# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+[[ $EUID == 0 ]] || exec sudo -E "${BASH_SOURCE[0]}" "$@"
-x="$(readlink -f "$BASH_SOURCE")"; source "${x%/*}/bash-trace"
+readonly this_file="$(readlink -f -- "${BASH_SOURCE[0]}")"
+script_dir="${this_file%/*}"
+# shellcheck source=./bash-trace
+source "${script_dir}/bash-trace"
+cd $script_dir
+PATH="$PATH:$PWD"
usage() {
cat <<EOF
-Usage: ${0##*/} [OPTIONS] [HOST TYPE]
-Configure dnsmasq boot options and fai-chboot if appropriate.
+Usage: ${0##*/} [OPTIONS] [HOST] [TYPE]
+Configure dnsmasq boot options and fai-chboot if appropriate. This is
+not general purpose, it has code specific to dhcp servers I run.
-Without HOST TYPE, disable server and fai server.
+Without TYPE, disable server and fai server. In that case, HOST is only
+needed for fsf office network.
-HOST A hostname known to the dhcp server, or default for all.
-TYPE One of arch, parabola, plain, fai.
+HOST Only do dhcp pxe for HOST. The hostname must be known to the dhcp
+ server to target its mac. Use "default" for all hosts.
+ Required in fsf office environment.
--d Don't alter dhcp config. Only make sense for fai type, and on network
- other than home network.
--r Don't redeploy fai config. For example, if there is a different host
- that is mid-install.
+TYPE One of arch, parabola, plain, fai.
-a Don't setup pxe, just Wait for 2 dhcp acks, then disable the pxe
server after a delay. First ack is for pxe boot, 2nd ack is
for os boot. Sometimes on debian, there is a 3rd one shortly
after the 2nd. I can't remember exactly why this caused a
problem, but I'm hoping the sleep will take care of it.
--S sets FAI_ACTION=sysinfo, see myfai-chboot for more info.
+-d Don't alter dhcp config. Only make sense for fai type, and on network
+ other than home or fsf, when using fai-cd, or pxe-kexec.
-k Pass -k to myfai-chboot.
+--no-r Pass --no-r to myfai-chboot.
+-r Don't redeploy fai config. For example, if there is a different host
+ that is mid-install.
+
+-S sets FAI_ACTION=sysinfo, see myfai-chboot for more info.
-w Setup pxe, then wait like -a.
-h|--help Print help and exit
ln -s <arch/parabola/debian iso dir> tftpboot
+Notes on debugging pxe dhcp tftp:
+
+For debugging dhcp, add to /etc/dnsmasq.conf: log-dhcp
+
+Newer openwrt runs dnsmasq with a whitelist of readable files and dirs:
+
+ps ww :
+/sbin/ujail -t 5 -n dnsmasq -u -l -r /bin/ubus -r /etc/TZ -r /etc/dnsmasq.conf -r /etc/ethers -r /etc/group -r /etc/hosts -r /etc/passwd -w /tmp/dhcp.leases -r /tmp/dnsmasq.d -r /tmp/hosts -r /tmp/resolv.conf.d -r /usr/bin/jshn -r /usr/lib/dnsmasq/dhcp-script.sh -r /usr/share/dnsmasq/dhcpbogushostname.conf -r /usr/share/dnsmasq/rfc6761.conf -r /usr/share/dnsmasq/trust-anchors.conf -r /usr/share/libubox/jshn.sh -r /var/etc/dnsmasq.conf.cfg01411c -w /var/run/dnsmasq/ -- /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c -k -x /var/run/dnsmasq/dnsmasq.cfg01411c.pid
+
+logging tftp requests:
+/etc/default/tftpd-hpa:
+add -vv:
+TFTP_OPTIONS="--secure -vv"
+jr -u tftpd-hpa -f
+
Note: Uses GNU getopt options parsing style
EOF
exit $1
}
+pre="${0##*/}:"
+m() { printf "$pre %s\n" "$*"; "$@"; }
+e() { printf "$pre %s\n" "$*"; }
+err() { echo "[$(date +'%Y-%m-%d %H:%M:%S%z')]: $pre: $*" >&2; }
+
+PATH="/a/exe:$PATH"
+
##### begin command line parsing ########
dhcp=true
redep=true
acks=2
wait=false
+fsf_office=false
+
+case $HOSTNAME in
+ x3|kw) fsf_office=true ;;
+esac
+
chboot_args=()
-temp=$(getopt -l help adrSkwh "$@") || usage 1
+temp=$(getopt -l no-r,help adkrSwh "$@") || usage 1
eval set -- "$temp"
while true; do
case $1 in
-a) wait=true; set=false; shift ;;
-d) dhcp=false; shift ;;
+ -k) chboot_args+=(-k); shift ;;
+ --no-r) chboot_args+=(--no-r); shift ;;
-r) redep=false; shift ;;
-S) chboot_args+=(-S); shift ;;
- -k) chboot_args+=(-k); shift ;;
-w) wait=true; set=true; shift ;;
-h|--help) usage ;;
--) shift; break ;;
read -r host type <<<"$@"
case $# in
- 0);;
+ [01]);;
2)
case $type in
arch|parabola) cmd=archlike ;;
esac
;;
*)
- echo "$0: error: expected 0 or 2 arguments"
+ echo "$0: error: expected 0-2 arguments"
echo
usage 1
;;
if $wait && ! $dhcp; then
- echo "$0: error -w conflicts with -d, choose one or other"
+ echo "$0: error -w conflicts with -d, choose one or other" >&2
exit 1
fi
+if $fsf_office && [[ ! $host ]]; then
+ echo "$0: at fsf_office, provide HOST arg" >&2
+ exit 1
+ fi
if [[ $host && $host != default ]]; then
host_tag="tag:$host,"
##### end command line parsing ########
-e() {
- echo "$@"
- "$@"
-}
-
archlike() {
cat <<EOF
-dhcp-option-force=209,boot/syslinux/${type}iso.cfg
-dhcp-option-force=210,/${type}/
-dhcp-boot=${host_tag}/${type}/boot/syslinux/lpxelinux.0
+${host_tag}209,boot/syslinux/${type}iso.cfg
+${host_tag}210,/${type}/
+${host_tag}option:bootfile-name,/${type}/boot/syslinux/lpxelinux.0
EOF
}
# if arch based was used before, this additionally needs
# the tftp link in /mnt/usb to be changed.
cat <<EOF
-dhcp-boot=${host_tag}pxelinux.0
+${host_tag}option:bootfile-name,pxelinux.0
EOF
}
fai() {
cat <<EOF
-dhcp-boot=${host_tag}pxelinux.0,faiserver.b8.nz,faiserver.b8.nz
+${host_tag}option:bootfile-name,pxelinux.0
+${host_tag}option:server-ip-address,$faiserverip
+${host_tag}option:tftp-server,$faiserverip
EOF
+ # Note, previously used normal dnsmasq option, but it requires dnsmasq
+ # restart, which causes momentary dns failures, which can bork an
+ # install.
+ #
+ # dhcp-boot=${host_tag}pxelinux.0,faiserver.b8.nz,faiserver.b8.nz
}
ack-wait() {
+ if $fsf_office; then
+ wait_cmd="ssh tarantula.office.fsf.org tail -n0 -f /var/log/syslog"
+ else
+ wait_cmd="ssh cmc logread -f"
+ fi
wait_count=$1
if [[ $host ]]; then
- host_regex=" $host"
+ if $fsf_office; then
+ host_regex=" $(getent hosts kw | awk '{print $1}' | sed 's/\./\\./g')"
+ else
+ host_regex=" $host"
+ fi
fi
- regex=".*DHCPACK.*$host_regex$"
+ regex=".*DHCPACK.*$host_regex\b"
i=0
while (( i != wait_count )) && read -r line; do
if [[ $line =~ $regex ]]; then
i=$((i+1))
echo $line
fi
- done < <(ssh wrt logread -f)
- e sleep 20
+ done < <($wait_cmd ||:) # tail returns 2 it seems
+ m sleep 20
}
set-pxe() {
$dhcp || return 0
- echo "$0: updating dnsmasq.conf:"
- $cmd
- ${cmd:-:}|ssh wrt "cedit pxe /etc/dnsmasq.conf || /etc/init.d/dnsmasq restart
+ if $fsf_office; then
+ if [[ ! $cmd ]]; then
+ e "removing pxe for $host on tarantula"
+ ssh tarantula.office.fsf.org bash -e <<EOF
+sed -ri 's/^( *host +$host *\{).*/\1/' /etc/dhcp/dhcpd.conf
+systemctl restart isc-dhcp-server
+EOF
+ elif [[ $cmd == fai ]]; then
+ e "adding pxe for $host on tarantula"
+ ssh tarantula.office.fsf.org bash -e <<EOF
+sed -ri 's/^( *host +$host *\{).*/\1 next-server faiserver.office.fsf.org; filename "pxelinux.0";/' /etc/dhcp/dhcpd.conf
+systemctl restart isc-dhcp-server
+EOF
+ fi
+ else
+ e "updating dnsmasq.conf:"
+ m $cmd
+ ${cmd:-:}|ssh cmc "dd of=/var/run/dnsmasq/dhcpopts.conf; /etc/init.d/dnsmasq reload
$([[ $type == arch || $type == parabola ]] && echo archlike-pxe-mount)"
+ fi
}
+type -t host &>/dev/null || sudo apt-get -y install dnsutils
+faiserverip=$(host faiserver | sed -rn 's/^\S+ has address //p;T;q' ||:)
+if [[ ! $faiserverip || $faiserverip =~ [[:space:]] ]]; then
+ echo "$0: error: failed to get \$faiserverip, got: $faiserverip"
+ exit 1
+fi
+
if $set; then
set-pxe
if [[ $type == fai ]]; then
- e myfai-chboot ${chboot_args[@]} $host
if $redep; then
- e fai-redep
+ m fai-redep
fi
+ m myfai-chboot ${chboot_args[@]} $host
else
# This will fail if faiserver is not setup, so ignore any
# failure and don't bother us about it.
- myfai-chboot &>/dev/null ||:
+ m myfai-chboot &>/dev/null ||:
fi
fi
echo "waiting for $acks dhcp acks then disabling pxe"
ack-wait $acks
type=
+ unset cmd
set-pxe
# previously tried waiting for one more ack then disabling faiserver,