-;; Copyright (C) 2019 Ian Kelling
+;; Copyright (C) 2020 Ian Kelling
;; This program is free software: you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; along with this program. If not, see <http://www.gnu.org/licenses/>.
;; do m-x benchmark-init to see some benchmark stats
-;;(add-to-list 'load-path "~/.emacs.d/src/benchmark-init-el/")
+;;(add-to-list 'load-path (concat user-emacs-directory "src/benchmark-init-el/")
;;(require 'benchmark-init-loaddefs)
;;(benchmark-init/activate)
;;; init.el --- the start of customization
-;; (toggle-debug-on-error) ;uncomment to help debug
+;;(toggle-debug-on-error) ;uncomment to help debug
+
;; stop from minimizing & freezing the gui
(add-hook 'after-init-hook
`(lambda ()
(setq file-name-handler-alist file-name-handler-alist-old
- gc-cons-threshold 800000
- gc-cons-percentage 0.1)
- (garbage-collect)) t)
+ ;; 100 mb
+ gc-cons-threshold 100000000))
+ ;; taken from wiegley, dunno why the t is there.
+ t)
+
+;; stuff to allow an alternate location for ~/.emacs.d
+(setq user-emacs-directory (file-name-directory user-init-file))
+(when (getenv "EHOME")
+ (setenv "HOME" (getenv "EHOME")))
;; 2019-6-26, 1.26s
- ;;; to profile init:
- ;;; uncomment the following block
-;; (require 'benchmark-init)
-;; (add-hook 'after-init-hook 'benchmark-init/deactivate)
- ;;; Then run:
- ;;; emacs -f benchmark-init/show-durations-tabulated
- ;;; emacs -f benchmark-init/show-durations-tree
- ;;; to catch things post-init
- ;;; emacs -f benchmark-init/deactivate
+;; ; to profile init:
+;; ; uncomment the following block
+;;(require 'benchmark-init)
+;;(add-hook 'after-init-hook 'benchmark-init/deactivate)
+;; ; Then run:
+;; ; emacs -f benchmark-init/show-durations-tabulated
+;; ; emacs -f benchmark-init/show-durations-tree
+;; ; to catch things post-init
+;; ; emacs -f benchmark-init/deactivate
;; these need to be done before the hook in order to satisfy the byte compiler or batch mode
-;; this is the builtin org mode
-;;(add-to-list 'load-path "~/.emacs.d/emacs/site-lisp/org")
-
-(add-to-list 'load-path "~/.emacs.d/src/readline-complete")
+(add-to-list 'load-path (concat user-emacs-directory "src/readline-complete"))
;; disabled since not used.
-;;(add-to-list 'load-path "~/.emacs.d/src/bbdb-csv-import")
-;;(add-to-list 'load-path "~/.emacs.d/src/ghci-completion")
-;;(add-to-list 'load-path "~/.emacs.d/src/mediawiki-el")
-;;(add-to-list 'load-path "~/.emacs.d/src/spray")
+;;(add-to-list 'load-path (concat user-emacs-directory "src/bbdb-csv-import"))
+;;(add-to-list 'load-path (concat user-emacs-directory "src/spray"))
-(add-to-list 'load-path "~/.emacs.d/src/visible-mark")
+(add-to-list 'load-path (concat user-emacs-directory "src/visible-mark"))
;; from its README.md
(eval-when-compile
(require 'use-package))
-
+(use-package use-package-ensure-system-package
+ :ensure t)
;; Ubiquitous Packages. these could go anywhere actually
-(use-package saveplace
- :unless noninteractive
- :config
- (save-place-mode 1))
+
+;; find file at point
(use-package ffap)
-;; from jwiegley
-(use-package recentf
- :defer 10
- :commands (recentf-mode
- recentf-add-file
- recentf-apply-filename-handlers)
- :config
- (recentf-mode 1))
+
+
(setq package-archives
- (quote
- (("gnu" . "https://elpa.gnu.org/packages/")
- ("MELPA" . "https://melpa.org/packages/"))))
+ (quote
+ (("gnu" . "https://elpa.gnu.org/packages/")
+ ("MELPA" . "https://melpa.org/packages/"))))
;;(add-to-list 'package-archives
;; '("marmalade" .
;; keep our init.el clean, by moving customization elisp to it's own file
-(setq custom-file "~/.emacs.d/custom.el")
-(load custom-file 'noerror)
+(setq custom-file (concat user-emacs-directory "custom.el"))
+;; empty atm
+;;(load custom-file 'noerror)
;;; auto-complete
;; disabled while I look for another alternative
;;(icomplete-mode)
+(unless (string= (daemonp) "server")
+ (setq ac-use-comphist nil))
(require 'auto-complete-config)
(ac-config-default)
;; complete after 1 char instead of default 2
-(setq ac-auto-start 1)
-(setq ac-delay 0.001)
+(setq ac-auto-start 1
+ ac-delay 0.001)
(add-to-list 'ac-modes 'org-mode 'sql-mode)
-(defun ac-common-setup ()
- (add-to-list 'ac-sources 'ac-source-yasnippet))
;; for org mode completion source taken from wiki.
;; it did not work. no idea why. todo, investigate
(list (format "LC_INSIDE_EMACS=%s,comint" emacs-version))
process-environment))
(default-directory
- (if (file-accessible-directory-p default-directory)
- default-directory
- "/"))
+ (if (file-accessible-directory-p default-directory)
+ default-directory
+ "/"))
proc decoding encoding changed)
(let ((exec-path (if (and command (file-name-directory command))
;; If the command has slashes, make sure we
(set-process-coding-system proc decoding encoding))
proc))
-;;; auto save & backup
+;;; auto save
+
+;; todo: patch this so i can turn it off like my-as-off-local.
+;; then try it out and see if it can replace my autosave.
+;; Or maybe with the new auto-save-visited-mode.
+;; (use-package super-save
+;; :ensure t
+;; :config
+;; (setq super-save-exclude '("")
+;; super-save-triggers
+;; '(balance-windows
+;; next-buffer
+;; org-babel-execute-src-block
+;; other-window
+;; previous-buffer
+;; split-window-below
+;; split-window-horizontally
+;; start-process-shell-command
+;; switch-to-buffer
+;; windmove-down
+;; windmove-left
+;; windmove-right
+;; windmove-up)
+;; )
+;; (super-save-mode +1))
+
+
+
(setq auto-save-timeout 1) ; idle time before auto-save.
;; main hook for my auto save
;; avoid window config hook saving too much, it can
;; get into loops in some random situations
-(setq my-auto-save-last nil)
+(defvar my-auto-save-last nil)
+(defvar my-as nil)
+(defvar my-auto-save-last nil)
(defun my-auto-save-win ()
(unless (eq (current-buffer) my-auto-save-last)
(my-auto-save (current-buffer))))
(defun my-as-on-local (&rest ignore)
(interactive)
- (setq-local my-as on))
+ (setq-local my-as t))
;; based on suggestion in the emacs docs, redefine these 2 functions
;; to avoid prompt spamming the user when we do auto-save
;; assume hard linked files are done on purpose, don't screw them up
backup-by-copying-when-linked t)
+(defvar last-backup-time 0)
;; todo, the time needs to be an integer, not a vector type thing
(defun constant-backup ()
"Backup conditioned on some time passing since last one.
Hooked into 'before-save-hook."
(cl-flet ((b-time (minutes)
- (< last-backup-time
- (- (current-time) (* 60 minutes)))))
+ (< last-backup-time
+ ;; current-time is seconds, so convert minutes to seconds.
+ (- (current-time) (* 60 minutes)))))
(when (or (not (boundp 'last-backup-time)) (and (< (buffer-size) 10000000) (b-time 5)) (b-time 30))
(setq buffer-backed-up nil)
(setq-local last-backup-time (current-time)))))
;; but new emacs version fixed all that, yay!.
- ; not using, but here for documentation,
- ; alternate way to enable and specify how long between autosaves.
- ; number of input events between autosave.
- ; lowest bound of functionality is actually about 15 input events
- ;(setq auto-save-interval
-
-;;; bbdb
-;; based on bbdb manual
-;; also has instructions to integrate with gnus,
-
-(bbdb-initialize 'message)
-
-;; recommended by gnus,
-;; but seems like it could be good to have set for other stuff
-(setq user-full-name "Ian Kelling")
-;; general email setting? recommended by mu4e
-(setq message-kill-buffer-on-exit t)
-
-
-
-;; use d instead
-(add-hook 'bbdb-mode-hook
- (lambda () (define-key bbdb-mode-map (kbd "C-k") nil))
- ;; based on emacs24-starter-kit
- (setq bbdb-offer-save 'auto
- bbdb-notice-auto-save-file t
- bbdb-expand-mail-aliases t
- bbdb-canonicalize-redundant-nets-p t
- bbdb-complete-name-allow-cycling t)
- )
-
-;;(require 'bbdb-csv-import)
-
-;;; bookmark settings
- ; save bookmarks whenever they are changed instead of just when emacs quits
-(setq bookmark-save-flag 1)
- ; increase bookmark context size for better functionality
-(setq bookmark-search-size 2000)
-
-;;; c-like settings
-;; change last thing from gnu.
-;; notably this avoids brace indent after if, and 4 space indent
-(setq c-default-style '((java-mode . "java")
- (awk-mode . "awk")
- (other . "stroustrup")))
-;; for emacs itself, use
-;; (setq c-default-style '((java-mode . "java")
-;; (awk-mode . "awk")
-;; (other . "gnu")))
-;; (setq-default c-basic-offset 2)
+;; not using, but here for documentation,
+;; alternate way to enable and specify how long between autosaves.
+;; number of input events between autosave.
+;; lowest bound of functionality is actually about 15 input events
+;; (setq auto-save-interval ...)
;;; color theme
;; themes are available through ELPA.
-;; interesting light themes
-
-
(defun override-theme (arg)
(interactive)
(while custom-enabled-themes
(disable-theme (car custom-enabled-themes)))
(load-theme arg t))
-(setq color-theme-is-global t)
+
+;; not a real var? remove when I see this again
+;;(setq color-theme-is-global t)
;; temporary, make night be default
(defun toggle-night ()
(interactive)
(cond ((equal (car custom-enabled-themes) 'naquadah)
- (override-theme 'leuven))
+ (override-theme 'ef-light))
(t
(override-theme 'naquadah))))
+(setq ef-themes-mixed-fonts t
+ ef-themes-variable-pitch-ui t)
+
;; in the leuven theme file, i made this change. will need to remake it
;; on package updates. I could fork, but its a pretty simple change
;; < `(default ((,class (:foreground "#333333" :background "#FFFFFF"))))
;; > `(default ((,class (:foreground "#333333" :background "#F6F6F0"))))
-(override-theme 'leuven)
+;;
+;; < `(font-lock-comment-face ((,class (:slant italic :foreground "#8D8D84")))) ; #696969
+;; > `(font-lock-comment-face ((,class (:slant italic :foreground "#484848")))) ; #696969
+
+;;(override-theme 'leuven)
+
+;; based on ef-themes README.org
+(mapc #'disable-theme custom-enabled-themes)
+;; the default blue is too dark and messes with erc colors
+(setq ef-light-palette-overrides
+ '((bg-mode-line "#efefef")))
+(ef-themes-select 'ef-light)
+;;(load-theme 'ef-light)
+
+;; for learning about faces, see
+;; useful snippet
+;; (byte-recompile-file "/home/iank/.emacs.d/elpa/leuven-theme-20220203.947/leuven-theme.el" nil 0)
;; disable color thing with this:
;;(disable-theme (car custom-enabled-themes))
;;(override-theme 'wombat) ; cursor not visible enough. from a wombat package, not sure which
;;(override-theme 'misterioso) ; cursor not visible enough
-
-
;;decent light themes
;;(override-theme 'alect-light) ; theres a -alt version, don't see a dif. could use this without dimming. from alect-something package
;;(override-theme 'occidental) ; from occidental-theme package
-
-;;; yasnippet
-
-;; cd ~/.emacs.d/src
-;; git clone --recursive https://github.com/capitaomorte/yasnippet
-;; touch snippets/.yas-make-groups
-
-;; This all makes it so I can look through the default snippets
-;; in the menu bar, but they don't show up elsewhere, because they are
-;; mostly things I don't want.
-
-
-(require 'yasnippet)
-;; this needs to be before yas-global-mode
-(setq yas-snippet-dirs (list "~/.emacs.d/snippets"))
-(yas-global-mode 1)
-
-(setq
- yas-also-auto-indent-first-line t
- yas-choose-tables-first t
- yas-use-menu (quote full)
- ;; this sets ido-prompt as first function
- yas-prompt-functions
- '(yas-ido-prompt yas-dropdown-prompt yas-x-prompt yas-completing-prompt yas-no-prompt))
-
-;; todo, explore this option for wrapping region
-;; '(yas/wrap-around-region t))
-
;;; cross session settings
-;; Save a list of recent files visited.
-(recentf-mode 1)
-(setq recentf-max-saved-items 400
- recentf-max-menu-items 15)
-
-
-(setq save-place t
- save-place-version-control 'nospecial
- save-place-limit 40000
- save-place-file "~/.emacs.d/places")
-
-;; savehist keeps track of some history
-;; search entries
-(setq savehist-additional-variables '(kill-ring search-ring regexp-search-ring)
- ;; save every minute
- savehist-autosave-interval 60
- ;; keep the home clean
- savehist-file "~/.emacs.d/.savehist")
-(savehist-mode 1)
-
-
-;;; ediff
-;; ediff-buffers is the main command to use
-
-;; ediff - don't start another frame for the control panel
-;; unfortunately, this doesn't allow me to use 2 frames for the diff buffers
-;; so disable this temporarily with the next line if you want that
-;; sometime I should setup 2 functions to explicitly do each type
-(setq ediff-window-setup-function 'ediff-setup-windows-plain)
-;;(setq ediff-window-setup-function 'ediff-setup-windows-default)
+(use-package recentf
+ ;; defer & commands from jwiegley
+ :defer 10
+ :if (string= (daemonp) "server")
+ :commands (recentf-mode
+ recentf-add-file
+ recentf-apply-filename-handlers)
+ :config
+ (recentf-mode 1)
+ (setq recentf-max-saved-items 400
+ recentf-max-menu-items 15)
+ )
-;; do side by side diffs
-(setq ediff-split-window-function 'split-window-horizontally)
+(when (string= (daemonp) "server")
+ ;; save it every 5 minutes. https://www.emacswiki.org/emacs/RecentFiles
+ (run-at-time nil (* 5 60) 'recentf-save-list))
+;; less strong conditional: :unless noninteractive
+(use-package saveplace
+ :if (string= (daemonp) "server")
+ :config
+ (setq
+ save-place-version-control 'nospecial
+ save-place-limit 4000
+ save-place-file (concat user-emacs-directory "places"))
+ (save-place-mode 1))
-;; Things I tried which didn't work, which intuitively I think should
-;; work better: I can open the second diff buffer in a new frame, and
-;; close it's window in the first frame after starting ediff, but when I
-;; hit n to go to the next diff, it restores the window in the first
-;; frame. Another thing I tried is to open 2 new frames and set them up
-;; as I want. However, if I try to open the *Ediff Control Panel* buffer
-;; in a different window from its original one, my mouse jumps to one of
-;; the diff frames, or if that isn't visible, the buffer just hangs
-;; until I select the original ediff control panel window. This seems
-;; like a bug to me. I am using a very recent development version of
-;; emacs.
+;; savehist keeps track of some history search entries
+(use-package savehist
+ :if (string= (daemonp) "server")
+ :config
+ (setq savehist-additional-variables '(kill-ring search-ring regexp-search-ring)
+ ;; save every minute
+ savehist-autosave-interval 60
+ ;; keep the home clean
+ savehist-file (concat user-emacs-directory ".savehist"))
+ (savehist-mode 1))
;;; dired
;; dired - reuse current buffer by pressing 'a'
(put 'dired-find-alternate-file 'disabled nil)
-;;; mu4e
-
-;; alsot tried notmuch, it had some glitches, and it's config has a list
-;; of folders which i'd rather not publish, so it's config is archived.
-
-;;(add-to-list 'load-path "/usr/local/share/emacs/site-lisp/mu4e")
-;;(add-to-list 'load-path "/usr/share/emacs/site-lisp/mu4e")
-;; (require 'mu4e)
-
-;; (setq mu4e-headers-results-limit 2000)
-
-
-(defun my-mu4e-init ()
- (setq mu4e-headers-fields (delq (assoc :mailing-list mu4e-headers-fields) mu4e-headers-fields))
- ;; it's implemented in mu4e, but not in the actions list for
- ;; some reason.
- (add-to-list 'mu4e-view-actions
- '("browser view" . mu4e-action-view-in-browser) t)
-
- (add-to-list 'mu4e-headers-actions
- '("from this sender" . mu4e-action-msgs-by-this-sender) t)
- (add-to-list 'mu4e-view-actions
- '("from this sender" . mu4e-action-msgs-by-this-sender) t)
- ;; normally, you would add to this, but we want to
- ;; modify unread messages. the first 4 are defined by default.
- (setq mu4e-bookmarks
- `( ,(make-mu4e-bookmark
- :name "Unread messages"
- ;; old less restrictive unread, for adapting in the future:
- ;; flag:unread AND NOT flag:trashed AND NOT maildir:/Junk AND NOT maildir:/fwfw AND NOT maildir:/log
- :query "flag:unread maildir:/INBOX"
- :key ?u)
- ,(make-mu4e-bookmark
- :name "Today's messages"
- :query "date:today..now"
- :key ?t)
- ,(make-mu4e-bookmark
- :name "Last 7 days"
- :query "date:7d..now"
- :key ?w)
- ,(make-mu4e-bookmark
- :name "Messages with images"
- :query "mime:image/*"
- :key ?p))
- )
- )
-
-(eval-after-load "mu4e" '(my-mu4e-init))
-
-(setq
- ;; https://github.com/djcb/mu/issues/1025
- mail-user-agent 'mu4e-user-agent
- ;; common to gnus. default sendmail-query-once asks us, then sets this via customize.
- send-mail-function (quote sendmail-send-it)
- ;; use the standard imap folders
- mu4e-sent-folder "/Sent"
- mu4e-drafts-folder "/Drafts"
- mu4e-trash-folder "/Trash"
- ;; reindex new mail this often in seconds
- ;; show addresses instead of just names
- mu4e-view-show-addresses t
- mu4e-use-fancy-chars t
- mu4e-confirm-quit nil
- mu4e-headers-leave-behavior 'apply ;; dont ask, do whatever was marked
- ;; default 500.
- mu4e-headers-results-limit 1000
- ;; tell exim to use from: as envelope from.
- ;; exim's default is use outgoing_msg_localpart@hostname.
- mail-specify-envelope-from t
-
- ;; looking up the list of maildirs when doing jo from summary
- ;; can take a few seconds if we have a ton of messages.
- ;; Only take that time for the first lookup.
- ;; if we add a new maildir, just restart mu4e for it to be in that list.
- mu4e-cache-maildir-list t
- ;; default is 8, way too small for my big monitors
- mu4e-headers-visible-lines 50
- message-sendmail-envelope-from 'header
- ;; trying this out
- ;;mu4e-view-use-gnus t
- ;; had problems where mu4e and gnus would hang verifying signatures, gnus man
- ;; said this should help, but it didnt work. they still got verified.
- ;; mm-verify-option 'never
- )
-
-;; fucks up reading unread bookmark. when that is fixed, enable it
-;; (setq mu4e-update-interval 60)
-
-;; this file includes setting up my email addresses, which are not public,
-;; including
-;; mu4e-user-mail-address-list
-;; and a function
-;; inspired by mu4e info manual, search for mu4e-compose-pre-hook.
-(when (file-exists-p "/p/c/mymu4e.el")
- (load "/p/c/mymu4e.el"))
-
-(defun my-decrypt ()
- ;; use for decrypting in mu4e
- (interactive)
- (beginning-of-buffer)
- (when (search-forward "-----BEGIN PGP MESSAGE-----" nil t)
- (read-only-mode 0)
- (let ((start (match-beginning 0))
- (end (search-forward "-----END PGP MESSAGE-----" nil t)))
- (shell-command-on-region start end "gpg2 -dq" nil t shell-command-default-error-buffer t)
- )))
-(add-hook 'mu4e-view-mode-hook 'my-decrypt)
-
-(defun iank-set-from-name (regexes)
- "If we find an address matching regex, then set that address as the to,
-and whatever was used"
- (when mu4e-compose-parent-message
- (let ((found nil))
- (while (and regexes (not found))
- (setq re (car regexes)
- regexes (cdr regexes)
- found (mu4e-message-contact-field-matches
- mu4e-compose-parent-message :to re)))
- (when found
- (setq user-full-name (car found))
- ;; we get an error unless we do this. that is a bug. I could
- ;; send a patch... also a bug: setting message-from-style nil
- ;; doesnt work in mu4e unless user-full-name is also nil.
- (unless user-full-name
- (setq message-from-style nil))
- (setq user-mail-address (cdr found)
- mail-signature nil))
- found)))
-(defun iank-set-from (regexes)
- "If we find an address matching regex, then set that address as the to,
-and Ian Kelling as the name"
- (when mu4e-compose-parent-message
- (let ((found nil))
- (while (and regexes (not found))
- (setq re (car regexes)
- sig (cadr regexes)
- regexes (cddr regexes)
- found (cdr (mu4e-message-contact-field-matches
- mu4e-compose-parent-message :to re))))
- (when found (setq user-mail-address found
- user-full-name "Ian Kelling"))
- found)))
-
-
-(defun mu-exit-wait ()
- (interactive)
- ;; taken from the mu source
- (let* ((buf (get-buffer mu4e~proc-name))
- (proc (and (buffer-live-p buf) (get-buffer-process buf))))
- (mu4e-quit)
- ;; without sleep, we get database locked by another process error when hitting u
- ;; if another mu was running.
- (if proc (sleep-for 0 1000))))
-
-(defun fsf-mu4e ()
- (interactive)
- (my-mu4e-commmon)
- (setq
- user-mail-address "iank@fsf.org"
- iank-user-mail-address user-mail-address
- ;; WARNING: be careful editing this, there needs to be a space after --, and my editor
- ;; and git will automatically remove it unless i manually disable it.
- mail-signature fsf-sig
- ) ;; end setq
- (add-hook 'mu4e-compose-pre-hook 'my-mu4e-to)
- (mu4e))
-
-
-
-
-(defun mu4e-action-msgs-by-this-sender (msg)
- "In header view, view messages by the sender of the message under point."
- (let ((from (mu4e-message-field msg :from)))
- (unless from
- (mu4e-error "No from header for this message"))
- ;; from is structured like: (("Anacron" . "root@x2.lan"))
- (mu4e-headers-search (concat "f:" (cdar from)))))
+;; copied from dired-x info manual
+(with-eval-after-load 'dired
+ (require 'dired-x)
+ ;; use e instead for find file. i would like
+ ;; dired-do-async-shell-command, except it pops open some async
+ ;; shell buffer. i should figure out how to get rid of that.
+ (define-key dired-mode-map "f" 'dired-do-shell-command)
+ ;; Set dired-x global variables here. For example:
+ ;; (setq dired-guess-shell-gnutar "gtar")
+ ;; (setq dired-x-hands-off-my-keys nil)
+ )
+(add-hook 'dired-mode-hook
+ (lambda ()
+ ;; Set dired-x buffer-local variables here. For example:
+ ;; (dired-omit-mode 1)
+ ))
+;; the defaults are just some weird predefined list, like xpdf for pdf.
+(setq dired-guess-shell-alist-user
+ (list
+ (list ".*" "xdg-open")
+ ))
;;; elisp settings
- ; when manually evaluating lisp, go into debugger on error
+;; when manually evaluating lisp, go into debugger on error
(setq eval-expression-debug-on-error t)
- ;reminder of useful var: debug-on-error
-
-
-;;; haskell
-
-;; useful comint-shell mode commands. If not prefaced with *, it means it is not in the haskell custom repl
-;; *todo: setup haskell c-t toggle arrow keys
-;; tab completion
-;; C-q insert prev arg
-;; C-( history search
-;; c-m-left/right move to next/prev prompts
-;; *c-enter, multi-line input
-;; *s-delete, send input across windows. (i can implement this)
-;; *c-m-l clear screen
-;; *haskell-process-interrupt, c-cc terminate job (i can implement this maybe)
-
-;; nice bash/readline functions missing in comint:
-;; yank-nth-arg
-;; operate-get-next
-;; menu-complete
-
-;; usefull comint commands:
-;; c-cl : list historic command in temp buffer
-;; C-c C-o comint-delete-output
-;; comint-restore-input, todo: put this on a randomish c-c key
-
-
-
-;; todo:
-;; checkout haskell repl functions:
-;; c-cv haskell-check, hlint
-;; C-M-q prog-indent-sexp
-;; c-c. haskell-mode-format-imports
-;; C-c M-/ haskell-doc-check-active
-;; haskell-process-generate-tags
-;; haskell-process-cabal-build
-;; haskell-cabal-command.. or something
-;; haskell-process-restart
-;; C-h v haskell-process-log
-;; C-h v haskell-process-show-debug-tips
-
-;; various not immediately useful functions:
-;; haskell-process-add-dependency
-;; haskell-process-touch-buffer
-;; haskell-process-cd
-;; haskell-process-unignore
-;; haskell-process-reload-devel-main
-
-
-;; rebind
-;; home: C-a haskell-interactive-mode-beginning
-;; c-return: C-j haskell-interactive-mode-newline-indent
-;; up/down: <C-down> haskell-interactive-mode-history-next
-
-;; todo haskell mode better binds for:
-;; 'haskell-process-load-file
-;; 'haskell-process-do-type
-;; 'haskell-process-do-info
-;; 'inferior-haskell-send-decl
-
-
-;; commands which don't work in haskell-interactive-mode(hi) vs inferior-haskell-mode(ih, default)
-;; functions not in hi:
-;; inferior-haskell-find-definition, use tags instead
-;; inferior-haskell-find-haddock, todo, test if this works
-
-;; redefined ih to hi
-;; switch-to-haskell -> 'haskell-interactive-switch
-;; haskell-process-load-file -> inferior-haskell-load-file
-;; haskell-process-do-type -> inferior-haskell-type
-;; switch-to-haskell -> haskell-interactive-switch
-;; inferior-haskell-load-file -> 'haskell-process-load-file
-
-
-;; haskell-mode installation from source, based on its readme
-;; in the git directory,
-;; make all
-
-
-
-
-;; remove default option to not link the file
-(setq haskell-compile-command "ghc -Wall -ferror-spans -fforce-recomp %s")
-(add-hook 'haskell-indentation-mode-hook
- (lambda ()
- (define-key haskell-indentation-mode-map [?\C-d] nil)
- (define-key haskell-indentation-mode-map
- (kbd "<deletechar>")
- 'haskell-indentation-delete-char)))
-
-;;copied from haskell-mode docs in order to use the new, better, nondefault
-;;interactive mode.
-(eval-after-load "haskell-mode"
- '(progn
- (define-key haskell-mode-map (kbd "C-x C-d") nil)
- (define-key haskell-mode-map (kbd "C-c C-z") 'haskell-interactive-switch)
- (define-key haskell-mode-map (kbd "C-c C-l") 'haskell-process-load-file)
- (define-key haskell-mode-map (kbd "C-c C-b") 'haskell-interactive-switch)
- (define-key haskell-mode-map (kbd "C-c C-t") 'haskell-process-do-type)
- (define-key haskell-mode-map (kbd "C-c C-i") 'haskell-process-do-info)
- (define-key haskell-mode-map (kbd "C-c M-.") nil)
- (define-key haskell-mode-map (kbd "C-c C-d") nil)))
-
-;; ghc-mod install http://www.mew.org/~kazu/proj/ghc-mod/en/emacs.html
-;; todo, try this out
-;; (autoload 'ghc-init "ghc" nil t)
-;;(add-hook 'haskell-mode-hook (lambda () (ghc-init) (flymake-mode)))
-
-
-
-;; from the package readme for ghci-completion
-(add-hook 'inferior-haskell-mode-hook 'turn-on-ghci-completion)
-
-
-;; disable some rebinds. they are set to appropriate keys in the keybinds section
-(eval-after-load "haskell-mode"
- '(progn
- (define-key haskell-mode-map (kbd "C-a") 'nil)
- (define-key haskell-mode-map (kbd "C-j") 'nil)))
-
-(eval-after-load "python-mode"
- '(progn
- (define-key python-mode-map (kbd "C-j") nil)))
-
-(defun pretty-lambdas-haskell ()
- (font-lock-add-keywords
- nil `((,(concat "(?\\(" (regexp-quote "\\") "\\)")
- (0 (progn (compose-region (match-beginning 1) (match-end 1)
- ,(make-char 'greek-iso8859-7 107))
- nil))))))
-;; from haskell-mode manual
-(add-hook 'haskell-mode-hook 'turn-on-haskell-decl-scan)
-(when (window-system)
- (add-hook 'haskell-mode-hook 'pretty-lambdas-haskell))
-
-;; added from haskell-mode website install instructions
- ;(load "/usr/share/emacs/site-lisp/haskell-mode/haskell-site-file")
-(add-hook 'haskell-mode-hook 'turn-on-haskell-doc-mode)
-;;the three indentation modules are mutually exclusive - add at most one. Trying out the "most advanced"
-(add-hook 'haskell-mode-hook 'turn-on-haskell-indentation)
-;;(add-hook 'haskell-mode-hook 'turn-on-haskell-indent)
-;;(add-hook 'haskell-mode-hook 'turn-on-haskell-simple-indent)
-
-
-;; todo, set this to some other key
-;; (local-set-key (kbd "C-e") 'my-haskell-load-and-run)
-
-(defun my-haskell-load-and-run ()
- "Loads and runs the current Haskell file."
- (interactive)
- (let ((start-buffer (current-buffer)))
- (inferior-haskell-load-and-run inferior-haskell-run-command)
- (sleep-for 0 100)
- (end-of-buffer)
- (pop-to-buffer start-buffer)))
-
-;; show haskell function in mode line
-;; todo, this broke after updating emacs
-;;(eval-after-load "which-func"
-;; '(add-to-list 'which-func-modes 'haskell-mode))
-
-(add-hook 'interactive-haskell-mode-hook 'ac-haskell-process-setup)
-(add-hook 'haskell-interactive-mode-hook 'ac-haskell-process-setup)
-(eval-after-load "auto-complete"
- '(add-to-list 'ac-modes 'haskell-interactive-mode))
-
-(add-hook 'haskell-mode-hook
- (lambda () (define-key haskell-mode-map (kbd "C-(")
- (lambda () (interactive)
- (basic-save-buffer)
- (haskell-compile)
- (run-with-timer .3 nil 'repeat-shell)))))
-(add-hook 'haskell-cabal-mode-hook
- (lambda () (define-key haskell-cabal-mode-map (kbd "C-(") 'haskell-compile)))
-
-
-
-(add-hook 'haskell-interactive-mode-hook
- (lambda ()
- (define-key haskell-interactive-mode-map "\r" nil)
- (define-key haskell-interactive-mode-map (kbd "RET")
- 'haskell-interactive-mode-return)))
-(add-hook 'haskell-indentation-mode-hook (lambda () (define-key haskell-indentation-mode-map "\r" nil)))
-
-
-
-(add-hook 'haskell-interactive-mode-hook
- (lambda ()
- (define-key haskell-interactive-mode-map (kbd "<C-M-return>") 'haskell-interactive-mode-newline-indent)))
-
;;; isearch
(setq
isearch-allow-scroll t
(isearch-yank-symbol partialp)))
-
- ; lets look through emacs starter kit before we throw this out.
-
-
- ; automatically wrap to the top of the buffer when isearch fails
+;; automatically wrap to the top of the buffer when isearch fails
(defadvice isearch-search (after isearch-no-fail activate)
(unless isearch-success
(ad-disable-advice 'isearch-search 'after 'isearch-no-fail)
;; Activate occur easily inside isearch
(define-key isearch-mode-map (kbd "C-o")
- (lambda () (interactive)
- (let ((case-fold-search isearch-case-fold-search))
- (occur (if isearch-regexp
- isearch-string
- (regexp-quote isearch-string))))))
+ (lambda () (interactive)
+ (let ((case-fold-search isearch-case-fold-search))
+ (occur (if isearch-regexp
+ isearch-string
+ (regexp-quote isearch-string))))))
;;; lisp / elisp mode setings
(add-hook 'emacs-lisp-mode-hook 'starter-kit-remove-elc-on-save)
;; interactive modes don't need whitespace checks
(defun interactive-lisp-coding-defaults ()
(whitespace-mode -1))
-(setq prelude-interactive-lisp-coding-hook 'prelude-interactive-lisp-coding-defaults)
+;;; modes with little configuration needed
-;; ielm is an interactive Emacs Lisp shell
-(defun ielm-mode-defaults ()
- (run-hooks 'prelude-interactive-lisp-coding-hook)
- (turn-on-eldoc-mode))
-(add-hook 'ielm-mode-hook 'ielm-mode-defaults)
-;;; mediawiki
-(eval-after-load "mediawiki"
- '(progn
- (remove-hook 'outline-minor-mode-hook 'mediawiki-outline-magic-keys)
- (add-hook 'mediawiki-mode-hook
- (lambda () (define-key mediawiki-mode-map (kbd "C-(") 'mediawiki-save-reload)))
+(custom-set-variables
+ '(css-indent-offset 2)
+ '(sh-here-document-word "'EOF'")
+ '(outline-minor-mode-prefix "\ 3\ 1")
+ '(tramp-default-method "ssh")
+ ;; change last thing from gnu.
+ ;; notably this avoids brace indent after if, and 4 space indent
+ ;; for emacs itself, use
+ ;; (setq c-default-style '((java-mode . "java")
+ ;; (awk-mode . "awk")
+ ;; (other . "gnu")))
+ ;; (setq-default c-basic-offset 2)
+ '(c-default-style '((java-mode . "java")
+ (awk-mode . "awk")
+ (other . "stroustrup")))
+ )
- ;; mediawiki mode has a bug that it will claim an edit conflict unless you reload after saving.
- ;; I also like to save with no edit summary for previewing on my local mw instance
- (defun mediawiki-save-reload ()
- (interactive)
- (and (mediawiki-save "") (mediawiki-reload)))))
-;;; modes with little configuration needed
-;; busted:
-;;(require 'csv-mode)
-;;(add-to-list 'auto-mode-alist '("\\.[Cc][Ss][Vv]\\'" . csv-mode))
-;; disabled temporarily
+(setq
+ ;; ediff-buffers is the main command to use
+ ;; don't start another frame for the control panel
+ ;; unfortunately, this doesn't allow me to use 2 frames for the diff buffers
+ ;; so disable this temporarily with the next line if you want that
+ ;; sometime I should setup 2 functions to explicitly do each type
+ ediff-window-setup-function 'ediff-setup-windows-plain
+ ;;(setq ediff-window-setup-function 'ediff-setup-windows-default)
+ ;; do side by side diffs
+ ediff-split-window-function 'split-window-horizontally
+ ;; ediff things I tried which didn't work, which intuitively I think should
+ ;; work better: I can open the second diff buffer in a new frame, and
+ ;; close it's window in the first frame after starting ediff, but when I
+ ;; hit n to go to the next diff, it restores the window in the first
+ ;; frame. Another thing I tried is to open 2 new frames and set them up
+ ;; as I want. However, if I try to open the *Ediff Control Panel* buffer
+ ;; in a different window from its original one, my mouse jumps to one of
+ ;; the diff frames, or if that isn't visible, the buffer just hangs
+ ;; until I select the original ediff control panel window. This seems
+ ;; like a bug to me. I am using a very recent development version of
+ ;; emacs.
+
+ )
+
+;; disabled temporarily. todo, look into it
;;(add-hook 'outline-minor-mode-hook 'outshine-mode)
-(setq org-caldav-url "https://cal.iankelling.org"
- org-caldav-calendar-id "ian"
- org-caldav-inbox "/p/cal.org")
-;;(org-caldav-sync)
-;;(require 'dtrt-indent)
-;;(setq dtrt-indent-mode t)
+;; this file includes setting up my email addresses, which are not public,
+;; including
+;; mu4e-user-mail-address-list
+;; and a function
+;; inspired by mu4e info manual, search for mu4e-compose-pre-hook.
+(when (file-exists-p "/p/c/mymu4e.el")
+ (load "/p/c/mymu4e"))
-(setq css-indent-offset 2)
(when (file-exists-p "/a/h/iank-mod.el")
(load-file "/a/h/iank-mod.el"))
;; be pasting whitespace significant things in here, so
;; just don't do anything.
;; todo: propose this upstream
+;; fundamental mode for files like .asc
(add-to-list 'ws-butler-global-exempt-modes 'message-mode)
+(add-to-list 'ws-butler-global-exempt-modes 'dns-mode)
+(add-to-list 'ws-butler-global-exempt-modes 'fundamental-mode)
(ws-butler-global-mode)
-
-
-(require 'nginx-mode)
+;; disabled because i dont edit nginx files enough
+;; to have this loaded at startup
+;;(use-package nginx-mode)
;;The mode should automatically activate for files called nginx.conf and files under /etc/nginx - if not, you can add something like this to your init file:
;;(add-to-list 'auto-mode-alist '("/etc/nginx/sites-available/.*" . nginx-mode))
;; todo, put this on a hook with prog mode
;;(highlight-indentation-mode 1)
-(add-hook 'auto-revert-tail-mode-hook
- (lambda ()
- (when (string=
- buffer-file-name
- "/var/log/cloudman/development/cm-service.log")
- (setq-local prev-auto-revert-max 0)
- ;; set buffer-local hook
- (add-hook 'after-revert-hook 'tail-colorize nil t))))
-(defun tail-colorize ()
- (ansi-color-apply-on-region prev-auto-revert-max (point-max))
- (setq-local prev-auto-revert-max (point-max)))
-
-
-;; gnu global
-(add-hook 'c-mode-common-hook
- (lambda () (ggtags-mode 1)
- (setq c-label-minimum-indentation 0)))
-
-(defun my-ggtags-init()
- ;; specific to my unusual keybind setup, you may want to
- ;; pick different keys
- (define-key ggtags-mode-map (kbd "C-M-o") 'ggtags-find-tag-dwim)
- (define-key ggtags-mode-map (kbd "C-M-m") 'ggtags-grep))
-(eval-after-load "ggtags" '(my-ggtags-init))
-
-
-(defun gtags-update-single(filename)
- "Update Gtags database for changes in a single file"
- (interactive)
- (start-process "update-gtags" "update-gtags" "bash" "-c" (concat "cd " ggtags-project-root " ; gtags --single-update " filename )))
-
-(defun gtags-update-current-file()
- (interactive)
- (let ((rel-filename (replace-regexp-in-string
- ggtags-project-root "."
- (buffer-file-name (current-buffer)))))
- (gtags-update-single rel-filename)))
-
-(defun gtags-update-hook()
- "Update GTAGS file incrementally upon saving a file"
- (when (and (boundp 'ggtags-mode) ggtags-mode ggtags-project-root)
- (gtags-update-current-file)))
-
-(add-hook 'after-save-hook 'gtags-update-hook)
-
-;; i'd like to make some elisp which modifies a keymap to remove
-;; all binds which don't match a predicate.
-;; I tried setting a keymap to a new keymap,
-;; but that didn't register as functional.
-;; so I'd need to modify the list in place.
-
-;; colorize hex colors: use rainbow mode
-
-;; message mode prompted me on first message.
-;; a function which describes options then sets this
-;; the other options were to use smtp directly or pass to another mail client
-;; here we use the standard sendmail interface, which I use postfix for
-(setq send-mail-function (quote sendmail-send-it))
-
-(global-set-key (kbd "C-M-w") 'spray-mode)
-;; remember, h/l = move. f/s = faster/slower, space = pause, all others quit
+;; example of a syntax highlighted tail
+(use-package autorevert
+ :defer t
+ :config
+ (defvar prev-auto-revert-max)
+ (defun tail-colorize ()
+ (ansi-color-apply-on-region prev-auto-revert-max (point-max))
+ (setq-local prev-auto-revert-max (point-max)))
+ (add-hook 'auto-revert-tail-mode-hook
+ (lambda ()
+ (when (string=
+ buffer-file-name
+ "/var/log/cloudman/development/cm-service.log")
+ (setq-local prev-auto-revert-max 0)
+ ;; set buffer-local hook
+ (add-hook 'after-revert-hook 'tail-colorize nil t))))
+ )
;; delete active selection with self-insert commands
(delete-selection-mode t)
;; Transparently open compressed files
(auto-compression-mode t)
-;; Highlight matching parenthesesq when the pointq is on them.
-;; not needed since smart paren mode?
-;; (show-paren-mode 1)
-
-
-;; not documented, but looking at the source, I find this
-;; stops me from being asked what command on every C-c-c
-;; when doing a latex document.
-(setq TeX-command-force "LaTeX")
-
;; dot mode, repeats last action
(require 'dot-mode)
-(add-hook 'find-file-hooks 'dot-mode-on)
-
+(add-hook 'find-file-hook 'dot-mode-on)
;; clean up obsolete buffers automatically at midnight
(require 'midnight)
-
-;; disabled because it takes 400ms on startup
-;; ;; emacs regexes are too limited.
-;; (require 'foreign-regexp)
-;; ;; perl is most powerful, but javascript is pretty close and
-;; ;; I'd rather know javascript stuff than perl
-;; (custom-set-variables
-;; '(foreign-regexp/regexp-type 'javascript) ;; Choose by your preference.
-;; '(reb-re-syntax 'foreign-regexp)) ;; Tell re-builder to use foreign regexp.
-;; ;; it would be nice to add documentation to do this for more commands to that package
-;; ;; disabled because it's too slow. but I'd still m-x it for advanced replacements
-;; ;;(define-key global-map [remap isearch-forward-regexp] 'foreign-regexp/isearch-forward)
-
-
;; saner regex syntax
(require 're-builder)
(setq reb-re-syntax 'string)
-;; use shift + arrow keys to switch between visible buffers
-;; todo, set these keys to something else
-;; (require 'windmove)
-;; (windmove-default-keybindings)
-
-
;; show the name of the current function definition in the modeline
-;;(require 'which-func)
-(setq which-func-modes t)
(which-function-mode 1)
-
;; enable winner-mode to manage window configurations
(winner-mode +1)
;; todo, turn on auto-fill just for txt files
;;(add-hook 'text-mode-hook 'turn-on-auto-fill)
-(add-hook 'text-mode-hook 'turn-on-flyspell)
-
-
-;; auto indent shell script comments
-(setq sh-indent-comment t)
;; random extra highlights
(require 'volatile-highlights)
(add-hook 'info-mode-hook 'my-info-init)
-(setq sh-here-document-word "'EOF'")
-
-(setq tramp-default-method "ssh")
;;; misc general settings
+
+;; I tried to look for a function that would set this that is
+;; not part of the emacs interactive customize stuff, but didn't see one
+;; in the faces documentation.
+
+(custom-set-faces
+ ;; custom-set-faces was added by Custom.
+ ;; If you edit it by hand, you could mess it up, so be careful.
+ ;; Your init file should contain only one such instance.
+ ;; If there is more than one, they won't work right.
+ '(header-line ((t (:background "default" :foreground "default" :overline nil :underline nil))))
+ '(region ((t nil))))
+
+
;; from tramp manual, use the same ssh controlmaster. I was having problems with
;; tramp prompting me for a username and pass.
(customize-set-variable 'tramp-use-ssh-controlmaster-options nil)
(setq
+ ;; avoid this stupid prompt when doing sudo-edit
+ ;; Save auth info to file ~/.authinfo? [y/n/N/e/?]
+ ;; which doesn't actually use the default N by pressing enter,
+ ;; and doesn't actually save the 'never' setting like it claims.
+ ;; todo: file a bug.
+ auth-source-save-behavior nil
auto-revert-interval 2
;; fix eof end of file newline
mode-require-final-newline t
require-final-newline t
auto-revert-verbose nil
- auto-revert-remote-files t)
+ auto-revert-remote-files t
+ ;; save bookmarks whenever they are changed instead of just when emacs quits
+ bookmark-save-flag 1
+ ;; increase bookmark context size for better functionality
+ bookmark-search-size 2000
+ ;; https://www.emacswiki.org/emacs/FillParagraph
+ ;; make list items start paragraphs.
+ paragraph-start "\f\\|[ \t]*$\\|[ \t]*[-+*] "
+ sh-basic-offset 2
+ vc-follow-symlinks t
+ dired-confirm-shell-command nil
+ dired-deletion-confirmer '(lambda (x) t)
+ dired-listing-switches "-alh"
+ dired-recursive-deletes 'always
+ dired-clean-confirm-killing-deleted-buffers nil
+ undo-outer-limit 100000000 ; per undo command
+ undo-limit 500000000 ; undo history limit
+ undo-strong-limit 600000000 ; undo history limit plus some extra
+ )
+
+
(ivy-mode 1)
(add-hook 'text-mode-hook (lambda () (auto-fill-mode t)))
;; easier to read with just spaces as separator
(quote (setf (nth 2 ido-decorations) " ")))
-
-;; https://www.emacswiki.org/emacs/FillParagraph
-;; make list items start paragraphs.
-(setq paragraph-start "\f\\|[ \t]*$\\|[ \t]*[-+*] ")
-
-(setq sh-basic-offset 2)
-(setq vc-follow-symlinks t)
-
-;; give us a shell to start instead of scratch
-;;(setq initial-buffer-choice (lambda () (new-shell)))
-
-
;; Seed the random-number generator
(random t)
(setq font-lock-maximum-decoration t
inhibit-startup-message t
transient-mark-mode t
- delete-by-moving-to-trash t
shift-select-mode nil
truncate-partial-width-windows nil
uniquify-buffer-name-style 'forward
- oddmuse-directory "~/.emacs.d/oddmuse"
+ oddmuse-directory (concat user-emacs-directory "oddmuse")
echo-keystrokes 0.1
mark-ring-max 160
sort-fold-case t ; case insensitive line sorting
ring-bell-function 'ignore
case-replace nil
revert-without-query '(".*")
- ;; don't pause display code on input.
- ;; smoother display performance at slight cost of input performance
- redisplay-dont-pause t
font-lock-maximum-decoration t) ; probably default and not necesary
imenu-auto-rescan t
indicate-empty-lines t) ; mark end of buffer
-(require 'smooth-scroll)
-;; long gnus summary buffers lags too much with this,
-;; but I like it enough to leave it enabled by default
-;; and crank up the step size to be faster
-;; and it doesn't have a way to enable it only for certain modes etc.
-;; todo sometime, make it work for certain modes only
-(smooth-scroll-mode t)
-;; its too slow with the default of 2
-(setq smooth-scroll/vscroll-step-size 7)
-;; sublimity doesn't work as good going fast by default
-;; smooth-scrolling.el, does not do smooth scrolling. its about cursor location
-
-(blink-cursor-mode '(-4))
+(blink-cursor-mode 0)
(menu-bar-mode -1)
(tool-bar-mode -1)
(defun fill-buffer ()
(interactive)
(save-mark-and-excursion
- (beginning-of-buffer)
+ (goto-char (point-min))
(while (= (forward-line) 0)
(fill-paragraph))))
;; make window title be the buffer name
(setq frame-title-format "%b")
- ; -----------------------------
- ; fixing up the mode line
- ; modified from mastering emacs blog
- ; ----------------------------
-
-(defvar mode-line-cleaner-alist
- `((auto-complete-mode . "")
- (yas/minor-mode . "")
- (paredit-mode . "")
- (auto-fill-function . "")
- (eldoc-mode . "")
- (abbrev-mode . "")
- (flyspell-mode . "")
- (glasses-mode . "")
- (dot-mode . "")
- (yas-global-mode . "")
- (yas-minor-mode . "")
- (undo-tree-mode . "")
- (volatile-highlights-mode . "")
- (highlight-symbol-mode . "")
- ;; Major modes
- (lisp-interaction-mode . "λ")
- (hi-lock-mode . "")
- (python-mode . "Py")
- (emacs-lisp-mode . "EL")
- (nxhtml-mode . "nx"))
- "Alist for `clean-mode-line'.
-
- When you add a new element to the alist, keep in mind that you
- must pass the correct minor/major mode symbol and a string you
- want to use in the modeline *in lieu of* the original.")
-
-
-(defun clean-mode-line ()
- (interactive)
- (loop for cleaner in mode-line-cleaner-alist
- do (let* ((mode (car cleaner))
- (mode-str (cdr cleaner))
- (old-mode-str (cdr (assq mode minor-mode-alist))))
- (when old-mode-str
- (setcar old-mode-str mode-str))
- ;; major mode
- (when (eq mode major-mode)
- (setq mode-name mode-str)))))
-
- ; disabled
- ; (add-hook 'after-change-major-mode-hook 'clean-mode-line)
-
-
- ;;; alias the new `flymake-report-status-slim' to
- ;;; `flymake-report-status'
-(defalias 'flymake-report-status 'flymake-report-status-slim)
-(defun flymake-report-status-slim (e-w &optional status)
- "Show \"slim\" flymake status in mode line."
- (when e-w
- (setq flymake-mode-line-e-w e-w))
- (when status
- (setq flymake-mode-line-status status))
- (let* ((mode-line " Φ"))
- (when (> (length flymake-mode-line-e-w) 0)
- (setq mode-line (concat mode-line ":" flymake-mode-line-e-w)))
- (setq mode-line (concat mode-line flymake-mode-line-status))
- (setq flymake-mode-line mode-line)
- (force-mode-line-update)))
-
-
(defun my-after-change-major-mode-hook ()
(setq mode-line-mule-info nil
minor-mode-alist nil
(y (cdr pos)))
(set-mouse-position (selected-frame) x y)))
-;;;; keybinds for wow mouse
-
-(global-set-key (kbd "<mouse-6>") 'move-mouse-to-point)
-(global-set-key (kbd "<kp-left>") 'indent-region)
-(global-set-key (kbd "<kp-begin>") 'mark-defun)
-(global-set-key (kbd "<kp-right>") 'ibuffer)
-(global-set-key (kbd "<kp-prior>") 'delete-horizontal-space)
-
;;; org mode
-;; todo work on org-cycle-emulate-tab
+
;; todo, this doesn't work for a non-standard keybind
;;(setq org-special-ctrl-k t)
org-global-properties (quote (("STYLE_ALL" . "habit")))
org-special-ctrl-a/e t ;; home and end work special in headlines
org-completion-use-ido t
+ ;; i had some problem with this in the past, but don't know what, so whatever.
+ org-cycle-emulate-tab nil
org-catch-invisible-edits 'smart)
-;; non universally recommended settings
(setq
org-default-notes-file "/a/t.org"
- org-agenda-files (quote ("/a/t.org"))
- org-mobile-directory "/p/org-mobile"
- org-mobile-inbox-for-pull "/p/from-mobile.org"
org-directory "/p")
;; modeilne populated from (org-clock-get-clocked-time)
(eval-after-load "org"
'(org-clock-persistence-insinuate))
-
(defun time-to-org-day (time)
(round (time-to-number-of-days
(time-subtract time (list 0 (* 3600 org-extend-today-until) 0)))))
-
(defun my-org-confirm-babel-evaluate (lang body)
(not (or (string= (buffer-file-name) "/a/t.org")
- (string= (buffer-file-name) "/home/iank/.emacs.d/my-init.org")
)))
(setq org-confirm-babel-evaluate 'my-org-confirm-babel-evaluate)
;; '(4) is the argument passed by universal prefix
(org-time-stamp (if arg arg '(4)) t))
-(defun ian-org-work-time ()
- (interactive)
- (save-excursion
- (set-buffer "t.org")
- (goto-char (org-find-entry-with-id "ian-identifier-1"))
- (org-clock-in)))
-
-(defun ian-org-idle-time ()
- (interactive)
- (save-excursion
- (goto-char (org-find-entry-with-id "ian-identifier-2"))
- (set-buffer "t.org")
- (org-clock-in)))
-
-
-
;; based on http://stackoverflow.com/questions/3758139/variable-pitch-for-org-mode-fixed-pitch-for-tables
;; keywords: proportional font, monospace
(defun variable-pitch-off ()
(variable-pitch-mode 0))
(add-hook 'yaml-mode-hook 'variable-pitch-off)
+(add-hook 'dns-mode-hook 'variable-pitch-off)
-(eval-after-load "org" '(my-org-face-init))
(defun my-org-face-init()
(set-face-attribute 'org-table nil :family (face-attribute 'fixed-pitch :family))
(set-face-attribute 'org-date nil :family (face-attribute 'fixed-pitch :family))
)
+(eval-after-load "org" '(my-org-face-init))
+
(defun remove-org-binds ()
(define-key org-mode-map (kbd "<M-return>") nil)
(define-key org-mode-map (kbd "C-'") nil)
;; so that I can do completion before the dialog pops up
;;(local-set-key (kbd "<tab>") 'auto-complete)
(local-set-key (kbd "TAB") 'auto-complete)
+ (define-key emacs-lisp-mode-map (kbd "M-q") nil)
+
;; todo, this is causing error message on loading file, prolly not working
;;(flycheck-mode +1)
(setq ac-sources (delq 'ac-source-dictionary ac-sources))
;; this says do autofilling using newcomment.el. The "only" is a misnomer.
(set (make-local-variable 'comment-auto-fill-only-comments) t)
(column-number-mode t)
- (turn-on-smartparens-mode)
+ ;; trying without
+ ;; (turn-on-smartparens-mode)
;; prettify lambdas
(font-lock-add-keywords
nil))))))
(add-hook 'prog-mode-hook 'prog-mode-defaults)
-;; enable flyspell in prog mode. text mode is handled
-(add-hook 'prog-mode-hook 'flyspell-prog-mode)
-
;;; yank auto-indent
;; # eval: (outline-minor-mode)
;; # outline-regexp: "\\( *\\)# [*]\\{1,8\\} "
+(defun outline-level ()
+ "Return the depth to which a statement is nested in the outline.
+Point must be at the beginning of a header line.
+This is actually either the level specified in `outline-heading-alist'
+or else the number of characters matched by `outline-regexp'."
+ (or (cdr (assoc (match-string 0) outline-heading-alist))
+ (let ((whitespace-end (match-end 1))
+ (match-begin (match-beginning 0)))
+ (if (= whitespace-end match-begin)
+ (- (match-end 0) match-begin)
+ (- (match-end 0) whitespace-end)
+ ))))
+;; originally:
+;;(or (cdr (assoc (match-string 0) outline-heading-alist))
+;; (- (match-end 0) (match-beginning 0))))
+
+
;; avoid stupid git crap like "warning, terminal not fully functional"
(setenv "PAGER" "cat")
(shell)))
(add-hook 'shell-mode-hook 'track-shell-directory/procfs)
-;;; smartparens
-;; the melpa git version had a catastrophic bug I reported.
-;; downgraded to marmalade version and everything is working fine.
-(require 'smartparens-config)
-(show-smartparens-global-mode t)
-
-
-(defun gp/sp/pair-on-newline-and-indent (id action context)
- "Open a new brace or bracket expression, with relevant newlines and indent. "
- (save-excursion
- (newline)
- (indent-according-to-mode))
- (indent-according-to-mode))
-
-;; when opening a pair, and then inserting a newline, push the closing pair to another newline
-(sp-pair "{" nil :post-handlers
- '(:add ((lambda (id action context)
- (gp/sp/pair-on-newline-and-indent id action context)) (kbd "RET"))))
-(sp-pair "[" nil :post-handlers
- '(:add ((lambda (id action context)
- (gp/sp/pair-on-newline-and-indent id action context)) (kbd "RET"))))
-
-
-;; in my version, this is not a pairing.
-;; not sure if it is in a future version since I reverted to marmalade
-;; Don't need c-comments in strings -- they frustrate filename globs
-;; (sp-pair "/*" nil :unless '(sp-in-string-p))
-
-;; Don't need quotes to pair next to words
-(sp-pair "\"" nil :unless '(sp-point-before-word-p sp-point-after-word-p))
-(sp-pair "'" nil :unless '(sp-point-before-word-p sp-point-after-word-p))
-
-
-;; todo, testout these mode specific settings from graphene.
-;; Ruby-specific pairs and handlers
-
-(eval-after-load "ruby"
- '(require 'smartparens-ruby))
-
-;; Markdown
-(sp-local-pair '(markdown-mode gfm-mode) "*" "*"
- :unless '(sp-in-string-p)
- :actions '(insert wrap))
-
-;; Except in HTML
-(sp-local-pair 'html-mode "\"" nil :unless '(:rem sp-point-after-word-p))
-
-
-
-
;;; spell correction
(setq
ispell-program-name "hunspell"
ispell-silently-savep t) ; don't prompt to save personal dictionary
-(require 'rw-hunspell)
+(use-package rw-hunspell
+ :defer t)
;; rw-hunspell sets up hunspell dictionary automagically.
+(use-package flyspell
+ :ensure-system-package hunspell
+ :hook ((prog-mode . flyspell-prog-mode)
+ (text-mode . turn-on-flyspell)))
;; Rant: Hunspell SHOULD be standard. its used by firefox and openoffice and
;; osx. In contrast, the first few words I added to aspell dictionary were
;;; tex
-(setq-default TeX-PDF-mode t) ; use pdf
-
- ; more sensible defaults based on info manual quickstart
-(setq TeX-auto-save t)
-(setq TeX-parse-self t)
-
+(use-package latex-mode
+ :no-require t
+ :config
+ (setq-default TeX-PDF-mode t) ; use pdf
+ ;; more sensible defaults based on info manual quickstart
+ (setq TeX-auto-save t
+ TeX-parse-self t
+ ;; not documented, but looking at the source, I find this
+ ;; stops me from being asked what command on every C-c-c
+ ;; when doing a latex document.
+ TeX-command-force "LaTeX"
+ ))
;;; visible mark mode
;; since it is not easy to change the mark overlay priority, I change this one.
(setq show-paren-priority 999)
-
(defface visible-mark-active
'((((type tty) (class mono)))
(t (:background "magenta"))) "")
-
-
(defface mouse-cursor-face
'((((type tty) (class mono)))
(t (:background "DeepPink1"))) "")
(require 'visible-mark)
-(setq visible-mark-faces '(visible-mark-face1 visible-mark-face2))
-(setq visible-mark-forward-faces '(visible-mark-forward-face1))
-
-
- ; highlight the last 2 marks
-(setq visible-mark-max 2)
- ; highlight 1 forward mark
-(setq visible-mark-forward-max 1)
- ; globally activate visible-mark-mode
+(setq
+ visible-mark-faces '(visible-mark-face1 visible-mark-face2)
+ visible-mark-forward-faces '(visible-mark-forward-face1)
+ ;; highlight the last 2 marks
+ visible-mark-max 2
+ ;; highlight 1 forward mark
+ visible-mark-forward-max 1)
+;; globally activate visible-mark-mode
(global-visible-mark-mode +1)
;; if I could define overlay faces to use inverse foreground color
-;;; znc
+;; (setq comment-start "<br align=\"left\"")
+;;
+;; (setq comment-start "#" comment-padding " ")
-(setq erc-fill-prefix "")
+
+;; graphviz fill, for html left aligned labels
+(defun grfil()
+ (interactive)
+ (setq comment-start "<br align=\"left\"/> ")
+ (setq comment-padding " ")
+ (setq fill-column 50)
+ ;; (setq fill-column 30)
+ (mark-paragraph)
+ ;; (call-interactively 'uncomment-region)
+ (fill-paragraph)
+ (call-interactively 'comment-region)
+ (deactivate-mark)
+ (save-excursion
+ (goto-char (region-beginning))
+ (next-line)
+ (comment-line 1)
+ )
+ )
+
+;; (chirp)
+(defun chirp()
+ (message "chirp nothing"))
+;;; znc/erc
(defun chirp()
(interactive)
- (setq vol 50)
- (when (string= (system-name) "kd") (setq vol 80))
+ (setq vol 80)
+ (when (string= (system-name) "kd") (setq vol 60))
;; speed is there so i can adjust and make it go slow so it plays long enough to adjust in pavucontrol
- (start-process-shell-command "ignoreme" nil (format "mpv --speed=1 --no-terminal --vo=null --volume=%d /a/bin/data/bird.mp3" vol)))
+ (start-process-shell-command "ignoreme" nil (format "mpv --speed=1 --no-terminal --vo=null --volume=%d /a/bin/data/d20.wav" vol)))
;; from https://www.emacswiki.org/emacs/ErcSound
(defun chirp-slow()
(interactive)
(setq vol 50)
(when (string= (system-name) "tp") (setq vol 80))
;; speed is there so i can adjust and make it go slow so it plays long enough to adjust in pavucontrol
- (start-process-shell-command "ignoreme" nil (format "mpv --speed=.2 --no-terminal --vo=null --volume=%d /a/bin/data/bird.mp3" vol)))
+ (start-process-shell-command "ignoreme" nil (format "mpv --speed=.2 --no-terminal --vo=null --volume=%d /a/bin/data/d20.wav" vol)))
(defun erc-my-privmsg-sound (proc parsed)
(let* ((tgt (car (erc-response.command-args parsed)))
;; We must return nil. See help for `erc-server-PRIVMSG-functions'
nil)))
-(add-hook 'erc-server-PRIVMSG-functions
- 'erc-my-privmsg-sound)
-
(defun erc-sound-if-not-server (match-type nickuserhost msg)
(unless (string-match "Server:[0-9]+" nickuserhost)
(chirp)))
-(add-hook 'erc-text-matched-hook 'erc-sound-if-not-server)
-
-(eval-after-load "erc"
- '(erc-track-mode 1))
-(setq
- ;; consider invisible frames to be unseen. seems like an obvious default
- erc-track-visibility 'visible
- ;; switch to buffer where i've been mentioned, etc instead of oldest
- erc-track-switch-direction 'importance
- ;; defaults minus fill. todo: modify the list instead of specifying it explicitly in case the defaults change
- erc-modules
- '(autojoin button completion irccontrols list match menu move-to-prompt netsplit networks noncommands readonly ring stamp track)
- )
+(defun erc-sound-if-not-server (match-type nickuserhost msg)
+ ;; (message "d1 %s" nickuserhost)
+ (unless (or (string-match-p "Server:[0-9]+" nickuserhost) (string-match-p "leah" nickuserhost))
+ (chirp)))
+(use-package erc
+ :defer t
+ :custom-face
+ (erc-current-nick-face ((t :weight bold :foreground "red")))
+ :init
+ (which-function-mode 0)
+ ;; fuck that default turquoise
+ (setq erc-fill-prefix ""
+ ;; consider invisible frames to be unseen. seems like an obvious default
+ erc-track-visibility 'visible
+ ;; switch to buffer where i've been mentioned, etc instead of oldest
+ erc-track-switch-direction 'importance
+ ;; defaults minus fill. todo: modify the list instead of specifying it explicitly in case the defaults change
+ erc-modules
+ '(autojoin button completion imenu irccontrols list match menu move-to-prompt netsplit networks noncommands readonly ring stamp track)
+ ;; expanded from https://www.emacswiki.org/emacs/ErcChannelTracking,
+ ;; ignore various messages
+ erc-track-exclude-types '("JOIN" "NICK" "PART" "QUIT" "MODE"
+ "324" "329" "332" "333" "353")
+ ;; seems good, i don't care about the server buffer generally
+ erc-track-exclude-server-buffer t
+ ;; dont highlight channels just cuz of new messages, except for pms or some new channel I haven't listed in my config.
+
+ erc-track-shorten-cutoff 40
+ ;; sed -rn 's/.*(#[^>]*).*/"\1"/p' /p/c/machine_specific/li/filesystem/var/lib/znc/configs/znc.conf
+ erc-track-priority-faces-only (list
+ "#conservancy"
+ "#fosdem"
+ "#fsf"
+ "#fsf-licensing"
+ "#fsfe"
+ "#fsfsys"
+ "#gnu"
+ "#librecmc"
+ "#libreplanet"
+ "#mnt-reform"
+ "#nouveau"
+ "#pump.io"
+ "#savannah"
+ "#seagl"
+ "#social"
+ "#spamassassin"
+ "#talos-workstation"
+ "#trisquel"
+ "#trisquel-dev"
+ "#overseers"
+ "#gdb"
+ "#gcc"
+ "#glibc"
+ "#binutils"
+ "#gnu-linux-libre"
+ "#parabola"
+ "#guix"
+ "#gnu-ops"
+ "#gcc"
+ )
+ ;; so that we don't show channels where i havent been mmentioned
+ erc-track-faces-priority-list '(erc-current-nick-face
+ erc-keyword-face
+ erc-pal-face
+ erc-nick-msg-face
+ erc-direct-msg-face
+ erc-fool-face)
+
+
+ ) ; end setq
+
+:config
+(add-hook 'erc-server-PRIVMSG-functions
+ 'erc-my-privmsg-sound)
+(add-hook 'erc-text-matched-hook 'erc-sound-if-not-server)
+(erc-track-mode 1)
+(defun erc-track--switch-buffer (fun arg)
+ (if (not erc-track-mode)
+ (message (concat "Enable the ERC track module if you want to use the"
+ " tracking minor mode"))
+ (cond (erc-modified-channels-alist
+ ;; if we're not in erc-mode, set this buffer to return to
+ (if-let ((buf (erc-track-get-active-buffer arg))
+ ((buffer-live-p buf)))
+ (funcall fun buf)
+ (erc-modified-channels-update)
+ (erc-track--switch-buffer fun arg)))
+ ;; if no active channels, switch back to what we were doing before
+ (t (switch-to-buffer "#fsfsys")))))
+)
;;; named commands
(defun rm-file-and-buffer ()
"Removes file connected to current buffer and kills buffer."
;; worth the benefit of only having one concept in my mind.
(dolist
(r `(
- (?i (file . ,"~/.emacs.d/init.el"))
- (?o (file . ,"/a/work.org"))
+ (?i (file . ,(concat user-emacs-directory "init.el")))
+ (?o (file . ,"/b/w/work.org"))
(?t (file . ,"/a/t.org"))
(?s (file . ,"/usr/share/doc/exim4-base/spec.txt.gz"))
(?w (file . ,"/p/w.org"))
undo-strong-limit 600000000) ; undo history limit plus some extra
-;;; undo tree mode
+;;; undo-fu mode
-;; note, this has weird errors when it was before recentf-mode
+;; thank god i'm done with undo-tree and the bug where my auto-saveing
+;; would cause it to lose all undo history, strangely especially in
+;; email buffers. it would claim the undo was outside the visible
+;; buffer.
+
+(use-package undo-fu
+ :config
+ (global-unset-key (kbd "C-z")))
-;; more resilient undo-tree-history if we have its location set up front.
-(setq undo-tree-history-directory-alist '(("." . "~/.undo-tree-history")))
+(use-package undo-fu-session
+ :if (string= (daemonp) "server")
+ :config
+ (setq undo-fu-session-incompatible-files '("/COMMIT_EDITMSG\\'" "/git-rebase-todo\\'")))
+(when (string= (daemonp) "server")
+ (unless (equal (user-uid) 0) ; don't make root owned files
+ (global-undo-fu-session-mode)
+ (when (file-exists-p "/p/c/undo-fu-session")
+ (setq undo-fu-session-directory "/p/c/undo-fu-session"))
+ ))
-;; todo, send patch undo-tree-visualize should scroll with the scroll key, instead of just pgup pgdn (aka next/prior)
-(global-undo-tree-mode)
-;; disabled due to bug, something like unknown entry in undo tree canary
-;; (setq undo-tree-auto-save-history t)
-(setq undo-outer-limit 100000000 ; per undo command
- undo-limit 500000000 ; undo history limit
- undo-strong-limit 600000000) ; undo history limit plus some extra
-;; Undo in region just happens accidentally, and throws me off
-(setq undo-tree-enable-undo-in-region nil)
;;; keybinds
(define-prefix-command 'terminal-key-map)
(global-set-key (kbd "\e[") 'terminal-key-map)
-
-
(global-set-key (kbd "C-x C-b") 'ibuffer)
;; from starter-kit
(define-key isearch-mode-map (kbd "C-o")
- (lambda () (interactive)
- (let ((case-fold-search isearch-case-fold-search))
- (occur (if isearch-regexp
- isearch-string
- (regexp-quote isearch-string))))))
+ (lambda () (interactive)
+ (let ((case-fold-search isearch-case-fold-search))
+ (occur (if isearch-regexp
+ isearch-string
+ (regexp-quote isearch-string))))))
(defun my-isearch-toggle-regexp ()
;;;; single/special keys
;;;;; tab - isearch
;; todo: this doesnt work. needs <tab>, which doesnt work in terminal. fix that.
-;; (define-key isearch-mode-map (kbd "TAB") 'isearch-query-replace)
-(define-key isearch-mode-map (kbd "M-f") 'isearch-query-replace)
+(define-key isearch-mode-map (kbd "TAB") 'isearch-query-replace)
;;;;; f12 - isearch-forward
;; explained in http://stackoverflow.com/questions/7411920/how-to-bind-search-and-search-repeat-to-c-f-in-emacs
(global-set-key (kbd "<kp-add>") 'isearch-forward)
(global-set-key (kbd "<f12>") 'isearch-forward)
-(define-key isearch-mode-map "\t" nil)
(define-key isearch-mode-map (kbd "<kp-add>") 'isearch-repeat-forward)
(define-key isearch-mode-map (kbd "<f12>") 'isearch-repeat-forward)
;; get rid of the standard completion binding, always use auto-complete
(global-set-key (kbd "<home>") 'back-to-indentation-or-beginning)
;;;;; s-tab - indent-buffer
-;; graphical
-(global-set-key (kbd "<S-iso-lefttab>") 'indent-buffer)
-;; terminal
+;; This is translated from S-<iso-lefttab> in graphicsal mode. previously, I had
+;; also set (kbd "<S-iso-lefttab>"),
+;; But I stopped because it overrides minor mode mappings, and i don't want to do that, at least not only in graphical mode.
+;;
(global-set-key (kbd "<backtab>") 'indent-buffer)
+
+(add-hook 'org-mode-hook
+ (lambda ()
+ (define-key org-mode-map (kbd "<backtab>") nil)))
+
;;;;; s-delete - send-shell
(global-set-key (kbd "<S-delete>") 'send-shell)
(add-hook 'org-mode-hook
(lambda ()
(define-key org-mode-map (kbd "<S-right>") nil)))
-;;;;; esc
- ; todo, test out if this can be used
+;;;;; esc --- terminal dup
+;; todo, test out if this can be used
;;;;; return - new line
;; todo, this doesn't set the keybind for the help minibuffer
(global-set-key (kbd "C-M-3") 'recenter-top-bottom)
-;;;;; C-q org-cycle, comint previous arg
+;;;;; C-q org/bicycle-cycle, comint previous arg
(global-set-key (kbd "C-q") 'bicycle-cycle)
(add-hook 'org-mode-hook
(add-hook 'comint-mode-hook
(lambda () (define-key comint-mode-map (kbd "C-q") 'comint-insert-previous-argument)))
-;;;;; M-q org-archive-to-archive-sibling
+;;;;; M-q org/bicycle-cycle global
-(global-set-key (kbd "M-q") 'org-archive-to-archive-sibling)
+(add-hook 'org-mode-hook
+ (lambda ()
+ (define-key org-mode-map (kbd "M-q") 'org-shifttab)))
+(global-set-key (kbd "M-q") 'bicycle-cycle-global)
;;;;; C-M-q quoted-insert
(global-set-key (kbd "C-e") 'copy-line)
-;;;;; M-e org-clock-in-last
-
-(global-set-key (kbd "M-e") 'org-clock-in-last)
+;;;;; M-e ?? unused
;;;;; C-r isearch-backward
(lambda ()
(define-key comint-mode-map (kbd "C-r") 'comint-history-isearch-backward-regexp)))
-;;;;; M-r org-clock-out
+;;;;; M-r ?? unused
-(global-set-key (kbd "M-r") 'org-clock-out)
;;;;; C-a copy buffer
(global-set-key (kbd "C-a") 'copy-all)
;;;;; C-s - c-x prefix
- ; prefix key binds.
- ; good info http://www.masteringemacs.org/articles/2011/02/08/mastering-key-bindings-emacs/
- ; rebinding the prefix keys are tricky. apparently, some modes ignore any redefinition of a prefix key and use it explicitly,
- ; so you have to dig into their key maps and redo things.
- ; There are 2 simpler alternatives which have their own downsides.
- ; One is cua mode, which I do not like because it smashes 2 keybinds onto 1 and limits what you can do.
- ; The other is keyboard-translate, which translates the key presses before anything else.
- ; The downside is that it translates them when you aren't using them as a prefix.
- ; Since the swaps I'm using are all very accessible, the only downside is some mental jugling when reading docs etc about these keybinds.
-
- ; I've seen this as an another suggestion, it was a total fail. The prefix command took over both keys.
- ; (define-key key-translation-map [f12] "\C-c")
- ; (define-key key-translation-map "\C-c" [left])
-
-
- ;idea to remove the hook later since it is only needed at startup.
- ; did not work however, and there is not a real need to fix it, so I did not investigate
- ;(defun removeSwapHook ()
- ; (remove-hook 'buffer-list-update-hook 'myKeySwap)
- ; (remove-hook 'change-major-mode-hook 'removeSwapHook))
- ;(add-hook 'change-major-mode-hook 'removeSwapHook)
-
-
- ; went through almost all the relevant standard hooks,
- ; this overcomes a known bug that (keyboard-translate) does not get applied when running emacs daemon
+;; prefix key binds.
+;; good info http://www.masteringemacs.org/articles/2011/02/08/mastering-key-bindings-emacs/
+;; rebinding the prefix keys are tricky. apparently, some modes ignore any redefinition of a prefix key and use it explicitly,
+;; so you have to dig into their key maps and redo things.
+;; There are 2 simpler alternatives which have their own downsides.
+;; One is cua mode, which I do not like because it smashes 2 keybinds onto 1 and limits what you can do.
+;; The other is keyboard-translate, which translates the key presses before anything else.
+;; The downside is that it translates them when you aren't using them as a prefix.
+;; Since the swaps I'm using are all very accessible, the only downside is some mental jugling when reading docs etc about these keybinds.
+
+;; I've seen this as an another suggestion, it was a total fail. The prefix command took over both keys.
+;; (define-key key-translation-map [f12] "\C-c")
+;; (define-key key-translation-map "\C-c" [left])
+
+
+;;idea to remove the hook later since it is only needed at startup.
+;; did not work however, and there is not a real need to fix it, so I did not investigate
+;;(defun removeSwapHook ()
+;; (remove-hook 'buffer-list-update-hook 'myKeySwap)
+;; (remove-hook 'change-major-mode-hook 'removeSwapHook))
+;;(add-hook 'change-major-mode-hook 'removeSwapHook)
+
+
+;; went through almost all the relevant standard hooks,
+;; this overcomes a known bug that (keyboard-translate) does not get applied when running emacs daemon
(add-hook 'buffer-list-update-hook (lambda () (interactive)
(keyboard-translate ?\C-x ?\C-s)
(keyboard-translate ?\C-s ?\C-x)
- ; these all don't work
- ; don't know why this doesn't error but reversing the keys does
- ;(keyboard-translate ?\t ?\M-\t)
- ;(keyboard-translate [M-tab] [tab])
- ; from what i can tell, it wants to use a keyboard-translate-table,
- ; which is a char table, which is a vector indexed by chars,
- ; and mod+tab is not a char (it has too many bits), it is an integer
- ; it actually says it can hold vectors or strings, but that it is obsolete to do so
- ;(characterp ?\M-a)
- ;(characterp ?\C-a)
+;; these all don't work
+;; don't know why this doesn't error but reversing the keys does
+;;(keyboard-translate ?\t ?\M-\t)
+;;(keyboard-translate [M-tab] [tab])
+;; from what i can tell, it wants to use a keyboard-translate-table,
+;; which is a char table, which is a vector indexed by chars,
+;; and mod+tab is not a char (it has too many bits), it is an integer
+;; it actually says it can hold vectors or strings, but that it is obsolete to do so
+;;(characterp ?\M-a)
+;;(characterp ?\C-a)
;;;;; C-M-s - split-window-vertically
(global-set-key (kbd "M-d") 'run)
-;;;;; C-M-d - swap buffer across windows
-;; from http://www.emacswiki.org/emacs/TransposeWindows
+;;;;; C-M-d - split-window-horizontally
+
+(global-set-key (kbd "C-M-d") 'split-window-horizontally)
-(setq swapping-buffer nil)
-(setq swapping-window nil)
-(defun swap-buffers-in-windows ()
- "Swap buffers between two windows"
- (interactive)
- (if (and swapping-window
- swapping-buffer)
- (let ((this-buffer (current-buffer))
- (this-window (selected-window)))
- (if (and (window-live-p swapping-window)
- (buffer-live-p swapping-buffer))
- (progn (switch-to-buffer swapping-buffer)
- (select-window swapping-window)
- (switch-to-buffer this-buffer)
- (select-window this-window)
- (message "Swapped buffers."))
- (message "Old buffer/window killed. Aborting."))
- (setq swapping-buffer nil)
- (setq swapping-window nil))
- (progn
- (setq swapping-buffer (current-buffer))
- (setq swapping-window (selected-window))
- (message "Buffer and window marked for swapping."))))
-
-(global-set-key (kbd "C-M-d") 'swap-buffers-in-windows)
;;;;; C-f - kill-whole-line
(global-set-key (kbd "M-g") 'abort-recursive-edit)
-;;;;; C-M-g - gnus
+;;;;; C-M-g - mu4e
(global-set-key (kbd "C-M-g") 'mu4e)
;;;;; C-z - undo-only
-(global-set-key (kbd "C-z") 'undo-tree-undo)
+;;(global-set-key (kbd "C-z") 'undo-tree-undo)
+(global-set-key (kbd "C-z") 'undo-fu-only-undo)
;;;;; C-M-z - suspend-frame
(global-set-key (kbd "C-M-z") 'suspend-frame)
;; this is never good in a gui
;; todo; check out smex-show-unbound-commands shows frequently used commands that have no key bindings.
;; this must be before smex-initialize
(setq
- smex-save-file "~/.emacs.d/.smex-items")
+ smex-save-file (concat user-emacs-directory ".smex-items"))
;; this uses smex
(global-set-key (kbd "M-x") 'counsel-M-x)
;;;;; C-c - copy
(global-set-key (kbd "C-d") 'kill-ring-save)
-(add-hook 'c-mode-hook
- (lambda () (define-key c-mode-map (kbd "C-d") nil)))
+(add-hook 'c-mode-common-hook
+ (lambda ()
+ (define-key c-mode-map (kbd "C-d") nil)
+ (define-key c++-mode-map (kbd "C-d") nil)))
(add-hook 'comint-mode-hook
(lambda ()
(define-key comint-mode-map (kbd "C-d") nil)))
;;;;; M-c - delete-other-windows
-;; todo, consider binding/using org-capture
(define-key global-map "\M-c" 'delete-other-windows)
;;;;; C-M-c - copy-to-register
(global-set-key (kbd "C-v") 'yank-better)
+(add-hook 'ivy-mode-hook
+ (lambda ()
+ (define-key ivy-minibuffer-map (kbd "C-v") nil)))
+
(defun yank-better (arg)
(progn (basic-save-buffer) (delete-frame))
(save-buffers-kill-terminal t))))
-;;;;; C-* - split-window-horizontally
-(global-set-key (kbd "C-*") 'split-window-horizontally)
+;;;;; C-* - --- terminal
;;;;; C-M-* - calc-dispatch
(global-set-key (kbd "C-M-*") 'calc-dispatch)
(defun vim-style-join-line ()
(interactive)
(join-line '(4)))
+;; terminal
+(global-set-key (kbd "C-_") 'vim-style-join-line)
+;; gui
(global-set-key (kbd "C-/") 'vim-style-join-line)
-(define-key undo-tree-map (kbd "C-/") nil)
;;;;; C-M-/ - copy-buffer-file-name
(lambda ()
(define-key org-mode-map (kbd "C-t") 'org-todo)))
+
+
(defun my-comint-previous-input (arg)
(interactive "*p")
(if (comint-after-pmark-p)
;;;;; C-home - start of buffer
;;;;; C-end - end of buffer
;;;; right secondary
-;;;;; C-^ - save-buffers-kill-emacs
+;;;;; C-^ - save-buffers-kill-emacs exit quit
(global-set-key (kbd "C-^") 'save-buffers-kill-emacs)
;;;;; C-M-- - org-edit-src-exit
;;;;; C-y - undo
-(global-set-key (kbd "C-y") 'undo-tree-redo)
+;;(global-set-key (kbd "C-y") 'undo-tree-redo)
+(global-set-key (kbd "C-y") 'undo-fu-only-redo)
(add-hook 'org-mode-hook
(lambda () (define-key org-mode-map (kbd "C-y") nil)))
;; Local Variables:
;; eval: (outline-minor-mode)
+;; outline-regexp: "\\( *\\);;;\\{1,8\\} "
;; End:
iankelling.org / git / dot-emacs / blobdiff