# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+PS4='+ $LINENO '
set -eE -o pipefail
trap 'echo "$0:$LINENO:error: \"$BASH_COMMAND\" returned $?" >&2' ERR
-# for calling outside of FAI, first
-# - source /a/bin/fai-wrapper
+if [[ $EUID != 0 ]]; then
+ echo "$0: error: need to run as root" >&2
+ exit 1
+fi
+
+# for calling outside of FAI:
+# fai-redep
+# s
+# source /b/fai/fai-wrapper
# - set any appropriate classes with: fai-setclass OPT1... which sets CLASS_OPT1=true...
# or run eval-fai-classfile FILE
+# export luks_dir=/q/root/luks
#
# OPTIONS:
#
# REPARTITION: forces repartitioning even if we detect the proper amount
# of partitions already exist.
#
+# NOWIPE: use existing subvolumes if they exist
+#
# ROTATIONAL: forces to install onto hdds instead of sdds. normally sdds
# are chosen if they exist.
#
if ! type -p devbyid; then
for d in $FAI/distro-install-common \
- /a/bin/fai/fai/config/distro-install-common $FAI $PWD; do
+ /a/bin/fai/fai/config/distro-install-common $FAI $PWD; do
[[ -d $d ]] || continue
if [[ -e $d/devbyid ]]; then
devbyid=$d/devbyid
##### end function defs
-if ifclass REPARTITION;then
+if ifclass REPARTITION; then
partition=true # force a full wipe
else
partition=false # change to true to force a full wipe
fi
+if ifclass NOWIPE; then
+ wipe=false
+else
+ wipe=true
+fi
-## ignore disks that are mounted, eg when running from fai-cd
-declare -A disk_excludes
-while read -r l; do
- eval "$l"
- if [[ ! $PKNAME ]]; then
- PKNAME="$KNAME"
- fi
- if [[ $MOUNTPOINT ]]; then
- disk_excludes[$PKNAME]=true
- fi
-done < <(lsblk -nP -o KNAME,MOUNTPOINT,PKNAME)
+if ((`nproc` > 2)); then
+ mopts=,compress=zstd
+fi
+declare -A disk_excludes
+if ! ifclass USE_MOUNTED; then
+ ## ignore disks that are mounted, eg when running from fai-cd
+ while read -r l; do
+ eval "$l"
+ if [[ ! $PKNAME ]]; then
+ PKNAME="$KNAME"
+ fi
+ if [[ $MOUNTPOINT ]]; then
+ disk_excludes[$PKNAME]=true
+ fi
+ done < <(lsblk -nP -o KNAME,MOUNTPOINT,PKNAME)
+fi
hdds=()
ssds=()
fi
done
+even_raid=false
if ifclass RAID0 || (( ${#boot_devs[@]} == 1 )); then
raid_level=0
elif ifclass RAID1 || (( ${#boot_devs[@]} <= 3 )); then
+ if (( ${#boot_devs[@]} == 2 )); then
+ even_raid=true
+ fi
raid_level=1
else
raid_level=10
if [[ ! $DISTRO ]]; then
- if ifclass VOL_STRETCH_BOOTSTRAP; then
- DISTRO=debianstretch_bootstrap
+ if ifclass VOL_BUSTER_BOOTSTRAP; then
+ DISTRO=debianbuster_bootstrap
elif ifclass VOL_STRETCH; then
DISTRO=debianstretch
elif ifclass VOL_BUSTER; then
DISTRO=debianbuster
+ elif ifclass VOL_BULLSEYE; then
+ DISTRO=debianbullseye
elif ifclass VOL_TESTING; then
DISTRO=debiantesting
elif ifclass VOL_XENIAL; then
DISTRO=ubuntuxenial
- elif ifclass VOL_BELENOS; then
- DISTRO=trisquelbelenos
+ elif ifclass VOL_BIONIC; then
+ DISTRO=ubuntubionic
+ elif ifclass VOL_FOCAL; then
+ DISTRO=ubuntufocal
elif ifclass VOL_FLIDAS; then
DISTRO=trisquelflidas
elif ifclass VOL_ETIONA; then
DISTRO=trisqueletiona
+ elif ifclass VOL_NABIA; then
+ DISTRO=trisquelnabia
else
echo "PARTITIONER ERROR: no distro class/var set" >&2
exit 1
}
-# see README for docs about how to create these
-luks_dir=${LUKS_DIR:-/var/lib/fai/config/distro-install-common/luks}
-
+if [[ ! $luks_dir ]]; then
+ # see README for docs about how to create these
+ luks_dir=$FAI/distro-install-common/luks
+fi
luks_file=$luks_dir/host-$HOSTNAME
if [[ ! -e $luks_file ]]; then
fi
# # note, corresponding changes in /b/ds/keyscript-{on,off}
-if ifclass tpnew; then
- lukspw=$(cat $luks_dir/traci)
-elif ifclass ziva; then
- lukspw=$(cat $luks_dir/ziva)
-elif ifclass demohost; then
+if ifclass demohost; then
lukspw=x
elif [[ -e $luks_dir/$HOSTNAME ]]; then
lukspw=$(cat $luks_dir/$HOSTNAME)
fi
### end wipefs
+
+ if $even_raid; then
+ for dev in ${devs[@]}; do
+ disk_mib=$(( $(parted -m $dev unit MiB print | \
+ sed -nr "s#^/dev/[^:]+:([0-9]+).*#\1#p") - 1))
+ if [[ ! min_disk_mib ]] || (( disk_mib < min_disk_mib )); then
+ min_disk_mib=$disk_mib
+ fi
+ done
+ fi
+
for dev in ${devs[@]}; do
if [[ $SPECIAL_DISK ]]; then
dev=$(devbyid $SPECIAL_DISK)
#
# Note: parted print error output is expected. example:
# Error: /dev/vda: unrecognised disk label
- disk_mib=$(( $(parted -m $dev unit MiB print | \
- sed -nr "s#^/dev/[^:]+:([0-9]+).*#\1#p") - 1))
+ if $even_raid; then
+ disk_mib=$min_disk_mib
+ else
+ disk_mib=$(( $(parted -m $dev unit MiB print | \
+ sed -nr "s#^/dev/[^:]+:([0-9]+).*#\1#p") - 1))
+ fi
root_end=$(( disk_mib - swap_mib - boot_mib / ${#boot_devs[@]} ))
swap_end=$(( root_end + swap_mib))
# This is just a bit more robust, and it could work for booting
# into ipxe which can't persist data, if we ever got that working.
mkfs.ext2 $(grub_extdev)
- # when we move to newer than trisquel 8, we can remove
+ # when we move to newer than trisquel 9, we can remove
# --type luks1. We can also check on cryptsetup --help | less /compil
# to see about the other settings. Default in debian 9 is luks2.
# You can convert from luks2 to luks 1 by adding a temporary key:
bpart ${boot_devs[@]}
else
for dev in ${devs[@]}; do
- mkfs.ext2 $(grub_extdev)
+ if [[ -e /dev/mapper/$(root-cryptname) ]]; then
+ continue
+ fi
cryptsetup luksOpen $(rootdev) $(root-cryptname) \
--key-file $luks_file
done
fi
-if [[ $DISTRO != debianstretch_bootstrap ]]; then
+if $wipe && [[ $DISTRO != debianbuster_bootstrap ]]; then
# bootstrap distro doesn't use separate encrypted root.
mount -o subvolid=0 $first_root_crypt /mnt
# systemd creates subvolumes we want to delete.
btrfs subvolume create root_$DISTRO
- mkdir -p /mnt/root_$DISTRO/boot
# could set default subvol like this, but no reason to.
# btrfs subvolume set-default \
# $(btrfs subvolume list . | grep "root_$DISTRO$" | awk '{print $2}') .
mkdir -p /mnt/grub2
cp $FAI/distro-install-common/libreboot_grub.cfg /mnt/grub2
-if [[ $DISTRO == debianstretch_bootstrap ]]; then
+if [[ $DISTRO == debianbuster_bootstrap ]]; then
# this is just convenience for the libreboot_grub config
# so we can glob the other ones easier.
boot_vol=$DISTRO
else
boot_vol=boot_$DISTRO
fi
-[[ ! -e /mnt/$boot_vol ]] || btrfs subvolume delete /mnt/$boot_vol
-btrfs subvolume create $boot_vol
+if $wipe && [[ -e /mnt/$boot_vol ]]; then
+ btrfs subvolume delete /mnt/$boot_vol
+fi
+if [[ ! -e /mnt/$boot_vol ]]; then
+ btrfs subvolume create $boot_vol
+fi
cd /
umount /mnt
## end create subvols ##
grub-editenv /mnt/grubenv set last_boot=/$boot_vol
umount /mnt
-if [[ $DISTRO == debianstretch_bootstrap ]]; then
+if [[ $DISTRO == debianbuster_bootstrap ]]; then
cat > /tmp/fai/fstab <<EOF
$first_boot_dev / btrfs noatime,subvol=$boot_vol 0 0
EOF
else
# note, fai creates the mountpoints listed here
cat > /tmp/fai/fstab <<EOF
-$first_root_crypt / btrfs noatime,subvol=root_$DISTRO 0 0
-$first_root_crypt /mnt/root btrfs nofail,noatime,subvolid=0 0 0
-$first_boot_dev /boot btrfs nofail,noatime,subvol=$boot_vol 0 0
+$first_root_crypt / btrfs noatime,subvol=root_$DISTRO$mopts 0 0
+$first_root_crypt /mnt/root btrfs nofail,noatime,subvolid=0$mopts 0 0
+$first_boot_dev /boot btrfs nofail,noatime,subvol=$boot_vol 0 0
+$first_boot_dev /mnt/boot btrfs nofail,noatime,subvolid=0 0 0
EOF
swaps=()
+ rm -f /tmp/fai/crypttab
for dev in ${devs[@]}; do
swaps+=($(swap-cryptname))
cat >>/tmp/fai/crypttab <<EOF
-$(root-cryptname) $(rootdev) none keyscript=decrypt_keyctl,discard,luks,initramfs
+$(root-cryptname) $(rootdev) none keyscript=/root/keyscript,discard,luks,initramfs
$(swap-cryptname) $(swapdev) /dev/urandom swap,cipher=aes-xts-plain64,size=256,hash=ripemd160
EOF
cat >> /tmp/fai/fstab <<EOF