# With X suffix, means it has gone through the dirinstall process and has eXtra
# things installed, to speed up installation.
#
-# STRETCH64, BUSTER64, BULLSEYE64,
-# FLIDAS64, FLIDAS64BIG, ETIONA64, NABIA64
+# STRETCH64, BUSTER64, BULLSEYE64, BOOKWORM64
+# FLIDAS64, FLIDAS64BIG, ETIONA64, NABIA64, ARAMO64
# XENIAL64, BIONIC64, FOCAL64,
#
# The distro subvol name, we can add as many of these as we want:
-# VOL_TESTING, VOL_STRETCH, VOL_BUSTER, VOL_BULLSEYE,
-# VOL_FLIDAS, VOL_ETIONA, VOL_NABIA
+# VOL_TESTING, VOL_STRETCH, VOL_BUSTER, VOL_BULLSEYE, VOL_BOOKWORM
+# VOL_FLIDAS, VOL_ETIONA, VOL_NABIA, VOL_ARAMO
# VOL_XENIAL, VOL_BIONIC VOL_FOCAL
# VOL_BUSTER_BOOTSTRAP.
# Using VOL_BUSTER_BOOTSTRAP sets up the install to act like a pxe rom if
# grub sets a specific var.
#
# The apt sources files we want,
-# STRETCH_FREE, STRETCH_NONFREE,
+# STRETCH_FREE, STRETCH_NONFREE, STRETCH_LINODE
# BUSTER_FREE, BUSTER_NONFREE,
# BULLSEYE_FREE, BULLSEYE_NONFREE
+# BOOKWORM_FREE, BOOKWORM_NONFREE
# TESTING_FREE, TESTING_NONFREE,
-# XENIAL_FREE, BIONIC, FOCAL, FLIDAS, ETIONA, NABIA, STRETCH_LINODE.
+# XENIAL_FREE, BIONIC, FOCAL, FLIDAS, ETIONA, NABIA, ARAMO.
#
# It's all a little redundant in some cases, but it keeps things
# simpler.
# DESKTOP: install a bunch of extra packages. For creating X suffix
# basefiles. See README.
#
-# REPARTITION: we try to reuse partitions/filesystems to install a new
-# os into a multi-os system, if we see some basic hueristics, like the
-# right amount of them. This overrides that.
+# LINODE: For running a vm on linode, especially one created with fai-cd.
#
-# PARTITION_PROMPT: If we don't see partitions to reuuse, prompt
-# to make sure we really want to repartition and use a completely
-# fresh install. I use this in case our repartition check has
-# a bug in it, or I accidentally set REPARTITION.
+# IANK / FSF: general setup of my machine vs FSF machines
+# NABIA_EXTRA: extra repos for NABIA from other distros
+# ARAMO_EXTRA: extra repos for ARAMO from other distros
#
-# ROTATIONAL: in a system with ssd and hdd, install to the hdd
-# instead of the default ssd.
+# UBUNTU_UP: for trisquel, we want to inherit ubuntu things, except for
+# some ubuntu things which go in this class. UP = upstream.
#
-# RAID0: Use raid 0 even if there are >= 4 disks with boot partititions.
+# D16: for kgpe-d16 specific settings.
#
-# LINODE: For running a vm on linode, especially one created with fai-cd.
-
-###### begin Template for 51-multi-boot ######
+# JAMMY_FIRMWARE: for trisquel install to get nonfree firmware from
+# ubuntu jammy. The linux-firmware-free package in trisquel conflicts
+# with the linux-firmware package in ubuntu, but you only find out after
+# installing due to an error.
#
-# It has reasonable combinations of above classes.
-# It's a noop until we replace _ with host names.
-
-#!/bin/bash
-if [[ ! -e /a/bin/fai/fai-wrapper || $FAI_ACTION == dirinstall ]]; then
- case $HOSTNAME in
- # buster based minimal recovery / bootstraping os:
- _) echo BUSTER64 VOL_BUSTER_BOOTSTRAP BUSTER_FREE ;;
- # flidas
- _) echo UBUNTU FLIDAS64 VOL_FLIDAS FLIDAS ;;
- # etiona
- _) echo UBUNTU ETIONA64 VOL_ETIONA ETIONA ;;
- # nabia
- _) echo UBUNTU NABIA64 VOL_NABIA NABIA ;;
- # stretch
- _) echo STRETCH64 VOL_STRETCH STRETCH_FREE ;;
- # buster
- _) echo BUSTER64 VOL_BUSTER BUSTER_FREE ;;
- # testing
- _) echo STRETCH64 VOL_TESTING TESTING_FREE ;;
- # xenial
- _) echo UBUNTU XENIAL64 VOL_XENIAL XENIAL_FREE ;;
- # bionic
- _) echo UBUNTU BIONIC64 VOL_BIONIC BIONIC ;;
- # focal
- _) echo UBUNTU FOCAL64 VOL_FOCAL FOCAL ;;
- esac
-fi
-###### end Template for 51-multi-boot ######
+# For filesystem/partitioning related classes, see comments at the top of
+# fai/config/hooks/partition.DEFAULT
if [[ -e /a/bin/fai/fai-wrapper ]]; then
source /a/bin/distro-functions/src/identify-distros
# if our eth0 mac is in the kvm range, we are a vm.
echo "VM"
fi
+
+exit 0
+### Below here is a comment of code, exit above is so it does not get executed ###
+
+###### begin Template for 51-multi-boot ######
+#
+# It has reasonable combinations of above classes.
+# We must first replace _ with host name(s).
+
+#!/bin/bash
+
+# pick one of these:
+#echo IANK
+#echo FSF
+if [[ ! -e /a/bin/fai/fai-wrapper || $FAI_ACTION == dirinstall ]]; then
+ case $HOSTNAME in
+ # bullseye based minimal recovery / bootstraping os:
+ _) echo BULLSEYE64 VOL_BULLSEYE_BOOTSTRAP BULLSEYE_FREE ;;
+ # flidas
+ _) echo UBUNTU FLIDAS64 VOL_FLIDAS FLIDAS ;;
+ # etiona
+ _) echo UBUNTU ETIONA64 VOL_ETIONA ETIONA ;;
+ # nabia
+ _) echo UBUNTU NABIA64 VOL_NABIA NABIA NABIA_EXTRA ;;
+ # aramo
+ _) echo UBUNTU ARAMO64 VOL_ARAMO ARAMO ARAMO_EXTRA ;;
+ # stretch
+ _) echo STRETCH64 VOL_STRETCH STRETCH_NONFREE ;;
+ # buster
+ _) echo BUSTER64 VOL_BUSTER BUSTER_NONFREE ;;
+ # bullseye
+ _) echo BULLSEYE64 VOL_BULLSEYE BULLSEYE_NONFREE ;;
+ # bookworm
+ _) echo BOOKWORM64 VOL_BOOKWORM BOOKWORM_NONFREE ;;
+ # testing
+ _) echo BOOKWORM64 VOL_TESTING TESTING_NONFREE ;;
+ # xenial
+ _) echo UBUNTU XENIAL64 VOL_XENIAL XENIAL_FREE ;;
+ # bionic
+ _) echo UBUNTU BIONIC64 VOL_BIONIC BIONIC ;;
+ # focal
+ _) echo UBUNTU FOCAL64 VOL_FOCAL FOCAL ;;
+ # jammy
+ _) echo UBUNTU JAMMY64 VOL_JAMMY JAMMY ;;
+ esac
+fi
+###### end Template for 51-multi-boot ######
iankelling.org / git / automated-distro-installer / blobdiff