+# This file is part of Ian Kelling's automated-distro-installer
+# Copyright (C) 2024 Ian Kelling
+
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
PXE install w multi-boot, btrfs & Libreboot support
Some things are specific to my home network, and uses files with secrets
use one called 51-multi-boot, which you can see example of in
fai/config/class/50-host-classes.
-
-
Before doing a fai install, you will need to populate /q/root/luks and
/q/root/shadow, see their references. You might also want to copy
existing /etc/ssh/*host* to
/p/c/machine_specific/HOST/filesystem/etc/ssh
host-* luks keyfiles generated like:
-head -c 2048 /dev/urandom | od | s dd of=/q/root/luks/host-demohost
+h=demohost; head -c 2048 /dev/urandom | od | se dd of=/q/root/luks/host-$h
Configuration of which luks key to use is in
fai/config/hooks/partition.DEFAULT
and which shadow file / luks file(s) to copy into the new machine depends
on fai-redep arguments.
+Also, setup dns in /p/c/host-info and firewall redirects in wrt-setup-local.
+
+After install, btrbk to setup data, and then distro-begin && distro end.
+See notes in distro-begin for other configuration.
+
+# Per distro install/config
+
+./fai/config/package_config/CLASS.gpg
+
+# Prerequesites:
+
+<https://savannah.nongnu.org/git/?group=bash-bear-trap>
+git clone https://git.savannah.nongnu.org/git/bash-bear-trap.git
+sudo install -T bash-bear-trap/bash-bear /usr/local/lib/bash-bear
+
+
# Scripts (meant to be used directly):
mymk-basefile # Create basefiles for various distros
archlike-pxe # Setup pxe boot server from an archlike base image
-fai-redep # Deploy fai configuration to host "faiserver"
+fai-redep # Deploy fai configuration to host "faiserver.b8.nz"
faiserver-uninstall # uninstall fai-server
faiserver-setup # install fai-server on the current machine
-myfai-chboot # setup fai tftp and nfs. useful for doing pxe-kexec
+myfai-chboot # setup fai tftp and nfs. useful for doing pxe-kexec or booting from a fai-cd.
pxe-server # disable/enable pxe dhcp, tfp, and nfs. calls myfai-chboot
wrt-setup # setup my router in general: dhcp, dns, etc.
solution: if running from fai-cd, recreate autodiscover cd as noted above in setup.
+## Weird package dependency errors
+
+for example: in fai.log, within instsoft.DEBIAN
+```
+The following packages have unmet dependencies:
+ libc6 : Breaks: locales (< 2.36) but 2.35-0ubuntu3.7+11.0trisquel1 is to be installed
+```
+
+In this case, it was because the basefile was missing, and so instead
+fai decided to use the wrong basefile.
+
+for example: in fai.log, within instsoft.DEBIAN
+
+```
+ftar: No matching class found in /var/lib/fai/config/basefiles//
+ftar: extracting /var/tmp/base.tar.zst to /target/
+```
+
# What good logs look like:
logging nfs traffic from server
This is from parted -m $d unit MiB print.
It happens when there are no partitions yet.
-# linode notes
+
+######## notes on creating a lan with just 2 computers ########
+
+
+## below assumes eth0 is the ethernet device used to connect to the target computer.
+
+
+# this is not strictly needed. I had my connection die at some point,
+# and I suspected this might help.
+# based on
+# https://support.qacafe.com/knowledge-base/how-do-i-prevent-network-manager-from-controlling-an-interface/
+cat > /etc/NetworkManager/conf.d/99-fai-tmp.conf <<'EOF'
+[main]
+plugins=keyfile
+
+[keyfile]
+unmanaged-devices=interface-name:eth0
+EOF
+ser restart NetworkManager
+
+
+cat >> /etc/network/interfaces <<'EOF'
+iface eth0 inet static
+address 10.0.44.1/24
+EOF
+
+ifup eth0
+
+# note turn off fsf vpn, so route to coresite is the normal route.
+echo 1 > /proc/sys/net/ipv4/ip_forward
+m s iptables -t nat -A POSTROUTING -o $(ip -4 route get 8.8.8.8 | sed -nr 's,^.* dev\s+(\S+).*,\1,p') -j MASQUERADE
+
+
+change /p/c/machine_specific/vps/bind-initial/db.b8.nz
+faiserver 10.0.44.1
+TARGET_HOSTNAME 10.0.44.2
+
+apt install isc-dhcp-server
+
+cat >> /etc/default/isc-dhcp-server <<'EOF'
+INTERFACESv4="eth0"
+EOF
+
+edit ./dhcpd.conf to change mac address and target host name.
+
+s cp /b/fai/dhcpd.conf /etc/dhcp/
+ser restart isc-dhcp-server
+
+edit /a/bin/fai/fai/config/class/51-multi-boot
+
+pxe-server -d TARGET fai
+
+Then do a pxe boot on the target host
+
+
+
+##### linode notes ######
* create 2 disks, installer (3000 mb, raw), boot (remaining, raw)
* create 2 profiles w direct boot, no helpers:
settings.
-# ubuntu notes
+
+###### ubuntu notes ######
For someone who really needed ubuntu on host tp, otherwise they would
end up on a non-gnu os, and I didn't want to figure out how to get all