various fixes

[automated-distro-installer] / README

diff --git a/README b/README
index af4c0ba2ec401a8cf26eae8dc18bdf8bba07aa34..f77aa11235945efd4c4c26610eaf1f2eee41c17e 100644 (file)
--- a/README
+++ b/README
@@ -1,4 +1,4 @@
-Multi-boot/distro btrfs provisioning
+PXE install w multi-boot, btrfs & Libreboot support

 
 Some things are specific to my home network, and uses files with secrets
 that are not in this repo. Uses pxe or pxe-kexec (on libreboot, I have
 
 Some things are specific to my home network, and uses files with secrets
 that are not in this repo. Uses pxe or pxe-kexec (on libreboot, I have


@@ -6,26 +6,25 @@ not added a pxe rom, I use a minimal debian stable subvolume which acts
 like a pxe rom). I use this for bare metal and vms, and two scripts
 which can run post boot so I use them on vps distributed image as well.
 
 like a pxe rom). I use this for bare metal and vms, and two scripts
 which can run post boot so I use them on vps distributed image as well.
 

-Features people may find useful: installs encrypted trisquel belanos, ,
-debian jessie, debian stretch, ubuntu 16.04, and arch (havne't done
-recently, probably a bit broken), in a multi-boot setup using multiple
-subvolumes of a single btrfs filesystem.  Utilizes multiple disks, with
-scripts to automatically decrypt on intentional reboots, but not after
-shutdown or power loss.
+Features people may find useful: installs encrypted trisquel, debian,
+ubuntu, and arch (havne't done recently, probably a bit broken), in a
+multi-boot setup using multiple subvolumes of a single btrfs filesystem.
+Utilizes multiple disks, with scripts to automatically decrypt on
+intentional reboots, but not after shutdown or power loss.

 
 The partititioning and filesystem script is at
 
 The partititioning and filesystem script is at

-fai/config/hooks/partition.DEFAULT. Other debian based distros at least
-as new as ubuntu 14.04 should work fine, and I'm planning to add Fedora
-support. Disks are grouped as ssd or hdd and raided in raid 1 or raid 0
-per configuration. The base partitions are divided into boot, swap, and
-root, (only boot is unencrypted). There are scripts to resize those
-partitions post-provision and while the system is running.
+fai/config/hooks/partition.DEFAULT. Disks are grouped as ssd or hdd and
+raided in raid 1 or raid 0 per configuration. The base partitions are
+divided into boot, swap, and root, (only boot is unencrypted). There are
+scripts to resize those partitions post-provision and while the system
+is running.

 
 People who use fai may find these things as useful examples: it uses
 dnsmasq (on a openwrt machine) for dhcp instead of the isc
 dhcp. fai-wrapper is a small script to use basic fai classes outside of
 fai. It does not use the fai partitioning tool, but the script is
 
 People who use fai may find these things as useful examples: it uses
 dnsmasq (on a openwrt machine) for dhcp instead of the isc
 dhcp. fai-wrapper is a small script to use basic fai classes outside of
 fai. It does not use the fai partitioning tool, but the script is

-inspired from it and works outside of fai.
+inspired from it and works outside of fai. It supports running a fai
+server on debian within android via Maru.

 
 It also automates configuration of an openwrt router after manual
 initial installation.
 
 It also automates configuration of an openwrt router after manual
 initial installation.


@@ -54,19 +53,23 @@ fai-redep # Deploy fai configuration to host "faiserver"
 faiserver-revm # using pxe & preseed, create a vm which is a fai server
 faiserver-uninstall # uninstall fai-server
 faiserver-setup # install fai-server on the current machine
 faiserver-revm # using pxe & preseed, create a vm which is a fai server
 faiserver-uninstall # uninstall fai-server
 faiserver-setup # install fai-server on the current machine

-myfai-chboot # setup fai server for kexec, for use instead of "pxe-server"
-pxe-server # disable/enable fai or arch pxe boot server
+myfai-chboot # setup fai tftp and nfs. useful for doing pxe-kexec
+pxe-server # disable/enable pxe dhcp, tfp, and nfs. calls myfai-chboot

 wrt-setup-remote  # setup my router in general: dhcp, dns, etc.
 
 
 wrt-setup-remote  # setup my router in general: dhcp, dns, etc.
 
 

-# Scripts to do a distro install
+# Script to do a distro install

 
 

-arch-init-remote # install arch after it's been booted into it's setup env

 dsfull # install & post-install a new fai distro
 dsfull # install & post-install a new fai distro

-fai-kexec # kexec to fai tftp server that pxe would normally point to
+arch-init-remote # install arch after it's been booted into it's setup env
+fai-kexec # Kexec this or a remote machine using host faiserver
+live-kexec # fai kexec from upstream live cds, e.g. curl live-kexec|bash
+
+
+# Test scripts
+

 arch-revm # test arch install on a fresh vm
 fai-revm  # test fai install on a fresh vm
 arch-revm # test arch install on a fresh vm
 fai-revm  # test fai install on a fresh vm

-live-kexec # fai kexec from upstream live cds, e.g. curl live-kexec|bash

 
 
 # Scripts to call after a distro install for various reasons
 
 
 # Scripts to call after a distro install for various reasons


@@ -75,11 +78,59 @@ chboot # Set grub to boot into a different distro (installed earlier)
 install-chboot # reinstall chboot to /boot subvols, for chboot updates.
 eboot # reboot without automatic disk decryption
 fai-wrapper # use fai classes outside of fai. sourced, not called.
 install-chboot # reinstall chboot to /boot subvols, for chboot updates.
 eboot # reboot without automatic disk decryption
 fai-wrapper # use fai classes outside of fai. sourced, not called.

+faiserver-disable # Disable the fai nfs server exports

 fresize # resize swap or boot partitions in a host
 
 fresize # resize swap or boot partitions in a host
 

+# Replacing a raid 10 disk
+
+pxe-server -S HOST fai
+ssh root@HOST
+cat >p
+PASSWORD HERE(ctrl-d ctrl-d)
+for d in /dev/disk/by-id/ata*part1; do cryptsetup luksOpen --key-file p $d crypt_dev_${d##*/}; done
+# btrfs replace disk # i forget the actual command
+x=(/dev/mapper/*part1); mount -o subvol=root_trisquelflidas $x /mnt
+mount -o subvol=boot_trisquelflidas /dev/sda3 /mnt/boot
+for x in dev proc sys; do mount -o bind /$x /mnt/$x; done
+chroot /mnt /bin/bash
+# replace disk in fstab
+# replace disk in /etc/crypttab
+update-grub
+update-initramfs -u
+mount /a
+/a/exe/keyscript-on
+exit
+reboot
+
+
+# dirinstall
+
+host=kw
+distro=flidas
+t=/tmp/d
+# be root:
+sudo sed -i 's/^LOGUSER=/#LOGUSER=/' /etc/fai/fai.conf
+# required after a failed run
+umount /var/lib/fai/config ||:
+fai-redep faiserver $distro
+rm -rf $t ; mkdir $t; fai -N -u $host dirinstall $t
+
+# cleanup:
+sudo sed -i 's/^#LOGUSER=/LOGUSER=/' /etc/fai/fai.conf
+s umount -R $t/proc
+
+
+# Turning a dirinstall into a basefile. taken from mk-basefile
+
+chroot $t apt-get clean
+rm -f $t/etc/hostname $t/etc/resolv.conf \
+      $t/var/lib/apt/lists/*_* $t/usr/bin/qemu-*-static \
+      $t/etc/udev/rules.d/70-persistent-net.rules
+> $t/etc/machine-id
+tar --one-file-system -C $t -cf - . | gzip > /a/bin/fai-basefiles/basefiles/FLIDAS64X.tar.gz

 
 License stuff:
 
 License stuff:

-The license for the project is GPLv2 or later, mostly because fai is
-and I periodically rebase off their example setup for debian. Also,
-there is a modified encrypt.upstream, which is from the cryptsetup
-package in arch, which is under the same license.
+The license for the project is GPLv2 or later, mostly because fai is and
+I periodically merge the upstream example config, which contains small
+scripts. Also, there is a modified encrypt.upstream, which is from the
+cryptsetup package in arch, which is under the same license.