fi
# -q = quiet
journalctl -qn2 -f -u "$cmd_name" &
+ jr_pid=$!
# Trial and error of time needed to avoid missing initial lines.
# .5 was not reliable. 1 was not reliable. 2 was not reliable
sleep 4
- jr_pid=$!
systemd-run --unit "$cmd_name" --wait --collect "$cmd" "$@" || ret=$?
# The sleep lets the journal output its last line
# before the prompt comes up.
done
}
+screenrtp() {
+
+ local ip port xoffset
+ read -r ip port xoffset <<<"$@"
+
+ setxenv
+
+ if [[ ! $port ]]; then
+ port=9999
+ fi
+
+ while true; do
+ # By default, plugged in screen goes to the right side, so we need an
+ # offset that is the same as the laptop's x resolution. If we are in
+ # mirror mode, then we don't need an offset.
+ if [[ ! $xoffset ]]; then
+ xoffset=0
+ laptop_x=$(xrandr | awk '$1 == "LVDS-1" {print $4}' | sed 's/x.*//') || { sleep 1; continue; }
+ total_x=$(xdpyinfo| awk '$1 == "dimensions:" {print $2}' | sed 's/x.*//') || { sleep 1; continue; }
+ screen2_res=$(xrandr | awk '$2 == "connected" && $1 != "LVDS-1" { print $3 }' | sed 's/+.*//')
+ if (( laptop_x < total_x )); then
+ xoffset=$laptop_x
+ fi
+ fi
+
+ m ffmpeg -probesize 50M -thread_queue_size 50 \
+ -video_size $screen2_res -f x11grab -framerate 30 -i :0.0+$xoffset.0 \
+ -vcodec libx264 -g 1 -tune zerolatency -preset ultrafast -pix_fmt yuv420p -x264-params repeat-headers=1 \
+ -f rtp_mpegts rtp://$ip:$port ||:
+
+
+ sleep 1
+ done
+}
+
+setxenv() {
+ if [[ ! $DISPLAY ]]; then
+ export DISPLAY=:0.0
+ fi
+ if [[ ! $XAUTHORITY ]]; then
+ export XAUTHORITY=$HOME/.Xauthority
+ fi
+}
+
#### end fsf section
}
_khfix-common() {
- local host ip port file key tmp
- read -r host ip port < <(timeout -s 9 2 ssh -oBatchMode=yes -oControlMaster=no -oControlPath=/ -v $1 |& sed -rn "s/debug1: Connecting to ([^ ]+) \[([^\]*)] port ([0-9]+).*/\1 \2 \3/p" ||: )
+ local host ip port file key tmp ssh_host alias
+ ssh_host=$1
+ {
+ read -r host ip port
+ read -r alias;
+ # note ":graph:" is needed or else we get a trailing \r out of ssh,
+ # dunno why. web search says terminals add \r, so I tried adding -T
+ # to turn off psuedo terminal, but it didnt help.
+ } < <(timeout -s 9 2 ssh -TN -oBatchMode=yes -oControlMaster=no -oControlPath=/ -v $ssh_host |&
+ sed -rn "s/debug1: Connecting to ([^ ]+) \[([^\]*)] port ([0-9]+).*/\1 \2 \3/p;
+s/^debug1: using hostkeyalias: ([[:graph:]]*).*/\1/p" ||: )
file=$(readlink -f ~/.ssh/known_hosts)
if [[ ! $ip ]]; then
echo "khfix: ssh failed"
return 1
fi
+ ip_entry=$ip
+ host_entry=$host
+ if [[ $alias ]]; then
+ host_entry="$alias"
+ fi
if [[ $port != 22 ]]; then
ip_entry="[$ip]:$port"
- host_entry="[$host]:$port"
- else
- ip_entry=$ip
- host_entry=$host
+ if [[ ! $alias ]]; then
+ host_entry="[$host]:$port"
+ fi
fi
- if [[ $host != "$ip" ]]; then
+ if [[ $host_entry != "$ip_entry" ]]; then
tmp=$(mktemp)
ssh-keygen -F "$host_entry" -f $file >$tmp || [[ $? == 1 ]] # 1 when it doesnt exist in the file
if [[ -s $tmp ]]; then
key=$(sed -r 's/^.*([^ ]+ +[^ ]+) *$/\1/' $tmp)
+ else
+ echo "khfix WARNING: did not find host entry:$host_entry in known_hosts"
fi
rm $tmp
if [[ $key ]]; then
ssh-keygen -F "$ip_entry" -f $file >$tmp || [[ $? == 1 ]]
if [[ -s $tmp ]]; then
key=$(sed -r 's/^.*([^ ]+ +[^ ]+) *$/\1/' $tmp)
+ else
+ echo "khfix WARNING: did not find ip entry:$ip_entry in known_hosts"
fi
rm $tmp
if [[ $key ]]; then
grep -Fv "$key" "$file" | sponge "$file"
fi
- ll ~/.ssh/known_hosts
}
khfix-r() { # known hosts fix without syncing to root user
_khfix-common "$@" || return 1
sed -rn '/testignore|jtuttle|eximbackup/!s/^[^ ]+ ([^ ]+) [^ ]+ [^ ]+ <= ([^ ]+).* id=([^ ]+) T="(.*)" from (<[^ ]+> .*$)/\1 \5\n \3\n \4/p' <${1:-/var/log/exim4/mainlog}
}
etailin() {
- tail -F /var/log/exim4/mainlog | sed -rn '/testignore|jtuttle|eximbackup/!s/^[^ ]+ ([^ ]+) [^ ]+ [^ ]+ <= ([^ ]+).*T="(.*)" from (<[^ ]+> .*$)/\1 \4\n \3/p'
+ local -a tail_arg
+ tail_arg=(-n500)
+ if [[ $1 ]]; then
+ tail_arg=($@)
+ fi
+ tail "${tail_arg[@]}" -F /var/log/exim4/mainlog | sed -rn '/testignore|jtuttle|eximbackup/!s/^[^ ]+ ([^ ]+) [^ ]+ [^ ]+ <= ([^ ]+).*T="(.*)" from (<[^ ]+> .*$)/\1 \4\n \3/p'
}
/usr/bin/nagstamon &
}
-# profanity screen
+# profanity tmux
profsrc() {
- screen -RD -S profanity
+ screen -L profanity a
}
# i dont want to wait for konsole to exit...
systemctl -n 40 status "$@"
}
+# assume last arg is a service and we want to tail its log.
+serj() {
+ local service jr_pid ret
+ ret=0
+ service="${*: -1}"
+ journalctl -qn2 -f -u "$service" &
+ sleep 3
+ s systemctl "$@" || ret=$?
+ sleep .5
+ kill %%
+ (( ret == 0 )) || return $ret
+}
+
seru() { systemctl --user "$@"; }
# like restart, but do nothing if its not already started
srestart() {
slr() {
sl --rsync "$@"
}
-sss() { # ssh solo
- sl -oControlMaster=no -oControlPath=/ "$@"
+
+
+# ssh solo
+#
+# WARNING: If you are trying to use -i, remember that keys added to
+# agent previously will still be tried. Use ssh-add -D to remove all
+# keys from the agent.
+sss() {
+ ssh -oControlMaster=no -oControlPath=/ "$@"
}
# kill off old shared socket then ssh
ssk() {
fi
+
+lp22viewers() {
+ v=0
+ roomv=(0 0)
+ rooms=(jupiter saturn)
+ for ip in 209.51.188.25 live.fsf.org; do
+ out=$(curl -sS --insecure https://$ip/)
+ for i in 0 1 2; do
+ room=${rooms[i]}
+ while read -r n; do
+ v=$((v+n))
+ roomv[$i]=$(( ${roomv[$i]} + n ))
+ done < <(printf "%s\n" "$out" | grep -Po "$room.*?current[^0-9]*[0-9]*" | grep -o '[0-9]*$' )
+ done
+ done
+ printf "total: %s " $v
+ for i in 0 1; do
+ room=${rooms[i]}
+ printf "$room: %s " "${roomv[$i]}"
+ done
+ echo
+}
+
+arpflush() {
+ local default_route_dev
+ default_route_dev=$(ip r show default | sed 's/.*dev \([^ ]*\).*/\1/' | head -n1)
+ m s ip n flush dev "$default_route_dev"
+}
+
+dsh() {
+ command dsh -c "$@"
+}
+
# * stuff that makes sense to be at the end