2 # Copyright (C) 2019 Ian Kelling
3 # SPDX-License-Identifier: AGPL-3.0-or-later
4 # this gets sourced. shebang is just for file mode detection
11 source /a
/bin
/distro-setup
/path-add-function
13 # add this with absolute paths as needed for better security
14 #path-add --end /path/to/node_modules/.bin
16 #path-add --end /usr/lib/node_modules/corepack/shims/
18 # pip3 --user things go here:
19 path-add
--end ~
/.local
/bin
20 path-add
--ifexists --end /a
/work
/libremanage
21 path-add
--ifexists --end /a
/opt
/adt-bundle
*/tools
/a
/opt
/adt-bundle
*/platform-tools
22 path-add
--ifexists --end /a
/opt
/scancode-toolkit-3.10.
30 SL_SSH_ARGS
="-F $HOME/.ssh/confighome"
37 # generated instead of dynamic for the benefit of shellcheck
38 #for x in /a/bin/distro-functions/src/* /a/bin/!(githtml)/*-function?(s); do echo source $x ; done
39 source /a
/bin
/distro-functions
/src
/identify-distros
40 source /a
/bin
/log-quiet
/logq-function
41 # for x in /a/bin/bash_unpublished/source-!(.#*); do echo source $x; done
42 source /a
/bin
/bash_unpublished
/source-semi-priv
43 source /a
/bin
/bash_unpublished
/source-state
45 source /a
/bin
/log-quiet
/logq-function
46 if [[ -s /a
/opt
/alacritty
/extra
/completions
/alacritty.bash
]]; then
47 source /a
/opt
/alacritty
/extra
/completions
/alacritty.bash
57 m pactl unload-module module-loopback
58 m pactl unload-module module-null-sink
59 m pactl unload-module module-remap-source
61 sources
=($
(pacmd list-sources |
sed -rn 's/.*name: <([^>]+).*/\1/p'))
65 for s
in ${sources[@]}; do
72 m pactl load-module module-null-sink sink_name
=ianinput sink_properties
=device.description
=ianinputs
74 m pactl load-module module-loopback
source=${sources[i]} sink_dont_move
=true sink
=ianinput
76 pactl load-module module-remap-source source_name
=iancombine master
=ianinput.monitor source_properties
=device.description
=iancombine
82 sed '/^ *IdentityFile/d' ~
/.ssh
/config
>$d/config
83 s
command ssh -F $d/config
-i /q
/root
/h
"$@"
89 sed '/^ *IdentityFile/d' ~
/.ssh
/config
>$d/config
90 s rsync
-e "ssh -F $d/config -i /q/root/h" "$@"
98 if [[ $arg == [89]0Etiona
* ]]; then
100 rtime
=${arg#*Etiona} # remote time
101 if [[ ! $rtime ]]; then
104 dir
=/a
/opt
/emacs-trisquel
${v}-nox/.iank
105 ltime
=$
(stat
-c%Y
$dir/e
/e
/.emacs.d
/init.el
)
106 if (( ltime
> rtime
)); then
107 m rsync
-rptL --delete --filter=". /b/ds/sl/rsync-filter" $dir "$remote":/home
/iank
113 local f
=/home
/iank
/.emacs.d
/init.el
114 sl
--sl-test-cmd ". /etc/os-release ; printf %s \${VERSION//[^a-zA-Z0-9]/}; test -e $f && stat -c%Y $f" --sl-test-hook slemacs
"$@"
118 # Run this manually after .emacs.d changes. Otherwise, to check if
119 # files changed with find takes 90ms. sl normally only adds 25ms. We
120 # could cut it down to 10ms if we put things on a btrfs filesystem and
121 # looked for changes there, or used some inotify thing, but that seems
122 # like too much work.
123 egh
() { # emacs gnuhope
124 RSYNC_RSH
=ssh m rsync
-rptL --delete --filter=". /b/ds/sl/rsync-filter" /a
/opt
/emacs-trisquel9-nox
/.iank lists2d.fsf.org
:.ianktrisquel_9
125 RSYNC_RSH
=ssh m rsync
-rptL --delete --filter=". /b/ds/sl/rsync-filter" /a
/opt
/emacs-trisquel8-nox
/.iank lists2d.fsf.org
:/home
/iank
128 local shell
="bash -s"
129 if [[ $HOSTNAME != kw
]]; then
130 shell
="ssh kw.office.fsf.org"
134 sudo mkdir /root/.ianktrisquel_9
135 sudo rsync -rptL --delete --filter=". /b/ds/sl/rsync-filter" /a/opt/emacs-trisquel9-nox/.iank /root/.ianktrisquel_9
136 rsync -rptL --delete --filter=". /b/ds/sl/rsync-filter" /a/opt/emacs-trisquel8-nox/.iank /home/iank
140 # usage mkschroot [-] distro codename packages
141 # - means no piping in of sources.list
144 while [[ $1 == -* ]]; do
146 -f) force
=true
; shift ;;
149 if [[ ! -s $sources ]]; then
150 echo mkschroot
: error
: sources
file $sources does not exist or is empty
161 repo
=http
://mirror.fsf.org
/trisquel
/
164 repo
=http
://archive.ubuntu.com
/ubuntu
/
167 repo
=http
://deb.debian.org
/debian
/
173 if ! $force && schroot
-l |
grep -xFq chroot
:$n; then
174 echo "$0: $n schroot already installed, skipping"
179 sd
/etc
/schroot
/chroot.d
/$n.conf
<<EOF
185 preserve-environment=true
189 if [[ ! -e $d/bin
]]; then
191 # resolvconf otherwise schroot fails with
192 # cp: not writing through dangling symlink '/var/run/schroot/mount/flidas-7a2362e0-81b3-4848-92c1-610203ef5976/etc/resolv.conf'
193 sudo debootstrap
--exclude=resolvconf
$n $d $repo
195 if [[ $sources ]]; then
196 sudo
install -m 644 $sources $d/etc
/apt
/sources.list
198 sudo chroot
$d apt-get update
199 sudo DEBIAN_FRONTEND
=noninteractive chroot
$d apt-get
-y dist-upgrade
--purge --auto-remove
200 sudo
cp -P {,$d}/etc
/localtime
201 if (( ${#apps[@]} )); then
202 sudo DEBIAN_FRONTEND
=noninteractive schroot
-c $n -- apt-get
install --allow-unauthenticated -y ${apps[@]}
207 # note: this is incomplete and untested.
208 # https://wiki.archlinux.org/index.php/Install_Arch_Linux_from_existing_Linux#Creating_a_chroot
211 mirror
=https
://mirrors.edge.kernel.org
/archlinux
/iso
/latest
/
212 tarball
=$
(curl
-s $mirror |
sed -nr 's/.*"(archlinux-bootstrap-.*-x86_64.tar.gz)".*/\1/p')
213 wget
-O /tmp
/arch.
tar.gz https
://mirrors.edge.kernel.org
/archlinux
/iso
/latest
/$tarball
214 s mkdir
-p /nocow
/schroot
/arch
215 cd _
/nocow
/schroot
/arch
216 s
sed -i '/## United States/,/^$/s,^#,,' etc
/pacman.d
/mirrorlist
217 # error: could not determine cachedir mount point /var/cache/pacman/pkg
218 s
sed -i /^CheckSpace
/d etc
/pacman.conf
219 chroot .
/bin
/bash
-s <<'EOF'
221 pacman-key --populate archlinux
224 # example of building an aur package:
225 # pacman -Sy base-devel wget
227 # f=$target/etc/sudoers
228 # line='iank ALL=(ALL) NOPASSWD: ALL'
229 # if [[ ! -e $f ]] || ! grep -xF "$line" $f; then
233 # wget https://aur.archlinux.org/cgit/aur.git/snapshot/anbox-image-gapps.tar.gz
234 # tar xzf anbox-image-gapps.tar.gz
235 # cd anbox-image-gapps
240 # clock back in to timetrack from last entry
242 sqlite3
/p
/.timetrap.db
"update entries set end = NULL where id = (select max(id) from entries);"
246 # s sshfs bu@$host:/bu/home/md /bu/mnt -o reconnect,ServerAliveInterval=20,ServerAliveCountMax=30 -o allow_other
249 enn
-M $
(exiqgrep
-i)
252 enn
-M $
(exiqgrep
-i|h1
)
257 /a
/f
/gnulib
/build-aux
/gnupload
"$@"
263 f
=(/p
/c
/firefox
*/compatibility.ini
)
264 if (( ${#f[@]} )); then
270 if shopt nullglob
>/dev
/null
; then
284 s checkrestart
-b /a
/bin
/ds
/checkrestart-blacklist
-pv
287 cp-blocked-domains-to-brains
() {
288 cp /a
/f
/ans
/roles
/exim
/files
/mx
/simple
/etc
/exim
4/bad-sender_domains
/a
/f
/brains
/sysadmin
/kb
/blocked_email_domains.mdwn
290 cp-blocked-domains-to-ansible
() {
291 cp /a
/f
/brains
/sysadmin
/kb
/blocked_email_domains.mdwn
/a
/f
/ans
/roles
/exim
/files
/mx
/simple
/etc
/exim
4/bad-sender_domains
296 # crashes on adding new cards in t9
297 schroot
-c buster
-- anki
302 hrcat
/m
/md
/alerts
/{cur
,new
}/*
305 ssh bk.b8.nz
"shopt -s nullglob; hrcat /m/md/INBOX/new/* /m/md/INBOX/cur/*"
309 rm -f /m
/md
/alerts
/{cur
,new
}/*
311 ssh bk.b8.nz
"shopt -s nullglob; rm -f /m/md/INBOX/new/* /m/md/INBOX/cur/*"
316 find /var
/local
/cron-errors
/home
/iank
/cron-errors
/sysd-mail-once-state
-type f
318 ralerts
() { # remote alerts
320 # this list is duplicated in check-remote-mailqs
321 for h
in bk je li frodo kwwg x3wg x2wg kdwg sywg
; do
324 if [[ $HOSTNAME == "${h%wg}" ]]; then
328 $shell find /var
/local
/cron-errors
/home
/iank
/cron-errors
/sysd-mail-once-state
-type f || ret
=$?
336 # pushd in case current directory has an ansible.cfg file
337 pushd /a
/xans
>/dev
/null
338 ansible-playbook
-v -l ${1:- $(hostname -f)} site.yml
342 pushd /a
/work
/ans
>/dev
/null
343 time ansible-playbook
-v -i inventory adhoc.yml
"$@"
347 pushd /a
/bin
/distro-setup
/a
>/dev
/null
348 ansible-playbook site.yml
"$@"
353 # googling android emulator libGL error: failed to load driver: r600
354 # lead to http://stackoverflow.com/a/36625175/14456
355 export ANDROID_EMULATOR_USE_SYSTEM_LIBS
=1
356 /a
/opt
/android-studio
/bin
/studio.sh
"$@" &r
;
359 # note, to check for glue records
360 # First, find some the .org nameservers:
361 # dig +trace iankelling.org
363 # dig ns1.iankelling.org @b0.org.afilias-nst.org.
365 # Now, compare for a domain that does have glue records setup (note the A
366 # and AAAA records in ADDITIONAL SECTION, those are glue records like the
367 # one I'm asking for):
369 # $ dig ns1.gnu.org @b0.org.afilias-nst.org.
371 # todo: make sm pull/push use systemd instead of the journal cat command
372 bbk
() { # btrbk wrapper
376 systemctl is-active btrbk.timer || active
=false
380 if [[ $
(systemctl is-active btrbk.service ||
:) != inactive
]]; then
381 echo "cron btrbk is already running"
382 if $active; then ser start btrbk.timer
; fi
387 # todo: consider changing this to srun and having the args come
388 # from a file like /etc/default/btrbk, like is done in exim
389 s jrun btrbk-run
"$@"
392 echo bbk
: WARNING
: btrbk.timer not restarted due to failure
394 ser start btrbk.timer
401 fai-monitor | pee
cat "fai-monitor-gui -"
404 bfg
() { java
-jar /a
/opt
/bfg-1.12
.14.jar
"$@"; }
407 xclock
-digital -update 1 -face 'arial black-80:bold'
410 nnn
() { /a
/opt
/nnn
-H "$@"; }
412 locat
() { # log-once cat
415 files
=(/var
/local
/cron-errors
/* /home
/iank
/cron-errors
/* /sysd-mail-once-state
/*)
429 # duplicated somewhat below.
430 jrun
() { # journal run. run args, log to journal, tail and grep the journal.
431 # Note, an alternative without systemd would be something like ts.
432 # Note, I tried using systemd-cat, but this seems obviously better,
433 # and that seemed to have a problem exiting during a systemctl daemon-reload
434 local cmd_name jr_pid s
438 if [[ $cmd != /* ]]; then
441 journalctl
-qn2 -f -u "$cmd_name" &
442 # Guess of time needed to avoid missing initial lines.
443 # .5 was not reliable. 1 was not reliable. 2 was not reliable
445 # We kill this in prompt-command for the case that we ctrl-c the
446 # systemd-cat. i dont know any way to trap ctrl-c and still run the
447 # normal action for it. There might be a way, unsure.
449 # note, we could have a version that does system --user, but if for example
450 # it does sudo ssh, that will leave a process around that we can't kill
451 # and it will leave the unit hanging around in a failed state needing manual
452 # killing of the process.
453 m s systemd-run
--uid $
(id
-u) --gid $
(id
-g) \
454 -E SSH_AUTH_SOCK
=/run
/openssh_agent \
455 --unit "$cmd_name" --wait --collect "$cmd" "${@:2}" || ret
=$?
456 # This justs lets the journal output its last line
457 # before the prompt comes up.
459 kill $jr_pid &>/dev
/null ||
:
463 # service run, and watch the output
468 journalctl
-qn2 -f -u $unit &
469 systemctl start
$unit
471 kill $jr_pid &>/dev
/null ||
:
480 keyhash
=$
(s ssh-keygen
-lf /root
/.ssh
/home |
awk '{print $2}')
481 tmp
=$
(s ssh-add
-l |
awk '$2 == "'$keyhash'"')
482 if [[ ! $tmp ]]; then
483 s ssh-add
/root
/.ssh
/home
486 s jrun switch-mail-host
"$@"
490 # shellcheck disable=SC2120
492 # note, i had --delete-excluded, but that deletes all files in --exclude-from on
493 # the remote site, which doesn't make sense, so not sure why i had it.
495 p
=(/a
/opt
/{emacs-debian11
{,-nox},mu
,emacs
} /a
/bin
/a
/exe
/a
/h
/a
/c
/p
/c
/machine_specific
/vps
{,.hosts
})
496 a
="-ahviSAXPH --specials --devices --delete --relative --exclude-from=/p/c/li-rsync-excludes"
498 for h
in li je bk
; do
499 m s rsync
"$@" $a ${p[@]} /p
/c
/machine_specific
/$h root@
$h.b8.nz
:/ || ret
=$?
500 # only li is debian11
501 p
[0]=/a
/opt
/emacs-ubuntu20.04
502 p
[1]=/a
/opt
/emacs-ubuntu20.04
-nox
504 m s rsync
"$@" -ahviSAXPH root@li.b8.nz
:/a
/h
/proposed-comments
/ /a
/h
/proposed-comments || ret
=$?
507 bkpush
() { # no emacs. for running faster.
508 p
=(/a
/bin
/a
/exe
/a
/h
/a
/c
/p
/c
/machine_specific
/vps
{,.hosts
})
509 a
="-ahviSAXPH --specials --devices --delete --relative --exclude-from=/p/c/li-rsync-excludes"
511 m rsync
"$@" $a ${p[@]} /p
/c
/machine_specific
/bk root@bk.b8.nz
:/ || ret
=$?
514 jepush
() { # no emacs. for running faster.
515 p
=(/a
/bin
/a
/exe
/a
/h
/a
/c
/p
/c
/machine_specific
/vps
{,.hosts
})
516 a
="-ahviSAXPH --specials --devices --delete --relative --exclude-from=/p/c/li-rsync-excludes"
518 m rsync
"$@" $a ${p[@]} /p
/c
/machine_specific
/je root@je.b8.nz
:/ || ret
=$?
523 dsign iankelling.org expertpathologyreview.com zroe.org amnimal.ninja
547 local f
=/var
/lib
/bind
/db.b8.nz
551 m sudo
install -m 644 -o bind -g bind /p
/c
/machine_specific
/vps
/bind-initial
/db.b8.nz
$f
555 # keys generated like this
556 # because of https://ftp.isc.org/isc/dnssec-guide/dnssec-guide.pdf
557 # https://blog.apnic.net/2019/05/23/how-to-deploying-dnssec-with-bind-and-ubuntu-server/
559 # key length is longer than that guide because
560 # we are using those at fsf and when old key lengths
561 # become insecure, I want some extra time to update.
565 dnssec-keygen
-a RSASHA256
-b 2048 $zone
566 dnssec-keygen
-f KSK
-a RSASHA256
-b 4096 $zone
567 for f
in K
$zone.
*.key
; do
568 # eg Kb8.nz.+008+47995.key tag=47995
569 # in dnsimple, you add the long string from this.
570 # in gandi, you add the long string from the .key file,
571 # then see that the digest matches the ds.
572 echo "tag is the number after DS"
573 dnssec-dsfromkey
-a SHA-256
$f
575 # For b8.nz, we let bind read the keys and sign, and
576 # right now they have root ownership, so let them
581 # create .signed file
582 # note: full paths probably not needed.
585 local zone
=${arg#db.}
586 local dir
=/p
/c
/machine_specific
/vps
/filesystem
/var
/lib
/bind
587 dnssec-signzone
-S -e +31536000 -o $zone -K $dir -d $dir $dir/db.
$zone
592 #### begin bitcoin related things
594 local f
=/etc
/bitcoin
/bitcoin.conf
595 # importprivkey will timeout if using the default of 15 mins.
596 # upped it to 1 hour.
597 bitcoin-cli
-rpcclienttimeout=60000 -$
(s
grep rpcuser
= $f) -$
(s
grep rpcpassword
= $f) "$@"
599 btcusd
() { # $1 btc in usd
601 price
="$(curl -s https://api.coinbase.com/v2/prices/BTC-USD/spot | jq -r .data.amount)"
602 printf "$%s\n" "$price"
604 printf "$%.2f\n" "$(echo "scale
=4; $price * $1"| bc -l)"
607 usdbtc
() { # $1 usd in btc
609 price
="$(curl -s https://api.coinbase.com/v2/prices/BTC-USD/spot | jq -r .data.amount)"
610 printf "$%s\n" "$price"
612 # 100 mil satoshi / btc. 8 digits after the 1.
613 printf "%.8f btc\n" "$(echo "scale
=10; $1 / $price "| bc -l)"
616 satoshi
() { # $1 satoshi in usd
618 price
="$(curl -s https://api.coinbase.com/v2/prices/BTC-USD/spot | jq -r .data.amount)"
619 price
=$
(echo "scale=10; $price * 0.00000001"|
bc -l)
620 printf "$%f\n" "$price"
622 printf "$%.2f\n" "$(echo "scale
=10; $price * $1"| bc -l)"
625 #### end bitcoin related things
629 cbfstool
() { /a
/opt
/coreboot
/build
/cbfstool
"$@"; }
635 cp /a
/bin
/data
/COPYING
"$@"
637 cp /a
/bin
/data
/COPYING .
644 cp /a
/bin
/data
/LICENSE
"$@"
646 cp /a
/bin
/data
/LICENSE .
651 if type -p chromium
&>/dev
/null
; then
655 cmd
="schroot -c bullseye chromium"
656 CHROMIUM_FLAGS
='--enable-remote-extensions' $cmd &r
662 # pipe to this, or just type like a shell
665 tee >(ssh frodo.b8.nz
) >(ssh x2
) >(ssh tp.b8.nz
) >(ssh kw
) >(ssh tp.b8.nz
)
669 for host in x2 kw tp.b8.nz x3.b8.nz frodo.b8.nz
; do
675 debian_pick_mirror
() {
676 # netselect-apt finds a fast mirror.
677 # but we need to replace the mirrors ourselves,
678 # because it doesnt do that. best it can do is
679 # output a basic sources file
680 # here we get the server it found, get the main server we use
681 # then substitute all instances of one for the other in the sources file
682 # and backup original to /etc/apt/sources.list-original.
683 # this is idempotent. the only way to identify debian sources is to
684 # note the original server, so we put it in a comment so we can
687 file=$
(mktemp
-d)/f
# safe way to get file name without creating one
688 sudo netselect-apt
-o "$file" ||
return 1
689 url
=$
(grep ^
\\w
$file |
head -n1 |
awk '{print $2}')
690 sudo
cp -f /etc
/apt
/sources.list
/etc
/apt
/sources.list-original
691 sudo
sed -ri "/http.us.debian.org/ s@( *[^ #]+ +)[^ ]+([^#]+).*@\1$url\2# http.us.debian.org@" /etc
/apt
/sources.list
695 digdiff @ns
{1,2}.iankelling.org
"$@"
699 "$@" |
& ts ||
return $?
709 /b
/ds
/distro-begin |
& ts ||
return $?
710 /b
/ds
/distro-end |
& ts ||
return $?
716 /b
/ds
/distro-begin |
& ts ||
return $?
722 /b
/ds
/distro-end |
& ts ||
return $?
735 envload
() { # load environment from a previous: export > file
736 local file=${1:-$HOME/.${USER}_env}
737 eval "$(export | sed 's/^declare -x/export -n/')"
738 while IFS
= read -r line
; do
739 # declare -x makes variables local to a function
740 eval ${line/#declare -x/export}
744 failfunc
() { asdf a b c
; }
745 failfunc2
() { failfunc d e f
; }
747 # one that comes with distros is too old for newer devices
749 /a
/opt
/android-platform-tools
/fastboot
"$@";
752 kdecd
() { /usr
/lib
/x86_64-linux-gnu
/libexec
/kdeconnectd
; }
755 cat /sys
/class
/power_supply
/BAT
0/capacity
758 # List of apps to install/update
759 # Create from existing manually installed apps by doing
761 # fdroidcl search -i, then manually removing
762 # automatically installed/preinstalled apps
765 # # my attempt at recovering from boot loop:
766 # # in that case, boot to recovery (volume up, home button, power, let go of power after samsun logo)
768 # mount /dev/block/mmcblk0p12 /data
770 # find -iname '*appname*'
772 # usually good enough to just rm -rf /data/app/APPNAME
775 # # causes replicant to crash
776 # org.quantumbadger.redreader
777 # org.kde.kdeconnect_tp
779 # not broke, but wont work without gps
780 #com.zoffcc.applications.zanavi
781 # not broke, but not using atm
782 #com.nutomic.syncthingandroid
783 # # doesn\'t work on replicant
784 #net.sourceforge.opencamera
787 net.mullvad.mullvadvpn
789 io.github.subhamtyagi.lastlauncher
791 com.biglybt.android.client
792 de.marmaro.krt.ffupdater
793 me.ccrama.redditslide
794 org.fedorahosted.freeotp
796 com.alaskalinuxuser.justnotes
797 com.artifex.mupdf.viewer.app
798 com.danielkim.soundrecorder
801 com.jmstudios.redmoon
803 org.kde.kdeconnect_tp
806 cz.martykan.forecastie
809 de.marmaro.krt.ffupdater
810 eu.siacs.conversations
812 im.vector.alpha
# riot
814 me.tripsit.tripmobile
816 net.minetest.minetest
821 org.smssecure.smssecure
823 sh.
ftp.rocketninelabs.meditationassistant.opensource
825 # https://forum.xda-developers.com/android/software-hacking/wip-selinux-capable-superuser-t3216394
830 local -A installed updated
832 # tried putting this in go buildscript cronjob,
833 # but it failed with undefined: os.UserCacheDir. I expect its due to
834 # an environment variable missing, but its easier just to stick it here.
835 m go get
-u mvdan.cc
/fdroidcl ||
return 1
837 if fdroidcl search
-u |
grep ^org.fdroid.fdroid
; then
838 fdroidcl
install org.fdroid.fdroid
842 for p
in $
(fdroidcl search
-i|
grep -o "^\S\+"); do
845 for p
in $
(fdroidcl search
-u|
grep -o "^\S\+"); do
848 for p
in ${fdroid_pkgs[@]}; do
849 if ! ${installed[$p]:-false}; then
850 m fdroidcl
install $p
851 # sleeps are just me being paranoid since replicant has a history of crashing when certain apps are installed
855 for p
in ${!installed[@]}; do
856 if ! ${updated[$p]:-true}; then
857 m fdroidcl
install $p
863 firefox-default-profile
() {
864 key
=Default value
=1 section
=$1
865 file=/p
/c
/subdir_files
/.mozilla
/firefox
/profiles.ini
866 sed -ri "/^ *$key/d" "$file"
867 sed -ri "/ *\[$section\]/,/^ *\[[^]]+\]/{/^\s*$key[[:space:]=]/d};/ *\[$section\]/a $key=$value" "$file"
869 fdhome
() { #firefox default home profile
870 firefox-default-profile Profile0
874 firefox-default-profile Profile4
878 if type -P firefox
&>/dev
/null
; then
886 firefox
-P alt
"$@" >/dev
/null
2>&1
892 local dname
="${PWD##*/}"
893 local m
="/a/tmp/$dname-missing"
894 local d
="/a/tmp/$dname-diff"
895 [[ -e $d ]] && rm "$d"
896 [[ -e $m ]] && rm "$m"
899 while read -r line
; do
901 if [[ -e "$fsfile" ]]; then
902 md5diff
"$line" "$fsfile" && tee -a "/a/tmp/$dname-diff" <<< "$fsfile $line"
908 done < <(find .
-type f
)
911 (( msize
<= 100 )) && cat $m
915 # expected output, with different tmp dirs
916 # /tmp/tmp.HDPbwMqdC9/c/d ./c/d
917 # /a/tmp/tmp.qLDkYxBYPM-missing
927 echo different
> $x/c
/d
932 # test whether missing files were renamed, generally for use with fsdiff
933 # $1 = fsdiff output file, $2 = directory to compare to. pwd = fsdiff dir
934 # echos non-renamed files
938 { sums
+=( "$(md5sum < "$x")" ) ; } 2>/dev
/null
940 while read -r line
; do
941 { missing_sum
=$
(md5sum < "$line") ; } 2>/dev
/null
943 for x
in "${sums[@]}"; do
944 if [[ $missing_sum == "$x" ]]; then
949 $renamed ||
echo "$line"
955 # F = fullscren, z = random, Z = auto zoom
956 command feh
-FzZ "$@"
962 firefox
-P default
"$@" >/dev
/null
2>&1
966 git config user.email ian@iankelling.org
969 # at least in flidas, things rely on gpg being gpg1
971 if type -P gpg2
&>/dev
/null
; then
979 local email
=ian@iankelling.org
980 git send-email
--notes "--envelope-sender=<$email>" \
981 --suppress-cc=self
"$@"
984 gup
() { /a
/f
/gnulib
/build-aux
/gnupload
"$@"; }
986 dejagnu
() { /a
/opt
/dejagnu
/dejagnu
"$@"; }
989 # do git status on published repos.
992 cd $
(readlink
-f $x)/..
993 status
=$
(i status
-s) ||
pwd
994 if [[ $status ]]; then
997 printf "%s\n" "$status"
1006 for (( i
=0; i
<60; i
++ )); do
1007 day
=$
( date +%F
-d @$
((EPOCHSECONDS
- 86400*i
)) )
1008 date "+%a %b %d" -d @$
((EPOCHSECONDS
- 86400*i
)) |
tr '\n' ' '
1009 /a
/opt
/timetrap
/bin
/t d
-ftotal -s $day -e $day all
-m '^w|lunch$'
1012 to
() { t out
-a "$@"; }
1013 ti
() { t
in -a "$@"; }
1018 m t out
-a $
(date +%F.
%T
-d @$
(( $
(date -d "$(echo $*|sed 's/[_.]/ /g')" +%s
) + 60*45 )) )
1022 arbttlog
() { arbtt-dump
"$@" |
grep -v '( )\|Current Desktop' |
sed -rn '/^[^ ]/{N;s/^(.{21})([0-9]*)[0-9]{3}m.*\(\*/\1\2/;s/^(.{21})[0-9]*.*\(\*/\1/;s/\n//;p}' ; }
1025 /a
/opt
/idea-IC-163.7743
.44/bin
/idea.sh
"$@" &r
1029 ssh root@iankelling.org
"cd /var/lib/znc/moddata/log/iank/freenode/ && hr && for x in \#$1/*; do base=\${x##*/}; files=(); for f in $@; do tmp=\#\$f/\$base; if [[ -e \$tmp ]]; then files+=(\#\$f/\$base); fi; done; sed \"s/^./\${base%log}/\" \${files[@]}|sort -n; hr; done"
1034 # use * instead of -r since that does sorted order
1035 ssh root@iankelling.org
"for n in freenode libera; do cd /var/lib/znc/moddata/log/iank/\$n/$chan && hr && for x in *; do echo \$x; sed \"s/^./\${x%log}/\" \$x; hr; done; done" |
less +G
1039 if type gio
&> /dev
/null
; then
1041 elif type gvfs-open
&> /dev
/null
; then
1046 # another alternative is run-mailcap
1051 # grep -Evi -e "^(\S+\s+){4}(sudo|sshd|cron)\[\S*:" \
1052 # -e "^(\S+\s+){4}systemd\[\S*: (starting|started) (btrfsmaintstop|dynamicipupdate|spamd dns bug fix cronjob|rss2email)\.*$"
1055 # journalctl -n 10000 -f "$@" | jfilter
1057 # jr() { journalctl "$@" | jfilter | less ; }
1058 # jrf() { journalctl -n 200 -f "$@" | jfilter; }
1060 jr
() { journalctl
"$@" ; }
1061 jrf
() { journalctl
-n 200 -f "$@" ; }
1064 ccomp journalctl jtail jr jrf
1066 kff
() { # keyboardio firmware flash
1067 pushd /a
/bin
/distro-setup
/Arduino
/Model01-Firmware
1068 yes $
'\n' |
make flash
1073 local umask_orig name
1074 if (( $# != 1 )); then
1075 e expected
1 arg
>&2
1081 wg genkey |
tee $name-priv.key | wg pubkey
> $name-pub.key
1085 if (( $# != 2 )); then
1086 e expected
2 arg of hostname
, ip suffix
>&2
1089 local host ipsuf umask_orig
1092 mkdir
-p /p
/c
/machine_specific
/$host/filesystem
/etc
/wireguard
1093 cd /p
/c
/machine_specific
/$host/filesystem
/etc
/wireguard
1096 wg genkey |
tee hole-priv.key | wg pubkey
> hole-pub.key
1097 cat >wghole.conf
<<EOF
1099 # contents hole-priv.key
1100 PrivateKey = $(cat hole-priv.key)
1102 Address = 10.8.0.$ipsuf/24
1103 # https://dev.to/tangramvision/what-they-don-t-tell-you-about-setting-up-a-wireguard-vpn-1h2g
1104 # ||: makes the systemd service not fail due to the failed command
1105 PostUp = ping -c1 10.8.0.1 ||:
1108 # li. called wgmail on that server
1109 PublicKey = CTFsje45qLAU44AbX71Vo+xFJ6rt7Cu6+vdMGyWjBjU=
1110 AllowedIPs = 10.8.0.0/24
1111 Endpoint = 72.14.176.105:1194
1112 PersistentKeepalive = 25
1115 # old approach. systemd seems to work fine and cleaner.
1116 rm -f ..
/network
/interfaces.d
/wghole
1117 cedit
-q $host /p
/c
/machine_specific
/li
/filesystem
/etc
/wireguard
/wgmail.conf
<<EOF || [[ $? == 1 ]]
1119 PublicKey = $(cat hole-pub.key)
1120 AllowedIPs = 10.8.0.$ipsuf/32
1128 if [[ $1 == /* ]]; then
1130 if mountpoint
-q /mnt
/$base; then
1133 l
=$
(losetup
-j $1 |
sed -rn 's/^([^ ]+): .*/\1/p' |
head -n1 ||
:)
1135 l
=$
(sudo losetup
-f)
1136 m sudo losetup
$l $1
1138 if ! sudo cryptsetup status
/dev
/mapper
/$base &>/dev
/null
; then
1139 if ! sudo cryptsetup luksOpen
$l $base; then
1140 m sudo losetup
-d $l
1144 m sudo mkdir
-p /mnt
/$base
1145 m sudo mount
/dev
/mapper
/$base /mnt
/$base
1146 m sudo chown
$USER:$USER /mnt
/$base
1149 if mountpoint
/mnt
/$base &>/dev
/null
; then
1150 m sudo umount
/mnt
/$base
1152 if sudo cryptsetup status
/dev
/mapper
/$base &>/dev
/null
; then
1153 if ! m sudo cryptsetup luksClose
/dev
/mapper
/$base; then
1154 echo lom
: failed cryptsetup luksClose
/dev
/mapper
/$base
1158 l
=$
(losetup
-l --noheadings |
awk '$6 ~ /\/'$1'$/ {print $1}')
1160 m sudo losetup
-d $l
1162 echo lom
: warning
: no loopback device found
1167 # mu personality. for original, just run mp. for 2, run mp 2.
1168 # this is partly duplicated in mail-setup
1172 if ! killall mu
; then
1179 echo error
: mu not dead
1184 set -- /m
/mucache ~
/.cache
/mu
/m
/.mu ~
/.config
/mu
1189 if [[ -e $f && ! -L $f ]]; then
1192 m
ln -sf -T $target $f
1196 # these might need a mu index or something added.
1201 [[ -e $src ]] ||
{ echo "src:$src does not exist"; return 1; }
1203 m
ln -s -T $dst $src
1211 if [[ ! -e $src ||
-L $src ]]; then
1214 [[ -e $src ]] ||
{ echo "src:$src does not exist"; return 1; }
1216 m
ln -sf -T $dst $link
1224 [[ -e $src ]] ||
{ set +x
; return 1; }
1225 if [[ -L $dst ]]; then rm $dst; fi
1232 markdown
"$1" >/tmp
/mdtest.html
1233 firefox
/tmp
/mdtest.html
1236 mo
() { xset dpms force off
; } # monitor off
1239 mpv
--profile=d
"$@";
1242 mpv
--profile=s
"$@";
1250 d
=( /var
/lib
/znc
/moddata
/log
/iank
/{freenode
,libera
} )
1251 # use * instead of -r since that does sorted order
1252 ssh root@iankelling.org
"for f in ${d[@]}; do cd \$f/#$1; grep '\<iank.*' *; done" | cut
--complement -c12-16
1255 c
/p
/c
/.purple
/logs
/jabber
/iank@fsf.org
/office@conference.fsf.org.chat
1256 for x
in *.html
; do html2text
-o ${x%.html}.txt
$x; done;
1257 grep -A1 ') iank:' *.txt |
sed -r 's/^(.{10})[^ ]*\.txt:\(?([^ ]*)[[:space:]](..). iank:/\1_\2_\3/;s/^[^ ]*\.txt-//;/^--$/d;s/^[^ ]*\.txt:\((.{2}).(.{2}).(.{4}) (.{8}) (.{2})\)?/\3-\1-\2_\4_\5/' |
sed -n 'x;1d;0~2{G;s/\n/ /;p};${x;p}'
1261 d
=/var
/lib
/znc
/moddata
/log
/iank
/freenode
1262 ssh root@iankelling.org
"cd $d; find . -mtime -60 -type f -exec grep '\<iank.*' {} +" |
sed -r 's,^..([^/]*)/(.{11})(.{5})(.{8}).,\2\4 \1,' |
sort
1266 local time time_sec time_pretty
1267 sqlite3
-separator ' ' /p
/c
/subdir_files
/.local
/share
/gajim
/logs.db
"select time, message from logs where contact_name = 'iank' and jid_id = 17;" |
while read -r time l
; do
1272 if ! time_pretty
=$
(date +%F.
%R
-d @
$time); then
1273 echo bad
time: $time
1276 echo $time_pretty "$l"
1277 time_sec
=${time%%.*}
1278 # only look at the last 18 days. generally just use this for timesheet.
1279 if (( time_sec
< EPOCHSECONDS
- 60 * 60 * 24 * 18 )); then break; fi
1284 sqlite3
-separator ' ' /p
/c
/subdir_files
/.local
/share
/gajim
/logs.db
"select time, message from logs" |
less
1288 e
"lspci -nnk|gr -iA2 net"
1289 lspci
-nnk|gr
-iA2 net
1291 e
"s lshw -C network"
1293 sudo lshw
-C network
1297 ser stop NetworkManager
1298 ser disable NetworkManager
1299 ser stop NetworkManager-wait-online.service
1300 ser disable NetworkManager-wait-online.service
1302 sudo resolvconf
-d NetworkManager
1308 ser start NetworkManager
1314 oathtool
--totp -b "$*" | xclip
-selection clipboard
1317 "$@" |
& pee
"xclip -r -selection clipboard"
1322 # from http://askubuntu.com/questions/456021/remove-vocals-from-mp3-and-get-only-instrumentals
1323 pactl load-module module-ladspa-sink sink_name
=Karaoke master
=alsa_output.usb-Audioengine_Audioengine_D1-00.analog-stereo plugin
=karaoke_1409 label
=karaoke control
=-30
1326 pfind
() { #find *$1* in $PATH
1327 [[ $# != 1 ]] && { echo requires
1 argument
; return 1; }
1329 IFS
=: pathArray
=($PATH); unset IFS
1330 find "${pathArray[@]}" -iname "*$1*"
1334 # trash-restore lists everything that has been trashed at or below CWD
1335 # This picks out files just in CWD, not subdirectories,
1336 # which also match grep $1, usually use $1 for a time string
1337 # which you get from running restore-trash once first
1340 # last condition is to not ask again for ones we skipped
1341 while name
="$( echo | restore-trash | gr "$PWD/[^
/]\
+$
" | gr "$1" )" \
1342 && [[ $name ]] && (( $
(wc -l <<<"$name") >= nth
)); do
1343 name
="$(echo "$name" | head -n $nth | tail -n 1 )"
1344 read -r -p "$name [Y/n] " ask
1345 if [[ ! $ask ||
$ask == [Yy
] ]]; then
1346 x
=$
( echo "$name" | gr
-o "^\s*[0-9]*" )
1347 echo $x | restore-trash
> /dev
/null
1348 elif [[ $ask == [Nn
] ]]; then
1358 rld
/a
/h
/_site
/ li
:/var
/www
/iankelling.org
/html
1363 # fixes the menu bar in xmonad. this won\'t be needed when xmonad
1364 # packages catches up on some changes in future (this is written in
1367 # geekosaur: so youll want to upgrade to xmonad 0.13 or else use a
1368 # locally modified XMonad.Hooks.ManageDocks that doesnt set the
1369 # work area; turns out it\'s impossible to set correctly if you are
1370 # not a fully EWMH compliant desktop environment
1372 # geekosaur: chrome shows one failure mode, qt/kde another, other
1373 # gtk apps a third, ... I came up with a setting that works for me
1374 # locally but apparently doesnt work for others, so we joined the
1375 # other tiling window managers in giving up on setting it at all
1377 xprop
-root -remove _NET_WORKAREA
1381 # reviewboard, used at my old job
1382 #rbpipe() { rbt post -o --diff-filename=- "$@"; }
1383 #rbp() { rbt post -o "$@"; }
1391 # only run on MAIL_HOST. simpler to keep this on one system.
1392 r2eadd
() { # usage: name url
1393 # initial setup of rss2email:
1394 # r2e new r2e@iankelling.org
1395 # that initializes files, and sets default email.
1396 # symlink to the config doesnt work, so I copied it to /p/c
1397 # and then use cli option to specify explicit path.
1398 # Only option changed from default config is to set
1401 # or else for a few feeds, the from address is set by the feed, and
1402 # if I fail delivery, then I send a bounce message to that from
1403 # address, which makes me be a spammer.
1405 r2e add
$1 "$2" $1@r2e.iankelling.org
1406 # get up to date and dont send old entries now:
1407 r2e run
--no-send $1
1409 r2e
() { command r2e
-d /p
/c
/rss2email.json
-c /p
/c
/rss2email.cfg
"$@"; }
1411 rspicy
() { # usage: HOST DOMAIN
1412 # connect to spice vm remote host. use vspicy for local host
1414 # shellcheck disable=SC2087
1416 sudo virsh dumpxml $2|grep "<graphics.*type='spice'" | \
1417 sed -rn "s/.*port='([0-9]+).*/\1/p"
1420 if [[ $port ]]; then
1421 spicy
-h $1 -p $port
1423 echo "error: no port found. check that the domain is running."
1429 # s gem install scss-lint
1430 pushd /a
/opt
/thoughtbot-guides
1433 scss-lint
-c /a
/opt
/thoughtbot-guides
/style
/sass
/.scss-lint.yml
"$@"
1437 sk
-e 2120,245 /b
/ds
/brc
/b
/ds
/brc2
1442 out
=${2:-${1%.*}.sh}
1444 script -t -c "mpv --no-config --no-resume-playback --no-terminal --no-audio-display '$1'" $tmp/typescript
2>$tmp/timing
1445 # todo, the current sleep seems pretty good, but it
1446 # would be nice to have an empirical measurement, or
1447 # some better wait to sync up.
1449 # note: --loop-file=no prevents it from hanging if you have that
1450 # set to inf the mpv config.
1451 # --loop=no prevents it from exit code 3 due to stdin if you
1452 # had it set to inf in mpv config.
1454 # args go to mpv, for example --volume=80, 50%
1455 cat >$out <<EOFOUTER
1457 trap "trap - TERM && kill 0" INT TERM ERR; set -e
1458 ( sleep .2; scriptreplay <( cat <<'EOF'
1462 $(cat $tmp/typescript)
1465 base64 -d - <<'EOF'| mpv --loop=no --loop-file=no --no-terminal --no-audio-display "\$@" -
1474 smeld
() { # ssh meld usage host1 host2 file
1475 meld
<(ssh $1 cat $3) <(ssh $2 cat $3)
1479 PATH
=/usr
/local
/spdhackfix
:$PATH command spd
"$@"
1483 sudo systemctl
suspend
1486 spamf
() { # spamtest on FILE
1487 local spamcpre spamdpid
1489 if (( $# != 1 )); then
1490 e spamtest error
: expected
1 arg
, filename
>&2
1494 spamdpid
=$
(systemctl status spamassassin|
sed -n '/^ *Main PID:/s/[^0-9]//gp')
1495 spamcpre
="nsenter -t $spamdpid -n -m"
1496 s
$spamcpre sudo
-u Debian-exim spamassassin
-t --cf='score PYZOR_CHECK 0' <"$1"
1502 declare -gi _seq
; _seq
+=1
1503 echo "test body" | m
mail -s "test mail from $HOSTNAME, $_seq" "${@:-root@localhost}"
1504 # for testing to send from an external address, you can do for example
1505 # -fian@iank.bid -aFrom:ian@iank.bid web-6fnbs@mail-tester.com
1506 # note in exim, you can retry a deferred message
1508 # MSG_ID is in /var/log/exim4/mainlog, looks like 1ccdnD-0001nh-EN
1511 # to test sieve, use below command. for fsf mail, see offlineimap-sync script
1512 # make modifications, then copy to live file, use -eW to actually modify mailbox
1514 # Another option is to use sieve-test SCRIPT MAIL_FILE. note,
1515 # sieve-test doesnt know about envelopes, Im not sure if sieve-filter does.
1517 # sieve with output filter. arg is mailbox, like INBOX.
1518 # This depends on dovecot conf, notably mail_location in /etc/dovecot/conf.d/10-mail.conf
1520 # always run this first, edit the test files, then run the following
1522 sieve-filter ~
/sieve
/maintest.sieve
${1:-INBOX} delete
2> >(head; tail) >/tmp
/testsieve.log
&& sed -rn '/^Performed actions:/,/^[^ ]/{/^ /p}' /tmp
/testsieve.log |
sort |
uniq -c
1525 c ~
/sieve
; cp personal
{test,}.sieve
; cp lists
{test,}.sieve
; cp personalend
{test,}.sieve
1526 sieve-filter
-eWv ~
/sieve
/maintest.sieve
${1:-INBOX} delete
&> /tmp
/testsieve.log
1527 sed -r '/^info: filtering:/{h;d};/^info: msgid=$/N;/^info: msgid=.*left message in mailbox [^ ]+$/d;/^info: msgid=/{H;g};/^info: message kept in source mailbox.$/d' /tmp
/testsieve.log
1532 # printf "subject\nbody\n" | alertme
1537 To: alerts@iankelling.org
1544 To: alerts@iankelling.org
1556 To: daylert@iankelling.org
1563 To: daylert@iankelling.org
1572 # alert when a page goes live. not urgent.
1575 tmpdir
="$(mktemp -d)"
1578 if torsocks wget
-q "$url"; then
1581 sleep $
(( 600 + RANDOM
% 300 ))
1588 # testmail above calls sendmail, which is a link to exim/postfix.
1589 # its docs dont say a way of adding an argument
1590 # to sendmail to turn on debug output. We could make a wrapper, but
1591 # that is a pain. Exim debug args are documented here:
1592 # http://www.exim.org/exim-html-current/doc/html/spec_html/ch-the_exim_command_line.html
1594 # http://www.exim.org/exim-html-current/doc/html/spec_html/ch-building_and_installing_exim.html
1595 # note, for exim daemon, you can turn on debug options by
1596 # adding -d, etc to COMMONOPTIONS in
1597 # /etc/default/exim4
1599 # to specify recipients other than those in to, cc, bcc, you can use the cli args, eg:
1600 # exim -t 'test@zroe.org, t2@zroe.org' <<'EOF'
1602 # -t = get recipient from header
1604 From: i@dmarctest.b8.nz
1605 To: mailman@dev.fsf.org
1607 Reply-to: rtest@iankelling.org
1609 This is a test message.
1616 # https://askubuntu.com/questions/160945/is-there-a-way-to-disable-a-laptops-internal-keyboard
1617 id
=$
(xinput
--list --id-only 'AT Translated Set 2 keyboard')
1618 if xinput list |
grep -F '∼ AT Translated Set 2 keyboard' &>/dev
/null
; then
1619 echo enabling keyboard
1620 # find the first slave keyboard number, they are all the same in my output.
1621 # if they werent, worst case we would need to save the slave number somewhere
1622 # when it got disabled.
1623 slave
=$
(xinput list |
sed -n 's/.*slave \+keyboard (\([0-9]*\)).*/\1/p' |
head -n1)
1624 xinput reattach
$id $slave
1633 (sleep $
(calc
"$* * 60") && mpv
--no-config --volume 50 /a
/bin
/data
/alarm.mp3
) > /dev
/null
2>&1 &
1636 trg
() { transmission-remote-gtk
& r
; }
1638 # example, set global upload limit to 100 kilobytes:
1640 TR_AUTH
=":$(jq -r .profiles[0].password ~/.config/transmission-remote-gtk/config.json)" transmission-remote transmission.lan
-ne "$@"
1647 for (( i
=0; i
< retries
- 1; i
++ )); do
1659 if [[ -e $1 && ! -w $1 ||
! -w $
(dirname "$1") ]]; then
1662 # full path for using in some initial setup steps
1669 ecmd
="/usr/sbin/exim4 -C /etc/exim4/my.conf"
1670 if ip a show veth1-mail
&>/dev
/null
; then
1674 pid
=$
(pgrep
-f "/usr/sbin/exim4 -bd -q30m -C /etc/exim4/my.conf"|h1
)
1675 m s nsenter
-t $pid -n -m $ecmd "$@"
1678 sdnbash
() { # systemd namespace bash
1680 m sudo nsenter
-t $
(systemctl show
--property MainPID
--value $unit) -n -m sudo
-u $USER -i bash
1684 m sudo nsenter
-t $
(systemctl show
--property MainPID
--value mailnn
) -n -m sudo
-u $USER -i bash
1688 m sudo nsenter
-t $
(pgrep
-f "/usr/sbin/openvpn .* --config /etc/openvpn/.*mail.conf") -n -m sudo
-u $USER -i bash
1692 pid
=$
(pgrep
-f "/usr/sbin/exim4 -bd -q30m -C /etc/exim4/my.conf"|h1
)
1693 if [[ ! $pid ]]; then
1694 echo "eximbash: failed to find exim pid. systemctl -n 30 status exim4:"
1695 systemctl status exim4
1697 m sudo nsenter
-t $pid -n -m
1701 spamdpid
=$
(systemctl show
--property MainPID
--value spamassassin
)
1702 m sudo nsenter
-t $spamdpid -n -m sudo
-u Debian-exim spamassassin
"$@"
1705 m sudo nsenter
-t $
(systemctl status unbound|
sed -n '/^ *Main PID:/s/[^0-9]//gp') -n -m sudo
-u $USER -i bash
1709 local p pid ns mailnn
1710 # mailvpn would belong on the list if using openvpn
1711 for p
in mailnn unbound dovecot spamassassin exim4 radicale
; do
1714 pid
=$
(ps
-eo pid
,cgroup |
grep /system.slice
/$p.service |
awk '{print $1}')
1717 pid
=$
(s systemctl show
--property MainPID
--value $p)
1721 if [[ ! $pid ]]; then
1722 echo failed to
find pid
for $p
1725 if ! ns
=$
(s readlink
/proc
/$pid/ns
/net
); then
1726 echo failed to
find ns
for $p pid
=$pid
1729 if [[ $mailnn ]]; then
1730 if [[ $ns != "$mailnn" ]]; then
1731 echo "$p ns $ns != $mailnn"
1742 m sudo
-E env
"PATH=$PATH" nsenter
-t $
(pgrep
-f "/usr/sbin/openvpn .* --config /etc/openvpn/.*client.conf") -n -m "$@"
1745 vpncmd sudo
-E -u iank env
"PATH=$PATH" abrowser
-no-remote -P vpn
& r
1748 vpncmd sudo
-u iank env
"PATH=$PATH" abrowser
-no-remote -P vpn2
& r
1752 vpncmd sudo
-u iank env
"PATH=$PATH" "$@"
1760 if [[ -e /lib
/systemd
/system
/openvpn-client@.service
]]; then
1761 local vpn_service
=openvpn-client
1763 local vpn_service
=openvpn
1766 [[ $1 ]] ||
{ echo need arg
; return 1; }
1767 journalctl
--unit=$vpn_service@
$1 -f -n0 &
1768 # sometimes the journal doesnt open until after the vpn output
1769 # has happened. hoping this fixes that.
1771 sudo systemctl start
$vpn_service@
$1
1772 # sometimes the ask-password agent does not work and needs a delay.
1774 # https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=779240
1775 # noticed around 8-2017 after update from around stretch release
1776 # on debian testing, even though the bug is much older.
1777 sudo systemd-tty-ask-password-agent
1781 ls -lad /run
/user
/1000
1782 s
chmod 700 /run
/user
/1000; s chown iank.iank
/run
/user
/1000
1785 # systemctl is-enabled / status / cat says nothing, instead theres
1786 # some obscure symlink. paths copied from man systemd.unit.
1787 # possibly also usefull, but incomplete, doesnt show units not loaded in memory:
1788 # seru list-dependencies --reverse --all UNIT
1791 local -a dirs search
1797 ~
/.config
/systemd
/user.control
/*
1798 $XDG_RUNTIME_DIR/systemd
/user.control
/*
1799 $XDG_RUNTIME_DIR/systemd
/transient
/*
1800 $XDG_RUNTIME_DIR/systemd
/generator.early
/*
1801 ~
/.config
/systemd
/user
/*
1803 $XDG_RUNTIME_DIR/systemd
/user
/*
1805 $XDG_RUNTIME_DIR/systemd
/generator
/*
1806 ~
/.local
/share
/systemd
/user
/*
1807 /usr
/lib
/systemd
/user
/*
1808 $XDG_RUNTIME_DIR/systemd
/generator.late
/*
1813 /etc
/systemd
/system.control
/*
1814 /run
/systemd
/system.control
/*
1815 /run
/systemd
/transient
/*
1816 /run
/systemd
/generator.early
/*
1817 /etc
/systemd
/system
/*
1818 /etc
/systemd
/systemd.attached
/*
1819 /run
/systemd
/system
/*
1820 /run
/systemd
/systemd.attached
/*
1821 /run
/systemd
/generator
/*
1822 /lib
/systemd
/system
/*
1823 /run
/systemd
/generator.late
/*
1827 for f
in "${search[@]}"; do
1828 [[ -d $f ]] ||
continue
1835 # dirs is just so we write out the directory names, ls does it when there is 2 or more dirs.
1851 read _ link _ istls
< <(resolvectl dnsovertls tunfsf
)
1854 *) echo fixvpndns error
: unexpected istls value
: $istls >&2; return 1 ;;
1856 s busctl call org.freedesktop.resolve1
/org
/freedesktop
/resolve1 org.freedesktop.resolve1.Manager SetLinkDNSOverTLS is
$link no
1860 [[ $1 ]] ||
{ echo need arg
; return 1; }
1861 if [[ -e /lib
/systemd
/system
/openvpn-client@.service
]]; then
1862 local vpn_service
=openvpn-client
1864 local vpn_service
=openvpn
1866 sudo systemctl stop
$vpn_service@
$1
1868 vpnoffc
() { # vpn off client
1869 ser stop openvpn-client-tr@client
1872 ser start openvpn-client-tr@client
1876 vspicy
() { # usage: VIRSH_DOMAIN
1877 # connect to vms made with virt-install
1878 spicy
-p $
(sudo virsh dumpxml
"$1"|
grep "<graphics.*type='spice'"|\
1879 sed -r "s/.*port='([0-9]+).*/\1/")
1883 cat-new-files
/m
/4e
/INBOX
/new
1886 wtr
() { curl wttr.in
/boston
; }
1888 xevkb
() { xev
-event keyboard
; }
1893 printf "running: %s\n" "$*"
1897 f
=/a
/f
/ansible-configs
/files
/common
/etc
/fsf-workstation-bashrc.sh
1898 if [[ -e $f ]]; then
1899 # shellcheck disable=SC1090
1907 # we also have a file in /a/c/...konsole...
1908 local f
=$HOME/.config
/konsolerc
1909 setini DefaultProfile profileian.profile
"Desktop Entry" $f
1910 setini Favorites profileian.profile
"Favorite Profiles" $f
1911 setini ShowMenuBarByDefault false KonsoleWindow
$f
1912 setini TabBarPosition Top TabBar
$f
1916 while read -r k v
; do
1917 # shellcheck disable=SC2154
1918 setini
$k $v sakura
/a
/c
/subdir_files
/.config
/sakura
/sakura.conf
1920 colorset1_back rgb(33,37,39)
1924 disable_numbered_tabswitch true
1925 scroll_lines 10000000
1930 reset-xscreensaver
() {
1931 # except for spash, i set these by setting gui options in
1932 # xscreensaver-command -demo
1933 # then finding the corresponding option in .xscreensaver
1934 # spash, i happened to notice in .xscreensaver
1936 # dpmsOff, monitor doesnt come back on using old free software supported nvidia card
1937 cat > /home
/iank
/.xscreensaver
<<'EOF'
1940 dpmsStandby: 0:07:00
1941 dpmsSuspend: 0:08:00
1945 lockTimeout: 0:06:00
1952 # * stuff that makes sense to be at the end
1953 if [[ "$SUDOD" ]]; then
1954 # allow failure, for example if we are sudoing into a user with diffferent/lesser permissions.
1957 elif [[ -d /a
]] && [[ $PWD == "$HOME" ]] && [[ $
- == *i
* ]]; then
1964 # for mitmproxy to get a newer python.
1965 # commented until i want to use it because it
1966 # noticably slows bash startup
1970 if [[ $EUID == 0 ||
! -e ~
/.pyenv
/bin
]]; then
1971 echo "error: dont be root. make sure pyenv is installed"
1974 export PATH
="$HOME/.pyenv/bin:$PATH"
1975 eval "$(pyenv init -)"
1976 eval "$(pyenv virtualenv-init -)"
1980 export GOPATH
=$HOME/go
1981 path-add
$GOPATH/bin
1982 path-add
/usr
/local
/go
/bin
1984 # I have the git repo and a release. either one should work.
1985 # I have both because I was trying to solve an issue that
1986 # turned out to be unrelated.
1987 # ARDUINO_PATH=/a/opt/Arduino/build/linux/work
1988 export ARDUINO_PATH
=/a
/opt
/arduino-1.8
.15
1989 export KALEIDOSCOPE_DIR
=/a
/opt
/Kaleidoscope
1991 # They want to be added to the start, but i think
1992 # that should be avoided unless we really need it.
1993 path-add
--end ~
/.npm-global
1996 path-add
--end $HOME/.cargo
/bin
1998 if type -P rg
&>/dev
/null
; then
1999 # --no-messages because of annoying errors on broken symlinks
2000 rg
() { command rg
--no-messages -L -i -M 300 --no-ignore "$@" ||
return $?
; }
2001 #fails if not exist. ignore
2002 complete
-r rg
2>/dev
/null ||
:
2009 # taken from default changes to bashrc and bash_profile
2010 path-add
--end --ifexists $HOME/.rvm
/bin
2011 # also had ruby bin dir, but moved that to environment.sh
2012 # so its included in overall env
2015 export BASEFILE_DIR
=/a
/bin
/fai-basefiles
2017 #export ANDROID_HOME=/a/opt/android-home
2018 # https://f-droid.org/en/docs/Installing_the_Server_and_Repo_Tools/
2019 #export USE_SDK_WRAPPER=yes
2020 #PATH=$PATH:$ANDROID_HOME/tools:$ANDROID_HOME/platform-tools
2022 # didnt get drush working, if I did, this seems like the
2023 # only good thing to include for it.
2024 # Include Drush completion.
2025 # if [ -f "/home/ian/.drush/drush.complete.sh" ] ; then
2026 # source /home/ian/.drush/drush.complete.sh
2033 # https://wiki.archlinux.org/index.php/Xinitrc#Autostart_X_at_login
2034 # i added an extra condition as gentoo xorg guide says depending on
2035 # $DISPLAY is fragile.
2036 if [[ ! $DISPLAY && $XDG_VTNR == 1 ]] && shopt -q login_shell
&& isarch
; then
2041 # ensure no bad programs appending to this file will have an affect