export LC_USEBASHRC=t; if [[ -s ~/.bashrc ]]; then . ~/.bashrc; fi
### setup
-source /a/bin/errhandle/err
+source /a/bin/bash-bear-trap/bash-bear
src="$(readlink -f -- "${BASH_SOURCE[0]}")"; src=${src%/*} # directory of this file
if [[ $EUID == 0 ]]; then
########### begin section including vps ################
pi ${p2[@]}
-
conflink
sudo rm -fv
##### begin automatic upgrades (after checkrestart has been installed) ####
# if apt-config-auto-update is installed,
# it also has similar config, in a file 10something,
-# but i think his overrides it since its higher number.
+# but i think this overrides it since its higher number.
# This file was part of the automatic-updates package,
-# and it has a configu option to not get new package lists,
+# and it has a config option to not get new package lists,
# which seems pretty stupid to me, you cant actually upgrade
# anything if you dont have the new package list.
sd /etc/apt/apt.conf.d/20auto-upgrades <<'EOF'
+# note: man apt.conf says
+# /usr/share/doc/apt/examples/configure-index.gz is a configuration file showing
+# example values for all possible options.
+# but that is a incorrect.
+# Periodic and other options are only documented in
+# /usr/lib/apt/apt.systemd.daily
+# That filename can be found through poking around in apt daily cronjob.
APT::Periodic::Update-Package-Lists "1";
APT::Periodic::Download-Upgradeable-Packages "1";
-APT::Periodic::AutocleanInterval "7";
+# 0 means disabled. I used to set this to 7, however, trisquel doesn't
+# have an archive of old package versions, so I want to
+# keep around old versions so I can easily downgrade.
+APT::Periodic::AutocleanInterval "0";
+# daily expire old files /var/cache/apt if it gets above this MB
+APT::Periodic::MaxSize "50000";
APT::Periodic::Unattended-Upgrade "1";
EOF
dnsb8
fi
- pi prometheus-node-exporter
- /a/bin/buildscripts/prom-node-exporter -l
+ sudo /c/roles/prom_export/files/simple/usr/local/bin/fsf-install-node-exporter -l 127.0.0.1
# ex for exporter
web-conf -p 9101 -f 9100 - apache2 ${HOSTNAME}ex.b8.nz <<'EOF'
;;
li)
+ p build-dep eggdrop
+ if [[ ! -L ~/eggdrop/eggdrop ]]; then
+ cd
+ git clone https://github.com/eggheads/eggdrop eggdrop-src
+ cd eggdrop-src
+ ./configure
+ make config
+ make
+ make install
+ fi
+
+ # dunno if this is really needed. it was part of the documented eggdrop systemd install script
+ sudo loginctl enable-linger
+ systemctl --user enable fsysbot
+ systemctl --user start fsysbot
+
m /a/h/setup.sh iankelling.org
# start mumble only when im going to use it, since i dont use it much
client-to-client
EOF
- sd /etc/openvpn/client-config-hole/kd <<'EOF'
-ifconfig-push 10.5.5.2 255.255.255.0
-EOF
- sd /etc/openvpn/client-config-hole/tp <<'EOF'
-ifconfig-push 10.5.5.3 255.255.255.0
-EOF
- sd /etc/openvpn/client-config-hole/frodo <<'EOF'
-ifconfig-push 10.5.5.5 255.255.255.0
-EOF
- sd /etc/openvpn/client-config-hole/x2 <<'EOF'
-ifconfig-push 10.5.5.7 255.255.255.0
-EOF
- sd /etc/openvpn/client-config-hole/x3 <<'EOF'
-ifconfig-push 10.5.5.8 255.255.255.0
-EOF
- sd /etc/openvpn/client-config-hole/kw <<'EOF'
-ifconfig-push 10.5.5.9 255.255.255.0
-EOF
- sd /etc/openvpn/client-config-hole/sy <<'EOF'
-ifconfig-push 10.5.5.12 255.255.255.0
-EOF
- sd /etc/openvpn/client-config-hole/bo <<'EOF'
-ifconfig-push 10.5.5.13 255.255.255.0
-EOF
- sd /etc/openvpn/client-config-hole/onep9 <<'EOF'
-ifconfig-push 10.5.5.14 255.255.255.0
+
+ ngset
+ files=(/etc/openvpn/client-config-hole/*)
+ if (( ${#files[@]} >= 1 )); then
+ rm -f ${files[@]}
+ fi
+ ngreset
+ for host in ${!vpn_ips[@]}; do
+ sd /etc/openvpn/client-config-hole/$host <<EOF
+ifconfig-push 10.5.5.${vpn_ips[$host]} 255.255.255.0
EOF
- # todo: add x8?
+ done
# for adding cert to system with /p
#
# for wireguard hole vpn, use function:
# wghole
+ # eg:
+ # wghole bo 28
+ # if it is going to want to connect to transmission-daemon on ok
+ # wghole bo 28 10.174.2.2/32
# requested from linode via a support ticket.
# https://www.linode.com/docs/networking/an-overview-of-ipv6-on-linode/
end
;;
esac
+
+case $HOSTNAME in
+ bk)
+ pi icecast2
+ # todo, save the config
+ /etc/cron.daily/stream-cert
+ web-conf -c /etc/cert-live.fsf.org -p 443 -f 8000 apache2 live.fsf.org
+ ;;
+esac
+
###### end website setup
########### end section including li/lj ###############
####### begin misc packages ###########
+# old location, 2023.
+sudo rm -fv /etc/systemd/system/profanity.service
+case $HOSTNAME in
+ kd)
+ ln -sfT /d/p/profanity ~/.local/share/profanity
+ ln -sfT /d/p/profanity-config ~/.config/profanity
+ source /a/bin/bash_unpublished/source-state
+ if [[ $HOSTNAME == "$HOST2" || ! -e /p/profanity-here ]]; then
+ systemctl --user --now enable profanity
+ fi
+ ;;
+ *)
+
+ ln -sfT /p/profanity ~/.local/share/profanity
+ ln -sfT /p/profanity-config ~/.config/profanity
+ ;;
+esac
+
# template
case $codename in
flidas)
#
# Changed the cache-size to 256 mb, reduces disk use.
# It is a read & write cache.
+#
+# just fyi: default rpc port is 9091
if ! systemctl is-active transmission-daemon-nn &>/dev/null && \
! systemctl is-active transmission-daemon; then
tmp=$(mktemp)
######### begin transmission client setup ######
+# to connect from a remote client, trans-remote-route in brc2
+
+
if [[ -e /p/transmission-rpc-pass ]]; then
# arch had a default config,
# debian had nothing until you start it.
"profiles" : [
{
"profile-name" : "Default",
- "hostname" : "10.173.0.2",
+ "hostname" : "10.174.2.2",
"rpc-url-path" : "/transmission/rpc",
"username" : "",
"password" : "$rpc_pass",
# general known for debian/ubuntu, not for fedora
m /a/bin/buildscripts/go
+# only needed for rg. cargo takes up 11 gigs, filled up the disk on je.
m /a/bin/buildscripts/rust
m /a/bin/buildscripts/misc
m /a/bin/buildscripts/pithosfly
########### misc stuff
+
+xdg-settings set default-web-browser abrowser.desktop
+# see current with:
+# xdg-settings get default-web-browser
+
# pressing tab after sdf here:
# scp sdfbash: set +o noglob: command not found
# in t11, bash 5.1.16. this fixes it.
rm -r "$tmpdir"
fi
+# get rid of annoying message
+s sed -ri "s/^([[:space:]]*ui.print_\('Playing)/#\1/" /usr/share/beets/beetsplug/play.py
+
+
# notes about barrier
# run barrier, do the gui config,
# setup the 2 screens, using hostnames for the new screen.
if grep -xFq $HOSTNAME /a/bin/ds/machine_specific/btrbk.hosts; then
sgo btrbk.timer
fi
-# note: to see when it was last run,
+
+# note: to see when a timer was last run,
# ser list-timers
-case $HOSTNAME in
- kd)
- sgo btrbkrust.timer
- ;;
-esac
### begin prometheus ###
-
-# cleanup old files. 2023-02
-x=(/var/lib/prometheus/node-exporter/*.premerge)
-if [[ -e ${x[0]} ]]; then
- s rm /var/lib/prometheus/node-exporter/*
-fi
-
-pi prometheus-node-exporter-collectors
case $HOSTNAME in
kd)
# Font awesome is needed for the alertmanager ui.
pi prometheus-alertmanager prometheus fonts-font-awesome
- /a/bin/buildscripts/prometheus
+ /c/roles/prom/files/simple/usr/local/bin/fsf-install-prometheus
+ # make it available for other machines
+ rsync -a /usr/local/bin/amtool /a/opt/bin
web-conf -p 9091 -f 9090 - apache2 i.b8.nz <<'EOF'
<Location "/">
AuthType Basic
ser restart prometheus-alertmanager
fi
- /a/bin/buildscripts/prom-node-exporter -l
+ s /c/roles/prom_export/files/simple/usr/local/bin/fsf-install-node-exporter -l 127.0.0.1
for ser in prometheus-node-exporter prometheus-alertmanager prometheus; do
sysd-prom-fail-install $ser
;;
*)
- /a/bin/buildscripts/prom-node-exporter
+ s /c/roles/prom_export/files/simple/usr/local/bin/fsf-install-node-exporter
;;
esac
+# cleanup old files. 2023-02
+x=(/var/lib/prometheus/node-exporter/*.premerge)
+if [[ -e ${x[0]} ]]; then
+ s rm /var/lib/prometheus/node-exporter/*
+fi
+
+
case $HOSTNAME in
# todo, for limiting node exporter http,
# either use iptables or, in
### begin nagios ###
+pi nagios-nrpe-server
+
case $HOSTNAME in
kd)
- pi nagios4
+ # the backport is for this bug: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=800345
+ pi nagios4 nagios-nrpe-plugin monitoring-plugins-basic/bullseye-backports
s rm -fv /etc/apache2/conf-enabled/nagios4-cgi.conf
# to add a password for admin:
#
AuthDigestDomain "Nagios4"
AuthDigestProvider file
- AuthUserFile "/etc/nagios4/htdigest.users"
+ AuthUserFile "/etc/nagios4-htdigest.users"
AuthGroupFile "/etc/group"
AuthName "Nagios4"
AuthType Digest
# 6 define timeperiod
+
+
### end nagios ###
### begin bitcoin ###
case $HOSTNAME in
- sy)
- f=$dir/bitcoin.conf
- sudo install -m 0755 -o root -g root -t /usr/bin /a/opt/bitcoin-23.0/bin/*
- sgo bitcoind
+ sy|kd)
+ sudo install -m 0755 -o root -g root -t /usr/bin /a/opt/bitcoin-26.0/bin/*
+ # Note: i leave it to system-status to start and stop bitcoin.
+ # note: the bitcoin user & group are setup in fai
sudo usermod -a -G bitcoin iank
- sudo ln -s /q/wallets /var/lib/bitcoind
+ # todo: make bitcoin have a stable uid/gid
+ sudo mkdir -p /var/lib/bitcoind
+ sudo chown bitcoin:bitcoin /var/lib/bitcoind
+ # 710 comes from the upstream bitcoin unit file
+ sudo chmod 710 /var/lib/bitcoind
# note, there exists
# /a/bin/ds/disabled/bitcoin
;;
### end bitcoin
+case $HOSTNAME in
+ kw|x3)
+ sd /etc/cups/client.conf <<'EOF'
+ServerName printserver1.office.fsf.org
+EOF
+ ;;
+esac
+
end_msg <<'EOF'
In mate settings settings, change scrolling to two-finger,