#!/bin/bash -l
# Copyright (C) 2016 Ian Kelling
-# This program is under GPL v. 3 or later, see <http://www.gnu.org/licenses/>
+
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+
+# http://www.apache.org/licenses/LICENSE-2.0
+
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
errcatch
set -x
distro=$(distro-name)
pending_reboot=false
+sed="sed --follow-symlinks"
# template
case $distro in
htop
mailutils
nmon
+ rdiff-backup
ruby
ruby-rest-client
tree
vim
+ wcd
)
case $HOSTNAME in
*)
# universal packages
# swh-plugins is for karaoke pulsaudio filter.
+ # mutagen for pithos
simple_packages+=(
apache2
+ apache2-doc
+ apt-doc
+ apt-listchanges
+ aptitude-doc-en
+ bash-doc
+ binutils-doc
+ bind9-doc
bwm-ng
chromium
+ cpio-doc
+ cloc
+ cron
+ debconf-doc
duplicity
+ eclipse
evince
fdupes
+ feh
filelight
+ gawk-doc
+ gcc-doc
gdb
+ gdb-doc
+ git-doc
+ git-email
+ gitk
+ glibc-doc
+ goaccess
gnome-screenshot
+ i3lock
+ iproute2-doc
jq
+ linux-doc
locate
+ make-doc
+ manpages
+ manpages-dev
meld
+ mumble
+ nmap
offlineimap
p7zip
paprefs
+ parted-doc
pavucontrol
pdfgrep
+ perl-doc
pianobar
pidgin
- rdiff-backup
- slock
+ python3-doc
+ python3-mutagen
+ reportbug
+ sqlite3-doc
squashfs-tools
swh-plugins
+ tar-doc
tcpdump
transmission-remote-gtk
vlc
+ whois
)
+ spa $(apt-cache search ruby[.0-9]+-doc| awk '{print $1}')
;;
esac
+########### begin section including li ################
-########### begin section including lj ################
+case $distro in
+ debian)
+ if [[ `debian-archive` == testing ]]; then
+ pi acme-tiny
+ fi
+esac
case $distro in
fedora) spa unrar ;;
# no equivalent in other distros:
case $distro in
debian|ubuntu)
- pi apt-file aptitude
- s apt-file update
+ pi aptitude
+ if ! dpkg -s apt-file &>/dev/null; then
+ # this condition is just a speed optimization
+ pi apt-file
+ s apt-file update
+ fi
# for debconf-get-selections
spa debconf-utils
;;
# this says disabling the service, it will still get restarted
# but this script doesn't do anything on restart, so it should be fine
s dd of=/var/run/motd.dynamic if=/dev/null
- s update-rc.d motd disable
+ # stretch doesn't have initscripts pkg installed by default
+ if [[ $(debian-codename) == jessie ]]; then
+ s update-rc.d motd disable
+ fi
;;
ubuntu)
# this isn't a complete solution. It still shows me when updates are available,
# /usr/share/doc/unattended-upgrades# cat README.md
# /etc/apt/apt.conf.d/50unattended-upgrades
if isdebian; then
- debian-setup-auto-update
+ setup-debian-auto-update
fi
-# cron
-/a/bin/crons/all
-
+# we've got a few dependencies later on, so install them now.
+pi "${simple_packages[@]}"
+simple_packages=()
+# website setup
case $HOSTNAME in
lj|li)
- pi "${simple_packages[@]}"
case $HOSTNAME in
- lj) domain=iank.bid ;;
+ lj) domain=iank.bid; exit 0 ;;
li) domain=iankelling.org ;;
esac
- homepage-setup $domain
- s rld /a/h/_site/ /var/www/$domain/html
+ /a/h/setup.sh $domain
+ /a/h/build.rb
+
+ sudo -E /a/bin/mediawiki-setup/mw-setup-script
+ #$src/phab-setup
- curl https://$domain/git/?p=mediawiki-setup/.git;a=blob_plain;f=mw-setup-script;hb=HEAD | bash
- $src/phab-setup
+ pi-nostart mumble-server
+ s $sed -ri "s/^ *(serverpassword=).*/\1$(< /a/bin/bash_unpublished/mumble_pass)/" /etc/mumble-server.ini
+ sgo mumble-server
+ vpn-server-setup -d
+
+ sudo dd of=/etc/systemd/system/vpnmail.service <<EOF
+[Unit]
+Description=Turns on iptables mail nat
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+ExecStart=/a/bin/distro-setup/vpn-mail-forward start
+ExecStop=/a/bin/distro-setup/vpn-mail-forward stop
+
+[Install]
+WantedBy=openvpn.service
+EOF
+ ser daemon-reload
+ ser enable vpnmail.service
+ acme-tiny-wrapper mail.iankelling.org
+ # needed for li's local mail delivery. there might
+ # be a better way to do it that doesn't require disabling
+ # it during le verification, but whatever for now.
+ f=/etc/cron.daily/lets-encrypt-mail_iankelling_org
+ l="10.8.0.4 mail.iankelling.org"
+ tu /etc/hosts <<<"$l"
+ s sed -i '/^\s*sysv acme-tiny-wrapper/i sed -i /^10\.8\.0\.4/d /etc/hosts' $f
+ echo "echo $l >>/etc/hosts" | s tee -a $f
+ sgo openvpn
+ domain=cal.iankelling.org
+ acme-tiny-wrapper $domain
+ apache-site -f 10.8.0.4:5232 - $domain <<'EOF'
+#https://httpd.apache.org/docs/2.4/mod/mod_authn_core.html#authtype
+ <Directory "/var/www/cal.iankelling.org/html">
+ Options +FollowSymLinks +Multiviews +Indexes
+ AllowOverride None
+ AuthType basic
+ AuthName "Authentication Required"
+ # setup one time, with root:www-data, 640
+ AuthUserFile "/etc/caldav-htpasswd"
+ Require valid-user
+ </Directory>
+EOF
+ # nginx version of above would be:
+ # auth_basic "Not currently available";
+ # auth_basic_user_file /etc/nginx/caldav/htpasswd;
+
+
+ ########## begin pump.io setup ##########
+
+ # once pump adds a logrotation script, turn off nologger,
+ # and add
+ # "logfile": "/var/log/pumpio/pumpio.log",
+ #
+ s dd of=/etc/pump.io.json <<'EOF'
+{
+ "secret": "SECRET_REPLACE_ME",
+ "driver": "mongodb",
+ "params": { "dbname": "pumpio" },
+ "noweb": false,
+ "site": "pump.iankelling.org",
+ "owner": "Ian Kelling",
+ "ownerURL": "https://iankelling.org/",
+ "port": 8001,
+ "urlPort": 443,
+ "hostname": "pump.iankelling.org",
+ "nologger": true,
+ "datadir": "/home/pumpio/pumpdata",
+ "enableUploads": true,
+ "debugClient": false,
+ "disableRegistration": true,
+ "noCDN": true,
+ "key": "/home/pumpio/pump.iankelling.org-domain.key",
+ "cert": "/home/pumpio/pump.iankelling.org-chained.pem",
+ "address": "localhost",
+ "sockjs": false
+}
+EOF
+ s sed -i "s#SECRET_REPLACE_ME#$(cat /p/c/machine_specific/li/pump-secret)#" /etc/pump.io.json
+
+ # jessie\'s node is too old
+ # https://nodejs.org/en/download/package-manager/
+ curl -sL https://deb.nodesource.com/setup_6.x | sudo -E bash -
+ pi nodejs
+ cd /home/ian
+ rm -rf pump.io.git
+ git clone https://github.com/pump-io/pump.io.git
+ cd pump.io
+ # note: doing this or the npm install pump.io as root had problems.
+ npm install
+ npm run build
+ # normally, next command would be
+ # s npm install -g databank-mongodb
+ # but it\'s this until a bug in pump gets fixed
+ s npm install -g databank-mongodb@0.19.2
+ s useradd -m -s /bin/false pumpio
+ sudo -u pumpio mkdir -p /home/pumpio/pumpdata
+ # for testing browser when only listening to localhost,
+ # in the pump.io.json, set hostname localhost, urlPort 5233
+ #ssh -L 5233:localhost:5233 li
+ acme-tiny-wrapper -c /home/pumpio pump.iankelling.org
+
+ s mkdir -p /var/log/pumpio/
+ s chown pumpio:pumpio /var/log/pumpio/
+
+ apache-site -c /home/pumpio - pump.iankelling.org <<'EOF'
+# currently a bug in pump that we cant terminate ssl
+ SSLProxyEngine On
+ ProxyPreserveHost On
+ ProxyPass / https://127.0.0.1:8001/
+ ProxyPassReverse / https://127.0.0.1:8001/
+ # i have sockjs disabled per people suggesting that
+ # it won\'t work with apache right now.
+ # not sure if it would work with this,
+ # but afaik, this is pointless atm.
+ <Location /main/realtime/sockjs/>
+ ProxyPass wss://127.0.0.1:8001/main/realtime/sockjs/
+ ProxyPassReverse wss://127.0.0.1:8001/main/realtime/sockjs/
+ </Location>
+EOF
+
+ s dd of=/etc/systemd/system/pump.service <<'EOF'
+[Unit]
+Description=pump.io
+After=syslog.target network.target
+
+[Service]
+Type=simple
+User=pumpio
+Group=pumpio
+ExecStart=/home/ian/pump.io/bin/pump
+Environment=NODE_ENV=production
+# failed to find databank-mongodb without this.
+# I just looked at my environment variables took a guess.
+Environment=NODE_PATH=/usr/lib/nodejs:/usr/lib/node_modules:/usr/share/javascript
+
+[Install]
+WantedBy=multi-user.target
+EOF
+ ser daemon-reload
+ sgo pump
+ ########## end pump.io setup ############
+
+
+ ############# begin setup mastodon ##############
+
+ # https://store.docker.com/editions/community/docker-ce-server-debian?tab=description
+ pi software-properties-common
+ curl -fsSL https://download.docker.com/linux/debian/gpg | sudo apt-key add -
+ sudo add-apt-repository \
+ "deb [arch=amd64] https://download.docker.com/linux/debian \
+ $(lsb_release -cs) \
+ stable"
+ p update
+ pi docker-ce
+ sgo docker
+ # this may not be needed
+ ser start docker
+
+ curl -L https://github.com/docker/compose/releases/download/1.12.0/docker-compose-`uname -s`-`uname -m` | s dd of=/usr/local/bin/docker-compose
+ s chmod +x /usr/local/bin/docker-compose
+
+ # i subscrubed to https://github.com/docker/compose/releases.atom
+ # to deal with updates manually.
+
+ cd ~
+ i clone https://github.com/tootsuite/mastodon
+ cd mastodon
+ # https://github.com/tootsuite/mastodon/tree/v1.1.2
+ # subbed to atom feed to deal with updates
+ i co v1.1.2
+
+ # per instructions, uncomment redis/postgres persistence in docker-compose.yml
+ sed -i 's/^#//' docker-compose.yml
+
+ cat >.env.production <<'EOF'
+REDIS_HOST=redis
+REDIS_PORT=6379
+DB_HOST=db
+DB_USER=postgres
+DB_NAME=postgres
+DB_PASS=
+DB_PORT=5432
+
+LOCAL_DOMAIN=mast.iankelling.org
+LOCAL_HTTPS=true
+
+SINGLE_USER_MODE=true
+
+SMTP_SERVER=10.8.0.4
+SMTP_PORT=25
+SMTP_LOGIN=li
+SMTP_FROM_ADDRESS=notifications@mast.iankelling.org
+SMTP_DOMAIN=mast.iankelling.org
+SMTP_DELIVERY_METHOD=smtp
+EOF
+
+ for key in PAPERCLIP_SECRET SECRET_KEY_BASE OTP_SECRET; do
+ printf "%s=%s" $key "$(docker-compose run --rm web rake secret)" >>.env.production
+ done
+ s cat /etc/mailpass| while read -r domain port pass; do
+ if [[ $domain == mail.iankelling.org ]]; then
+ printf "SMTP_PASSWORD=%s" "$pass" >>.env.production
+ break
+ fi
+ done
+
+
+
+ docker-compose run --rm web rails assets:precompile
+
+ # docker daemon takes care of starting on boot.
+ docker-compose up -d
+
+ acme-tiny-wrapper mast.iankelling.org
+ s a2enmod proxy_wstunnel headers
+ apache-site -f 3000 - mast.iankelling.org <<'EOF'
+ ProxyPreserveHost On
+ RequestHeader set X-Forwarded-Proto "https"
+ ProxyPass /500.html !
+ ProxyPass /oops.png !
+ ProxyPass /api/v1/streaming/ ws://localhost:4000/
+ ProxyPassReverse /api/v1/streaming/ ws://localhost:4000/
+ ErrorDocument 500 /500.html
+ ErrorDocument 501 /500.html
+ ErrorDocument 502 /500.html
+ ErrorDocument 503 /500.html
+ ErrorDocument 504 /500.html
+EOF
+
+
+ ############### !!!!!!!!!!!!!!!!!
+ ############### manual steps:
+
+ # only following 2 people atm, so not bothering to figure out backups
+ # when mastodon has not documented it at all.
+ #
+ # fsf@status.fsf.org
+ # cwebber@toot.cat
+ # dbd@status.fsf.org
+ # johns@status.fsf.org
+
+ # sign in page is at https://mast.iankelling.org/auth/sign_in
+ # register as iank, then
+ # https://github.com/tootsuite/documentation/blob/master/Running-Mastodon/Administration-guide.md
+ # docker-compose run --rm web bundle exec rails mastodon:make_admin USERNAME=iank
+
+ ############# end setup mastodon ##############
+
+ pi bind9
echo "$0: $(date): ending now)"
exit 0
;;
esac
+
########### end section including li/lj ###############
+if [[ $HOSTNAME == treetowl ]]; then
+ # note, see bashrc for more documentation.
+ pi rss2email
+ s dd of=/etc/systemd/system/rss2email.service <<'EOF'
+[Unit]
+Description=rss2email
+After=multi-user.target
+
+[Service]
+User=ian
+Type=oneshot
+# about 24 hours of failures
+ExecStart=/a/bin/log-quiet/sysd-mail-once -288 rss2email r2e run
+EOF
+ s dd of=/etc/systemd/system/rss2email.timer <<'EOF'
+[Unit]
+Description=rss2email
+
+[Timer]
+# for initial run. required.
+OnActiveSec=30
+# for subsequent runs.
+OnUnitInactiveSec=300
+
+[Install]
+WantedBy=timers.target
+EOF
+ s systemctl daemon-reload
+ sgo rss2email.timer
+fi
+
+######### begin pump.io periodic backup #############
+if [[ $HOSTNAME == treetowl ]]; then
+ s dd of=/etc/systemd/system/pumpbackup.service <<'EOF'
+[Unit]
+Description=pump li backup
+After=multi-user.target
+
+[Service]
+User=ian
+Type=oneshot
+ExecStart=/a/bin/log-quiet/sysd-mail-once pump-backup /a/bin/distro-setup/pump-backup
+EOF
+ s dd of=/etc/systemd/system/pumpbackup.timer <<'EOF'
+[Unit]
+Description=pump li backup hourly
+
+[Timer]
+OnCalendar=hourly
+
+[Install]
+WantedBy=timers.target
+EOF
+ s systemctl daemon-reload
+ sgo pumpbackup.timer
+fi
+######### end pump.io periodic backup #############
case $distro in
- arch) pi syncthing ;;
- ubuntu|debian)
- # google led me here:
- # https://apt.syncthing.net/
- curl -s https://syncthing.net/release-key.txt | sudo apt-key add -
- s="deb http://apt.syncthing.net/ syncthing release"
- if [[ $(cat /etc/apt/sources.list.d/syncthing.list) != $s ]]; then
- echo "$s" | s dd of=/etc/apt/sources.list.d/syncthing.list
- p update
- fi
- pi syncthing
+ debian|ubuntu)
+ # suggests because we want the resolvconf package.
+ # todo: check other distros to make sure it\'s installed
+ pi-nostart --install-suggests openvpn
+ # pi-nostart does not disable
+ ser disable openvpn
;;
+ *) pi openvpn;;
esac
-# installed via f-droid
-# top right, actions, device id
-#
-# for installing on a remote comp:
-# ssh -L 8384:localhost:8384 -N frodo
-# went to http://localhost:8384/
-#
-# add folder to sync phone,
-# staggered file versioning would be my normal choice, but choose
-# trash can versioning for sake of space on phone, with
-# clean out after 7 days.
-#
-# did ser syncthing@ian start
-# then on phone, add device, hit bar code icon,
-# install bar code scanner.
+
+if private-host; then
+ vpn-mk-client-cert -n mail li
+ cn=$(s openssl x509 -noout -nameopt multiline -subject \
+ -in /etc/openvpn/client/mail.crt | \
+ sed -rn 's/^\s*commonName\s*=\s*(.*)/\1/p')
+ echo "ifconfig-push 10.8.0.4 255.255.255.0" | \
+ ssh root@li dd of=/etc/openvpn/client-config/"$cn"
+fi
+ser enable mailroute
+if [[ $HOSTNAME == treetowl ]]; then
+ # note, this will need to be changed when the mail/contacts host changes
+ sgo openvpn-client@mail
+ /a/bin/distro-setup/radicale-setup
+fi
+
+## android studio setup
+# this contains the setting for android sdk to point to
+# /a/opt/androidsdk, which is asked upon first run
+lnf /a/opt/.AndroidStudio2.2 ~
+# android site says it needs a bunch of packages for ubuntu,
+# but I googled for debian, and someone says you just need lib32stdc++6 plus the
+# jdk
+# https://pid7007blog.blogspot.com/2015/07/installing-android-studio-in-debian-8.html
+# see w.org for more android studio details
+spa lib32stdc++6 default-jdk
+
+
+if [[ $HOSTNAME == treetowl ]]; then
+ ############# begin syncthing setup ###########
+
+ # It\'s simpler to just worry about running it in one place for now.
+ # I assume it would work to clone it\'s config to another non-phone
+ # and just run it in one place instead of the normal having a
+ # separate config. I lean toward using the same config, since btrfs
+ # syncs between comps.
+ case $distro in
+ arch) pi syncthing ;;
+ ubuntu|debian)
+ # testing has relatively up to date packages
+ if ! isdebian-testing; then
+ # based on error when doing apt-get update:
+ # E: The method driver /usr/lib/apt/methods/https could not be found.
+ pi apt-transport-https
+ # google led me here:
+ # https://apt.syncthing.net/
+ curl -s https://syncthing.net/release-key.txt | sudo apt-key add -
+ s="deb http://apt.syncthing.net/ syncthing release"
+ if [[ $(cat /etc/apt/sources.list.d/syncthing.list) != $s ]]; then
+ echo "$s" | s dd of=/etc/apt/sources.list.d/syncthing.list
+ p update
+ fi
+ fi
+ pi syncthing
+ ;;
+ esac
+ lnf -T /w/syncthing /home/ian/.config/syncthing
+ sgo syncthing@ian # runs as ian
+
+ # these things persist in ~/.config/syncthing, which I save in
+ # /w/syncthing (not in /p, because syncthing should continue to
+ # run on home server even when using laptop as primary device)
+ # open http://localhost:8384/
+ # change listen address from default to tcp://:22001,
+ # this is because we do port forward so it doesn\'t have to use
+ # some external server, but the syncthing is broken for port forward,
+ # you get a message, something "like connected to myself, this should not happen"
+ # when connecting to other local devices, so I bump the port up by 1,
+ # based on
+ # https://forum.syncthing.net/t/connected-to-myself-should-not-happen/1763/19.
+ # Without this, it was being stuck syncing at 0%.
+ # Set gui username and password.
+ #
+ # install syncthing via f-droid,
+ # folder setting, turn off master folder (makes it read only).
+ # on phone, add device, click bar code icon
+ # on dekstop, top right, actions, device id
+ # after adding, notification will appear on desktop to confirm
+ #
+ # syncing folder. from phone to desktop: select desktop in the
+ # folder on phone\'s sync options, notification will appear in
+ # desktop\'s web ui within a minute. For the reverse, the
+ # notification will appear in android\'s notifications, you have to
+ # swipe down and tap it to add the folder. It won\'t appear in the
+ # syncthing ui, which would be intuitive, but don\'t wait for it
+ # there.
+ #
+ # On phone, set settings to run syncthing all the time, and
+ # show no notification.
+ #
+ # Folder versioning would make sense if I didn\'t already use btrfs
+ # for backups. I would choose staggered, or trash can for more space.
+ #
+ # if needed to install on a remote comp:
+ # ssh -L 8384:localhost:8384 -N frodo
+ # open http://localhost:8384/
+ #
+ # Note, the other thing i did was port forward port 22000,
+ # per https://docs.syncthing.net/users/firewall.html
+
+ ############# end syncthing setup ###########
+fi
+
# no equivalent in other distros:
####### misc packages ###########
-
-if [[ $HOSTNAME == frodo ]]; then
+if [[ $HOSTNAME == treetowl ]]; then
case $distro in
debian|ubuntu)
# note i had to do this, which is persistent:
EOF
s sysctl -p
- # some reason it doesn't seem to start automatically anyways
+ # some reason it doesn\'t seem to start automatically anyways
pi-nostart transmission-daemon
- # config file documented here, and it's the same config
- # for daemon vs client, so it's documented in the gui.
+
+ # the folder was moved here after an install around 02/2017.
+ # it contains runtime data,
+ # plus a simple symlink to the config file which it\'s
+ # not worth separating out.
+ s lnf -T /i/transmission-daemon /var/lib/transmission-daemon/.config/transmission-daemon
+ #
+ # config file documented here, and it\'s the same config
+ # for daemon vs client, so it\'s documented in the gui.
# https://trac.transmissionbt.com/wiki/EditConfigFiles#Options
+ #
+ # I originaly setup rpc-whitelist, but after using
+ # routing to a network namespace, it doesn\'t see the
+ # real source address, so it\'s disabled.
+ #
+ # Changed the cache-size to 256 mb, reduces disk use.
+ # It is a read & write cache.
+ #
s ruby <<'EOF'
require 'json'
p = '/etc/transmission-daemon/settings.json'
File.write(p, JSON.pretty_generate(JSON.parse(File.read(p)).merge({
-'rpc-whitelist' => '127.0.0.1,192.168.1.*',
+'rpc-whitelist-enabled' => false,
'rpc-authentication-required' => false,
'incomplete-dir' => '/i/k/partial-torrents',
+'incomplete-dir-enabled' => true,
'download-dir' => '/i/k/torrents',
-"speed-limit-up" => 700,
+"speed-limit-up" => 800,
"speed-limit-up-enabled" => true,
-"ratio-limit" => 1.4000,
+"peer-port" => 61486,
+"cache-size-mb" => 256,
+"ratio-limit" => 5.0,
"ratio-limit-enabled" => true,
})) + "\n")
EOF
- sgo transmission-daemon
- ;;
- arch)
- # todo, setup it's config file & daemon
- pi transmission-cli
+
+ # make sure its not enabled, not sure if this is needed
+ ser disable transmission-daemon
+ sgo transmission-daemon-nn
;;
+ # todo: others unknown
esac
fi
esac
fi
-# dunno why it's there, but get rid of it
+# dunno why it\'s there, but get rid of it
case $HOSTNAME in
li|lj) s rm -rf /home/linode ;;
esac
# only settings I set were
# hostname
# auto-connect
+# password
+
+
+# the password is randomly generated on first run
+rpc_pass=$(s ruby <<'EOF'
+require 'json'
+p = '/etc/transmission-daemon/settings.json'
+puts JSON.parse(File.read(p))["rpc-password"]
+EOF
+ )
+
for f in /home/*; do
d=$f/.config/transmission-remote-gtk
u=${f##*/}
s -u $u mkdir -p $d
- s -u $u dd of=$d/config.json <<'EOF'
+ s -u $u dd of=$d/config.json <<EOF
{
"profiles" : [
{
"profile-name" : "Default",
- "hostname" : "frodo",
+ "hostname" : "transmission",
"rpc-url-path" : "/transmission/rpc",
"username" : "",
- "password" : "",
+ "password" : "$rpc_pass",
"auto-connect" : true,
"ssl" : false,
"timeout" : 40,
EOF
done
-case $distro in
- debian|ubuntu)
- pi-nostart openvpn
- # pi-nostart this doesnt seem to be good enough?
- ser disable openvpn@client
- ser disable openvpn
- ;;
- # suggests because we want the resolvconf package
- *) pi --install-suggests openvpn;;
-esac
-
pi wget
case $HOSTNAME in
tp|frodo)
cd /a/opt
wget -nv -N https://dl.google.com/linux/direct/google-chrome-stable_current_amd64.deb
errallow
+ set -o pipefail
s dpkg -i google-chrome-stable_current_amd64.deb |& tee $log
code=$?
errcatch
case $code in
0) : ;;
*)
- if grep '^dpkg: dependency problems prevent configuration of' \
+ # previously I had a more specific search, but dpkg
+ # changed it\'s output as of 7/2016
+ if grep 'dependency problems' \
$log &>/dev/null; then
s apt-get -fy install
else
esac
# allow user to run vms, from debian handbook
for x in ian traci; do s usermod -a -G libvirt,kvm $x; done
-# bridge networking as user fails. google lead here, but it doesn't work:
+# bridge networking as user fails. google lead here, but it doesn\'t work:
# oh well, I give up.
# http://wiki.qemu.org/Features-Done/HelperNetworking
# s mkdir /etc/qemu
esac
# general known for debian/ubuntu, not for fedora
+
+case $distro in
+ debian|ubuntu)
+ pi golang-go
+ # a bit of googling, and added settings to bashrc
+ go get -u github.com/mvdan/fdroidcl/cmd/fdroidcl
+ ;;
+ # others unknown
+esac
+
+
case $distro in
arch)
# cdrkit for cloud-init isos
bridge-utils dnsmasq qemu bind-tools
# otherwise we get error about accessing kvm module.
# seems like there might be a better way, but google was a bit vague.
- s sed -ri '/^ *user *=/d' /etc/libvirt/qemu.conf
+ s $sed -ri '/^ *user *=/d' /etc/libvirt/qemu.conf
echo 'user = "root"' | s tee -a /etc/libvirt/qemu.conf
# https://bbs.archlinux.org/viewtopic.php?id=206206
# # this should prolly go in the wiki
case $distro in
- debian|ubuntu) spa android-tools-adb/unstable ;;
+ debian|ubuntu) spa android-tools-adbd/unstable ;;
arch) spa android-tools ;;
# other distros unknown
esac
-case $distro in
- debian)
- if [[ `debian-archive` == testing ]]; then
- # has no unstable dependencies
- spa bitcoin-qt/unstable
- fi
- ;;
- # other distros unknown
-esac
+if [[ $HOSTNAME == treetowl ]]; then
+ case $distro in
+ debian)
+ if [[ `debian-archive` == testing ]]; then
+ # has no unstable dependencies
+ pi bitcoind/unstable
+ src=/a/opt/bitcoin/contrib/init/bitcoind.service
+ s cp $src /etc/systemd/system
+ p=/etc/bitcoin/bitcoin
+ dst=/etc/systemd/system/bitcoinjm.service
+ # jm for joinmarket
+ $sed -r "/^\s*ExecStart/s,${p}.conf,${p}jm.conf," $src \
+ >/etc/systemd/system/bitcoinjm.service
+
+ d=jm; jm=d # being clever for succinctness
+ for s in d jm; do
+ s $sed -ri "/^\s*\[Unit\]/a Conflicts=bitcoin${!s}.service" \
+ /etc/systemd/system/bitcoin${s}.service
+ done
+
+ ser daemon-reload
+
+ dir=/nocow/.bitcoin
+ s mkdir -p $dir
+ s chown -R bitcoin:bitcoin $dir
+ dir=/etc/bitcoin
+ s mkdir -p $dir
+ s chown -R root:bitcoin $dir
+ s chmod 750 $dir
+
+ # pruning decreases the bitcoin dir to 2 gb, keeps
+ # just the recent blocks. can\'t do a few things like
+ # import a wallet dump.
+ # pruning works, but people had to do
+ # some manual stuff in joinmarket. I dun need the
+ # disk space, so not bothering yet, maybe in a year or so.
+ # https://github.com/JoinMarket-Org/joinmarket/issues/431
+ #https://bitcoin.org/en/release/v0.12.0#wallet-pruning
+ #prune=550
+
+ f=$dir/bitcoin.conf
+ s dd of=$f <<EOF
+server=1
+rpcpassword=$(openssl rand -base64 32)
+rpcuser=$(openssl rand -base64 32)
+EOF
-# proprietary flash. going without for now
-# case $distro in
-# debian)
-# pi flashplugin-nonfree
-# esac
+ f2=$dir/bitcoinjm.conf
+ s cp $f $f2
+ s tee -a $f2 >/dev/null <<EOF
+# Joinmarket
+walletnotify=curl -sI --connect-timeout 1 http://localhost:62602/walletnotify?%s
+alertnotify=curl -sI --connect-timeout 1 http://localhost:62602/alertnotify?%s
+wallet=joinmarket.dat
+EOF
+ # dunno about sharing a wallet between multiple instances
+ # manually did, wallet.dat symlinked in /nocow/.bitcoin
+ sgo bitcoind
+ fi
+ ;;
+ # other distros unknown
+ esac
+ pi libsodium-dev python-pip
+ cd /a/opt/joinmarket
+ # using develop branch, as it seems to be mostly bug fixes,
+ # and this is quite new software.
+ # note: python3 does not work.
+ # has seg fault error due to some bug, but it still works
+ pip install -r requirements.txt || [[ $? == 139 ]]
+ # note, the target must exist ahead of time, or bitcoin
+ # just overwrites the link, and it\'s not happy with an empty file,
+ # so we have to create the wallet, then move and link it.
+ s lnf -T /q/bitcoin/wallet.dat /nocow/.bitcoin/wallet.dat
+ s lnf -T /q/bitcoin/joinmarket.dat /nocow/.bitcoin/joinmarket.dat
+ # not technically needed, but seems cleaner not to have
+ # symlinks be root owned unlike everything else
+ s chown -h bitcoin:bitcoin /nocow/.bitcoin/*
+
+ for var in rpcuser rpcpassword; do
+ u="$(s sed -rn "s/^$var=(.*)/\1/p" /etc/bitcoin/bitcoin.conf)"
+ # escape backslashes
+ u="${u//\\/\\\\\\\\}"
+ # escape commas
+ u="${u//,/\\,}"
+ sed -ri "s,^(rpc_${var#rpc}\s*=).*,\1 $u," joinmarket.cfg
+ done
+ sed -ri "s/^\s*(blockchain_source\s*=).*/\1 bitcoin-rpc/" joinmarket.cfg
+
+fi
# because no systemd user instance was running.
# Doing systemd --user resulted in
# Trying to run as user instance, but $XDG_RUNTIME_DIR is not set
-case $distro in
- # ubuntu unknown. probably the same as debian, just check if the
- # init scripts come with the package.
- debian)
- # copied from arch, but moved to etc
- s dd of=/etc/systemd/user/synergys.service <<'EOF'
-[Unit]
-Description=Synergy Server Daemon
-After=network.target
-
-[Service]
-User=%i
-ExecStart=/usr/bin/synergys --no-daemon --config /etc/synergy.conf
-Restart=on-failure
-
-[Install]
-WantedBy=multi-user.target
-EOF
- s dd of=/etc/systemd/user/synergys.socket <<'EOF'
-[Unit]
-Conflicts=synergys@.service
-[Socket]
-ListenStream=24800
-Accept=false
+if isdebian-testing; then
+ # as of 7/2016, has no unstable deps, and is not in testing anymore.
+ pi synergy/unstable
+else
+ pi synergy
+fi
-[Install]
-WantedBy=sockets.target
-EOF
- ;;&
- *)
- pi synergy
- # taken from arch wiki.
- s dd of=/etc/systemd/system/synergyc@.service <<'EOF'
-[Unit]
-Description=Synergy Client
-After=network.target
+# case $distro in
+# # ubuntu unknown. probably the same as debian, just check if the
+# # init scripts come with the package.
+# debian)
+# # copied from arch, but moved to etc
+# s dd of=/etc/systemd/user/synergys.service <<'EOF'
+# [Unit]
+# Description=Synergy Server Daemon
+# After=network.target
+
+# [Service]
+# User=%i
+# ExecStart=/usr/bin/synergys --no-daemon --config /etc/synergy.conf
+# Restart=on-failure
+
+# [Install]
+# WantedBy=multi-user.target
+# EOF
+# s dd of=/etc/systemd/user/synergys.socket <<'EOF'
+# [Unit]
+# Conflicts=synergys@.service
-[Service]
-User=%i
-ExecStart=/usr/bin/synergyc --no-daemon treetowl
-Restart=on-failure
-# per man systemd.unit, StartLimitInterval, by default we
-# restart more than 5 times in 10 seconds.
-# And this param defaults too 200 miliseconds.
-RestartSec=3s
+# [Socket]
+# ListenStream=24800
+# Accept=false
-[Install]
-WantedBy=multi-user.target
-EOF
- case $HOSTNAME in
- frodo)
- ser enable synergyc@ian
- ser start synergyc@ian ||: # X might not be running yet
- systemctl --user start synergys ||:
- systemctl --user enable synergys
- ;;
- treetowl) systemctl --user enable synergys ;;
- esac
- ;;
-esac
+# [Install]
+# WantedBy=sockets.target
+# EOF
+# # had this fail with 'Failed to connect to bus: No such file or directory'
+# # then when I tried it manually, it worked fine...
+# if ! systemctl --user daemon-reload; then
+# sleep 2
+# echo retrying systemd user daemon reload
+# systemctl --user daemon-reload
+# fi
+# ;;&
+# *)
+# # taken from arch wiki.
+# s dd of=/etc/systemd/system/synergyc@.service <<'EOF'
+# [Unit]
+# Description=Synergy Client
+# After=network.target
+
+# [Service]
+# User=%i
+# ExecStart=/usr/bin/synergyc --no-daemon frodo
+# Restart=on-failure
+# # per man systemd.unit, StartLimitInterval, by default we
+# # restart more than 5 times in 10 seconds.
+# # And this param defaults too 200 miliseconds.
+# RestartSec=3s
+
+# [Install]
+# WantedBy=multi-user.target
+# EOF
+# s systemctl daemon-reload
+# case $HOSTNAME in
+# x2|treetowl)
+# ser enable synergyc@ian
+# ser start synergyc@ian ||: # X might not be running yet
+# ;;
+# frodo)
+# systemctl --user start synergys ||:
+# systemctl --user enable synergys
+# ;;
+# esac
+# ;;
+# esac
######### end misc packages #########
-# packages I once used before and liked, but don't want installed now for
+# packages I once used before and liked, but don\'t want installed now for
# various reasons:
# python-sqlite is used for offlineimap
# lxappearance python-sqlite dolphin paman dconf-editor
# -o on, turn on 4 hour period non-performance degrading testing.
# short test daily 2-3am, extended tests Saturdays between 3-4am:
sched="-s (S/../.././02|L/../../6/03)"
-s sed -i "s#^[[:space:]]*DEVICESCAN.*#\
-DEVICESCAN -a -o on -S on -n standby,q $sched\
+s sed -i --follow-symlinks "s#^[[:space:]]*DEVICESCAN.*#\
+DEVICESCAN -a -o on -S on -n standby,q $sched \
-m ian@iankelling.org -M exec /usr/local/bin/smart-notify#" /etc/smartd.conf
# in the default configuration of at least ubuntu 14.04, resolvconf is
# consulted first. This is often slower and undesirable, ie. local dns
# queries go from 0ms to 10+ or 100+ ms. To reverse the ordering, you
# can do:
-#sudo sed -i '/tun\*\|tap\*/d' /etc/resolvconf/interface-order
+#sudo sed -i --follow-symlinks '/tun\*\|tap\*/d' /etc/resolvconf/interface-order
# however, this breaks dns lookup for hosts on the openvpn lan.
# I can\'t figure out why hosts on the normal lan would not be
# broken under the default ordering, except the host I was
########### misc stuff
+devs=()
+for dev in $(s btrfs fi show /boot | sed -nr 's#.*path\s+(\S+)$#\1#p'); do
+ devs+=($(devbyid $dev),)
+done
+devs[-1]=${devs[-1]%,} # jonied by commas
+
+# on grub upgrade, we get prompts unless we do this
+s debconf-set-selections <<EOF
+grub-pc grub-pc/install_devices multiselect ${devs[*]}
+EOF
+
+
+# the wiki backup script from ofswiki.org uses generic paths
+s lnf /p/c/machine_specific/li/mw_vars /root
+s lnf /k/backup/wiki_backup /root
+
+s cedit /etc/goaccess.conf <<'EOF' || [[ $? == 1 ]]
+# all things found from looking around the default config
+# copied existing NCSA Combined Log Format with Virtual Host, plus %L
+log-format %^:%^ %h %^[%d:%t %^] "%r" %s %b "%R" "%u" %D
+time-format %H:%M:%S
+date-format %d/%b/%Y
+log-file /var/log/apache2/access.log
+color-scheme 2
+
+# tip: copy access.log files to a stretch host directory, then run
+# jessie's goaccess is too old for some options, and it\'s
+# not easily installed from a testing.
+# goaccess --ignore-crawlers -f <(cat *) -a -o html > x.html
+EOF
+
case $distro in
debian|ubuntu)
s dd of=/etc/apt/preferences.d/unison-gtk <<'EOF'
Explanation: Allow unison-gtk to be upgraded
Package: unison-gtk
-Pin: release a=unstable
+Pin: release a=testing
Pin-Priority: 500
EOF
# dont think using testing is needed since I figured out how to
;;
esac
-# not using it atm, and for jessie, it depends on a higher version of btrfs-tools
+# note, for jessie, it depends on a higher version of btrfs-tools.
+#
+# # disabled due to my patch being in btrbk
# case $distro in
# arch|debian|ubuntu) pi btrbk ;;
# # others unknown
# esac
+cd /a/opt/btrbk
+s make install
+spa pv # for progress bar when running interactively.
+if [[ $HOSTNAME == treetowl ]]; then
+ # backup/sync manually on others hosts for now.
+ sgo btrbk.timer
+ # note: to see when it was last run,
+ # ser list-timers
+fi
if [[ $HOSTNAME == treetowl ]] && [[ `debian-archive` != testing ]]; then
# fail2 ban is broken, with a workaround, per
;;
esac
-if [[ $HOSTNAME == frodo ]]; then
- tu /etc/exports <<'EOF'
-/k 192.168.1.0/24(rw,nohide,no_subtree_check,insecure)
-EOF
- s exportfs -rav
-fi
-
-if [[ -e /k/video ]]; then
+if [[ $HOSTNAME == treetowl ]]; then
# nohide = export filesystems mounted deeper than the export point
# fsid=0 makes this export the "root" export
# not documented in the man page, but this means
# 1. it can be mounted with a shorthand of server:/
# 2. exports that are subdirectories of this one will automatically be mounted
- tu /etc/exports '/i/video 192.168.1.0/24(rw,fsid=0,nohide,no_root_squash,async,no_subtree_check,insecure)'
+ tu /etc/exports <<'EOF'
+/k 192.168.1.0/24(rw,fsid=0,nohide,no_root_squash,async,no_subtree_check,insecure)
+EOF
s exportfs -rav
- showmount -e localhost
fi
-
e "$end_msg_var"
# run "control userpasswords2", turn on automatic login.
# note: when changing devices, I just undefine, the create the vm again.
- s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
- --disk=/a/images/win10.qcow2,bus=virtio --vcpus 2 -r 4096 -w bridge=br0 \
- -n win10 --import --os-variant $variant --cpu host-model-only
-
- s virsh destroy win10
-
- # this one hasn\'t had the virtio fix done yet.
- s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
- --disk=/a/images/win7.qcow2 --vcpus 2 -r 4096 -w bridge=br0 \
- -n win7 --import --os-variant win7 --cpu host-model-only
- s virsh destroy win7
- # had a problem with --cpu host, so trying out
- # --cpu host-model-only
-
+ if [[ -e /nocow/user/vms/win10.qcow2 ]]; then
+ s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
+ --disk=/a/images/win10.qcow2,bus=virtio --vcpus 2 -r 4096 -w bridge=br0 \
+ -n win10 --import --os-variant $variant --cpu host-model-only
+
+ s virsh destroy win10
+ fi
+
+ if [[ -e /nocow/user/vms/win7.qcow2 ]]; then
+ # this one hasn\'t had the virtio fix done yet.
+ s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
+ --disk=/a/images/win7.qcow2 --vcpus 2 -r 4096 -w bridge=br0 \
+ -n win7 --import --os-variant win7 --cpu host-model-only
+ s virsh destroy win7
+ # had a problem with --cpu host, so trying out
+ # --cpu host-model-only
+ fi
fi
-pi samba
-# note samba re-reads it's config every 1 minute
-case $distro in
- arch) s cp /etc/samba/smb.conf.default /etc/samba/smb.conf ;;
-esac
+if [[ $HOSTNAME == treetowl ]]; then
+ pi samba
+ # note samba re-reads it\'s config every 1 minute
+ case $distro in
+ arch) s cp /etc/samba/smb.conf.default /etc/samba/smb.conf ;;
+ esac
-# add 2 lines after workgroup option
-s sed -ri '/^\s*encrypt passwords\s*=/d' /etc/samba/smb.conf
-s sed -ri '/^\s*map to guest\s*=/d' /etc/samba/smb.conf
-s sed -i 's/\(\s*workgroup\s*=\).*/\1 WORKGROUP\n\tencrypt passwords = yes\n\tmap to guest = bad password/' /etc/samba/smb.conf
-# remove default homes section. not sharing that.
-s sed -ri '/^\s*\[homes\]/,/\s*\[/d' /etc/samba/smb.conf
+ # add 2 lines after workgroup option
+ s sed -ri --follow-symlinks '/^\s*encrypt passwords\s*=/d' /etc/samba/smb.conf
+ s sed -ri --follow-symlinks '/^\s*map to guest\s*=/d' /etc/samba/smb.conf
+ s sed -i --follow-symlinks 's/\(\s*workgroup\s*=\).*/\1 WORKGROUP\n\tencrypt passwords = yes\n\tmap to guest = bad password/' /etc/samba/smb.conf
+ # remove default homes section. not sharing that.
+ s sed -ri --follow-symlinks '/^\s*\[homes\]/,/\s*\[/d' /etc/samba/smb.conf
-if ! grep -xF '[public]' /etc/samba/smb.conf &>/dev/null; then
- s tee -a /etc/samba/smb.conf <<'EOF'
+ if ! grep -xF '[public]' /etc/samba/smb.conf &>/dev/null; then
+ s tee -a /etc/samba/smb.conf <<'EOF'
[public]
guest ok = yes
read only = no
- path = /kfrodo
+ path = /kr
EOF
-fi
+ fi
-case $distro in
- debian|ubuntu)
-# systemd claims it generates units from /etc/init.d, but it clearly doesn't
-# in debian. I have no idea how they are related. fuck debian right now. It's
-# not documented. samba has a systemd init file linked to /dev/null.
-# There's this https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=769714 which
-# claims samba's sub-services will be started automatically by systemd... it
-# didn't on install, wonder if it will on boot. It clued me in how to start
-# it manually though. Nothing in /usr/share/doc/samba, debian admin guide
-# says nothing about any of this. (this is in debian testing as of 4/2016).
-
-s /etc/init.d/samba start
-;;
- arch)
- sgo samba
- ;;
-esac
+ case $distro in
+ debian|ubuntu)
+ # systemd claims it generates units from /etc/init.d, but it
+ # clearly doesn\'t in debian. I have no idea how they are
+ # related. fuck debian right now. It\'s not documented. samba
+ # has a systemd init file linked to /dev/null. There\'s this
+ # https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=769714 which
+ # claims samba\'s sub-services will be started automatically by
+ # systemd... it didn\'t on install, wonder if it will on
+ # boot. It clued me in how to start it manually though. Nothing
+ # in /usr/share/doc/samba, debian admin guide says nothing about
+ # any of this. (this is in debian testing as of 4/2016).
+
+ s /etc/init.d/samba start
+ ;;
+ arch)
+ sgo samba
+ ;;
+ esac
+fi
tu /etc/hosts <<< "127.0.1.1 $(hostname).lan $(hostname)"
-
-rootdev=$(mount | sed -rn 's#^(\S+) on / .*#\1#p')
-s mkdir /mnt/root
-tu /etc/fstab <<< "$rootdev /mnt/root btrfs noatime,subvolid=0 0 0"
-mountpoint /mnt/root || s mount /mnt/root
-idev=$(mount | sed -rn 's#^(\S+) on /i .*#\1#p')
-if [[ $idev != $rootdev ]]; then
- s mkdir /mnt/iroot
- tu /etc/fstab <<< "$idev /mnt/iroot btrfs noatime,subvolid=0 0 0"
- mountpoint /mnt/iroot || s mount /mnt/iroot
-fi
-
-
######### begin stuff belonging at the end ##########