postmaster=$u
mxhost=mail.iankelling.org
-mxport=25
+mxport=587
forward=$u@$mxhost
# old setup. left as comment for example
EOF
source /a/bin/bash_unpublished/source-semi-priv
- mkdir -p /etc/exim4/conf.d/main
+ mkdir -p /etc/exim4/conf.d/{main,transport,auth,router}
+ cat >/etc/exim4/rcpt_local_acl <<'EOF'
+# Only hosts we control send to mail.iankelling.org, so make sure
+# they are all authed.
+# Note, if we wanted authed senders for all domains,
+# we could make this condition in acl_check_mail
+deny
+ message = ian trusted domain recepient but no auth
+ !authenticated = *
+ domains = mail.iankelling.org
+EOF
+ cat >/etc/exim4/data_local_acl <<'EOF'
+# Except for the "condition =", this was
+# a comment in the check_data acl. The comment about this not
+# being suitable is mostly bs. The only thing related I found was to
+# add the condition =, cuz spamassassin has problems with big
+# messages and spammers don't bother with big messages,
+# but I've increased the size from 10k
+# suggested in official docs, and 100k in the wiki example because
+# those docs are rather old and I see a 110k spam message
+# pretty quickly looking through my spam folder.
+ warn
+ condition = ${if < {$message_size}{2000K}}
+ spam = Debian-exim:true
+ add_header = X-Spam_score: $spam_score\n\
+ X-Spam_score_int: $spam_score_int\n\
+ X-Spam_bar: $spam_bar\n\
+ X-Spam_report: $spam_report
+
+EOF
+ cat >/etc/exim4/conf.d/auth/29_exim4-config_auth <<'EOF'
+# from 30_exim4-config_examples
+
+plain_server:
+driver = plaintext
+public_name = PLAIN
+server_condition = "${if crypteq{$auth3}{${extract{1}{:}{${lookup{$auth2}lsearch{CONFDIR/passwd}{$value}{*:*}}}}}{1}{0}}"
+server_set_id = $auth2
+server_prompts = :
+.ifndef AUTH_SERVER_ALLOW_NOTLS_PASSWORDS
+server_advertise_condition = ${if eq{$tls_in_cipher}{}{}{*}}
+.endif
+EOF
+
+ cat >/etc/exim4/conf.d/router/900_exim4-config_local_user <<'EOF'
+### router/900_exim4-config_local_user
+#################################
+
+# This router matches local user mailboxes. If the router fails, the error
+# message is "Unknown user".
+
+local_user:
+ debug_print = "R: local_user for $local_part@$domain"
+ driver = accept
+ domains = +local_domains
+# ian: commented this, in conjunction with a dovecot lmtp
+# change so I get mail for all users.
+# check_local_user
+ local_parts = ! root
+ transport = LOCAL_DELIVERY
+ cannot_route_message = Unknown user
+EOF
+ cat >/etc/exim4/conf.d/transport/30_exim4-config_dovecot_lmtp <<'EOF'
+dovecot_lmtp:
+ driver = lmtp
+ socket = /var/run/dovecot/lmtp
+ #maximum number of deliveries per batch, default 1
+ batch_max = 200
+EOF
+
+ cat >/etc/exim4/conf.d/router/190_exim4-config_fsfsmarthost <<'EOF'
+# smarthost for fsf mail
+# ian: copied from /etc/exim4/conf.d/router/200_exim4-config_primary, and added senders = and
+# replaced DCsmarthost with mail.fsf.org
+fsfsmarthost:
+ debug_print = "R: smarthost for $local_part@$domain"
+ driver = manualroute
+ domains = ! +local_domains
+ senders = *@fsf.org
+ transport = remote_smtp_smarthost
+ route_list = * mail.fsf.org byname
+ host_find_failed = ignore
+ same_domain_copy_routing = yes
+ no_more
+EOF
#### begin mail cert setup ###
fi
if [[ $HOSTNAME == $MAIL_HOST ]]; then
local_mx=mail.iankelling.org
- rsync_common="rsync -ogtL --chown=root:Debian-exim --chmod=640 root@li:/etc/letsencrypt/live/$local_mx/"
+ rsync_common="rsync -ogtL --chown=root:Debian-exim --chmod=640 root@li.iankelling.org:/etc/letsencrypt/live/$local_mx/"
${rsync_common}fullchain.pem /etc/exim4/exim.crt
ret=$?
${rsync_common}privkey.pem /etc/exim4/exim.key
# MAIN_HARDCODE_PRIMARY_HOSTNAME might mess up the
# smarthost config type, not sure. all other settings
# would be unused in that config type.
- cat >/etc/exim4/conf.d/main/000_localmacros <<EOF
+ rm -f /etc/exim4/conf.d/main/000_localmacros # old filename
+ cat >/etc/exim4/conf.d/main/000_local <<EOF
+# enable 587 in addition to the default 25, so that
+# i can send mail where port 25 is firewalled by isp
+daemon_smtp_ports = 25 : 587
# i don't have ipv6 setup for my vpn tunnel yet.
disable_ipv6 = true
find / /nocow -xdev -gid $gid -exec chgrp -h 608 {} +
fi
+
# light version of exim does not have sasl auth support.
pi exim4-daemon-heavy spamassassin
-
##### begin spamassassin config
systemctl enable spamassassin
# per readme.debian
- cat >/etc/exim4/rcpt_local_acl <<'EOF'
-# Only hosts we control send to mail.iankelling.org, so make sure
-# they are all authed.
-# Note, if we wanted authed senders for all domains,
-# we could make this condition in acl_check_mail
-deny
- message = ian trusted domain recepient but no auth
- !authenticated = *
- domains = mail.iankelling.org
-EOF
- cat >/etc/exim4/data_local_acl <<'EOF'
-# Except for the "condition =", this was
-# a comment in the check_data acl. The comment about this not
-# being suitable is mostly bs. The only thing related I found was to
-# add the condition =, cuz spamassassin has problems with big
-# messages and spammers don't bother with big messages,
-# but I've increased the size from 10k
-# suggested in official docs, and 100k in the wiki example because
-# those docs are rather old and I see a 110k spam message
-# pretty quickly looking through my spam folder.
- warn
- condition = ${if < {$message_size}{2000K}}
- spam = Debian-exim:true
- add_header = X-Spam_score: $spam_score\n\
- X-Spam_score_int: $spam_score_int\n\
- X-Spam_bar: $spam_bar\n\
- X-Spam_report: $spam_report
-
-EOF
- cat >/etc/exim4/conf.d/auth/29_exim4-config_auth <<'EOF'
-# from 30_exim4-config_examples
-
-plain_server:
-driver = plaintext
-public_name = PLAIN
-server_condition = "${if crypteq{$auth3}{${extract{1}{:}{${lookup{$auth2}lsearch{CONFDIR/passwd}{$value}{*:*}}}}}{1}{0}}"
-server_set_id = $auth2
-server_prompts = :
-.ifndef AUTH_SERVER_ALLOW_NOTLS_PASSWORDS
-server_advertise_condition = ${if eq{$tls_in_cipher}{}{}{*}}
-.endif
-EOF
-
- cat >/etc/exim4/conf.d/router/900_exim4-config_local_user <<'EOF'
-### router/900_exim4-config_local_user
-#################################
-
-# This router matches local user mailboxes. If the router fails, the error
-# message is "Unknown user".
-
-local_user:
- debug_print = "R: local_user for $local_part@$domain"
- driver = accept
- domains = +local_domains
-# ian: commented this, in conjunction with a dovecot lmtp
-# change so I get mail for all users.
-# check_local_user
- local_parts = ! root
- transport = LOCAL_DELIVERY
- cannot_route_message = Unknown user
-EOF
- cat >/etc/exim4/conf.d/transport/30_exim4-config_dovecot_lmtp <<'EOF'
-dovecot_lmtp:
- driver = lmtp
- socket = /var/run/dovecot/lmtp
- #maximum number of deliveries per batch, default 1
- batch_max = 200
-EOF
-
- cat >/etc/exim4/conf.d/router/190_exim4-config_fsfsmarthost <<'EOF'
-# smarthost for fsf mail
-# ian: copied from /etc/exim4/conf.d/router/200_exim4-config_primary, and added senders = and
-# replaced DCsmarthost with mail.fsf.org
-fsfsmarthost:
- debug_print = "R: smarthost for $local_part@$domain"
- driver = manualroute
- domains = ! +local_domains
- senders = *@fsf.org
- transport = remote_smtp_smarthost
- route_list = * mail.fsf.org byname
- host_find_failed = ignore
- same_domain_copy_routing = yes
- no_more
-EOF
-
# https://blog.dhampir.no/content/make-exim4-on-debian-respect-forward-and-etcaliases-when-using-a-smarthost
# i only need .forwards, so just doing that one.
cd /etc/exim4/conf.d/router