2 # Copyright (C) 2016 Ian Kelling
4 # Licensed under the Apache License, Version 2.0 (the "License");
5 # you may not use this file except in compliance with the License.
6 # You may obtain a copy of the License at
8 # http://www.apache.org/licenses/LICENSE-2.0
10 # Unless required by applicable law or agreed to in writing, software
11 # distributed under the License is distributed on an "AS IS" BASIS,
12 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 # See the License for the specific language governing permissions and
14 # limitations under the License.
20 exec &> >(sudo
tee -a /var
/log
/distro-end
)
21 echo "$0: $(date): starting now)"
23 src
="${BASH_SOURCE%/*}"
27 IFS
= read -r -d '' y ||
:
31 spa
() { # simple package add
38 sed="sed --follow-symlinks"
62 # swh-plugins is for karaoke pulsaudio filter.
121 transmission-remote-gtk
125 spa $
(apt-cache search ruby
[.0-9]+-doc|
awk '{print $1}')
130 ########### begin section including li ################
135 if [[ `debian-archive` == testing
]]; then
148 # ubuntu 14.04 uses b-cron,
149 # but its not maintained in arch.
150 # of the ones in the main repos, cronie is only one maintained.
151 # fcron appears abandoned software.
155 *) : ;; # other distros come with cron.
185 arch
) spa the_silver_searcher
;;
186 debian|ubuntu
) spa silversearcher-ag
;;
191 debian|ubuntu
) spa ntp
;;
200 # no equivalent in other distros:
204 if ! dpkg
-s apt-file
&>/dev
/null
; then
205 # this condition is just a speed optimization
209 # for debconf-get-selections
215 ubuntu|debian
) spa ack-grep
;;
216 arch|fedora
) spa ack
;;
232 case $
(distro-name
) in
234 # allows me to pipe with ssh -t, and gets rid of spam
235 # http://forums.debian.net/viewtopic.php?f=5&t=85822
236 # i'd rather disable the service than comment the init file
237 # this says disabling the service, it will still get restarted
238 # but this script doesn't do anything on restart, so it should be fine
239 s
dd of
=/var
/run
/motd.dynamic
if=/dev
/null
240 # stretch doesn't have initscripts pkg installed by default
241 if [[ $
(debian-codename
) == jessie
]]; then
242 s update-rc.d motd disable
246 # this isn't a complete solution. It still shows me when updates are available,
247 # but it's no big deal.
248 s t
/etc
/update-motd.d
/10-help-text /etc
/update-motd.d
/00-header
254 # https://debian-handbook.info/browse/stable/sect.regular-upgrades.html
255 # /etc/cron.daily/apt calls unattended-upgrades
256 # /usr/share/doc/unattended-upgrades# cat README.md
257 # /etc/apt/apt.conf.d/50unattended-upgrades
259 setup-debian-auto-update
262 # we've got a few dependencies later on, so install them now.
263 pi
"${simple_packages[@]}"
271 lj
) domain
=iank.bid
; exit 0 ;;
272 li
) domain
=iankelling.org
;;
274 /a
/h
/setup.sh
$domain
277 sudo
-E /a
/bin
/mediawiki-setup
/mw-setup-script
280 pi-nostart mumble-server
281 s
$sed -ri "s/^ *(serverpassword=).*/\1$(< /a/bin/bash_unpublished/mumble_pass)/" /etc
/mumble-server.ini
286 sudo
dd of
=/etc
/systemd
/system
/vpnmail.service
<<EOF
288 Description=Turns on iptables mail nat
293 ExecStart=/a/bin/distro-setup/vpn-mail-forward start
294 ExecStop=/a/bin/distro-setup/vpn-mail-forward stop
297 WantedBy=openvpn.service
300 ser
enable vpnmail.service
301 acme-tiny-wrapper
mail.iankelling.org
302 # needed for li's local mail delivery. there might
303 # be a better way to do it that doesn't require disabling
304 # it during le verification, but whatever for now.
305 f
=/etc
/cron.daily
/lets-encrypt-mail_iankelling_org
306 l
="10.8.0.4 mail.iankelling.org"
307 tu
/etc
/hosts
<<<"$l"
308 s
sed -i '/^\s*sysv acme-tiny-wrapper/i sed -i /^10\.8\.0\.4/d /etc/hosts' $f
309 echo "echo $l >>/etc/hosts" | s
tee -a $f
311 domain
=cal.iankelling.org
312 acme-tiny-wrapper
$domain
313 apache-site
-f 10.8.0.4:5232 - $domain <<'EOF'
314 #https://httpd.apache.org/docs/2.4/mod/mod_authn_core.html#authtype
315 <Directory "/var/www/cal.iankelling.org/html">
316 Options +FollowSymLinks +Multiviews +Indexes
319 AuthName "Authentication Required"
320 # setup one time, with root:www-data, 640
321 AuthUserFile "/etc/caldav-htpasswd"
325 # nginx version of above would be:
326 # auth_basic "Not currently available";
327 # auth_basic_user_file /etc/nginx/caldav/htpasswd;
330 ########## begin pump.io setup ##########
332 # once pump adds a logrotation script, turn off nologger,
334 # "logfile": "/var/log/pumpio/pumpio.log",
336 s
dd of
=/etc
/pump.io.json
<<'EOF'
338 "secret": "SECRET_REPLACE_ME",
340 "params": { "dbname": "pumpio" },
342 "site": "pump.iankelling.org",
343 "owner": "Ian Kelling",
344 "ownerURL": "https://iankelling.org/",
347 "hostname": "pump.iankelling.org",
349 "datadir": "/home/pumpio/pumpdata",
350 "enableUploads": true,
351 "debugClient": false,
352 "disableRegistration": true,
354 "key": "/home/pumpio/pump.iankelling.org-domain.key",
355 "cert": "/home/pumpio/pump.iankelling.org-chained.pem",
356 "address": "localhost",
360 s
sed -i "s#SECRET_REPLACE_ME#$(cat /p/c/machine_specific/li/pump-secret)#" /etc
/pump.io.json
362 # jessie\'s node is too old
363 # https://nodejs.org/en/download/package-manager/
364 curl
-sL https
://deb.nodesource.com
/setup_6.x | sudo
-E bash
-
368 git clone https
://github.com
/pump-io
/pump.io.git
370 # note: doing this or the npm install pump.io as root had problems.
373 # normally, next command would be
374 # s npm install -g databank-mongodb
375 # but it\'s this until a bug in pump gets fixed
376 s npm
install -g databank-mongodb@
0.19.2
377 s useradd
-m -s /bin
/false pumpio
378 sudo
-u pumpio mkdir
-p /home
/pumpio
/pumpdata
379 # for testing browser when only listening to localhost,
380 # in the pump.io.json, set hostname localhost, urlPort 5233
381 #ssh -L 5233:localhost:5233 li
382 acme-tiny-wrapper
-c /home
/pumpio pump.iankelling.org
384 s mkdir
-p /var
/log
/pumpio
/
385 s chown pumpio
:pumpio
/var
/log
/pumpio
/
387 apache-site
-c /home
/pumpio
- pump.iankelling.org
<<'EOF'
388 # currently a bug in pump that we cant terminate ssl
391 ProxyPass / https://127.0.0.1:8001/
392 ProxyPassReverse / https://127.0.0.1:8001/
393 # i have sockjs disabled per people suggesting that
394 # it won\'t work with apache right now.
395 # not sure if it would work with this,
396 # but afaik, this is pointless atm.
397 <Location /main/realtime/sockjs/>
398 ProxyPass wss://127.0.0.1:8001/main/realtime/sockjs/
399 ProxyPassReverse wss://127.0.0.1:8001/main/realtime/sockjs/
403 s
dd of
=/etc
/systemd
/system
/pump.service
<<'EOF'
406 After=syslog.target network.target
412 ExecStart=/home/ian/pump.io/bin/pump
413 Environment=NODE_ENV=production
414 # failed to find databank-mongodb without this.
415 # I just looked at my environment variables took a guess.
416 Environment=NODE_PATH=/usr/lib/nodejs:/usr/lib/node_modules:/usr/share/javascript
419 WantedBy=multi-user.target
423 ########## end pump.io setup ############
426 ############# begin setup mastodon ##############
428 # https://store.docker.com/editions/community/docker-ce-server-debian?tab=description
429 pi software-properties-common
430 curl
-fsSL https
://download.docker.com
/linux
/debian
/gpg | sudo apt-key add
-
431 sudo add-apt-repository \
432 "deb [arch=amd64] https://download.docker.com/linux/debian \
438 # this may not be needed
441 curl
-L https
://github.com
/docker
/compose
/releases
/download
/1.12.0/docker-compose-
`uname -s`-`uname -m` | s
dd of
=/usr
/local
/bin
/docker-compose
442 s
chmod +x
/usr
/local
/bin
/docker-compose
444 # i subscrubed to https://github.com/docker/compose/releases.atom
445 # to deal with updates manually.
448 i clone https
://github.com
/tootsuite
/mastodon
450 # https://github.com/tootsuite/mastodon/tree/v1.1.2
451 # subbed to atom feed to deal with updates
454 # per instructions, uncomment redis/postgres persistence in docker-compose.yml
455 sed -i 's/^#//' docker-compose.yml
457 cat >.env.production
<<'EOF'
466 LOCAL_DOMAIN=mast.iankelling.org
469 SINGLE_USER_MODE=true
474 SMTP_FROM_ADDRESS=notifications@mast.iankelling.org
475 SMTP_DOMAIN=mast.iankelling.org
476 SMTP_DELIVERY_METHOD=smtp
479 for key
in PAPERCLIP_SECRET SECRET_KEY_BASE OTP_SECRET
; do
480 printf "%s=%s" $key "$(docker-compose run --rm web rake secret)" >>.env.production
482 s
cat /etc
/mailpass|
while read -r domain port pass
; do
483 if [[ $domain == mail.iankelling.org
]]; then
484 printf "SMTP_PASSWORD=%s" "$pass" >>.env.production
491 docker-compose run
--rm web rails assets
:precompile
493 # docker daemon takes care of starting on boot.
496 acme-tiny-wrapper mast.iankelling.org
497 s a2enmod proxy_wstunnel headers
498 apache-site
-f 3000 - mast.iankelling.org
<<'EOF'
500 RequestHeader set X-Forwarded-Proto "https"
501 ProxyPass /500.html !
502 ProxyPass /oops.png !
503 ProxyPass /api/v1/streaming/ ws://localhost:4000/
504 ProxyPassReverse /api/v1/streaming/ ws://localhost:4000/
505 ErrorDocument 500 /500.html
506 ErrorDocument 501 /500.html
507 ErrorDocument 502 /500.html
508 ErrorDocument 503 /500.html
509 ErrorDocument 504 /500.html
513 ############### !!!!!!!!!!!!!!!!!
514 ############### manual steps:
516 # only following 2 people atm, so not bothering to figure out backups
517 # when mastodon has not documented it at all.
522 # johns@status.fsf.org
524 # sign in page is at https://mast.iankelling.org/auth/sign_in
525 # register as iank, then
526 # https://github.com/tootsuite/documentation/blob/master/Running-Mastodon/Administration-guide.md
527 # docker-compose run --rm web bundle exec rails mastodon:make_admin USERNAME=iank
529 ############# end setup mastodon ##############
531 echo "$0: $(date): ending now)"
537 ########### end section including li/lj ###############
539 if [[ $HOSTNAME == treetowl
]]; then
540 # note, see bashrc for more documentation.
542 s
dd of
=/etc
/systemd
/system
/rss2email.service
<<'EOF'
544 Description=rss2email
545 After=multi-user.target
550 # about 24 hours of failures
551 ExecStart=/a/bin/log-quiet/sysd-mail-once -288 rss2email r2e run
553 s
dd of
=/etc
/systemd
/system
/rss2email.timer
<<'EOF'
555 Description=rss2email
558 # for initial run. required.
560 # for subsequent runs.
561 OnUnitInactiveSec=300
564 WantedBy=timers.target
566 s systemctl daemon-reload
570 ######### begin pump.io periodic backup #############
571 if [[ $HOSTNAME == treetowl
]]; then
572 s
dd of
=/etc
/systemd
/system
/pumpbackup.service
<<'EOF'
574 Description=pump li backup
575 After=multi-user.target
580 ExecStart=/a/bin/log-quiet/sysd-mail-once pump-backup /a/bin/distro-setup/pump-backup
582 s
dd of
=/etc
/systemd
/system
/pumpbackup.timer
<<'EOF'
584 Description=pump li backup hourly
590 WantedBy=timers.target
592 s systemctl daemon-reload
595 ######### end pump.io periodic backup #############
599 # suggests because we want the resolvconf package.
600 # todo: check other distros to make sure it\'s installed
601 pi-nostart
--install-suggests openvpn
602 # pi-nostart does not disable
608 if private-host
; then
609 vpn-mk-client-cert
-n mail li
610 cn
=$
(s openssl x509
-noout -nameopt multiline
-subject \
611 -in /etc
/openvpn
/client
/mail.crt | \
612 sed -rn 's/^\s*commonName\s*=\s*(.*)/\1/p')
613 echo "ifconfig-push 10.8.0.4 255.255.255.0" | \
614 ssh root@li
dd of
=/etc
/openvpn
/client-config
/"$cn"
617 if [[ $HOSTNAME == treetowl
]]; then
618 # note, this will need to be changed when the mail/contacts host changes
619 sgo openvpn-client@
mail
620 /a
/bin
/distro-setup
/radicale-setup
623 ## android studio setup
624 # this contains the setting for android sdk to point to
625 # /a/opt/androidsdk, which is asked upon first run
626 lnf
/a
/opt
/.AndroidStudio2.2 ~
627 # android site says it needs a bunch of packages for ubuntu,
628 # but I googled for debian, and someone says you just need lib32stdc++6 plus the
630 # https://pid7007blog.blogspot.com/2015/07/installing-android-studio-in-debian-8.html
631 # see w.org for more android studio details
632 spa lib32stdc
++6 default-jdk
635 if [[ $HOSTNAME == treetowl
]]; then
636 ############# begin syncthing setup ###########
638 # It\'s simpler to just worry about running it in one place for now.
639 # I assume it would work to clone it\'s config to another non-phone
640 # and just run it in one place instead of the normal having a
641 # separate config. I lean toward using the same config, since btrfs
642 # syncs between comps.
644 arch
) pi syncthing
;;
646 # testing has relatively up to date packages
647 if ! isdebian-testing
; then
648 # based on error when doing apt-get update:
649 # E: The method driver /usr/lib/apt/methods/https could not be found.
650 pi apt-transport-https
651 # google led me here:
652 # https://apt.syncthing.net/
653 curl
-s https
://syncthing.net
/release-key.txt | sudo apt-key add
-
654 s
="deb http://apt.syncthing.net/ syncthing release"
655 if [[ $
(cat /etc
/apt
/sources.list.d
/syncthing.list
) != $s ]]; then
656 echo "$s" | s
dd of
=/etc
/apt
/sources.list.d
/syncthing.list
663 lnf
-T /w
/syncthing
/home
/ian
/.config
/syncthing
664 sgo syncthing@ian
# runs as ian
666 # these things persist in ~/.config/syncthing, which I save in
667 # /w/syncthing (not in /p, because syncthing should continue to
668 # run on home server even when using laptop as primary device)
669 # open http://localhost:8384/
670 # change listen address from default to tcp://:22001,
671 # this is because we do port forward so it doesn\'t have to use
672 # some external server, but the syncthing is broken for port forward,
673 # you get a message, something "like connected to myself, this should not happen"
674 # when connecting to other local devices, so I bump the port up by 1,
676 # https://forum.syncthing.net/t/connected-to-myself-should-not-happen/1763/19.
677 # Without this, it was being stuck syncing at 0%.
678 # Set gui username and password.
680 # install syncthing via f-droid,
681 # folder setting, turn off master folder (makes it read only).
682 # on phone, add device, click bar code icon
683 # on dekstop, top right, actions, device id
684 # after adding, notification will appear on desktop to confirm
686 # syncing folder. from phone to desktop: select desktop in the
687 # folder on phone\'s sync options, notification will appear in
688 # desktop\'s web ui within a minute. For the reverse, the
689 # notification will appear in android\'s notifications, you have to
690 # swipe down and tap it to add the folder. It won\'t appear in the
691 # syncthing ui, which would be intuitive, but don\'t wait for it
694 # On phone, set settings to run syncthing all the time, and
695 # show no notification.
697 # Folder versioning would make sense if I didn\'t already use btrfs
698 # for backups. I would choose staggered, or trash can for more space.
700 # if needed to install on a remote comp:
701 # ssh -L 8384:localhost:8384 -N frodo
702 # open http://localhost:8384/
704 # Note, the other thing i did was port forward port 22000,
705 # per https://docs.syncthing.net/users/firewall.html
707 ############# end syncthing setup ###########
712 # no equivalent in other distros:
715 # for gui bug reporting
721 ####### misc packages ###########
723 if [[ $HOSTNAME == treetowl
]]; then
726 # note i had to do this, which is persistent:
728 # s chgrp debian-transmission torrents partial-torrents
730 # syslog says things like
731 # 'Failed to set receive buffer: requested 4194304, got 425984'
732 # google suggets giving it even more than that
733 tu
/etc
/sysctl.conf
<<'EOF'
734 net.core.rmem_max = 67108864
735 net.core.wmem_max = 16777216
739 # some reason it doesn\'t seem to start automatically anyways
740 pi-nostart transmission-daemon
742 # the folder was moved here after an install around 02/2017.
743 # it contains runtime data,
744 # plus a simple symlink to the config file which it\'s
745 # not worth separating out.
746 s lnf
-T /i
/transmission-daemon
/var
/lib
/transmission-daemon
/.config
/transmission-daemon
748 # config file documented here, and it\'s the same config
749 # for daemon vs client, so it\'s documented in the gui.
750 # https://trac.transmissionbt.com/wiki/EditConfigFiles#Options
752 # I originaly setup rpc-whitelist, but after using
753 # routing to a network namespace, it doesn\'t see the
754 # real source address, so it\'s disabled.
756 # Changed the cache-size to 256 mb, reduces disk use.
757 # It is a read & write cache.
761 p = '/etc/transmission-daemon/settings.json'
762 File.write(p, JSON.pretty_generate(JSON.parse(File.read(p)).merge({
763 'rpc-whitelist-enabled' => false,
764 'rpc-authentication-required' => false,
765 'incomplete-dir' => '/i/k/partial-torrents',
766 'incomplete-dir-enabled' => true,
767 'download-dir' => '/i/k/torrents',
768 "speed-limit-up" => 800,
769 "speed-limit-up-enabled" => true,
770 "peer-port" => 61486,
771 "cache-size-mb" => 256,
772 "ratio-limit" => 5.0,
773 "ratio-limit-enabled" => true,
777 # make sure its not enabled, not sure if this is needed
778 ser disable transmission-daemon
779 sgo transmission-daemon-nn
781 # todo: others unknown
785 # adapted from /var/lib/dpkg/info/transmission-daemon.postinst
786 if ! getent passwd debian-transmission
> /dev
/null
; then
792 --home-dir /var
/lib
/transmission-daemon \
801 --disabled-password \
802 --home /var
/lib
/transmission-daemon \
808 # dunno why it\'s there, but get rid of it
810 li|lj
) s
rm -rf /home
/linode
;;
813 # arch had a default config,
814 # debian had nothing until you start it.
815 # With a little trial an error, here is a minimal config
816 # taken from the generated one, plus changes that the
817 # settings ui does, without a bunch of ui crap settings.
819 # only settings I set were
825 # the password is randomly generated on first run
826 rpc_pass
=$
(s ruby
<<'EOF'
828 p = '/etc/transmission-daemon/settings.json'
829 puts JSON.parse(File.read(p))["rpc-password"]
834 d
=$f/.config
/transmission-remote-gtk
837 s
-u $u dd of
=$d/config.json
<<EOF
841 "profile-name" : "Default",
842 "hostname" : "transmission",
843 "rpc-url-path" : "/transmission/rpc",
845 "password" : "$rpc_pass",
846 "auto-connect" : true,
850 "update-active-only" : false,
851 "activeonly-fullsync-enabled" : false,
852 "activeonly-fullsync-every" : 2,
853 "update-interval" : 3,
854 "min-update-interval" : 3,
855 "session-update-interval" : 60,
863 "add-options-dialog" : false
875 wget
-nv -N https
://dl.google.com
/linux
/direct
/google-chrome-stable_current_amd64.deb
878 s dpkg
-i google-chrome-stable_current_amd64.deb |
& tee $log
884 # previously I had a more specific search, but dpkg
885 # changed it\'s output as of 7/2016
886 if grep 'dependency problems' \
887 $log &>/dev
/null
; then
888 s apt-get
-fy install
905 pi cups ghostscript gsfonts
# from arch wiki cups page
906 pi hplip
# from google
907 s gpasswd
-a $USER sys
# from arch wiki
908 sgo org.cups.cupsd.service
909 # goto http://127.0.0.1:631
910 # administration tab, add new printer button.
911 # In debian, I could use hte recommended driver,
912 # in arch, I had to pick out the 6L driver.
917 # other distros unknown
922 ubuntu|debian
) pi
--no-install-recommends mairix notmuch
;;
923 fedora|arch
) spa mairix notmuch
;;
926 arch
) spa nfs-utils
;;
927 ubuntu|debian
) spa nfs-client
;;
930 ubuntu|debian
) spa par2
;;
931 arch|fedora
) spa par2cmdline
;;
934 # needed for my tex resume
936 ubuntu|debian
) spa texlive-full
;;
937 arch
) spa texlive-most
;;
943 # flash, unrar, codecs, ms fonts.
944 # This has a manual prompt.
945 spa ubuntu-restricted-extras
949 # rpm fusion recommended codecs
950 s su
-c "yum localinstall -y --nogpgcheck http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-$(rpm -E %fedora).noarch.rpm"
951 pi gstreamer-plugins-ugly gstreamer-plugins-bad gstreamer-ffmpeg\
952 xine-lib-extras-freeworld
957 # optional dep for firefox for h.264 video
958 arch
) spa gst-libav
;;
959 # other distros, probably come by default
963 fedora|ubuntu|debian
) spa gnupg-agent
;;
969 fedora
) spa pinentry-gtk
;;
970 *) : ;; # comes default or with other packages
974 arch
) spa firefox pulseaudio
;;
975 *) : ;; # comes default or with other packages
980 arch
) spa ttf-dejavu
;;
981 debian|ubuntu
) spa fonts-dejavu
;;
988 debian|ubuntu
) spa x11-utils
;;
993 arch
) pi virt-install
;;&
994 debian|ubuntu
) pi virtinst
;;&
995 *) pi virt-manager
;; # creates the libvirt group in debian at least
998 # allow user to run vms, from debian handbook
999 for x
in ian traci
; do s usermod
-a -G libvirt
,kvm
$x; done
1000 # bridge networking as user fails. google lead here, but it doesn\'t work:
1001 # oh well, I give up.
1002 # http://wiki.qemu.org/Features-Done/HelperNetworking
1004 # f=/etc/qemu/bridge.conf
1005 # s dd of=$f <<'EOF'
1008 # #s chown root:qemu $f # debian has somethig like qemu-libvirt. equivalent?
1014 debian|ubuntu
) spa genisoimage
;;
1019 arch
) spa spice-gtk3
;;
1020 debian|ubuntu
) spa spice-client-gtk
;;
1024 # general known for debian/ubuntu, not for fedora
1029 # a bit of googling, and added settings to bashrc
1030 go get
-u github.com
/mvdan
/fdroidcl
/cmd
/fdroidcl
1038 # cdrkit for cloud-init isos
1039 # dnsmasq & ebtables for nat networking in libvirt
1040 # qemu for qemu-img, bind-tools for dig
1041 # dmidecode just because syslog complains
1042 pi
unzip xorg-xmodmap dmidecode ebtables\
1043 bridge-utils dnsmasq qemu bind-tools
1044 # otherwise we get error about accessing kvm module.
1045 # seems like there might be a better way, but google was a bit vague.
1046 s
$sed -ri '/^ *user *=/d' /etc
/libvirt
/qemu.conf
1047 echo 'user = "root"' | s
tee -a /etc
/libvirt
/qemu.conf
1048 # https://bbs.archlinux.org/viewtopic.php?id=206206
1049 # # this should prolly go in the wiki
1051 # guessing this is not needed
1052 #sgo virtlogd.service
1059 arch
) pi virtviewer
;;
1060 *) : ;; # other distros have it as a dependency afaik.
1066 fedora
) cabal
install shellcheck
;;
1067 *) spa shellcheck
;;
1068 # unknown for older ubuntu
1073 arch|debian|ubuntu
) spa pumpa
;;
1074 # others unknown. do have a buildscript:
1075 # /a/bin/buildscripts/pumpa ;;
1080 debian|ubuntu
) spa android-tools-adbd
/unstable
;;
1081 arch
) spa android-tools
;;
1082 # other distros unknown
1085 if [[ $HOSTNAME == treetowl
]]; then
1088 if [[ `debian-archive` == testing
]]; then
1089 # has no unstable dependencies
1090 pi bitcoind
/unstable
1091 src
=/a
/opt
/bitcoin
/contrib
/init
/bitcoind.service
1092 s
cp $src /etc
/systemd
/system
1093 p
=/etc
/bitcoin
/bitcoin
1094 dst
=/etc
/systemd
/system
/bitcoinjm.service
1096 $sed -r "/^\s*ExecStart/s,${p}.conf,${p}jm.conf," $src \
1097 >/etc
/systemd
/system
/bitcoinjm.service
1099 d
=jm
; jm
=d
# being clever for succinctness
1101 s
$sed -ri "/^\s*\[Unit\]/a Conflicts=bitcoin${!s}.service" \
1102 /etc
/systemd
/system
/bitcoin
${s}.service
1109 s chown
-R bitcoin
:bitcoin
$dir
1112 s chown
-R root
:bitcoin
$dir
1115 # pruning decreases the bitcoin dir to 2 gb, keeps
1116 # just the recent blocks. can\'t do a few things like
1117 # import a wallet dump.
1118 # pruning works, but people had to do
1119 # some manual stuff in joinmarket. I dun need the
1120 # disk space, so not bothering yet, maybe in a year or so.
1121 # https://github.com/JoinMarket-Org/joinmarket/issues/431
1122 #https://bitcoin.org/en/release/v0.12.0#wallet-pruning
1128 rpcpassword=$(openssl rand -base64 32)
1129 rpcuser=$(openssl rand -base64 32)
1133 f2
=$dir/bitcoinjm.conf
1135 s
tee -a $f2 >/dev
/null
<<EOF
1137 walletnotify=curl -sI --connect-timeout 1 http://localhost:62602/walletnotify?%s
1138 alertnotify=curl -sI --connect-timeout 1 http://localhost:62602/alertnotify?%s
1139 wallet=joinmarket.dat
1141 # dunno about sharing a wallet between multiple instances
1142 # manually did, wallet.dat symlinked in /nocow/.bitcoin
1146 # other distros unknown
1148 pi libsodium-dev python-pip
1149 cd /a
/opt
/joinmarket
1150 # using develop branch, as it seems to be mostly bug fixes,
1151 # and this is quite new software.
1152 # note: python3 does not work.
1153 # has seg fault error due to some bug, but it still works
1154 pip
install -r requirements.txt ||
[[ $?
== 139 ]]
1155 # note, the target must exist ahead of time, or bitcoin
1156 # just overwrites the link, and it\'s not happy with an empty file,
1157 # so we have to create the wallet, then move and link it.
1158 s lnf
-T /q
/bitcoin
/wallet.dat
/nocow
/.bitcoin
/wallet.dat
1159 s lnf
-T /q
/bitcoin
/joinmarket.dat
/nocow
/.bitcoin
/joinmarket.dat
1160 # not technically needed, but seems cleaner not to have
1161 # symlinks be root owned unlike everything else
1162 s chown
-h bitcoin
:bitcoin
/nocow
/.bitcoin
/*
1164 for var
in rpcuser rpcpassword
; do
1165 u
="$(s sed -rn "s
/^
$var=(.
*)/\
1/p
" /etc/bitcoin/bitcoin.conf)"
1166 # escape backslashes
1167 u
="${u//\\/\\\\\\\\}"
1170 sed -ri "s,^(rpc_${var#rpc}\s*=).*,\1 $u," joinmarket.cfg
1172 sed -ri "s/^\s*(blockchain_source\s*=).*/\1 bitcoin-rpc/" joinmarket.cfg
1181 wget http
://tamacom.com
/global
/global-6.3
.2.
tar.gz
1184 # based on https://github.com/leoliu/ggtags
1185 .
/configure
--with-exuberant-ctags=/usr
/bin
/ctags
1188 s pip
install pygments
1204 pi task-cinnamon-desktop
1205 # in settings, change scrolling to two-finger,
1206 # because the default edge scroll doesn\'t work.
1215 # already in debian jessie
1221 # note this failed running at the beginning of this file,
1222 # because no systemd user instance was running.
1223 # Doing systemd --user resulted in
1224 # Trying to run as user instance, but $XDG_RUNTIME_DIR is not set
1226 if isdebian-testing
; then
1227 # as of 7/2016, has no unstable deps, and is not in testing anymore.
1234 # # ubuntu unknown. probably the same as debian, just check if the
1235 # # init scripts come with the package.
1237 # # copied from arch, but moved to etc
1238 # s dd of=/etc/systemd/user/synergys.service <<'EOF'
1240 # Description=Synergy Server Daemon
1241 # After=network.target
1245 # ExecStart=/usr/bin/synergys --no-daemon --config /etc/synergy.conf
1246 # Restart=on-failure
1249 # WantedBy=multi-user.target
1251 # s dd of=/etc/systemd/user/synergys.socket <<'EOF'
1253 # Conflicts=synergys@.service
1256 # ListenStream=24800
1260 # WantedBy=sockets.target
1262 # # had this fail with 'Failed to connect to bus: No such file or directory'
1263 # # then when I tried it manually, it worked fine...
1264 # if ! systemctl --user daemon-reload; then
1266 # echo retrying systemd user daemon reload
1267 # systemctl --user daemon-reload
1271 # # taken from arch wiki.
1272 # s dd of=/etc/systemd/system/synergyc@.service <<'EOF'
1274 # Description=Synergy Client
1275 # After=network.target
1279 # ExecStart=/usr/bin/synergyc --no-daemon frodo
1280 # Restart=on-failure
1281 # # per man systemd.unit, StartLimitInterval, by default we
1282 # # restart more than 5 times in 10 seconds.
1283 # # And this param defaults too 200 miliseconds.
1287 # WantedBy=multi-user.target
1289 # s systemctl daemon-reload
1292 # ser enable synergyc@ian
1293 # ser start synergyc@ian ||: # X might not be running yet
1296 # systemctl --user start synergys ||:
1297 # systemctl --user enable synergys
1304 ######### end misc packages #########
1307 # packages I once used before and liked, but don\'t want installed now for
1309 # python-sqlite is used for offlineimap
1310 # lxappearance python-sqlite dolphin paman dconf-editor
1316 # todo, finish configuring smart.
1319 # mostly from https://wiki.archlinux.org/index.php/S.M.A.R.T.
1320 # turn on smart. background on options:
1321 # first line, -a = test everyting on all devices.
1322 # -S on, turn on disk internal saving of vendor specific info,
1323 # from google, seems like this is usually already on and fairly standard.
1324 # -o on, turn on 4 hour period non-performance degrading testing.
1325 # short test daily 2-3am, extended tests Saturdays between 3-4am:
1326 sched
="-s (S/../.././02|L/../../6/03)"
1327 s
sed -i --follow-symlinks "s#^[[:space:]]*DEVICESCAN.*#\
1328 DEVICESCAN -a -o on -S on -n standby,q $sched \
1329 -m ian@iankelling.org -M exec /usr/local/bin/smart-notify#" /etc
/smartd.conf
1331 # in the default configuration of at least ubuntu 14.04, resolvconf is
1332 # configured to order any nameservers associated with tun* or tap*
1333 # before the normal internet interfaces, which means they are always
1334 # consulted first. This is often slower and undesirable, ie. local dns
1335 # queries go from 0ms to 10+ or 100+ ms. To reverse the ordering, you
1337 #sudo sed -i --follow-symlinks '/tun\*\|tap\*/d' /etc/resolvconf/interface-order
1338 # however, this breaks dns lookup for hosts on the openvpn lan.
1339 # I can\'t figure out why hosts on the normal lan would not be
1340 # broken under the default ordering, except the host I was
1341 # testing with previously had an entry in /etc/hosts.
1343 ############# end unfinished
1345 ########### misc stuff
1348 for dev
in $
(s btrfs
fi show
/boot |
sed -nr 's#.*path\s+(\S+)$#\1#p'); do
1349 devs
+=($
(devbyid
$dev),)
1351 devs
[-1]=${devs[-1]%,} # jonied by commas
1353 # on grub upgrade, we get prompts unless we do this
1354 s debconf-set-selections
<<EOF
1355 grub-pc grub-pc/install_devices multiselect ${devs[*]}
1359 # the wiki backup script from ofswiki.org uses generic paths
1360 s lnf
/p
/c
/machine_specific
/li
/mw_vars
/root
1361 s lnf
/k
/backup
/wiki_backup
/root
1363 s cedit
/etc
/goaccess.conf
<<'EOF' || [[ $? == 1 ]]
1364 # all things found from looking around the default config
1365 # copied existing NCSA Combined Log Format with Virtual Host, plus %L
1366 log-format %^:%^ %h %^[%d:%t %^] "%r" %s %b "%R" "%u" %D
1367 time-format %H:%M:%S
1368 date-format %d/%b/%Y
1369 log-file /var/log/apache2/access.log
1372 # tip: copy access.log files to a stretch host directory, then run
1373 # jessie's goaccess is too old for some options, and it\'s
1374 # not easily installed from a testing.
1375 # goaccess --ignore-crawlers -f <(cat *) -a -o html > x.html
1381 case `debian-archive` in
1383 s
dd of
=/etc
/apt
/preferences.d
/unison-gtk
<<'EOF'
1384 Explanation: Allow unison-gtk to be upgraded
1386 Pin: release a=testing
1389 # dont think using testing is needed since I figured out how to
1390 # deal with mismatching unison compilers, but I dont
1391 # see any reason to revert it, since it only installs
1392 # a single package which is primarily a single binary
1396 pi unison-gtk
/testing
# after to make it the default unison
1405 # default is alsa, doesn\'t work with with pianobar
1406 s
dd of
=/etc
/libao.conf
<<'EOF'
1407 default_driver=pulse
1412 # note, for jessie, it depends on a higher version of btrfs-tools.
1414 # # disabled due to my patch being in btrbk
1416 # arch|debian|ubuntu) pi btrbk ;;
1421 spa pv
# for progress bar when running interactively.
1422 if [[ $HOSTNAME == treetowl
]]; then
1423 # backup/sync manually on others hosts for now.
1425 # note: to see when it was last run,
1429 if [[ $HOSTNAME == treetowl
]] && [[ `debian-archive` != testing
]]; then
1430 # fail2 ban is broken, with a workaround, per
1431 # https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=770171
1432 # ill wait a while to see if it gets fixed
1442 debian|ubuntu
) s gpasswd
-a ian adm
;; #needed for reading logs
1448 # https://www.torproject.org/docs/rpms.html.en
1449 # https://www.torproject.org/docs/debian.html.en
1450 # todo: figure out if the running service needs to be restarted upon updates
1453 # todo on fedora: setup non-dev packages
1455 s
dd of
=/etc
/yum.repos.d
/torproject.repo
<<'EOF'
1457 name=Tor experimental repo
1459 baseurl=http://deb.torproject.org/torproject.org/rpm/tor-testing/fc/20/$basearch/
1461 gpgkey=http://deb.torproject.org/torproject.org/rpm/RPM-GPG-KEY-torproject.org.asc
1464 name=Tor experimental source repo
1467 baseurl=http://deb.torproject.org/torproject.org/rpm/tor-testing/fc/20/SRPMS
1469 gpgkey=http://deb.torproject.org/torproject.org/rpm/RPM-GPG-KEY-torproject.org.asc
1472 # to be secure, take a look at the fingerprint reported from the following install, and see if it matches from the link above:
1473 # 3B9E EEB9 7B1E 827B CF0A 0D96 8AF5 653C 5AC0 01F1
1475 /a
/bin
/buildscripts
/tor-browser
1478 tu
/etc
/apt
/sources.list
"deb http://deb.torproject.org/torproject.org $(debian-codename) main"
1479 gpg
--keyserver keys.gnupg.net
--recv 886DDD89
1480 gpg
--export A3C4F0F979CAA22CDBA8F512EE8CBC9E886DDD89 | sudo apt-key add
-
1482 pi deb.torproject.org-keyring
1484 /a
/bin
/buildscripts
/tor-browser
1488 /a
/bin
/buildscripts
/tor-browser
1491 pi tor tor-browser-en
1501 fedora todo: disable the firewall or find a way to automate it.
1502 there's an unused section in t.org for tramikssion firewall setup
1504 fedora manual config for nfs:
1506 change to permanent configuration
1507 check the box for nfs
1508 was hard to figure this out, not sure if this is all needed, but
1510 mountd: udp/tcp 20048
1511 portmapper, in firewall-config its called rpc-bind: udp/tcp 111
1512 troubleshooting, unblock things in rpcinfo -p
1513 make sure to reload the firewall to load the persistent configuration
1524 pi nfs-utils || pending_reboot
=true
1526 # this failed until I rebooted
1531 if [[ $HOSTNAME == treetowl
]]; then
1532 # nohide = export filesystems mounted deeper than the export point
1533 # fsid=0 makes this export the "root" export
1534 # not documented in the man page, but this means
1535 # 1. it can be mounted with a shorthand of server:/
1536 # 2. exports that are subdirectories of this one will automatically be mounted
1537 tu
/etc
/exports
<<'EOF'
1538 /k 192.168.1.0/24(rw,fsid=0,nohide,no_root_squash,async,no_subtree_check,insecure)
1547 # persistent virtual machines
1555 # distro may not know about win 10 yet.
1557 if ! virt-install
--os-variant list
&>/dev
/null
; then # we are using a newer virt-install
1558 for v
in 10 8.1 8; do
1559 if osinfo-query os | gr
"^\s*win${v/./\\.}\s" &>/dev
/null
; then
1566 if ! s virsh list
--all --name |
grep -xF win10
&>/dev
/null
; then
1568 # created account with
1569 # win10vmian@outlook.com, and easy to remember password
1570 # win 10 virtio, makes disk way way way faster
1571 # wget https://fedorapeople.org/groups/virt/virtio-win/direct-downloads/latest-virtio/virtio-win.iso
1572 # https://wiki.archlinux.org/index.php/QEMU#Change_Existing_Windows_VM_to_use_virtio
1573 # for installing virtio after initial install instead of with initial iso:
1574 # qemu-img create -f qcow2 fake.qcow2 1G
1575 # --disk=/a/images/virtio-win.iso,device=cdrom \
1576 # --disk=/a/images/fake.qcow2,bus=virtio
1578 # went to device manager, saw 2 pci devices with yellow !,
1579 # did search for drivers, pick cdrom location, done.
1581 # from http://www.tenforums.com/tutorials/4189-fast-startup-turn-off-windows-10-a.html.
1582 # google said there was a control panel option for it, but
1583 # that turned out to be a lie.
1584 # Put this in a .bat file and run as administrator to turn off
1585 # hyberboot which fucks things up.
1586 # REG ADD "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Power" /V HiberbootEnabled /T REG_dWORD /D 0 /F
1587 # power settings, turn off display: never
1588 # run "control userpasswords2", turn on automatic login.
1589 # note: when changing devices, I just undefine, the create the vm again.
1591 if [[ -e /nocow
/user
/vms
/win10.qcow2
]]; then
1592 s virt-install
--noautoconsole --graphics spice
,listen
=0.0.0.0 \
1593 --disk=/a
/images
/win10.qcow2
,bus
=virtio
--vcpus 2 -r 4096 -w bridge
=br0 \
1594 -n win10
--import --os-variant $variant --cpu host-model-only
1596 s virsh destroy win10
1599 if [[ -e /nocow
/user
/vms
/win7.qcow2
]]; then
1600 # this one hasn\'t had the virtio fix done yet.
1601 s virt-install
--noautoconsole --graphics spice
,listen
=0.0.0.0 \
1602 --disk=/a
/images
/win7.qcow2
--vcpus 2 -r 4096 -w bridge
=br0 \
1603 -n win7
--import --os-variant win7
--cpu host-model-only
1604 s virsh destroy win7
1605 # had a problem with --cpu host, so trying out
1606 # --cpu host-model-only
1611 if [[ $HOSTNAME == treetowl
]]; then
1613 # note samba re-reads it\'s config every 1 minute
1615 arch
) s
cp /etc
/samba
/smb.conf.default
/etc
/samba
/smb.conf
;;
1618 # add 2 lines after workgroup option
1619 s
sed -ri --follow-symlinks '/^\s*encrypt passwords\s*=/d' /etc
/samba
/smb.conf
1620 s
sed -ri --follow-symlinks '/^\s*map to guest\s*=/d' /etc
/samba
/smb.conf
1621 s
sed -i --follow-symlinks 's/\(\s*workgroup\s*=\).*/\1 WORKGROUP\n\tencrypt passwords = yes\n\tmap to guest = bad password/' /etc
/samba
/smb.conf
1622 # remove default homes section. not sharing that.
1623 s
sed -ri --follow-symlinks '/^\s*\[homes\]/,/\s*\[/d' /etc
/samba
/smb.conf
1625 if ! grep -xF '[public]' /etc
/samba
/smb.conf
&>/dev
/null
; then
1626 s
tee -a /etc
/samba
/smb.conf
<<'EOF'
1636 # systemd claims it generates units from /etc/init.d, but it
1637 # clearly doesn\'t in debian. I have no idea how they are
1638 # related. fuck debian right now. It\'s not documented. samba
1639 # has a systemd init file linked to /dev/null. There\'s this
1640 # https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=769714 which
1641 # claims samba\'s sub-services will be started automatically by
1642 # systemd... it didn\'t on install, wonder if it will on
1643 # boot. It clued me in how to start it manually though. Nothing
1644 # in /usr/share/doc/samba, debian admin guide says nothing about
1645 # any of this. (this is in debian testing as of 4/2016).
1647 s
/etc
/init.d
/samba start
1655 tu
/etc
/hosts
<<< "127.0.1.1 $(hostname).lan $(hostname)"
1658 ######### begin stuff belonging at the end ##########
1661 # Apps we want to override others for default file handler:
1662 # simplest way in debian is to just install them last.
1675 pi
"${simple_packages[@]}"
1678 if $pending_reboot; then
1679 echo "$0: pending reboot and then finished. doing it now."
1682 echo "$0: $(date): ending now)"