distro=$(distro-name)
pending_reboot=false
+sed="sed --follow-symlinks"
# template
case $distro in
ruby-rest-client
tree
vim
+ wcd
)
case $HOSTNAME in
# mutagen for pithos
simple_packages+=(
apache2
+ apache2-doc
+ apt-doc
+ aptitude-doc-en
+ bash-doc
+ binutils-doc
bwm-ng
chromium
+ cpio-doc
+ cron
+ debconf-doc
duplicity
+ eclipse
evince
fdupes
+ feh
filelight
+ gawk-doc
+ gcc-doc
gdb
+ gdb-doc
+ git-doc
+ gitk
+ glibc-doc
goaccess
gnome-screenshot
+ i3lock
+ iproute2-doc
jq
+ linux-doc
locate
+ make-doc
manpages
+ manpages-dev
meld
+ mumble
nmap
offlineimap
p7zip
paprefs
+ parted-doc
pavucontrol
pdfgrep
+ perl-doc
pianobar
pidgin
+ python3-doc
python3-mutagen
- slock
+ reportbug
+ sqlite3-doc
squashfs-tools
swh-plugins
+ tar-doc
tcpdump
transmission-remote-gtk
vlc
+ whois
)
+ spa $(apt-cache search ruby[.0-9]+-doc| awk '{print $1}')
;;
esac
-
########### begin section including li ################
# no equivalent in other distros:
case $distro in
debian|ubuntu)
- pi apt-file aptitude
- s apt-file update
+ pi aptitude
+ if ! dpkg -s apt-file &>/dev/null; then
+ # this condition is just a speed optimization
+ pi apt-file
+ s apt-file update
+ fi
# for debconf-get-selections
spa debconf-utils
;;
pi "${simple_packages[@]}"
simple_packages=()
+# website setup
case $HOSTNAME in
lj|li)
case $HOSTNAME in
- lj) domain=iank.bid ;;
+ lj) domain=iank.bid; exit 0 ;;
li) domain=iankelling.org ;;
esac
/a/h/setup.sh $domain
sudo -E /a/bin/mediawiki-setup/mw-setup-script
#$src/phab-setup
+ pi-nostart mumble-server
+ s $sed -ri "s/^ *(serverpassword=).*/\1$(< /a/bin/bash_unpublished/mumble_pass)/" /etc/mumble-server.ini
+ sgo mumble-server
+
+ vpn-server-setup -d
+
+ sudo dd of=/etc/systemd/system/vpnmail.service <<EOF
+[Unit]
+Description=Turns on iptables mail nat
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+ExecStart=/a/bin/distro-setup/vpn-mail-forward start
+ExecStop=/a/bin/distro-setup/vpn-mail-forward stop
+
+[Install]
+WantedBy=openvpn.service
+EOF
+ ser daemon-reload
+ ser enable vpnmail.service
+ acme-tiny-wrapper mail.iankelling.org
+ # needed for li's local mail delivery. there might
+ # be a better way to do it that doesn't require disabling
+ # it during le verification, but whatever for now.
+ f=/etc/cron.daily/lets-encrypt-mail_iankelling_org
+ l="10.8.0.4 mail.iankelling.org"
+ tu /etc/hosts <<<"$l"
+ s sed -i '/^\s*sysv acme-tiny-wrapper/i sed -i /^10\.8\.0\.4/d /etc/hosts' $f
+ echo "echo $l >>/etc/hosts" | s tee -a $f
+ sgo openvpn
+ domain=cal.iankelling.org
+ acme-tiny-wrapper $domain
+ apache-site -f 10.8.0.4:5232 - $domain <<'EOF'
+#https://httpd.apache.org/docs/2.4/mod/mod_authn_core.html#authtype
+ <Directory "/var/www/cal.iankelling.org/html">
+ Options +FollowSymLinks +Multiviews +Indexes
+ AllowOverride None
+ AuthType basic
+ AuthName "Authentication Required"
+ # setup one time, with root:www-data, 640
+ AuthUserFile "/etc/caldav-htpasswd"
+ Require valid-user
+ </Directory>
+EOF
+ # nginx version of above would be:
+ # auth_basic "Not currently available";
+ # auth_basic_user_file /etc/nginx/caldav/htpasswd;
+
+
+ ########## begin pump.io setup ##########
+
+ # once pump adds a logrotation script, turn off nologger,
+ # and add
+ # "logfile": "/var/log/pumpio/pumpio.log",
+ #
+ s dd of=/etc/pump.io.json <<'EOF'
+{
+ "secret": "SECRET_REPLACE_ME",
+ "driver": "mongodb",
+ "params": { "dbname": "pumpio" },
+ "noweb": false,
+ "site": "pump.iankelling.org",
+ "owner": "Ian Kelling",
+ "ownerURL": "https://iankelling.org/",
+ "port": 8001,
+ "urlPort": 443,
+ "hostname": "pump.iankelling.org",
+ "nologger": true,
+ "datadir": "/home/pumpio/pumpdata",
+ "enableUploads": true,
+ "debugClient": false,
+ "disableRegistration": true,
+ "noCDN": true,
+ "key": "/home/pumpio/pump.iankelling.org-domain.key",
+ "cert": "/home/pumpio/pump.iankelling.org-chained.pem",
+ "address": "localhost",
+ "sockjs": false
+}
+EOF
+ s sed -i "s#SECRET_REPLACE_ME#$(cat /p/c/machine_specific/li/pump-secret)#" /etc/pump.io.json
+
+ # jessie\'s node is too old
+ # https://nodejs.org/en/download/package-manager/
+ curl -sL https://deb.nodesource.com/setup_6.x | sudo -E bash -
+ pi nodejs
+ cd /home/ian
+ rm -rf pump.io.git
+ git clone https://github.com/pump-io/pump.io.git
+ cd pump.io
+ # note: doing this or the npm install pump.io as root had problems.
+ npm install
+ npm run build
+ # normally, next command would be
+ # s npm install -g databank-mongodb
+ # but it\'s this until a bug in pump gets fixed
+ s npm install -g databank-mongodb@0.19.2
+ s useradd -m -s /bin/false pumpio
+ sudo -u pumpio mkdir -p /home/pumpio/pumpdata
+ # for testing browser when only listening to localhost,
+ # in the pump.io.json, set hostname localhost, urlPort 5233
+ #ssh -L 5233:localhost:5233 li
+ acme-tiny-wrapper -c /home/pumpio pump.iankelling.org
+
+ s mkdir -p /var/log/pumpio/
+ s chown pumpio:pumpio /var/log/pumpio/
+
+ apache-site -c /home/pumpio - pump.iankelling.org <<'EOF'
+# currently a bug in pump that we cant terminate ssl
+ SSLProxyEngine On
+ ProxyPreserveHost On
+ ProxyPass / https://127.0.0.1:8001/
+ ProxyPassReverse / https://127.0.0.1:8001/
+ # i have sockjs disabled per people suggesting that
+ # it won't work with apache right now.
+ # not sure if it would work with this,
+ # but afaik, this is pointless atm.
+ <Location /main/realtime/sockjs/>
+ ProxyPass wss://127.0.0.1:8001/main/realtime/sockjs/
+ ProxyPassReverse wss://127.0.0.1:8001/main/realtime/sockjs/
+ </Location>
+EOF
+
+ s dd of=/etc/systemd/system/pump.service <<'EOF'
+[Unit]
+Description=pump.io
+After=syslog.target network.target
+
+[Service]
+Type=simple
+User=pumpio
+Group=pumpio
+ExecStart=/home/ian/pump.io/bin/pump
+Environment=NODE_ENV=production
+# failed to find databank-mongodb without this.
+# I just looked at my environment variables took a guess.
+Environment=NODE_PATH=/usr/lib/nodejs:/usr/lib/node_modules:/usr/share/javascript
+
+[Install]
+WantedBy=multi-user.target
+EOF
+ ser daemon-reload
+ sgo pump
+ ########## end pump.io setup ############
+
echo "$0: $(date): ending now)"
exit 0
;;
esac
+
########### end section including li/lj ###############
+# pump.io periodic backup
+if [[ $HOSTNAME == treetowl ]]; then
+ s dd of=/etc/systemd/system/pumpbackup.service <<'EOF'
+[Unit]
+Description=pump li backup
+After=multi-user.target
+
+[Service]
+User=ian
+Type=oneshot
+ExecStart=/a/bin/log-quiet/sysd-mail-once pump-backup /a/bin/distro-setup/pump-backup
+EOF
-if [[ $HOSTNAME == frodo ]]; then
- case $distro in
- ubunut|debian)
- pi libsqlite3-dev
- cd /a/opt/duperemove
- make clean
- make
- s make install
- ;;
- #others unknown
- esac
-fi
+ s dd of=/etc/systemd/system/pumpbackup.timer <<'EOF'
+[Unit]
+Description=pump li backup hourly
-case $distro in
- arch) pi syncthing ;;
- ubuntu|debian)
- # testing has relatively up to date packages
- if ! isdebian-testing; then
- # based on error when doing apt-get update:
- # E: The method driver /usr/lib/apt/methods/https could not be found.
- pi apt-transport-https
- # google led me here:
- # https://apt.syncthing.net/
- curl -s https://syncthing.net/release-key.txt | sudo apt-key add -
- s="deb http://apt.syncthing.net/ syncthing release"
- if [[ $(cat /etc/apt/sources.list.d/syncthing.list) != $s ]]; then
- echo "$s" | s dd of=/etc/apt/sources.list.d/syncthing.list
- p update
- fi
- fi
- pi syncthing
- ;;
-esac
-# installed via f-droid
-# top right, actions, device id
-#
-# for installing on a remote comp:
-# ssh -L 8384:localhost:8384 -N frodo
-# went to http://localhost:8384/
-#
-# add folder to sync phone,
-# staggered file versioning would be my normal choice, but choose
-# trash can versioning for sake of space on phone, with
-# clean out after 7 days.
-#
-# did:
-# ser start syncthing@ian
-# then on phone, add device, hit bar code icon,
-# install bar code scanner.
+[Timer]
+OnCalendar=hourly
+[Install]
+WantedBy=timers.target
+EOF
+ s systemctl daemon-reload
+ sgo pumpbackup.timer
+fi
-# no equivalent in other distros:
case $distro in
debian|ubuntu)
- # for gui bug reporting
- spa python-vte
+ # suggests because we want the resolvconf package.
+ # todo: check other distros to make sure it's installed
+ pi-nostart --install-suggests openvpn
+ # pi-nostart does not disable
+ ser disable openvpn
;;
+*) pi openvpn;;
esac
+if private-host; then
+ vpn-mk-client-cert -n mail li
+ cn=$(s openssl x509 -noout -nameopt multiline -subject \
+ -in /etc/openvpn/client/mail.crt | \
+ sed -rn 's/^\s*commonName\s*=\s*(.*)/\1/p')
+ echo "ifconfig-push 10.8.0.4 255.255.255.0" | \
+ ssh root@li dd of=/etc/openvpn/client-config/"$cn"
+fi
+ser enable mailroute
+if [[ $HOSTNAME == treetowl ]]; then
+ # note, this will need to be changed when the mail/contacts host changes
+ sgo openvpn-client@mail
+ /a/bin/distro-setup/radicale-setup
+fi
-####### misc packages ###########
+## android studio setup
+# this contains the setting for android sdk to point to
+# /a/opt/androidsdk, which is asked upon first run
+lnf /a/opt/.AndroidStudio2.2 ~
+# android site says it needs a bunch of packages for ubuntu,
+# but I googled for debian, and someone says you just need lib32stdc++6 plus the
+# jdk
+# https://pid7007blog.blogspot.com/2015/07/installing-android-studio-in-debian-8.html
+# see w.org for more android studio details
+spa lib32stdc++6 default-jdk
if [[ $HOSTNAME == treetowl ]]; then
+ # It\'s simpler to just worry about running it in one place for now.
+ # I assume it would work to clone it\'s config to another non-phone
+ # and just run it in one place instead of the normal having a
+ # separate config. I lean toward using the same config, since btrfs
+ # syncs between comps.
+ case $distro in
+ arch) pi syncthing ;;
+ ubuntu|debian)
+ # testing has relatively up to date packages
+ if ! isdebian-testing; then
+ # based on error when doing apt-get update:
+ # E: The method driver /usr/lib/apt/methods/https could not be found.
+ pi apt-transport-https
+ # google led me here:
+ # https://apt.syncthing.net/
+ curl -s https://syncthing.net/release-key.txt | sudo apt-key add -
+ s="deb http://apt.syncthing.net/ syncthing release"
+ if [[ $(cat /etc/apt/sources.list.d/syncthing.list) != $s ]]; then
+ echo "$s" | s dd of=/etc/apt/sources.list.d/syncthing.list
+ p update
+ fi
+ fi
+ pi syncthing
+ ;;
+ esac
+ lnf -T /w/syncthing /home/ian/.config/syncthing
+ sgo syncthing@ian # runs as ian
+
+ # these things persist in ~/.config/syncthing, which I save in
+ # /w/syncthing (not in /p, because syncthing should continue to
+ # run on home server even when using laptop as primary device)
+ # open http://localhost:8384/
+ # change listen address from default to tcp://:22001,
+ # this is because we do port forward so it doesn\'t have to use
+ # some external server, but the syncthing is broken for port forward,
+ # you get a message, something "like connected to myself, this should not happen"
+ # when connecting to other local devices, so I bump the port up by 1,
+ # based on
+ # https://forum.syncthing.net/t/connected-to-myself-should-not-happen/1763/19.
+ # Without this, it was being stuck syncing at 0%.
+ # Set gui username and password.
+ #
+ # install syncthing via f-droid,
+ # folder setting, turn off master folder (makes it read only).
+ # on phone, add device, click bar code icon
+ # on dekstop, top right, actions, device id
+ # after adding, notification will appear on desktop to confirm
+ #
+ # syncing folder. from phone to desktop: select desktop in the
+ # folder on phone's sync options, notification will appear in
+ # desktop's web ui within a minute. For the reverse, the
+ # notification will appear in android's notifications, you have to
+ # swipe down and tap it to add the folder. It won't appear in the
+ # syncthing ui, which would be intuitive, but don't wait for it
+ # there.
+ #
+ # On phone, set settings to run syncthing all the time, and
+ # show no notification.
+ #
+ # Folder versioning would make sense if I didn\'t already use btrfs
+ # for backups. I would choose staggered, or trash can for more space.
+ #
+ # if needed to install on a remote comp:
+ # ssh -L 8384:localhost:8384 -N frodo
+ # open http://localhost:8384/
+ #
+ # Note, the other thing i did was port forward port 22000,
+ # per https://docs.syncthing.net/users/firewall.html
+fi
+
+
+
+ # no equivalent in other distros:
case $distro in
debian|ubuntu)
- # note i had to do this, which is persistent:
- # cd /i/k
- # s chgrp debian-transmission torrents partial-torrents
-
- # syslog says things like
- # 'Failed to set receive buffer: requested 4194304, got 425984'
- # google suggets giving it even more than that
- tu /etc/sysctl.conf<<'EOF'
+ # for gui bug reporting
+ spa python-vte
+ ;;
+ esac
+
+
+ ####### misc packages ###########
+
+ if [[ $HOSTNAME == treetowl ]]; then
+ case $distro in
+ debian|ubuntu)
+ # note i had to do this, which is persistent:
+ # cd /i/k
+ # s chgrp debian-transmission torrents partial-torrents
+
+ # syslog says things like
+ # 'Failed to set receive buffer: requested 4194304, got 425984'
+ # google suggets giving it even more than that
+ tu /etc/sysctl.conf<<'EOF'
net.core.rmem_max = 67108864
net.core.wmem_max = 16777216
EOF
- s sysctl -p
+ s sysctl -p
# some reason it doesn't seem to start automatically anyways
pi-nostart transmission-daemon
+
+ # the folder was moved here after an install around 02/2017.
+ # it contains runtime data,
+ # plus a simple symlink to the config file which it's
+ # not worth separating out.
+ s lnf -T /i/transmission-daemon /var/lib/transmission-daemon/.config/transmission-daemon
+ #
# config file documented here, and it's the same config
# for daemon vs client, so it's documented in the gui.
# https://trac.transmissionbt.com/wiki/EditConfigFiles#Options
+ #
+ # I originaly setup rpc-whitelist, but after using
+ # routing to a network namespace, it doesn't see the
+ # real source address, so it's disabled.
+ #
+ # Changed the cache-size to 256 mb, reduces disk use.
+ # It is a read & write cache.
+ #
s ruby <<'EOF'
require 'json'
p = '/etc/transmission-daemon/settings.json'
File.write(p, JSON.pretty_generate(JSON.parse(File.read(p)).merge({
-'rpc-whitelist' => '127.0.0.1,192.168.1.*',
+'rpc-whitelist-enabled' => false,
'rpc-authentication-required' => false,
'incomplete-dir' => '/i/k/partial-torrents',
+'incomplete-dir-enabled' => true,
'download-dir' => '/i/k/torrents',
-"speed-limit-up" => 700,
+"speed-limit-up" => 800,
"speed-limit-up-enabled" => true,
-"ratio-limit" => 1.4000,
+"peer-port" => 61486,
+"cache-size-mb" => 256,
+"ratio-limit" => 5.0,
"ratio-limit-enabled" => true,
})) + "\n")
EOF
- sgo transmission-daemon
- ;;
- arch)
- # todo, setup it's config file & daemon
- pi transmission-cli
- ;;
- esac
-fi
-# adapted from /var/lib/dpkg/info/transmission-daemon.postinst
-if ! getent passwd debian-transmission > /dev/null; then
- case $distro in
- arch)
- s useradd \
- --system \
- --create-home \
- --home-dir /var/lib/transmission-daemon \
- --shell /bin/false \
- debian-transmission
- ;;
- *)
- s adduser --quiet \
- --system \
- --group \
- --no-create-home \
- --disabled-password \
- --home /var/lib/transmission-daemon \
- debian-transmission
+ # make sure its not enabled, not sure if this is needed
+ ser disable transmission-daemon
+ sgo transmission-daemon-nn
;;
- esac
-fi
+ # todo: others unknown
+ esac
+ fi
+
+ # adapted from /var/lib/dpkg/info/transmission-daemon.postinst
+ if ! getent passwd debian-transmission > /dev/null; then
+ case $distro in
+ arch)
+ s useradd \
+ --system \
+ --create-home \
+ --home-dir /var/lib/transmission-daemon \
+ --shell /bin/false \
+ debian-transmission
+ ;;
+ *)
+ s adduser --quiet \
+ --system \
+ --group \
+ --no-create-home \
+ --disabled-password \
+ --home /var/lib/transmission-daemon \
+ debian-transmission
+ ;;
+ esac
+ fi
# dunno why it's there, but get rid of it
case $HOSTNAME in
# only settings I set were
# hostname
# auto-connect
+# password
+
+
+# the password is randomly generated on first run
+rpc_pass=$(s ruby <<'EOF'
+require 'json'
+p = '/etc/transmission-daemon/settings.json'
+puts JSON.parse(File.read(p))["rpc-password"]
+EOF
+ )
+
for f in /home/*; do
d=$f/.config/transmission-remote-gtk
u=${f##*/}
s -u $u mkdir -p $d
- s -u $u dd of=$d/config.json <<'EOF'
+ s -u $u dd of=$d/config.json <<EOF
{
"profiles" : [
{
"profile-name" : "Default",
- "hostname" : "treetowl",
+ "hostname" : "transmission",
"rpc-url-path" : "/transmission/rpc",
"username" : "",
- "password" : "",
+ "password" : "$rpc_pass",
"auto-connect" : true,
"ssl" : false,
"timeout" : 40,
EOF
done
-case $distro in
- debian|ubuntu)
- pi-nostart openvpn
- # pi-nostart this doesnt seem to be good enough?
- ser disable openvpn@client
- ser disable openvpn
- ;;
- # suggests because we want the resolvconf package
- *) pi --install-suggests openvpn;;
-esac
-
pi wget
case $HOSTNAME in
tp|frodo)
0) : ;;
*)
# previously I had a more specific search, but dpkg
- # changed it's output as of 7/2016
+ # changed it\'s output as of 7/2016
if grep 'dependency problems' \
$log &>/dev/null; then
s apt-get -fy install
exit 1
fi
;;
-esac
-;;
-arch)
- pi google-chrome
- ;;
-esac
-;;
+ esac
+ ;;
+ arch)
+ pi google-chrome
+ ;;
+ esac
+ ;;
esac
# printer
esac
# general known for debian/ubuntu, not for fedora
+
+case $distro in
+ debian|ubuntu)
+ pi golang-go
+ # a bit of googling, and added settings to bashrc
+ go get -u github.com/mvdan/fdroidcl/cmd/fdroidcl
+ ;;
+ # others unknown
+esac
+
+
case $distro in
arch)
# cdrkit for cloud-init isos
bridge-utils dnsmasq qemu bind-tools
# otherwise we get error about accessing kvm module.
# seems like there might be a better way, but google was a bit vague.
- s sed -ri --follow-symlinks '/^ *user *=/d' /etc/libvirt/qemu.conf
+ s $sed -ri '/^ *user *=/d' /etc/libvirt/qemu.conf
echo 'user = "root"' | s tee -a /etc/libvirt/qemu.conf
# https://bbs.archlinux.org/viewtopic.php?id=206206
# # this should prolly go in the wiki
case $distro in
- debian|ubuntu) spa android-tools-adb/unstable ;;
+ debian|ubuntu) spa android-tools-adbd/unstable ;;
arch) spa android-tools ;;
# other distros unknown
esac
-case $distro in
- debian)
- if [[ `debian-archive` == testing ]]; then
- # has no unstable dependencies
- spa bitcoin-qt/unstable
- fi
- ;;
- # other distros unknown
-esac
+if [[ $HOSTNAME == treetowl ]]; then
+ case $distro in
+ debian)
+ if [[ `debian-archive` == testing ]]; then
+ # has no unstable dependencies
+ pi bitcoind/unstable
+ src=/a/opt/bitcoin/contrib/init/bitcoind.service
+ s cp $src /etc/systemd/system
+ p=/etc/bitcoin/bitcoin
+ dst=/etc/systemd/system/bitcoinjm.service
+ # jm for joinmarket
+ $sed -r "/^\s*ExecStart/s,${p}.conf,${p}jm.conf," $src \
+ >/etc/systemd/system/bitcoinjm.service
+
+ d=jm; jm=d # being clever for succinctness
+ for s in d jm; do
+ s $sed -ri "/^\s*\[Unit\]/a Conflicts=bitcoin${!s}.service" \
+ /etc/systemd/system/bitcoin${s}.service
+ done
+
+ ser daemon-reload
+
+ dir=/nocow/.bitcoin
+ s mkdir -p $dir
+ s chown -R bitcoin:bitcoin $dir
+ dir=/etc/bitcoin
+ s mkdir -p $dir
+ s chown -R root:bitcoin $dir
+ s chmod 750 $dir
+
+ # pruning decreases the bitcoin dir to 2 gb, keeps
+ # just the recent blocks. can\'t do a few things like
+ # import a wallet dump.
+ # pruning works, but people had to do
+ # some manual stuff in joinmarket. I dun need the
+ # disk space, so not bothering yet, maybe in a year or so.
+ # https://github.com/JoinMarket-Org/joinmarket/issues/431
+ #https://bitcoin.org/en/release/v0.12.0#wallet-pruning
+ #prune=550
+
+ f=$dir/bitcoin.conf
+ s dd of=$f <<EOF
+server=1
+rpcpassword=$(openssl rand -base64 32)
+rpcuser=$(openssl rand -base64 32)
+EOF
-# proprietary flash. going without for now
-# case $distro in
-# debian)
-# pi flashplugin-nonfree
-# esac
+ f2=$dir/bitcoinjm.conf
+ s cp $f $f2
+ s tee -a $f2 >/dev/null <<EOF
+# Joinmarket
+walletnotify=curl -sI --connect-timeout 1 http://localhost:62602/walletnotify?%s
+alertnotify=curl -sI --connect-timeout 1 http://localhost:62602/alertnotify?%s
+wallet=joinmarket.dat
+EOF
+ # dunno about sharing a wallet between multiple instances
+ # manually did, wallet.dat symlinked in /nocow/.bitcoin
+ sgo bitcoind
+ fi
+ ;;
+ # other distros unknown
+ esac
+ pi libsodium-dev python-pip
+ cd /a/opt/joinmarket
+ # using develop branch, as it seems to be mostly bug fixes,
+ # and this is quite new software.
+ # note: python3 does not work.
+ # has seg fault error due to some bug, but it still works
+ pip install -r requirements.txt || [[ $? == 139 ]]
+ # note, the target must exist ahead of time, or bitcoin
+ # just overwrites the link, and it's not happy with an empty file,
+ # so we have to create the wallet, then move and link it.
+ s lnf -T /q/bitcoin/wallet.dat /nocow/.bitcoin/wallet.dat
+ s lnf -T /q/bitcoin/joinmarket.dat /nocow/.bitcoin/joinmarket.dat
+ # not technically needed, but seems cleaner not to have
+ # symlinks be root owned unlike everything else
+ s chown -h bitcoin:bitcoin /nocow/.bitcoin/*
+
+ for var in rpcuser rpcpassword; do
+ u="$(s sed -rn "s/^$var=(.*)/\1/p" /etc/bitcoin/bitcoin.conf)"
+ # escape backslashes
+ u="${u//\\/\\\\\\\\}"
+ # escape commas
+ u="${u//,/\\,}"
+ sed -ri "s,^(rpc_${var#rpc}\s*=).*,\1 $u," joinmarket.cfg
+ done
+ sed -ri "s/^\s*(blockchain_source\s*=).*/\1 bitcoin-rpc/" joinmarket.cfg
+ fi
-case $distro in
- fedora)
- cd $(mktemp -d)
- wget http://tamacom.com/global/global-6.3.2.tar.gz
- ex global*
- cd global-6.3.2
- # based on https://github.com/leoliu/ggtags
- ./configure --with-exuberant-ctags=/usr/bin/ctags
- make
- s make install
- s pip install pygments
- ;;
- *)
- pi global
- ;;&
- arch)
- pi python2-pygments
- ;;
- debian|ubuntu)
- pi python-pygments
- ;;
-esac
-case $distro in
- debian)
- pi task-cinnamon-desktop
- # in settings, change scrolling to two-finger,
- # because the default edge scroll doesn\'t work.
- pu transmission-gtk
- ;;
- # others unknown
-esac
+ # proprietary flash. going without for now
+ # case $distro in
+ # debian)
+ # pi flashplugin-nonfree
+ # esac
-case $distro in
- arch) spa apg ;;
- # already in debian jessie
-esac
+ case $distro in
+ fedora)
+ cd $(mktemp -d)
+ wget http://tamacom.com/global/global-6.3.2.tar.gz
+ ex global*
+ cd global-6.3.2
+ # based on https://github.com/leoliu/ggtags
+ ./configure --with-exuberant-ctags=/usr/bin/ctags
+ make
+ s make install
+ s pip install pygments
+ ;;
+ *)
+ pi global
+ ;;&
+ arch)
+ pi python2-pygments
+ ;;
+ debian|ubuntu)
+ pi python-pygments
+ ;;
+ esac
+ case $distro in
+ debian)
+ pi task-cinnamon-desktop
+ # in settings, change scrolling to two-finger,
+ # because the default edge scroll doesn\'t work.
+ pu transmission-gtk
+ ;;
+ # others unknown
+ esac
-# note this failed running at the beginning of this file,
-# because no systemd user instance was running.
-# Doing systemd --user resulted in
-# Trying to run as user instance, but $XDG_RUNTIME_DIR is not set
+ case $distro in
+ arch) spa apg ;;
-if isdebian-testing; then
- # as of 7/2016, has no unstable deps, and is not in testing anymore.
- pi synergy/unstable
-else
- pi synergy
-fi
+ # already in debian jessie
+ esac
+
+
+
+
+ # note this failed running at the beginning of this file,
+ # because no systemd user instance was running.
+ # Doing systemd --user resulted in
+ # Trying to run as user instance, but $XDG_RUNTIME_DIR is not set
+
+ if isdebian-testing; then
+ # as of 7/2016, has no unstable deps, and is not in testing anymore.
+ pi synergy/unstable
+ else
+ pi synergy
+ fi
# case $distro in
# # ubuntu unknown. probably the same as debian, just check if the
########### misc stuff
+devs=()
+for dev in $(s btrfs fi show /boot | sed -nr 's#.*path\s+(\S+)$#\1#p'); do
+ devs+=($(devbyid $dev),)
+done
+devs[-1]=${devs[-1]%,} # jonied by commas
+
+# on grub upgrade, we get prompts unless we do this
+s debconf-set-selections <<EOF
+grub-pc grub-pc/install_devices multiselect ${devs[*]}
+EOF
+
+
+# the wiki backup script from ofswiki.org uses generic paths
+s lnf /p/c/machine_specific/li/mw_vars /root
+s lnf /k/backup/wiki_backup /root
s cedit /etc/goaccess.conf <<'EOF' || [[ $? == 1 ]]
# all things found from looking around the default config
EOF
-if [[ $HOSTNAME == treetowl ]] && ! sudo test -e /etc/openvpn/client.key; then
- /a/bin/vpn-setup/vpn-mk-client-cert dopub
-fi
-
-
case $distro in
debian|ubuntu)
case `debian-archive` in
s dd of=/etc/apt/preferences.d/unison-gtk <<'EOF'
Explanation: Allow unison-gtk to be upgraded
Package: unison-gtk
-Pin: release a=unstable
+Pin: release a=testing
Pin-Priority: 500
EOF
# dont think using testing is needed since I figured out how to
;;
esac
-# note, for jessie, it depends on a higher version of btrfs-tools
+# note, for jessie, it depends on a higher version of btrfs-tools.
+#
+# # disabled due to my patch being in btrbk
# case $distro in
# arch|debian|ubuntu) pi btrbk ;;
# # others unknown
# esac
cd /a/opt/btrbk
s make install
+spa pv # for progress bar when running interactively.
+if [[ $HOSTNAME == treetowl ]]; then
+ # backup/sync manually on others hosts for now.
+ sgo btrbk.timer
+ # note: to see when it was last run,
+ # ser list-timers
+fi
if [[ $HOSTNAME == treetowl ]] && [[ `debian-archive` != testing ]]; then
# fail2 ban is broken, with a workaround, per
# run "control userpasswords2", turn on automatic login.
# note: when changing devices, I just undefine, the create the vm again.
- s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
- --disk=/a/images/win10.qcow2,bus=virtio --vcpus 2 -r 4096 -w bridge=br0 \
- -n win10 --import --os-variant $variant --cpu host-model-only
-
- s virsh destroy win10
+ if [[ -e /nocow/user/vms/win10.qcow2 ]]; then
+ s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
+ --disk=/a/images/win10.qcow2,bus=virtio --vcpus 2 -r 4096 -w bridge=br0 \
+ -n win10 --import --os-variant $variant --cpu host-model-only
- # this one hasn\'t had the virtio fix done yet.
- s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
- --disk=/a/images/win7.qcow2 --vcpus 2 -r 4096 -w bridge=br0 \
- -n win7 --import --os-variant win7 --cpu host-model-only
- s virsh destroy win7
- # had a problem with --cpu host, so trying out
- # --cpu host-model-only
+ s virsh destroy win10
+ fi
+ if [[ -e /nocow/user/vms/win7.qcow2 ]]; then
+ # this one hasn\'t had the virtio fix done yet.
+ s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
+ --disk=/a/images/win7.qcow2 --vcpus 2 -r 4096 -w bridge=br0 \
+ -n win7 --import --os-variant win7 --cpu host-model-only
+ s virsh destroy win7
+ # had a problem with --cpu host, so trying out
+ # --cpu host-model-only
+ fi
fi
iankelling.org / git / distro-setup / blobdiff