#!/bin/bash
+# note, this script gets piped to bash, so cant cd to current dir
+
+[[ $EUID == 0 ]] || exec sudo "${BASH_SOURCE}" "$@"
set -eE -o pipefail
trap 'echo "$0:$LINENO:error: \"$BASH_COMMAND\" returned $?" >&2' ERR
-case $1 in
+kgped16=false
+fai_action=install
+fai_reboot_arg=,reboot
+while [[ $1 == -* ]]; do
+ case $1 in
-h|--help)
- echo "see help from myfai-chboot"
- exit 0
- ;;
-esac
-
-[[ $EUID == 0 ]] || exec sudo "${BASH_SOURCE}" "$@"
+ echo "see help from myfai-chboot"
+ exit 0
+ ;;
+ -S)
+ fai_action=sysinfo
+ fai_reboot_arg=
+ shift
+ ;;
+ -i) #inventory
+ fai_action=inventory
+ fai_reboot_arg=
+ shift
+ ;;
+ -k)
+ kgped16=true;
+ shift
+ ;;
+ esac
+done
-e() { echo "$@"; "$@"; }
+pre="${0##*/}:"
+m() { printf "$pre %s\n" "$*"; "$@"; }
+e() { printf "$pre %s\n" "$*"; }
+err() { echo "[$(date +'%Y-%m-%d %H:%M:%S%z')]: $pre: $*" >&2; }
host=$1
-type -t host &>/dev/null || apt-get -y install dnsutils
-ip=$(host $host | sed -rn 's/^\S+ has address //p;T;q')
-gateway_ip=$(route -n | sed -rn 's/^0\.0\.0\.0\s+(\S+).*/\1/p')
-my_ip=$(host faiserver $gateway_ip | sed -rn 's/^\S+ has address //p;T;q')
+rm -f /srv/tftp/fai/pxelinux.cfg/*
+if [[ ! $1 ]]; then
+ echo "$0: clearing pxe config and exiting"
+ exit 0
+fi
+
+# assuming ipv4, or else we might need to deal with multiple addresses
+# in an ipv4 + ipv6 network.
+my_ip=$(ip -4 route get 8.8.8.8 | sed -nr 's,^.*src\s+(\S+).*,\1,p')
+if [[ ! $my_ip || $my_ip =~ [[:space:]] ]]; then
+ echo "$0: error: failed to get \$my_ip, got: $my_ip"
+ exit 1
+fi
+
+if [[ $host == default ]]; then
+ ip='*'
+elif [[ $host == [0-9]*.[0-9]*.[0-9]*.[0-9]* ]]; then
+ ip=$host/32
+else
+ type -t host &>/dev/null || apt-get -y install dnsutils
+ ip=$(host $host | sed -rn 's/^\S+ has address //p;T;q' ||:)
+ if [[ ! $ip || $ip =~ [[:space:]] ]]; then
+ echo "$0: error: failed to get \$ip, got: $ip"
+ exit 1
+ fi
+ ip=$ip/32
+ echo "$0: found ip of $host: $ip"
+fi
if modprobe nfsd &>/dev/null; then
- std_arg="-u nfs://faiserver/srv/fai/config"
- root_arg="$my_ip:/srv/fai/nfsroot"
- # fai-setup without -e sets the ip to the local_ip/local_network, eg 192.168.1.3/24
- # I restrict it to one ip as simple but imperfect access control.
+ std_arg="-u nfs://faiserver/srv/fai/config"
+ # nfsv4 wont do rw with overlayfs yet
+ # https://lists.uni-koeln.de/pipermail/linux-fai/2017-March/011641.html
+ root_arg="$my_ip:/srv/fai/nfsroot:vers=3"
+ # fai-setup without -e sets the ip to the local_ip/local_network, eg 192.168.1.3/24
+ # I restrict it to one ip as simple but imperfect access control.
+
+ # we may chattr +i /etc/exports if we dun want it modified
+ # for example, if we made these exports more widely available
+ # while doing multiple installs or a recovery.
+ if [[ -w /etc/exports ]]; then
sed -ri --follow-symlinks '\%^/srv/fai/%d' /etc/exports
cat >>/etc/exports <<EOF
-/srv/fai/config $ip/32(async,ro,no_subtree_check)
-/srv/fai/nfsroot $ip/32(async,ro,no_subtree_check,no_root_squash)
+/srv/fai/config $ip(async,ro,no_subtree_check,no_root_squash)
+/srv/fai/nfsroot $ip(async,ro,no_subtree_check,no_root_squash)
EOF
exportfs -ra
+ fi
+ systemctl start nfs-server # assumes recent os
else
- std_arg="-u http://faiserver:8080/config.tar.gz"
- root_arg="live:http://faiserver:8080/squash.img"
- /a/exe/web-conf -i -p 8080 - apache2 faiserver <<EOF
+ std_arg="-u http://faiserver:8080/config.tar.gz"
+ root_arg="live:http://faiserver:8080/squash.img"
+ /a/exe/web-conf -i -p 8080 - apache2 faiserver <<EOF
<Location />
Deny from all
Allow from $ip
EOF
fi
-rm -f /srv/tftp/fai/pxelinux.cfg/*
-if [[ ! $1 ]]; then
- exit 0
-fi
# man page doesn't explain this, but this deletes & thus disables
# all chboot systems.
-e fai-chboot -Iv $std_arg default # set it to default to get a val out of it next
+m fai-chboot -iv $std_arg default # set it to default to get a val out of it next
kernel=$(fai-chboot -L '^default$' | awk '{print $3}')
default_k_args=$(fai-chboot -L '^default$' | \
- sed -r "s/^(\S+\s+){3}(.*)/\2/")
+ sed -r "s/^(\S+\s+){3}(.*)/\2/")
# example of default_k_args
-# initrd=initrd.img-3.16.0-4-amd64 ip=dhcp root=192.168.1.3:/srv/fai/nfsroot aufs FAI_CONFIG_SRC=nfs://faiserver/srv/fai/config FAI_ACTION=install
+# initrd=initrd.img-3.16.0-4-amd64 ip=dhcp root=192.168.1.3:/srv/fai/nfsroot FAI_CONFIG_SRC=nfs://faiserver/srv/fai/config FAI_ACTION=install
+
+# https://wiki.archlinux.org/index.php/Solid_state_drive#Resolving_NCQ_errors
+# currently on needed on d16 samsung 870 qvo, but better to have this
+# and not wait for more conditions where its needed.
+k_args=(FAI_ACTION=$fai_action libata.force=noncq)
+if $kgped16; then
+ k_args+=(console=tty0 console=ttyS0,115200)
+fi
-k_args=()
for arg in $default_k_args; do
- case $arg in
- # default root arg is /srv/fai/nfsroot
- root=*) k_args+=(root=$root_arg) ;;
- *) k_args+=($arg) ;;
- esac
+ case $arg in
+ # default root arg is /srv/fai/nfsroot
+ root=*) k_args+=(root=$root_arg) ;;
+ *) k_args+=($arg) ;;
+ esac
done
rm -f /srv/tftp/fai/pxelinux.cfg/*
-e fai-chboot -k "${k_args[*]}" -v -f verbose,sshd,createvt,reboot $std_arg $kernel "$host"
+m fai-chboot -k "${k_args[*]}" -v -f verbose,sshd,createvt$fai_reboot_arg $std_arg $kernel "$host"
+
+# this is needed for autodiscover iso. i'm not sure, it might override
+# the fai-chboot method of setting this, i'm not sure.
+echo FAI_ACTION=$fai_action >> /srv/fai/config/class/LAST.var