lots of fixes for trisquel flidas
[distro-setup] / distro-begin
index 9f232c558d6f91ae1480f0449a75c362fd2e0a4d..904bc7908efb4b3a9203ad8a40676922a6f1ffe1 100755 (executable)
@@ -30,7 +30,7 @@ sudo bash -c 'source /a/c/.bashrc && source /a/exe/ssh-emacs-setup'
 # set the scrollback to unlimited in case something goes wrong
 
 if [[ $EUID == 0 ]]; then
-    if getent passwd ian; then
+    if getent passwd iank || getent passwd ian ; then
         echo "$0: error: running as root. unprivileged user exists. use it."
         exit 1
     else
@@ -65,10 +65,10 @@ if [[ $1 ]]; then
     export HOSTNAME=$1
 fi
 
-for f in iank-dev htpc treetowl x2 frodo tp li lj demohost; do
+for f in iank-dev htpc treetowl x2 frodo tp li lj demohost kw; do
     eval "$f() { [[ $HOSTNAME == $f ]]; }"
 done
-has_p() { treetowl || x2 || frodo || tp || demohost; }
+has_p() { ! linode; } # when tp is tracis, then not tp either
 has_x() { ! linode; }
 linode() { lj || li; }
 has_btrfs() { ! linode; }
@@ -155,6 +155,7 @@ if isfedora; then
     sudo $sed -i 's/^Defaults *requiretty/#\0 # ian commented/' /etc/sudoers
     # turn on magic sysrq commands for this boot cycle
     echo 1 > sudo dd of=/proc/sys/kernel/sysrq
+    echo "kernel.sysrq = 1" > /etc/sysctl.d/90-sysrq.conf
     # selinux is not user friendly. Like, you enable samba, but you haven't run the magic selinux commands so it doesn't work
     # and you have no idea why.
     sudo $sed -i 's/^\(SELINUX=\).*/\1disabled/' /etc/selinux/config
@@ -165,8 +166,8 @@ fi
 # already ran for pxe installs, but used for vps & updates
 distro=$(distro-name)
 case $distro in
-    ubuntu|debian)
-        sudo bash -c ". /a/bin/fai/fai-wrapper && /a/bin/fai/fai/config/scripts/GRUB_PC/11-ian"
+    ubuntu|debian|trisquel)
+        sudo bash -c ". /a/bin/fai/fai-wrapper && /a/bin/fai/fai/config/scripts/GRUB_PC/11-iank"
         ;;
     *)
         sudo bash -c ". /a/bin/fai/fai-wrapper &&
@@ -174,10 +175,8 @@ case $distro in
         ;;
 esac
 
-if linode; then
-    sudo $sed -i '/^127\.0\.1\.1/d' /etc/hosts
-    echo "127.0.1.1 $HOSTNAME.lan $HOSTNAME" | sudo tee -a /etc/hosts
-fi
+sudo $sed -i '/^127\.0\.1\.1/d' /etc/hosts
+echo "127.0.1.1 $HOSTNAME.b8.nz $HOSTNAME" | sudo tee -a /etc/hosts
 
 
 if [[ $EUID == 0 ]]; then
@@ -206,9 +205,12 @@ $interactive || set -x
 
 
 # passwordless sudo
-tu /etc/sudoers <<'EOF'
-ian  ALL=(ALL)  NOPASSWD: ALL
+tu /etc/sudoers <<EOF
+$USER  ALL=(ALL)  NOPASSWD: ALL
 Defaults  env_keep += SUDOD
+# makes ubuntu be like debian
+# https://unix.stackexchange.com/a/91572
+Defaults always_set_home
 EOF
 
 
@@ -216,9 +218,9 @@ EOF
 isfedora && tu /etc/sysctl.conf 'kernel.sysrq = 1'
 
 
-if isdebian; then
-    codename=$(debian-codename)
+if isdeb; then
     if isdebian-stable && has_x; then
+        codename=$(debian-codename)
         s dd of=/etc/apt/sources.list.d/mozilla-iceweasel.list <<EOF
 deb http://mozilla.debian.net/ $codename-backports firefox-release
 deb-src http://mozilla.debian.net/ $codename-backports firefox-release
@@ -275,13 +277,9 @@ pi trash-cli
 ###### link files ###########
 # convenient to just do all file linking in one place
 
-# if it wasn't set already, we could set hostname here
-#echo treetowl | s dd of=/etc/hostname
-#s hostname -F /etc/hostname
-#HOSTNAME=$(hostname)
-
 
 s lnf -T /a/bin /b
+s lnf -T /nocow/t /t
 
 if has_p; then
     lnf -T /p/News ~/News
@@ -326,22 +324,24 @@ Pin-Priority: 500
 EOF
             fi
         fi
-        # for hosts which require nonfree drivers
-        # i previously had extra packages listed here linux-image-amd64
-        # firmware-linux-free linux-headers-amd64, but I
-        # don\'t see any reason why. seems to work in testing without.
-        # remove this note if it continues to work.
-        p=firmware-linux-nonfree
-        if apt-cache show $p &>/dev/null; then
-            pi $p
+        # # no hosts have nonfree firmware anymore, yay. but leaving commented,
+        # # as i might run into one for a little while still.
+        # p=firmware-linux-nonfree
+        # if apt-cache show $p &>/dev/null; then
+        #     pi $p
+        # fi
+        ;;&
+    trisquel|ubuntu)
+        if has_x; then
+            pi abrowser
         fi
         ;;&
-    ubuntu|debian)
+    trisquel|ubuntu|debian)
         if has_x; then
-            if isdebian-stable; then
-                pi xmacro
-            else
+            if isdebian-testing; then
                 pi xmacro/unstable # has no unstable deps
+            else
+                pi xmacro
             fi
             pi gtk-redshift xinput
         fi
@@ -505,17 +505,17 @@ EOF
         fi
 
         ;;&
-    ubuntu|debian|fedora)
+    ubuntu|trisquel|debian|fedora)
         if has_x; then
-            if isdebian-stable; then
-                pi xkbset
-            else
+            if isdebian-testing; then
                 # xkbset was in testing for quite a while, dunno
                 # why it\'s not anymore. Sometime I should check and
                 # see if it\'s back in testing, but the unstable package
                 # doesn\'t upgrade anything form testing, and it\'s tiny
                 # so I\'m not bothering to automate it.
                 pi xkbset/unstable
+            else
+                pi xkbset
             fi
         fi
         ;;&
@@ -538,7 +538,7 @@ fi
 
 dirs=(/mnt/{1,2,3,4,5,6,7,8,9})
 s mkdir -p "${dirs[@]}"
-s chown ian:ian  "${dirs[@]}"
+s chown $USER:$USER  "${dirs[@]}"
 
 
 tu /etc/fstab <<'EOF'
@@ -549,17 +549,17 @@ EOF
 
 if ! mountpoint /kr; then
     s mkdir -p /kr
-    s chown ian:traci /kr
+    s chown $USER:traci /kr
 fi
 
 if home_network; then
-    if [[ $HOSTNAME == treetowl ]]; then
+    if [[ $HOSTNAME == frodo ]]; then
         tu /etc/fstab <<'EOF'
 /k  /kr  none  bind,noauto  0 0
 EOF
     else
         tu /etc/fstab <<'EOF'
-treetowl:/k  /kr  nfs  noauto  0 0
+frodo:/k  /kr  nfs  noauto  0 0
 EOF
     fi
 fi
@@ -568,7 +568,7 @@ s mkdir -p /q /i/{w,k}
 for dir in /{i,w,k}; do
     if mountpoint $dir; then continue; fi # already mounted
     s mkdir -p $dir
-    s chown ian:ian $dir
+    s chown $USER:$USER $dir
 done
 
 # not needed for all hosts, but rather just keep it uniform
@@ -600,17 +600,17 @@ done
 EOF
     s chmod +x /root/imount
 
-    s dd of=/etc/systemd/system/imount.service <<'EOF'
+    s dd of=/etc/systemd/system/imount.service <<EOF
 [Unit]
 Description=Mount /i and related mountpoints
-RequiredBy=syncthing@ian.service
-Before=syncthing@ian.service
+Before=syncthing@$USER.service
 
 [Service]
 Type=oneshot
 ExecStart=/root/imount
 
 [Install]
+RequiredBy=syncthing@$USER.service
 # note /kr needs networking, this target is the simplest way to
 # time it when the network should be up, but not do something
 # dumb like delay startup until the network is up. It happens
@@ -637,7 +637,7 @@ if has_btrfs; then
 $first_root_crypt  /nocow  btrfs  noatime,subvol=nocow  0 0
 EOF
         s mkdir -p $dir
-        s chown ian:ian $dir
+        s chown $USER:$USER $dir
         s mount $dir
     fi
 else
@@ -648,7 +648,7 @@ fi
 # ownership, and ssh doesn\'t allow any group writable parent
 # directories, so we are forced to use a directory structure similar
 # to home directories
-s chown root:ian /q
+s chown root:$USER /q
 s chmod 755 /q
 
 
@@ -674,7 +674,7 @@ else
 fi
 
 if isubuntu; then
-    # disable crash report annoying crap
+    # disable crash report annoying dialogs.
     s dd of=/etc/default/apport <<<'enabled=0'
 fi
 
@@ -688,14 +688,16 @@ fi
 # E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)
 # E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
 sleep 1
+# todo: this is not idempotent, it fails when running twice, due to prepopulated values.
+# check into unsetting them using debconf-set-selection.
 s apt-get -y install --no-install-recommends expect
-s expect <<EOF
+s expect <<EOF ||:
 set force_conservative 0
 spawn dpkg-reconfigure tzdata -freadline
 expect -nocase timeout {exit 1} "Geographic area:"
-send "12\r"
+send "\02512\r"
 expect -nocase timeout {exit 1} "Time zone:"
-send "11\r"
+send "\0255\r"
 expect eof
 exit
 EOF
@@ -737,7 +739,7 @@ if has_x; then
         s mkdir -p $dir/PostLogin
         s command cp /a/bin/distro-setup/desktop-20-autostart.sh $dir/PostLogin/Default
         s mkdir /etc/lightdm/lightdm.conf.d
-        s dd of=/etc/lightdm/lightdm.conf.d/12-ian.conf <<'EOF'
+        s dd of=/etc/lightdm/lightdm.conf.d/12-iank.conf <<'EOF'
 [SeatDefaults]
 session-setup-script=/a/bin/distro-setup/desktop-20-autostart.sh
 EOF
@@ -777,11 +779,22 @@ EOF
     fi
     pi dmenu
 
-    if isdeb && (tp || x2); then
-        pi task-laptop
+    if tp || x2; then
+        case $distro in
+            debian)
+                pi task-laptop
+                ;;
+            ubuntu|trisquel)
+                # the exact packages that task-laptop would install, since ubuntu
+                # doesn\'t have this virtual in practice package.
+                pi avahi-autoipd bluetooth powertop iw wireless-tools wpasupplicant
+                ;;
+            # todo: other distros unknown
+        esac
     fi
 fi
 
 # the first pup command can kill off our /etc/ mod, so rerun this
 /a/exe/ssh-emacs-setup
 echo "$0: $(date): ending now"
+exit 0