH_COMMAND\" returned $?" >&2' ERR
usage() {
cat <<EOF
-usage: ${0##*/} [-h] [-t 2|3|test] [-m WIRELESS_MAC]
+usage: ${0##*/} [-h] [-t 2|3|test|client] [-m WIRELESS_MAC]
setup my router in general: dhcp, dns, etc.
Type 2 or 3 is for setting up a backup device, there are two kinds so
that you can switch the main device to a backup, then a backup to the
main. Type test is for setting up a testing device.
-Passing an empty string for WIRELESS_MAC will cause the device's native
-mac to be used.
+Passing an empty string for WIRELESS_MAC, or if none is defined in the
+secrets file, will cause the device's native mac to be used.
EOF
-dnsmasq_restart=false
-firewall_restart=false
-dev2=false
-test=false
-libremanage_host=wrt2
secrets=false
if [[ -e /root/router-secrets ]]; then
: ${hostname:=wrt}
+dnsmasq_restart=false
+firewall_restart=false
+dev2=false
+test=false
+client=false
+libremanage_host=wrt2
lanip=1
while getopts hm:t: opt; do
case $opt in
test)
test=true
;;
+ client)
+ client=true
+ ;;
*) echo "$0: unexpected arg to -t: $*" >&2; usage 1 ;;
esac
;;
lan=10.1.0.0
elif [[ $hostname == cmc ]]; then
lan=10.2.0.0
+elif $client; then
+ lan=10.3.0.0
fi
if $test; then
uset network.lan.ipaddr $l.$lanip
uset network.lan.netmask $mask
-if $dev2; then
- uset network.lan.gateway $l.1
- uset network.wan.proto none
- uset network.wan6.proto none
+if $dev2 || $client; then
+ if $dev2; then
+ uset network.lan.gateway $l.1
+ uset network.wan.proto none
+ uset network.wan6.proto none
+ fi
/etc/init.d/dnsmasq stop
/etc/init.d/dnsmasq disable
/etc/init.d/odhcpd stop
fi
wireless_restart=false
-for x in 0 1; do
- uset wireless.default_radio$x.ssid "$ssid"
- uset wireless.default_radio$x.key $key
- uset wireless.default_radio$x.encryption psk2
- if [[ $mac ]]; then
- uset wireless.default_radio$x.macaddr $macpre$((macsuf + 2*x))
- fi
- # secondary device has wireless disabled
- uset wireless.radio$x.disabled $dev2
-done
-if $wireless_restart; then
- v wifi
+if $client; then
+ uset wireless.default_radio0.network 'wwan'
+ uset wireless.default_radio0.ssid ${rclientssid[$rmac]}
+ uset wireless.default_radio0.encryption 'psk2'
+ uset wireless.default_radio0.device 'radio0'
+ uset wireless.default_radio0.mode 'sta'
+ uset wireless.default_radio0.bssid ${rclientbssid[$rmac]}
+ # todo: look into whether 5g network is available.
+ uset wireless.default_radio0.key ${rclientkey[$rmac]}
+ uset wireless.radio0.disabled false
+ uset wireless.radio1.disabled true
+else
+ # defaults, just reseting in case client config ran
+ uset wireless.default_radio0.network lan
+ uset wireless.default_radio0.mode ap
+ for x in 0 1; do
+ uset wireless.default_radio$x.ssid "$ssid"
+ uset wireless.default_radio$x.key $key
+ uset wireless.default_radio$x.encryption psk2
+ if [[ $mac ]]; then
+ uset wireless.default_radio$x.macaddr $macpre$((macsuf + 2*x))
+ fi
+ # secondary device has wireless disabled
+ uset wireless.radio$x.disabled $dev2
+ done
fi
+
+
# usb, screen, relay are for libremanage
# rsync is for brc
+#
+# relay package temporarily disabled
+# /root/relay_1.0-1_mips_24kc.ipk
v pi kmod-usb-storage block-mount kmod-fs-ext4 nfs-kernel-server \
- tcpdump openvpn-openssl adblock libusb-compat /root/relay_1.0-1_mips_24kc.ipk \
+ tcpdump openvpn-openssl adblock libusb-compat \
screen kmod-usb-serial-cp210x kmod-usb-serial-ftdi rsync
cat >/etc/libremanage.conf <<EOF
wgip6=fdfd::1/64
wgport=26000
+network_restart=false
+if $client; then
+ v cedit wific /etc/config/network <<EOF || network_restart=true
+# https://openwrt.org/docs/guide-user/network/wifi/connect_client_wifi
+config interface 'wwan'
+ option proto 'dhcp'
+EOF
+fi
-v cedit /etc/config/network <<EOF || v /etc/init.d/network reload
+v cedit /etc/config/network <<EOF || network_restart=true
config 'route' 'transmission'
option 'interface' 'lan'
option 'target' '10.173.0.0'
list allowed_ips 'fdfd::2/64'
EOF
-
+if $network_restart; then
+ v /etc/init.d/network reload
+fi
firewall-cedit() {
+
+ if $client; then
+ v cedit wific /etc/config/firewall <<EOF
+config zone
+ option name wwan
+ option input REJECT
+ option output ACCEPT
+ option forward REJECT
+ option masq 1
+ option mtu_fix 1
+ option network wwan
+EOF
+ fi
+
case $hostname in
wrt)
v cedit host /etc/config/firewall <<EOF
option src wan
option src_dport 2202
option dest_port 22
- option dest_ip $l.8
+ option dest_ip $l.2
option dest lan
config rule
option src wan
option target ACCEPT
option dest_port 2208
+config redirect
+ option name sshbb8
+ option src wan
+ option src_dport 2209
+ option dest_port 22
+ option dest_ip $l.9
+ option dest lan
+config rule
+ option src wan
+ option target ACCEPT
+ option dest_port 2209
+
config redirect
option name icecast
option src wan
config redirect
- option name vpntp
- option src wan
- option src_dport 1196
- option dest lan
- option dest_ip $l.8
- option proto udp
-config rule
- option src wan
- option target ACCEPT
- option dest_port 1196
- option proto udp
-
-
-config redirect
- option name httptp
+ option name httpkd
option src wan
option src_dport 80
option dest lan
- option dest_ip $l.8
+ option dest_ip $l.2
option proto tcp
config rule
option src wan
option proto tcp
config redirect
- option name httpstp
+ option name httpskd
option src wan
option src_dport 443
option dest lan
- option dest_ip $l.8
+ option dest_ip $l.2
option proto tcp
config rule
option src wan
}
firewall-cedit || firewall_restart=true
-if ! uci get firewall.@zone[1].network | grep wg0 &>/dev/null; then
- # cant mix cedit plus uci
- echo | cedit /etc/config/firewall ||:
- uci add_list firewall.@zone[1].network=wg0
- uci commit firewall
- firewall-cedit ||:
- firewall_restart=true
-fi
+# not using wireguard for now
+# if ! uci get firewall.@zone[1].network | grep wg0 &>/dev/null; then
+# # cant mix cedit plus uci
+# echo | cedit /etc/config/firewall ||:
+# uci add_list firewall.@zone[1].network=wg0
+# uci commit firewall
+# firewall-cedit ||:
+# firewall_restart=true
+# fi
v cedit /etc/hosts <<EOF || dnsmasq_restart=true
127.0.1.1 $hostname
-#$l.7 x3
-$l.12 demohost
-$l.13 trp
-72.14.176.105 li
-2600:3c00::f03c:91ff:fe6d:baf8 li
-
-# netns creation looks for next free subnet starting at 10.173, but I only
-# use one, and I would keep this one as the first created.
-10.173.0.2 transmission
EOF
+# not sure this case statement is needed
case $hostname in
cmc)
v cedit host /etc/hosts <<EOF || dnsmasq_restart=true
-$l.1 $hostname b8.nz
-$l.2 kd
-#$l.3 frodo
-$l.4 wrt2
-$l.5 x2 faiserver
-$l.6 x2w
-$l.7 rp
-$l.8 tp
-$l.9 bb8
-$l.14 wrt3
-#$l.18 x3
-$l.19 brother
-#$l.28 frodow
+$l.1 $hostname
EOF
;;
esac
uset dhcp.@dnsmasq[0].domain b8.nz
-uset dhcp.@dnsmasq[0].local /b8.nz/
uset system.@system[0].hostname $hostname
+uset dhcp.@dnsmasq[0].local
+
# uci doesnt seem to have a way to set an empty value,
# if you delete it, it goes back to the default. this seems
# to be a decent workaround.
# to start.
mkdir -p /mnt/usb/tftpboot
v cedit /etc/dnsmasq.conf <<EOF || dnsmasq_restart=true
-server=/dmarctest.b8.nz/#
-server=/_domainkey.b8.nz/#
-server=/_dmarc.b8.nz/#
-server=/ns1.b8.nz/#
-server=/ns2.b8.nz/#
-server=/bk.b8.nz/#
-server=/je.b8.nz/#
-mx-host=b8.nz,mail.iankelling.org,10
-txt-record=b8.nz,"v=spf1 a ?all"
-
+server=/b8.nz/#
+ptr-record=1.0.2.10.in-addr.arpa.,cmc.b8.nz
+ptr-record=2.0.2.10.in-addr.arpa.,kd.b8.nz
+ptr-record=3.0.2.10.in-addr.arpa.,sy.b8.nz
+ptr-record=4.0.2.10.in-addr.arpa.,wrt2.b8.nz
+ptr-record=5.0.2.10.in-addr.arpa.,x2.b8.nz
+ptr-record=6.0.2.10.in-addr.arpa.,xw2.b8.nz
+ptr-record=7.0.2.10.in-addr.arpa.,syw.b8.nz
+ptr-record=8.0.2.10.in-addr.arpa.,tp.b8.nz
+ptr-record=9.0.2.10.in-addr.arpa.,bb8.b8.nz
+ptr-record=12.0.2.10.in-addr.arpa.,demohost.b8.nz
+ptr-record=14.0.2.10.in-addr.arpa.,wrt3.b8.nz
+ptr-record=19.0.2.10.in-addr.arpa.,brother.b8.nz
+ptr-record=25.0.2.10.in-addr.arpa.,hp.b8.nz
+ptr-record=.0.2.10.in-addr.arpa.,transmission.b8.nz
# https://ret2got.wordpress.com/2018/01/19/how-your-ethereum-can-be-stolen-using-dns-rebinding/
stop-dns-rebind
+rebind-domain-ok=b8.nz
# this says the ip of default gateway and dns server,
# but I think they are unneded and default
# default dhcp range is 100-150
# bottom port, iPXE (PCI 03:00.0) in seabios boot menu
dhcp-host=c8:60:00:31:6b:75,set:kd,$l.2,kd
+dhcp-host=94:05:bb:1e:2c:2e,set:sy,$l.3,sy
# top port, iPXE (PCI 04:00.0) in seabios boot menu
#dhcp-host=c8:60:00:2b:15:07,set:kd,$l.2,kd
-dhcp-host=00:26:18:97:bb:16,set:frodo,$l.3,frodo
# 4 is reserved for a staticly configured host wrt2
# old x2 with bad fan
#dhcp-host=00:1f:16:16:39:24,set:x2,$l.5,x2
dhcp-host=f0:de:f1:81:ec:88,set:x2,$l.5,x2
dhcp-host=c4:8e:8f:44:f5:63,set:x2w,$l.6,x2w
+dhcp-host=34:7d:f6:ed:ec:07,set:syw,$l.7,syw
+dhcp-host=80:fa:5b:1c:6e:cf,set:tp,$l.8,tp
# This is so fai can have an explicit name to use for testing,
# or else any random machine which did a pxe boot would get
# reformatted. The mac is from doing a virt-install, cancelling it,
# and copying the generated mac, so it should be randomish.
-dhcp-host=fa:08:f8:4c:14:1c,set:tp,$l.7,rp
-dhcp-host=80:fa:5b:1c:6e:cf,set:tp,$l.8,tp
dhcp-host=52:54:00:9c:ef:ad,set:demohost,$l.12,demohost
dhcp-host=62:03:cb:a8:3e:a3,set:trp,$1.13,trp
-dhcp-host=00:1f:16:14:01:d8,set:tp,$l.18,x3
+dhcp-host=00:1f:16:14:01:d8,set:x3,$l.18,x3
# BRN001BA98CA823 in dhcp logs
-dhcp-host=00:1b:a9:8c:a8:23,set:tp,$l.19,brother
+dhcp-host=00:1b:a9:8c:a8:23,set:brother,$l.19,brother
+dhcp-host=38:63:bb:07:5a:f9,set:hp,$l.25,hp
dhcp-host=00:26:b6:f6:0f:e9,set:frodow,$l.28,frodow
+dhcp-host=00:26:18:97:bb:16,set:frodo,$l.29,frodo
# faiserver vm
EOF
-
-
if $dnsmasq_restart && ! $dev2; then
+ # todo: can our ptr records be put in /etc/hosts?
+ # eg: user normal /etc/hosts records, and they wont be used for A resolution
+ # due to the other settings, but will be used for ptr? then maybe
+ # we dont have to restart dnsmasq for a dns update?
+ #
+ # todo: according to this
+ # https://www.redpill-linpro.com/techblog/2019/08/27/evaluating-local-dnssec-validators.html#toggling-dnssec-validation-1
+ # we should turn on dnssec validation when wrt gets version > 2.80. currently at 2.80.
+ # todo: download https://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/dnsmasq-full_2.84-1_mipsel_24kc.ipk
+ # and install it. then we can turn off dnssec in systemd-resolved
+ #
+ # Also, reload of dnsmasq seems to break things, wifi
+ # clients were not getting internet connectivity.
v /etc/init.d/dnsmasq restart
fi
v /etc/init.d/firewall restart
fi
+# this may just restart the network and take care of the network_restart below.
+if $wireless_restart; then
+ v wifi
+fi
# todo: we should catch errors and still run this if needed
if $network_restart; then
iankelling.org / git / automated-distro-installer / blobdiff