various fixes, upgrade nfsroot to buster

[automated-distro-installer] / fai / config / hooks / partition.DEFAULT

diff --git a/fai/config/hooks/partition.DEFAULT b/fai/config/hooks/partition.DEFAULT
index 2905435b752b89d6b5a7696f1b680ab62f1a658a..b961e62ed2d7f98055204bfd1b0bd42066960fa8 100755 (executable)
--- a/fai/config/hooks/partition.DEFAULT
+++ b/fai/config/hooks/partition.DEFAULT
@@ -18,8 +18,11 @@
 set -eE -o pipefail
 trap 'echo "$0:$LINENO:error: \"$BASH_COMMAND\" returned $?" >&2' ERR
 
-# for calling outside of FAI, first
-# - source /a/bin/fai-wrapper
+# for calling outside of FAI:
+# # need to redep and set that location so that we get luks keys
+# export FAI=/srv/fai/config
+# fai-redep
+# source /b/fai/fai-wrapper
 # - set any appropriate classes with: fai-setclass OPT1... which sets CLASS_OPT1=true...
 #   or run eval-fai-classfile FILE
 #
@@ -93,10 +96,7 @@ grub_extn=4
 # https://wiki.archlinux.org/index.php/GRUB
 bios_grubn=5
 lastn=$bios_grubn
-# this is larger than needed for several /boot subvols,
-# becuase I keep a minimal debian install on it, for
-# recovery needs, and for doing pxe-kexec.
-boot_mib=10000
+
 
 
 ##### end configuration
@@ -212,7 +212,7 @@ if [[ ! ${devs[0]} ]]; then
   exit 1
 fi
 
-
+boot_space=0
 first=false
 boot_devs=()
 for dev in ${devs[@]}; do
@@ -242,6 +242,8 @@ for dev in ${devs[@]}; do
     done
     $bad_disk || boot_devs+=($(bootdev))
   else
+    boot_space=$(( boot_space + $(parted -m $dev unit MiB print | \
+                                    sed -nr "s#^/dev/[^:]+:([0-9]+).*#\1#p") - 1))
     boot_devs+=($(bootdev))
   fi
   if [[ $boot_devs && $first ]]; then
@@ -256,11 +258,32 @@ elif ifclass RAID1 || (( ${#boot_devs[@]} <= 3 )); then
   raid_level=1
 else
   raid_level=10
-  # need double the space if we are raid 10, and then
-  # might as well give some extra.
-  boot_mib=$((boot_mib * 3))
 fi
 
+### Begin calculate boot partition space
+# due to raid duplication
+case $raid_level in
+  1*) boot_space=$(( boot_space / 2 )) ;;
+esac
+if (( boot_space > 60000 )); then
+  # this is larger than needed for several /boot subvols,
+  # becuase I keep a minimal debian install on it for
+  # recovery needs and for doing pxe-kexec.
+  boot_mib=10000
+elif (( boot_space > 30000 )); then
+  boot_mib=$(( 5000 + (boot_space - 30000) / 2 ))
+else
+  # Small vms don't have room for /boot recovery.  With 3 kernels
+  # installed, i'm using 132M on t8, so this seems like plenty of
+  # room. note: rhel 8 recomments 1g for /boot.
+  boot_mib=500
+  #
+fi
+case $raid_level in
+  1*) boot_mib=$(( boot_mib * 2 )) ;;
+esac
+### end calculate boot partition space
+
 
 
 if [[ ! $DISTRO ]]; then
@@ -297,9 +320,8 @@ bpart() { # btrfs a partition
 }
 
 
-# keyfiles generated like:
-# head -c 2048 /dev/urandom | od | s dd of=/q/root/luks/host-demohost
-luks_dir=${LUKS_DIR:-/var/lib/fai/config/distro-install-common/luks}
+# see README for docs about how to create these
+luks_dir=$FAI/distro-install-common/luks
 
 
 luks_file=$luks_dir/host-$HOSTNAME
@@ -318,12 +340,12 @@ fi
 # # note, corresponding changes in /b/ds/keyscript-{on,off}
 if ifclass tpnew; then
   lukspw=$(cat $luks_dir/traci)
-elif ifclass BUSTER_LINODE; then
-  lukspw=$(cat $luks_dir/li)
 elif ifclass ziva; then
   lukspw=$(cat $luks_dir/ziva)
 elif ifclass demohost; then
   lukspw=x
+elif [[ -e $luks_dir/$HOSTNAME ]]; then
+  lukspw=$(cat $luks_dir/$HOSTNAME)
 else
   lukspw=$(cat $luks_dir/iank)
 fi
@@ -465,7 +487,9 @@ if $partition; then
   bpart ${boot_devs[@]}
 else
   for dev in ${devs[@]}; do
-    mkfs.ext2 $(grub_extdev)
+    if [[ -e /a/bin/fai/fai-wrapper && -e /dev/mapper/$(root-cryptname) ]]; then
+      continue
+    fi
     cryptsetup luksOpen $(rootdev) $(root-cryptname) \
                --key-file $luks_file
   done
@@ -488,7 +512,6 @@ if [[ $DISTRO != debianstretch_bootstrap ]]; then
 
   btrfs subvolume create root_$DISTRO
 
-  mkdir -p /mnt/root_$DISTRO/boot
   # could set default subvol like this, but no reason to.
   # btrfs subvolume set-default \
     #       $(btrfs subvolume list . | grep "root_$DISTRO$" | awk '{print $2}') .
@@ -541,19 +564,20 @@ EOF
 else
   # note, fai creates the mountpoints listed here
   cat > /tmp/fai/fstab <<EOF
-$first_root_crypt  /  btrfs  noatime,subvol=root_$DISTRO  0 0
-$first_root_crypt  /mnt/root  btrfs  noatime,subvolid=0  0 0
-$first_boot_dev  /boot  btrfs  noatime,subvol=$boot_vol  0 0
+$first_root_crypt  /  btrfs          noatime,subvol=root_$DISTRO  0 0
+$first_root_crypt  /mnt/root  btrfs  nofail,noatime,subvolid=0  0 0
+$first_boot_dev  /boot  btrfs        nofail,noatime,subvol=$boot_vol  0 0
+$first_boot_dev  /mnt/boot  btrfs    nofail,noatime,subvolid=0  0 0
 EOF
   swaps=()
   for dev in ${devs[@]}; do
     swaps+=($(swap-cryptname))
     cat >>/tmp/fai/crypttab <<EOF
-$(root-cryptname)  $(rootdev)  none  keyscript=decrypt_keyctl,discard,luks,initramfs
+$(root-cryptname)  $(rootdev)  none  keyscript=/root/keyscript,discard,luks,initramfs
 $(swap-cryptname) $(swapdev)  /dev/urandom  swap,cipher=aes-xts-plain64,size=256,hash=ripemd160
 EOF
     cat >> /tmp/fai/fstab <<EOF
-$(swap-cryptdev)  none  swap  sw  0 0
+$(swap-cryptdev)  none  swap  nofail,sw  0 0
 EOF
   done