3 # Configure & run btrbk & related work on Ian's computers.
4 # Copyright (C) 2024 Ian Kelling
6 # This program is free software: you can redistribute it and/or modify
7 # it under the terms of the GNU General Public License as published by
8 # the Free Software Foundation, either version 3 of the License, or
9 # (at your option) any later version.
11 # This program is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY; without even the implied warranty of
13 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 # GNU General Public License for more details.
16 # You should have received a copy of the GNU General Public License
17 # along with this program. If not, see <http://www.gnu.org/licenses/>.
19 # SPDX-License-Identifier: GPL-3.0-or-later
22 # todo: if we cancel in the middle of a btrfs send, then run again
23 # immediately, the received subvolume doesn't get a Received UUID:
24 # field, and we won't mount it. Need to figure out a solution that will
28 [[ $EUID == 0 ]] ||
exec sudo
-E "${BASH_SOURCE[0]}" "$@"
30 set -e; .
/usr
/local
/lib
/bash-bear
; set +e
35 btrbk-run [OPTIONS] [run|resume|archive]
36 usually -t TARGET_HOST or -s SOURCE_HOST
38 Note, at source location, intentionally not executable, run and read
42 echo "top of script file:"
43 sed -n '1,/^[# ]*end command line/{p;b};q' "$0"
50 script_name
="${BASH_SOURCE[0]}"
51 script_name
="${script_name##*/}"
53 if $dry_run ||
$conf_only; then
54 printf "$pre dry-run: %s\n" "$*"
56 printf "$pre running: %s\n" "$*"
60 m
() { if $verbose; then printf "$pre %s\n" "$*"; fi; "$@"; }
61 e
() { printf "$pre %s\n" "$*"; }
62 die
() { printf "$pre error: %s\n" "$*" >&2; echo "$pre exiting with status 1" >&2; exit 1; }
63 mexit
() { echo "$pre exiting with status $1"; exit $1; }
65 uninstalled-file-die
() {
66 die
"uninstalled file $1. run install-my-scripts or rerun with -f"
78 if [[ $
(dig +short @
10.2.0.1 -x 10.2.0.2 2>&1 ||
:) == kd.b8.nz.
]] \
79 && ip n show
10.2.0.1 |
grep .
&>/dev
/null
; then
81 elif ping -q -c1 -w1 hal.office.fsf.org
&>/dev
/null \
82 && ip n show
192.168.0.26 |
grep .
&>/dev
/null
; then
89 exit-if-no-default-targets
() {
90 if ! $force && [[ $HOSTNAME != "$MAIL_HOST" ]]; then
91 echo "MAIL_HOST=$MAIL_HOST, nothing to do"
95 kw|kd|frodo|x2|x3|sy|so
) : ;;
97 die
"error: no default targets for this host, use -t"
104 if ping -q -c1 -w1 x3.office.fsf.org
&>/dev
/null
; then
105 targets
+=(x3.office.fsf.org
)
106 elif ping -q -c1 -w1 $h.b8.nz
&>/dev
/null
; then
107 # in case we took it home
109 elif ping -q -c1 -w1 ${h}w.b8.nz
&>/dev
/null
; then
112 targets
+=(x3wg.b8.nz
)
116 add-wireless-target
() {
122 # c = cabled, w = wireless
123 if ping -q -c1 -w1 ${host}c.b8.nz
&>/dev
/null
; then
124 targets
+=(${host}c.b8.nz
)
125 elif ping -q -c1 -w1 $host.b8.nz
&>/dev
/null
; then
126 targets
+=($host.b8.nz
)
127 elif ping -q -c1 -w1 ${host}w.b8.nz
&>/dev
/null
; then
128 targets
+=(${host}w.b8.nz
)
136 # q has sensitive data i dont want to backup for so long
137 cat >>/etc
/btrbk
$conf_suf.conf
<<EOF
138 snapshot_preserve $q_preserve
139 snapshot_preserve_min 2h
141 target_preserve $q_preserve
142 target_preserve_min 2h
151 if [[ -e /b
/bash_unpublished
/source-state
]]; then
152 source /b
/bash_unpublished
/source-state
155 # note q is owned by root:1000
164 dry_run
=false
# mostly for testing
166 verbose
=true
; verbose_arg
=-v
168 if [[ $INVOCATION_ID ]]; then
169 # INVOCATION_ID means running as a systemd service. we cant show progress in this case,
170 # but if we pass the arg, it will insert mbuffer into the command.
173 progress_arg
="--progress"
175 incremental_strict
=false
178 default_args_file
=/etc
/btrbk-run.conf
179 if [[ -s $default_args_file ]]; then
180 # shellcheck disable=SC2046 # we want word splitting
181 set -- $
(< $default_args_file) "$@"
182 # i havent used this feature yet, so warn about it
183 echo "$0: warning: default btrbk-run options set in $default_args_file (sleeping 5 seconds):"
184 cat $default_args_file
188 once_args_file
=/etc
/btrbk-run-once.conf
189 if mv -f $once_args_file $once_args_file-tmp 2> >(sed '/No such file or directory/d'); then
190 # shellcheck disable=SC2046 # we want word splitting
191 set -- $
(< $once_args_file-tmp) "$@"
192 # i havent used this feature yet, so warn about it
193 echo "$0: btrbk-run options set in $once_args_file:"
194 cat $once_args_file-tmp
195 rm -f $once_args_file-tmp
203 check_installed
=false
205 temp
=$
(getopt
-l check-installed
,fast
,pull-reexec
,help 23cefikl
:m
:npqrs
:t
:vh
"$@") || usage
1
209 # for the rare case we want to run multiple instances at the same time
212 # only creates the config file, does not run btrbk
213 -c) conf_only
=true
;;
217 # quit early, just btrbk, no extra remounting etc.
219 # avoids some default behaviors:
220 # - no skipping hosts where xprintidle haven't been idle recently
221 # - exit if we can't ssh to 1 or more hosts
222 # - still set default hosts despite MAIL_HOST status
224 # skip various checks. when we run twice in a row for
225 # switch mail-host, no need to repeat the same checks again.
227 -i) incremental_strict
=true
;;
228 # note this implies resume and -p because it is just meant to make
229 # other hosts have the same snapshots, not do any expiry or new
231 -k) kd_spread
=true
;;
232 # bytes per second, suffix k m g
233 -l) rate_limit
=$2; shift ;;
234 # Comma separated mountpoints to backup. This has defaults set below.
235 -m) IFS
=, mountpoints
=($2); unset IFS
; shift ;;
237 # preserve existing snapshots and backups
238 -p) preserve_arg
=-p ;;
239 # internal option for rerunning under newer SOURCE_HOST version.
240 --pull-reexec) pull_reexec
=true
;;
242 -q) verbose
=false
; verbose_arg
=; progress_arg
= ;;
243 # source host to receive a backup from
247 if [[ $source == *:* ]]; then
248 bbksource
="[$source]"
252 # target hosts to send to. empty is valid for just doing local
253 # snapshot. we have default hosts we will populate.
254 -t) IFS
=, targets
=($2); unset IFS
; shift ;;
256 -v) verbose
=true
; verbose_arg
=-v ;;
259 *) die
"Internal error!" ;;
268 if ! $force && { $check_installed ||
[[ ! $source ]]; } ; then
274 for f
in ${install_bin_files[@]}; do
275 if ! diff -q /a
/bin
/ds
/$f /usr
/local
/bin
/$f; then
276 uninstalled-file-die
$f
279 if ! diff -q /a
/bin
/bash-bear-trap
/bash-bear
/usr
/local
/lib
/bash-bear
; then
280 uninstalled-file-die err
282 if $check_installed; then
289 if [[ $cmd_arg && $cmd_arg != resume
]]; then
290 die
"dont pass -k without resume or empty run arg"
292 if [[ $HOSTNAME == "$MAIL_HOST" ]]; then
293 die
"something went wrong, -k not meant to be run on MAIL_HOST"
295 if [[ $HOSTNAME != kd
]]; then
296 die
"something went wrong, -k only meant to run on kd"
300 add-wireless-target sy so
303 if [[ ! $cmd_arg ]]; then
308 std_preserve
="36h 14d 8w 24m"
309 q_preserve
="18h 14d 8w"
314 # This works better than the normal archive command. We have to
315 # specify the mount points, but that is what we are used to doing and
316 # we prefer it. Another difference is that archive works recursively
317 # and we don't care about that. Sometimes we may still want to run
318 # btrbk archive, but it doesn't even use the config file, so just
319 # run it directly, eg:
320 # time s btrbk -v archive /mnt/r7/amy/boot/btrbk ssh://bo/mnt/boot2/btrbk
323 std_preserve
="999h 999d 999w 999m"
324 q_preserve
="$std_preserve"
327 *) die
"untested command arg" ;;
330 if (( $# > 1 )); then
331 die
: "only 1 nonoption arg is supported"
334 if [[ -v targets
&& $source ]]; then
335 # note, this doesnt need to be the case, but
336 # we would need to think about it.
337 die
"error: -t and -s are mutually exclusive"
340 ### end options parsing
342 # remove path from earlier version of btrbk
343 rm -f /usr
/sbin
/btrbk
344 # note, this still works as intended if there is no /usr/bin/btrbk
345 if [[ /a
/opt
/btrbk
/btrbk
-nt /usr
/bin
/btrbk
]]; then
346 if [[ -e /b
/distro-functions
/src
/package-manager-abstractions
]]; then
347 .
/b
/distro-functions
/src
/package-manager-abstractions
355 # TODO: i wonder if there should be an option to send to the default
356 # targets, plus any given on the command line.
363 # set default targets
364 if [[ ! -v targets
&& ! $source ]]; then
365 exit-if-no-default-targets
368 if ! $kd_spread && [[ $HOSTNAME != x3
]]; then
371 if [[ $HOSTNAME != kd
]]; then
374 wireless_home_hosts
=(
379 for h
in ${wireless_home_hosts[@]}; do
380 if [[ $HOSTNAME != "$h" ]]; then
386 for h
in x2 x3 kw
; do
387 if [[ $HOSTNAME == "$h" ]]; then
390 if ping -q -c1 -w1 $h.office.fsf.org
&>/dev
/null
; then
391 targets
+=($h.office.fsf.org
)
399 if [[ ${mountpoints[0]} ]]; then
400 for mp
in ${mountpoints[@]}; do
401 if [[ -e /nocow
/btrfs-stale
/$mp ]]; then
402 die
"error: $mp is stale, mount-latest-subvol first"
406 # set default mountpoints
407 if [[ ${targets[0]} == tp
]]; then
413 if [[ $source ]]; then
414 source_state
="$(ssh $source 'cat /a/bin/bash_unpublished/source-state; echo source_host=$HOSTNAME')"
416 # shellcheck disable=SC2154 # assigned in the above eval.
417 if [[ $source_host == "$MAIL_HOST" ]]; then
418 prospective_mps
+=(/o
)
420 if [[ $source_host == "$HOST2" ]]; then
421 prospective_mps
+=(/a
/qr
/qd
/q
)
424 if [[ $HOSTNAME == "$MAIL_HOST" ]]; then
425 prospective_mps
+=(/o
)
427 if [[ $HOSTNAME == "$HOST2" ]]; then
428 prospective_mps
+=(/a
/qr
/qd
/q
)
431 prospective_mps
=(/a
/o
/qr
/qd
/q
)
434 # note: put q last just in case its specific retention options were to
435 # affect other config sections. I havent tested if that is the case.
439 for mp
in ${prospective_mps[@]}; do # default mountpoints to sync
440 if [[ -e /nocow
/btrfs-stale
/$mp ]]; then
441 e
"warning: $mp stale, not adding to default mountpoints"
444 if awk '{print $2}' /etc
/fstab |
grep -xF $mp &>/dev
/null
; then
450 tmp
=$
(( ${#mountpoints[@]} == 0 ))
452 die didnt get mountpoint arg and had no defaults
455 ##### end command line parsing ########
457 #### begin pre-checks #####
459 # todo: this has a timing problem, since btrbk.timer could activate the service after this check.
460 if ! $fast && [[ $source ]]; then
461 if [[ $
(ssh $source ps
--no-headers -o comm 1) == systemd
]]; then
462 status
=$
(ssh $source systemctl is-active btrbk.service
) ||
: # normally returns 3
464 inactive|failed
) : ;;
466 echo "$0: error: btrbk is running on source. exiting out of caution"
472 if ! command -v btrbk
&>/dev
/null
; then
473 die
"error: no btrbk binary found"
476 if ! $pull_reexec && [[ $source ]] && $pulla && ! $force ; then
477 ssh root@
$source btrbk-run
--check-installed ||
exit 1
480 #### end pre-checks #####
484 mkdir
-p /var
/log
/btrbk
485 # The journal doesnt go back to my oldest backups, and I've found myself
486 # wanting older logs. Not going to bother expiring old logs, since it is
487 # fine if they go back years.
488 log_path
=/var
/log
/btrbk
/$
(date +%F_
%T
%:::z
).log
489 echo copying output to
$log_path
490 exec &> >(pee
cat 'ts "%F %T"|dd of='$log_path' status=none')
492 # print some non-default opts
495 if ! $conf_only; then
496 opts_show
+=(conf_only
=true
)
499 opts_show
+=(dry_run
=true
)
501 if [[ $rate_limit != no
]]; then
502 opts_show
+=("rate_limit=$rate_limit")
504 if [[ $cmd_arg != run
]]; then
505 opts_show
+=(cmd_arg
=$cmd_arg)
507 if (( ${#opts_show[@]} >= 1 )); then
509 for opt
in ${opts_show[@]}; do
521 if [[ -v targets
]]; then
522 echo "targets: ${targets[*]}"
525 if [[ $source ]]; then
526 echo "source: $source"
529 echo "mountpoints: ${mountpoints[*]}"
532 # pull_reexec stops us from getting into an infinite loop if there is some
533 # kind of weird problem
535 for m
in "${mountpoints[@]}"; do
536 if [[ $m == /a
]]; then
542 if ! $pull_reexec && [[ $source ]] && $pulla ; then
544 m rsync
-ra $source:/usr
/local
/bin
/{mount-latest-subvol
,check-subvol-stale
} /usr
/local
/bin
545 m rsync
-ra $source:/usr
/local
/lib
/bash-bear
/usr
/local
/lib
546 m scp
$source:/a
/bin
/distro-setup
/btrbk-run
$tmpf
547 if ! diff -q $tmpf ${BASH_SOURCE[0]}; then
548 e
"found different version on host $source. reexecing"
549 install -T $tmpf /usr
/local
/bin
/btrbk-run
550 m
/usr
/local
/bin
/btrbk-run
--pull-reexec "${orig_args[@]}"
555 # todo: check if we have no snapshots yet, because I always want to run
556 # archive instead of run. Likely, I should give an error unless a cli
557 # override is passed. perhaps check-subvol-stale could give the error.
558 # see the error message "no snapshots found" in that file.
560 # if our mountpoints are from stale snapshots,
561 # it doesn't make sense to do a backup.
562 m check-subvol-stale
${mountpoints[@]} || die
"found stale mountpoints in ${mountpoints[*]}"
564 # for an initial run, btrbk requires the dir to exist.
565 mkdir
-p /mnt
/{root
,o
}/btrbk
567 local_zone
=$
(date +%z
)
569 if [[ $source ]]; then
573 if ! zone
=$
(ssh root@
$source date +%z
); then
575 echo "$0: warning: failed to ssh to root@$source"
577 die failed to
ssh to root@
$source
580 if [[ $zone != "$local_zone" ]]; then
581 die
"error: dont confuse yourself with multiple time zones. $h has different timezone than localhost"
588 remote_str_cmd
="mkdir -p /mnt/root/btrbk /mnt/o/btrbk && \
590 df --output=size,pcent / | tail -n1"
592 for h
in ${targets[@]}; do
593 if $fast ||
$conf_only; then
594 # Use some typical values in this case
595 root_size
=$
(( 1024 * 1024 * 2000 )) #2tb
598 elif remote_str
=$
(timeout
-s 9 6 ssh root@
$h "$remote_str_cmd"); then
599 mapfile
-t tmp_array
<<<"$remote_str"
600 zone
="${tmp_array[0]}"
601 IFS
=" " read -r root_size percent_used
<<<"${tmp_array[1]}"
602 percent_used
=${percent_used%%%}
604 tmp
=$
(( ${#tmp_array[@]} != 2 ))
606 die
"error: didnt get 2 lines in test ssh to target $h. investigate"
608 case $percent_used in
609 [0-9]|
[1-9][0-9]) : ;;
611 die
"error: didnt get percent disk use in test ssh to target $h. investigate"
619 # we may be booted into a bootstrap fs or something
620 min_root_kb
=$
(( 1024 * 1024 * 200 )) # 200 gb
621 tmp
=$
(( root_size
< min_root_kb
))
623 e
"warning: $h: root_size=$root_size < 200gb, perhaps it is booted to bootstrap vol. skipping for now"
627 tmp
=$
(( percent_used
>= 98 ))
629 die
"error: filesystem on target $h is $percent_used % full"
632 # on sy, xprintidle is resetting every 12 seconds even when not
633 # idle, i dunno why, instead we are checking if the screen is locked,
634 # which is good enough.
636 # This is a separate ssh because the command can fail and thatis ok.
639 if lock_info
=$
(timeout
-s 9 6 ssh $h DISPLAY
=:0 xscreensaver-command
-time); then
640 if [[ $lock_info != *non-blanked
* ]]; then
647 # Ignore this host. i sometimes use a non-main machine for
648 # testing or web browsing, knowing that everything will be wiped
649 # by the next backup, but I dont want it to happen as Im using
651 e
"warning: $h: seems to be actively in use, skipping for now"
656 if [[ $zone != "$local_zone" ]]; then
657 die
"error: dont confuse yourself with multiple time zones. $h has different timezone than localhost"
660 if [[ ! ${sshable[*]} ]] || { $force && [[ ${sshfail[*]} ]]; }; then
661 die
"see skipped host warning above or sshfail hosts: ${sshfail[*]}"
663 if [[ ${sshfail[*]} ]]; then
665 e
"error: failed to ssh to ${sshfail[*]} but continuing with other hosts"
667 targets
=(${sshable[@]})
672 cat >/etc
/btrbk
$conf_suf.conf
<<EOF
673 ssh_identity /q/root/h
674 #ssh_identity /root/.ssh/home
676 # Just a guess that local7 is a good facility to pick.
677 # It's a bit odd that the transaction log has to be logged to
678 # a file or syslog, while other output is sent to std out.
679 # The man does not mention a way for them to be together, but
680 # I dunno if setting a log level like warn might also output
682 transaction_syslog local7
685 #stream_compress zstd
687 # so we only run one at a time
688 lockfile /var/lock/btrbk$conf_suf.lock
690 # default format of short does not accomidate hourly preservation setting
691 timestamp_format long-iso
693 # only make a snapshot if things have changed
694 snapshot_create onchange
695 # I could make this different from target_preserve,
696 # if one disk had less space.
697 # for now, keeping them equal.
698 snapshot_preserve $std_preserve
699 snapshot_preserve_min 6h
701 # so, total backups = ~58
702 target_preserve $std_preserve
703 target_preserve_min 6h
705 # it seems very likely that not doing this could result in clone source not found
706 # errors, for example when expiry happens differently on different hosts,
707 # also, as btrbk does by default, if a failed send happens, on the next run it
708 # will warn about a stray subvolume, but then create a backup of a newer subvol
709 # and use an older subvol as the parent.
710 incremental_prefs sao:1
712 # if something fails and it's not obvious, try doing
713 # btrbk -l debug -v dryrun
715 rate_limit $rate_limit
718 if $incremental_strict; then
719 cat >>/etc
/btrbk
$conf_suf.conf
<<EOF
726 mp_count
=${#mountpoints[@]}
727 for (( i
=0; i
< mp_count
- 1 ; i
++ )); do
728 if [[ ${mountpoints[i]} == /q
]]; then
729 unset "mountpoints[i]"
738 declare -A source_snaps
740 for m
in ${mountpoints[@]}; do
751 snap_list_cmds
+=("echo $vol/btrbk/$sub.*;")
753 if [[ $source ]]; then
754 tmp_a
=($vol/btrbk
/$sub.
*)
755 tg_snaps
+=("${tmp_a[*]}")
756 cat >>/etc
/btrbk
$conf_suf.conf
<<EOF
757 volume ssh://$bbksource$vol
761 cat >>/etc
/btrbk
$conf_suf.conf
<<EOF
762 target send-receive $vol/btrbk
764 else # we have targets
765 for snap
in "$vol/btrbk/$sub."*; do
766 source_snaps
[$snap]=t
769 cat >>/etc
/btrbk
$conf_suf.conf
<<EOF
774 for tg
in ${targets[@]}; do
776 if [[ $tg == *:* ]]; then
779 cat >>/etc
/btrbk
$conf_suf.conf
<<EOF
780 target send-receive ssh://$tg$vol/btrbk
786 # Delete any subvols on the receiving host that don't exist on the
787 # sending host. Otherwise, the receiving host could have snapshots that
788 # aren't on the sending side, and thus become odd leaf subvols, and then
789 # btrbk could try to use them when we sync back, creating a weird tree
790 # instead of linear parent/child relationship. Maybe this could lead to
791 # a missing source subvol error, so lets avoid it.
793 get-orphan-tg-snaps
() {
795 for (( i
=0; i
< ${#mountpoints[@]}; i
++ )); do
796 orphan_start_count
=${#orphan_tg_snaps[@]}
798 for tg_snap
in ${tg_snaps[$i]}; do
799 tg_snap_count
=$
(( tg_snap_count
+ 1 ))
800 if [[ ! ${source_snaps[$tg_snap]} ]]; then
801 orphan_tg_snaps
+=("$tg_snap")
804 orphan_mp_count
=$
(( ${#orphan_tg_snaps[@]} - orphan_start_count
))
806 tmp
=$
(( tg_snap_count
> 1 && tg_snap_count
== orphan_mp_count
))
808 die
"something went wrong checking orphans on $tg: for mountpoint ${mountpoints[$i]}, $orphan_mp_count"
813 if [[ $source ]]; then
814 for snap
in $
(ssh root@
$source "shopt -s nullglob; ${snap_list_cmds[*]}"); do
815 source_snaps
[$snap]=t
818 tmp
=$
(( ${#orphan_tg_snaps[*]} >= 1 ))
820 d btrfs sub del
${orphan_tg_snaps[*]}
822 else # we have targets
823 for tg
in ${targets[@]}; do
824 tmp_str
=$
(ssh root@
$tg "shopt -s nullglob; ${snap_list_cmds[*]}")
825 mapfile
-t tg_snaps
<<<"$tmp_str"
827 tmp
=$
(( ${#orphan_tg_snaps[*]} >= 1 ))
829 d
ssh root@
$tg "btrfs sub del ${orphan_tg_snaps[*]}"
834 # todo: umount first to ensure we don't have any errors
835 # todo: do some kill fuser stuff to make umount more reliable
845 m btrbk
-c /etc
/btrbk
$conf_suf.conf
-v -n $cmd_arg
848 # -q and just using the syslog option seemed nice,
849 # but it doesn't show when a send has a parent and when it doesn't.
850 m btrbk
-c /etc
/btrbk
$conf_suf.conf
$preserve_arg $verbose_arg $progress_arg $cmd_arg
856 # todo: tp not valid anymore.
857 # if we have it, sync to systems which don't
858 if mountpoint
$rsync_mountpoint >/dev
/null
; then
859 for tg
in ${targets[@]}; do
862 dirs=(/p
/c
/machine_specific
/tp
)
863 for x
in /p
/c
/machine_specific
/*.hosts
; do
864 if grep -qxF $tg $x; then
868 m rsync
-aSAXPH --specials --devices --delete --relative ${dirs[@]} root@
$tg:/
875 for mp
in "${mountpoints[@]}"; do
876 subvols
+=("${mp##*/}")
878 if [[ $source ]]; then
879 m mount-latest-subvol
"${subvols[@]}"
881 for tg
in ${targets[@]}; do
882 m
/a
/exe
/mount-latest-remote
"$tg" "${subvols[@]}" || ret
=$?
886 # todo, we get hostnames earlier, reuse that.
887 if [[ $ret == 0 ]]; then
888 for tg
in ${targets[@]}; do
889 h
=$
(ssh $tg hostname
)
890 if [[ $h == kd
&& $HOSTNAME == x3
&& $HOSTNAME == "$MAIL_HOST" ]]; then
891 m
ssh root@
$tg 'btrbk-spread-wrap &>/dev/null </dev/null &'
893 rsync
--mkpath -a -f"- */" -f"+ *" /var
/log
/btrbk
/ root@
$tg:/var
/log
/btrbk
/$tg
894 cmd
=/usr
/local
/bin
/mail-backup-clean
895 ssh root@
$tg "if test -x $cmd; then $cmd; fi"
897 if [[ $source ]]; then
898 rsync
--mkpath -a -f"- */" -f"+ *" $source:/var
/log
/btrbk
/ /var
/log
/btrbk
/$source
904 # todo: move variable data we don't care about backing up
905 # to /nocow and symlink it.
908 # background on btrbk timezones. with short/long, timestamps use local time.
909 # for long, if your local time moves backwards, by moving timezones or
910 # for an hour when daylight savings changes it, you will temporarily get
911 # a more aggressive retention policy for the overlapping period, and
912 # vice versa for the opposite timezone move. The alternative is using
913 # long-iso, which puts timezone info into the timestamp, which means
914 # that instead of shifting time, you shift the start of day/week/month
915 # which is used for retention to your new local time, which means for
916 # example, if you moved forward by 8 hours, the daily/weekly/monthly
917 # retention will be 8 hours more aggressive since midnight is at a new
918 # time, unless you fake the timzeone using the TZ env variable.
919 # However, in the short term, there will be no inconsistencies.
920 # I don't see any problem with shifting when the day starts for
921 # retention, so I'm using long-iso.
923 # note to create a long-iso timestamp: date +%Y%m%dT%H%M%S%z