+ arch) pi syncthing ;;
+ trisquel|ubuntu|debian)
+ # testing has relatively up to date packages
+ if ! isdebian-testing; then
+ # based on error when doing apt-get update:
+ # E: The method driver /usr/lib/apt/methods/https could not be found.
+ pi apt-transport-https
+ # google led me here:
+ # https://apt.syncthing.net/
+ curl -s https://syncthing.net/release-key.txt | sudo apt-key add -
+ s="deb http://apt.syncthing.net/ syncthing release"
+ if [[ $(cat /etc/apt/sources.list.d/syncthing.list) != $s ]]; then
+ echo "$s" | s dd of=/etc/apt/sources.list.d/syncthing.list
+ p update
+ fi
+ fi
+ pi syncthing
+ ;;
+ esac
+ lnf -T /w/syncthing /home/iank/.config/syncthing
+ ser daemon-reload # syncthing likely not properly packaged
+ sgo syncthing@iank # runs as iank
+
+ # these things persist in ~/.config/syncthing, which I save in
+ # /w/syncthing (not in /p, because syncthing should continue to
+ # run on home server even when using laptop as primary device)
+ # open http://localhost:8384/
+ # change listen address from default to tcp://:22001,
+ # this is because we do port forward so it doesn\'t have to use
+ # some external server, but the syncthing is broken for port forward,
+ # you get a message, something "like connected to myself, this should not happen"
+ # when connecting to other local devices, so I bump the port up by 1,
+ # based on
+ # https://forum.syncthing.net/t/connected-to-myself-should-not-happen/1763/19.
+ # Without this, it was being stuck syncing at 0%.
+ # Set gui username and password.
+ #
+ # install syncthing via f-droid,
+ # folder setting, turn off send only.
+ # on phone, add device, click bar code icon
+ # on dekstop, top right, actions, device id
+ # after adding, notification will appear on desktop to confirm
+ #
+ # syncing folder. from phone to desktop: select desktop in the
+ # folder on phone\'s sync options, notification will appear in
+ # desktop\'s web ui within a minute. For the reverse, the
+ # notification will appear in android\'s notifications, you have to
+ # swipe down and tap it to add the folder. It won\'t appear in the
+ # syncthing ui, which would be intuitive, but don\'t wait for it
+ # there. The notification may not work, instead open the web gui
+ # from in the app, there should be a notification within there.
+ #
+ # On phone, set settings to run syncthing all the time, and
+ # show no notification.
+ #
+ # Folder versioning would make sense if I didn\'t already use btrfs
+ # for backups. I would choose staggered, or trash can for more space.
+ #
+ # if needed to install on a remote comp:
+ # ssh -L 8384:localhost:8384 -N frodo
+ # open http://localhost:8384/
+ #
+ # Note, the other thing i did was port forward port 22000,
+ # per https://docs.syncthing.net/users/firewall.html
+
+fi
+############# end syncthing setup ###########
+
+
+
+####### begin misc packages ###########
+
+reset-sakura
+sudo -u traci -i reset-sakura
+reset-konsole
+sudo -u traci -i reset-konsole
+reset-xscreensaver
+# this is packaged, but i see it's gotten a fair amount of development lately,
+# so install from cabal. the options are needed to get over incompatible xmonad library versions
+# but that stuff is in the global namespace, and it seems they don't conflict in practice.
+pi libxss-dev # dependency based on build failure
+cabal update
+cabal install --upgrade-dependencies --force-reinstalls arbtt
+lnf -T /m/arbtt-capture.log ~/.arbtt/capture.log
+
+if [[ ! -e ~/.linphonerc && -e /p/.linphonerc-initial ]]; then
+ cp /p/.linphonerc-initial ~/.linphonerc
+fi
+
+
+### begin spd install
+pi libswitch-perl libdigest-md5-file-perl libgnupg-interface-perl
+t=$(mktemp)
+wget -O $t http://mirror.fsf.org/fsfsys-trisquel/fsfsys-trisquel/pool/main/s/spd-perl/spd-perl_0.2-1_amd64.deb
+s dpkg -i $t
+rm $t
+# this guesses at the appropriate directory, adjust if needed
+x=(/usr/lib/x86_64-linux-gnu/perl/5.*)
+sudo ln -sf ../../../perl/5.18.2/SPD/ $x
+# newer distro had gpg2 as default, older one, flidas, need to make it that way
+x=$(which gpg2)
+if [[ $x ]]; then
+ s lnf -T $x /usr/local/bin/gpg
+fi
+### end spd install
+
+
+if [[ $HOSTNAME == kw ]]; then
+ cat <<'EOF'
+NOTE: after this finishes, i did
+s nmtui-connect
+# remove br from auto:
+s vim /etc/network/interfaces
+EOF
+fi
+
+# nagstamon setting which were set through the ui
+# in filters tab:
+# all unknown sources
+# all warning services
+# acknowledged hosts & services
+# hosts & services down for maintenence
+# services on down hosts
+# services on hosts in maintenece
+# services on unreachable osts
+# hosts in soft state
+# services in soft state
+# in display tab: fullscreen
+
+# these translate to these settings I think
+# filter_acknowledged_hosts_services = True
+# filter_all_unknown_services = True
+# filter_all_warning_services = True
+# filter_hosts_in_soft_state = True
+# filter_hosts_services_maintenance = True
+# filter_services_in_soft_state = True
+# filter_services_on_down_hosts = True
+# filter_services_on_hosts_in_maintenance = True
+# filter_services_on_unreachable_hosts = True
+# notify_if_up = False
+# statusbar_floating = False
+# fullscreen = True
+# but i'm just going to rely on the webpage plus sms for now.
+
+
+case $distro in
+ debian|trisquel|ubuntu)
+ # it asks if it should make users in it's group capture packets without root,
+ # which is arguably more secure than running wireshark as root. default is no,
+ # which is what i prefer, since I plan to use tcpdump to input to wireshark.
+ s DEBIAN_FRONTEND=noninteractive pi wireshark-gtk
+ ;;
+ # others unknown
+esac
+
+# /run and /dev/shm are listed as required for pulseaudio. All 4 in the group
+# listed in the default config as suggested.
+# /run/usr/1000 i noticed was missing for pulseaudio
+# /run/user/0 just seemed like a not bad idea, given the above
+tu /etc/schroot/desktop/fstab <<'EOF'
+/run /run none rw,bind 0 0
+/run/lock /run/lock none rw,bind 0 0
+/dev/shm /dev/shm none rw,bind 0 0
+/run/shm /run/shm none rw,bind 0 0
+/run/user/1000 /run/user/1000 none rw,bind 0 0
+/run/user/1001 /run/user/1001 none rw,bind 0 0
+/run/user/0 /run/user/0 none rw,bind 0 0
+EOF
+
+mkschroot() {
+ n=$1
+ shift
+ apps=($@)
+ d=/nocow/schroot/$n
+ s dd of=/etc/schroot/chroot.d/$n.conf <<EOF
+[$n]
+description=$n
+type=directory
+directory=$d
+profile=desktop
+preserve-environment=true
+users=$USER,traci
+EOF
+ if [[ -e $d/bin ]]; then
+ s chroot $d apt-get update
+ s chroot $d apt-get -y dist-upgrade --purge --auto-remove
+ cd; s schroot -c $n -- apt-get install --allow-unauthenticated -y ${apps[@]}
+ else
+ s mkdir -p $d
+ s debootstrap $n $d http://deb.debian.org/debian/
+ cd; s schroot -c $n -- apt-get install --allow-unauthenticated -y ${apps[@]}
+ fi
+ s cp -P {,$d}/etc/localtime
+}
+s dd of=/etc/systemd/system/schrootupdate.service <<'EOF'
+[Unit]
+Description=schrootupdate
+After=multi-user.target
+
+[Service]
+Type=oneshot
+ExecStart=/a/bin/log-quiet/sysd-mail-once schrootupdate /a/bin/distro-setup/schrootupdate
+EOF
+s dd of=/etc/systemd/system/schrootupdate.timer <<'EOF'
+[Unit]
+Description=schrootupdate
+
+[Timer]
+OnCalendar=*-*-* 04:20:00
+
+[Install]
+WantedBy=timers.target
+EOF
+s systemctl daemon-reload
+sgo schrootupdate.timer
+
+
+
+
+# for my roommate
+case $distro in
+ trisquel)
+ mkschroot stretch firefox-esr pulseaudio chromium
+ ;;
+esac
+
+s mkdir -p /nocow/user
+s chown $USER:$USER /nocow/user
+case $distro in
+ debian)
+ case $(debian-codename) in
+ jessie)
+ pi anki
+ ;;
+ *)
+ mkschroot jessie anki pulsaudio mplayer
+ ;;
+ esac
+ ;;
+ trisquel|ubuntu)
+ pi anki
+ ;;
+ # others unknown
+esac
+
+case $distro in
+ debian|trisquel|ubuntu)
+ # note i had to do this, which is persistent:
+ # cd /i/k
+ # s chgrp debian-transmission torrents partial-torrents
+
+ # syslog says things like
+ # 'Failed to set receive buffer: requested 4194304, got 425984'
+ # google suggets giving it even more than that
+ tu /etc/sysctl.conf<<'EOF'