mkct() {
mkc $(mktemp -d)
}
+# mkdir the last arg, cp the rest into it
+mkcp() {
+ mkdir -p "${@: -1}"
+ cp "${@:1:$#-1}" "${@: -1}"
+}
+mkmv() {
+ mkdir -p "${@: -1}"
+ mv "${@:1:$#-1}" "${@: -1}"
+}
mkt() { # mkdir and touch file
local path="$1"
fi
}
+# prometheus node curl
+pnodecurl() {
+ local host
+ host=${1:-127.0.0.1}
+ s curl --cert-type PEM --cert /etc/prometheus/ssl/prometheus_cert.pem --key /etc/prometheus/ssl/prometheus_key.pem --cacert /etc/prometheus/ssl/prom_node_cert.pem --resolve prom_node:9100:$host -v https://prom_node:9100/metrics
+}
+
tx() { # toggle set -x, and the prompt so it doesnt spam
if [[ $- == *x* ]]; then
set +x
_spark_echo
}
+pdfwc() { local f; for f; do echo "$f" $(pdfinfo "$f" | awk '/^Pages:/ {print $2}'); done }
# * misc stuff
fi
case $input in
http*)
- path="$repo_dir/${input##https://$domain/wiki/}"
+ path="$repo_dir/${input##http*://$domain/wiki/}"
if [[ $path == */ ]]; then
path=${path%/}.mdwn
fi
;;
*)
path=$(fp "$input")
- url="https://$domain/wiki/${path#$repo_dir/}"
+ url="http*://$domain/wiki/${path#$repo_dir/}"
url="${url%.mdwn}/"
j echo "$url"
;;
esac
}
-# Convert brains file path to url and vice versa. It copies the result to clipboard
-# usage: brains [URL_OR_PATH]
-brains() {
- local url path input repo_dir err path
- repo_dir=/a/f/brains
- err=false
- if ! type -p xclip &>/dev/null; then
- echo "missing dependency for brains, please do: sudo apt install xclip" >&2
- err=true
- fi
- if ! type -p pee &>/dev/null; then
- echo "missing dependency for brains, please do: sudo apt install moreutils" >&2
- err=true
- fi
- if $err; then
- return 1
- fi
- if [[ $1 ]]; then
- input="$*"
- else
- read -r -p "enter path or url"$'\n' input
- fi
- case $input in
- http*)
- path="$repo_dir/${input##https://brains.fsf.org/wiki/}"
- if [[ $path == */ ]]; then
- path=${path%/}.mdwn
- fi
- printf "%s\n" "$path" |& pee "xclip -r -selection clipboard" cat
- ;;
- *)
- path=$(realpath -s "$input")
- url="https://brains.fsf.org/wiki/${path#$repo_dir/}"
- url="${url%.mdwn}/"
- echo "$url" |& pee "xclip -r -selection clipboard" cat
- ;;
- esac
-}
-
# Generate beet smartplaylists for navidrome.
# for going in the reverse direction, run
mkdir -p /tmp/b/s
for host in $remote $alt; do
- # this takes a while, we only want to do it on 1st run
- if [[ -s /tmp/b/$host.log ]]; then continue; fi
- ssh $host journalctl -u btrbk-run -u btrbk -u switch-mail-host -u btrbk-spread >/tmp/b/$host.log
+ h=$(ssh $host hostname)
+ rsync -a /var/log/btrbk $host:/var/log/btrbk /var/log/btrbk/$h
+ grr '\bsnapshot success' /var/log/btrbk/$h >/tmp/b/$h.log
+
+ ## this takes a while, we only want to do it on 1st run
+ # if [[ -s /tmp/b/$host.log ]]; then continue; fi
+ # ssh $host journalctl -u btrbk-run -u btrbk -u switch-mail-host -u btrbk-spread >/tmp/b/$host.log
done
- if [[ ! -s /tmp/b/local.log ]]; then
- jrbtrbk >/tmp/b/local.log
- fi
+ gr '\bsnapshot success' /var/log/btrbk/*.log >/tmp/b/local.log
cd /tmp/b
for f in *.log; do
gr '\bsnapshot success' $f >s/$f
# rg my main files
rgm() {
- rg "$@" /p/pd.org /p/w.org /a/t.org /a/work.org /b
+ rg "$@" /p/w.org /a/t.org /a/work.org /b
}
reset-konsole() {
# fine if they go back years.
log_path=/var/log/btrbk/$(date +%F_%T%:::z).log
echo copying output to $log_path
-exec &> >(tee -a $log_path)
+exec &> >(ts "%F %T" | tee -a $log_path)
if $verbose; then
if [[ $ret == 0 ]]; then
for tg in ${targets[@]}; do
+ h=$(ssh root@$tg hostname)
+ rsync -a /var/log/btrbk $tg:/var/log/btrbk/$tg
ssh root@$tg /usr/local/bin/mail-backup-clean
done
+ if [[ $source ]]; then
+ rsync -a $source:/var/log/btrbk /var/log/btrbk/$source
+ fi
fi
mexit $ret
fi
if [[ -e /p/c/user-specific ]]; then
if getent passwd prometheus &>/dev/null; then
- s rsync -clpgoDiSAX --chmod=Dg-s --chown=root:prometheus /p/c/user-specific/prometheus/prometheus-pass /etc
+ v s rsync -clpgoDiSAX --chmod=Dg-s --chown=root:prometheus /p/c/user-specific/prometheus/prometheus-pass /etc
+ v s rsync -clpgoDiSAX --chmod=Dg-s --chown=root:prometheus /p/c/user-specific/prometheus/prometheus/ssl/* /etc/prometheus/ssl
fi
if getent passwd www-data &>/dev/null; then
- s rsync -clpgoDiSAX --chmod=Dg-s --chown=root:www-data /p/c/user-specific/www-data/* /etc
+ v s rsync -clpgoDiSAX --chmod=Dg-s --chown=root:www-data /p/c/user-specific/www-data/* /etc
fi
fi
dnsb8
fi
- pi prometheus-node-exporter
- /a/bin/buildscripts/prom-node-exporter -l
+ s /c/roles/prom-export/files/simple/usr/local/bin/fsf-install-node-exporter -l
# ex for exporter
web-conf -p 9101 -f 9100 - apache2 ${HOSTNAME}ex.b8.nz <<'EOF'
-pi prometheus-node-exporter-collectors
case $HOSTNAME in
kd)
# Font awesome is needed for the alertmanager ui.
pi prometheus-alertmanager prometheus fonts-font-awesome
- /a/bin/buildscripts/prometheus
+ /c/roles/prom/files/simple/usr/local/bin/fsf-install-prometheus
web-conf -p 9091 -f 9090 - apache2 i.b8.nz <<'EOF'
<Location "/">
AuthType Basic
ser restart prometheus-alertmanager
fi
- /a/bin/buildscripts/prom-node-exporter -l
+ s /c/roles/prom-export/files/simple/usr/local/bin/fsf-install-node-exporter -l
for ser in prometheus-node-exporter prometheus-alertmanager prometheus; do
sysd-prom-fail-install $ser
;;
*)
- /a/bin/buildscripts/prom-node-exporter
+ s /c/roles/prom-export/files/simple/usr/local/bin/fsf-install-node-exporter
;;
esac
+++ /dev/null
-Package: prometheus-alertmanager prometheus prometheus-node-exporter libjs-jquery
-Pin: release n=bullseye,o=Debian
-Pin-Priority: 500
# iank: initial file from 2.24, added to empty ARGS.
-# overlapping-blocks is for backfil of recording rules,
-# https://jessicagreben.medium.com/prometheus-fill-in-data-for-new-recording-rules-30a14ccb8467
# config.file and tsdb.path are to configure the upstream version to use
# the default locations of the debian package.
-# Sets the command-line arguments to pass to the server.
+# Sets the command-line arguments to pass to the server. to see all options, run prometheus --help
ARGS="--web.listen-address=127.0.0.1:9090
--web.external-url=https://i.b8.nz:9091
--log.level=info
---storage.tsdb.allow-overlapping-blocks
--config.file=/etc/prometheus/prometheus.yml
--storage.tsdb.path=/var/lib/prometheus/metrics2/"
-
-
-# --config.file="prometheus.yml"
-# Prometheus configuration file path.
-# --web.listen-address="0.0.0.0:9090"
-# Address to listen on for UI, API, and telemetry.
-# --web.config.file="" [EXPERIMENTAL] Path to configuration file that can enable TLS or authentication.
-# --web.read-timeout=5m Maximum duration before timing out read of the request, and closing idle connections.
-# --web.max-connections=512 Maximum number of simultaneous connections.
-# --web.external-url=<URL> The URL under which Prometheus is externally reachable (for example, if Prometheus is served via a reverse proxy). Used for generating relative and absolute links back to
-# Prometheus itself. If the URL has a path portion, it will be used to prefix all HTTP endpoints served by Prometheus. If omitted, relevant URL components will be derived
-# automatically.
-# --web.route-prefix=<path> Prefix for the internal routes of web endpoints. Defaults to path of --web.external-url.
-# --web.user-assets=<path> Path to static asset directory, available at /user.
-# --web.enable-lifecycle Enable shutdown and reload via HTTP request.
-# --web.enable-admin-api Enable API endpoints for admin control actions.
-# --web.enable-remote-write-receiver
-# Enable API endpoint accepting remote write requests.
-# --web.console.templates="consoles"
-# Path to the console template directory, available at /consoles.
-# --web.console.libraries="console_libraries"
-# Path to the console library directory.
-# --web.page-title="Prometheus Time Series Collection and Processing Server"
-# Document title of Prometheus instance.
-# --web.cors.origin=".*" Regex for CORS origin. It is fully anchored. Example: 'https?://(domain1|domain2)\.com'
-# --storage.tsdb.path="data/"
-# Base path for metrics storage. Use with server mode only.
-# --storage.tsdb.retention=STORAGE.TSDB.RETENTION
-# [DEPRECATED] How long to retain samples in storage. This flag has been deprecated, use "storage.tsdb.retention.time" instead. Use with server mode only.
-# --storage.tsdb.retention.time=STORAGE.TSDB.RETENTION.TIME
-# How long to retain samples in storage. When this flag is set it overrides "storage.tsdb.retention". If neither this flag nor "storage.tsdb.retention" nor
-# "storage.tsdb.retention.size" is set, the retention time defaults to 15d. Units Supported: y, w, d, h, m, s, ms. Use with server mode only.
-# --storage.tsdb.retention.size=STORAGE.TSDB.RETENTION.SIZE
-# Maximum number of bytes that can be stored for blocks. A unit is required, supported units: B, KB, MB, GB, TB, PB, EB. Ex: "512MB". Based on powers-of-2, so 1KB is 1024B. Use
-# with server mode only.
-# --storage.tsdb.no-lockfile
-# Do not create lockfile in data directory. Use with server mode only.
-# --storage.tsdb.allow-overlapping-blocks
-# Allow overlapping blocks, which in turn enables vertical compaction and vertical query merge. Use with server mode only.
-# --storage.tsdb.head-chunks-write-queue-size=0
-# Size of the queue through which head chunks are written to the disk to be m-mapped, 0 disables the queue completely. Experimental. Use with server mode only.
-# --storage.agent.path="data-agent/"
-# Base path for metrics storage. Use with agent mode only.
-# --storage.agent.wal-compression
-# Compress the agent WAL. Use with agent mode only.
-# --storage.agent.retention.min-time=STORAGE.AGENT.RETENTION.MIN-TIME
-# Minimum age samples may be before being considered for deletion when the WAL is truncated Use with agent mode only.
-# --storage.agent.retention.max-time=STORAGE.AGENT.RETENTION.MAX-TIME
-# Maximum age samples may be before being forcibly deleted when the WAL is truncated Use with agent mode only.
-# --storage.agent.no-lockfile
-# Do not create lockfile in data directory. Use with agent mode only.
-# --storage.remote.flush-deadline=<duration>
-# How long to wait flushing sample on shutdown or config reload.
-# --storage.remote.read-sample-limit=5e7
-# Maximum overall number of samples to return via the remote read interface, in a single query. 0 means no limit. This limit is ignored for streamed response types. Use with
-# server mode only.
-# --storage.remote.read-concurrent-limit=10
-# Maximum number of concurrent remote read calls. 0 means no limit. Use with server mode only.
-# --storage.remote.read-max-bytes-in-frame=1048576
-# Maximum number of bytes in a single frame for streaming remote read response types before marshalling. Note that client might have limit on frame size as well. 1MB as
-# recommended by protobuf by default. Use with server mode only.
-# --rules.alert.for-outage-tolerance=1h
-# Max time to tolerate prometheus outage for restoring "for" state of alert. Use with server mode only.
-# --rules.alert.for-grace-period=10m
-# Minimum duration between alert and restored "for" state. This is maintained only for alerts with configured "for" time greater than grace period. Use with server mode only.
-# --rules.alert.resend-delay=1m
-# Minimum amount of time to wait before resending an alert to Alertmanager. Use with server mode only.
-# --alertmanager.notification-queue-capacity=10000
-# The capacity of the queue for pending Alertmanager notifications. Use with server mode only.
-# --query.lookback-delta=5m The maximum lookback duration for retrieving metrics during expression evaluations and federation. Use with server mode only.
-# --query.timeout=2m Maximum time a query may take before being aborted. Use with server mode only.
-# --query.max-concurrency=20
-# Maximum number of queries executed concurrently. Use with server mode only.
-# --query.max-samples=50000000
-# Maximum number of samples a single query can load into memory. Note that queries will fail if they try to load more samples than this into memory, so this also limits the
-# number of samples a query can return. Use with server mode only.
-# --enable-feature= ... Comma separated feature names to enable. Valid options: agent, exemplar-storage, expand-external-labels, memory-snapshot-on-shutdown, promql-at-modifier,
-# promql-negative-offset, remote-write-receiver (DEPRECATED), extra-scrape-metrics, new-service-discovery-manager. See https://prometheus.io/docs/prometheus/latest/feature_flags/
-# for more details.
-# --log.level=info Only log messages with the given severity or above. One of: [debug, info, warn, error]
-# --log.format=logfmt Output format of log messages. One of: [logfmt, json]
+# for testing
+#--query.lookback-delta=15s"
# Set the command-line arguments to pass to the server.
-# default:
-#ARGS=""
# from its README: If running Alertmanager in high availability mode is not
# desired, setting --cluster.listen-address= prevents Alertmanager from
# listening to incoming peer requests.
-# Why the fuck is that in the readme, not the docs below?
# If you don't add that, it will fail to start on boot because
# it doesn't wait for network.target, and gives this error message:
# component=cluster err="couldn't deduce an advertise address: no private IP found, explicit advertise addr not provided"
--storage.path=/var/lib/prometheus/alertmanager/
--web.listen-address=127.0.0.1:9093"
-# this file is from version 0.21
-
-# The alert manager supports the following options:
-
-
-# --config.file="alertmanager.yml"
-# Alertmanager configuration file name.
-# --storage.path="data/" Base path for data storage.
-# --data.retention=120h How long to keep data for.
-# --alerts.gc-interval=30m Interval between alert GC.
-# --web.external-url=WEB.EXTERNAL-URL
-# The URL under which Alertmanager is externally reachable (for
-# example, if Alertmanager is served via a reverse proxy). Used
-# for generating relative and absolute links back to
-# Alertmanager itself. If the URL has a path portion, it will
-# be used to prefix all HTTP endpoints served by Alertmanager.
-# If omitted, relevant URL components will be derived
-# automatically.
-# --web.route-prefix=WEB.ROUTE-PREFIX
-# Prefix for the internal routes of web endpoints. Defaults to
-# path of --web.external-url.
-# --web.listen-address=":9093"
-# Address to listen on for the web interface and API.
-# --web.get-concurrency=0 Maximum number of GET requests processed concurrently. If
-# negative or zero, the limit is GOMAXPROC or 8, whichever is
-# larger.
-# --web.timeout=0 Timeout for HTTP requests. If negative or zero, no timeout is
-# set.
-# --cluster.listen-address="0.0.0.0:9094"
-# Listen address for cluster. Set to empty string to disable HA
-# mode.
-# --cluster.advertise-address=CLUSTER.ADVERTISE-ADDRESS
-# Explicit address to advertise in cluster.
-# --cluster.peer=CLUSTER.PEER ...
-# Initial peers (may be repeated).
-# --cluster.peer-timeout=15s
-# Time to wait between peers to send notifications.
-# --cluster.gossip-interval=200ms
-# Interval between sending gossip messages. By lowering this
-# value (more frequent) gossip messages are propagated across
-# the cluster more quickly at the expense of increased
-# bandwidth.
-# --cluster.pushpull-interval=1m0s
-# Interval for gossip state syncs. Setting this interval lower
-# (more frequent) will increase convergence speeds across
-# larger clusters at the expense of increased bandwidth usage.
-# --cluster.tcp-timeout=10s Timeout for establishing a stream connection with a remote
-# node for a full state sync, and for stream read and write
-# operations.
-# --cluster.probe-timeout=500ms
-# Timeout to wait for an ack from a probed node before assuming
-# it is unhealthy. This should be set to 99-percentile of RTT
-# (round-trip time) on your network.
-# --cluster.probe-interval=1s
-# Interval between random node probes. Setting this lower (more
-# frequent) will cause the cluster to detect failed nodes more
-# quickly at the expense of increased bandwidth usage.
-# --cluster.settle-timeout=1m0s
-# Maximum time to wait for cluster connections to settle before
-# evaluating notifications.
-# --cluster.reconnect-interval=10s
-# Interval between attempting to reconnect to lost peers.
-# --cluster.reconnect-timeout=6h0m0s
-# Length of time to attempt to reconnect to a lost peer.
-# --log.level=info Only log messages with the given severity or above. One of:
-# [debug, info, warn, error]
-# --log.format=logfmt Output format of log messages. One of: [logfmt, json]
-# --version Show application version.
+# run with --help or see README for more options
{{ define "iank.default.description" }}
{{ if gt (len .Alerts.Firing) 0 -}}
-Alerts Firing:
+Firing:
{{ template "__text_alert_list" .Alerts.Firing }}
{{- end }}
{{ if gt (len .Alerts.Resolved) 0 -}}
-Alerts Resolved:
+Resolved:
{{ template "__text_alert_list" .Alerts.Resolved }}
{{- end }}
{{- end }}
-- targets:
- - kdwg:9101
- - sywg:9101
- - kwwg:9101
- - x3wg:9101
+-
+ targets:
+ - localhost:9100
+ - sywg:9100
+ - x3wg:9100
+
+# - kwwg:9100
# - x2wg:9101
# - frodo:9101
## for both.
# scrape_interval: 5s
# evaluation_interval: 5s
-
+ # and also useful
+ # /etc/default/prometheus
+# --query.lookback-delta=15s
+# the default lookback is 5 minutes, there is a way to change
+# it per query in the api with a QueryOpt option, but it isnt exposed in the web ui.
# Attach these labels to any time series or alerts when communicating with
# external systems (federation, remote storage, Alertmanager).
static_configs:
- targets: ['localhost:9090']
+ labels:
+ instance: 'kd'
- job_name: 'alertmanager'
static_configs:
- - targets: ['localhost:9093']
+ -
+ targets: ['localhost:9093']
+ labels:
+ instance: 'kd'
+
- job_name: simple_node
file_sd_configs:
- files:
- /etc/prometheus/file_sd/simple_node.yml
+
- job_name: node
- basic_auth:
- username: prom
- password_file: /etc/prometheus-pass
+ scheme: https
+ tls_config:
+ # Verifying remote identity
+ ca_file: /etc/prometheus/ssl/prom_node_cert.pem
+ server_name: prom_node
+ # Asserting our identity
+ cert_file: /etc/prometheus/ssl/prometheus_cert.pem
+ key_file: /etc/prometheus/ssl/prometheus_key.pem
file_sd_configs:
- files:
- /etc/prometheus/file_sd/node.yml
+ relabel_configs:
+ - source_labels: [__address__]
+ regex: "localhost:9100"
+ replacement: kd
+ target_label: instance
+ - source_labels: [__address__]
+ regex: "(.*)wg:.*"
+ # this is the default:
+ #replacement: "${1}"
+ target_label: instance
+
- job_name: tlsnode
scheme: https
basic_auth:
--- /dev/null
+#!/bin/bash
+
+# iank: fixed version of /usr/share/prometheus/alertmanager/generate-ui.sh, plus exit if already build
+set -e
+
+if [[ -e /usr/share/prometheus/alertmanager/ui/index.html ]]; then
+ exit 0
+fi
+
+
+ELMDISTURL=https://github.com/elm/compiler/releases/download/0.19.1/binary-for-linux-64-bit.gz
+SRCDIR=/usr/share/gocode/src/github.com/prometheus/alertmanager/ui/app
+DSTDIR=/usr/share/prometheus/alertmanager/ui
+
+echo "Installing dependencies..." >&2
+apt install libjs-bootstrap4 fonts-font-awesome curl uglifyjs \
+ golang-github-prometheus-alertmanager-dev
+
+#/usr/share/fonts-font-awesome/
+TMPDIR=$(mktemp -d)
+
+echo "Downloading Elm tools..." >&2
+cd $TMPDIR
+curl --location $ELMDISTURL | zcat >$TMPDIR/elm
+chmod +x $TMPDIR/elm
+
+echo "Compiling source code..." >&2
+ln -s $SRCDIR/src $SRCDIR/elm.json $TMPDIR
+(cd $TMPDIR; ./elm make src/Main.elm --optimize --output $TMPDIR/app.js)
+
+echo "Optimising source code..." >&2
+uglifyjs $TMPDIR/app.js \
+ --compress 'pure_funcs="F2,F3,F4,F5,F6,F7,F8,F9,A2,A3,A4,A5,A6,A7,A8,A9",pure_getters,keep_fargs=false,unsafe_comps,unsafe' \
+ --mangle --output $TMPDIR/script.js
+
+echo "Installing in Alertmanager directory..." >&2
+mkdir -p $DSTDIR
+mkdir -p $DSTDIR/lib
+cp $TMPDIR/script.js $DSTDIR
+cp $SRCDIR/index.html $SRCDIR/favicon.ico $DSTDIR
+ln -s /usr/share/fonts-font-awesome $DSTDIR/lib/font-awesome
+ln -s /usr/share/nodejs/bootstrap/dist $DSTDIR/lib/bootstrap4
+
+rm -rf $TMPDIR
+
+echo "Finished! Please, restart prometheus-alertmanager to activate UI." >&2
+++ /dev/null
-# Set the command-line arguments to pass to the server.
-# Due to shell scaping, to pass backslashes for regexes, you need to double
-# them (\\d for \d). If running under systemd, you need to double them again
-# (\\\\d to mean \d), and escape newlines too.
-ARGS="--web.listen-address=127.0.0.1:9100"
-
-# prometheus-node-exporter supports the following options:
-#
-# --collector.arp
-# Enable the arp collector (default: enabled).
-# --collector.bcache
-# Enable the bcache collector (default: enabled).
-# --collector.bcache.priorityStats
-# Expose expensive priority stats.
-# --collector.bonding
-# Enable the bonding collector (default: enabled).
-# --collector.btrfs
-# Enable the btrfs collector (default: enabled).
-# --collector.buddyinfo
-# Enable the buddyinfo collector (default: disabled).
-# --collector.conntrack
-# Enable the conntrack collector (default: enabled).
-# --collector.cpu
-# Enable the cpu collector (default: enabled).
-# --collector.cpu.info
-# Enables metric cpu_info.
-# --collector.cpu.info.bugs-include=COLLECTOR.CPU.INFO.BUGS-INCLUDE
-# Filter the `bugs` field in cpuInfo with a value that must be a regular
-# expression.
-# --collector.cpu.info.flags-include=COLLECTOR.CPU.INFO.FLAGS-INCLUDE
-# Filter the `flags` field in cpuInfo with a value that must be a regular
-# expression.
-# --collector.cpufreq
-# Enable the cpufreq collector (default: enabled).
-# --collector.disable-defaults
-# Set all collectors to disabled by default.
-# --collector.diskstats
-# Enable the diskstats collector (default: enabled).
-# --collector.diskstats.ignored-devices="^(ram|loop|fd|(h|s|v|xv)d[a-z]|nvme\\d+n\\d+p)\\d+$"
-# Regexp of devices to ignore for diskstats.
-# --collector.drbd
-# Enable the drbd collector (default: disabled).
-# --collector.edac
-# Enable the edac collector (default: enabled).
-# --collector.entropy
-# Enable the entropy collector (default: enabled).
-# --collector.fibrechannel
-# Enable the fibrechannel collector (default: enabled).
-# --collector.filefd
-# Enable the filefd collector (default: enabled).
-# --collector.filesystem
-# Enable the filesystem collector (default: enabled).
-# --collector.filesystem.ignored-fs-types="^(autofs|binfmt_misc|bpf|cgroup2?|configfs|debugfs|devpts|devtmpfs|fusectl|hugetlbfs|iso9660|mqueue|nsfs|overlay|proc|procfs|pstore|rpc_pipefs|securityfs|selinuxfs|squashfs|sysfs|tracefs)$"
-# Regexp of filesystem types to ignore for filesystem collector.
-# --collector.filesystem.ignored-mount-points="^/(dev|proc|run|sys|mnt|media|var/lib/docker/.+)($|/)"
-# Regexp of mount points to ignore for filesystem collector.
-# --collector.hwmon
-# Enable the hwmon collector (default: enabled).
-# --collector.infiniband
-# Enable the infiniband collector (default: enabled).
-# --collector.interrupts
-# Enable the interrupts collector (default: disabled).
-# --collector.ipvs
-# Enable the ipvs collector (default: enabled).
-# --collector.ipvs.backend-labels="local_address,local_port,remote_address,remote_port,proto,local_mark"
-# Comma separated list for IPVS backend stats labels.
-# --collector.ksmd
-# Enable the ksmd collector (default: disabled).
-# --collector.loadavg
-# Enable the loadavg collector (default: enabled).
-# --collector.logind
-# Enable the logind collector (default: disabled).
-# --collector.mdadm
-# Enable the mdadm collector (default: enabled).
-# --collector.meminfo
-# Enable the meminfo collector (default: enabled).
-# --collector.meminfo_numa
-# Enable the meminfo_numa collector (default: disabled).
-# --collector.mountstats
-# Enable the mountstats collector (default: disabled).
-# --collector.netclass
-# Enable the netclass collector (default: enabled).
-# --collector.netclass.ignored-devices="^$"
-# Regexp of net devices to ignore for netclass collector.
-# --collector.netdev
-# Enable the netdev collector (default: enabled).
-# --collector.netdev.device-exclude="^lo$"
-# Regexp of net devices to exclude (mutually exclusive to device-include).
-# --collector.netdev.device-include=COLLECTOR.NETDEV.DEVICE-INCLUDE
-# Regexp of net devices to include (mutually exclusive to device-exclude).
-# --collector.netstat
-# Enable the netstat collector (default: enabled).
-# --collector.netstat.fields="^(.*_(InErrors|InErrs)|Ip_Forwarding|Ip(6|Ext)_(InOctets|OutOctets)|Icmp6?_(InMsgs|OutMsgs)|TcpExt_(Listen.*|Syncookies.*|TCPSynRetrans)|Tcp_(ActiveOpens|InSegs|OutSegs|OutRsts|PassiveOpens|RetransSegs|CurrEstab)|Udp6?_(InDatagrams|OutDatagrams|NoPorts|RcvbufErrors|SndbufErrors))$"
-# Regexp of fields to return for netstat collector.
-# --collector.network_route
-# Enable the network_route collector (default: disabled).
-# --collector.nfs
-# Enable the nfs collector (default: enabled).
-# --collector.nfsd
-# Enable the nfsd collector (default: enabled).
-# --collector.ntp
-# Enable the ntp collector (default: disabled).
-# --collector.ntp.ip-ttl=1
-# IP TTL to use while sending NTP query.
-# --collector.ntp.local-offset-tolerance=1ms
-# Offset between local clock and local ntpd time to tolerate.
-# --collector.ntp.max-distance=3.46608s
-# Max accumulated distance to the root.
-# --collector.ntp.protocol-version=4
-# NTP protocol version.
-# --collector.ntp.server-is-local
-# Certify that collector.ntp.server address is not a public ntp server.
-# --collector.ntp.server="127.0.0.1"
-# NTP server to use for ntp collector.
-# --collector.perf
-# Enable the perf collector (default: disabled).
-# --collector.perf.cpus=""
-# List of CPUs from which perf metrics should be collected.
-# --collector.perf.tracepoint=COLLECTOR.PERF.TRACEPOINT...
-# Perf tracepoint that should be collected.
-# --collector.powersupply.ignored-supplies="^$"
-# Regexp of power supplies to ignore for powersupplyclass collector.
-# --collector.powersupplyclass
-# Enable the powersupplyclass collector (default: enabled).
-# --collector.pressure
-# Enable the pressure collector (default: enabled).
-# --collector.processes
-# Enable the processes collector (default: disabled).
-# --collector.qdisc
-# Enable the qdisc collector (default: disabled).
-# --collector.qdisc.fixtures=""
-# Test fixtures to use for qdisc collector end-to-end testing.
-# --collector.rapl
-# Enable the rapl collector (default: enabled).
-# --collector.runit
-# Enable the runit collector (default: disabled).
-# --collector.runit.servicedir="/etc/service"
-# Path to runit service directory.
-# --collector.schedstat
-# Enable the schedstat collector (default: enabled).
-# --collector.sockstat
-# Enable the sockstat collector (default: enabled).
-# --collector.softnet
-# Enable the softnet collector (default: enabled).
-# --collector.stat
-# Enable the stat collector (default: enabled).
-# --collector.supervisord
-# Enable the supervisord collector (default: disabled).
-# --collector.supervisord.url="http://localhost:9001/RPC2"
-# XML RPC endpoint.
-# --collector.systemd
-# Enable the systemd collector (default: enabled).
-# --collector.systemd.enable-restarts-metrics
-# Enables service unit metric service_restart_total.
-# --collector.systemd.enable-start-time-metrics
-# Enables service unit metric unit_start_time_seconds.
-# --collector.systemd.enable-task-metrics
-# Enables service unit tasks metrics unit_tasks_current and unit_tasks_max.
-# --collector.systemd.unit-exclude=".+\\.(automount|device|mount|scope|slice|target)"
-# Regexp of systemd units to exclude. Units must both match include and not
-# match exclude to be included.
-# --collector.systemd.unit-include=".+"
-# Regexp of systemd units to include. Units must both match include and not
-# match exclude to be included.
-# --collector.tcpstat
-# Enable the tcpstat collector (default: disabled).
-# --collector.textfile
-# Enable the textfile collector (default: enabled).
-# --collector.textfile.directory="/var/lib/prometheus/node-exporter"
-# Directory to read text files with metrics from.
-# --collector.thermal_zone
-# Enable the thermal_zone collector (default: enabled).
-# --collector.time
-# Enable the time collector (default: enabled).
-# --collector.timex
-# Enable the timex collector (default: enabled).
-# --collector.udp_queues
-# Enable the udp_queues collector (default: enabled).
-# --collector.uname
-# Enable the uname collector (default: enabled).
-# --collector.vmstat
-# Enable the vmstat collector (default: enabled).
-# --collector.vmstat.fields="^(oom_kill|pgpg|pswp|pg.*fault).*"
-# Regexp of fields to return for vmstat collector.
-# --collector.wifi
-# Enable the wifi collector (default: disabled).
-# --collector.wifi.fixtures=""
-# Test fixtures to use for wifi collector metrics.
-# --collector.xfs
-# Enable the xfs collector (default: enabled).
-# --collector.zfs
-# Enable the zfs collector (default: enabled).
-# --collector.zoneinfo
-# Enable the zoneinfo collector (default: disabled).
-# --log.format=logfmt
-# Output format of log messages. One of: [logfmt, json].
-# --log.level=info
-# Only log messages with the given severity or above. One of: [debug, info,
-# warn, error].
-# --path.procfs="/proc"
-# Procfs mountpoint.
-# --path.rootfs="/"
-# Rootfs mountpoint.
-# --path.sysfs="/sys"
-# Sysfs mountpoint.
-# --web.config=""
-# [EXPERIMENTAL] Path to config yaml file that can enable TLS or
-# authentication.
-# --web.disable-exporter-metrics
-# Exclude metrics about the exporter itself (promhttp_*, process_*, go_*).
-# --web.listen-address=":9100"
-# Address on which to expose metrics and web interface.
-# --web.max-requests=40
-# Maximum number of parallel scrape requests. Use 0 to disable.
-# --web.telemetry-path="/metrics"
-# Path under which to expose metrics.
--- /dev/null
+alertmanager.url: "http://localhost:9093"
+output: extended
iankelling.org / git / distro-setup / commitdiff