HISTFILE=
c() { cd "$@"; }
elif [[ $HISTFILE ]]; then
- HISTFILE=$HOME/.bh
+ # use an alternate history file when we are streaming.
+ if [[ -e $HOME/.iank-stream-on ]]; then
+ HISTFILE=/a/bin/data/stream_hist
+ else
+ HISTFILE=$HOME/.bh
+ fi
fi
+# history personal
+hip() {
+ history -c
+ HISTFILE=$HOME/.bh
+ history -r
+}
+
+# history for streaming
+his() {
+ history -c
+ HISTFILE=/a/bin/data/stream_hist
+ history -r
+}
+
+
source /a/bin/distro-setup/path-add-function
path-add /a/exe
# add this with absolute paths as needed for better security
# s sshfs bu@$host:/bu/home/md /bu/mnt -o reconnect,ServerAliveInterval=20,ServerAliveCountMax=30 -o allow_other
edelayoff() {
- echo all >/etc/exim4/no-delay-eximids
+ echo all >/var/spool/exim4/gw/.no-delay-eximids
+ if [[ $EUID == 0 ]]; then
+ chown iank:iank /var/spool/exim4/gw/.no-delay-eximids
+ fi
}
edelayon() {
- echo >/etc/exim4/no-delay-eximids
+ echo >/var/spool/exim4/gw/.no-delay-eximids
+ if [[ $EUID == 0 ]]; then
+ chown iank:iank /var/spool/exim4/gw/.no-delay-eximids
+ fi
}
eqgo() {
local p a
# excluding emacs for now
#p=(/a/opt/{emacs-debian11{,-nox},mu,emacs} /a/bin /a/exe /a/h /a/c /p/c/machine_specific/vps{,.hosts})
- p=(/a/bin /a/exe /a/h /a/c /p/c/machine_specific/vps{,.hosts} /c/roles/prom_export/files/simple/usr/local/bin/fsf-install-node-exporter /a/opt/fpaste)
+ p=(
+ /a/bin /a/exe /a/h /a/c /p/c/machine_specific/vps{,.hosts}
+ /c/roles/prom_export/files/simple/usr/local/bin/fsf-install-node-exporter
+ /a/opt/fpaste
+ /p/c/user-specific/www-data/icecast-fsf{,-tech}-htpasswd
+ /p/c/icecast.xml
+ )
a="-ahviSAXPH --specials --devices --delete --relative --exclude-from=/p/c/li-rsync-excludes"
ret=0
for h in li je bk; do
dsign iankelling.org expertpathologyreview.com zroe.org amnimal.ninja
lipush
for h in li bk; do
- m ssh $h.b8.nz dnsup
+ m ssh iank@$h.b8.nz dnsup
done
}
bindpushb8() {
# 2023). However, in 2024-02, I ran a backup where a receiving machine
# had the wallet enabled and there was no error, so I don't know if this
# is still an issue or likely it is an inconsistent behavior.
+# Note: a pruned node won't allow for a wallet to be added, super lame
+# so i'm just not running a bitcoin node for now.
+# Error: Prune: last wallet synchronisation goes beyond pruned data. You
+# need to -reindex (download the whole blockchain again in case of
+# pruned node)
#
-# As a workaround, this function is for enabling the wallet when I want
-# to use it and leave it disabled otherwise.
-walleton() {
- local active
- active=false
- no_on=true
- if [[ ! $(readlink -f /var/lib/bitcoind/wallets) == /q/wallets ]]; then
- if systemctl --quiet is-active bitcoind; then
- if [[ -e /tmp/no-bitcoinon ]]; then
- no_on=true
- else
- if [[ $EUID == 0 ]]; then
- m install -T -o iank -g iank /dev/null /tmp/no-bitcoinon
- else
- m touch /tmp/no-bitcoinon
- fi
- fi
- active=true
- m ser stop bitcoind
- fi
- m s ln -s /q/wallets /var/lib/bitcoind
- sudo chown -h bitcoin:bitcoin /var/lib/bitcoind/wallets
- if $active; then
- m ser start bitcoind
- if ! $no_on; then
- m rm /tmp/no-bitcoinon
- fi
- fi
- fi
-}
-walletoff() {
- local active
- active=false
- no_on=true
- if [[ $(readlink -f /var/lib/bitcoind/wallets) == /q/wallets ]]; then
- if systemctl --quiet is-active bitcoind; then
- if [[ -e /tmp/no-bitcoinon ]]; then
- no_on=true
- else
- if [[ $EUID == 0 ]]; then
- m install -T -o iank -g iank /dev/null /tmp/no-bitcoinon
- else
- m touch /tmp/no-bitcoinon
- fi
- fi
- active=true
- m ser stop bitcoind
- else
- echo note: bitcoind not active
- fi
- m rm /var/lib/bitcoind/wallets
- if $active; then
- # note, starting bitcoin always fails, but it actually
- # succeeds. But this is strangely not consistent.
- m ser start bitcoind
- if ! $no_on; then
- m rm /tmp/no-bitcoinon
- fi
- fi
- fi
-}
#### end bitcoin related things
kdecd() { /usr/lib/x86_64-linux-gnu/libexec/kdeconnectd; }
-bat() {
+batp() {
cat /sys/class/power_supply/BAT0/capacity
}
# hosts is that it is for the User part, the IdentityFile part is
# redundant to *.b8.nz. Also note ${host}i, we only setup those for vpn hosts, but there is no harm in overspecifying here.
root_hosts+=($host ${host}i $host.b8.nz ${host}i.b8.nz)
+ # shellcheck disable=SC2004 # false positive
root_hosts_a[$host]=t # a for associative array
else
nonroot_hosts+=($host ${host}i)
b8_ip=$(dig +short b8.nz @iankelling.org | tail -1)
+ # if our dynamic ip updates broke, set manually, eg:
+ #b8_ip=72.74.193.xxx
if [[ ! $b8_ip ]]; then
echo "$0: error: got empty b8.nz ip. returning 1"
return 1
fi
{
- echo "@ A $b8_ip"
+ cat <<EOF
+@ A $b8_ip
+i A $b8_ip
+EOF
for host in ${!nonvpn_ips[@]}; do
ipsuf=${nonvpn_ips[$host]}
echo "$host A 10.2.0.$ipsuf"
${host}wg A 10.8.0.$ipsuf
${host}vp A 10.5.5.$ipsuf
${host}tr A 10.174.$ipsuf.2
-${host}i A $b8_ip
+${host}i CNAME i.b8.nz.
EOF
done
} | cedit -e vpn-ips-update /p/c/machine_specific/vps/bind-initial/db.b8.nz
unset "portfw_ips[$i]"
fi
- ip=$(getent ahostsv4 "$i$suf_from_here" | awk '{ print $1 }' | head -n1) ||:
+ # note this might be outdated until we do a dns push
+ ip=$(dig +short "$i$suf_from_here" @iankelling.org | tail -n1) ||:
if [[ ! $ip ]]; then
if [[ $suf == .office.fsf.org ]]; then
suf_from_here=wg.b8.nz
ip=$(getent ahostsv4 "$i$suf_from_here" | awk '{ print $1 }' | head -n1) ||:
fi
- if [[ ! $ip ]]; then
- echo error: failed to get ip of "$i$suf_from_here"
- return 1
- fi
fi
- ip_to_hosts[$ip]+=" $i"
+ if [[ $ip ]]; then
+ ip_to_hosts[$ip]+=" $i"
+ else
+ echo error: failed to get ip of "$i$suf_from_here"
+ fi
done
for ip in "${!ip_to_hosts[@]}"; do
chmod +x $out
}
-smeld() { # ssh meld usage host1 host2 file
+# ssh meld. usage: host1 host2 file
+smeld() {
meld <(ssh $1 cat $3) <(ssh $2 cat $3)
}
+# remote file meld
+# usage: host file1 file2
+rmeld() {
+ local tmpdir
+ tmpdir=$(mktemp -d)
+ scp "$1:$2" "$1:$3" $tmpdir
+ meld "$tmpdir/${2##*/}" "$tmpdir/${3##*/}"
+}
+
+
spd() {
PATH=/usr/local/spdhackfix:$PATH command spd "$@"
}
s nmtui-connect "$@"
}
+# check exim and others network namespace
mailnncheck() {
- local unit pid ns mailnn
+ local unit pid ns mailnn spamd_ser
+
+ spamd_ser=spamd
+ if systemctl cat spamassassin &>/dev/null; then
+ spamd_ser=spamassassin
+ fi
+
# mailvpn would belong on the list if using openvpn
- for unit in mailnn unbound dovecot spamassassin exim4 radicale; do
+ for unit in mailnn unbound dovecot $spamd_ser exim4 radicale; do
pid=$(servicepid $unit)
echo debug: unit=$unit pid=$pid
if [[ ! $pid ]]; then
}
electrum() {
+ # Running the appimage said fuse was not available, but try
+ # running the appimage with --appimage-extract, which worked.
+ # It seems there is no need to backup the wallet, it can be restored
+ # via the seed onto any computer that needs it.
+ /a/opt/electrum/squashfs-root/AppRun "$@"
+
+
+ # This was an old way I ran electrum over tor, and seems like I
+ # imported a bitcoin core wallet.
+ #
# https://electrum.readthedocs.io/en/latest/tor.html
# https://github.com/spesmilo/electrum-docs/issues/129
- s rsync -ptog --chown bitcoin:bitcoin ~/.Xauthority /var/lib/bitcoind/.Xauthority
- sudo -u bitcoin DISPLAY=$DISPLAY XAUTHORITY=/var/lib/bitcoind/.Xauthority /a/opt/electrum-4.2.1-x86_64.AppImage -p socks5:localhost:9050
+ # s rsync -ptog --chown bitcoin:bitcoin ~/.Xauthority /var/lib/bitcoind/.Xauthority
+ # sudo -u bitcoin DISPLAY=$DISPLAY XAUTHORITY=/var/lib/bitcoind/.Xauthority /a/opt/electrum-4.2.1-x86_64.AppImage -p socks5:localhost:9050
+
}
+
+
monero() {
sudo -u bitcoin DISPLAY=$DISPLAY XAUTHORITY=/var/lib/bitcoind/.Xauthority /a/opt/monero-gui-v0.17.3.2/monero-wallet-gui
}
rg "$@" /p/w.org /a/t.org /a/work.org /b
}
-# re all my files more expansively
+# re all my files more expansively.
+# usage [-OPT...] regex space combined
rem() {
local paths
+ local -a opts
+ for arg; do
+ if [[ $arg == -* ]]; then
+ opts+=("$1")
+ shift
+ else
+ break
+ fi
+ done
paths="/p/c /b/"
find $paths -not \( -name .svn -prune -o -name .git -prune \
-o -name .hg -prune -o -name .editor-backups -prune \
-o -name .undo-tree-history -prune \) 2>/dev/null | grep -iP --color=auto -- "$*" ||:
- rgv $local_rgv_args -g "!bash_unpublished" -- "$*" $paths /a/work.org ||:
+ rgv $local_rgv_args -g "!bash_unpublished" "${opts[@]}" -- "$*" $paths /a/work.org ||:
}
reml() { # rem with limit to 5 matches per file
local_rgv_args="-m 5"
ffg() { /nocow/t/ffmpeg-release/ffmpeg-7.0.1/tools/graph2dot -o /tmp/g.tmp && dot -Tpng /tmp/g.tmp -o /tmp/g.png && feh /tmp/g.png; }
+firefox-hide-tabs() {
+
+ # without this, make tabs smaller by setting browser.uidensity 1 in about:config
+
+ profiledir=$1
+ [[ $1 ]] || return 1
+ # Related: the sidebery extension is useful.
+
+ # This is from
+ # https://raw.githubusercontent.com/MrOtherGuy/firefox-csshacks/master/chrome/hide_tabs_toolbar.css
+
+ ainsl $profiledir/chrome/userChrome.css '#TabsToolbar{ visibility: collapse !important }'
+
+}
+
+# kill lease on cmc
+klease() {
+ local tmpdir ret out
+ ret=0
+ out=$(ssh cmc dnsmasq-end-lease "$1" 2>&1) || ret=1
+ printf "%s\n" "$out"
+ if [[ $out == *"try diffing"* ]]; then
+ tmpdir=$(mktemp -d)
+ m scp cmc:/tmp/dhcp.leases cmc:/tmp/dhcp.leases.iank $tmpdir
+ m diff $tmpdir/dhcp.leases $tmpdir/dhcp.leases.iank ||:
+ rm -rf $tmpdir
+ fi
+ return $ret
+}
+
+# ffs and switch the bash history on this terminal.
+ffs() {
+ local last
+ last="${*: -1}"
+ if [[ $last && $last != -* && $last != sysops ]]; then
+ his
+ fi
+ command ffs "$@"
+}
+
+i3gen() {
+ /b/ds/i3-sway/gen
+}
+
export BASEFILE_DIR=/a/bin/fai-basefiles
#export ANDROID_HOME=/a/opt/android-home
iankelling.org / git / distro-setup / blobdiff