Pin: release n=bionic
Pin-Priority: 500
EOF
-
+ ;;
+ nabia)
+ # note, to get the latest, it would be n=bullseye*
+ # but that has conflicting package versions, so this does the old one.
+ # I only use it for special rare purposes. Just keep in mind it is an
+ # outdated insecure version.
+ sd /etc/apt/preferences.d/chromium-bullseye <<EOF
+Package: chromium chromium-* libicu67 libjpeg62-turbo libjsoncpp24 libre2-9 libwebpmux3
+Pin: release o=Debian*,n=bullseye
+Pin-Priority: 500
+EOF
;;
esac
if [[ ! -e /etc/systemd/system/wg-quick@wghole.service.d/override.conf ]]; then
reload=true
fi
+ sudo mkdir -p /etc/systemd/system/wg-quick@wghole.service.d
sd /etc/systemd/system/wg-quick@wghole.service.d/override.conf <<'EOF'
[Unit]
StartLimitIntervalSec=0
[Service]
-Restart=always
+Restart=on-failure
RestartSec=20
EOF
if $reload; then ser daemon-reload; fi
if [[ ! -e $f ]]; then
dnsb8
fi
+
+ pi prometheus-node-exporter
+ /a/bin/buildscripts/prom-node-exporter -l
+
+ # ex for exporter
+ web-conf -p 9101 -f 9100 - apache2 ${HOSTNAME}ex.b8.nz <<'EOF'
+<Location "/">
+AuthType Basic
+AuthName "basic_auth"
+# created with
+# htpasswd -c prometheus-export-htpasswd USERNAME
+AuthUserFile "/etc/prometheus-export-htpasswd"
+Require valid-user
+</Location>
+EOF
;;&
+
bk)
sgo wg-quick@wgmail
# https://wiki.znc.in/self-message
# https://wiki.znc.in/Query_buffers \
#
+ # for geekshed, there was no sasl support as far as I can tell,
+ # so I set to msg nickserv to identify upon connect.
if ! getent passwd znc > /dev/null; then
sudo useradd --create-home -d /var/lib/znc --system --shell /sbin/nologin --comment "Account to run ZNC daemon" --user-group znc
fi
# Pin: release o=LP-PPA-system76-dev-stable
# Pin-Priority: 1001
# EOF
+ #
+ # TODO: I had to uninstall linux-image-generic-hwe-20.04 because of a conflict
+ # about linux-firmware. Should probably install it to begin with in fai if
+ # i'm going to use.
pi system76-driver system76-firmware
# if you get a notice about a firmware update, the notifier on i3
# is too dumb to do anything when you click it. so to see
# cabal update
# cabal install --upgrade-dependencies --force-reinstalls arbtt
# also, i assume syncing this between machines somehow messed up the data.
-if mountpoint /p &>/dev/null; then
- case $codename in
- etiona|nabia)
- pi arbtt
- # same as seru enable arbtt, but works over ssh when systemctl --user causes error:
- # Failed to connect to bus: No such file or directory
- lnf -T /a/bin/ds/subdir_files/.config/systemd/user/arbtt.service /home/iank/.config/systemd/user/default.target.wants/arbtt.service
- # allow failure
- seru start arbtt ||:
- ;;
- esac
-fi
+
+## not using arbtt for now
+# if mountpoint /p &>/dev/null; then
+# case $codename in
+# etiona|nabia)
+# pi arbtt
+# # same as seru enable arbtt, but works over ssh when systemctl --user causes error:
+# # Failed to connect to bus: No such file or directory
+# lnf -T /a/bin/ds/subdir_files/.config/systemd/user/arbtt.service /home/iank/.config/systemd/user/default.target.wants/arbtt.service
+# # allow failure
+# seru start arbtt ||:
+# ;;
+# esac
+# fi
+rm -fv /home/iank/.config/systemd/user/default.target.wants/arbtt.service
m primary-setup
/run/user/0 /run/user/0 none rw,bind 0 0
EOF
+# todo: consider if this should use the new sysd-prom-fail
sd /etc/systemd/system/schrootupdate.service <<'EOF'
[Unit]
Description=schrootupdate
Description=schrootupdate
[Timer]
-OnCalendar=*-*-* 04:20:00
+OnCalendar=*-*-* 04:20:00 America/New_York
[Install]
WantedBy=timers.target
EOF
s schroot -c flidas locale-gen
s schroot -c flidas update-locale LANG=en_US.UTF-8
+
+ m mkschroot -s /a/bin/fai/fai/config/files/etc/apt/sources.list.d/testing.list/TESTING_NONFREE debian unstable debootstrap
+ sudo cp -a /nocow/schroot/unstable/usr/share/debootstrap/scripts/* /usr/share/debootstrap/scripts
+
+ m mkschroot -s /a/bin/fai/fai/config/files/etc/apt/sources.list.d/impish.list/IMPISH ubuntu impish
+
;;
esac
;;
#
# Changed the cache-size to 256 mb, reduces disk use.
# It is a read & write cache.
-sudo ruby <<EOF
+if ! systemctl is-active transmission-daemon-nn &>/dev/null && \
+ ! systemctl is-active transmission-daemon; then
+ tmp=$(mktemp)
+ command sudo ruby <<EOF >$tmp
require 'json'
p = '/etc/transmission-daemon/settings.json'
-File.write(p, JSON.pretty_generate(JSON.parse(File.read(p)).merge({
-'rpc-whitelist-enabled' => false,
-'rpc-authentication-required' => false,
-'incomplete-dir' => '$tdir/partial-torrents',
-'incomplete-dir-enabled' => true,
-'download-dir' => '$tdir/torrents',
-"speed-limit-up" => 800,
-"speed-limit-up-enabled" => true,
-"peer-port" => 61486,
-"cache-size-mb" => 256,
-"ratio-limit" => 5.0,
-"ratio-limit-enabled" => false,
-})) + "\n")
+s = {
+ 'rpc-whitelist-enabled' => false,
+ 'rpc-authentication-required' => false,
+ 'incomplete-dir' => '$tdir/partial-torrents',
+ 'incomplete-dir-enabled' => true,
+ 'download-dir' => '$tdir/torrents',
+ "speed-limit-up" => 800,
+ "speed-limit-up-enabled" => true,
+ "peer-port" => 61486,
+ "cache-size-mb" => 256,
+ "ratio-limit" => 5.0,
+ "ratio-limit-enabled" => false,
+}
+puts(JSON.pretty_generate(JSON.parse(File.read(p)).merge(s)))
EOF
+ cat $tmp | sudo dd of=/etc/transmission-daemon/settings.json
+
+fi
####### end transmission
m /a/bin/buildscripts/misc
m /a/bin/buildscripts/pithosfly
#m /a/bin/buildscripts/alacritty
-m /a/bin/buildscripts/kitty
+#m /a/bin/buildscripts/kitty
pi-nostart virtinst virt-manager
soff libvirtd
m /a/bin/distro-setup/mymimes
-sgo dynamicipupdate.timer
-
-
# stop autopoping windows when i plug in an android phone.
# dbus-launch makes this work within an ssh connection, otherwise you get this message,
# with still 0 exit code.
grub-pc grub-pc/install_devices multiselect ${devs[*]}
EOF
-# btrfs maintenance
-sgo btrfsmaint.timer
-sgo btrfsmaintstop.timer
-sgo systemstatus.timer
+sysd-prom-fail-install dynamicipupdate
+sysd-prom-fail-install systemstatus
+sysd-prom-fail-install btrfsmaintstop
+sgo btrfsmaint.timer
+sgo btrfsmaintstop
+sgo systemstatus
+sgo dynamicipupdate
if grep -xFq $HOSTNAME /a/bin/ds/machine_specific/btrbk.hosts; then
;;
esac
+### begin prometheus ###
+
+case $HOSTNAME in
+ kd)
+ /a/bin/buildscripts/prometheus
+ # Font awesome is needed for the alertmanager ui.
+ pi prometheus-alertmanager prometheus prometheus-node-exporter fonts-font-awesome
+ web-conf -p 9091 -f 9090 - apache2 i.b8.nz <<'EOF'
+<Location "/">
+AuthType Basic
+AuthName "basic_auth"
+# created with
+# htpasswd -c prometheus-htpasswd USERNAME
+AuthUserFile "/etc/prometheus-htpasswd"
+Require valid-user
+</Location>
+EOF
+
+ web-conf -p 9094 -f 9093 - apache2 i.b8.nz <<'EOF'
+<Location "/">
+AuthType Basic
+AuthName "basic_auth"
+# created with
+# htpasswd -c prometheus-htpasswd USERNAME
+AuthUserFile "/etc/prometheus-htpasswd"
+Require valid-user
+</Location>
+EOF
+
+ # by default, the alertmanager web ui is not enabled other than a page
+ # that suggests to use the amtool cli. that tool is good, but you cant
+ # silence things nearly as fast.
+ if [[ ! -e /usr/share/prometheus/alertmanager/ui/index.html ]]; then
+ sudo chroot /nocow/schroot/bullseye prometheus-alertmanager
+ sudo chroot /nocow/schroot/bullseye /usr/share/prometheus/alertmanager/generate-ui.sh
+ sudo rsync -avih /nocow/schroot/bullseye/usr/share/prometheus/alertmanager/ui/ /usr/share/prometheus/alertmanager/ui
+ ser restart prometheus-alertmanager
+ fi
+
+ for ser in prometheus-node-exporter prometheus-alertmanager prometheus; do
+ sysd-prom-fail-install $ser
+ done
+
+ ;;
+ *)
+ pi prometheus-node-exporter
+ ;;
+esac
+
+case $HOSTNAME in
+ # frodo needs upgrade first.
+ frodo) : ;;
+ # todo, for limiting node exporter http,
+ # either use iptables or, in
+ # /etc/default/prometheus-node-exporter
+ # listen on the wireguard interface
+ *)
+ wgip=$(command sudo sed -rn 's,^ *Address *= *([^/]+).*,\1,p' /etc/wireguard/wghole.conf)
+ # old filename. remove once all hosts are updated.
+ s rm -fv /etc/apache2/sites-enabled/${HOSTNAME}wg.b8.nz.conf
+ web-conf -i -a $wgip -p 9101 -f 9100 - apache2 ${HOSTNAME}wg.b8.nz <<'EOF'
+<Location "/">
+AuthType Basic
+AuthName "basic_auth"
+# created with
+# htpasswd -c prometheus-export-htpasswd USERNAME
+AuthUserFile "/etc/prometheus-export-htpasswd"
+Require valid-user
+</Location>
+EOF
+ # For work, i think we will just use the firewall for hosts in the main data center, and
+ # vpn for hosts outside it.
+
+ # TODO: figure out how to detect the ping failure and try again.
+
+ # Binding to the wg interface, it might go down, so always restart, and wait for it on boot.
+ s mkdir /etc/systemd/system/apache2.service.d
+ sd /etc/systemd/system/apache2.service.d/restart.conf <<EOF
+[Unit]
+After=wg-quick@wghole.service
+StartLimitIntervalSec=0
+
+[Service]
+Restart=always
+RestartSec=30
+EOF
+
+ ;;
+esac
+
+### end prometheus ###
+
+
end_msg <<'EOF'
In mate settings settings, change scrolling to two-finger,
because the default edge scroll doesn\'t work. Originally found this in debian.
# nfs server
pi-nostart nfs-kernel-server
+# todo, this is old, probably needs removing
if [[ $HOSTNAME == tp ]]; then
sd /etc/wireguard/wg0.conf <<EOF
[Interface]