-# to debug
-#set -x
-# redirect output to log file
-#exec 1>/a/tmp/bashlog
-#exec 2>/a/tmp/bashlog
+# Copyright (C) 2016 Ian Kelling
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
-# By default this file is sourced for all ssh commands. This is wonky.
-# Normally, this file is not sourced when a script is run, and it would be much
-# better and more consistent if that also happened when when running a script
-# over ssh. so here we test for conditions of a script under ssh and return if
-# so. we can override with ssh -t which sets $SSH_TTY, which we can detect
-# But inside a script, ssh -t won't work, because we aren't using a tty at all.
-# So we need something else. Command lines and env variables sent across ssh are strictly limited.
-# We could override an obscure unused LC_var, like telephone, or we could transfer a file.
-# But I choose to set SendEnv and AcceptEnv ssh vars for BASH_LOGIN_SHELL.
-# In a private file, i have aliases for if $- == *i*, ssh -t, else ssh.
+# http://www.apache.org/licenses/LICENSE-2.0
-[[ $- != *i* && ! $SSH_CONNECTION ]] && export BASH_LOGIN_SHELL=true
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# to debug
+#set -x
+# redirect output to log file. this doesn't work. todo figure out why
+#exec 1>>/a/tmp/bashlog
+#exec 2>>/a/tmp/bashlog
+
+
+# By default this file is sourced for ALL ssh commands. This is wonky.
+# Normally, this file is not sourced when a script is run, but we can
+# override that by having #!/bin/bash -l. I want something similar for ssh
+# commands. when a local script runs an ssh command, this file should not be
+# sourced by default, but we should be able to override that.
+#
+# so here we test for conditions of a script under ssh and return if so. To test
+# for an overriding condition, we have a few options. one is to use an
+# environment variable. env variables sent across ssh are strictly limited. ssh
+# -t which sets $SSH_TTY, but within a script that won't work because tty
+# allocation will fail. We could override an obscure unused LC_var, like
+# telephone, but I don't want to run into some edge case where that messes
+# things up. we could transfer a file which we could test for, but I can't think
+# of a way to make that inherently limited to a single ssh command. I choose to
+# set SendEnv and AcceptEnv ssh config vars to allow the environment variable
+# BASH_LOGIN_SHELL to propagate across ssh.
+
+# assume we want ssh commands to source this file if we are sourcing it,
+# and we haven't specified otherwise already
+[[ ! $BASH_LOGIN_SHELL ]] && export BASH_LOGIN_SHELL=true
+#BASH_LOGIN_SHELL=false # temporary override
+
+# first conditions show that we are an ssh command without an interactive shell
if [[ $SSH_CONNECTION ]] \
- && [[ $- == *c* ]] \
- && [[ ! $SSH_TTY ]] \
- && [[ ! $BASH_LOGIN_SHELL == true ]] \
- && [[ $- != *i* ]]; then
+ && [[ $- == *c* ]] \
+ && [[ ! $SSH_TTY ]] \
+ && [[ $- != *i* ]] \
+ && [[ ! $BASH_LOGIN_SHELL == true ]]; then
return
+else
+ source /etc/profile
fi
-# Side note on ssh.
-
-
-
-###################
-## include files ###
-###################
-
-for x in $HOME/bin/bash-programs-by-ian/repos/*/*-function; do
- source "$x"
-done
-source $HOME/bin/semi-private # so I can share my bashrc
-source $HOME/path_add-function
+# note, to catch errors in functions but not outside, do:
+# set -E -o pipefail
+# trap return ERR
+# trap 'trap ERR' RETURN
# settings #
############
-CDPATH=.:/a
+CDPATH=.
+
+set -o pipefail
+
+# remove all aliases. aliases provided by the system tend to get in the way,
+# for example, error happens if I try to define a function the same name as an alias
+unalias -a
# remove gnome keyring warning messages
# there is probably a more proper way, but I didn't find any easily on google
-unset GNOME_KEYRING_CONTROL
-
-path_add /a/opt/adt-bundle*/tools /a/opt/adt-bundle*/platform-tools
+# now using xfce+xmonad instead of vanilla xmonad, so disabling this
+#unset GNOME_KEYRING_CONTROL
-#use extra globing features. See man bash, search extglob.
+# use extra globing features.
shopt -s extglob
-#include .files when globbing.
-shopt -s dotglob
-
-# disabled because it is broken with bash_completion package. It is a known bug they hope to fix.
-# When a glob expands to nothing, make it an empty string instead of the literal characters.
-# shopt -s nullglob
+# include .files when globbing, but ignore files name . and ..
+# setting this also sets dotglob.
+# Note, this doesn't work in bash 4.4 anymore, for paths with
+# more than 1 directory, like a/b/.foo, since * is fixed to not match /
+export GLOBIGNORE=*/.:*/..
+
+# broken with bash_completion package. Saw a bug for this once. Don't anymore.
+# still broken in wheezy
+# still buggered in latest stable from the web, version 2.1
+# perhaps its fixed in newer git version, which fails to make for me
+# this note is from 6-2014.
+# Also, enabling this before sourcing .bashrc makes PATH be empty.
+#shopt -s nullglob
# make tab on an empty line do nothing
shopt -s no_empty_cmd_completion
-
# advanced completion
# http://bash-completion.alioth.debian.org/
-# i was using the git version for a while for a bug fix.
-# it's made it into distros now
-# usually this is sourced by the system already,
-# but I check just incase
+# might be sourced by the system already, but I've noticed it not being sourced before
if ! type _init_completion &> /dev/null && [[ -r "/usr/share/bash-completion/bash_completion" ]]; then
. /usr/share/bash-completion/bash_completion
fi
+
# fix spelling errors for cd, only in interactive shell
shopt -s cdspell
# append history instead of overwritting it
shopt -s checkwinsize
# attempt to save multiline single commands as single history entries.
shopt -s cmdhist
+# enable **
+shopt -s globstar
+
# inside emacs fixes
-if [[ $INSIDE_EMACS ]]; then
- export INSIDE_EMACS
+if [[ $RLC_INSIDE_EMACS ]]; then
+ # EMACS is used by bash on startup, but we don't need it anymore.
+ # plus I hit a bug in a makefile which inherited it
+ unset EMACS
+ export RLC_INSIDE_EMACS
export PAGER=cat
export MANPAGER=cat
- # for readline-complete.el
- stty echo
+ # scp completion does not work, but this doesn't fix it. todo, figure this out
+ complete -r scp &> /dev/null
+ # todo, remote file completion fails, figure out how to turn it off
+ export NODE_DISABLE_COLORS=1
+ # This get's rid of ugly terminal escape chars in node repl
+ # sometime, I'd like to have completion working in emacs shell for node
+ # the offending chars can be found in lib/readline.js,
+ # things that do like:
+ # stream.write('\x1b[' + (x + 1) + 'G');
+ # We can remove them and keep readline, for example by doing this
+ # to start a repl:
+ #!/usr/bin/env nodejs
+ # var readline = require('readline');
+ # readline.cursorTo = function(a,b,c) {};
+ # readline.clearScreenDown = function(a) {};
+ # const repl = require('repl');
+ # var replServer = repl.start('');
+ #
+ # no prompt, or else readline complete seems to be confused, based
+ # on our column being different? node probably needs to send
+ # different kind of escape sequence that is not ugly. Anyways,
+ # completion doesn't work yet even with the ugly prompt, so whatever
+ #
+ export NODE_NO_READLINE=1
+
fi
if [[ $- == *i* ]]; then
# for readline-complete.el
- if [[ $INSIDE_EMACS ]]; then
+ if [[ $RLC_INSIDE_EMACS ]]; then
+ # all for readline-complete.el
+ stty echo
bind 'set horizontal-scroll-mode on'
bind 'set print-completions-horizontally on'
bind '"\C-i": self-insert'
HISTTIMEFORMAT="%I:%M %p %m/%d "
# consecutive duplicate lines don't go in history
HISTCONTROL=ignoredups
-# just defensively unsetting this
-# this var can replace HISTCONTROL to do more flexible things like
-# not saving single char history items or specific names
-unset HISTIGNORE
+# works in addition to HISTCONTROL to do more flexible things
+# it could also do the same things as HISTCONTROL and thus replace it,
+# but meh. dunno why, but just " *" does glob expansion, so use [ ] to avoid it.
+HISTIGNORE='k *:[ ]*'
export BC_LINE_LENGTH=0
-path_add /a/opt/adt-bundle*/tools /a/opt/adt-bundle*/platform-tools
-path_add $HOME/bin/bash-programs-by-ian/utils
+
# note, if I use a machine I don't want files readable by all users, set
# umask 077 # If fewer than 4 digits are entered, leading zeros are assumed
C_DEFAULT_DIR=/a
+###################
+## include files ###
+###################
+for _x in /a/bin/distro-functions/src/* /a/bin/!(githtml)/*-function?(s); do
+ source "$_x"
+done
+unset _x
+# so I can share my bashrc
+for x in /a/bin/bash_unpublished/source-!(.#*); do source $x; done
+source $(dirname $(readlink -f $BASH_SOURCE))/path_add-function
+source /a/bin/log-quiet/logq-function
+path_add /a/exe
+path_add --ifexists --end /a/opt/adt-bundle*/tools /a/opt/adt-bundle*/platform-tools
+# todo, these need to be renamed to be less generic.
+# sync overrode something else useful
+#path_add $HOME/bin/bash-programs-by-ian/utils
+
###############
### aliases ###
###############
-if [[ $- == *i* ]]; then
- alias cp='cp -i'
- alias mv='mv -i'
-fi
+# very few aliases, functions are always preferred.
-# remove any default aliases for these
-alias ls > /dev/null 2>&1 && unalias ls
-alias ll > /dev/null 2>&1 && unalias ll
-alias grep > /dev/null 2>&1 && unalias grep
+# ancient stuff.
+if [[ $OS == Windows_NT ]]; then
+ alias ffs='cygstart "/c/Program Files (x86)/Mozilla Firefox/firefox.exe" -P scratch'
+ export DISPLAY=nt
+ alias j='command cygpath'
+ alias t='command cygstart'
+ alias cygstart='echo be quick, use the alias "t" instead :\)'
+ alias cygpath='echo be quick, use the alias "j" instead :\)'
+fi
-mkdir() {
- command mkdir -p "$@"
-}
+# keep this in mind? good for safety.
+# alias cp='cp -i'
+# alias mv='mv -i'
-alias d='builtin bg'
-complete -A stopped -P '"%' -S '"' d
-alias his='history'
+# remove any default aliases for these
+unalias ls ll grep &>/dev/null ||:
-# note: gksudo is recommended for X apps because it does not set the
-# home directory to the same.
-if [[ $- == *i* ]]; then
- # extra space at the end allows aliases to work
- alias s='SUDOD="$PWD" sudo -i '
-else
- s() {
- if [[ $EUID != 0 || $1 == -* ]]; then
- local SUDOD="$PWD"
- sudo -i "$@"
- else
- "$@"
- fi
- }
-fi
-if [[ $OS == Windows_NT ]]; then
- alias ffs='cygstart "/c/Program Files (x86)/Mozilla Firefox/firefox.exe" -P scratch'
- export DISPLAY=nt
- alias j='command cygpath'
- alias t='command cygstart'
- alias cygstart='echo be quick, use the alias "t" instead :\)'
- alias cygpath='echo be quick, use the alias "j" instead :\)'
-fi
#####################
-a() {
- beet "${@}"
+
+# file cut copy and paste, like the text buffers :)
+# I havn't tested these.
+_fbufferinit() { # internal use by
+ ! [[ $my_f_tempdir ]] && my_f_tempdir=$(mktemp -d)
+ rm -rf "$my_f_tempdir"/*
+}
+fcp() { # file cp
+ _fbufferinit
+ cp "$@" "$my_f_tempdir"/
+}
+fct() { # file cut
+ _fbufferinit
+ mv "$@" "$my_f_tempdir"/
+}
+fpst() { # file paste
+ [[ $2 ]] && { echo too many arguments; return 1; }
+ target=${1:-.}
+ cp "$my_f_tempdir"/* "$target"
}
-t() {
- trash-put "$@"
+# todo, update this
+complete -F _longopt la lower low rlt rld rl lld ts ll dircp ex fcp fct fpst gr
+
+
+_cdiff-prep() {
+ # join options which are continued to multiples lines onto one line
+ local first=true
+ grep -vE '^([ \t]*#|^[ \t]*$)' "$1" | while IFS= read -r line; do
+ # remove leading spaces/tabs. assumes extglob
+ if [[ $line == "[ ]*" ]]; then
+ line="${line##+( )}"
+ fi
+ if $first; then
+ pastline="$line"
+ first=false
+ elif [[ $line == *=* ]]; then
+ echo "$pastline" >> "$2"
+ pastline="$line"
+ else
+ pastline="$pastline $line"
+ fi
+ done
+ echo "$pastline" >> "$2"
}
+_khfix_common() {
+ local h=${1##*@}
+ ssh-keygen -R $h -f $(readlink -f ~/.ssh/known_hosts)
+ local x=$(timeout 0.1 ssh -v $1 |& sed -rn "s/debug1: Connecting to $h \[([^\]*)].*/\1/p");
+ ssh-keygen -R $x -f $(readlink -f ~/.ssh/known_hosts)
+}
+khfix() { # known hosts fix
+ _khfix_common "$@"
+ ssh $1 :
+}
+khcopy() {
+ _khfix_common "$@"
+ ssh-copy-id $1
+}
-if type ack-grep >/dev/null 2>&1; then
- alias ack=ack-grep
-fi
+a() {
+ beet "${@}"
+}
+ack() { ack-grep "$@"; }
-gr() {
- grep -i --binary-files=without-match --color=auto "$@"
+astudio() {
+ # googling android emulator libGL error: failed to load driver: r600
+ # lead to http://stackoverflow.com/a/36625175/14456
+ export ANDROID_EMULATOR_USE_SYSTEM_LIBS=1
+ /a/opt/android-studio/bin/studio.sh "$@" &r;
}
-grr() {
- grep -ri --binary-files=without-match --color=auto "$@"
+bashrcpush () {
+ local startdir="$PWD"
+ cd ~
+ for x in "$@"; do
+ ssh $x mkdir -p bin/distro-functions/src
+ tar cz bin/semi-private bin/distro-functions/src | ssh $x tar xz
+ done
+ cd $(mktemp -d)
+ command cp /a/c/repos/bash/!(.git|..|.) ~/.gitconfig .
+ for x in "$@"; do
+ tar cz * | ssh $x tar xz
+ done
+ cd "$startdir"
}
+bfg() { java -jar /a/opt/bfg-1.12.14.jar "$@"; }
+btc() {
+ local f=/etc/bitcoin/bitcoin.conf
+ bitcoin-cli -$(s grep rpcuser= $f) -$(s grep rpcpassword= $f) "$@"
+}
+caa() { git commit --amend --no-edit -a; }
calc() { echo "scale=3; $*" | bc -l; }
+# no having to type quotes, but also no command history:
+clc() {
+ local x
+ read -r x
+ echo "scale=3; $x" | bc -l
+}
-
-# makes it so chown -R symlink affects the symlink and its target.
-chown() {
- if [[ $1 == -R ]]; then
- shift
- command chown -h "$@"
- command chown "$@"
- command chown -RH "$@"
- else
- command chown "$@"
- fi
+cam() {
+ git commit -am "$*"
}
+ccat () { # config cat. see a config without extra lines.
+ grep '^\s*[^[:space:]#]' "$@"
+}
+cdiff() {
+ # diff config files,
+ # setup for format of postfix, eg:
+ # option = stuff[,]
+ # [more stuff]
+ local pastline
+ local unified="$(mktemp)"
+ local f1="$(mktemp)"
+ local f2="$(mktemp)"
+ _cdiff-prep "$1" "$f1"
+ _cdiff-prep "$2" "$f2"
+ cat "$f1" "$f2" | grep -Po '^[^=]+=' | sort | uniq > "$unified"
+ while IFS= read -r line; do
+ # the default bright red / blue doesn't work in emacs shell
+ dwdiff -cblue,red -A best -d " ," <(grep "^$line" "$f1" || echo ) <(grep "^$line" "$f2" || echo ) | colordiff
+ done < "$unified"
+}
-cgpl ()
+cgpl()
{
- if [[ $# == 0 ]]; then
+ if (($#)); then
+ cp /a/bin/data/COPYING "$@"
+ else
cp /a/bin/data/COPYING .
+ fi
+}
+capache()
+{
+ if (($#)); then
+ cp /a/bin/data/LICENSE "$@"
else
- cp /a/bin/data/COPYING "$@"
+ cp /a/bin/data/LICENSE .
fi
}
+chown() {
+ # makes it so chown -R symlink affects the symlink and its target.
+ if [[ $1 == -R ]]; then
+ shift
+ command chown -h "$@"
+ command chown -R "$@"
+ else
+ command chown "$@"
+ fi
+}
+
+cim() {
+ git commit -m "$*"
+}
+
+d() { builtin bg; }
+complete -A stopped -P '"%' -S '"' d
+dat() { # do all tee, for more complex scripts
+ tee >(ssh frodo bash -l) >(bash -l) >(ssh x2 bash -l) >(ssh tp bash -l)
+}
+da() { # do all
+ local host
+ "$@"
+ for host in x2 tp treetowl; do
+ ssh $host "$@"
+ done
+}
dc() {
diff --strip-trailing-cr -w "$@" # diff content
}
-
-distro_name() {
- if [[ -f /etc/fedora-release ]]; then
- echo fedora
- else
- grep "^ID=.*" /etc/os-release | sed 's/^ID=//'
- fi
+debian_pick_mirror () {
+ # netselect-apt finds a fast mirror.
+ # but we need to replace the mirrors ourselves,
+ # because it doesn't do that. best it can do is
+ # output a basic sources file
+ # here we get the server it found, get the main server we use
+ # then substitute all instances of one for the other in the sources file
+ # and backup original to /etc/apt/sources.list-original.
+ # this is idempotent. the only way to identify debian sources is to
+ # note the original server, so we put it in a comment so we can
+ # identify it later.
+ local file=$(mktemp -d)/f # safe way to get file name without creating one
+ sudo netselect-apt -o "$file" || return 1
+ url=$(grep ^\\w $file | head -n1 | awk '{print $2}')
+ sudo cp -f /etc/apt/sources.list /etc/apt/sources.list-original
+ sudo sed -ri "/http.us.debian.org/ s@( *[^ #]+ +)[^ ]+([^#]+).*@\1$url\2# http.us.debian.org@" /etc/apt/sources.list
+ sudo apt-get update
}
+despace() {
+ local x y
+ for x in "$@"; do
+ y="${x// /_}"
+ safe_rename "$x" "$y"
+ done
+}
dt() {
date "+%A, %B %d, %r" "$@"
}
+dus() {
+ du -sh ${@:-*} | sort -h
+}
+
+
e() { echo "$@"; }
+ediff() {
+ [[ ${#@} == 2 ]] || { echo "error: ediff requires 2 arguments"; return 1; }
+ emacs --eval "(ediff-files \"$1\" \"$2\")"
+}
+
+
envload() { # load environment from a previous: export > file
local file=${1:-$HOME/.${USER}_env}
eval "$(export | sed 's/^declare -x/export -n/')"
while IFS= read -r line; do
- # declare -x makes variables local to a function
- eval ${line/#declare -x/export}
+ # declare -x makes variables local to a function
+ eval ${line/#declare -x/export}
done < "$file"
}
+fa() {
+ # find array. make an array of file names found by find into $x
+ # argument: find arguments
+ # return: find results in an array $x
+ while read -rd ''; do
+ x+=("$REPLY");
+ done < <(find "$@" -print0);
+}
-# havn't tested these:
-#file cut copy and paste, like the text buffers :)
-_fbufferinit() { # internal use by
- ! [[ $my_f_tempdir ]] && my_f_tempdir=$(mktemp -d)
- rm -rf "$my_f_tempdir"/*
+faf() { # find all files
+ find $@ -type f
}
-fcp() { # file cp
- _fbufferinit
- cp "$@" "$my_f_tempdir"/
+
+fastboot() { /a/opt/androidsdk/platform-tools/fastboot "$@"; }
+
+ff() {
+ if type -P firefox &>/dev/null; then
+ firefox "$@"
+ else
+ iceweasel "$@"
+ fi
}
-fct() { # file cut
- _fbufferinit
- mv "$@" "$my_f_tempdir"/
+
+
+
+fn() {
+ firefox -P alt "$@" >/dev/null 2>&1
}
-fpst() { # file paste
- [[ $2 ]] && { echo too many arguments; return 1; }
- target=${1:-.}
- cp "$my_f_tempdir"/* "$target"
+
+
+fsdiff () {
+ local missing=false
+ local dname="${PWD##*/}"
+ local m="/a/tmp/$dname-missing"
+ local d="/a/tmp/$dname-diff"
+ [[ -e $d ]] && rm "$d"
+ [[ -e $m ]] && rm "$m"
+ local msize=0
+ local fsfile
+ while read -r line; do
+ fsfile="$1${line#.}"
+ if [[ -e "$fsfile" ]]; then
+ md5diff "$line" "$fsfile" && tee -a "/a/tmp/$dname-diff" <<< "$fsfile $line"
+ else
+ missing=true
+ echo "$line" >> "$m"
+ msize=$((msize + 1))
+ fi
+ done < <(find -type f )
+ if $missing; then
+ echo "$m"
+ (( msize <= 100 )) && cat $m
+ fi
+}
+fsdiff-test() {
+ # expected output, with different tmp dirs
+ # /tmp/tmp.HDPbwMqdC9/c/d ./c/d
+ # /a/tmp/tmp.qLDkYxBYPM-missing
+ # ./b
+ cd $(mktemp -d)
+ echo ok > a
+ echo nok > b
+ mkdir c
+ echo ok > c/d
+ local x=$(mktemp -d)
+ mkdir $x/c
+ echo different > $x/c/d
+ echo ok > $x/a
+ fsdiff $x
+}
+rename-test() {
+ # test whether missing files were renamed, generally for use with fsdiff
+ # $1 = fsdiff output file, $2 = directory to compare to. pwd = fsdiff dir
+ # echos non-renamed files
+ local x y found
+ unset sums
+ for x in "$2"/*; do
+ { sums+=( "$(md5sum < "$x")" ) ; } 2>/dev/null
+ done
+ while read -r line; do
+ { missing_sum=$(md5sum < "$line") ; } 2>/dev/null
+ renamed=false
+ for x in "${sums[@]}"; do
+ if [[ $missing_sum == "$x" ]]; then
+ renamed=true
+ break
+ fi
+ done
+ $renamed || echo "$line"
+ done < "$1"
+ return 0
}
+feh() {
+ command feh -FzZ "$@"
+}
-# find array. make an array of file names found by find into $x
-# argument: find arguments
-# return: find results in an array $x
-fa() {
- while read -rd ''; do
- x+=("$REPLY");
- done < <(find "$@" -print0);
+funce() {
+ # like -e for functions. returns on error.
+ # at the end of the function, disable with:
+ # trap ERR
+ trap 'echo "${BASH_COMMAND:+BASH_COMMAND=\"$BASH_COMMAND\" }
+${FUNCNAME:+FUNCNAME=\"$FUNCNAME\" }${LINENO:+LINENO=\"$LINENO\" }\$?=$?"
+trap ERR
+return' ERR
}
+fw() {
+ firefox -P default "$@" >/dev/null 2>&1
+}
+
+getdir () {
+ local help="Usage: getdir [--help] PATH
+Output the directory of PATH, or just PATH if it is a directory."
+ if [[ $1 == --help ]]; then
+ echo "$help"
+ return 0
+ fi
+ if [[ $# -ne 1 ]]; then
+ echo "getdir error: expected 1 argument, got $#"
+ return 1
+ fi
+ if [[ -d $1 ]]; then
+ echo "$1"
+ else
+ local dir="$(dirname "$1")"
+ if [[ -d $dir ]]; then
+ echo "$dir"
+ else
+ echo "getdir error: directory does not exist"
+ return 1
+ fi
+ fi
+}
+
git_empty_branch() { # start an empty git branch. carefull, it deletes untracked files.
[[ $# == 1 ]] || { echo 'need a branch name!'; return 1;}
local gitroot
gitroot || return 1 # function to set gitroot
- builtin cd $gitroot
+ builtin cd "$gitroot"
git symbolic-ref HEAD refs/heads/$1
rm .git/index
git clean -fdx
}
-fw() {
- firefox -P default "$@" >/dev/null 2>&1
-}
+gitroot() {
+ local help="Usage: gitroot [--help]
+Print the full path to the root of the current git repo
-fn() {
- firefox -P alt "$@" >/dev/null 2>&1
+Handles being within a .git directory, unlike git rev-parse --show-toplevel,
+and works in older versions of git which did not have that."
+ if [[ $1 == --help ]]; then
+ echo "$help"
+ return
+ fi
+ local p=$(git rev-parse --git-dir) || { echo "error: not in a git repo" ; return 1; }
+ [[ $p != /* ]] && p=$PWD
+ echo "${p%%/.git}"
}
+# quit will prompt if the program crashes.
+gmacs() { gdb -ex=r -ex=quit --args emacs "$@"; r; }
+gse() {
+ git send-email --notes '--envelope-sender=<ian@iankelling.org>' \
+ --suppress-cc=self "$@"
+}
+gr() {
+ grep -iIP --color=auto "$@"
+}
+grr() {
+ if [[ ${#@} == 1 ]]; then
+ grep -riIP --color=auto "$@" .
+ else
+ grep -riIP --color=auto "$@"
+ fi
+}
-# horizontal row. used to break up output
-hr() { printf "$(tput setaf 5)â–ˆ$(tput sgr0)%.0s" $(seq $COLUMNS); }
+hstatus() {
+ # do git status on published repos
+ cd /a/bin/githtml
+ for x in !(forks) forks/* ian-specific/*; do
+ cd `readlink -f $x`/..
+ hr
+ echo $x
+ i status
+ cd /a/bin/githtml
+ done
+}
+hl() { # history limit. Write extra history to archive file.
+ # todo: this is not working or not used currently
+ local max_lines linecount tempfile prune_lines x
+ local harchive="${HISTFILE}_archive"
+ for x in "$HISTFILE" "$harchive"; do
+ [[ -e $x ]] || { touch "$x" && echo "notice from hl(): creating $x"; }
+ if [[ ! $x || ! -e $x || ! -w $x || $(stat -c "%u" "$x") != $EUID ]]; then
+ echo "error in hl: history file \$x:$x no good"
+ return 1
+ fi
+ done
+ history -a # save history
+ max_lines=$HISTFILELINES
+ [[ $max_lines =~ ^[0-9]+$ ]] || { echo "error in hl: failed to get max line count"; return 1; }
+ linecount=$(wc -l < $HISTFILE) # pipe so it doesn't output a filename
+ [[ $linecount =~ ^[0-9]+$ ]] || { echo "error in hl: wc failed"; return 1; }
+ if (($linecount > $max_lines)); then
+ prune_lines=$(($linecount - $max_lines))
+ head -n $prune_lines "$HISTFILE" >> "$harchive" \
+ && sed --follow-symlinks -ie "1,${prune_lines}d" $HISTFILE
+ fi
+}
-i() {
- git "$@"
+hr() { # horizontal row. used to break up output
+ printf "$(tput setaf 5)â–ˆ$(tput sgr0)%.0s" $(seq $COLUMNS)
+ echo
}
+
+hrcat() { local f; for f; do [[ -f $f ]] || continue; hr; echo "$f"; cat "$f"; done }
+
+
+i() { git "$@"; }
# modified from ~/local/bin/git-completion.bash
# other completion commands are mostly taken from bash_completion package
complete -o bashdefault -o default -o nospace -F _git i 2>/dev/null \
|| complete -o default -o nospace -F _git i
+if ! type service &>/dev/null; then
+ service() {
+ echo actually running: systemctl $2 $1
+ systemctl $2 $1
+ }
+fi
+
+ic() {
+ # fast commit all
+ git commit -am "$*"
+}
+
+idea() {
+ /a/opt/idea-IC-163.7743.44/bin/idea.sh "$@" &r
+}
+
+ifn() {
+ # insensitive find
+ find -L . -not \( -name .svn -prune -o -name .git -prune \
+ -o -name .hg -prune \) -iname "*$**" 2>/dev/null
+}
+
+
+if [[ $OS == Windows_NT ]]; then
+ # cygstart wrapper
+ cs() {
+ cygstart "$@" &
+ }
+ xp() {
+ explorer.exe .
+ }
+ # launch
+ o() {
+ local x=(*$1*)
+ (( ${#x[#]} > 1 )) && { echo "warning ${#x[#]} matches found"; sleep 1; }
+ cygstart *$1* &
+ }
+else
+ o() {
+ if type gvfs-open &> /dev/null ; then
+ gvfs-open "$@"
+ else
+ xdg-open "$@"
+ fi
+ # another alternative is run-mailcap
+ }
+fi
+
+
-# insensitive find
-ifn () {
- find . -iname '*'"$*"'*'
+istext() {
+ grep -Il "" "$@" &>/dev/null
}
+jtail() {
+ journalctl -n 10000 -f "$@" | grep -Evi "^(\S+\s+){4}(sudo|ovpn|sshd|cron)"
+}
l() {
if [[ $PWD == /[iap] ]]; then
- command ls -A --color=auto -I lost+found "$@"
+ command ls -A --color=auto -I lost+found "$@"
else
- command ls -A --color=auto "$@"
+ command ls -A --color=auto "$@"
fi
}
-lld() { ll -d "$@"; }
+lcn() { locate -i "*$**"; }
+lld() { ll -d "$@"; }
low() { # make filenames all lowercase
local x y
for x in "$@"; do
- y=$(tr "[A-Z]" "[a-z]" <<<"$x")
- [[ $y != $x ]] && mv "$x" "$y"
+ y=$(tr "[A-Z]" "[a-z]" <<<"$x")
+ [[ $y != $x ]] && mv "$x" "$y"
done
}
+
+
lower() { # make first letter of filenames lowercase.
local x
for x in "$@"; do
- if [[ ${x::1} == [A-Z] ]]; then
- y=$(tr "[A-Z]" "[a-z]" <<<"${x::1}")"${x:1}"
+ if [[ ${x::1} == [A-Z] ]]; then
+ y=$(tr "[A-Z]" "[a-z]" <<<"${x::1}")"${x:1}"
safe_rename "$x" "$y"
- fi
+ fi
done
}
-safe_rename() {
- if [[ $# != 2 ]]; then
- echo safe_rename error: $# args, need 2 >2
- return 1
- elif [[ $1 != $2 ]]; then
- if [[ -e $2 ]]; then
- echo Cannot rename "$1" to "$2" as it already exists.
- else
- mv "$1" "$2"
- fi
- fi
-}
-despace() {
- local x y
- for x in "$@"; do
- y="${x// /_}"
- safe_rename "$x" "$y"
- done
+k() { # history search
+ grep -P --binary-files=text "$@" ${HISTFILE:-~/.bash_history} | tail -n 40;
}
-# force symbolic link creation.
-# trash-put any existing files where links would be created.
-# mkdir -p the directory containing the link(s) if needed.
-# then do ln -s -- "$@"
-lnf() {
- if [[ $# -gt 2 && ! -d ${!#} ]]; then
- mkdir -p "${!#}"
- fi
- if [[ $# -gt 1 && -d ${!#} ]]; then
- local oldcwd=$PWD
- cd ${!#} # last arg
- for x in "${@:1:$(($#-1))}"; do # all but last arg
- # remove any trailing slashes
- x="${x%%+(/)}"
- # remove any leading directory components
- x="${x##*/}"
- te "$x" && trash-put "$x"
- done
- cd "$oldcwd"
- elif [[ $# -eq 2 ]]; then
- if te "$2"; then
- trash-put "$2"
- elif [[ ! -d $(getdir "$2") ]]; then
- mkdir -p $(getdir "$2")
- fi
- else
- te "${1##*/}" && rm "${1##*/}"
- fi
- ln -s -- "$@"
-}
+make-targets() {
+ # show make targets, via http://stackoverflow.com/questions/3063507/list-goals-targets-in-gnu-make
+ make -qp | awk -F':' '/^[a-zA-Z0-9][^$#\/\t=]*:([^=]|$)/ {split($1,A,/ /);for(i in A)print A[i]}'
+}
-# package manager
-# aliases would be much more compact, but they can't be used as ssh commands
-# also, to be used in a script, you need -i which prints annoying
-# warnings. instead, use -l in a script to source this file
-if type -p yum > /dev/null; then
- p() {
- if [[ $EUID == 0 ]]; then
- yum "$@"
- else
- sudo yum "$@"
- fi
- }
- pi() {
- if [[ $EUID == 0 ]]; then
- yum -y install "$@"
- else
- sudo yum -y install "$@"
- fi
- }
- pf() {
- if [[ $EUID == 0 ]]; then
- yum search "$@"
- else
- sudo yum search "$@"
- fi
- }
-else
- p() {
- if [[ $EUID == 0 ]]; then
- aptitude "$@"
- else
- sudo aptitude "$@"
- fi
- }
- pi() {
- if [[ $EUID == 0 ]]; then
- aptitude -y install "$@"
- else
- sudo aptitude -y install "$@"
- fi
- }
- pf() {
- # scratch a very annoying itch.
- # package description width as wide as the screen, and package name field small
- # aptitude manual can't figure out how wide emacs terminal is,
- # of course it doesn't consult the $COLUMNS variable...
- # and in a normal terminal, it makes the package name field ridiculously big
- # also, remove that useless dash before the description
- if [[ $EUID == 0 ]]; then
- aptitude -F "%c%a%M %p %$((COLUMNS - 30))d" -w $COLUMNS search "$@"
- else
- sudo aptitude -F "%c%a%M %p %$((COLUMNS - 30))d" -w $COLUMNS search "$@"
- fi
- }
-fi
+mkc() {
+ mkdir "$1"
+ c "$1"
+}
+mkdir() { command mkdir -p "$@"; }
-# test existence / exists
-te() {
- local ret=0
- for x in "$@"; do
- [[ -e "$x" || -L "$x" ]] || ret=1
- done
- return $ret
+pithos() {
+ cd /
+ export PYTHONPATH=/a/opt/Pithosfly
+ python3 -m pithos&r
}
-
-# fix root file ownership for FILE argument.
-# check if parent or grandparent is not root and if the dir of FILE is also
-# owned by that user, and change ownership to that user
-perm_fix() {
- local parent
- if [[ $EUID == 0 ]]; then
- te "$1" || touch $1
- if [[ $(stat -c "%u" "$1") == 0 ]] ; then
- argdir=$(getdir "$1")
- if [[ $(stat -c "%u" "$argdir") != 0 ]] ; then
- if ! chown "--reference=$argdir" "$1"; then
- echo failed to fix bad ownership file permissons
- return 1
- fi
- fi
- fi
- fi
+pakaraoke() {
+ # from http://askubuntu.com/questions/456021/remove-vocals-from-mp3-and-get-only-instrumentals
+ pactl load-module module-ladspa-sink sink_name=Karaoke master=alsa_output.usb-Audioengine_Audioengine_D1-00.analog-stereo plugin=karaoke_1409 label=karaoke control=-30
}
+
pfind() { #find *$1* in $PATH
[[ $# != 1 ]] && { echo requires 1 argument; return 1; }
local pathArray
find "${pathArray[@]}" -iname "*$1*"
}
+pick-trash() {
+ # trash-restore lists everything that has been trashed at or below CWD
+ # This picks out files just in CWD, not subdirectories,
+ # which also match grep $1, usually use $1 for a time string
+ # which you get from running restore-trash once first
+ local name x ask
+ local nth=1
+ # last condition is to not ask again for ones we skipped
+ while name="$( echo | restore-trash | gr "$PWD/[^/]\+$" | gr "$1" )" \
+ && [[ $name ]] && (( $(wc -l <<<"$name") >= nth )); do
+ name="$(echo "$name" | head -n $nth | tail -n 1 )"
+ read -p "$name [Y/n] " ask
+ if [[ ! $ask || $ask == [Yy] ]]; then
+ x=$( echo "$name" | gr -o "^\s*[0-9]*" )
+ echo $x | restore-trash > /dev/null
+ elif [[ $ask == [Nn] ]]; then
+ nth=$((nth+1))
+ else
+ return
+ fi
+ done
+}
-pwd() { # do pwd + some other info.
- echo "$(ll -d "$PWD") $USER@$HOSTNAME $(date +%r)"
+postconfin() {
+ local MAPFILE
+ mapfile -t
+ local s
+ [[ $EUID == 0 ]] || s=s
+ $s postconf -ev "${MAPFILE[@]}"
}
+pub() {
+ rld /a/h/_site/ li:/var/www/iankelling.org/html
+}
-pwgen() { # generate a random password, with digits & punctuation and without
- arg=${1:-50}
- head -c 200 /dev/urandom | tr -cd '[:graph:]' | head -c "$arg"
- echo
- head -c 200 /dev/urandom | tr -cd '[:alnum:]' | head -c "$arg"
- echo
+pubip() { curl -4s https://icanhazip.com; }
+whatismyip() { pubip; }
+
+
+pwgen() {
+ # -m = min length
+ # -x = max length
+ # -t = print pronunciation
+ apg -m 12 -x 16 -t
}
+
q() { # start / launch a program in the backround and redir output to null
"$@" &> /dev/null &
}
+r() {
+ exit "$@" 2>/dev/null
+}
+rbpipe() { rbt post -o --diff-filename=- "$@"; }
+rbp() { rbt post -o "$@"; }
-r() {
- exit "$@"
+rl() {
+ # rsync, root is required to keep permissions right.
+ # rsync --archive --human-readable --verbose --itemize-changes --checksum \(-ahvic\) \
+ # --no-times --delete
+ # basically, make an exact copy, use checksums instead of file times to be more accurate
+ rsync -ahvic --delete "$@"
+}
+rld() {
+ # like rlu, but don't delete files on the target end which
+ # do not exist on the original end.
+ rsync -ahvic "$@"
+}
+complete -F _rsync -o nospace rld rl rlt
+
+rlt() {
+ # rl without preserving modification time.
+ rsync -ahvic --delete --no-t "$@"
}
-# rsync, root is required to keep permissions right.
-# rsync --archive --human-readable --verbose --itemize-changes --checksum \(-ahvic\) \
-# --no-times --delete
-# basically, make an exact copy, use checksums instead of file times to be more accurate
-rl() { rsync -ahvic --delete "$@"; }
-# don't delete files on the target end which do not exist on the original end:
-rld() { rsync -ahvic "$@"; }
-complete -F _rsync -o nospace rld rlt fl
-# rl without preserving modification time. for some reason I had this as default before.
-# perhaps that reason will come up again and I will document it.
-rlt() { rsync -ahvic --delete --no-t "$@"; }
+rlu() { # [OPTS] HOST PATH
+ # eg rlu -opts frodo /testpath
+ # useful for selectively sending dirs which have been synced with unison,
+ # where the path is the same on both hosts.
+ opts=("${@:1:$#-2}") # 1 to last -2
+ path="${@:$#}" # last
+ host="${@:$#-1:1}" # last -1
+ if [[ $path == .* ]]; then echo error: need absolut path; return 1; fi
+ # rync here uses checksum instead of time so we don't mess with
+ # unison relying on time as much. g is for group, same reason
+ # to keep up with unison.
+ s rsync -rlpchviog --relative "${opts[@]}" "$path" "root@$host:/";
+}
+rspicy() { # usage: HOST DOMAIN
+ # connect to spice vm remote host. use vspicy for local host
+ local port=$(ssh $1<<EOF
+sudo virsh dumpxml $2|grep "<graphics.*type='spice'" | \
+ sed -rn "s/.*port='([0-9]+).*/\1/p"
+EOF
+ )
+ if [[ $port ]]; then
+ spicy -h $1 -p $port
+ else
+ echo "error: no port found. check that the domain is running."
+ fi
+}
-# use sb instead of s is for sudo redirections, eg. sb 'echo "ok fine" > /etc/file'
-sb() {
+s() {
+ # background
+ # I use a function because otherwise we can't use in a script,
+ # can't assign to variable.
+ #
+ # note: gksudo is recommended for X apps because it does not set the
+ # home directory to the same, and thus apps writing to ~ fuck things up
+ # with root owned files.
+ #
+ if [[ $EUID != 0 || $1 == -* ]]; then
+ SUDOD="$PWD" sudo -i "$@"
+ else
+ "$@"
+ fi
+}
+
+safe_rename() {
+ if [[ $# != 2 ]]; then
+ echo safe_rename error: $# args, need 2 >2
+ return 1
+ elif [[ $1 != $2 ]]; then
+ if [[ -e $2 ]]; then
+ echo Cannot rename "$1" to "$2" as it already exists.
+ else
+ mv "$1" "$2"
+ fi
+ fi
+}
+
+
+sb() { # sudo bash -c
+ # use sb instead of s is for sudo redirections,
+ # eg. sb 'echo "ok fine" > /etc/file'
local SUDOD="$PWD"
sudo -i bash -c "$@"
}
complete -F _root_command s sb
-# use -ll, less secure but faster.
-srm () {
- srm -ll "$@"
+scssl() {
+ # s gem install scss-lint
+ pushd /a/opt/thoughtbot-guides
+ git pull --stat
+ popd
+ scss-lint -c /a/opt/thoughtbot-guides/style/sass/.scss-lint.yml "$@"
}
-# sudo redo. be aware, this command may not work right on strange distros or earlier software
-sr() {
- if [[ $# == 0 ]]; then
- sudo -E bash -c -l "$(history -p '!!')"
+ser() {
+ local s; [[ $EUID != 0 ]] && s=sudo
+ if type -p systemctl &>/dev/null; then
+ $s systemctl $1 $2
else
- echo this command redos last history item. no argument is accepted
+ $s service $2 $1
fi
}
+sgo() { # service go
+ service=$1
+ ser restart $service
+ if type -p systemctl &>/dev/null; then
+ ser enable $service
+ fi
+}
+
+
+shellck() {
+ # 2086 = unquoted $var
+ # 2046 = unquoted $(cmd)
+ # i had -x as an arg, but debian testing(stretch) doesn't support it
+ shellcheck -e 2086,2046,2068,2006,2119 "$@"
+}
-# log with script. timing is $1.t and script is $1.s
-# -l to save to ~/typescripts/
-# -t to add a timestamp to the filenames
slog() {
+ # log with script. timing is $1.t and script is $1.s
+ # -l to save to ~/typescripts/
+ # -t to add a timestamp to the filenames
local logdir do_stamp arg_base
(( $# >= 1 )) || { echo "arguments wrong"; return 1; }
logdir="/a/dt/"
do_stamp=false
while getopts "lt" option
do
- case $option in
- l ) arg_base=$logdir ;;
+ case $option in
+ l ) arg_base=$logdir ;;
t ) do_stamp=true ;;
esac
done
scriptreplay "$1.t" "$1.s"
}
+sr() {
+ # sudo redo. be aware, this command may not work right on strange distros or earlier software
+ if [[ $# == 0 ]]; then
+ sudo -E bash -c -l "$(history -p '!!')"
+ else
+ echo this command redos last history item. no argument is accepted
+ fi
+}
+
+srm () {
+ # with -ll, less secure but faster.
+ command srm -ll "$@"
+}
+
+srun() {
+ scp $2 $1:/tmp
+ ssh $1 /tmp/${2##*/} "${@:2}"
+}
+swap() {
+ local tmp
+ tmp=$(mktemp)
+ mv $1 $tmp
+ mv $2 $1
+ mv $tmp $2
+}
-# timer in minutes
-tm() {
- (sleep $(calc "$@ * 60") && mpv /a/bin/data/alarm.mp3) > /dev/null 2>&1 &
+t() {
+ local x
+ local -a args
+ if type -t trash-put >/dev/null; then
+ # skip args that don't exist, or else trash-put will have an error
+ for x in "$@"; do
+ if [[ -e $x || -L $x ]]; then
+ args+=("$x")
+ fi
+ done
+ [[ ! ${args[@]} ]] || trash-put "${args[@]}"
+ else
+ rm -rf "$@"
+ fi
+}
+
+
+tclock() {
+ clear
+ date +%l:%_M
+ len=60
+ # this goes to full width
+ #len=${1:-$((COLUMNS -7))}
+ x=1
+ while true; do
+ if (( x == len )); then
+ end=true
+ d="$(date +%l:%_M) "
+ else
+ end=false
+ d=$(date +%l:%M:%_S)
+ fi
+ echo -en "\r"
+ echo -n "$d"
+ for ((i=0; i<x; i++)); do
+ if (( i % 6 )); then
+ echo -n _
+ else
+ echo -n .
+ fi
+ done
+ if $end; then
+ echo
+ x=1
+ else
+ x=$((x+1))
+ fi
+ sleep 5
+ done
+}
+
+
+te() {
+ # test existence / exists
+ local ret=0
+ for x in "$@"; do
+ [[ -e "$x" || -L "$x" ]] || ret=1
+ done
+ return $ret
}
+tm() {
+ # timer in minutes
+ (sleep $(calc "$@ * 60") && mpv --volume 50 /a/bin/data/alarm.mp3 --loop=no) > /dev/null 2>&1 &
+}
ts() { # start editing a new file
[[ $# != 1 ]] && echo "I need a filename." && return 1
quiet=true
fi
if [[ $1 == *.c ]]; then
- e '#include <stdio.h>' >"$1"
- e '#include <stdlib.h>' >>"$1"
- e 'int main(int argc, char * argv[]) {' >>"$1"
- e ' printf( "hello world\n");' >>"$1"
- e ' return 0;' >>"$1"
- e '}' >>"$1"
- e "${1%.c}: $1" > Makefile
- e " g++ -ggdb -std=gnu99 -o ${1%.c} $<" >> Makefile
- e "#!/bin/bash" >run.sh
- e "./${1%.c}" >>run.sh
- chmod +x run.sh
+ e '#include <stdio.h>' >"$1"
+ e '#include <stdlib.h>' >>"$1"
+ e 'int main(int argc, char * argv[]) {' >>"$1"
+ e ' printf( "hello world\n");' >>"$1"
+ e ' return 0;' >>"$1"
+ e '}' >>"$1"
+ e "${1%.c}: $1" > Makefile
+ e " g++ -ggdb -std=gnu99 -o ${1%.c} $<" >> Makefile
+ e "#!/bin/bash" >run.sh
+ e "./${1%.c}" >>run.sh
+ chmod +x run.sh
elif [[ $1 == *.java ]]; then
- e "public class ${1%.*} {" >"$1"
- e ' public static void main(String[] args) {' >>"$1"
- e ' System.out.println("Hello, world!");' >>"$1"
- e ' }' >>"$1"
- e '}' >>"$1"
-
+ e "public class ${1%.*} {" >"$1"
+ e ' public static void main(String[] args) {' >>"$1"
+ e ' System.out.println("Hello, world!");' >>"$1"
+ e ' }' >>"$1"
+ e '}' >>"$1"
else
- echo "#!/bin/bash" > "$1"
- chmod +x "$1"
+ echo "#!/bin/bash" > "$1"
+ chmod +x "$1"
fi
[[ $quiet ]] || g "$1"
+}
+
+tu() {
+ local s;
+ local dir="$(dirname "$1")"
+ if [[ -e $1 && ! -w $1 || ! -w $(dirname "$1") ]]; then
+ s=s;
+ fi
+ $s teeu "$@"
}
tx() { # toggle set -x, and the prompt so it doesn't spam
if [[ $- == *x* ]]; then
- set +x
+ set +x
PROMPT_COMMAND=prompt_command
else
unset PROMPT_COMMAND
PS1="\w \$ "
- set -x
+ set -x
fi
}
+psnsvpn() {
+ # show all processes in the vpn network namespace.
+ # blank entries appear to be subprocesses/threads of transmission daemon
+ ps -w | head -n 1
+ s find -L /proc/[1-9]*/task/*/ns/net -samefile /run/netns/vpn | cut -d/ -f5 | \
+ while read l; do
+ x=$(ps -w --no-headers -p $l);
+ if [[ $x ]]; then echo "$x"; else echo $l; fi;
+ done
+}
+netnsvpn() {
+ # manually run vpn so it stays within a network namespace,
+ # until I get it all wired up with systemd.
+ newns vpn start
+ pid=$(< /run/openvpn/client.pid)
+ vpn_on=false
+ if [[ $pid ]]; then
+ if [[ -e /proc/$pid ]]; then
+ vpn_on=true
+ else
+ vpn_on=false
+ s rm -f /run/openvpn/client.pid
+ fi
+ fi
+ $vpn_on || s ip netns exec vpn /usr/sbin/openvpn --daemon ovpn --config /etc/openvpn/client.conf --cd /etc/openvpn --writepid /run/openvpn/client.pid
+}
-if [[ $OS == Windows_NT ]]; then
- # cygstart wrapper
- cs() {
- cygstart "$@" &
- }
- xp() {
- explorer.exe .
- }
- # launch
- o() {
- local x=(*$1*)
- (( ${#x[#]} > 1 )) && { echo "warning ${#x[#]} matches found"; sleep 1; }
- cygstart *$1* &
- }
-else
- o() {
- if type gvfs-open &> /dev/null ; then
- gvfs-open "$@"
- else
- xdg-open "$@"
- fi
- # another alternative is run-mailcap
- }
-fi
-
+vc() {
+ [[ $1 ]] || { e "$0: error, expected cmd to run"; return 1; }
+ gksudo -- ip netns exec vpn gksudo -u ${SUDO_USER:-$USER} "$@"
+}
-# todo, update this
-complete -F _longopt la lower low rlt rld rl lld ts ll dircp ex fcp fct fpst gr
+transmission-stop() {
+ local pid=$(cat /var/lib/transmission-daemon/transmission-daemon.pid)
+ if [[ $pid ]]; then
+ sudo kill $pid
+ else
+ psg transmission-daemon
+ fi
+}
-hl() { # history limit. Write extra history to archive file.
- local max_lines linecount tempfile prune_lines
- local harchive="${HISTFILE}_archive"
- for x in "$HISTFILE" "$harchive"; do
- if [[ ! $x || ! -w $x || $(stat -c "%u" "$x") != $EUID ]]; then
- echo "error in hl: history file $x no good"
- return 1
+transmission() {
+ netnsvpn
+ vc transmission-gtk&
+ i=0
+ while true; do
+ if ((i > 10)); then
+ echo "$0: error: vpn tun0 didn't show up"
+ return 1
fi
+ tun_ip=$(s ip netns exec vpn ip a show dev tun0 | sed -rn 's/^ *inet (10\.8\.\S+).*/\1/p')
+ [[ ! $tun_ip ]] || break
+ sleep 1
+ i=$((i + 1))
done
- history -a # save history
- max_lines=$HISTFILELINES
- [[ $max_lines =~ ^[0-9]+$ ]] || { echo "error in hl: failed to get max line count"; return 1; }
- linecount=$(wc -l < $HISTFILE) # pipe so it doesn't output a filename
- [[ $linecount =~ ^[0-9]+$ ]] || { echo "error in hl: wc failed"; return 1; }
- if (($linecount > $max_lines)); then
- prune_lines=$(($linecount - $max_lines))
- head -n $prune_lines "$HISTFILE" >> "$harchive" \
- && sed -ie "1,${prune_lines}d" $HISTFILE
- fi
+ echo "$0: tun_ip=$tun_ip"
+ [[ $tun_ip ]] || { e "$0: error: no tun0 addr found"; return 1; }
+ ssh dopub bash <<EOF
+set -e
+rule="-A PREROUTING -i eth0 -p tcp -m tcp --dport 63324 -j DNAT --to-destination $tun_ip:63324"
+found=false
+while read -r line; do
+ if [[ \$line == \$rule ]] && ! \$found; then
+ found=true
+ else
+ iptables -t nat -D \${line#-A}
+ fi
+done < <(iptables -t nat -S | grep -E -- '--dport\s+63324')
+\$found || iptables -t nat \$rule
+EOF
+}
+
+virshrm() {
+ for x in "$@"; do virsh destroy "$x"; virsh undefine "$x"; done
+}
+
+vm-set-listen(){
+ local t=$(mktemp)
+ local vm=$1
+ local ip=$2
+ s virsh dumpxml $vm | sed -r "s/(<listen.*address=')([^']+)/\1$ip/" | \
+ sed -r "s/listen='[^']+/listen='$ip/"> $t
+ s virsh undefine $vm
+ s virsh define $t
}
-# commands to run when bash exits normally
-trap "hl; smh" EXIT
+
+vmshare() {
+ vm-set-listen $1 0.0.0.0
+}
+
+
+vmunshare() {
+ vm-set-listen $1 127.0.0.1
+}
+
+vpn() {
+ s systemctl start openvpn@client&
+ journalctl --unit=openvpn@client -f -n0
+}
+
+
+vpnoff() {
+ s systemctl stop openvpn@client
+}
+
+
+vrm() {
+ virsh destroy $1
+ virsh undefine $1
+}
+
+
+
+vspicy() { # usage: VIRSH_DOMAIN
+ # connect to vms made with virt-install
+ spicy -p $(sudo virsh dumpxml "$1"|grep "<graphics.*type='spice'"|\
+ sed -r "s/.*port='([0-9]+).*/\1/")
+}
+
+
+whatismyip() { curl ipecho.net/plain ; echo; }
+
+
+#############################
+######### misc stuff ########
+#############################
+
+if [[ $- == *i* ]]; then
+ # commands to run when bash exits normally
+ trap "hl; _smh" EXIT
+fi
# temporary variables to test colorization
if [[ $OS != Windows_NT ]]; then
GIT_PS1_SHOWDIRTYSTATE=true
fi
- # arch source location
+ # arch source lopip show -fcation
[[ -r /usr/share/git/git-prompt.sh ]] && source /usr/share/git/git-prompt.sh
# fedora/debian source
[[ -r /usr/share/git-core/contrib/completion/git-prompt.sh ]] && source /usr/share/git-core/contrib/completion/git-prompt.sh
fi
# this needs to come before next ps1 stuff
- if [[ $BASH_VERSION == [456789]* ]]; then
- shopt -s autocd
- shopt -s globstar
- shopt -s dirspell
- PS1='\w'
- if [[ $- == *i* ]] && [[ ! $INSIDE_EMACS ]]; then
- PROMPT_DIRTRIM=2
- bind -m vi-command B:shell-backward-word
- bind -m vi-command W:shell-forward-word
- fi
- else
- PS1='\W'
+ # this stuff needs bash 4, feb 2009,
+ # old enough to no longer condition on $BASH_VERSION anymore
+ shopt -s autocd
+ shopt -s dirspell
+ PS1='\w'
+ if [[ $- == *i* ]] && [[ ! $RLC_INSIDE_EMACS ]]; then
+ PROMPT_DIRTRIM=2
+ bind -m vi-command B:shell-backward-word
+ bind -m vi-command W:shell-forward-word
fi
if [[ $SSH_CLIENT ]]; then
prompt_command() {
local return=$? # this MUST COME FIRST
- local psc pst
- local ps_char ps_color
+ local psc pst ps_char ps_color stale_subvol
unset IFS
history -a # save history
- history -n # read any new history
- if [[ ! DESKTOP_SESSION == xmonad && $TERM == *(screen*|xterm*|rxvt*) ]]; then
+
+ # for titlebar
+ if [[ ! $DESKTOP_SESSION == xmonad && $TERM == *(screen*|xterm*|rxvt*) ]]; then
# from the screen man page
if [[ $TERM == screen* ]]; then
local title_escape="\033]..2;"
echo -ne "$title_escape${PWD/#$HOME/~} $USER@$HOSTNAME\007"
fi
+
case $return in
0) ps_color="$(get_term_color blue)"
ps_char='\$'
;;
1) ps_color="$(get_term_color green)"
- ps_char=$return
+ ps_char="$return \\$"
;;
*) ps_color="$(get_term_color yellow)"
- ps_char=$return
+ ps_char="$return \\$"
;;
esac
if [[ ! -O . ]]; then # not owner
ps_color="$(get_term_color bold green)"
fi
fi
- PS1="${PS1/%!(*[wW]*)}$(__git_ps1 ' (%s)') \[$ps_color\]$ps_char\[$(get_term_color nocolor)\] "
+ # I would set nullglob, but bash has had bugs where that
+ # doesn't work if not in top level.
+ if [[ -e /nocow/btrfs-stale ]] && ((`ls -AUq /nocow/btrfs-stale|wc -l`)); then
+ ps_char="! $ps_char"
+ fi
+ PS1="${PS1%"${PS1#*[wW]}"} \[$ps_color\]$ps_char\[$(get_term_color nocolor)\] "
+ # emacs completion doesn't like the git prompt atm, so disabling it.
+ #PS1="${PS1%"${PS1#*[wW]}"}$(__git_ps1 ' (%s)') \[$ps_color\]$ps_char\[$(get_term_color nocolor)\] "
}
PROMPT_COMMAND=prompt_command
fi
+
###########################################
# stuff that makes sense to be at the end #
###########################################
if [[ "$SUDOD" ]]; then
cd "$SUDOD"
+ unset SUDOD
elif [[ -d /a ]] && [[ $PWD == $HOME ]] && [[ $- == *i* ]]; then
cd /a
fi
if [[ $SOE ]]; then
errcatch
fi
+
+# I'd prefer to have system-wide, plus user ruby, due to bug in it
+# https://github.com/rubygems/rubygems/pull/1002
+# further problems: installing multi-user ruby and user ruby,
+# you don't get multi-user ruby when you sudo to root, unless its sudo -i.
+# There a third hybrid form, which passenger error suggested I use,
+# but it didn't actually work.
+
+# in cased I never need this
+# rvm for non-interactive shell: modified from https://rvm.io/rvm/basics
+#if [[ $(type -t rvm) == file && ! $(type -t ruby) ]]; then
+# source $(rvm 1.9.3 do rvm env --path)
+#fi
+
+# based on warning from rvmsudo
+export rvmsudo_secure_path=1
+
+# for other script I wrote
+#export ACME_TINY_PATH=/a/opt/acme-tiny
+export ACME_TINY_WRAPPER_CERT_DIR=/p/c/machine_specific/$HOSTNAME/webservercerts
+
+if [[ -s "/usr/local/rvm/scripts/rvm" ]]; then
+ source "/usr/local/rvm/scripts/rvm"
+elif [[ -s $HOME/.rvm/scripts/rvm ]]; then
+ source $HOME/.rvm/scripts/rvm
+fi
+
+
+path_add --end ~/.npm-global
+
+
+# didn't get drush working, if I did, this seems like the
+# only good thing to include for it.
+# Include Drush completion.
+# if [ -f "/home/ian/.drush/drush.complete.sh" ] ; then
+# source /home/ian/.drush/drush.complete.sh
+# fi
+
+
+# https://wiki.archlinux.org/index.php/Xinitrc#Autostart_X_at_login
+# i added an extra condition as gentoo xorg guide says depending on
+# $DISPLAY is fragile.
+if [[ ! $DISPLAY && $XDG_VTNR == 1 ]] && shopt -q login_shell && isarch; then
+ exec startx
+fi
+
+
+# ensure no bad programs appending to this file will have an affect
+return 0