-#!/bin/bash -l
+#!/bin/bash
+# Copyright (C) 2016 Ian Kelling
+
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+
+# http://www.apache.org/licenses/LICENSE-2.0
+
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
set -eE -o pipefail
trap 'echo "$0:$LINENO:error: \"$BASH_COMMAND\" returned $?" >&2' ERR
[[ $EUID == 0 ]] || exec sudo -E "$BASH_SOURCE" "$@"
+usage() {
+ echo "top of script file:"
+ sed -n '1,/^[# ]*end command line/{p;b};q' "$0"
+ exit $1
+}
+
+script_dir=$(dirname $(readlink -f "$BASH_SOURCE"))
+
+# todo: finish figuring out fai / distro-setup
+# initial fstab / subvol setup.
conf_only=false
-if [[ $1 == -c ]]; then
- # mostly for testing
- conf_only=true
+dry_run=false # mostly for testing
+resume_arg=
+
+temp=$(getopt -l help hcnrt: "$@") || usage 1
+eval set -- "$temp"
+while true; do
+ case $1 in
+ -c) conf_only=true; shift ;;
+ -n) dry_run=true; dry_run_arg=-n; shift ;;
+ -r) resume_arg=-r; shift ;;
+ -t) IFS=, targets=($2); shift 2 ;;
+ -h|--help) usage ;;
+ --) shift; break ;;
+ *) echo "$0: Internal error!" ; exit 1 ;;
+ esac
+done
+read primary <<<"$@"
+
+##### end command line parsing ########
+
+rsync-dirs() {
+ local host=$1
+ local path=$2
+ rsync $dry_run_arg -ahi --relative --delete "$path" "root@$host:/"
+}
+
+vol-conf() {
+ cat >>/etc/btrbk.conf <<EOF
+volume $vol
+EOF
+}
+sub-conf() {
+ cat >>/etc/btrbk.conf <<EOF
+subvolume $sub
+EOF
+}
+tg-conf() {
+ cat >>/etc/btrbk.conf <<EOF
+target send-receive ssh://$tg$vol/btrbk
+EOF
+}
+
+
+
+if ! which btrbk &>/dev/null; then
+ echo "$0: error: no btrbk binary found"
fi
-target_host=frodo
cat >/etc/btrbk.conf <<'EOF'
ssh_identity /root/.ssh/id_rsa
-transaction_syslog daemon
# so we only run one at a time
lockfile /var/lock/btrbk.lock
# default format of short does not accomidate hourly preservation setting
timestamp_format long-iso
-# background on timezones. with short/long, timestamps use local time.
-# for long, if your local time moves backwards, by moving timezones or
-# for an hour when daylight savings changes it, you will temporarily get
-# a more aggressive retention policy for the overlapping period, and
-# vice versa for the opposite timezone move. The alternative is using
-# long-iso, which puts timezone info into the timestamp, which means
-# that instead of shifting time, you shift the start of day/week/month
-# which is used for retention to your new local time, which means for
-# example, if you moved forward by 8 hours, the daily/weekly/monthly
-# retention will be 8 hours more aggressive since midnight is at a new
-# time, unless you fake the timzeone using the TZ env variable.
-# However, in the short term, there will be no inconsistencies.
-# I don't see any problem with shifting when the day starts for
-# retention, so I'm using long-iso.
# only make a snapshot if things have changed
snapshot_create onchange
# much less snapshots because I have less space on the
# local filesystem.
-snapshot_preserve 2h 2d
+#snapshot_preserve 2h 2d
+# for now, keeping them equal for simplicity sake
+snapshot_preserve 48h 14d 8w 24m
+snapshot_preserve_min 6h
+snapshot_dir btrbk
# so, total backups = ~89
target_preserve 48h 14d 8w 24m
# btrbk -l debug -v dryrun
EOF
+# note q is owned by root:1000
+# note p is owned 1000:1000 and chmod 700
+mountpoints=(/q)
+if awk '{print $2}' /etc/fstab | grep -xF /p &>/dev/null; then
+ mountpoints+=(/p)
+fi
+
+# if our mountpoints are from stale snapshots,
+# it doesn't make sense to do a backup.
+check-subvol-stale ${mountpoints[@]} || exit 1
+
+if [[ ! $targets ]]; then
+ case $HOSTNAME in
+ tp|x2)
+ if ! timeout -s 9 10 ssh frodo :; then
+ targets=($HOME_DOMAIN)
+ fi
+ ;;
+ esac
+ targets=(frodo)
+fi
-case $HOSTNAME in
- tp|x2)
- if ! timeout -s 9 10 ssh frodo :; then
- target_host=$HOME_DOMAIN
- cat >>/etc/btrbk.conf <<EOF
-ssh_port 2222
-EOF
- fi
- ;;
-esac
-if [[ $HOSTNAME != frodo ]]; then
- remote_target="target send-receive ssh://${target_host}/mnt/root/${HOSTNAME}-btrbk"
+# for i, we just do a 1 way sync from master to backup,
+# and manually manage any changes to that.
+do_i=false
+for tg in ${targets[@]}; do
+ # for an initial run, btrbk requires the dir to exist
+ ssh root@$tg mkdir -p /mnt/root/btrbk
+ if [[ $tg == frodo && $HOSTNAME == treetowl ]]; then
+ do_i=true
+ fi
+done
+
+
+vol=/mnt/root
+vol-conf
+for m in ${mountpoints[@]}; do
+ sub=${m##*/}
+ sub-conf
+ for tg in ${targets[@]}; do
+ tg-conf
+ done
+done
+
+if $do_i; then
+ vol=/mnt/iroot
+ vol-conf
+ sub=i
+ sub-conf
+ tg=frodo
+ vol=/mnt/root
+ tg-conf
fi
-target-section() {
- root=$1
- subvol=$2
- mountpoint $root &>/dev/null || return
- cat >>/etc/btrbk.conf <<EOF
-volume $root
-subvolume $subvol
-$remote_target
-EOF
-}
-target-section /mnt/iroot i
-target-section /mnt/root q
+# todo: umount first to ensure we don't have any errors
+# todo: do some kill fuser stuff to make umount more reliable
+# todo: run this on a systemd timer on $primary, once per hour,
+# and if primary is, change that timer over to primary, and make
+# sure we mount the latest
+
+
if $conf_only; then
exit
fi
-btrbk -q run
+if $dry_run; then
+ btrbk -n $resume_arg run
+else
+ # -q and just using the syslog option seemed nice,
+ # but it doesn't show when a send has a parent and when it doesn't.
+ btrbk $resume_arg run
+fi
+
+# if we have /p, rsync to targets without /p
+if mountpoint /p >/dev/null; then
+ for tg in ${targets[@]}; do
+ case $tg in
+ tp|li|lk)
+ for x in /p/c/machine_specific/*.hosts; do
+ if grep -qxF $tg $x; then
+ dir=${x%.hosts}
+ rsync-dirs $tg $dir
+ fi
+ done
+ ;;
+ esac
+ done
+fi
+
+if ! $dry_run; then
+ $script_dir/mount-latest-remote ${targets[@]}
+fi
+
+
+# todo: move variable data we don't care about backing up
+# to /nocow and symlink it.
+
+
+# background on btrbk timezones. with short/long, timestamps use local time.
+# for long, if your local time moves backwards, by moving timezones or
+# for an hour when daylight savings changes it, you will temporarily get
+# a more aggressive retention policy for the overlapping period, and
+# vice versa for the opposite timezone move. The alternative is using
+# long-iso, which puts timezone info into the timestamp, which means
+# that instead of shifting time, you shift the start of day/week/month
+# which is used for retention to your new local time, which means for
+# example, if you moved forward by 8 hours, the daily/weekly/monthly
+# retention will be 8 hours more aggressive since midnight is at a new
+# time, unless you fake the timzeone using the TZ env variable.
+# However, in the short term, there will be no inconsistencies.
+# I don't see any problem with shifting when the day starts for
+# retention, so I'm using long-iso.
+
+# note to create a long-iso timestamp: date +%Y%m%dT%H%M%S%z