# modified from upstream fai example
error=0; trap 'error=$(($?>$error?$?:$error))' ERR # save maximum error code
-if ! ifclass STABLE; then
- if ifclass VM; then
- # For a vm, we only get ID_NET_NAME_MAC from below,
- # but when it reboots, it uses ID_NET_NAME_SLOT.
- NIC1=ens3
- else
- # get persistent interface name. Note, these class conditions
- # will need to get modified for new oses. testing vm doesn't use
- # it right now, but other vms do I'm sure.
- for field in ID_NET_NAME_FROM_DATABASE \
- ID_NET_NAME_ONBOARD \
- ID_NET_NAME_SLOT \
- ID_NET_NAME_PATH \
- ID_NET_NAME_MAC; do
- name=$(udevadm info /sys/class/net/$NIC1 | sed -rn "s/^E: $field=(.+)/\1/p")
- if [[ $name ]]; then
- NIC1=$name
- break
- fi
- done
- if [[ ! $name ]]; then
- echo "$0: error: could not find systemd predictable network name"
- exit 1
- fi
+netplan_yaml() {
+ # network configuration using ubuntu's netplan.io
+ local IFNAME="$1"
+ local METHOD="$2"
+ echo "Generating netplan configuration for $IFNAME ($METHOD)" >&2
+ echo "# generated by FAI"
+ echo "network:"
+ echo " version: 2"
+ echo " renderer: $RENDERER"
+ case "$RENDERER" in
+ networkd)
+ echo " ethernets:"
+ echo " $IFNAME:"
+ case "$METHOD" in
+ dhcp)
+ echo " dhcp4: true"
+ ;;
+ static)
+ echo " addresses: [$CIDR]"
+ echo " gateway4: $GATEWAYS_1"
+ echo " nameservers:"
+ echo " search: [$DOMAIN]"
+ echo " addresses: [${DNSSRVS// /, }]"
+ ;;
+ esac
+ esac
+}
+
+iface_stanza() {
+ # classic network configuration using /etc/network/interfaces
+ local IFNAME="$1"
+ local METHOD="$2"
+ echo "Generating interface configuration for $IFNAME ($METHOD)" >&2
+ echo "# generated by FAI"
+ echo "auto $IFNAME"
+ echo "iface $IFNAME inet $METHOD"
+ case "$METHOD" in
+ static)
+ echo " address $IPADDR"
+ echo " netmask $NETMASK"
+ echo " broadcast $BROADCAST"
+ echo " gateway $GATEWAYS"
+ ;;
+ esac
+}
+
+newnicnames() {
+
+ # determine predictable network names only for stretch and above
+
+ [ $do_init_tasks -eq 0 ] && return
+ [ -z "$NIC1" ] && return
+ ver=$($ROOTCMD dpkg-query --showformat='${Version}' --show udev)
+ if dpkg --compare-versions $ver lt 220-7; then
+ return
fi
+
+
+ fields="ID_NET_NAME_FROM_DATABASE ID_NET_NAME_ONBOARD ID_NET_NAME_SLOT ID_NET_NAME_PATH"
+ for field in $fields; do
+ name=$(udevadm info /sys/class/net/$NIC1 | sed -rn "s/^E: $field=(.+)/\1/p")
+ if [[ $name ]]; then
+ NIC1=$name
+ break
+ fi
+ done
+ if [[ ! $name ]]; then
+ echo "$0: error: could not find systemd predictable network name. Using $NIC1."
+ fi
+}
+
+if [ -z "$NIC1" ]; then
+ echo "WARNING: \$NIC1 is not defined. Cannot add ethernet to /etc/network/interfaces."
fi
+CIDR=$(ip -o -f inet addr show $NIC1 | awk '{print $4}')
+newnicnames
+
+case "$FAI_ACTION" in
+ install|dirinstall)
+ ifclass DHCPC && METHOD=dhcp || METHOD=static
+ ifclass XORG && RENDERER=NetworkManager || RENDERER=networkd
-if ifclass DHCPC && [ $FAI_ACTION = "install" -o $FAI_ACTION = "dirinstall" ]
-then
- if ifclass VM; then
+ if [ -d $target/etc/netplan ]; then
+ # Ubuntu >= 17.10 with netplan.io
+ if [ -n "$NIC1" ]; then
+ netplan_yaml $NIC1 $METHOD > $target/etc/netplan/01-${NIC1}.yaml
+ fi
+ elif [ -d $target/etc/network/interfaces.d ]; then
+ # ifupdown >= 0.7.41 (Debian >= 8, Ubuntu >= 14.04)
+
+ if ifclass VM || ifclass BUSTER_LINODE; then
+ # note, this condition would apply to the elif below too,
+ # but I don't specify a static ip in fai, so not bothering
cat > $target/etc/network/interfaces <<-EOF
- # generated by FAI
- auto lo $NIC1
- iface lo inet loopback
- iface $NIC1 inet dhcp
+# generated by FAI
+auto lo $NIC1
+iface lo inet loopback
+iface $NIC1 inet dhcp
+iface $NIC1 inet6 auto
EOF
- else
- cat > $target/etc/network/interfaces <<-EOF
- # generated by FAI
- auto lo br0
- iface lo inet loopback
- iface $NIC1 inet manual
- # make a bridge by default so we can have bridged vms.
- # Some example I read had stp on, but i don't need stp,
- # and it causes a vm to fail pxe boot, presumably unless
- # you add some delay.
- # http://wiki.libvirt.org/page/PXE_boot_%28or_dhcp%29_on_guest_failed
- iface br0 inet dhcp
- bridge_ports $NIC1
- bridge_stp off
- bridge_maxwait 0
+ else
+ cat > $target/etc/network/interfaces <<EOF
+# generated by FAI
+auto lo br0
+iface lo inet loopback
+iface $NIC1 inet manual
+# make a bridge by default so we can have bridged vms.
+# Some example I read had stp on, but i don't need stp,
+# and it causes a vm to fail pxe boot, presumably unless
+# you add some delay.
+# http://wiki.libvirt.org/page/PXE_boot_%28or_dhcp%29_on_guest_failed
+iface br0 inet dhcp
+ bridge_ports $NIC1
+ bridge_stp off
+ bridge_maxwait 0
EOF
+ fi
+ else
+ (
+ iface_stanza lo loopback
+ iface_stanza $NIC1 $METHOD
+ ) > $target/etc/network/interfaces
fi
-elif [ $FAI_ACTION = "install" -o $FAI_ACTION = "dirinstall" ]
-then
- [ -n "$IPADDR" ] && cat > $target/etc/network/interfaces <<-EOF
- # generated by FAI
- auto lo $NIC1
- iface lo inet loopback
- iface $NIC1 inet static
- address $IPADDR
- netmask $NETMASK
- broadcast $BROADCAST
- gateway $GATEWAYS
-EOF
- [ -n "$NETWORK" ] && echo "localnet $NETWORK" > $target/etc/networks
- if [ ! -L $target/etc/resolv.conf -a -e /etc/resolv.conf ]; then
- cp -p /etc/resolv.conf $target/etc
+
+ if ! ifclass DHCPC ; then
+ [ -n "$NETWORK" ] && echo "localnet $NETWORK" > $target/etc/networks
+ if [ ! -L $target/etc/resolv.conf -a -e /etc/resolv.conf ]; then
+ cp -p /etc/resolv.conf $target/etc
+ fi
fi
-fi
+ ;;
+
+ if ifclass BUSTER_LINODE; then
+ f=/etc/initramfs-tools/initramfs.conf
+ ainsl $f
+ fi
+
+esac
# here fcopy is mostly used, when installing a client for running in a
# different subnet than during the installation