2 # Copyright (C) 2016 Ian Kelling
4 # This program is free software; you can redistribute it and/or
5 # modify it under the terms of the GNU General Public License
6 # as published by the Free Software Foundation; either version 2
7 # of the License, or (at your option) any later version.
9 # This program is distributed in the hope that it will be useful,
10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 # GNU General Public License for more details.
14 # You should have received a copy of the GNU General Public License
15 # along with this program; if not, write to the Free Software
16 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
19 trap 'echo "$0:$LINENO:error: \"$BASH_COMMAND\" returned $?" >&2' ERR
24 usage: ${0##*/} [-h] [-t 2|test] [-m WIRELESS_MAC]
25 setup my router in general: dhcp, dns, etc.
27 Type 2 or 3 is for setting up a backup device, there are two kinds so
28 that you can switch the main device to a backup, then a backup to the
29 main. Type test is for setting up a testing device.
31 Passing an empty string for WIRELESS_MAC will cause the device's native
46 while getopts hm
:t
: opt
; do
66 *) echo "$0: unexpected arg to -t: $*" >&2; usage
1 ;;
70 *) echo "$0: Internal error! unexpected args: $*" >&2 ; usage
1 ;;
73 shift "$((OPTIND-1))" # Discard the options and sentinel --
75 if [[ ! $mac ]] && ! $test; then
76 # if we wanted to increment it
77 #WIRELESSMAC=${WIRELESSMAC:0: -1}$((${WIRELESSMAC: -1} + 2))
81 if (( $# != 0 )); then
95 # background: upgrading all packages is not recommended because it
96 # doesn't go into the firmware. build new firmware if you want
97 # lots of upgrades. I think /tmp/opkg-lists is a pre openwrt 14 location.
99 if ! (( $
(date -r $f +%s
) + 60*60*24 > $
(date +%s
) )); then
100 if ! opkg update
; then
101 echo "$0: warning: opkg update failed" >&2
112 if [[ ! $
(opkg list-installed
"$pname") ]]; then
117 if [[ $to_install ]]; then
118 opkg
install ${to_install[@]}
127 ######### uci example:#######
128 # # https://wiki.openwrt.org/doc/uci
129 # wan_index=$(uci show firewall | sed -rn 's/firewall\.@zone\[([0-9])+\]\.name=wan/\1/p')
130 # wan="firewall.@zone[$wan_index]"
131 # if [[ $(uci get firewall.@forwarding[0].dest) != $forward_dest ]]; then
133 # v uci set firewall.@forwarding[0].dest=$forward_dest
134 # uci commit firewall
135 # firewall_restart=true
137 ####### end uci example #####
140 printf "+ uset %s\n" "$*"
143 local service
="${key%%.*}"
144 restart_var
=${service}_restart
145 if [[ ! ${!restart_var} ]]; then
146 eval $restart_var=false
148 if [[ $
(uci get
"$key") != "$val" ]]; then
149 v uci
set "$key"="$val"
151 eval $restart_var=true
158 ssid
="check out gnu.org"
168 passwd
-l root ||
: #already locked fails
170 sed -ibak '/^root:/d' /etc
/shadow
171 # /root/router created by manually running passwd then copying the resulting
172 # line. We have no mkpasswd on wrt/librecmc, then we scp it in.
173 cat /root
/router
>>/etc
/shadow
174 # otherwise, serial console gets root login with no password
175 uset system.@system
[0].ttylogin
1
178 cat >/usr
/bin
/archlike-pxe-mount
<<'EOFOUTER'
180 # symlinks are collapsed for nfs mount points, so use a bind mount.
181 # tried putting this in /etc/config/fstab,
182 # then doing block mount, it didn't work. This doesn't persist across reboots,
183 # todo: figure that out
185 for d in /run/{arch,parabola}iso/bootmnt; do
186 cat >>/etc/fstab <<EOF
187 /mnt/usb/tftpboot $d none bind 0 0
189 mount | grep $d &>/dev/null || mount $d
191 /etc/init.d/nfsd restart
193 chmod +x
/usr
/bin
/archlike-pxe-mount
195 sed -i '/^root:/s,/bin/ash$,/bin/bash,' /etc
/passwd
196 # usb, screen, relay are for libremanage
197 v pi kmod-usb-storage block-mount kmod-fs-ext4 nfs-kernel-server \
198 tcpdump openvpn-openssl adblock libusb-compat
/root
/relay_1.0
-1_mips_24kc.ipk \
199 screen kmod-usb-serial-cp210x kmod-usb-serial-ftdi
201 cat >/etc
/libremanage.conf
<<EOF
202 ${libremanage_host}_type=switch
203 ${libremanage_host}_channel=1
208 v
/etc
/init.d
/fstab
enable ||
:
210 # rebooting makes mounting work, but comparing lsmod,
211 # i'm guessing this will too. todo, test it.
212 # 255 == module already loaded
213 for mod
in scsi_mod sd_mod
; do v modprobe
$mod ||
[[ $?
== 255 ]]; done
215 # for archlike pxe. The default settings in the installer expect to find
216 # the NFS at one of these dirs
217 mkdir
-p /run
/archiso
/bootmnt
218 mkdir
-p /run
/parabolaiso
/bootmnt
220 # todo: at some later time, i found /mnt/usb not mounted, watch to see if
221 # that is the case after running this or rebooting.
222 # wiki says safe to do in case of fstab changes:
224 ## ian: usb broke on old router. if that happens, can just comment this to disable problems
225 # echo | cedit /etc/config/fstab ||:
226 v cedit
/etc
/config
/fstab
<<EOF || { v block umount; v block mount; }
227 config global automount
232 # /overlay is an / overlay mount for installing extra packages, etc.
233 # https://openwrt.org/docs/guide-user/additional-software/extroot_configuration
234 option target /mnt/usb
235 # option target /overlay
236 option device /dev/sda1
238 option options rw,async,noatime,nodiratime
243 # ian: disabled because afaik I don't need it, no benefit.
244 # config global autoswap
245 # option from_fstab 1
249 # option device /dev/sda1
255 # exportfs -ra wont cut it when its the same path, but now a bind mount
256 # todo: restart nfs when nfs is enabled?
257 #cedit /etc/exports <<EOF || v /etc/init.d/nfsd restart ||:
258 cedit
/etc
/exports
<<EOF ||:
259 /mnt/usb $lan/$cidr(rw,no_root_squash,insecure,sync,no_subtree_check)
261 /run/archiso/bootmnt $lan/$cidr(rw,no_root_squash,insecure,sync,no_subtree_check)
262 /run/parabolaiso/bootmnt $lan/$cidr(rw,no_root_squash,insecure,sync,no_subtree_check)
266 # todo: enable nfs when we need it only.
267 # v /etc/init.d/portmap start
268 # v /etc/init.d/nfsd start
269 # v /etc/init.d/portmap enable
270 # v /etc/init.d/nfsd enable
278 uset dropbear.@dropbear
[0].PasswordAuth
0
279 uset dropbear.@dropbear
[0].RootPasswordAuth
0
280 uset dropbear.@dropbear
[0].Port
2220
281 if ! cmp -s /root
/dropbear_rsa_host_key
/etc
/dropbear
/dropbear_rsa_host_key
; then
282 cp /root
/dropbear_rsa_host_key
/etc
/dropbear
/dropbear_rsa_host_key
283 dropbear_restart
=true
286 wireless_restart
=false
289 uset wireless.default_radio
$x.ssid
"$ssid"
290 uset wireless.default_radio
$x.key
$key
291 uset wireless.default_radio
$x.encryption psk2
293 uset wireless.default_radio
$x.macaddr
$macpre$
((macsuf
+ 2*x
))
295 # secondary device has wireless disabled
296 uset wireless.radio
$x.disabled
$dev2
299 if $wireless_restart; then
304 ########## openvpn exampl
305 ########## missing firewall settings for routing lan
307 # v /etc/init.d/openvpn start
308 # v /etc/init.d/openvpn enable
310 # # from https://wiki.openwrt.org/doc/uci/firewall
311 # # todo: not sure if /etc/init.d/network needs restarting.
312 # # I did, and I had to restart the vpn afterwards.
313 # # This maps a uci interface to a real interface which is
314 # # managed outside of uci.
315 # v cedit /etc/config/network <<'EOF' ||:
316 # config interface 'tun0'
317 # option ifname 'tun0'
318 # option proto 'none'
320 # v cedit /etc/config/openvpn <<'EOF' || v /etc/init.d/openvpn restart
321 # config openvpn my_client_config
323 # option config /etc/openvpn/client.conf
328 v cedit
/etc
/config
/network
<<EOF || v /etc/init.d/network reload
329 config 'route' 'transmission'
330 option 'interface' 'lan'
331 option 'target' '10.173.0.0'
332 option 'netmask' '255.255.0.0'
333 option 'gateway' '$l.3'
336 firewall_restart
=false
337 v cedit
/etc
/config
/firewall
<<EOF || firewall_restart=true
354 option src_dport 2222
361 option dest_port 2222
366 option dest_port 2220
383 option src_dport 1196
390 option dest_port 1196
407 option name syncthing
409 option src_dport 22001
415 option dest_port 22001
422 # note, using mac transform, we could allow all traffic to a host like this,
423 # replacing 1 as appropriate
424 #option dest_ip ::111:11ff:fe11:1111/::ffff:ffff:ffff:ffff
430 option name http-ipv6
438 option name https-ipv6
446 option name node-exporter
449 option dest_port 9101
454 option name mail587-ipv6
467 dnsmasq_restart
=false
468 v cedit
/etc
/hosts
<<EOF || dnsmasq_restart=true
477 $l.8 tp b8.nz faiserver
483 # netns creation looks for next free subnet starting at 10.173, but I only
484 # use one, and I would keep this one as the first created.
485 10.173.0.2 transmission
488 #mail_host=$(grep -F mail.iankelling.org /etc/hosts | awk '{print $1}')
489 # if [[ $mail_host ]]; then
490 # sed -i '/^$mail_host/a mail.iankelling.org' /etc/hosts
494 # avoid using the dns servers that my isp tells me about.
495 if [[ $
(uci get dhcp.@dnsmasq
[0].resolvfile
2>/dev
/null
) ]]; then
496 # default is '/tmp/resolv.conf.auto', we switch to the dnsmasq default of
497 # /etc/resolv.conf. not sure why I did this.
498 v uci delete dhcp.@dnsmasq
[0].resolvfile
503 uset dhcp.@dnsmasq
[0].domain b8.nz
504 uset dhcp.@dnsmasq
[0].
local /b8.nz
/
505 uset system.@system
[0].hostname
$hostname
507 if [[ $
(uci get adblock.global.adb_enabled
) != 1 ]]; then
508 v uci
set adblock.global.adb_enabled
=1
510 /etc
/init.d
/adblock restart
512 # https://github.com/openwrt/packages/tree/master/net/adblock/files
513 cat >/etc
/crontabs
/root
<<'EOF'
514 0 06 * * * /etc/init.d/adblock reload
518 # useful: http://wiki.openwrt.org/doc/howto/dhcp.dnsmasq
520 # sometimes /mnt/usb fails, cuz it's just a flash drive,
521 # so make sure we have this dir or else dnsmasq will fail
523 mkdir
-p /mnt
/usb
/tftpboot
524 v cedit
/etc
/dnsmasq.conf
<<EOF || dnsmasq_restart=true
525 server=/dmarctest.b8.nz/#
526 server=/_domainkey.b8.nz/#
527 server=/_dmarc.b8.nz/#
530 mx-host=b8.nz,mail.iankelling.org,10
531 txt-record=b8.nz,"v=spf1 a ?all"
534 # https://ret2got.wordpress.com/2018/01/19/how-your-ethereum-can-be-stolen-using-dns-rebinding/
537 # this says the ip of default gateway and dns server,
538 # but I think they are unneded and default
544 # results from googling around dnsmasq optimizations
545 # about 50k in memory. router has 62 megs.
546 # in a browsing session, I probably won't ever do 5000 lookups
547 # before the ttl expiration or whatever does expiration.
550 # ask all servers, use the one which responds first.
551 # http://ma.ttwagner.com/make-dns-fly-with-dnsmasq-all-servers/
554 # namebench benchmarks dns servers. google's dns was only
555 # slightly less fast than some others, and I trust it more
556 # to give accurate results, stay relatively fast, and
557 # not do anythin too malicious, so just use that.
558 # download namebench and run it like this:
559 # for x in all regional isp global preferred nearby; do ./namebench.py -s \$x -c US -i firefox -m weighted -J 10 -w; echo \$x; hr; done
563 server=2001:4860:4860::8888
564 server=2001:4860:4860::8844
567 # to fixup existin ips, on the client you can do
568 # sudo dhclient -r; sudo dhclient <interface-name>
570 # default dhcp range is 100-150
571 # bottom port, iPXE (PCI 03:00.0) in seabios boot menu
572 dhcp-host=c8:60:00:31:6b:75,set:kd,$l.2,kd
573 # top port, iPXE (PCI 04:00.0) in seabios boot menu
574 #dhcp-host=c8:60:00:2b:15:07,set:kd,$l.2,kd
575 dhcp-host=00:26:18:97:bb:16,set:frodo,$l.3,frodo
576 # 4 is reserved for a staticly configured host.
577 dhcp-host=00:1f:16:16:39:24,set:x2,$l.5,x2
578 # This is so fai can have an explicit name to use for testing,
579 # or else any random machine which did a pxe boot would get
580 # reformatted. The mac is from doing a virt-install, cancelling it,
581 # and copying the generated mac, so it should be randomish.
582 dhcp-host=52:54:00:9c:ef:ad,set:demohost,$l.6,demohost
583 dhcp-host=00:1f:16:14:01:d8,set:tp,$l.7,x3
584 dhcp-host=80:fa:5b:1c:6e:cf,set:tp,$l.8,tp
587 dhcp-host=52:54:00:56:09:f9,set:faiserver,$l.15,faiserver
589 # This is the ip it picks by default if dhcp fails,
590 # so might as well use it.
591 # hostname is the name it uses according to telnet
592 dhcp-host=b4:75:0e:94:29:ca,set:switch9429ca,$l.251,switch9429ca
597 # Just leave the tftp server up even if we aren't doing pxe boot.
598 # It has no sensitive info.
600 tftp-root=/mnt/usb/tftpboot
603 uset network.lan.ipaddr
$l.
$lanip
604 uset network.lan.netmask
$mask
605 uset dhcp.wan.ignore
$dev2 # default is false
606 uset dhcp.lan.ignore
$dev2 # default is false
608 uset network.lan.gateway
$l.1
609 uset network.wan.proto none
610 uset network.wan6.proto none
612 # these are the defaults
613 uset network.lan.gateway
''
614 uset network.wan.proto dhcp
615 uset network.wan6.proto dhcpv6
619 if $dnsmasq_restart; then
620 v
/etc
/init.d
/dnsmasq restart
623 if $firewall_restart; then
624 v
/etc
/init.d
/firewall restart
629 if $network_restart; then
632 if $dropbear_restart; then
633 v
/etc
/init.d
/dropbear restart