#!/bin/bash -l
# Copyright (C) 2016 Ian Kelling
-# This program is under GPL v. 3 or later, see <http://www.gnu.org/licenses/>
+
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+
+# http://www.apache.org/licenses/LICENSE-2.0
+
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
errcatch
set -x
htop
mailutils
nmon
+ rdiff-backup
ruby
ruby-rest-client
tree
*)
# universal packages
# swh-plugins is for karaoke pulsaudio filter.
+ # mutagen for pithos
simple_packages+=(
apache2
bwm-ng
fdupes
filelight
gdb
+ goaccess
gnome-screenshot
jq
locate
+ manpages
meld
+ nmap
offlineimap
p7zip
paprefs
pdfgrep
pianobar
pidgin
- rdiff-backup
+ python3-mutagen
slock
squashfs-tools
swh-plugins
-########### begin section including lj ################
+########### begin section including li ################
+case $distro in
+ debian)
+ if [[ `debian-archive` == testing ]]; then
+ pi acme-tiny
+ fi
+esac
+
case $distro in
fedora) spa unrar ;;
*) spa unrar-free ;;
# this says disabling the service, it will still get restarted
# but this script doesn't do anything on restart, so it should be fine
s dd of=/var/run/motd.dynamic if=/dev/null
- s update-rc.d motd disable
+ # stretch doesn't have initscripts pkg installed by default
+ if [[ $(debian-codename) == jessie ]]; then
+ s update-rc.d motd disable
+ fi
;;
ubuntu)
# this isn't a complete solution. It still shows me when updates are available,
# /usr/share/doc/unattended-upgrades# cat README.md
# /etc/apt/apt.conf.d/50unattended-upgrades
if isdebian; then
- debian-setup-auto-update
+ setup-debian-auto-update
fi
-# cron
-/a/bin/crons/all
-
+# we've got a few dependencies later on, so install them now.
+pi "${simple_packages[@]}"
+simple_packages=()
case $HOSTNAME in
lj|li)
- pi "${simple_packages[@]}"
case $HOSTNAME in
lj) domain=iank.bid ;;
li) domain=iankelling.org ;;
esac
- homepage-setup $domain
- s rld /a/h/_site/ /var/www/$domain/html
-
- curl https://$domain/git/?p=mediawiki-setup/.git;a=blob_plain;f=mw-setup-script;hb=HEAD | bash
- $src/phab-setup
+ /a/h/setup.sh $domain
+ /a/h/build.rb
+ sudo -E /a/bin/mediawiki-setup/mw-setup-script
+ #$src/phab-setup
echo "$0: $(date): ending now)"
exit 0
########### end section including li/lj ###############
+if [[ $HOSTNAME == frodo ]]; then
+ case $distro in
+ ubunut|debian)
+ pi libsqlite3-dev
+ cd /a/opt/duperemove
+ make clean
+ make
+ s make install
+ ;;
+ #others unknown
+ esac
+fi
+
case $distro in
arch) pi syncthing ;;
ubuntu|debian)
- # google led me here:
- # https://apt.syncthing.net/
- curl -s https://syncthing.net/release-key.txt | sudo apt-key add -
- s="deb http://apt.syncthing.net/ syncthing release"
- if [[ $(cat /etc/apt/sources.list.d/syncthing.list) != $s ]]; then
- echo "$s" | s dd of=/etc/apt/sources.list.d/syncthing.list
- p update
+ # testing has relatively up to date packages
+ if ! isdebian-testing; then
+ # based on error when doing apt-get update:
+ # E: The method driver /usr/lib/apt/methods/https could not be found.
+ pi apt-transport-https
+ # google led me here:
+ # https://apt.syncthing.net/
+ curl -s https://syncthing.net/release-key.txt | sudo apt-key add -
+ s="deb http://apt.syncthing.net/ syncthing release"
+ if [[ $(cat /etc/apt/sources.list.d/syncthing.list) != $s ]]; then
+ echo "$s" | s dd of=/etc/apt/sources.list.d/syncthing.list
+ p update
+ fi
fi
pi syncthing
;;
# trash can versioning for sake of space on phone, with
# clean out after 7 days.
#
-# did ser syncthing@ian start
+# did:
+# ser start syncthing@ian
# then on phone, add device, hit bar code icon,
# install bar code scanner.
####### misc packages ###########
-if [[ $HOSTNAME == frodo ]]; then
+if [[ $HOSTNAME == treetowl ]]; then
case $distro in
debian|ubuntu)
# note i had to do this, which is persistent:
"profiles" : [
{
"profile-name" : "Default",
- "hostname" : "frodo",
+ "hostname" : "treetowl",
"rpc-url-path" : "/transmission/rpc",
"username" : "",
"password" : "",
cd /a/opt
wget -nv -N https://dl.google.com/linux/direct/google-chrome-stable_current_amd64.deb
errallow
+ set -o pipefail
s dpkg -i google-chrome-stable_current_amd64.deb |& tee $log
code=$?
errcatch
case $code in
0) : ;;
*)
- if grep '^dpkg: dependency problems prevent configuration of' \
+ # previously I had a more specific search, but dpkg
+ # changed it's output as of 7/2016
+ if grep 'dependency problems' \
$log &>/dev/null; then
s apt-get -fy install
else
exit 1
fi
;;
- esac
- ;;
- arch)
- pi google-chrome
- ;;
- esac
- ;;
+esac
+;;
+arch)
+ pi google-chrome
+ ;;
+esac
+;;
esac
# printer
bridge-utils dnsmasq qemu bind-tools
# otherwise we get error about accessing kvm module.
# seems like there might be a better way, but google was a bit vague.
- s sed -ri '/^ *user *=/d' /etc/libvirt/qemu.conf
+ s sed -ri --follow-symlinks '/^ *user *=/d' /etc/libvirt/qemu.conf
echo 'user = "root"' | s tee -a /etc/libvirt/qemu.conf
# https://bbs.archlinux.org/viewtopic.php?id=206206
# # this should prolly go in the wiki
# because no systemd user instance was running.
# Doing systemd --user resulted in
# Trying to run as user instance, but $XDG_RUNTIME_DIR is not set
-case $distro in
- # ubuntu unknown. probably the same as debian, just check if the
- # init scripts come with the package.
- debian)
- # copied from arch, but moved to etc
- s dd of=/etc/systemd/user/synergys.service <<'EOF'
-[Unit]
-Description=Synergy Server Daemon
-After=network.target
-
-[Service]
-User=%i
-ExecStart=/usr/bin/synergys --no-daemon --config /etc/synergy.conf
-Restart=on-failure
-
-[Install]
-WantedBy=multi-user.target
-EOF
- s dd of=/etc/systemd/user/synergys.socket <<'EOF'
-[Unit]
-Conflicts=synergys@.service
-[Socket]
-ListenStream=24800
-Accept=false
+if isdebian-testing; then
+ # as of 7/2016, has no unstable deps, and is not in testing anymore.
+ pi synergy/unstable
+else
+ pi synergy
+fi
-[Install]
-WantedBy=sockets.target
-EOF
- ;;&
- *)
- pi synergy
- # taken from arch wiki.
- s dd of=/etc/systemd/system/synergyc@.service <<'EOF'
-[Unit]
-Description=Synergy Client
-After=network.target
-
-[Service]
-User=%i
-ExecStart=/usr/bin/synergyc --no-daemon treetowl
-Restart=on-failure
-# per man systemd.unit, StartLimitInterval, by default we
-# restart more than 5 times in 10 seconds.
-# And this param defaults too 200 miliseconds.
-RestartSec=3s
-
-[Install]
-WantedBy=multi-user.target
-EOF
- case $HOSTNAME in
- frodo)
- ser enable synergyc@ian
- ser start synergyc@ian ||: # X might not be running yet
- systemctl --user start synergys ||:
- systemctl --user enable synergys
- ;;
- treetowl) systemctl --user enable synergys ;;
- esac
- ;;
-esac
+# case $distro in
+# # ubuntu unknown. probably the same as debian, just check if the
+# # init scripts come with the package.
+# debian)
+# # copied from arch, but moved to etc
+# s dd of=/etc/systemd/user/synergys.service <<'EOF'
+# [Unit]
+# Description=Synergy Server Daemon
+# After=network.target
+
+# [Service]
+# User=%i
+# ExecStart=/usr/bin/synergys --no-daemon --config /etc/synergy.conf
+# Restart=on-failure
+
+# [Install]
+# WantedBy=multi-user.target
+# EOF
+# s dd of=/etc/systemd/user/synergys.socket <<'EOF'
+# [Unit]
+# Conflicts=synergys@.service
+
+# [Socket]
+# ListenStream=24800
+# Accept=false
+
+# [Install]
+# WantedBy=sockets.target
+# EOF
+# # had this fail with 'Failed to connect to bus: No such file or directory'
+# # then when I tried it manually, it worked fine...
+# if ! systemctl --user daemon-reload; then
+# sleep 2
+# echo retrying systemd user daemon reload
+# systemctl --user daemon-reload
+# fi
+# ;;&
+# *)
+# # taken from arch wiki.
+# s dd of=/etc/systemd/system/synergyc@.service <<'EOF'
+# [Unit]
+# Description=Synergy Client
+# After=network.target
+
+# [Service]
+# User=%i
+# ExecStart=/usr/bin/synergyc --no-daemon frodo
+# Restart=on-failure
+# # per man systemd.unit, StartLimitInterval, by default we
+# # restart more than 5 times in 10 seconds.
+# # And this param defaults too 200 miliseconds.
+# RestartSec=3s
+
+# [Install]
+# WantedBy=multi-user.target
+# EOF
+# s systemctl daemon-reload
+# case $HOSTNAME in
+# x2|treetowl)
+# ser enable synergyc@ian
+# ser start synergyc@ian ||: # X might not be running yet
+# ;;
+# frodo)
+# systemctl --user start synergys ||:
+# systemctl --user enable synergys
+# ;;
+# esac
+# ;;
+# esac
######### end misc packages #########
# -o on, turn on 4 hour period non-performance degrading testing.
# short test daily 2-3am, extended tests Saturdays between 3-4am:
sched="-s (S/../.././02|L/../../6/03)"
-s sed -i "s#^[[:space:]]*DEVICESCAN.*#\
-DEVICESCAN -a -o on -S on -n standby,q $sched\
+s sed -i --follow-symlinks "s#^[[:space:]]*DEVICESCAN.*#\
+DEVICESCAN -a -o on -S on -n standby,q $sched \
-m ian@iankelling.org -M exec /usr/local/bin/smart-notify#" /etc/smartd.conf
# in the default configuration of at least ubuntu 14.04, resolvconf is
# consulted first. This is often slower and undesirable, ie. local dns
# queries go from 0ms to 10+ or 100+ ms. To reverse the ordering, you
# can do:
-#sudo sed -i '/tun\*\|tap\*/d' /etc/resolvconf/interface-order
+#sudo sed -i --follow-symlinks '/tun\*\|tap\*/d' /etc/resolvconf/interface-order
# however, this breaks dns lookup for hosts on the openvpn lan.
# I can\'t figure out why hosts on the normal lan would not be
# broken under the default ordering, except the host I was
########### misc stuff
+s cedit /etc/goaccess.conf <<'EOF' || [[ $? == 1 ]]
+# all things found from looking around the default config
+# copied existing NCSA Combined Log Format with Virtual Host, plus %L
+log-format %^:%^ %h %^[%d:%t %^] "%r" %s %b "%R" "%u" %D
+time-format %H:%M:%S
+date-format %d/%b/%Y
+log-file /var/log/apache2/access.log
+color-scheme 2
+
+# tip: copy access.log files to a stretch host directory, then run
+# jessie's goaccess is too old for some options, and it's
+# not easily installed from a testing.
+# goaccess --ignore-crawlers -f <(cat *) -a -o html > x.html
+EOF
+
+
+if [[ $HOSTNAME == treetowl ]] && ! sudo test -e /etc/openvpn/client.key; then
+ /a/bin/vpn-setup/vpn-mk-client-cert dopub
+fi
+
+
case $distro in
debian|ubuntu)
case `debian-archive` in
;;
esac
-# not using it atm, and for jessie, it depends on a higher version of btrfs-tools
+# note, for jessie, it depends on a higher version of btrfs-tools
# case $distro in
# arch|debian|ubuntu) pi btrbk ;;
# # others unknown
# esac
+cd /a/opt/btrbk
+s make install
if [[ $HOSTNAME == treetowl ]] && [[ `debian-archive` != testing ]]; then
# fail2 ban is broken, with a workaround, per
;;
esac
-if [[ $HOSTNAME == frodo ]]; then
- tu /etc/exports <<'EOF'
-/k 192.168.1.0/24(rw,nohide,no_subtree_check,insecure)
-EOF
- s exportfs -rav
-fi
-
-if [[ -e /k/video ]]; then
+if [[ $HOSTNAME == treetowl ]]; then
# nohide = export filesystems mounted deeper than the export point
# fsid=0 makes this export the "root" export
# not documented in the man page, but this means
# 1. it can be mounted with a shorthand of server:/
# 2. exports that are subdirectories of this one will automatically be mounted
- tu /etc/exports '/i/video 192.168.1.0/24(rw,fsid=0,nohide,no_root_squash,async,no_subtree_check,insecure)'
+ tu /etc/exports <<'EOF'
+/k 192.168.1.0/24(rw,fsid=0,nohide,no_root_squash,async,no_subtree_check,insecure)
+EOF
s exportfs -rav
- showmount -e localhost
fi
-
e "$end_msg_var"
fi
-pi samba
-# note samba re-reads it's config every 1 minute
-case $distro in
- arch) s cp /etc/samba/smb.conf.default /etc/samba/smb.conf ;;
-esac
+if [[ $HOSTNAME == treetowl ]]; then
+ pi samba
+ # note samba re-reads it\'s config every 1 minute
+ case $distro in
+ arch) s cp /etc/samba/smb.conf.default /etc/samba/smb.conf ;;
+ esac
-# add 2 lines after workgroup option
-s sed -ri '/^\s*encrypt passwords\s*=/d' /etc/samba/smb.conf
-s sed -ri '/^\s*map to guest\s*=/d' /etc/samba/smb.conf
-s sed -i 's/\(\s*workgroup\s*=\).*/\1 WORKGROUP\n\tencrypt passwords = yes\n\tmap to guest = bad password/' /etc/samba/smb.conf
-# remove default homes section. not sharing that.
-s sed -ri '/^\s*\[homes\]/,/\s*\[/d' /etc/samba/smb.conf
+ # add 2 lines after workgroup option
+ s sed -ri --follow-symlinks '/^\s*encrypt passwords\s*=/d' /etc/samba/smb.conf
+ s sed -ri --follow-symlinks '/^\s*map to guest\s*=/d' /etc/samba/smb.conf
+ s sed -i --follow-symlinks 's/\(\s*workgroup\s*=\).*/\1 WORKGROUP\n\tencrypt passwords = yes\n\tmap to guest = bad password/' /etc/samba/smb.conf
+ # remove default homes section. not sharing that.
+ s sed -ri --follow-symlinks '/^\s*\[homes\]/,/\s*\[/d' /etc/samba/smb.conf
-if ! grep -xF '[public]' /etc/samba/smb.conf &>/dev/null; then
- s tee -a /etc/samba/smb.conf <<'EOF'
+ if ! grep -xF '[public]' /etc/samba/smb.conf &>/dev/null; then
+ s tee -a /etc/samba/smb.conf <<'EOF'
[public]
guest ok = yes
read only = no
- path = /kfrodo
+ path = /kr
EOF
-fi
+ fi
-case $distro in
- debian|ubuntu)
-# systemd claims it generates units from /etc/init.d, but it clearly doesn't
-# in debian. I have no idea how they are related. fuck debian right now. It's
-# not documented. samba has a systemd init file linked to /dev/null.
-# There's this https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=769714 which
-# claims samba's sub-services will be started automatically by systemd... it
-# didn't on install, wonder if it will on boot. It clued me in how to start
-# it manually though. Nothing in /usr/share/doc/samba, debian admin guide
-# says nothing about any of this. (this is in debian testing as of 4/2016).
-
-s /etc/init.d/samba start
-;;
- arch)
- sgo samba
- ;;
-esac
+ case $distro in
+ debian|ubuntu)
+ # systemd claims it generates units from /etc/init.d, but it
+ # clearly doesn\'t in debian. I have no idea how they are
+ # related. fuck debian right now. It\'s not documented. samba
+ # has a systemd init file linked to /dev/null. There\'s this
+ # https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=769714 which
+ # claims samba\'s sub-services will be started automatically by
+ # systemd... it didn\'t on install, wonder if it will on
+ # boot. It clued me in how to start it manually though. Nothing
+ # in /usr/share/doc/samba, debian admin guide says nothing about
+ # any of this. (this is in debian testing as of 4/2016).
+
+ s /etc/init.d/samba start
+ ;;
+ arch)
+ sgo samba
+ ;;
+ esac
+fi
tu /etc/hosts <<< "127.0.1.1 $(hostname).lan $(hostname)"
-
-rootdev=$(mount | sed -rn 's#^(\S+) on / .*#\1#p')
-s mkdir /mnt/root
-tu /etc/fstab <<< "$rootdev /mnt/root btrfs noatime,subvolid=0 0 0"
-mountpoint /mnt/root || s mount /mnt/root
-idev=$(mount | sed -rn 's#^(\S+) on /i .*#\1#p')
-if [[ $idev != $rootdev ]]; then
- s mkdir /mnt/iroot
- tu /etc/fstab <<< "$idev /mnt/iroot btrfs noatime,subvolid=0 0 0"
- mountpoint /mnt/iroot || s mount /mnt/iroot
-fi
-
-
######### begin stuff belonging at the end ##########
iankelling.org / git / distro-setup / blobdiff