2 # Copyright (C) 2019 Ian Kelling
3 # SPDX-License-Identifier: AGPL-3.0-or-later
4 # this gets sourced. shebang is just for file mode detection
11 source /a
/bin
/distro-setup
/path-add-function
13 # add this with absolute paths as needed for better security
14 #path-add --end /path/to/node_modules/.bin
16 # pip3 --user things go here:
17 path-add
--end ~
/.local
/bin
18 path-add
--ifexists --end /a
/work
/libremanage
19 path-add
--ifexists --end /a
/opt
/adt-bundle
*/tools
/a
/opt
/adt-bundle
*/platform-tools
20 path-add
--ifexists --end /a
/opt
/scancode-toolkit-3.10.
28 SL_SSH_ARGS
="-F $HOME/.ssh/confighome"
35 # generated instead of dynamic for the benefit of shellcheck
36 #for x in /a/bin/distro-functions/src/* /a/bin/!(githtml)/*-function?(s); do echo source $x ; done
37 source /a
/bin
/distro-functions
/src
/identify-distros
38 source /a
/bin
/log-quiet
/logq-function
39 # for x in /a/bin/bash_unpublished/source-!(.#*); do echo source $x; done
40 source /a
/bin
/bash_unpublished
/source-semi-priv
41 source /a
/bin
/bash_unpublished
/source-state
43 source /a
/bin
/log-quiet
/logq-function
44 if [[ -s /a
/opt
/alacritty
/extra
/completions
/alacritty.bash
]]; then
45 source /a
/opt
/alacritty
/extra
/completions
/alacritty.bash
54 sed '/^ *IdentityFile/d' ~
/.ssh
/config
>$d/config
55 s
command ssh -F $d/config
-i /q
/root
/h
"$@"
61 sed '/^ *IdentityFile/d' ~
/.ssh
/config
>$d/config
62 s rsync
-e "ssh -F $d/config -i /q/root/h" "$@"
70 if [[ $arg == [89]0Etiona
* ]]; then
72 rtime
=${arg#*Etiona} # remote time
73 if [[ ! $rtime ]]; then
76 dir
=/a
/opt
/emacs-trisquel
${v}-nox/.iank
77 ltime
=$
(stat
-c%Y
$dir/e
/e
/.emacs.d
/init.el
)
78 if (( ltime
> rtime
)); then
79 m rsync
-rptL --delete --filter=". /b/ds/sl/rsync-filter" $dir "$remote":/home
/iank
85 local f
=/home
/iank
/.emacs.d
/init.el
86 sl
--sl-test-cmd ". /etc/os-release ; printf %s \${VERSION//[^a-zA-Z0-9]/}; test -e $f && stat -c%Y $f" --sl-test-hook slemacs
"$@"
90 # Run this manually after .emacs.d changes. Otherwise, to check if
91 # files changed with find takes 90ms. sl normally only adds 25ms. We
92 # could cut it down to 10ms if we put things on a btrfs filesystem and
93 # looked for changes there, or used some inotify thing, but that seems
95 egh
() { # emacs gnuhope
96 RSYNC_RSH
=ssh m rsync
-rptL --delete --filter=". /b/ds/sl/rsync-filter" /a
/opt
/emacs-trisquel9-nox
/.iank lists2d.fsf.org
:.ianktrisquel_9
97 RSYNC_RSH
=ssh m rsync
-rptL --delete --filter=". /b/ds/sl/rsync-filter" /a
/opt
/emacs-trisquel8-nox
/.iank lists2d.fsf.org
:/home
/iank
100 local shell
="bash -s"
101 if [[ $HOSTNAME != kw
]]; then
102 shell
="ssh kw.office.fsf.org"
106 sudo mkdir /root/.ianktrisquel_9
107 sudo rsync -rptL --delete --filter=". /b/ds/sl/rsync-filter" /a/opt/emacs-trisquel9-nox/.iank /root/.ianktrisquel_9
108 rsync -rptL --delete --filter=". /b/ds/sl/rsync-filter" /a/opt/emacs-trisquel8-nox/.iank /home/iank
112 # usage mkschroot [-] distro codename packages
113 # - means no piping in of sources.list
116 while [[ $1 == -* ]]; do
118 -f) force
=true
; shift ;;
121 if [[ ! -s $sources ]]; then
122 echo mkschroot
: error
: sources
file $sources does not exist or is empty
133 repo
=http
://mirror.fsf.org
/trisquel
/
136 repo
=http
://archive.ubuntu.com
/ubuntu
/
139 repo
=http
://deb.debian.org
/debian
/
145 if ! $force && schroot
-l |
grep -xFq chroot
:$n; then
146 echo "$0: $n schroot already installed, skipping"
151 sd
/etc
/schroot
/chroot.d
/$n.conf
<<EOF
157 preserve-environment=true
161 if [[ ! -e $d/bin
]]; then
163 # resolvconf otherwise schroot fails with
164 # cp: not writing through dangling symlink '/var/run/schroot/mount/flidas-7a2362e0-81b3-4848-92c1-610203ef5976/etc/resolv.conf'
165 sudo debootstrap
--exclude=resolvconf
$n $d $repo
167 if [[ $sources ]]; then
168 sudo
install -m 644 $sources $d/etc
/apt
/sources.list
170 sudo chroot
$d apt-get update
171 sudo DEBIAN_FRONTEND
=noninteractive chroot
$d apt-get
-y dist-upgrade
--purge --auto-remove
172 sudo
cp -P {,$d}/etc
/localtime
173 if (( ${#apps[@]} )); then
174 sudo DEBIAN_FRONTEND
=noninteractive schroot
-c $n -- apt-get
install --allow-unauthenticated -y ${apps[@]}
179 # note: this is incomplete and untested.
180 # https://wiki.archlinux.org/index.php/Install_Arch_Linux_from_existing_Linux#Creating_a_chroot
183 mirror
=https
://mirrors.edge.kernel.org
/archlinux
/iso
/latest
/
184 tarball
=$
(curl
-s $mirror |
sed -nr 's/.*"(archlinux-bootstrap-.*-x86_64.tar.gz)".*/\1/p')
185 wget
-O /tmp
/arch.
tar.gz https
://mirrors.edge.kernel.org
/archlinux
/iso
/latest
/$tarball
186 s mkdir
-p /nocow
/schroot
/arch
187 cd _
/nocow
/schroot
/arch
188 s
sed -i '/## United States/,/^$/s,^#,,' etc
/pacman.d
/mirrorlist
189 # error: could not determine cachedir mount point /var/cache/pacman/pkg
190 s
sed -i /^CheckSpace
/d etc
/pacman.conf
191 chroot .
/bin
/bash
-s <<'EOF'
193 pacman-key --populate archlinux
196 # example of building an aur package:
197 # pacman -Sy base-devel wget
199 # f=$target/etc/sudoers
200 # line='iank ALL=(ALL) NOPASSWD: ALL'
201 # if [[ ! -e $f ]] || ! grep -xF "$line" $f; then
205 # wget https://aur.archlinux.org/cgit/aur.git/snapshot/anbox-image-gapps.tar.gz
206 # tar xzf anbox-image-gapps.tar.gz
207 # cd anbox-image-gapps
212 # clock back in to timetrack from last entry
214 sqlite3
/p
/.timetrap.db
"update entries set end = NULL where id = (select max(id) from entries);"
218 # s sshfs bu@$host:/bu/home/md /bu/mnt -o reconnect,ServerAliveInterval=20,ServerAliveCountMax=30 -o allow_other
221 enn
-M $
(exiqgrep
-i)
224 enn
-M $
(exiqgrep
-i|h1
)
229 /a
/f
/gnulib
/build-aux
/gnupload
"$@"
235 f
=(/p
/c
/firefox
*/compatibility.ini
)
236 if (( ${#f[@]} )); then
242 if shopt nullglob
>/dev
/null
; then
256 s checkrestart
-b /a
/bin
/ds
/checkrestart-blacklist
-pv
259 cp-blocked-domains-to-brains
() {
260 cp /a
/f
/ans
/roles
/exim
/files
/mx
/simple
/etc
/exim
4/bad-sender_domains
/a
/f
/brains
/sysadmin
/kb
/blocked_email_domains.mdwn
262 cp-blocked-domains-to-ansible
() {
263 cp /a
/f
/brains
/sysadmin
/kb
/blocked_email_domains.mdwn
/a
/f
/ans
/roles
/exim
/files
/mx
/simple
/etc
/exim
4/bad-sender_domains
268 # crashes on adding new cards in t9
269 schroot
-c buster
-- anki
274 hrcat
/m
/md
/alerts
/{cur
,new
}/*
277 ssh bk.b8.nz
"shopt -s nullglob; hrcat /m/md/INBOX/new/* /m/md/INBOX/cur/*"
281 rm -f /m
/md
/alerts
/{cur
,new
}/*
283 ssh bk.b8.nz
"shopt -s nullglob; rm -f /m/md/INBOX/new/* /m/md/INBOX/cur/*"
288 find /var
/local
/cron-errors
/home
/iank
/cron-errors
/sysd-mail-once-state
-type f
290 ralerts
() { # remote alerts
292 # this list is duplicated in check-remote-mailqs
293 for h
in bk je li frodo kwwg x3wg x2wg kdwg sywg
; do
296 if [[ $HOSTNAME == "${h%wg}" ]]; then
300 $shell find /var
/local
/cron-errors
/home
/iank
/cron-errors
/sysd-mail-once-state
-type f || ret
=$?
308 # pushd in case current directory has an ansible.cfg file
309 pushd /a
/xans
>/dev
/null
310 ansible-playbook
-v -l ${1:- $(hostname -f)} site.yml
314 pushd /a
/work
/ans
>/dev
/null
315 time ansible-playbook
-v -i inventory adhoc.yml
"$@"
319 pushd /a
/bin
/distro-setup
/a
>/dev
/null
320 ansible-playbook site.yml
"$@"
325 # googling android emulator libGL error: failed to load driver: r600
326 # lead to http://stackoverflow.com/a/36625175/14456
327 export ANDROID_EMULATOR_USE_SYSTEM_LIBS
=1
328 /a
/opt
/android-studio
/bin
/studio.sh
"$@" &r
;
331 # note, to check for glue records
332 # First, find some the .org nameservers:
333 # dig +trace iankelling.org
335 # dig ns1.iankelling.org @b0.org.afilias-nst.org.
337 # Now, compare for a domain that does have glue records setup (note the A
338 # and AAAA records in ADDITIONAL SECTION, those are glue records like the
339 # one I'm asking for):
341 # $ dig ns1.gnu.org @b0.org.afilias-nst.org.
343 # todo: make sm pull/push use systemd instead of the journal cat command
344 bbk
() { # btrbk wrapper
348 systemctl is-active btrbk.timer || active
=false
352 if [[ $
(systemctl is-active btrbk.service ||
:) != inactive
]]; then
353 echo "cron btrbk is already running"
354 if $active; then ser start btrbk.timer
; fi
359 # todo: consider changing this to srun and having the args come
360 # from a file like /etc/default/btrbk, like is done in exim
361 s jrun btrbk-run
"$@"
364 echo bbk
: WARNING
: btrbk.timer not restarted due to failure
366 ser start btrbk.timer
373 fai-monitor | pee
cat "fai-monitor-gui -"
376 bfg
() { java
-jar /a
/opt
/bfg-1.12
.14.jar
"$@"; }
379 xclock
-digital -update 1 -face 'arial black-80:bold'
382 nnn
() { /a
/opt
/nnn
-H "$@"; }
384 locat
() { # log-once cat
387 files
=(/var
/local
/cron-errors
/* /home
/iank
/cron-errors
/* /sysd-mail-once-state
/*)
401 # duplicated somewhat below.
402 jrun
() { # journal run. run args, log to journal, tail and grep the journal.
403 # Note, an alternative without systemd would be something like ts.
404 # Note, I tried using systemd-cat, but this seems obviously better,
405 # and that seemed to have a problem exiting during a systemctl daemon-reload
406 local cmd_name jr_pid s
410 if [[ $cmd != /* ]]; then
413 journalctl
-qn2 -f -u "$cmd_name" &
414 # Guess of time needed to avoid missing initial lines.
415 # .5 was not reliable. 1 was not reliable. 2 was not reliable
417 # We kill this in prompt-command for the case that we ctrl-c the
418 # systemd-cat. i dont know any way to trap ctrl-c and still run the
419 # normal action for it. There might be a way, unsure.
421 # note, we could have a version that does system --user, but if for example
422 # it does sudo ssh, that will leave a process around that we can't kill
423 # and it will leave the unit hanging around in a failed state needing manual
424 # killing of the process.
425 m s systemd-run
--uid $
(id
-u) --gid $
(id
-g) \
426 -E SSH_AUTH_SOCK
=/run
/openssh_agent \
427 --unit "$cmd_name" --wait --collect "$cmd" "${@:2}" || ret
=$?
428 # This justs lets the journal output its last line
429 # before the prompt comes up.
431 kill $jr_pid &>/dev
/null ||
:
435 # service run, and watch the output
440 journalctl
-qn2 -f -u $unit &
441 systemctl start
$unit
443 kill $jr_pid &>/dev
/null ||
:
452 keyhash
=$
(s ssh-keygen
-lf /root
/.ssh
/home |
awk '{print $2}')
453 tmp
=$
(s ssh-add
-l |
awk '$2 == "'$keyhash'"')
454 if [[ ! $tmp ]]; then
455 s ssh-add
/root
/.ssh
/home
458 s jrun switch-mail-host
"$@"
462 # shellcheck disable=SC2120
464 # note, i had --delete-excluded, but that deletes all files in --exclude-from on
465 # the remote site, which doesn't make sense, so not sure why i had it.
467 p
=(/a
/opt
/{emacs-debian11
{,-nox},mu
,emacs
} /a
/bin
/a
/exe
/a
/h
/a
/c
/p
/c
/machine_specific
/vps
{,.hosts
})
468 a
="-ahviSAXPH --specials --devices --delete --relative --exclude-from=/p/c/li-rsync-excludes"
470 for h
in li je bk
; do
471 m s rsync
"$@" $a ${p[@]} /p
/c
/machine_specific
/$h root@
$h.b8.nz
:/ || ret
=$?
472 # only li is debian11
473 p
[0]=/a
/opt
/emacs-ubuntu20.04
474 p
[1]=/a
/opt
/emacs-ubuntu20.04
-nox
476 m s rsync
"$@" -ahviSAXPH root@li.b8.nz
:/a
/h
/proposed-comments
/ /a
/h
/proposed-comments || ret
=$?
479 bkpush
() { # no emacs. for running faster.
480 p
=(/a
/bin
/a
/exe
/a
/h
/a
/c
/p
/c
/machine_specific
/vps
{,.hosts
})
481 a
="-ahviSAXPH --specials --devices --delete --relative --exclude-from=/p/c/li-rsync-excludes"
483 m rsync
"$@" $a ${p[@]} /p
/c
/machine_specific
/bk root@bk.b8.nz
:/ || ret
=$?
486 jepush
() { # no emacs. for running faster.
487 p
=(/a
/bin
/a
/exe
/a
/h
/a
/c
/p
/c
/machine_specific
/vps
{,.hosts
})
488 a
="-ahviSAXPH --specials --devices --delete --relative --exclude-from=/p/c/li-rsync-excludes"
490 m rsync
"$@" $a ${p[@]} /p
/c
/machine_specific
/je root@je.b8.nz
:/ || ret
=$?
495 dsign iankelling.org expertpathologyreview.com zroe.org amnimal.ninja
505 dsign iankelling.org expertpathologyreview.com zroe.org amnimal.ninja
521 local f
=/var
/lib
/bind
/db.b8.nz
524 sudo
install -m 644 -o bind -g bind /p
/c
/machine_specific
/vps
/bind-initial
/db.b8.nz
$f
528 # keys generated like this
529 # because of https://ftp.isc.org/isc/dnssec-guide/dnssec-guide.pdf
530 # https://blog.apnic.net/2019/05/23/how-to-deploying-dnssec-with-bind-and-ubuntu-server/
532 # key length is longer than that guide because
533 # we are using those at fsf and when old key lengths
534 # become insecure, I want some extra time to update.
538 dnssec-keygen
-a RSASHA256
-b 2048 $zone
539 dnssec-keygen
-f KSK
-a RSASHA256
-b 4096 $zone
540 for f
in K
$zone.
*.key
; do
541 # eg Kb8.nz.+008+47995.key tag=47995
542 # in dnsimple, you add the long string from this.
543 # in gandi, you add the long string from the .key file,
544 # then see that the digest matches the ds.
545 echo "tag is the number after DS"
546 dnssec-dsfromkey
-a SHA-256
$f
548 # For b8.nz, we let bind read the keys and sign, and
549 # right now they have root ownership, so let them
554 # create .signed file
555 # note: full paths probably not needed.
558 local zone
=${arg#db.}
559 local dir
=/p
/c
/machine_specific
/vps
/filesystem
/var
/lib
/bind
560 dnssec-signzone
-S -e +31536000 -o $zone -K $dir -d $dir $dir/db.
$zone
565 #### begin bitcoin related things
567 local f
=/etc
/bitcoin
/bitcoin.conf
568 # importprivkey will timeout if using the default of 15 mins.
569 # upped it to 1 hour.
570 bitcoin-cli
-rpcclienttimeout=60000 -$
(s
grep rpcuser
= $f) -$
(s
grep rpcpassword
= $f) "$@"
572 btcusd
() { # $1 btc in usd
574 price
="$(curl -s https://api.coinbase.com/v2/prices/BTC-USD/spot | jq -r .data.amount)"
575 printf "$%s\n" "$price"
577 printf "$%.2f\n" "$(echo "scale
=4; $price * $1"| bc -l)"
580 usdbtc
() { # $1 usd in btc
582 price
="$(curl -s https://api.coinbase.com/v2/prices/BTC-USD/spot | jq -r .data.amount)"
583 printf "$%s\n" "$price"
585 # 100 mil satoshi / btc. 8 digits after the 1.
586 printf "%.8f btc\n" "$(echo "scale
=10; $1 / $price "| bc -l)"
589 satoshi
() { # $1 satoshi in usd
591 price
="$(curl -s https://api.coinbase.com/v2/prices/BTC-USD/spot | jq -r .data.amount)"
592 price
=$
(echo "scale=10; $price * 0.00000001"|
bc -l)
593 printf "$%f\n" "$price"
595 printf "$%.2f\n" "$(echo "scale
=10; $price * $1"| bc -l)"
598 #### end bitcoin related things
602 cbfstool
() { /a
/opt
/coreboot
/build
/cbfstool
"$@"; }
608 cp /a
/bin
/data
/COPYING
"$@"
610 cp /a
/bin
/data
/COPYING .
617 cp /a
/bin
/data
/LICENSE
"$@"
619 cp /a
/bin
/data
/LICENSE .
624 if type -p chromium
&>/dev
/null
; then
628 cmd
="schroot -c bullseye chromium"
629 CHROMIUM_FLAGS
='--enable-remote-extensions' $cmd &r
635 # pipe to this, or just type like a shell
638 tee >(ssh frodo.b8.nz
) >(ssh x2
) >(ssh tp.b8.nz
) >(ssh kw
) >(ssh tp.b8.nz
)
642 for host in x2 kw tp.b8.nz x3.b8.nz frodo.b8.nz
; do
648 debian_pick_mirror
() {
649 # netselect-apt finds a fast mirror.
650 # but we need to replace the mirrors ourselves,
651 # because it doesnt do that. best it can do is
652 # output a basic sources file
653 # here we get the server it found, get the main server we use
654 # then substitute all instances of one for the other in the sources file
655 # and backup original to /etc/apt/sources.list-original.
656 # this is idempotent. the only way to identify debian sources is to
657 # note the original server, so we put it in a comment so we can
660 file=$
(mktemp
-d)/f
# safe way to get file name without creating one
661 sudo netselect-apt
-o "$file" ||
return 1
662 url
=$
(grep ^
\\w
$file |
head -n1 |
awk '{print $2}')
663 sudo
cp -f /etc
/apt
/sources.list
/etc
/apt
/sources.list-original
664 sudo
sed -ri "/http.us.debian.org/ s@( *[^ #]+ +)[^ ]+([^#]+).*@\1$url\2# http.us.debian.org@" /etc
/apt
/sources.list
668 digdiff @ns
{1,2}.iankelling.org
"$@"
672 "$@" |
& ts ||
return $?
682 /b
/ds
/distro-begin |
& ts ||
return $?
683 /b
/ds
/distro-end |
& ts ||
return $?
689 /b
/ds
/distro-begin |
& ts ||
return $?
695 /b
/ds
/distro-end |
& ts ||
return $?
708 envload
() { # load environment from a previous: export > file
709 local file=${1:-$HOME/.${USER}_env}
710 eval "$(export | sed 's/^declare -x/export -n/')"
711 while IFS
= read -r line
; do
712 # declare -x makes variables local to a function
713 eval ${line/#declare -x/export}
717 failfunc
() { asdf a b c
; }
718 failfunc2
() { failfunc d e f
; }
720 # one that comes with distros is too old for newer devices
722 /a
/opt
/android-platform-tools
/fastboot
"$@";
725 kdecd
() { /usr
/lib
/x86_64-linux-gnu
/libexec
/kdeconnectd
; }
727 # List of apps to install/update
728 # Create from existing manually installed apps by doing
730 # fdroidcl search -i, then manually removing
731 # automatically installed/preinstalled apps
734 # # my attempt at recovering from boot loop:
735 # # in that case, boot to recovery (volume up, home button, power, let go of power after samsun logo)
737 # mount /dev/block/mmcblk0p12 /data
739 # find -iname '*appname*'
741 # usually good enough to just rm -rf /data/app/APPNAME
744 # # causes replicant to crash
745 # org.quantumbadger.redreader
746 # org.kde.kdeconnect_tp
748 # not broke, but wont work without gps
749 #com.zoffcc.applications.zanavi
750 # not broke, but not using atm
751 #com.nutomic.syncthingandroid
752 # # doesn\'t work on replicant
753 #net.sourceforge.opencamera
756 net.mullvad.mullvadvpn
758 io.github.subhamtyagi.lastlauncher
760 com.biglybt.android.client
761 de.marmaro.krt.ffupdater
762 me.ccrama.redditslide
763 org.fedorahosted.freeotp
765 com.alaskalinuxuser.justnotes
766 com.artifex.mupdf.viewer.app
767 com.danielkim.soundrecorder
770 com.jmstudios.redmoon
772 org.kde.kdeconnect_tp
775 cz.martykan.forecastie
778 de.marmaro.krt.ffupdater
779 eu.siacs.conversations
781 im.vector.alpha
# riot
783 me.tripsit.tripmobile
785 net.minetest.minetest
790 org.smssecure.smssecure
792 sh.
ftp.rocketninelabs.meditationassistant.opensource
794 # https://forum.xda-developers.com/android/software-hacking/wip-selinux-capable-superuser-t3216394
799 local -A installed updated
801 # tried putting this in go buildscript cronjob,
802 # but it failed with undefined: os.UserCacheDir. I expect its due to
803 # an environment variable missing, but its easier just to stick it here.
804 m go get
-u mvdan.cc
/fdroidcl ||
return 1
806 if fdroidcl search
-u |
grep ^org.fdroid.fdroid
; then
807 fdroidcl
install org.fdroid.fdroid
811 for p
in $
(fdroidcl search
-i|
grep -o "^\S\+"); do
814 for p
in $
(fdroidcl search
-u|
grep -o "^\S\+"); do
817 for p
in ${fdroid_pkgs[@]}; do
818 if ! ${installed[$p]:-false}; then
819 m fdroidcl
install $p
820 # sleeps are just me being paranoid since replicant has a history of crashing when certain apps are installed
824 for p
in ${!installed[@]}; do
825 if ! ${updated[$p]:-true}; then
826 m fdroidcl
install $p
832 firefox-default-profile
() {
833 key
=Default value
=1 section
=$1
834 file=/p
/c
/subdir_files
/.mozilla
/firefox
/profiles.ini
835 sed -ri "/^ *$key/d" "$file"
836 sed -ri "/ *\[$section\]/,/^ *\[[^]]+\]/{/^\s*$key[[:space:]=]/d};/ *\[$section\]/a $key=$value" "$file"
838 fdhome
() { #firefox default home profile
839 firefox-default-profile Profile0
843 firefox-default-profile Profile4
847 if type -P firefox
&>/dev
/null
; then
855 firefox
-P alt
"$@" >/dev
/null
2>&1
861 local dname
="${PWD##*/}"
862 local m
="/a/tmp/$dname-missing"
863 local d
="/a/tmp/$dname-diff"
864 [[ -e $d ]] && rm "$d"
865 [[ -e $m ]] && rm "$m"
868 while read -r line
; do
870 if [[ -e "$fsfile" ]]; then
871 md5diff
"$line" "$fsfile" && tee -a "/a/tmp/$dname-diff" <<< "$fsfile $line"
877 done < <(find .
-type f
)
880 (( msize
<= 100 )) && cat $m
884 # expected output, with different tmp dirs
885 # /tmp/tmp.HDPbwMqdC9/c/d ./c/d
886 # /a/tmp/tmp.qLDkYxBYPM-missing
896 echo different
> $x/c
/d
901 # test whether missing files were renamed, generally for use with fsdiff
902 # $1 = fsdiff output file, $2 = directory to compare to. pwd = fsdiff dir
903 # echos non-renamed files
907 { sums
+=( "$(md5sum < "$x")" ) ; } 2>/dev
/null
909 while read -r line
; do
910 { missing_sum
=$
(md5sum < "$line") ; } 2>/dev
/null
912 for x
in "${sums[@]}"; do
913 if [[ $missing_sum == "$x" ]]; then
918 $renamed ||
echo "$line"
924 # F = fullscren, z = random, Z = auto zoom
925 command feh
-FzZ "$@"
931 firefox
-P default
"$@" >/dev
/null
2>&1
935 git config user.email ian@iankelling.org
938 # at least in flidas, things rely on gpg being gpg1
940 if type -P gpg2
&>/dev
/null
; then
948 local email
=ian@iankelling.org
949 git send-email
--notes "--envelope-sender=<$email>" \
950 --suppress-cc=self
"$@"
953 gup
() { /a
/f
/gnulib
/build-aux
/gnupload
"$@"; }
955 dejagnu
() { /a
/opt
/dejagnu
/dejagnu
"$@"; }
958 # do git status on published repos.
961 cd $
(readlink
-f $x)/..
962 status
=$
(i status
-s) ||
pwd
963 if [[ $status ]]; then
966 printf "%s\n" "$status"
976 for (( i
=0; i
<60; i
++ )); do
977 day
=$
( date +%F
-d @$
((now
- 86400*i
)) )
978 date "+%a %b %d" -d @$
((now
- 86400*i
)) |
tr '\n' ' '
979 /a
/opt
/timetrap
/bin
/t d
-ftotal -s $day -e $day all
-m '^w|lunch$'
982 to
() { t out
-a "$@"; }
983 ti
() { t
in -a "$@"; }
988 m t out
-a $
(date +%F.
%T
-d @$
(( $
(date -d "$(echo $*|sed 's/[_.]/ /g')" +%s
) + 60*45 )) )
992 arbttlog
() { arbtt-dump
"$@" |
grep -v '( )\|Current Desktop' |
sed -rn '/^[^ ]/{N;s/^(.{21})([0-9]*)[0-9]{3}m.*\(\*/\1\2/;s/^(.{21})[0-9]*.*\(\*/\1/;s/\n//;p}' ; }
995 /a
/opt
/idea-IC-163.7743
.44/bin
/idea.sh
"$@" &r
999 ssh root@iankelling.org
"cd /var/lib/znc/moddata/log/iank/freenode/ && hr && for x in \#$1/*; do base=\${x##*/}; files=(); for f in $@; do tmp=\#\$f/\$base; if [[ -e \$tmp ]]; then files+=(\#\$f/\$base); fi; done; sed \"s/^./\${base%log}/\" \${files[@]}|sort -n; hr; done"
1004 # use * instead of -r since that does sorted order
1005 ssh root@iankelling.org
"for n in freenode libera; do cd /var/lib/znc/moddata/log/iank/\$n/$chan && hr && for x in *; do echo \$x; sed \"s/^./\${x%log}/\" \$x; hr; done; done" |
less +G
1009 if type gio
&> /dev
/null
; then
1011 elif type gvfs-open
&> /dev
/null
; then
1016 # another alternative is run-mailcap
1021 # grep -Evi -e "^(\S+\s+){4}(sudo|sshd|cron)\[\S*:" \
1022 # -e "^(\S+\s+){4}systemd\[\S*: (starting|started) (btrfsmaintstop|dynamicipupdate|spamd dns bug fix cronjob|rss2email)\.*$"
1025 # journalctl -n 10000 -f "$@" | jfilter
1027 # jr() { journalctl "$@" | jfilter | less ; }
1028 # jrf() { journalctl -n 200 -f "$@" | jfilter; }
1030 jr
() { journalctl
"$@" ; }
1031 jrf
() { journalctl
-n 200 -f "$@" ; }
1034 ccomp journalctl jtail jr jrf
1036 kff
() { # keyboardio firmware flash
1037 pushd /a
/bin
/distro-setup
/Arduino
/Model01-Firmware
1038 yes $
'\n' |
make flash
1043 local umask_orig name
1044 if (( $# != 1 )); then
1045 e expected
1 arg
>&2
1051 wg genkey |
tee $name-priv.key | wg pubkey
> $name-pub.key
1055 if (( $# != 2 )); then
1056 e expected
2 arg of hostname
, ip suffix
>&2
1059 local host ipsuf umask_orig
1062 mkdir
-p /p
/c
/machine_specific
/$host/filesystem
/etc
/wireguard
1063 cd /p
/c
/machine_specific
/$host/filesystem
/etc
/wireguard
1066 wg genkey |
tee hole-priv.key | wg pubkey
> hole-pub.key
1067 cat >wghole.conf
<<EOF
1069 # contents hole-priv.key
1070 PrivateKey = $(cat hole-priv.key)
1072 Address = 10.8.0.$ipsuf/24
1073 # https://dev.to/tangramvision/what-they-don-t-tell-you-about-setting-up-a-wireguard-vpn-1h2g
1074 # ||: makes the systemd service not fail due to the failed command
1075 PostUp = ping -c1 10.8.0.1 ||:
1079 PublicKey = zePGl7LoS3iv6ziTI/k8BMh4L3iL3K2t9xJheMR4hQA=
1080 AllowedIPs = 10.8.0.0/24
1081 Endpoint = 72.14.176.105:1194
1082 PersistentKeepalive = 25
1085 # old approach. systemd seems to work fine and cleaner.
1086 rm -f ..
/network
/interfaces.d
/wghole
1087 cedit
-q $host /p
/c
/machine_specific
/li
/filesystem
/etc
/wireguard
/wghole.conf
<<EOF || [[ $? == 1 ]]
1089 PublicKey = $(cat hole-pub.key)
1090 AllowedIPs = 10.8.0.$ipsuf/32
1098 if [[ $1 == /* ]]; then
1100 if mountpoint
-q /mnt
/$base; then
1103 l
=$
(losetup
-j $1 |
sed -rn 's/^([^ ]+): .*/\1/p' |
head -n1 ||
:)
1105 l
=$
(sudo losetup
-f)
1106 m sudo losetup
$l $1
1108 if ! sudo cryptsetup status
/dev
/mapper
/$base &>/dev
/null
; then
1109 if ! sudo cryptsetup luksOpen
$l $base; then
1110 m sudo losetup
-d $l
1114 m sudo mkdir
-p /mnt
/$base
1115 m sudo mount
/dev
/mapper
/$base /mnt
/$base
1116 m sudo chown
$USER:$USER /mnt
/$base
1119 if mountpoint
/mnt
/$base &>/dev
/null
; then
1120 m sudo umount
/mnt
/$base
1122 if sudo cryptsetup status
/dev
/mapper
/$base &>/dev
/null
; then
1123 if ! m sudo cryptsetup luksClose
/dev
/mapper
/$base; then
1124 echo lom
: failed cryptsetup luksClose
/dev
/mapper
/$base
1128 l
=$
(losetup
-l --noheadings |
awk '$6 ~ /\/'$1'$/ {print $1}')
1130 m sudo losetup
-d $l
1132 echo lom
: warning
: no loopback device found
1137 # mu personality. for original, just run mp. for 2, run mp 2.
1138 # this is partly duplicated in mail-setup
1142 if ! killall mu
; then
1149 echo error
: mu not dead
1154 set -- /m
/mucache ~
/.cache
/mu
/m
/.mu ~
/.config
/mu
1159 if [[ -e $f && ! -L $f ]]; then
1162 m
ln -sf -T $target $f
1166 # these might need a mu index or something added.
1171 [[ -e $src ]] ||
{ echo "src:$src does not exist"; return 1; }
1173 m
ln -s -T $dst $src
1181 if [[ ! -e $src ||
-L $src ]]; then
1184 [[ -e $src ]] ||
{ echo "src:$src does not exist"; return 1; }
1186 m
ln -sf -T $dst $link
1194 [[ -e $src ]] ||
{ set +x
; return 1; }
1195 if [[ -L $dst ]]; then rm $dst; fi
1202 markdown
"$1" >/tmp
/mdtest.html
1203 firefox
/tmp
/mdtest.html
1206 mo
() { xset dpms force off
; } # monitor off
1209 mpv
--profile=d
"$@";
1212 mpv
--profile=s
"$@";
1220 d
=( /var
/lib
/znc
/moddata
/log
/iank
/{freenode
,libera
} )
1221 # use * instead of -r since that does sorted order
1222 ssh root@iankelling.org
"for f in ${d[@]}; do cd \$f/#$1; grep '\<iank.*' *; done" | cut
--complement -c12-16
1225 c
/p
/c
/.purple
/logs
/jabber
/iank@fsf.org
/office@conference.fsf.org.chat
1226 for x
in *.html
; do html2text
-o ${x%.html}.txt
$x; done;
1227 grep -A1 ') iank:' *.txt |
sed -r 's/^(.{10})[^ ]*\.txt:\(?([^ ]*)[[:space:]](..). iank:/\1_\2_\3/;s/^[^ ]*\.txt-//;/^--$/d;s/^[^ ]*\.txt:\((.{2}).(.{2}).(.{4}) (.{8}) (.{2})\)?/\3-\1-\2_\4_\5/' |
sed -n 'x;1d;0~2{G;s/\n/ /;p};${x;p}'
1231 d
=/var
/lib
/znc
/moddata
/log
/iank
/freenode
1232 ssh root@iankelling.org
"cd $d; find . -mtime -60 -type f -exec grep '\<iank.*' {} +" |
sed -r 's,^..([^/]*)/(.{11})(.{5})(.{8}).,\2\4 \1,' |
sort
1236 local now
time time_sec time_pretty
1238 sqlite3
-separator ' ' /p
/c
/subdir_files
/.local
/share
/gajim
/logs.db
"select time, message from logs where contact_name = 'iank' and jid_id = 17;" |
while read -r time l
; do
1243 if ! time_pretty
=$
(date +%F.
%R
-d @
$time); then
1244 echo bad
time: $time
1247 echo $time_pretty "$l"
1248 time_sec
=${time%%.*}
1249 # only look at the last 18 days. generally just use this for timesheet.
1250 if (( time_sec
< now
- 60 * 60 * 24 * 18 )); then break; fi
1255 sqlite3
-separator ' ' /p
/c
/subdir_files
/.local
/share
/gajim
/logs.db
"select time, message from logs" |
less
1259 e
"lspci -nnk|gr -iA2 net"
1260 lspci
-nnk|gr
-iA2 net
1262 e
"s lshw -C network"
1264 sudo lshw
-C network
1268 ser stop NetworkManager
1269 ser disable NetworkManager
1270 ser stop NetworkManager-wait-online.service
1271 ser disable NetworkManager-wait-online.service
1273 sudo resolvconf
-d NetworkManager
1279 ser start NetworkManager
1285 oathtool
--totp -b "$*" | xclip
-selection clipboard
1288 "$@" |
& pee
"xclip -r -selection clipboard"
1293 # from http://askubuntu.com/questions/456021/remove-vocals-from-mp3-and-get-only-instrumentals
1294 pactl load-module module-ladspa-sink sink_name
=Karaoke master
=alsa_output.usb-Audioengine_Audioengine_D1-00.analog-stereo plugin
=karaoke_1409 label
=karaoke control
=-30
1297 pfind
() { #find *$1* in $PATH
1298 [[ $# != 1 ]] && { echo requires
1 argument
; return 1; }
1300 IFS
=: pathArray
=($PATH); unset IFS
1301 find "${pathArray[@]}" -iname "*$1*"
1305 # trash-restore lists everything that has been trashed at or below CWD
1306 # This picks out files just in CWD, not subdirectories,
1307 # which also match grep $1, usually use $1 for a time string
1308 # which you get from running restore-trash once first
1311 # last condition is to not ask again for ones we skipped
1312 while name
="$( echo | restore-trash | gr "$PWD/[^
/]\
+$
" | gr "$1" )" \
1313 && [[ $name ]] && (( $
(wc -l <<<"$name") >= nth
)); do
1314 name
="$(echo "$name" | head -n $nth | tail -n 1 )"
1315 read -r -p "$name [Y/n] " ask
1316 if [[ ! $ask ||
$ask == [Yy
] ]]; then
1317 x
=$
( echo "$name" | gr
-o "^\s*[0-9]*" )
1318 echo $x | restore-trash
> /dev
/null
1319 elif [[ $ask == [Nn
] ]]; then
1329 rld
/a
/h
/_site
/ li
:/var
/www
/iankelling.org
/html
1334 # fixes the menu bar in xmonad. this won\'t be needed when xmonad
1335 # packages catches up on some changes in future (this is written in
1338 # geekosaur: so youll want to upgrade to xmonad 0.13 or else use a
1339 # locally modified XMonad.Hooks.ManageDocks that doesnt set the
1340 # work area; turns out it\'s impossible to set correctly if you are
1341 # not a fully EWMH compliant desktop environment
1343 # geekosaur: chrome shows one failure mode, qt/kde another, other
1344 # gtk apps a third, ... I came up with a setting that works for me
1345 # locally but apparently doesnt work for others, so we joined the
1346 # other tiling window managers in giving up on setting it at all
1348 xprop
-root -remove _NET_WORKAREA
1352 # reviewboard, used at my old job
1353 #rbpipe() { rbt post -o --diff-filename=- "$@"; }
1354 #rbp() { rbt post -o "$@"; }
1362 # only run on MAIL_HOST. simpler to keep this on one system.
1363 r2eadd
() { # usage: name url
1364 # initial setup of rss2email:
1365 # r2e new r2e@iankelling.org
1366 # that initializes files, and sets default email.
1367 # symlink to the config doesnt work, so I copied it to /p/c
1368 # and then use cli option to specify explicit path.
1369 # Only option changed from default config is to set
1372 # or else for a few feeds, the from address is set by the feed, and
1373 # if I fail delivery, then I send a bounce message to that from
1374 # address, which makes me be a spammer.
1376 r2e add
$1 "$2" $1@r2e.iankelling.org
1377 # get up to date and dont send old entries now:
1378 r2e run
--no-send $1
1380 r2e
() { command r2e
-d /p
/c
/rss2email.json
-c /p
/c
/rss2email.cfg
"$@"; }
1382 rspicy
() { # usage: HOST DOMAIN
1383 # connect to spice vm remote host. use vspicy for local host
1385 # shellcheck disable=SC2087
1387 sudo virsh dumpxml $2|grep "<graphics.*type='spice'" | \
1388 sed -rn "s/.*port='([0-9]+).*/\1/p"
1391 if [[ $port ]]; then
1392 spicy
-h $1 -p $port
1394 echo "error: no port found. check that the domain is running."
1400 # s gem install scss-lint
1401 pushd /a
/opt
/thoughtbot-guides
1404 scss-lint
-c /a
/opt
/thoughtbot-guides
/style
/sass
/.scss-lint.yml
"$@"
1408 sk
-e 2120,245 /b
/ds
/brc
/b
/ds
/brc2
1413 out
=${2:-${1%.*}.sh}
1415 script -t -c "mpv --no-config --no-resume-playback --no-terminal --no-audio-display '$1'" $tmp/typescript
2>$tmp/timing
1416 # todo, the current sleep seems pretty good, but it
1417 # would be nice to have an empirical measurement, or
1418 # some better wait to sync up.
1420 # note: --loop-file=no prevents it from hanging if you have that
1421 # set to inf the mpv config.
1422 # --loop=no prevents it from exit code 3 due to stdin if you
1423 # had it set to inf in mpv config.
1425 # args go to mpv, for example --volume=80, 50%
1426 cat >$out <<EOFOUTER
1428 trap "trap - TERM && kill 0" INT TERM ERR; set -e
1429 ( sleep .2; scriptreplay <( cat <<'EOF'
1433 $(cat $tmp/typescript)
1436 base64 -d - <<'EOF'| mpv --loop=no --loop-file=no --no-terminal --no-audio-display "\$@" -
1445 smeld
() { # ssh meld usage host1 host2 file
1446 meld
<(ssh $1 cat $3) <(ssh $2 cat $3)
1450 PATH
=/usr
/local
/spdhackfix
:$PATH command spd
"$@"
1454 sudo systemctl
suspend
1457 spamf
() { # spamtest on FILE
1458 local spamcpre spamdpid
1460 if (( $# != 1 )); then
1461 e spamtest error
: expected
1 arg
, filename
>&2
1465 spamdpid
=$
(systemctl status spamassassin|
sed -n '/^ *Main PID:/s/[^0-9]//gp')
1466 spamcpre
="nsenter -t $spamdpid -n -m"
1467 s
$spamcpre sudo
-u Debian-exim spamassassin
-t --cf='score PYZOR_CHECK 0' <"$1"
1473 declare -gi _seq
; _seq
+=1
1474 echo "test body" | m
mail -s "test mail from $HOSTNAME, $_seq" "${@:-root@localhost}"
1475 # for testing to send from an external address, you can do for example
1476 # -fian@iank.bid -aFrom:ian@iank.bid web-6fnbs@mail-tester.com
1477 # note in exim, you can retry a deferred message
1479 # MSG_ID is in /var/log/exim4/mainlog, looks like 1ccdnD-0001nh-EN
1482 # to test sieve, use below command. for fsf mail, see offlineimap-sync script
1483 # make modifications, then copy to live file, use -eW to actually modify mailbox
1485 # Another option is to use sieve-test SCRIPT MAIL_FILE. note,
1486 # sieve-test doesnt know about envelopes, Im not sure if sieve-filter does.
1488 # sieve with output filter. arg is mailbox, like INBOX.
1489 # This depends on dovecot conf, notably mail_location in /etc/dovecot/conf.d/10-mail.conf
1491 # always run this first, edit the test files, then run the following
1493 sieve-filter ~
/sieve
/maintest.sieve
${1:-INBOX} delete
2> >(head; tail) >/tmp
/testsieve.log
&& sed -rn '/^Performed actions:/,/^[^ ]/{/^ /p}' /tmp
/testsieve.log |
sort |
uniq -c
1496 c ~
/sieve
; cp personal
{test,}.sieve
; cp lists
{test,}.sieve
; cp personalend
{test,}.sieve
1497 sieve-filter
-eWv ~
/sieve
/maintest.sieve
${1:-INBOX} delete
&> /tmp
/testsieve.log
1498 sed -r '/^info: filtering:/{h;d};/^info: msgid=$/N;/^info: msgid=.*left message in mailbox [^ ]+$/d;/^info: msgid=/{H;g};/^info: message kept in source mailbox.$/d' /tmp
/testsieve.log
1503 # printf "subject\nbody\n" | alertme
1508 To: alerts@iankelling.org
1515 To: alerts@iankelling.org
1527 To: daylerts@iankelling.org
1534 To: daylerts@iankelling.org
1543 # alert when a page goes live. not urgent.
1546 tmpdir
="$(mktemp -d)"
1549 if torsocks wget
-q "$url"; then
1552 sleep 600 + $
(( RANDOM
% 300 ))
1559 # testmail above calls sendmail, which is a link to exim/postfix.
1560 # its docs dont say a way of adding an argument
1561 # to sendmail to turn on debug output. We could make a wrapper, but
1562 # that is a pain. Exim debug args are documented here:
1563 # http://www.exim.org/exim-html-current/doc/html/spec_html/ch-the_exim_command_line.html
1565 # http://www.exim.org/exim-html-current/doc/html/spec_html/ch-building_and_installing_exim.html
1566 # note, for exim daemon, you can turn on debug options by
1567 # adding -d, etc to COMMONOPTIONS in
1568 # /etc/default/exim4
1570 # to specify recipients other than those in to, cc, bcc, you can use the cli args, eg:
1571 # exim -t 'test@zroe.org, t2@zroe.org' <<'EOF'
1573 # -t = get recipient from header
1575 From: i@dmarctest.b8.nz
1576 To: mailman@dev.fsf.org
1578 Reply-to: rtest@iankelling.org
1580 This is a test message.
1587 # https://askubuntu.com/questions/160945/is-there-a-way-to-disable-a-laptops-internal-keyboard
1588 id
=$
(xinput
--list --id-only 'AT Translated Set 2 keyboard')
1589 if xinput list |
grep -F '∼ AT Translated Set 2 keyboard' &>/dev
/null
; then
1590 echo enabling keyboard
1591 # find the first slave keyboard number, they are all the same in my output.
1592 # if they werent, worst case we would need to save the slave number somewhere
1593 # when it got disabled.
1594 slave
=$
(xinput list |
sed -n 's/.*slave \+keyboard (\([0-9]*\)).*/\1/p' |
head -n1)
1595 xinput reattach
$id $slave
1604 (sleep $
(calc
"$* * 60") && mpv
--no-config --volume 50 /a
/bin
/data
/alarm.mp3
) > /dev
/null
2>&1 &
1607 trg
() { transmission-remote-gtk
& r
; }
1609 # example, set global upload limit to 100 kilobytes:
1611 TR_AUTH
=":$(jq -r .profiles[0].password ~/.config/transmission-remote-gtk/config.json)" transmission-remote transmission.lan
-ne "$@"
1618 for (( i
=0; i
< retries
- 1; i
++ )); do
1630 if [[ -e $1 && ! -w $1 ||
! -w $
(dirname "$1") ]]; then
1633 # full path for using in some initial setup steps
1640 ecmd
="/usr/sbin/exim4 -C /etc/exim4/my.conf"
1641 if ip a show veth1-mail
&>/dev
/null
; then
1645 pid
=$
(pgrep
-f "/usr/sbin/exim4 -bd -q30m -C /etc/exim4/my.conf"|h1
)
1646 m s nsenter
-t $pid -n -m $ecmd "$@"
1649 sdnbash
() { # systemd namespace bash
1651 m sudo nsenter
-t $
(systemctl show
--property MainPID
--value $unit') -n -m sudo -u $USER -i bash
1655 m sudo nsenter -t $(systemctl show --property MainPID --value mailnn') -n -m sudo
-u $USER -i bash
1659 m sudo nsenter
-t $
(pgrep
-f "/usr/sbin/openvpn .* --config /etc/openvpn/.*mail.conf") -n -m sudo
-u $USER -i bash
1662 m sudo nsenter
-t $
(pgrep
-f "/usr/sbin/exim4 -bd -q30m -C /etc/exim4/my.conf"|h1
) -n -m sudo
-u $USER -i bash
1666 spamdpid
=$
(systemctl show
--property MainPID
--value spamassassin
)
1667 m sudo nsenter
-t $spamdpid -n -m sudo
-u Debian-exim spamassassin
"$@"
1670 m sudo nsenter
-t $
(systemctl status unbound|
sed -n '/^ *Main PID:/s/[^0-9]//gp') -n -m sudo
-u $USER -i bash
1674 local p pid ns mailnn
1675 # mailvpn would belong on the list if using openvpn
1676 for p
in mailnn unbound dovecot spamassassin exim4 radicale
; do
1679 pid
=$
(ps
-eo pid
,cgroup |
grep /system.slice
/$p.service |
awk '{print $1}')
1682 pid
=$
(s systemctl show
--property MainPID
--value $p)
1686 if [[ ! $pid ]]; then
1687 echo failed to
find pid
for $p
1690 if ! ns
=$
(s readlink
/proc
/$pid/ns
/net
); then
1691 echo failed to
find ns
for $p pid
=$pid
1694 if [[ $mailnn ]]; then
1695 if [[ $ns != "$mailnn" ]]; then
1696 echo "$p ns $ns != $mailnn"
1707 m sudo
-E env
"PATH=$PATH" nsenter
-t $
(pgrep
-f "/usr/sbin/openvpn .* --config /etc/openvpn/.*client.conf") -n -m "$@"
1710 vpncmd sudo
-E -u iank env
"PATH=$PATH" abrowser
-no-remote -P vpn
& r
1713 vpncmd sudo
-u iank env
"PATH=$PATH" abrowser
-no-remote -P vpn2
& r
1717 vpncmd sudo
-u iank env
"PATH=$PATH" "$@"
1725 if [[ -e /lib
/systemd
/system
/openvpn-client@.service
]]; then
1726 local vpn_service
=openvpn-client
1728 local vpn_service
=openvpn
1731 [[ $1 ]] ||
{ echo need arg
; return 1; }
1732 journalctl
--unit=$vpn_service@
$1 -f -n0 &
1733 # sometimes the journal doesnt open until after the vpn output
1734 # has happened. hoping this fixes that.
1736 sudo systemctl start
$vpn_service@
$1
1737 # sometimes the ask-password agent does not work and needs a delay.
1739 # https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=779240
1740 # noticed around 8-2017 after update from around stretch release
1741 # on debian testing, even though the bug is much older.
1742 sudo systemd-tty-ask-password-agent
1745 # systemctl is-enabled / status / cat says nothing, instead theres
1746 # some obscure symlink. paths copied from man systemd.unit.
1747 # possibly also usefull, but incomplete, doesnt show units not loaded in memory:
1748 # seru list-dependencies --reverse --all UNIT
1751 local -a dirs search
1757 ~
/.config
/systemd
/user.control
/*
1758 $XDG_RUNTIME_DIR/systemd
/user.control
/*
1759 $XDG_RUNTIME_DIR/systemd
/transient
/*
1760 $XDG_RUNTIME_DIR/systemd
/generator.early
/*
1761 ~
/.config
/systemd
/user
/*
1763 $XDG_RUNTIME_DIR/systemd
/user
/*
1765 $XDG_RUNTIME_DIR/systemd
/generator
/*
1766 ~
/.local
/share
/systemd
/user
/*
1767 /usr
/lib
/systemd
/user
/*
1768 $XDG_RUNTIME_DIR/systemd
/generator.late
/*
1773 /etc
/systemd
/system.control
/*
1774 /run
/systemd
/system.control
/*
1775 /run
/systemd
/transient
/*
1776 /run
/systemd
/generator.early
/*
1777 /etc
/systemd
/system
/*
1778 /etc
/systemd
/systemd.attached
/*
1779 /run
/systemd
/system
/*
1780 /run
/systemd
/systemd.attached
/*
1781 /run
/systemd
/generator
/*
1782 /lib
/systemd
/system
/*
1783 /run
/systemd
/generator.late
/*
1787 for f
in "${search[@]}"; do
1788 [[ -d $f ]] ||
continue
1795 # dirs is just so we write out the directory names, ls does it when there is 2 or more dirs.
1811 read _ link _ istls
< <(resolvectl dnsovertls tunfsf
)
1814 *) echo fixvpndns error
: unexpected istls value
: $istls >&2; return 1 ;;
1816 s busctl call org.freedesktop.resolve1
/org
/freedesktop
/resolve1 org.freedesktop.resolve1.Manager SetLinkDNSOverTLS is
$link no
1820 [[ $1 ]] ||
{ echo need arg
; return 1; }
1821 if [[ -e /lib
/systemd
/system
/openvpn-client@.service
]]; then
1822 local vpn_service
=openvpn-client
1824 local vpn_service
=openvpn
1826 sudo systemctl stop
$vpn_service@
$1
1828 vpnoffc
() { # vpn off client
1829 ser stop openvpn-client-tr@client
1832 ser start openvpn-client-tr@client
1836 vspicy
() { # usage: VIRSH_DOMAIN
1837 # connect to vms made with virt-install
1838 spicy
-p $
(sudo virsh dumpxml
"$1"|
grep "<graphics.*type='spice'"|\
1839 sed -r "s/.*port='([0-9]+).*/\1/")
1843 cat-new-files
/m
/4e
/INBOX
/new
1846 wtr
() { curl wttr.in
/boston
; }
1848 xevkb
() { xev
-event keyboard
; }
1853 printf "running: %s\n" "$*"
1857 f
=/a
/f
/ansible-configs
/files
/common
/etc
/fsf-workstation-bashrc.sh
1858 if [[ -e $f ]]; then
1859 # shellcheck disable=SC1090
1867 # we also have a file in /a/c/...konsole...
1868 local f
=$HOME/.config
/konsolerc
1869 setini DefaultProfile profileian.profile
"Desktop Entry" $f
1870 setini Favorites profileian.profile
"Favorite Profiles" $f
1871 setini ShowMenuBarByDefault false KonsoleWindow
$f
1872 setini TabBarPosition Top TabBar
$f
1876 while read -r k v
; do
1877 # shellcheck disable=SC2154
1878 setini
$k $v sakura
/a
/c
/subdir_files
/.config
/sakura
/sakura.conf
1880 colorset1_back rgb(33,37,39)
1884 disable_numbered_tabswitch true
1885 scroll_lines 10000000
1890 reset-xscreensaver
() {
1891 # except for spash, i set these by setting gui options in
1892 # xscreensaver-command -demo
1893 # then finding the corresponding option in .xscreensaver
1894 # spash, i happened to notice in .xscreensaver
1896 # dpmsOff, monitor doesnt come back on using old free software supported nvidia card
1897 cat > /home
/iank
/.xscreensaver
<<'EOF'
1900 dpmsStandby: 0:07:00
1901 dpmsSuspend: 0:08:00
1905 lockTimeout: 0:06:00
1912 # * stuff that makes sense to be at the end
1913 if [[ "$SUDOD" ]]; then
1914 # allow failure, for example if we are sudoing into a user with diffferent/lesser permissions.
1917 elif [[ -d /a
]] && [[ $PWD == "$HOME" ]] && [[ $
- == *i
* ]]; then
1924 # for mitmproxy to get a newer python.
1925 # commented until i want to use it because it
1926 # noticably slows bash startup
1930 if [[ $EUID == 0 ||
! -e ~
/.pyenv
/bin
]]; then
1931 echo "error: dont be root. make sure pyenv is installed"
1934 export PATH
="$HOME/.pyenv/bin:$PATH"
1935 eval "$(pyenv init -)"
1936 eval "$(pyenv virtualenv-init -)"
1940 export GOPATH
=$HOME/go
1941 path-add
$GOPATH/bin
1942 path-add
/usr
/local
/go
/bin
1944 # I have the git repo and a release. either one should work.
1945 # I have both because I was trying to solve an issue that
1946 # turned out to be unrelated.
1947 # ARDUINO_PATH=/a/opt/Arduino/build/linux/work
1948 export ARDUINO_PATH
=/a
/opt
/arduino-1.8
.15
1949 export KALEIDOSCOPE_DIR
=/a
/opt
/Kaleidoscope
1951 # They want to be added to the start, but i think
1952 # that should be avoided unless we really need it.
1953 path-add
--end ~
/.npm-global
1956 path-add
--end $HOME/.cargo
/bin
1958 if type -P rg
&>/dev
/null
; then
1959 # --no-messages because of annoying errors on broken symlinks
1960 rg
() { command rg
--no-messages -L -i -M 300 --no-ignore "$@" ||
return $?
; }
1961 #fails if not exist. ignore
1962 complete
-r rg
2>/dev
/null ||
:
1969 # taken from default changes to bashrc and bash_profile
1970 path-add
--end --ifexists $HOME/.rvm
/bin
1971 # also had ruby bin dir, but moved that to environment.sh
1972 # so its included in overall env
1975 export BASEFILE_DIR
=/a
/bin
/fai-basefiles
1977 #export ANDROID_HOME=/a/opt/android-home
1978 # https://f-droid.org/en/docs/Installing_the_Server_and_Repo_Tools/
1979 #export USE_SDK_WRAPPER=yes
1980 #PATH=$PATH:$ANDROID_HOME/tools:$ANDROID_HOME/platform-tools
1982 # didnt get drush working, if I did, this seems like the
1983 # only good thing to include for it.
1984 # Include Drush completion.
1985 # if [ -f "/home/ian/.drush/drush.complete.sh" ] ; then
1986 # source /home/ian/.drush/drush.complete.sh
1993 # https://wiki.archlinux.org/index.php/Xinitrc#Autostart_X_at_login
1994 # i added an extra condition as gentoo xorg guide says depending on
1995 # $DISPLAY is fragile.
1996 if [[ ! $DISPLAY && $XDG_VTNR == 1 ]] && shopt -q login_shell
&& isarch
; then
2001 # ensure no bad programs appending to this file will have an affect