3 # Copyright (C) 2019 Ian Kelling
4 # SPDX-License-Identifier: AGPL-3.0-or-later
7 # todo: setup an alert for bouncing test emails.
9 # todo: bounces to my fsf mail can come from fsf@iankelling.org,
10 # think about making bounces go from the original address.
12 # todo: add a prometheus alert for dovecot.
14 # todo: handle errors like this:
15 # Mar 02 12:44:26 kw systemd[1]: exim4.service: Found left-over process 68210 (exim4) in control group while starting unit. Ignoring.
16 # Mar 02 12:44:26 kw systemd[1]: This usually indicates unclean termination of a previous run, or service implementation deficiencies.
17 #eg: on eggs, on may 1st, ps grep for exim, 2 daemons running. 1 leftover from a month ago
18 #Debian-+ 1954 1 0 36231 11560 4 Apr02 ? 00:40:25 /usr/sbin/exim4 -bd -q30m
19 #Debian-+ 23058 1954 0 36821 10564 0 20:38 ? 00:00:00 /usr/sbin/exim4 -bd -q30m
21 # todo: harden dovecot. need to do some research. one way is for it to only listen on a wireguard vpn interface, so only clients that are on the vpn can access it.
22 # todo: consider hardening cups listening on 0.0.0.0
23 # todo: stop/disable local apache, and rpc.mountd, and kdeconnect when not in use.
25 # todo: hosts should only allow external mail that is authed and
26 # destined for backup route. it is a minor issue since traffic is
27 # limited to the wghole network.
29 # todo: emailing info@amnimal.ninja produces a bounce, user doesn't exist
30 # instead of a simple rejection like it should.
32 # todo: run mailping test after running, or otherwise
33 # clear out terminal alert
35 # todo: disable postgrey
37 # todo: in testforward-check, we should also look
39 # todo: test that bounces dont help create valid mailtest-check
41 # todo: move mail stuff in distro-end into this file
43 # todo: consider rotating dkim & publishing key so every past email I sent
44 # isnt necessarily signed
46 # todo: consider how to get clamav out of Debian-exim group
47 # so it cant read/write the whole mail spool, for better
50 # todo: create a cronjob to update or warn on expiring dnssec keys
52 # todo: we should test failed mail daily or so
53 # failed cronjob, failed sysd-log-once,
54 # a local bounce from a cronjob, a local bounce
55 # to a bad remote address, perhaps a local failure
56 # when the sending daemon is down.
57 # And send an alert email if no alerts have been sent
58 # in 2 or 3 days or something. todo, test cron mail on li.
60 # todo: look at mailinabox extra dns records, note these changelogs:
61 # - An MTA-STS policy for incoming mail is now published (in DNS and over HTTPS) when the primary hostname and email address domain both have a signed TLS certificate installed, allowing senders to know that an encrypted connection should be enforced.
62 # - The per-IP connection limit to the IMAP server has been doubled to allow more devices to connect at once, especially with multiple users behind a NAT.
65 # todo: mailtest-check failure on remote hosts is not going to alert me.
67 # todo: test mail failure as well as success.
69 # todo: validate that mailtest-check is doing dnsbl checks.
71 # background: I want to run exim in a network namespace so it can send
72 # and receive through a vpn. This is needed so it can do ipv6, because
73 # outside the namespace if we dont have ipv6, to send ipv6 through the
74 # vpn, we have to send all our ipv6 through the vpn. I did this for a
75 # long time, it was fine, but it causes various pains, like increased
76 # latency, increased recaptcha because my ip is from a data center, just
77 # various issues I dont want on all the time. The problem with the
78 # namespace is that all kinds of programs want to invoke exim, but they
79 # wont be in the namespace. I could replace exim with a wrapper that
80 # jumps into the namespace, i tried that, it works fine. One remaining
81 # problem was that I would have needed to hook into exim upgrades to
82 # move exim and replace it with my wrapper script. Also, my script to
83 # join the namespace is not super reliable because it uses a pgrep.
84 # Instead, I should have created a systemd service for a process that
85 # will never die and just writes its pid somewhere convenient.
90 # user ALL=(ALL) /usr/sbin/exim4
92 # move exim4 to eximian, use this script for exim4:
95 # if ip a show veth1-mail &>/dev/null; then
96 # /usr/sbin/eximian "$@"
100 # if [[ $USER && $USER != root ]]; then
103 # pid=$(pgrep -f "/usr/sbin/openvpn .* --config /etc/openvpn/.*mail.conf")
105 # sudo nsenter -t $pid -n -m sudo -u $USER /usr/sbin/eximian "$@"
107 # nsenter -t $pid -n -m /usr/sbin/eximian "$@"
111 # an alternate solution: there is a small setguid program for
112 # network namespaces in my bookmarks.
114 # However, the solution I went with is: have 2 exim
115 # configs. A nonstandard location for the daemon that runs
116 # in the namespace. For all other invocations, it uses
117 # the default config location, which is altered to be
118 # in a smarthost config which sends mail to the deaemon.
120 # I have a bash function, enn to invoke exim like the daemon is running.
121 # and mailbash to just enter its network namespace.
123 if [ -z "$BASH_VERSION" ]; then echo "error: shell is not bash" >&2; exit 1; fi
127 if [[ -s /usr
/local
/lib
/err
]]; then
128 source /usr
/local
/lib
/err
129 elif [[ -s /a
/bin
/errhandle
/err
]]; then
130 source /a
/bin
/errhandle
/err
132 err
"no err tracing script found"
134 source /a
/bin
/distro-functions
/src
/identify-distros
135 source /a
/bin
/distro-functions
/src
/package-manager-abstractions
137 # has nextcloud_admin_pass in it
138 f
=/p
/c
/machine_specific
/$HOSTNAME/mail
140 # shellcheck source=/p/c/machine_specific/bk/mail
145 [[ $EUID == 0 ]] ||
exec sudo
-E "${BASH_SOURCE[0]}" "$@"
147 # note, this is hardcoded in /etc/exim4/conf.d/main/000_local
153 Usage: ${0##*/} anything_here_to_debug
154 Setup exim4 & dovecot & related things
156 -h|--help Print help and exit.
161 # debug output if we pass any arg
167 ####### instructions for icedove #####
168 # Incoming mail server: mail.iankelling.org, port 143, username iank, connection security starttls, authentication method normal password,
169 # then click advanced so it accepts it.
170 # we could also just use 127.0.0.1 with no ssl
172 # hamburger -> preferences -> preferences -> advanced tab -> config editor button -> security.ssl.enable_ocsp_must_staple = false
173 # background: dovecot does not yet have ocsp stapling support
174 # reference: https://community.letsencrypt.org/t/simple-guide-using-lets-encrypt-ssl-certs-with-dovecot/2921
176 # for phone, k9mail, fdroid, same thing but username alerts, pass in ivy-pass.
177 # also, bk.b8.nz for secondary alerts, username is iank. same alerts pass.
178 # fetching mail settings: folder poll frequency 10 minutes.
179 # account settings, fetching mail, push folders: All. Then disable the persistent notification.
183 # * perstent password instructions
184 # Note: for cert cron, we need to manually run first to accept known_hosts
187 # # for hosts which have all private files I just use the same user
188 # # for other hosts, each one get\'s their own password.
189 # # for generating secure pass, and storing for server too:
192 # apg -m 50 -x 70 -n 1 -a 1 -M CLN >$f
193 # s sed -i "/^$host:/d" /p/c/filesystem/etc/exim4/passwd
194 # echo "$host:$(mkpasswd -m sha-512 -s <$f)" >>/p/c/filesystem/etc/exim4/passwd
195 # #reference: exim4_passwd_client(5)
196 # dir=/p/c/machine_specific/$host/filesystem/etc/exim4
198 # echo "mail.iankelling.org:$host:$(<$f)" > $dir/passwd.client
199 # # then run this script
201 # # dovecot password, i just need 1 as I\'m the only user
202 # mkdir /p/c/filesystem/etc/dovecot
203 # echo "iank:$(doveadm pw -s SHA512-CRYPT)::::::" >>/p/c/filesystem/etc/dovecot/users
205 ####### end perstent password instructions ######
209 # # Remove 1 level of comments in this section, set the domain var
210 # # for the domain you are setting up, then run this and copy dns settings
212 # domain=iankelling.org
213 # c /p/c/filesystem/etc/exim4
214 # # this has several bugs addressed in comments, but it was helpful
215 # # https://debian-administration.org/article/718/DKIM-signing_outgoing_mail_with_exim4
217 # openssl genrsa -out $domain-private.pem 2048
218 # # Then, to get the public key strings to put in bind:
220 # # selector is needed for having multiple keys for one domain.
221 # # I dun do that, so just use a static one: li
222 # # Debadmin page does not have v=, fastmail does, and this
223 # # says it\'s recommended in 3.6.1, default is DKIM1 anyways.
224 # # https://www.ietf.org/rfc/rfc6376.txt
225 # # Join and print all but first and last line.
226 # # last line: swap hold & pattern, remove newlines, print.
227 # # lines 2+: append to hold space
228 # echo "bind txt record: remember to truncate $domain so its relative to the bind zone"
230 # a._domainkey.$domain TXT (
231 # "v=DKIM1\059 k=rsa\059 p=$(openssl rsa -in $domain-private.pem -pubout |&sed -rn '${x;s/\n//g;s/^(.*)(.{240}$)/\1"\n"\2/p};3,$H')" )
233 # # sed explanation: skip the first few lines, then put them into the hold space, then
234 # # on the last line, back to the patern space, remove the newlines, then add a newline
235 # # at the last char - 240, because bind txt records need strings <=255 chars,
236 # # other dkim stuff at the begining is is 25 chars, and the pubkey is 393, so this
237 # # leaves us a bit of extra room at the end and a bunch at the beginning.
239 # # selector was also put into /etc/exim4/conf.d/main/000_local,
243 # # 2017-02 dmarc policies:
244 # # host -t txt _dmarc.gmail.com
245 # # yahoo: p=reject, hotmail: p=none, gmail: p=none, fastmail none for legacy reasons
246 # # there were articles claiming gmail would be changing
247 # # to p=reject, in early 2017, which didn\'t happen. I see no sources on them. It\'s
248 # # expected to cause problems
249 # # with a few old mailing lists, copying theirs for now.
251 # echo "dmarc dns, name: _dmarc value: v=DMARC1; p=none; rua=mailto:mailauth-reports@$domain"
255 # # 2017-02 spf policies:
256 # # host -t txt lists.fedoraproject.org
257 # # google ~all, hotmail ~all, yahoo: ?all, fastmail ?all, outlook ~all
258 # # i include fastmail\'s settings, per their instructions,
259 # # and follow their policy. In mail in a box, or similar instructions,
260 # # I\'ve seen recommended to not use a restrictive policy.
262 # # to check if dns has updated, you do
263 # host -a mesmtp._domainkey.$domain
266 # # setting it to iankelling.org would work the same, but this
267 # # is more flexible, I could change where mail.iankelling.org pointed.
269 # mx records, 2 records each, for * and empty domain
270 # pri 10 mail.iankelling.org
274 # from brc2, run dnsecgen then dsign, update named.local.conf, publish keys to registrar
276 # * functions & constants
279 m
() { printf "$pre %s\n" "$*"; "$@"; }
280 e
() { printf "$pre %s\n" "$*"; }
281 err
() { printf "$pre %s\n" "$*" >&2; exit 1; }
284 # This file is so if we fail in the middle and rerun, we dont lose state
285 if [[ -e /var
/local
/mail-setup-reload
]]; then
289 local tmp tmpdir dest
="$1"
290 local base
="${dest##*/}"
291 local dir
="${dest%/*}"
292 if [[ $dir != "$base" ]]; then
293 # dest has a directory component
299 tmp
=$
(rsync
-ic $tmpdir/"$base" "$dest")
303 if [[ $dest == /etc
/systemd
/system
/* ]]; then
304 touch /var
/local
/mail-setup-reload
311 key
="$1" value
="$2" section
="$3"
312 file="/etc/radicale/config"
313 sed -ri "/ *\[$section\]/,/^ *\[[^]]+\]/{/^\s*${key}[[:space:]=]/d};/ *\[$section\]/a $key = $value" "$file"
317 # ignore services that dont exist
318 if systemctl
cat $service &>/dev
/null
; then
319 m systemctl disable
--now $service
325 m systemctl restart
$service
326 m systemctl
enable $service;
330 [[ $HOSTNAME == "$MAIL_HOST" ]]
332 e
() { printf "%s\n" "$*"; }
335 if systemctl is-active
$service >/dev
/null
; then
336 m systemctl restart
$service
342 if systemctl is-active
$service >/dev
/null
; then
343 m systemctl stop
$service
348 mxhost
=mx.iankelling.org
351 # old setup. left as comment for example
352 # mxhost=mail.messagingengine.com
354 # forward=ian@iankelling.org
356 smarthost
="$mxhost::$mxport"
357 uhome
=$
(eval echo ~
$u)
359 # Somehow on one machine, a file got written with 664 perms.
360 # just being defensive here.
363 source /a
/bin
/bash_unpublished
/source-state
364 if [[ ! $MAIL_HOST ]]; then
365 err
"\$MAIL_HOST not set"
371 kd|frodo|x2|x3|kw|sy|bo
)
377 # * Install universal packages
380 # installs epanicclean iptables-exim ip6tables-exim
381 /a
/bin
/ds
/install-my-scripts
383 if [[ $
(debian-codename-compat
) == bionic
]]; then
384 cat >/etc
/apt
/preferences.d
/spamassassin
<<'EOF'
385 Package: spamassassin sa-compile spamc
386 Pin: release n=focal,o=Ubuntu
391 # light version of exim does not have sasl auth support.
392 # note: for bitfolk hosts, unbound has important config with conflink.
393 pi-nostart exim4 exim4-daemon-heavy spamassassin unbound clamav-daemon wireguard
395 # note: pyzor debian readme says you need to run some initialization command
397 pi spf-tools-perl p0f postgrey pyzor razor jq moreutils certbot fail2ban
400 # not included due to using wireguard: openvpn
401 *) pi wget git
unzip iptables
;;
403 # bad packages that sometimes get automatically installed
404 pu openresolv resolvconf
409 if [[ $
(debian-codename
) == etiona
]]; then
410 # ip6tables stopped loading on boot. openvpn has reduced capability set,
411 # so running iptables as part of openvpn startup wont work. This should do it.
412 pi iptables-persistent
413 cat >/etc
/iptables
/rules.v6
<<'EOF'
420 m ip6tables
-S >/dev
/null
423 # our nostart pi fails to avoid enabling
426 # * Mail clean cronjob
428 i
/etc
/systemd
/system
/mailclean.timer
<<'EOF'
430 Description=Run mailclean daily
436 WantedBy=timers.target
439 i
/etc
/systemd
/system
/mailclean.service
<<EOF
441 Description=Delete and archive old mail files
442 After=multi-user.target
447 ExecStart=/usr/local/bin/sysd-mail-once mailclean /a/bin/distro-setup/mailclean
453 i
/etc
/default
/postgrey
<<'EOF'
454 POSTGREY_OPTS="--exim --unix=/var/run/postgrey/postgrey.sock --retry-window=4 --max-age=60"
459 m usermod
-a -G Debian-exim clamav
461 i
/etc
/systemd
/system
/clamav-daemon.service.d
/fix.conf
<<EOF
463 ExecStartPre=-/bin/mkdir /var/run/clamav
464 ExecStartPre=/bin/chown clamav /var/run/clamav
470 #vpnser=mailvpn.service
471 # todo: this hangs if it cant resolv the endpoint. we
472 # want it to just retry in the background.
473 vpnser
=wg-quick@wgmail.service
477 rsync
-aiSAX --chown=root
:root
--chmod=g-s
/p
/c
/filesystem
/etc
/wireguard
/ /etc
/wireguard
478 bindpaths
="/etc/127.0.0.1-resolv:/run/systemd/resolve /etc/basic-nsswitch:/etc/resolved-nsswitch:norbind"
481 bindpaths
="/etc/10.173.8.1-resolv:/etc/127.0.0.1-resolv"
484 d
=/p
/c
/machine_specific
/$HOSTNAME/filesystem
/etc
/wireguard
/
486 rsync
-aiSAX --chown=root
:root
--chmod=g-s
$d /etc
/wireguard
494 i
/etc
/systemd
/system
/wg-quick@wgmail.service.d
/override.conf
<<EOF
496 Requires=mailnn.service
497 JoinsNamespaceOf=mailnn.service
498 BindsTo=mailnn.service
499 StartLimitIntervalSec=0
503 # i dont think we need any of these, but it doesnt hurt to stay consistent
513 # https://selivan.github.io/2017/12/30/systemd-serice-always-restart.html
514 i
/etc
/systemd
/system
/mailvpn.service
<<EOF
516 Description=OpenVPN tunnel for mail
517 After=syslog.target network-online.target mailnn.service
518 Wants=network-online.target
519 Documentation=man:openvpn(8)
520 Documentation=https://community.openvpn.net/openvpn/wiki/Openvpn24ManPage
521 Documentation=https://community.openvpn.net/openvpn/wiki/HOWTO
522 # needed to continually restatr
523 JoinsNamespaceOf=mailnn.service
524 BindsTo=mailnn.service
525 StartLimitIntervalSec=0
529 RuntimeDirectory=openvpn-client
530 RuntimeDirectoryMode=0710
531 WorkingDirectory=/etc/openvpn/client
532 ExecStart=/usr/sbin/openvpn --suppress-timestamps --nobind --config /etc/openvpn/client/mail.conf
533 #CapabilityBoundingSet=CAP_IPC_LOCK CAP_NET_ADMIN CAP_NET_RAW CAP_SETGID CAP_SETUID CAP_SYS_CHROOT CAP_DAC_OVERRIDE
535 # DeviceAllow=/dev/null rw
536 # DeviceAllow=/dev/net/tun rw
538 # in the network namespace, we cant connect to systemd-resolved on 127.0.0.53,
540 # https://unix.stackexchange.com/questions/445782/how-to-allow-systemd-resolved-to-listen-to-an-interface-other-than-loopback
541 # there is a workaround there, but i dont think its really worth it,
542 # the mail server is fine with a static dns anyways.
543 # This thread is also interesting,
544 # https://github.com/slingamn/namespaced-openvpn/issues/7
545 # todo: the iptables rule at the bottom could be useful to prevent
546 # dns from leaking in my network namespaced vpn.
547 # I also like the idea of patching systemd-resolved so it
548 # will listen on other interfaces, but its not worth my time.
551 # time to sleep before restarting a service
555 WantedBy=multi-user.target
558 i
/etc
/systemd
/system
/mailnnroute.service
<<'EOF'
560 Description=Network routing for mailnn
561 After=syslog.target network-online.target mailnn.service
562 Wants=network-online.target
563 JoinsNamespaceOf=mailnn.service
564 BindsTo=mailnn.service
565 StartLimitIntervalSec=0
571 ExecStart=/usr/bin/flock -w 20 /tmp/newns.flock /a/bin/newns/newns -n 10.173.8 start mail
572 ExecStop=/usr/bin/flock -w 20 /tmp/newns.flock /a/bin/newns/newns stop mail
578 WantedBy=multi-user.target
582 i
/etc
/systemd
/system
/mailnn.service
<<'EOF'
584 Description=Network Namespace for mail vpn service that will live forever and cant fail
585 After=syslog.target network-online.target
586 Wants=network-online.target
591 ExecStart=/bin/sleep infinity
594 WantedBy=multi-user.target
597 i
/etc
/systemd
/system
/mailbindwatchdog.service
<<EOF
599 Description=Watchdog to restart services relying on systemd-resolved dir
600 After=syslog.target network-online.target
601 Wants=network-online.target
602 BindsTo=mailnn.service
606 ExecStart=/usr/local/bin/mailbindwatchdog $vpnser ${nn_progs[@]} unbound.service radicale.service
608 # time to sleep before restarting a service
612 WantedBy=multi-user.target
618 rm -fv /etc
/systemd
/system
/openvpn-client-mail@.service
620 # We use a local unbound because systemd-resolved wont accept our
621 # request, it will only listen to 127.0.0.53 in the main network
622 # namespace, and rejected feature requests to change that (although I
623 # could change the code and recompile), but anyways, that could answer
624 # with things specific to the lan that aren't applicable in this
625 # namespace, and since unbound is a recursive resolver, it means we just
626 # use our own ip against dnsbl rate limits.
628 # If we ever notice this change, chattr +i on it
629 # trust-ad is used in t10+, glibc 2.31
631 i
/etc
/127.0.0.1-resolv/stub-resolv.conf
<<'EOF'
633 options edns0 trust-ad
636 i
/etc
/127.0.0.53-resolv/stub-resolv.conf
<<'EOF'
637 nameserver 127.0.0.53
638 options edns0 trust-ad
642 i
/etc
/10.173.8.1-resolv/stub-resolv.conf
<<'EOF'
643 nameserver 10.173.8.1
644 options edns0 trust-ad
647 # this is just a bug fix for trisquel.
648 f
=/etc
/apparmor.d
/usr.sbin.unbound
649 line
="/usr/sbin/unbound flags=(attach_disconnected) {"
650 if ! grep -qFx "$line" $f; then
651 badline
="/usr/sbin/unbound {"
652 if ! grep -qFx "$badline" $f; then
653 err expected line
in $f not found
655 sed -i "s,^$badline$,$line," $f
656 if systemctl is-active apparmor
&>/dev
/null
; then
657 m systemctl reload apparmor
661 # note: anything added to nn_progs needs corresponding rm
662 # down below in the host switch
665 # Note dovecots lmtp doesnt need to be in the same nn to accept delivery.
666 # Its in the nn so remote clients can connect to it.
667 nn_progs
+=(spamassassin dovecot
)
672 # todo, should this be after vpn service
673 i
/etc
/systemd
/system
/unbound.service.d
/nn.conf
<<EOF
676 JoinsNamespaceOf=mailnn.service
677 BindsTo=mailnn.service
678 StartLimitIntervalSec=0
682 # note the nsswitch bind is actually not needed for bk, but
683 # its the same file so it does no harm.
690 # sooo, there are a few ways to get traffic from the mail network
691 # namespace to go over the wghole.
693 #1: unify the mail vpn and wghole
694 # into 1 network. this seems simple and logical, so I'm doing it.
695 # One general downside is tying things together, if I need to mess
696 # with one thing, it breaks the other. Oh well for now.
698 # 2. We can route 10.5.3.0/24 out of the mail nn and nat it into wghole.
700 # 3. We can setup the routing to happen on li, which seemed like I
701 # just needed to add 10.8.0.4/24 to AllowedIPs in at least the
702 # wghole clients, but I think that is kind of hacky and breaks ipv4
703 # routing within the mailvpn, it happened to work just because exim
704 # prefers ipv6 and that was also available in the mailvpn.
706 # 4. Put the hole interface into the mail network namespace. This
707 # doesn't work if the mail vpn is wg. For openvpn, it bypasses the
708 # vpn routing and establishes a direct connection. I only use the
709 # hole vpn for randomish things, it should be fine to join the mail
710 # nn for that. There should be some way to fix the routing issue
711 # by doing manual routing, but that doesn't seem like a good use of time.
713 # https://www.wireguard.com/netns/#
715 # for wireguard debugging
716 # echo module wireguard +p > /sys/kernel/debug/dynamic_debug/control
721 for unit
in ${nn_progs[@]}; do
722 i
/etc
/systemd
/system
/$unit.service.d
/nn.conf
<<EOF
725 # Wants appears better than requires because with requires,
726 # if the vpnser fails to start, this service won't get run at
727 # all, even if the vpnser starts on an automatic restart.
730 After=network.target mailnn.service $vpnser
731 JoinsNamespaceOf=mailnn.service
732 BindsTo=mailnn.service
733 StartLimitIntervalSec=0
737 # note the nsswitch bind is actually not needed for bk, but
738 # its the same file so it does no harm.
747 for unit
in exim4 spamassassin dovecot unbound
; do
748 f
=/etc
/systemd
/system
/$unit.service.d
/nn.conf
757 # * spamassassin config
758 i
/etc
/sysctl.d
/80-iank-mail.conf
<<'EOF'
760 net.netfilter.nf_conntrack_tcp_timeout_close_wait = 120
766 i
/etc
/spamassassin
/mylocal.cf
<<'EOF'
767 # this is mylocal.cf because the normal local.cf has a bunch of upstream stuff i dont want to mess with
769 # /usr/share/doc/exim4-base/README.Debian.gz:
770 # SpamAssassin's default report should not be used in a add_header
771 # statement since it contains empty lines. (This triggers e.g. Amavis'
772 # warning "BAD HEADER SECTION, Improper folded header field made up
773 # entirely of whitespace".) This is a safe, terse alternative:
774 clear_report_template
775 report (_SCORE_ / _REQD_ requ) _TESTSSCORES(,)_ autolearn=_AUTOLEARN
776 uridnsbl_skip_domain iankelling.org
777 uridnsbl_skip_domain amnimal.ninja
778 uridnsbl_skip_domain expertpathologyreview.com
779 uridnsbl_skip_domain zroe.org
782 # 2020-10-19 remove old file. remove this when all hosts updated
783 rm -fv /etc
/systemd
/system
/spamddnsfix.
{timer
,service
}
785 i
/etc
/default
/spamassassin
<<'EOF'
786 # defaults plus debugging flags for an issue im having
787 OPTIONS="--create-prefs --max-children 5 --helper-home-dir"
788 PIDFILE="/var/run/spamd.pid"
790 NICE="--nicelevel 15"
793 ##### end spamassassin config
797 if [[ -e /p
/c
/filesystem
]]; then
798 # note, man openvpn implies we could just call mail-route on vpn startup/shutdown with
799 # systemd, buuut it can remake the tun device unexpectedly, i got this in the log
800 # after my internet was down for a bit:
801 # NOTE: Pulled options changed on restart, will need to close and reopen TUN/TAP device.
802 m
/a
/exe
/vpn-mk-client-cert
-b mailclient
-n mail li.iankelling.org
805 # With openvpn, I didn't get around to persisting the openvpn
806 # cert/configs into /p/c/machine_specific/bk, so I had this case to
807 # manually get the cert. However, we aren't using openvpn anymore, so it
812 # if [[ ! -e /etc/openvpn/client/mail.conf ]]; then
813 # echo "$0: error: first, on a system with /p/c/filesystem, run mail-setup, or the vpn-mk-client-cert line above this err" 2>&2
819 m rsync
-aiSAX --chown=root
:root
--chmod=g-s
/a
/bin
/ds
/mail-cert-cron
/usr
/local
/bin
821 i
/etc
/systemd
/system
/mailcert.service
<<'EOF'
823 Description=Mail cert rsync
824 After=multi-user.target
828 ExecStart=/usr/local/bin/sysd-mail-once mailcert /usr/local/bin/mail-cert-cron
830 i
/etc
/systemd
/system
/mailcert.timer
<<'EOF'
832 Description=Run mail-cert once a day
838 WantedBy=timers.target
842 wghost
=${HOSTNAME}wg.b8.nz
843 if $bhost_t && [[ ! -e /etc
/exim
4/certs
/$wghost/privkey.pem
]]; then
844 certbot
-n --manual-public-ip-logging-ok --eff-email --agree-tos -m letsencrypt@iankelling.org \
845 certonly
--manual --preferred-challenges=dns \
846 --manual-auth-hook /a
/bin
/ds
/le-dns-challenge \
847 --manual-cleanup-hook /a
/bin
/ds
/le-dns-challenge-cleanup \
848 --deploy-hook /a
/bin
/ds
/le-exim-deploy
-d $wghost
853 # todo: test that these configs actually work, eg run
855 # and see someone is banned.
857 sed 's/^ *before *= *iptables-common.conf/before = iptables-common-exim.conf/' \
858 /etc
/fail2ban
/action.d
/iptables-multiport.conf| i
/etc
/fail2ban
/action.d
/iptables-exim.conf
859 i
/etc
/fail2ban
/action.d
/iptables-common-exim.conf
<<'EOF'
860 # iank: same as iptables-common, except iptables is iptables-exim, ip6tables is ip6tables-exim
862 # Fail2Ban configuration file
864 # Author: Daniel Black
866 # This is a included configuration file and includes the definitions for the iptables
867 # used in all iptables based actions by default.
869 # The user can override the defaults in iptables-common.local
871 # Modified: Alexander Koeppe <format_c@online.de>, Serg G. Brester <serg.brester@sebres.de>
872 # made config file IPv6 capable (see new section Init?family=inet6)
876 after = iptables-blocktype.local
877 iptables-common.local
878 # iptables-blocktype.local is obsolete
882 # Option: actionflush
883 # Notes.: command executed once to flush IPS, by shutdown (resp. by stop of the jail or this action)
886 actionflush = <iptables> -F f2b-<name>
892 # Notes specifies the iptables chain to which the Fail2Ban rules should be
894 # Values: STRING Default: INPUT
897 # Default name of the chain
902 # Notes.: specifies port to monitor
903 # Values: [ NUM | STRING ] Default:
908 # Notes.: internally used by config reader for interpolations.
909 # Values: [ tcp | udp | icmp | all ] Default: tcp
914 # Note: This is what the action does with rules. This can be any jump target
915 # as per the iptables man page (section 8). Common values are DROP
916 # REJECT, REJECT --reject-with icmp-port-unreachable
918 blocktype = REJECT --reject-with icmp-port-unreachable
921 # Note: This is the default rule on "actionstart". This should be RETURN
922 # in all (blocking) actions, except REJECT in allowing actions.
927 # Notes.: Option was introduced to iptables to prevent multiple instances from
928 # running concurrently and causing irratic behavior. -w was introduced
929 # in iptables 1.4.20, so might be absent on older systems
930 # See https://github.com/fail2ban/fail2ban/issues/1122
935 # Notes.: Actual command to be executed, including common to all calls options
937 iptables = /usr/local/bin/iptables-exim <lockingopt>
942 # Option: blocktype (ipv6)
943 # Note: This is what the action does with rules. This can be any jump target
944 # as per the iptables man page (section 8). Common values are DROP
945 # REJECT, REJECT --reject-with icmp6-port-unreachable
947 blocktype = REJECT --reject-with icmp6-port-unreachable
949 # Option: iptables (ipv6)
950 # Notes.: Actual command to be executed, including common to all calls options
952 iptables = /usr/local/bin/ip6tables-exim <lockingopt>
955 i
/etc
/fail2ban
/jail.d
/exim.
local <<'EOF'
960 banaction = iptables-exim
962 # 209.51.188.13 = mail.fsf.org
963 # 2001:470:142::13 = mail.fsf.org
964 # 209.51.188.92 = eggs.gnu.org
965 # 2001:470:142:3::10 = eggs.gnu.org
966 # 72.14.176.105 2600:3c00:e000:280::2 = mail.iankelling.org
967 # 10.173.8.1 = non-nn net
968 ignoreip = 209.51.188.13 2001:470:142::13 209.51.188.92 2001:470:142:3::10 72.14.176.105 2600:3c00:e000:280::2 10.173.8.1
971 m systemctl restart fail2ban
974 # * common exim4 config
977 ## old, not using forward files anymore
978 rm -fv $uhome/.forward
/root
/.forward
981 # Make all system users be aliases. preventative
982 # prevents things like cron mail for user without alias
983 awk 'BEGIN { FS = ":" } ; $6 !~ /^\/home/ || $7 ~ /\/nologin$/ { print $1 }' /etc
/passwd|
while read -r user
; do
984 if [[ ! $user ]]; then
987 if ! grep -q "^$user:" /etc
/aliases
; then
988 echo "$user: root" |m
tee -a /etc
/aliases
993 awk 'BEGIN { FS = ":" } ; $6 ~ /^\/home/ && $7 !~ /\/nologin$/ { print $1 }' /etc
/passwd|
while read -r user
; do
996 sed -i "/^user:/d" /etc
/aliases
999 if ! grep -q "^$user:" /etc
/aliases
; then
1000 echo "$user: root" |m
tee -a /etc
/aliases
1007 .
/a
/bin
/bash_unpublished
/priv-mail-setup
1010 m gpasswd
-a iank adm
#needed for reading logs
1012 ### make local bounces go to normal maildir
1013 # local mail that bounces goes to /Maildir or /root/Maildir
1014 dirs=(/m
/md
/bounces
/{cur
,tmp
,new
})
1015 m mkdir
-p ${dirs[@]}
1016 m chown iank
:iank
/m
/m
/md
1017 m
ln -sfT /m
/md
/m
/iank
1018 m
chmod 771 /m
/m
/md
1019 m chown
-R $u:Debian-exim
/m
/md
/bounces
1020 m
chmod 775 ${dirs[@]}
1021 m usermod
-a -G Debian-exim
$u
1022 for d
in /Maildir
/root
/Maildir
; do
1023 if [[ ! -L $d ]]; then
1026 m
ln -sf -T /m
/md
/bounces
$d
1029 # dkim, client passwd file
1030 files
=(/p
/c
/machine_specific
/$HOSTNAME/filesystem
/etc
/exim
4/*)
1031 f
=/p
/c
/filesystem
/etc
/exim
4/passwd.client
1032 if [[ -e $f ]]; then
1035 if (( ${#files[@]} )); then
1036 m rsync
-ahhi --chown=root
:Debian-exim
--chmod=0640 \
1037 ${files[@]} /etc
/exim4
1040 # By default, only 10 days of logs are kept. increase that.
1041 # And dont compress, I look back at logs too often and
1042 # dont need the annoyance of decompressing them all the time.
1043 m
sed -ri '/^\s*compress\s*$/d;s/^(\s*rotate\s).*/\11000/' /etc
/logrotate.d
/exim4-base
1044 files
=(/var
/log
/exim
4/*.gz
)
1045 if (( ${#files[@]} )); then
1049 ## disabled. not using .forward files, but this is still interesting
1051 # ## https://blog.dhampir.no/content/make-exim4-on-debian-respect-forward-and-etcaliases-when-using-a-smarthost
1052 # # i only need .forwards, so just doing that one.
1053 # cd /etc/exim4/conf.d/router
1054 # b=userforward_higher_priority
1055 # # replace the router name so it is unique
1056 # sed -r s/^\\S+:/$b:/ 600_exim4-config_userforward >175_$b
1057 rm -fv /etc
/exim
4/conf.d
/router
/175_userforward_higher_priority
1059 # todo, consider 'separate' in etc/exim4.conf, could it help on busy systems?
1061 # alerts is basically the postmaster address
1062 m
sed -i --follow-symlinks -f - /etc
/aliases
<<EOF
1063 \$a root: alerts@iankelling.org
1067 cat >/etc
/exim
4/conf.d
/rewrite
/34_iank_rewriting
<<'EOF'
1068 ncsoft@zroe.org graceq2323@gmail.com hE
1072 rm -fv /etc
/exim
4/conf.d
/retry
/37_retry
1074 cat >/etc
/exim
4/conf.d
/retry
/17_retry
<<'EOF'
1075 # Retry fast for my own domains
1076 iankelling.org * F,1d,4m;F,14d,1h
1077 amnimal.ninja * F,1d,4m;F,14d,1h
1078 expertpathologyreview.com * F,1d,4m;F,14d,1h
1079 je.b8.nz * F,1d,4m;F,14d,1h
1080 zroe.org * F,1d,4m;F,14d,1h
1081 eximbackup.b8.nz * F,1d,4m;F,14d,1h
1083 # The spec says the target domain will be used for temporary host errors,
1084 # but i've found that isn't correct, the hostname is required
1085 # at least sometimes.
1086 nn.b8.nz * F,1d,4m;F,14d,1h
1087 defaultnn.b8.nz * F,1d,4m;F,14d,1h
1088 mx.iankelling.org * F,1d,4m;F,14d,1h
1089 bk.b8.nz * F,1d,4m;F,14d,1h
1090 eggs.gnu.org * F,1d,4m;F,14d,1h
1091 fencepost.gnu.org * F,1d,4m;F,14d,1h
1093 # afaik our retry doesnt need this, but just using everything
1094 mx.amnimal.ninja * F,1d,4m;F,14d,1h
1095 mx.expertpathologyreview.com * F,1d,4m;F,14d,1h
1098 mail.fsf.org * F,1d,15m;F,14d,1h
1102 rm -vf /etc
/exim
4/conf.d
/main
/000_localmacros
# old filename
1104 # separate file so without quoted EOF for convenience
1105 cat >/etc
/exim
4/conf.d
/main
/000_local2
<<EOF
1106 # normally empty, I set this so I can set the envelope address
1107 # when doing mail redelivery to invoke filters. Also allows
1108 # me exiqgrep and stuff.
1109 MAIN_TRUSTED_GROUPS = $u
1112 cat >/etc
/exim
4/conf.d
/main
/000_local
<<'EOF'
1113 MAIN_TLS_ENABLE = true
1115 # require tls connections for all smarthosts
1116 REMOTE_SMTP_SMARTHOST_HOSTS_REQUIRE_TLS = *
1118 # debian exim config added this in 2016 or so?
1119 # it's part of the smtp spec, to limit lines to 998 chars
1120 # but a fair amount of legit mail does not adhere to it. I don't think
1121 # this should be default, like it says in
1122 # https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=828801
1123 # todo: the bug for introducing this was about headers, but
1124 # the fix maybe is for all lines? one says gmail rejects, the
1125 # other says gmail does not reject. figure out and open a new bug.
1126 IGNORE_SMTP_LINE_LENGTH_LIMIT = true
1129 MAIN_LOG_SELECTOR = +all
1131 # Based on spec, seems like a good idea to be nice.
1132 smtp_return_error_details = true
1134 # default is 10. when exim has been down for a bit, fsf mailserver
1135 # will do a big send in one connection, then exim decides to put
1136 # the messages in the queue instead of delivering them, to avoid
1137 # spawning too many delivery processes. This is the same as the
1138 # fsfs value. And the corresponding one for how many messages
1139 # to send out in 1 connection remote_max_parallel = 256
1140 smtp_accept_queue_per_connection = 500
1143 DKIM_CANON = relaxed
1147 # https://debian-administration.org/article/718/DKIM-signing_outgoing_mail_with_exim4
1148 # and its best for this to align https://tools.ietf.org/html/rfc7489#page-8
1149 # There could be some circumstance when the
1150 # from: isnt our domain, but the envelope sender is
1151 # and so still want to sign, but I cant think of any case.
1152 DKIM_DOMAIN = ${lc:${domain:$rh_from:}}
1153 # The file is based on the outgoing domain-name in the from-header.
1154 # sign if key exists
1155 DKIM_PRIVATE_KEY = ${if exists{/etc/exim4/${dkim_domain}-private.pem} {/etc/exim4/${dkim_domain}-private.pem}}
1157 # most of the ones that gmail seems to use.
1158 # Exim has horrible default of signing unincluded
1159 # list- headers since they got mentioned in an
1160 # rfc, but this messes up mailing lists, like gnu/debian which want to
1161 # keep your dkim signature intact but add list- headers.
1162 DKIM_SIGN_HEADERS = mime-version:in-reply-to:references:from:date:subject:to
1164 domainlist local_hostnames = ! je.b8.nz : ! bk.b8.nz : *.b8.nz : b8.nz
1166 hostlist iank_trusted = <; \
1170 72.14.176.105 ; 2600:3c00::f03c:91ff:fe6d:baf8 ; \
1171 # li_vpn_net li_vpn_net_ip6s
1172 10.8.0.0/24; 2600:3c00:e000:280::/64 ; 2600:3c00:e002:3800::/56 ; \
1174 85.119.83.50 ; 2001:ba8:1f1:f0c9::2 ; \
1176 85.119.82.128 ; 2001:ba8:1f1:f09d::2 ; \
1177 # fsf_mit_net fsf_mit_net_ip6 fsf_net fsf_net_ip6 fsf_office_net
1178 18.4.89.0/24 ; 2603:3005:71a:2e00::/64 ; 209.51.188.0/24 ; 2001:470:142::/48 ; 74.94.156.208/28
1181 # this is the default delay_warning_condition, plus matching on local_domains.
1182 # If I have some problem with my local system that causes delayed delivery,
1183 # I dont want to send warnings out to non-local domains.
1184 delay_warning_condition = ${if or {\
1185 { !eq{$h_list-id:$h_list-post:$h_list-subscribe:}{} }\
1186 { match{$h_precedence:}{(?i)bulk|list|junk} }\
1187 { match{$h_auto-submitted:}{(?i)auto-generated|auto-replied} }\
1188 { match_domain{$domain}{+local_domains} }\
1192 # enable 587 in addition to the default 25, so that
1193 # i can send mail where port 25 is firewalled by isp
1194 daemon_smtp_ports = 25 : 587
1195 # default of 25, can get stuck when catching up on mail
1196 smtp_accept_max = 400
1197 smtp_accept_reserve = 100
1198 smtp_reserve_hosts = +iank_trusted
1200 # Rules that make receiving more liberal should be on backup hosts
1201 # so that we dont reject mail accepted by MAIL_HOST
1202 LOCAL_DENY_EXCEPTIONS_LOCAL_ACL_FILE = /etc/exim4/conf.d/local_deny_exceptions_acl
1205 rm -fv /etc
/exim
4/rcpt_local_acl
# old path
1207 i
/etc
/exim
4/conf.d
/local_deny_exceptions_acl
<<'EOF'
1208 # This acl already exists in rcpt, this just makes it more widespread.
1209 # See the comment there for its rationale. The reason it needs to be
1210 # more widespread is that I've turned on sender verification, but cron
1211 # emails can fail sender verification since I may be in a network that
1212 # doesn't have my local dns.
1216 # i setup a local programs smtp to mail.iankelling.org, this
1217 # skips sender verification for it.
1222 rm -fv /etc
/exim
4/data_local_acl
# old path
1224 i
/etc
/exim
4/conf.d
/data_local_acl
<<'EOF'
1225 # Except for the "condition =", this was
1226 # a comment in the check_data acl. The comment about this not
1227 # being suitable has been changed in newer exim versions. The only thing
1228 # related I found was to
1229 # add the condition =, cuz spamassassin has problems with big
1230 # messages and spammers don't bother with big messages,
1231 # but I've increased the size from 10k
1232 # suggested in official docs, and 100k in the wiki example because
1233 # those docs are rather old and I see a 110k spam message
1234 # pretty quickly looking through my spam folder.
1237 !hosts = +iank_trusted
1238 remove_header = X-Spam_score: X-Spam_score_int : X-Spam_bar : X-Spam_report
1241 !hosts = +iank_trusted
1242 # Smarthosts connect with residential ips and thus get flagged as spam if we do a spam check.
1243 !authenticated = plain_server:login_server
1244 condition = ${if < {$message_size}{5000K}}
1245 spam = Debian-exim:true
1246 add_header = X-Spam_score_int: $spam_score_int
1247 add_header = X-Spam_score: $spam_score
1248 add_header = X-Spam_bar: $spam_bar
1249 add_header = X-Spam_report: $spam_report
1250 add_header = X-Spam_action: $spam_action
1253 !hosts = +iank_trusted
1254 !authenticated = plain_server:login_server
1255 condition = ${if def:malware_name}
1256 remove_header = Subject:
1257 add_header = Subject: [Clamav warning: $malware_name] $h_subject
1258 log_message = heuristic malware warning: $malware_name
1261 # spf = pass:fail:softfail:none:neutral:permerror:temperror
1262 # dmarc_status = reject:quarantine
1263 # add_header = Reply-to: dmarctest@iankelling.org
1267 i
/etc
/exim
4/conf.d
/router
/900_exim4-config_local_user
<<'EOF'
1268 ### router/900_exim4-config_local_user
1269 #################################
1271 # This router matches local user mailboxes. If the router fails, the error
1272 # message is "Unknown user".
1274 debug_print = "R: local_user for $local_part@$domain"
1276 domains = +local_domains
1277 # ian: default file except where mentioned.
1278 # ian: commented this. I get all local parts. for bk, an rcpt
1279 # check handles checking with dovecot, and the only router
1280 # after this is root.
1281 # local_parts = ! root
1282 transport = LOCAL_DELIVERY
1283 cannot_route_message = Unknown user
1284 # ian: added for + addressing.
1285 local_part_suffix = +*
1286 local_part_suffix_optional
1288 i
/etc
/exim
4/conf.d
/transport
/30_exim4-config_dovecot_lmtp
<<'EOF'
1291 socket = /var/run/dovecot/lmtp
1292 #maximum number of deliveries per batch, default 1
1297 i
/etc
/exim
4/conf.d
/transport
/30_remote_smtp_vpn
<<'EOF'
1298 # same as debians 30_exim4-config_remote_smtp, but
1299 # with interface added at the end.
1302 debug_print = "T: remote_smtp_vpn for $local_part@$domain"
1304 .ifndef IGNORE_SMTP_LINE_LENGTH_LIMIT
1305 message_size_limit = ${if > {$max_received_linelength}{998} {1}{0}}
1307 .ifdef REMOTE_SMTP_HOSTS_AVOID_TLS
1308 hosts_avoid_tls = REMOTE_SMTP_HOSTS_AVOID_TLS
1310 .ifdef REMOTE_SMTP_HEADERS_REWRITE
1311 headers_rewrite = REMOTE_SMTP_HEADERS_REWRITE
1313 .ifdef REMOTE_SMTP_RETURN_PATH
1314 return_path = REMOTE_SMTP_RETURN_PATH
1316 .ifdef REMOTE_SMTP_HELO_DATA
1317 helo_data=REMOTE_SMTP_HELO_DATA
1320 dkim_domain = DKIM_DOMAIN
1322 .ifdef DKIM_SELECTOR
1323 dkim_selector = DKIM_SELECTOR
1325 .ifdef DKIM_PRIVATE_KEY
1326 dkim_private_key = DKIM_PRIVATE_KEY
1329 dkim_canon = DKIM_CANON
1332 dkim_strict = DKIM_STRICT
1334 .ifdef DKIM_SIGN_HEADERS
1335 dkim_sign_headers = DKIM_SIGN_HEADERS
1337 .ifdef TLS_DH_MIN_BITS
1338 tls_dh_min_bits = TLS_DH_MIN_BITS
1340 .ifdef REMOTE_SMTP_TLS_CERTIFICATE
1341 tls_certificate = REMOTE_SMTP_TLS_CERTIFICATE
1343 .ifdef REMOTE_SMTP_PRIVATEKEY
1344 tls_privatekey = REMOTE_SMTP_PRIVATEKEY
1346 .ifdef REMOTE_SMTP_HOSTS_REQUIRE_TLS
1347 hosts_require_tls = REMOTE_SMTP_HOSTS_REQUIRE_TLS
1349 .ifdef REMOTE_SMTP_TRANSPORTS_HEADERS_REMOVE
1350 headers_remove = REMOTE_SMTP_TRANSPORTS_HEADERS_REMOVE
1352 interface = <; 10.8.0.4 ; 2600:3c00:e002:3800::4
1355 i
/etc
/exim
4/conf.d
/transport
/30_smarthost_dkim
<<'EOF'
1356 # ian: this is remote_smtp_smarthost plus the dkim parts from remote_smtp
1359 debug_print = "T: remote_smtp_smarthost for $local_part@$domain"
1362 .ifndef IGNORE_SMTP_LINE_LENGTH_LIMIT
1363 message_size_limit = ${if > {$max_received_linelength}{998} {1}{0}}
1365 hosts_try_auth = <; ${if exists{CONFDIR/passwd.client} \
1367 ${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$host_address}}\
1371 .ifdef REMOTE_SMTP_SMARTHOST_HOSTS_AVOID_TLS
1372 hosts_avoid_tls = REMOTE_SMTP_SMARTHOST_HOSTS_AVOID_TLS
1374 .ifdef REMOTE_SMTP_SMARTHOST_HOSTS_REQUIRE_TLS
1375 hosts_require_tls = REMOTE_SMTP_SMARTHOST_HOSTS_REQUIRE_TLS
1377 .ifdef REMOTE_SMTP_SMARTHOST_TLS_VERIFY_CERTIFICATES
1378 tls_verify_certificates = REMOTE_SMTP_SMARTHOST_TLS_VERIFY_CERTIFICATES
1380 .ifdef REMOTE_SMTP_SMARTHOST_TLS_VERIFY_HOSTS
1381 tls_verify_hosts = REMOTE_SMTP_SMARTHOST_TLS_VERIFY_HOST
1383 .ifdef REMOTE_SMTP_HEADERS_REWRITE
1384 headers_rewrite = REMOTE_SMTP_HEADERS_REWRITE
1386 .ifdef REMOTE_SMTP_RETURN_PATH
1387 return_path = REMOTE_SMTP_RETURN_PATH
1389 .ifdef REMOTE_SMTP_HELO_DATA
1390 helo_data=REMOTE_SMTP_HELO_DATA
1392 .ifdef TLS_DH_MIN_BITS
1393 tls_dh_min_bits = TLS_DH_MIN_BITS
1395 .ifdef REMOTE_SMTP_SMARTHOST_TLS_CERTIFICATE
1396 tls_certificate = REMOTE_SMTP_SMARTHOST_TLS_CERTIFICATE
1398 .ifdef REMOTE_SMTP_SMARTHOST_PRIVATEKEY
1399 tls_privatekey = REMOTE_SMTP_SMARTHOST_PRIVATEKEY
1401 .ifdef REMOTE_SMTP_TRANSPORTS_HEADERS_REMOVE
1402 headers_remove = REMOTE_SMTP_TRANSPORTS_HEADERS_REMOVE
1405 dkim_domain = DKIM_DOMAIN
1407 .ifdef DKIM_SELECTOR
1408 dkim_selector = DKIM_SELECTOR
1410 .ifdef DKIM_PRIVATE_KEY
1411 dkim_private_key = DKIM_PRIVATE_KEY
1414 dkim_canon = DKIM_CANON
1417 dkim_strict = DKIM_STRICT
1419 .ifdef DKIM_SIGN_HEADERS
1420 dkim_sign_headers = DKIM_SIGN_HEADERS
1425 cat >/etc
/exim
4/update-exim4.conf.conf
<<'EOF'
1426 # default stuff, i havent checked if its needed
1427 dc_minimaldns='false'
1430 dc_use_split_config='true'
1431 dc_mailname_in_oh='true'
1437 if ! mountpoint
/o
; then
1438 echo "error /o is not a mountpoint" >&2
1442 # davx/davdroid setup instructions at the bottom
1445 # http://radicale.org/user_documentation/
1446 # https://davdroid.bitfire.at/configuration/
1448 # note on debugging: if radicale can't bind to the address,
1449 # in the log it just says "Starting Radicale". If you run
1450 # it in the foreground, it will give more info. Background
1451 # plus debug does not help.
1452 # sudo -u radicale radicale -D -f
1454 # created password file with:
1455 # htpasswd -c /p/c/machine_specific/li/filesystem/etc/caldav-htpasswd
1456 # chmod 640 /p/c/machine_specific/li/filesystem/etc/caldav-htpasswd
1457 # # setup chgrp www-data in ./conflink
1461 i
/etc
/systemd
/system
/radicale.service.d
/override.conf
<<EOF
1464 After=network.target network-online.target mailnn.service $vpnser
1467 JoinsNamespaceOf=mailnn.service
1468 StartLimitIntervalSec=0
1472 BindPaths=$bindpaths
1474 # time to sleep before restarting a service
1483 # use persistent uid/gid
1484 IFS
=:; read -r _ _ uid _
< <(getent passwd radicale
); unset IFS
1485 IFS
=:; read -r _ _ gid _
< <(getent group radicale
); unset IFS
1486 if [[ $uid != 609 ]]; then
1487 m systemctl stop radicale ||
:
1488 m usermod
-u 609 radicale
1489 m groupmod
-g 609 radicale
1490 m usermod
-g 609 radicale
1492 m
find /o
/radicale
-xdev -exec chown
-h 609 {} +
1493 m
find /o
/radicale
-xdev -exec chgrp
-h 609 {} +
1496 # I moved /var/lib/radicale after it's initialization.
1497 # I did a sudo -u radicale git init in the collections subfolder
1498 # after it gets created, per the git docs.
1499 m
/a
/exe
/lnf
-T /o
/radicale
/var
/lib
/radicale
1501 # from https://www.williamjbowman.com/blog/2015/07/24/setting-up-webdav-caldav-and-carddav-servers/
1503 # more config is for li in distro-end
1505 # coment in this file says this is needed for it to run on startup
1506 sed -ri 's/^\s*#+\s*(ENABLE_RADICALE\s*=\s*yes\s*)/\1/' /etc
/default
/radicale
1508 # comments say default is 0.0.0.0:5232
1509 m setini hosts
10.8.0.4:5232 server
1510 # https://radicale.org/2.1.html
1511 m setini
type http_x_remote_user auth
1514 # disable power management feature, set to 240 min sync interval,
1515 # so it shouldn't be bad.
1517 # davdroid from f-druid.
1518 # login with url and user name
1519 # url https://cal.iankelling.org/ian
1521 # pass, see password manager for radicale
1523 # add account dialog:
1525 # set account name as ian@iankelling.org, per help text below the
1528 # switch to groups are per-contact categories,
1529 # per https://davdroid.bitfire.at/configuration/radicale/
1532 # After setting up account, I added one address book, named
1533 # ianaddr. calender was already created, named ian. checked boxes under
1536 # To restore from old phone to new phone, I wiped all data out, then copied over the newly created files. I think
1538 # ignorable background info:
1540 # opentasks uses the calendar file.
1542 # The address book I created got a uuid as a name for the file. Note
1543 # the .props file says if it's a calendar or addressbook.
1545 # When debugging, tailed /var/log/radicale/radicale.log and apache log,
1546 # both show the requests happening. Without creating the address book,
1547 # after creating a contact, a sync would delete it.
1549 # Address books correspond to .props files in the radicale dir.
1551 # Some background is here,
1552 # https://davdroid.bitfire.at/faq/entry/cant-manage-groups-on-device/
1553 # which shows separate vcard option is from rfc 6350, the other is 2426,
1554 # radicale page says it implements the former not the latter,
1555 # which conflicts with the documentation of which to select, but whatever.
1556 # http://radicale.org/technical_choices/
1557 # https://davdroid.bitfire.at/faq/entry/cant-manage-groups-on-device/
1559 # Note, url above says only cayanogenmod 13+ and omnirom can manage groups.
1561 # Note, radicale had built-in git support to track changes, but they
1562 # removed it in 2.0.
1568 # ** $MAIL_HOST|bk|je)
1571 # based on a little google and package search, just the dovecot
1572 # packages we need instead of dovecot-common.
1574 # dovecot-lmtpd is for exim to deliver to dovecot instead of maildir
1575 # directly. The reason to do this is to use dovecot\'s sieve, which
1576 # can generally do more than exims filters (a few things less) and
1577 # sieve has the benefit of being supported in postfix and
1578 # proprietary/weird environments, so there is more examples on the
1580 pi-nostart dovecot-core dovecot-imapd dovecot-sieve dovecot-lmtpd dovecot-sqlite sqlite3
1582 for f
in /p
/c
{/machine_specific
/$HOSTNAME,}/filesystem
/etc
/dovecot
/users
; do
1583 if [[ -e $f ]]; then
1584 m rsync
-ahhi --chown=root
:dovecot
--chmod=0640 $f /etc
/dovecot
/
1588 for f
in /p
/c
/subdir_files
/sieve
/*sieve
/a
/bin
/ds
/subdir_files
/sieve
/*sieve
; do
1589 m sudo
-u $u /a
/exe
/lnf
-v -T $f $uhome/sieve
/${f##*/}
1592 # https://wiki.dovecot.org/SSL/DovecotConfiguration
1593 i
/etc
/dovecot
/dhparam
<<'EOF'
1594 -----BEGIN DH PARAMETERS-----
1595 MIIBCAKCAQEAoleil6SBxGqQKk7j0y2vV3Oklv6XupZKn7PkPv485QuFeFagifeS
1596 A+Jz6Wquqk5zhGyCu63Hp4wzGs4TyQqoLjkaWL6Ra/Bw3g3ofPEzMGEsV1Qdqde4
1597 jorwiwtr2i9E6TXQp0noT/7VFeHulIkayTeW8JulINdMHs+oLylv16McGCIrxbkM
1598 8D1PuO0TP/CNDs2QbRvJ1RjY3CeGpxMhrSHVgBCUMwnA2cvz3bYjI7UMYMMDPNrE
1599 PLrwsYzXGGCdJsO2vsmmqqgLsZiapYJlUNjfiyWLt7E2H6WzkNB3VIhIPfLqFDPK
1600 xioE3sYKdjOt+p6mlg3l8+OLtODEFPHDqwIBAg==
1601 -----END DH PARAMETERS-----
1605 if [[ $HOSTNAME == "$MAIL_HOST" ]]; then
1607 ssl_cert = </etc/exim4/fullchain.pem
1608 ssl_key = </etc/exim4/privkey.pem
1611 # We have a lets encrypt hooks that puts things here.
1612 # This is just for bk, which uses the vpn cert in exim
1613 # for sending mail, but the local hostname cert for
1616 ssl_cert = </etc/exim4/exim.crt
1617 ssl_key = </etc/exim4/exim.key
1622 # https://ssl-config.mozilla.org
1624 # this is the same as the certbot list, i check changes in /a/bin/ds/filesystem/usr/local/bin/check-lets-encrypt-ssl-settings
1625 ssl_cipher_list = ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384
1626 ssl_protocols = TLSv1.2
1627 ssl_prefer_server_ciphers = no
1630 #per https://wiki2.dovecot.org/Pigeonhole/Sieve/Configuration
1631 # default is just $mail_plugins
1632 mail_plugins = $mail_plugins sieve
1635 if dpkg
--compare-versions "$(dpkg-query -f='${Version}\n' --show dovecot-core)" ge
1:2.3; then
1637 ssl_dh = </etc/dovecot/dhparam
1640 } >/etc
/dovecot
/local.conf
1646 # If we changed 90-sieve.conf and removed the active part of the
1647 # sieve option, we wouldn\'t need this, but I\'d rather not modify a
1648 # default config if not needed. This won\'t work as a symlink in /a/c
1650 m sudo
-u $u /a
/exe
/lnf
-T sieve
/main.sieve
$uhome/.dovecot.sieve
1652 if [[ ! -e $uhome/sieve
/personal.sieve
]]; then
1653 m
touch $uhome/sieve
/personal
{,end
}{,test}.sieve
1656 rm -fv /etc
/dovecot
/conf.d
/20-lmtp.conf
# file from prev version
1657 cat >>/etc
/dovecot
/local.conf
<<EOF
1658 # simple password file based login
1659 !include conf.d/auth-passwdfile.conf.ext
1661 # ian: %u is used for alerts user vs iank
1662 mail_location = maildir:/m/%u:LAYOUT=fs:INBOX=/m/%u/INBOX
1667 # For a normal setup with exim, we need something like this, which
1668 # removes the domain part
1669 # auth_username_format = %Ln
1671 # or else # Exim says something like
1672 # "LMTP error after RCPT ... 550 ... User doesn't exist someuser@somedomain"
1673 # Dovecot verbose log says something like
1674 # "auth-worker(9048): passwd(someuser@somedomain): unknown user"
1675 # reference: http://wiki.dovecot.org/LMTP/Exim
1677 # However, I use this to direct all mail to the same inbox.
1678 # A normal way to do this, which I did at first is to have
1679 # a router in exim almost at the end, eg 950,
1681 # debug_print = "R: catchall for \$local_part@\$domain"
1683 # domains = +local_domains
1686 # http://blog.alteholz.eu/2015/04/exim4-and-catchall-email-address/
1687 # with superflous options removed.
1688 # However, this causes the envelope to be rewritten,
1689 # which makes filtering into mailboxes a little less robust or more complicated,
1690 # so I've done it this way instead. it also requires
1691 # modifying the local router in exim.
1692 auth_username_format = $u
1698 chown
-R mail.
mail /m
/md
1700 f
=/etc
/dovecot
/conf.d
/10-auth.conf
1701 if [[ -e $f ]]; then
1702 mv $f $f-iank-disabled
1705 cat >>/etc
/dovecot
/local.conf
<<EOF
1706 !include /etc/dovecot/local.conf.ext
1708 # for debugging info, uncomment these.
1709 # logs go to syslog and to /var/log/mail.log
1715 # This downcases the localpart. default is case sensitive.
1716 # case sensitive local part will miss out on valid email when some person or system
1717 # mistakenly capitalizes things.
1718 auth_username_format = %Lu
1721 # make 147 only listen on localhost, plan to use for nextcloud.
1722 # copied from mailinabox
1723 service imap-login {
1724 inet_listener imap {
1728 # https://www.exim.org/exim-html-current/doc/html/spec_html/ch-the_dovecot_authenticator.html
1730 unix_listener auth-client {
1738 sieve_before = /etc/dovecot/sieve-spam.sieve
1740 sieve = /m/sieve/%d/%n.sieve
1741 sieve_dir = /m/sieve/%d/%n
1745 # all taken from mailinabox.
1746 mail_location = maildir:/m/md/%d/%n
1748 mail_privileged_group = mail
1749 # By default Dovecot allows users to log in only with UID numbers 500 and above. mail is 8
1752 # todo: test these changes in the universal config
1753 # mailboxes taken from mailinabox but removed
1754 # settings duplicate to defaults
1773 special_use = \Archive
1777 auth_mechanisms = plain login
1780 i
/etc
/dovecot
/sieve-spam.sieve
<<'EOF'
1781 require ["regex", "fileinto", "imap4flags"];
1783 if allof (header :regex "X-Spam-Status" "^Yes") {
1789 i
/etc
/dovecot
/local.conf.ext
<<'EOF'
1792 args = /etc/dovecot/dovecot-sql.conf.ext
1796 args = /etc/dovecot/dovecot-sql.conf.ext
1801 i
/etc
/dovecot
/dovecot-sql.conf.ext
<<'EOF'
1804 # for je and bk, populated the testignore users for the relevant domains
1805 connect = /m/rc/users.sqlite
1806 default_pass_scheme = SHA512-CRYPT
1807 password_query = SELECT email as user, password FROM users WHERE email='%u';
1808 user_query = SELECT email AS user, "mail" as uid, "mail" as gid, "/m/md/%d/%n" as home FROM users WHERE email='%u';
1809 iterate_query = SELECT email AS user FROM users;
1811 m
chmod 0600 /etc
/dovecot
/dovecot-sql.conf.ext
# per Dovecot instructions
1813 # db needs to be in a www-data writable directory
1814 db
=/m
/rc
/users.sqlite
1815 if [[ ! -s $db ]]; then
1817 m sqlite3
$db <<'EOF'
1818 CREATE TABLE users (
1819 id INTEGER PRIMARY KEY AUTOINCREMENT,
1820 email TEXT NOT NULL UNIQUE,
1821 password TEXT NOT NULL,
1823 privileges TEXT NOT NULL DEFAULT '');
1826 # users.sqlite is saved into /p/c/machine_specific, so update it there!.
1828 # example of adding a user:
1829 # hash: doveadm pw -s SHA512-CRYPT -p passhere
1830 # sqlite3 /m/rc/users.sqlite <<'EOF'
1831 #insert into users (email, password) values ('testignore@bk.b8.nz', 'hash');
1833 # update users set password = 'hash' where email = 'testignore@bk.b8.nz';
1835 # this should be at the end since it requires a valid dovecot config
1836 m sievec
/etc
/dovecot
/sieve-spam.sieve
1840 # roundcube uses this
1842 chown
mail.
mail /m
/sieve
1843 m pi dovecot-managesieved
1847 # * thunderbird autoconfig setup
1849 bkdomains
=(expertpathologyreview.com amnimal.ninja
)
1850 if [[ $HOSTNAME == bk
]]; then
1851 for domain
in ${bkdomains[@]}; do
1852 m
/a
/exe
/web-conf apache2 autoconfig.
$domain
1853 dir
=/var
/www
/autoconfig.
$domain/html
/mail
1855 # taken from mailinabox
1856 i
$dir/config-v1.1.xml
<<EOF
1857 <?xml version="1.0" encoding="UTF-8"?>
1858 <clientConfig version="1.1">
1859 <emailProvider id="$domain">
1860 <domain>$domain</domain>
1862 <displayName>$domain Mail</displayName>
1863 <displayShortName>$domain</displayShortName>
1865 <incomingServer type="imap">
1866 <hostname>mail2.iankelling.org</hostname>
1868 <socketType>SSL</socketType>
1869 <username>%EMAILADDRESS%</username>
1870 <authentication>password-cleartext</authentication>
1873 <outgoingServer type="smtp">
1874 <hostname>mail2.iankelling.org</hostname>
1876 <socketType>STARTTLS</socketType>
1877 <username>%EMAILADDRESS%</username>
1878 <authentication>password-cleartext</authentication>
1879 <addThisServer>true</addThisServer>
1880 <useGlobalPreferredServer>false</useGlobalPreferredServer>
1883 <documentation url="https://$domain/">
1884 <descr lang="en">$domain website.</descr>
1889 <loginPage url="https://$domain/roundcube" />
1890 <loginPageInfo url="https://$domain/roundcube" >
1891 <username>%EMAILADDRESS%</username>
1892 <usernameField id="rcmloginuser" name="_user" />
1893 <passwordField id="rcmloginpwd" name="_pass" />
1894 <loginButton id="rcmloginsubmit" />
1897 <clientConfigUpdate url="https://autoconfig.$domain/mail/config-v1.1.xml" />
1905 if [[ $HOSTNAME == bk
]]; then
1907 # zip according to /installer
1908 # which requires adding a line to /usr/local/lib/roundcubemail/config/config.inc.php
1909 # $config['enable_installer'] = true;
1910 pi roundcube roundcube-sqlite3 php-zip apache2 php-fpm
1912 ### begin composer install
1913 # https://getcomposer.org/doc/faqs/how-to-install-composer-programmatically.md
1915 # sum="$(wget -q -O - https://composer.github.io/installer.sig)"
1916 # m php -r "copy('https://getcomposer.org/installer', 'composer-setup.php');"
1917 # if [[ $sum != $(php -r "echo hash_file('sha384', 'composer-setup.php');") ]]; then
1918 # echo 'ERROR: Invalid composer installer checksum' >&2
1919 # rm -fv composer-setup.php
1922 # m php composer-setup.php --quiet
1923 # rm -fv composer-setup.php
1924 # m mv composer.phar /usr/local/bin
1926 # the above method gets composer2, carddav plugin at least doesnt work with that
1927 # yet, it was just released 10-24-2020.
1929 m wget
-nv -N https
://getcomposer.org
/composer-1.phar
1930 chmod +x composer-1.phar
1931 ### end composer install
1933 rcdirs
=(/usr
/local
/lib
/rcexpertpath
/usr
/local
/lib
/rcninja
)
1934 ncdirs
=(/var
/www
/ncninja
)
1935 ncdirs
=(/var
/www
/ncexpertpath
/var
/www
/ncninja
)
1936 # point debian cronjob to our local install, preventing daily cron error
1938 # debian's cronjob will fail, remove both paths it uses just to be sure
1939 rm -fv /usr
/share
/roundcube
/bin
/cleandb.sh
/etc
/cron.d
/roundcube-core
1941 #### begin dl roundcube
1942 # note, im r2e subbed to https://github.com/roundcube/roundcubemail/releases.atom
1943 v
=1.4.13; f
=roundcubemail-
$v-complete.
tar.gz
1945 if [[ -e $f ]]; then
1946 timestamp
=$
(stat
-c %Y
$f)
1950 m wget
-nv -N https
://github.com
/roundcube
/roundcubemail
/releases
/download
/$v/$f
1951 new_timestamp
=$
(stat
-c %Y
$f)
1952 for rcdir
in ${rcdirs[@]}; do
1953 if [[ $timestamp != "$new_timestamp" ||
! -e "$rcdir/config/secret" ]]; then
1954 m
tar -C /usr
/local
/lib
--no-same-owner -zxf $f
1956 m
mv /usr
/local
/lib
/roundcubemail-
$v $rcdir
1959 #### end dl roundcube
1961 for ((i
=0; i
< ${#bkdomains[@]}; i
++)); do
1962 domain
=${bkdomains[i]}
1967 # copied from debians cronjob
1968 i
/etc
/cron.d
/$rcbase <<EOF
1969 # Roundcube database cleaning: finally removes all records that are
1970 # marked as deleted.
1971 0 5 * * * www-data $rcdir/bin/cleandb.sh >/dev/null
1974 m
/a
/exe
/web-conf
- apache2
$domain <<EOF
1975 Alias /roundcube $rcdir
1976 ### begin roundcube settings
1977 # taken from /etc/apache2/conf-available/roundcube.conf version 1.4.8+dfsg.1-1~bpo10+1
1979 Options +FollowSymLinks
1980 # This is needed to parse $rcdir/.htaccess.
1984 # Protecting basic directories:
1985 <Directory $rcdir/config>
1986 Options -FollowSymLinks
1989 ### end roundcube settings
1992 ### begin nextcloud settings
1993 Alias /nextcloud "$ncdir/"
1997 Options FollowSymLinks MultiViews
1999 <IfModule mod_dav.c>
2005 # based on install checker, links to
2006 # https://docs.nextcloud.com/server/19/admin_manual/issues/general_troubleshooting.html#service-discovery
2007 # their example was a bit wrong, I figured it out by adding
2008 # LogLevel warn rewrite:trace5
2009 # then watching the apache logs
2012 RewriteRule ^/\.well-known/host-meta /nextcloud/public.php?service=host-meta [QSA,L]
2013 RewriteRule ^/\.well-known/host-meta\.json /nextcloud/public.php?service=host-meta-json [QSA,L]
2014 RewriteRule ^/\.well-known/webfinger /nextcloud/public.php?service=webfinger [QSA,L]
2015 RewriteRule ^/\.well-known/carddav /nextcloud/remote.php/dav/ [R=301,L]
2016 RewriteRule ^/\.well-known/caldav /nextcloud/remote.php/dav/ [R=301,L]
2017 ### end nextcloud settings
2019 if [[ ! -e $rcdir/config
/secret
]]; then
2020 base64
</dev
/urandom |
head -c24 >$rcdir/config
/secret ||
[[ $?
== 141 ||
${PIPESTATUS[0]} == 32 ]]
2022 secret
=$
(cat $rcdir/config
/secret
)
2024 rclogdir
=/var
/log
/$rcbase
2025 rctmpdir
=/var
/tmp
/$rcbase
2026 rcdb
=/m
/rc
/$rcbase.sqlite
2027 # config from mailinabox
2028 i
$rcdir/config
/config.inc.php
<<EOF
2031 # debian creates this for us
2032 \$config['log_dir'] = '$rclogdir/';
2033 # debian also creates a temp dir, but it is under its install dir,
2034 # seems better to have our own.
2035 \$config['temp_dir'] = '$rctmpdir/';
2036 \$config['db_dsnw'] = 'sqlite:///$rcdb?mode=0640';
2037 \$config['default_host'] = 'ssl://localhost';
2038 \$config['default_port'] = 993;
2039 \$config['imap_conn_options'] = array(
2041 'verify_peer' => false,
2042 'verify_peer_name' => false,
2045 \$config['imap_timeout'] = 15;
2046 \$config['smtp_server'] = 'tls://127.0.0.1';
2047 \$config['smtp_conn_options'] = array(
2049 'verify_peer' => false,
2050 'verify_peer_name' => false,
2053 \$config['product_name'] = 'webmail';
2054 \$config['des_key'] = '$secret';
2055 \$config['plugins'] = array('archive', 'zipdownload', 'password', 'managesieve', 'jqueryui', 'carddav', 'html5_notifier');
2056 \$config['skin'] = 'elastic';
2057 \$config['login_autocomplete'] = 2;
2058 \$config['password_charset'] = 'UTF-8';
2059 \$config['junk_mbox'] = 'Spam';
2060 # disable builtin addressbook
2061 \$config['address_book_type'] = '';
2065 m mkdir
-p $rclogdir
2066 m
chmod 750 $rclogdir
2067 m chown www-data
:adm
$rclogdir
2068 # note: subscribed to updates:
2069 # r2e add rcmcarddav https://github.com/blind-coder/rcmcarddav/commits/master.atom ian@iankelling.org
2070 # r2e add roundcube https://github.com/roundcube/roundcubemail/releases.atom ian@iankelling.org
2071 m mkdir
-p $rctmpdir /m
/rc
2072 m chown
-R www-data.www-data
$rctmpdir /m
/rc
2073 m
chmod 750 $rctmpdir
2074 # Ensure the log file monitored by fail2ban exists, or else fail2ban can't start.
2075 # todo: check for other mailinabox things
2076 m sudo
-u www-data
touch $rclogdir/errors.log
2078 #### begin carddav install
2079 # This is the official roundcube carddav repo.
2080 # Install doc suggests downloading with composer, but that
2081 # didnt work, it said some ldap package for roundcube was missing,
2082 # but I dont want to download some extra ldap thing.
2083 # https://github.com/blind-coder/rcmcarddav/blob/master/doc/INSTALL.md
2084 verf
=$rcdir/plugins
/carddav
/myversion
2088 if [[ -e $verf ]]; then
2089 if [[ $
(cat $verf) != "$v" ]]; then
2097 m
rm -rf $rcdir/plugins
/carddav
2099 m wget
-nv -O $tmpd/t.tgz https
://github.com
/blind-coder
/rcmcarddav
/releases
/download
/v
$v/carddav-v
$v.tgz
2103 m chown
-R www-data
:www-data
$rcdir/plugins
/carddav
2104 m
cd $rcdir/plugins
/carddav
2106 m sudo
-u www-data composer-1.phar update
--no-dev
2108 m sudo
-u www-data composer-1.phar
install --no-dev
2110 m chown
-R root
:root
$rcdir/plugins
/carddav
2114 # So, strangely, this worked in initial testing, but then
2115 # on first run it wouldn't show the existing contacts until
2116 # I went into the carddav settings and did "force immediate sync",
2117 # which seemed to fix things. Note, some of these settings
2118 # get initalized per/addressbook in the db, then need changing
2119 # there or through the settings menu.
2121 # About categories, see https://www.davx5.com/tested-with/nextcloud
2122 # https://github.com/blind-coder/rcmcarddav/blob/master/doc/GROUPS.md
2123 i
$rcdir/plugins
/carddav
/config.inc.php
<<EOF;
2125 \$prefs['_GLOBAL']['hide_preferences'] = false;
2126 \$prefs['davserver'] = array(
2127 # name in the UI is kind of dumb. This is just something short that seems to fit ok.
2129 'username' => '%u', // login username
2130 'password' => '%p', // login password
2131 'url' => 'https://$domain/nextcloud/remote.php/dav/addressbooks/users/%u/contacts',
2133 'readonly' => false,
2134 'refresh_time' => '00:10:00',
2135 'fixed' => array('username','password'),
2136 'use_categories' => false,
2141 #### end carddav install
2144 if [[ ! -d html5_notifier
]]; then
2145 m git clone https
://github.com
/stremlau
/html5_notifier
2147 cd $rcdir/plugins
/html5_notifier
2150 # todo: try out roundcube plugins: thunderbird labels
2152 # Password changing plugin settings
2153 cat $rcdir/plugins
/password
/config.inc.php.dist
- >$rcdir/plugins
/password
/config.inc.php
<<'EOF'
2154 # following are from mailinabox
2155 $config['password_minimum_length'] = 8;
2156 $config['password_db_dsn'] = 'sqlite:////m/rc/users.sqlite';
2157 $config['password_query'] = 'UPDATE users SET password=%D WHERE email=%u';
2158 $config['password_dovecotpw'] = '/usr/bin/doveadm pw';
2159 $config['password_dovecotpw_method'] = 'SHA512-CRYPT';
2160 $config['password_dovecotpw_with_method'] = true;
2162 # so PHP can use doveadm, for the password changing plugin
2163 m usermod
-a -G dovecot www-data
2164 m usermod
-a -G mail $u
2166 # so php can update passwords
2167 m chown www-data
:dovecot
/m
/rc
/users.sqlite
2168 m
chmod 664 /m
/rc
/users.sqlite
2170 # Run Roundcube database migration script (database is created if it does not exist)
2171 m
$rcdir/bin
/updatedb.sh
--dir $rcdir/SQL
--package roundcube
2172 m chown www-data
:www-data
$rcdb
2174 done # end loop over domains and rcdirs
2176 ### begin php setup for rc ###
2177 # Enable PHP modules.
2178 m phpenmod
-v php mcrypt imap
2179 # dpkg says this is required
2180 m a2enmod proxy_fcgi setenvif
2181 fpm
=$
(dpkg-query
-s php-fpm |
sed -nr 's/^Depends:.* (php[^ ]*-fpm)( .*|$)/\1/p') # eg: php7.4-fpm
2182 phpver
=$
(dpkg-query
-s php-fpm |
sed -nr 's/^Depends:.* php([^ ]*)-fpm( .*|$)/\1/p')
2184 # 3 useless guides on php fpm fcgi debian 10 later, i figure out from reading
2185 # /etc/apache2/conf-enabled/php7.3-fpm.conf
2186 m a2dismod php
$phpver
2187 # according to /install, we should set date.timezone,
2188 # but that is dumb, the system already has the right zone in
2189 # $rclogdir/errors.log
2190 # todo: consider other settings in
2191 # /a/opt/mailinabox/setup/nextcloud.sh
2192 i
/etc
/php
/$phpver/cli
/conf.d
/30-local.ini
<<'EOF'
2196 i
/etc
/php
/$phpver/fpm
/conf.d
/30-local.ini
<<'EOF'
2197 date.timezone = "America/New_York"
2199 upload_max_filesize = 2000M
2200 post_max_size = 2000M
2201 # install checker, nextcloud/settings/admin/overview
2204 m systemctl restart
$fpm
2205 # dunno if reload/restart is needed
2206 m systemctl reload apache2
2207 # note bk backups are defined in crontab outside this file
2208 ### end php setup for rc ###
2210 fi # end roundcube setup
2214 if [[ $HOSTNAME == bk
]]; then
2215 # from install checker, nextcloud/settings/admin/overview and
2216 # https://docs.nextcloud.com/server/19/admin_manual/installation/source_installation.html
2217 # curl from the web installer requirement, but i switched to cli
2218 # it recommends php-file info, but that is part of php7.3-common, already got installed
2220 m pi php-curl php-bz2 php-gmp php-bcmath php-imagick php-apcu
2222 # https://docs.nextcloud.com/server/19/admin_manual/installation/source_installation.html
2223 cat >/etc
/php
/$phpver/fpm
/pool.d
/localwww.conf
<<'EOF'
2228 for ((i
=0; i
< ${#bkdomains[@]}; i
++)); do
2229 domain
=${bkdomains[i]}
2233 if [[ ! -e $ncdir/index.php
]]; then
2234 # if we wanted to only install a specific version, use something like
2235 # file=latest-22.zip
2237 m wget
-nv -N https
://download.nextcloud.com
/server
/releases
/$file
2241 m chown
-R www-data.www-data nextcloud
2242 m
mv nextcloud
$ncdir
2244 m sudo
-u www-data php occ maintenance
:install --database sqlite
--admin-user iank
--admin-pass $nextcloud_admin_pass
2246 # note, strange this happend where updater did not increment the version var,
2247 # mine was stuck on 20. I manually updated it.
2249 if [[ ! -e config.php-orig
]]; then
2250 m
cp -a config.php config.php-orig
2252 cat config.php-orig
- >tmp.php
<<EOF
2253 # https://docs.nextcloud.com/server/19/admin_manual/configuration_server/email_configuration.html
2254 \$CONFIG["mail_smtpmode"] = "sendmail";
2255 \$CONFIG["mail_smtphost"] = "127.0.0.1";
2256 \$CONFIG["mail_smtpport"] = 25;
2257 \$CONFIG["mail_smtptimeout"] = 10;
2258 \$CONFIG["mail_smtpsecure"] = "";
2259 \$CONFIG["mail_smtpauth"] = false;
2260 \$CONFIG["mail_smtpauthtype"] = "LOGIN";
2261 \$CONFIG["mail_smtpname"] = "";
2262 \$CONFIG["mail_smtppassword"] = "";
2263 \$CONFIG["mail_domain"] = "$domain";
2265 # https://github.com/nextcloud/user_external#readme
2266 # plus mailinabox example
2267 #\$CONFIG['user_backends'] = array(array('class' => 'OC_User_IMAP','arguments' => array('127.0.0.1', 143, null),),);
2270 # based on installer check
2271 # https://docs.nextcloud.com/server/19/admin_manual/configuration_server/caching_configuration.html
2272 \$CONFIG['memcache.local'] = '\OC\Memcache\APCu';
2274 \$CONFIG['overwrite.cli.url'] = 'https://$domain/nextcloud';
2275 \$CONFIG['htaccess.RewriteBase'] = '/nextcloud';
2276 \$CONFIG['trusted_domains'] = array (
2280 fwrite(STDOUT, "<?php\n\\\$CONFIG = ");
2281 var_export(\$CONFIG);
2282 fwrite(STDOUT, ";\n");
2284 m php tmp.php
>config.php
2286 m sudo
-u www-data php
$ncdir/occ maintenance
:update
:htaccess
2287 list
=$
(sudo
-u www-data php
$ncdir/occ
--output=json_pretty app
:list
)
2288 # user_external not compaible with nc 23
2289 for app
in contacts calendar
; do
2290 if [[ $
(printf "%s\n" "$list"| jq
".enabled.$app") == null
]]; then
2291 m sudo
-u www-data php
$ncdir/occ app
:install $app
2294 i
/etc
/systemd
/system
/$ncbase.service
<<EOF
2296 Description=ncup $ncbase
2297 After=multi-user.target
2301 ExecStart=/usr/local/bin/ncup $ncbase
2303 IOSchedulingClass=idle
2304 CPUSchedulingPolicy=idle
2306 i
/etc
/systemd
/system
/$ncbase.timer
<<EOF
2308 Description=ncup $ncbase timer
2314 WantedBy=timers.target
2316 systemctl
enable --now $ncbase.timer
2317 i
/usr
/local
/bin
/ncup
<<'EOFOUTER'
2319 if ! test "$BASH_VERSION"; then echo "error: shell is not bash" >&2; exit 1; fi
2320 shopt -s inherit_errexit 2>/dev/null ||: # ignore fail in bash < 4.4
2322 trap 'echo "$0:$LINENO:error: \"$BASH_COMMAND\" exit status: $?, PIPESTATUS: ${PIPESTATUS[*]}" >&2' ERR
2325 if ! php /var/www/$ncbase/updater/updater.phar -n; then
2326 echo failed nextcloud update for $ncbase >&2
2328 To: alerts@iankelling.org
2329 From: root@$(hostname -f)
2330 Subject: failed nextcloud update for $ncbase
2332 For logs, run: jr -u $ncbase
2336 chmod +x
/usr
/local
/bin
/ncup
2338 mkdir
-p /var
/www
/cron-errors
2339 chown www-data.www-data
/var
/www
/cron-errors
2340 i
/etc
/cron.d
/$ncbase <<EOF
2341 PATH=/usr/sbin:/sbin:/usr/bin:/bin:/usr/local/bin
2343 # https://docs.nextcloud.com/server/20/admin_manual/configuration_server/background_jobs_configuration.html
2344 */5 * * * * www-data php -f $ncdir/cron.php --define apc.enable_cli=1 |& log-once nccron
2351 # * exim host conditional config
2355 all_dirs
=(/p
/c
/filesystem
)
2356 for x
in /p
/c
/machine_specific
/*.hosts
/a
/bin
/ds
/machine_specific
/*.hosts
; do
2357 if grep -qxF $HOSTNAME $x; then all_dirs
+=( ${x%.hosts} ); fi
2360 for d
in ${all_dirs[@]}; do
2361 f
=$d/etc
/exim
4/passwd
2362 if [[ -e $f ]]; then
2365 tmp
=($d/etc
/exim
4/*.pem
)
2366 if (( ${#tmp[@]} )); then
2371 if (( ${#files[@]} )); then
2372 sudo rsync
-ahhi --chown=root
:Debian-exim
--chmod=0640 ${files[@]} /etc
/exim
4/
2380 # avoid accepting mail for invalid users
2381 # https://wiki.dovecot.org/LMTP/Exim
2382 cat >>/etc
/exim
4/conf.d
/rcpt_local_acl
<<'EOF'
2384 message = invalid recipient
2385 domains = +local_domains
2386 !verify = recipient/callout=no_cache
2388 i
/etc
/exim
4/conf.d
/auth
/29_exim4-config_auth
<<'EOF'
2392 server_socket = /var/run/dovecot/auth-client
2393 server_set_id = $auth1
2398 i
/etc
/exim
4/conf.d
/auth
/29_exim4-config_auth
<<'EOF'
2399 # from 30_exim4-config_examples
2403 server_condition = "${if crypteq{$auth3}{${extract{1}{:}{${lookup{$auth2}lsearch{CONFDIR/passwd}{$value}{*:*}}}}}{1}{0}}"
2404 server_set_id = $auth2
2406 .ifndef AUTH_SERVER_ALLOW_NOTLS_PASSWORDS
2407 server_advertise_condition = ${if eq{$tls_in_cipher}{}{}{*}}
2412 # ** exim: main daemon use non-default config file
2415 # to see the default comments in /etc/default/exim4:
2416 # s update-exim4defaults --force --init
2417 # which will overwrite any existing file
2418 i
/etc
/default
/exim4
<<'EOF'
2419 QUEUERUNNER='combined'
2421 COMMONOPTIONS='-C /etc/exim4/my.conf'
2422 UPEX4OPTS='-o /etc/exim4/my.conf'
2423 # i use epanic-clean for alerting if there are bad paniclog entries
2424 E4BCD_WATCH_PANICLOG='no'
2426 chown Debian-exim
:Debian-exim
/usr
/sbin
/exim4
2427 # needs guid set in order to become Debian-exim
2428 chmod g
+s
,u
+s
/usr
/sbin
/exim4
2429 i
/etc
/exim
4/trusted_configs
<<'EOF'
2435 i
/etc
/default
/exim4
<<'EOF'
2436 QUEUERUNNER='combined'
2446 # no reason to expect it to ever be there.
2447 rm -fv /etc
/systemd
/system
/exim4.service.d
/nonroot.conf
2451 for d
in /a
/d
/m
/media
/mnt
/nocow
/o
/p
/q
; do
2452 if [[ -d $d ]]; then
2456 i
/etc
/systemd
/system
/exim4.service.d
/nonroot.conf
<<EOF
2458 # see 56.2 Root privilege in exim spec
2459 AmbientCapabilities=CAP_NET_BIND_SERVICE
2460 # https://www.redhat.com/sysadmin/mastering-systemd
2461 # things that seem good and reasonabl.e
2464 # note, in t10 systemd, if one of these is an sshfs mountpoint,
2465 # this whole setting doesnt work. tried it with a newer systemd 250 though
2466 # an nspawn, and it worked there.
2467 InaccessiblePaths=${dirs[@]}
2471 # when we get newer systemd
2474 i
/etc
/exim
4/conf.d
/main
/000_local-noroot
<<'EOF'
2475 # see 56.2 Root privilege in exim spec
2476 deliver_drop_privilege = true
2479 300_exim4-config_real_local
2480 600_exim4-config_userforward
2481 700_exim4-config_procmail
2482 800_exim4-config_maildrop
2485 for f
in ${files[@]}; do
2486 echo "# iank: removed due to running nonroot"|i
/etc
/exim
4/conf.d
/router
/$f
2493 # ** $MAIL_HOST|bk|je)
2496 echo|i
/etc
/exim
4/conf.d
/router
/870_backup_local
2498 cat >>/etc
/exim
4/update-exim4.conf.conf
<<EOF
2499 # note: some things we don't set that are here by default because they are unused.
2500 dc_local_interfaces=''
2501 dc_eximconfig_configtype='internet'
2502 dc_localdelivery='dovecot_lmtp'
2504 cat >>/etc
/exim
4/conf.d
/main
/000_local
<<EOF
2505 # recommended if dns is expected to work
2506 CHECK_RCPT_VERIFY_SENDER = true
2507 # default config comment says: If you enable this, you might reject legitimate mail,
2508 # but eggs has had this a long time, so that seems unlikely.
2509 CHECK_RCPT_SPF = true
2510 CHECK_RCPT_REVERSE_DNS = true
2511 CHECK_MAIL_HELO_ISSUED = true
2514 CHECK_DATA_LOCAL_ACL_FILE = /etc/exim4/conf.d/data_local_acl
2515 CHECK_RCPT_LOCAL_ACL_FILE = /etc/exim4/conf.d/rcpt_local_acl
2518 #dmarc_tld_file = /etc/public_suffix_list.dat
2526 cat >>/etc
/exim
4/conf.d
/main
/000_local
<<EOF
2527 # je.b8.nz will run out of memory with freshclam
2528 av_scanner = clamd:/var/run/clamav/clamd.ctl
2531 cat >> /etc
/exim
4/conf.d
/data_local_acl
<<'EOF'
2533 malware = */defer_ok
2534 !condition = ${if match {$malware_name}{\N^Heuristic\N}}
2535 message = This message was detected as possible malware ($malware_name).
2538 cat >/etc
/exim
4/conf.d
/main
/000_local-nn
<<EOF
2539 # MAIN_HARDCODE_PRIMARY_HOSTNAME might mess up the
2540 # smarthost config type, not sure.
2541 # failing message on mail-tester.com:
2542 # We check if there is a server (A Record) behind your hostname kd.
2543 # You may want to publish a DNS record (A type) for the hostname kd or use a different hostname in your mail software
2544 # https://serverfault.com/questions/46545/how-do-i-change-exim4s-primary-hostname-on-a-debian-box
2545 # and this one seemed appropriate from grepping config.
2546 # I originally set this to li.iankelling.org, but then ended up with errors when li tried to send
2547 # mail to kd, so this should basically be a name that no host has as their
2548 # canonical hostname since the actual host sits behind a nat and changes.
2549 MAIN_HARDCODE_PRIMARY_HOSTNAME = mail.iankelling.org
2550 # I used this to avoid sender verification, didnt work but it still
2551 # makes sense based on the spec.
2552 hosts_treat_as_local = defaultnn.b8.nz
2554 # Outside nn, we get the default cert location from a debian macro,
2555 # and the cert file is put in place by a certbot hook.
2556 MAIN_TLS_CERTIFICATE = /etc/exim4/fullchain.pem
2557 MAIN_TLS_PRIVATEKEY = /etc/exim4/privkey.pem
2560 i
/etc
/exim
4/conf.d
/router
/190_exim4-config_fsfsmarthost
<<'EOF'
2562 debug_print = "R: smarthost for $local_part@$domain"
2563 driver = manualroute
2564 domains = ! +local_domains
2565 # send most mail through eggs, helps fsfs sender reputation.
2566 # uncomment and optionally move to 188 file to send through my own servers again
2568 transport = smarthost_dkim
2569 route_list = * fencepost.gnu.org::587 byname
2570 host_find_failed = ignore
2571 same_domain_copy_routing = yes
2575 /a
/exe
/cedit defaultnn
/etc
/hosts
<<'EOF' || [[ $? == 1 ]]
2576 10.173.8.1 defaultnn.b8.nz
2582 i
/etc
/exim
4/conf.d
/router
/195_dnslookup_vpn
<<'EOF'
2583 # copied from /etc/exim4/conf.d/router/200_exim4-config_primary, but
2584 # use vpn transport. lower priority so it overrides the default route.
2585 # Use this in case our vpn fails, we dont send anything without it.
2586 .ifdef DCconfig_internet
2588 debug_print = "R: dnslookup for $local_part@$domain"
2590 domains = ! +local_domains
2591 transport = remote_smtp_vpn
2592 same_domain_copy_routing = yes
2593 ignore_target_hosts = <; 0.0.0.0 ; 127.0.0.0/8 ; 192.168.0.0/16 ; 172.16.0.0/12 ; 10.0.0.0/8 ; 169.254.0.0/16 ; 255.255.255.255 ; ::/128 ; ::1/128 ; fc00::/7 ; fe80::/10 ; 100::/64
2599 # note on backups: I used to do an automatic sshfs and restricted
2600 # permissions to a specific directory on the remote server, /bu/mnt,
2601 # which required using a dedicated user, but realized smtp will be
2602 # more reliable and less fuss. If I ever need that again, see the
2603 # history of this file, and bum in brc2.
2605 i
/etc
/exim
4/conf.d
/router
/890_backup_copy
<<EOF
2606 ### router/900_exim4-config_local_user
2607 #################################
2609 # todo, it would be nice to save sent email too,
2610 # but its not so important, they still exist in my head
2614 domains = +local_domains
2615 # b is just an arbirary short string
2616 data = b@eximbackup.b8.nz
2617 # note, to test this, i could temporarily allow testignore.
2618 # alerts avoids potential mail loop. root is already
2619 # redirected earlier, so that is just being overly cautious.
2620 local_parts = ! root : ! testignore : ! alerts
2624 driver = manualroute
2625 domains = eximbackup.b8.nz
2626 transport = backup_remote
2627 ignore_target_hosts = ${HOSTNAME}wg.b8.nz
2628 # note changes here also require change in passwd.client
2629 route_list = * eximbackup.b8.nz
2630 same_domain_copy_routing = yes
2631 errors_to = alerts@iankelling.org
2636 i
/etc
/exim
4/conf.d
/transport
/30_backup_remote
<<'EOF'
2640 .ifndef IGNORE_SMTP_LINE_LENGTH_LIMIT
2641 message_size_limit = ${if > {$max_received_linelength}{998} {1}{0}}
2643 hosts_require_auth = *
2646 # manual return path because we want it to be the envelope sender
2647 # we got not the one we are using in this smtp transport
2648 headers_add = "Return-path: $sender_address"
2649 .ifdef REMOTE_SMTP_SMARTHOST_HOSTS_AVOID_TLS
2650 hosts_avoid_tls = REMOTE_SMTP_SMARTHOST_HOSTS_AVOID_TLS
2652 .ifdef REMOTE_SMTP_SMARTHOST_HOSTS_REQUIRE_TLS
2653 hosts_require_tls = REMOTE_SMTP_SMARTHOST_HOSTS_REQUIRE_TLS
2655 .ifdef REMOTE_SMTP_SMARTHOST_TLS_VERIFY_CERTIFICATES
2656 tls_verify_certificates = REMOTE_SMTP_SMARTHOST_TLS_VERIFY_CERTIFICATES
2658 .ifdef REMOTE_SMTP_SMARTHOST_TLS_VERIFY_HOSTS
2659 tls_verify_hosts = REMOTE_SMTP_SMARTHOST_TLS_VERIFY_HOST
2661 .ifdef REMOTE_SMTP_HEADERS_REWRITE
2662 headers_rewrite = REMOTE_SMTP_HEADERS_REWRITE
2664 .ifdef REMOTE_SMTP_HELO_DATA
2665 helo_data=REMOTE_SMTP_HELO_DATA
2667 .ifdef TLS_DH_MIN_BITS
2668 tls_dh_min_bits = TLS_DH_MIN_BITS
2670 .ifdef REMOTE_SMTP_SMARTHOST_TLS_CERTIFICATE
2671 tls_certificate = REMOTE_SMTP_SMARTHOST_TLS_CERTIFICATE
2673 .ifdef REMOTE_SMTP_SMARTHOST_PRIVATEKEY
2674 tls_privatekey = REMOTE_SMTP_SMARTHOST_PRIVATEKEY
2676 .ifdef REMOTE_SMTP_TRANSPORTS_HEADERS_REMOVE
2677 headers_remove = REMOTE_SMTP_TRANSPORTS_HEADERS_REMOVE
2682 # this avoids some error. i cant remember what. todo:
2683 # test it out and document why/if its needed.
2684 # i /etc/exim4/host_local_deny_exceptions <<'EOF'
2689 # cron email from smarthost hosts will automatically be to
2690 # USER@FQDN. I redirect that to alerts@, on the smarthosts, but in
2691 # case that doesn't work, we still want to accept that mail, but not
2692 # from any host except the smarthosts. local_hostnames and this rule
2693 # is for that purpose.
2694 i
/etc
/exim
4/conf.d
/rcpt_local_acl
<<'EOF'
2697 domains = +local_hostnames
2700 echo|i
/etc
/exim
4/conf.d
/router
/880_universal_forward
2703 cat >>/etc
/exim
4/conf.d
/main
/000_local
<<EOF
2704 MAILDIR_HOME_MAILDIR_LOCATION = /m/md/Sent
2707 # for iank@fsf.org, i have mail.fsf.org forward it to fsf@iankelling.org.
2708 # and also have mail.iankelling.org whitelisted as a relay domain.
2709 # I could avoid that if I changed this to submit to 587 with a
2710 # password like a standard mua.
2711 i
/etc
/exim
4/conf.d
/router
/188_exim4-config_smarthost
<<'EOF'
2712 # ian: save a copy of sent mail. i thought of other ways to
2713 # do this, for example, to only save sent mail that is not sent
2714 # from my mail client which saves a copy by default, but in the
2715 # end, it seems simplest to turn that off. We want to save
2716 # external mail sent by smarthosts.
2719 domains = ! +local_domains
2720 condition = ${if !bool{${lookup{$local_part@$domain}lsearch{/etc/exim4/ignore-sent}{true}}}}
2721 data = vojdedIdNejyebni@b8.nz
2724 # ian: copied from /etc/exim4/conf.d/router/200_exim4-config_primary, and added senders = and
2725 # replaced DCsmarthost with hostname
2727 debug_print = "R: smarthost for $local_part@$domain"
2728 driver = manualroute
2729 domains = ! +local_domains
2731 transport = remote_smtp_smarthost
2732 route_list = * mail.fsf.org::587 byname
2733 host_find_failed = ignore
2734 same_domain_copy_routing = yes
2738 debug_print = "R: smarthost for $local_part@$domain"
2739 driver = manualroute
2740 domains = ! +local_domains
2741 senders = *@posteo.net
2742 transport = remote_smtp_smarthost
2743 route_list = * posteo.de::587 byname
2744 host_find_failed = ignore
2745 same_domain_copy_routing = yes
2749 # Greping /etc/exim4, unqualified mails this would end up as
2750 # a return path, so it should go somewhere we will see.
2751 # The debconf output about mailname is as follows:
2752 # The 'mail name' is the domain name used to 'qualify' mail addresses without a domain
2754 # This name will also be used by other programs. It should be the single, fully
2755 # qualified domain name (FQDN).
2756 # Thus, if a mail address on the local host is foo@example.org, the correct value for
2757 # this option would be example.org.
2758 # This name won\'t appear on From: lines of outgoing messages if rewriting is enabled.
2759 echo iankelling.org
> /etc
/mailname
2762 # mail.iankelling.org so local imap clients can connect with tls and
2763 # when they happen to not be local.
2764 # todo: this should be 10.8.0.4
2766 /a
/exe
/cedit nn
/etc
/hosts
<<'EOF' || [[ $? == 1 ]]
2767 # note: i put nn.b8.nz into bind for good measure
2768 10.173.8.2 nn.b8.nz mx.iankelling.org
2771 # note: systemd-resolved will consult /etc/hosts, dnsmasq wont. this assumes
2772 # weve configured this file in dnsmasq if we are using it.
2773 /a
/exe
/cedit
mail /etc
/dnsmasq-servers.conf
<<'EOF' || [[ $? == 1 ]]
2774 server=/mx.iankelling.org/127.0.1.1
2776 # I used to use debconf-set-selections + dpkg-reconfigure,
2777 # which then updates this file
2778 # but the process is slower than updating it directly and then I want to set other things in
2779 # update-exim4.conf.conf, so there's no point.
2780 # The file is documented in man update-exim4.conf,
2781 # except the man page is not perfect, read the bash script to be sure about things.
2783 # The debconf questions output is additional documentation that is not
2784 # easily accessible, but super long, along with the initial default comment in this
2785 # file, so I've saved that into ./mail-notes.conf.
2787 # # TODO: remove mx.iankelling.org once systems get updated mail-setup from jan 2022
2788 cat >>/etc
/exim
4/update-exim4.conf.conf
<<EOF
2789 # man page: is used to build the local_domains list, together with "localhost"
2790 # this is duplicated in a later router.
2791 dc_other_hostnames='iankelling.org;zroe.org;r2e.iankelling.org;mx.iankelling.org;!je.b8.nz;!bk.b8.nz;*.b8.nz;b8.nz'
2795 # dmarc. not used currently
2796 f
=/etc
/cron.daily
/refresh-dmarc-tld-file
2800 wget -q -N https://publicsuffix.org/list/public_suffix_list.dat
2806 ## we use this host to monitor MAIL_HOST and host a mail server for someone
2809 echo|i
/etc
/exim
4/conf.d
/rcpt_local_acl
2810 echo|i
/etc
/exim
4/conf.d
/router
/880_universal_forward
2812 /a
/exe
/cedit nn
/etc
/hosts
<<'EOF' || [[ $? == 1 ]]
2816 sed -r -f - /etc
/init.d
/exim4
<<'EOF' | i /etc/init.d/exim4in
2817 s,/etc/default/exim4,/etc/default/exim4in,g
2818 s,/run/exim4/exim.pid,/run/exim4/eximin.pid,g
2819 s,(^[ #]*Provides:).*,\1 exim4in,
2820 s,(^[ #]*NAME=).*,\1"exim4in",
2822 chmod +x
/etc
/init.d
/exim4in
2823 i
/etc
/systemd
/system
/exim4in.service.d
/alwaysrestart.conf
<<'EOF'
2825 # needed to continually restart
2826 StartLimitIntervalSec=0
2830 # time to sleep before restarting a service
2834 i
/etc
/default
/exim4in
<<'EOF'
2835 # defaults but no queue runner and alternate config dir
2837 COMMONOPTIONS='-oP /run/exim4/eximin.pid'
2838 UPEX4OPTS='-d /etc/myexim4'
2841 echo bk.b8.nz
> /etc
/mailname
2842 cat >>/etc
/exim
4/update-exim4.conf.conf
<<EOF
2843 # man page: is used to build the local_domains list, together with "localhost"
2844 dc_other_hostnames='amnimal.ninja;expertpathologyreview.com;bk.b8.nz'
2850 echo je.b8.nz
> /etc
/mailname
2851 cat >>/etc
/exim
4/update-exim4.conf.conf
<<EOF
2852 dc_other_hostnames='je.b8.nz'
2854 echo|i
/etc
/exim
4/conf.d
/router
/188_exim4-config_smarthost
2855 echo|i
/etc
/exim
4/conf.d
/router
/190_exim4-config_fsfsmarthost
2856 echo|i
/etc
/exim
4/conf.d
/rcpt_local_acl
2857 echo|i
/etc
/exim
4/conf.d
/router
/880_universal_forward
2859 # ** not MAIL_HOST|bk|je
2861 # this one should be removed for all non mail hosts, but
2862 # bk and je never become mail_host
2863 echo|i
/etc
/exim
4/conf.d
/router
/195_dnslookup_vpn
2865 echo|i
/etc
/exim
4/conf.d
/router
/188_exim4-config_smarthost
2866 echo|i
/etc
/exim
4/conf.d
/router
/190_exim4-config_fsfsmarthost
2867 echo|i
/etc
/exim
4/conf.d
/rcpt_local_acl
2868 echo|i
/etc
/exim
4/conf.d
/router
/890_backup_copy
2869 echo|i
/etc
/exim
4/conf.d
/main
/000_local-nn
2873 cat >>/etc
/exim
4/conf.d
/main
/000_local
<<EOF
2874 MAIN_TLS_CERTIFICATE = /etc/exim4/certs/$wghost/fullchain.pem
2875 MAIN_TLS_PRIVATEKEY = /etc/exim4/certs/$wghost/privkey.pem
2876 # so we can maintiain the originals of the backups.
2877 # we wouldnt want this if we were dealing with any other
2878 # local deliveries, but we sent all others to the smarthost
2879 # which then strips the headers.
2880 envelope_to_remove = false
2881 return_path_remove = false
2885 # catches things like cronjob email
2886 i
/etc
/exim
4/conf.d
/router
/880_universal_forward
<<'EOF'
2889 domains = +local_domains
2890 data = alerts@iankelling.org
2894 for unit
in ${nn_progs[@]}; do
2895 f
=/etc
/systemd
/system
/$unit.service.d
/nn.conf
2899 # dont i dont care if defaultnn section gets left, it wont
2901 echo |
/a
/exe
/cedit nn
/etc
/hosts ||
[[ $?
== 1 ]]
2902 echo |
/a
/exe
/cedit
mail /etc
/dnsmasq-servers.conf ||
[[ $?
== 1 ]]
2907 install -d -g Debian-exim
-o Debian-exim
-m 771 /bu
/md
2908 if [[ -e /bu
/md
/cur
&& $
(stat
-c %u
/bu
/md
/cur
) == 1000 ]]; then
2909 chown
-R Debian-exim
:Debian-exim
/bu
/md
2911 i
/etc
/exim
4/conf.d
/transport
/30_backup_maildir
<<EOF
2912 # modified debian maildir transport
2917 # note, no return path or envelope added
2919 directory_mode = 0700
2921 mode_fail_narrower = false
2924 i
/etc
/exim
4/conf.d
/router
/870_backup_local
<<'EOF'
2925 ### router/900_exim4-config_local_user
2926 #################################
2929 debug_print = "R: local_user for $local_part@$domain"
2931 domains = eximbackup.b8.nz
2932 transport = backup_maildir
2935 # Bind to wghole to receive mailbackup.
2936 wgholeip
=$
(sed -rn 's/^ *Address *= *([^/]+).*/\1/p' /etc
/wireguard
/wghole.conf
)
2937 cat >>/etc
/exim
4/update-exim4.conf.conf
<<EOF
2938 dc_other_hostnames='eximbackup.b8.nz'
2939 dc_local_interfaces='127.0.0.1;::1;$wgholeip'
2942 # wghole & thus exim will fail to start without internet connectivity.
2943 i
/etc
/systemd
/system
/exim4.service.d
/backup.conf
<<'EOF'
2945 StartLimitIntervalSec=0
2953 cat >>/etc
/exim
4/update-exim4.conf.conf
<<EOF
2954 # Note: If theres like a temporary problem where mail gets sent to
2955 # one of these hosts, if exim isnt listening, it will be a temporary error
2956 # instead of a permanent 5xx.
2957 dc_local_interfaces='127.0.0.1;::1'
2959 rm -fv /etc
/systemd
/system
/exim4.service.d
/backup.conf
2961 cat >>/etc
/exim
4/update-exim4.conf.conf
<<EOF
2962 dc_eximconfig_configtype='smarthost'
2963 dc_smarthost='$smarthost'
2966 hostname
-f |i
/etc
/mailname
2967 cat >>/etc
/exim
4/update-exim4.conf.conf
<<EOF
2968 # The manpage incorrectly states this will do header rewriting, but
2969 # that only happens if we have dc_hide_mailname is set.
2970 dc_readhost='iankelling.org'
2971 # Only used in case of bounces.
2972 dc_localdelivery='maildir_home'
2980 # ** $MAILHOST|bk, things that belong at the end
2983 # config for the non-nn exim
2984 m rsync
-ra --delete /etc
/exim
4/ /etc
/myexim4
2985 cat >>/etc
/myexim
4/conf.d
/main
/000_local-nn
<<'EOF'
2986 # this makes it easier to see which exim is doing what
2987 log_file_path = /var/log/exim4/my%s
2990 cat >/etc
/logrotate.d
/myexim
<<'EOF'
2991 /var/log/exim4/mymain /var/log/exim4/myreject {
2999 /var/log/exim4/mypanic {
3010 # If we ever wanted to have a separate spool,
3011 # we could do it like this.
3012 # cat >>/etc/exim4/conf.d/main/000_local-nn <<'EOF'
3013 # spool_directory = /var/spool/myexim4
3015 cat >>/etc
/myexim
4/update-exim4.conf.conf
<<'EOF'
3016 dc_eximconfig_configtype='smarthost'
3017 dc_smarthost='nn.b8.nz'
3022 # config for the non-nn exim
3023 cat >/etc
/myexim
4/conf.d
/main
/000_local-nn
<<'EOF'
3024 MAIN_HARDCODE_PRIMARY_HOSTNAME = mail2.iankelling.org
3028 # for bk, we have a exim4in.service that will do this for us.
3029 m update-exim4.conf
-d /etc
/myexim4
3035 # ** bind mount setup
3036 # put spool dir in directory that spans multiple distros.
3037 # based on http://www.postfix.org/qmgr.8.html and my notes in gnus
3040 sdir
=/var
/spool
/exim4
3041 # we only do this if our system has $dir
3043 # this used to do a symlink, but, in the boot logs, /nocow would get mounted succesfully,
3044 # about 2 seconds later, exim starts, and immediately puts into paniclog:
3045 # honVi-0000u3-82 Failed to create directory "/var/spool/exim4/input": No such file or directory
3046 # so, im trying a bind mount to get rid of that.
3047 if [[ -e /nocow
]]; then
3048 if ! grep -Fx "/nocow/exim4 /var/spool/exim4 none bind 0 0" /etc
/fstab
; then
3049 echo "/nocow/exim4 /var/spool/exim4 none bind 0 0" >>/etc
/fstab
3051 i
/etc
/systemd
/system
/exim4.service.d
/override.conf
<<'EOF'
3053 # without local-fs on exim, we get these kind of errors in paniclog on shutdown:
3054 # Failed to create spool file /var/spool/exim4//input//1jCLxz-0008V4-V9-D: Permission denied
3055 After=local-fs.target
3058 ExecStartPre=/usr/local/bin/exim-nn-iptables
3060 if ! mountpoint
-q $sdir; then
3061 stopifactive exim4 exim4in
3062 if [[ -L $sdir ]]; then
3065 if [[ ! -e $dir && -d $sdir ]]; then
3068 if [[ ! -d $sdir ]]; then
3070 m
chmod 000 $sdir # only want it to be used when its mounted
3078 # ** exim/spool uid setup
3079 # i have the spool directory be common to distro multi-boot, so
3080 # we need the uid to be the same. 608 cuz it's kind of in the middle
3081 # of the free system uids.
3082 IFS
=:; read -r _ _ uid _
< <(getent passwd Debian-exim ||
:) ||
:; unset IFS
3083 IFS
=:; read -r _ _ gid _
< <(getent group Debian-exim ||
:) ||
:; unset IFS
3084 if [[ ! $uid ]]; then
3085 # from /var/lib/dpkg/info/exim4-base.postinst, plus uid and gid options
3086 m adduser
--uid 608 --system --group --quiet --home /var
/spool
/exim4 \
3087 --no-create-home --disabled-login --force-badname Debian-exim
3088 elif [[ $uid != 608 ]]; then
3089 stopifactive exim4 exim4in
3090 m usermod
-u 608 Debian-exim
3091 m groupmod
-g 608 Debian-exim
3092 m usermod
-g 608 Debian-exim
3093 m
find / /nocow
-xdev -path .
/var
/tmp
-prune -o -uid $uid -execdir chown
-h 608 {} +
3094 m
find / /nocow
-xdev -path .
/var
/tmp
-prune -o -gid $gid -execdir chgrp
-h 608 {} +
3097 # * start / stop services
3099 reifactive dnsmasq nscd
3102 m systemctl daemon-reload
3105 sysd-prom-fail-install epanicclean
3106 m systemctl
--now enable epanicclean
3110 /a
/exe
/web-conf apache2 je.b8.nz
3113 /a
/exe
/web-conf apache2 mail2.iankelling.org
3117 m
/a
/bin
/ds
/mail-cert-cron
-1
3122 m systemctl
--now enable mailnn mailnnroute
3125 # we use dns to start wg
3129 m systemctl
--now enable unbound
3133 # If these have changes, id rather manually restart it, id rather
3134 # not restart and cause temporary errors
3138 m systemctl
--now enable $vpnser
3140 if ! systemctl is-active clamav-daemon
>/dev
/null
; then
3141 m systemctl
--now enable clamav-daemon
3142 out
=$
(rsync
-aiSAX --chown=root
:root
--chmod=g-s
/a
/bin
/ds
/filesystem
/etc
/systemd
/system
/epanicclean.service
/etc
/systemd
/system
)
3147 # note, this will cause paniclog entries because it takes like 45
3148 # seconds for clamav to start, i use ./epanic-clean to remove
3153 # start spamassassin/dovecot before exim.
3154 sre dovecot spamassassin
3155 # need to wait a bit before restarting exim, else I
3156 # get a paniclog entry like: spam acl condition: all spamd servers failed
3158 m systemctl
--now enable mailclean.timer
3161 # < 2.1 (eg: in t9), uses a different data format which required manual
3162 # migration. dont start if we are running an old version.
3163 if dpkg
--compare-versions "$(dpkg -s radicale | awk '$1 == "Version
:" { print $2 }')" ge
2.1; then
3164 m systemctl
--now enable radicale
3169 # last use of $reload happens in previous block
3170 rm -f /var
/local
/mail-setup-reload
3174 $MAIL_HOST|bk|je|li
)
3175 # on li, these are never started, except $vpnser
3179 soff radicale mailclean.timer dovecot spamassassin
$vpnser mailnn clamav-daemon
3187 m systemctl
--now enable mailbindwatchdog
3190 soff mailbindwatchdog
3199 # * mail monitoring / testing
3201 # note, to test clamav, send an email with body that only contains
3202 # https://en.wikipedia.org/wiki/EICAR_test_file
3203 # which set malware_name to Eicar-Signature
3206 # note: cronjob "ian" also does some important monitoring
3207 # todo: this will sometimes cause an alert because mailtest-check will run
3208 # before we have setup network namespace and spamassassin
3209 i
/etc
/cron.d
/mailtest
<<EOF
3211 PATH=/usr/bin:/bin:/usr/local/bin
3212 MAILTO=daylert@iankelling.org
3213 */5 * * * * $u send-test-forward |& log-once send-test-forward
3214 */10 * * * * root chmod -R g+rw /m/md/bounces |& log-once -1 bounces-chmod
3215 # if a bounce happened yesterday, dont let it slip through the cracks
3216 8 1 * * * root export MAILTO=alerts@iankelling.org; [[ -s /var/log/exim4/mainlog.1 ]] && awk '\$5 == "**"' /var/log/exim4/mainlog.1
3220 m sudo rsync
-ahhi --chown=root
:root
--chmod=0755 \
3221 /b
/ds
/mailtest-check
/b
/ds
/check-remote-mailqs
/usr
/local
/bin
/
3222 i
/etc
/systemd
/system
/mailtest-check.service
<<'EOF'
3224 Description=mailtest-check
3225 After=local-fs.target
3226 StartLimitIntervalSec=0
3230 ExecStart=/usr/local/bin/mailtest-check slow
3235 WantedBy=graphical.target
3237 sysd-prom-fail-install mailtest-check
3241 test_froms
=(ian@iankelling.org z@zroe.org iank@gnu.org
)
3242 test_tos
=(testignore@expertpathologyreview.com testignore@je.b8.nz testignore@amnimal.ninja jtuttle@gnu.org
)
3244 cat >>/etc
/cron.d
/mailtest
<<EOF
3245 0 13 * * * root echo "1pm alert. You are not in the matrix."
3246 2 * * * * root check-remote-mailqs |& log-once check-remote-mailqs
3250 test_froms
=(testignore@amnimal.ninja testignore@expertpathologyreview.com
)
3251 test_tos
=(testignore@iankelling.org testignore@je.b8.nz
)
3252 # We dont need to send from different addresses to the same
3253 # address. this breaks down our nice elegant logic of building up
3254 # froms and tos , so I just handle expertpath in a special case
3255 # below and set the to: to be testignore@zroe.org. If we did sent
3256 # that way, it would also mess up our mailtest-check logic that
3257 # finds which messages to check.
3258 # for example: from testignore@amnimal.ninja to: testignore@iankelling.org testignore@zroe.org
3259 # that would become 2 messages and we'd only check 1.
3262 test_froms
=(testignore@je.b8.nz
)
3263 test_tos
=(testignore@iankelling.org testignore@zroe.org testignore@expertpathologyreview.com testignore@amnimal.ninja
)
3267 # Dont put these test messages into the sent folder or else it will
3268 # overwhelm it, plus i dont want to save a copy at all.
3269 rm -f /etc
/exim
4/ignore-sent
3270 for t
in ${test_tos[@]}; do
3271 echo $t >> /etc
/exim
4/ignore-sent
3274 cat >/usr
/local
/bin
/send-test-forward
<<'EOF'
3276 # we remove from the queue older than 4.3 minutes since we send every 5 minutes.
3278 $(/usr/sbin/exiqgrep -o 260 -i -r '^(testignore@(iankelling\.org|zroe\.org|expertpathologyreview\.com|amnimal\.ninja|je\.b8\.nz)|jtuttle@gnu\.org)$')
3280 if (( ${#olds[@]} )); then
3281 /usr/sbin/exim -Mrm "${olds[@]}" >/dev/null
3284 for test_from
in ${test_froms[@]}; do
3286 test_to
=${test_tos[0]}
3287 for t
in ${test_tos[@]:1}; do
3291 testignore@expertpathologyreview.com
)
3292 test_to
=testignore@zroe.org
3296 cat >>/usr
/local
/bin
/send-test-forward
<<EOFOUTER
3297 /usr/sbin/exim -f $test_from -t <<EOF
3300 Subject: test \$(date +%Y-%m-%dT%H:%M:%S%z) \$EPOCHSECONDS
3302 /usr/local/bin/send-test-forward
3306 m
chmod +x
/usr
/local
/bin
/send-test-forward
3309 soff mailtest-check.service
3310 rm -fv /etc
/cron.d
/mailtest \
3311 /var
/lib
/prometheus
/node-exporter
/mailtest-check.prom
* \
3312 /var
/local
/cron-errors
/check-remote-mailqs
*
3319 m sudo
-u $u mkdir
-p /home
/$u/.cache
3320 set -- /m
/mucache
/home
/$u/.cache
/mu
/m
/.mu
/home
/$u/.mu
3325 if [[ ! -L $f ]]; then
3326 if [[ -e $f ]]; then
3329 m sudo
-u $u ln -sf -T $target $f
3334 # /etc/alias setup is debian specific, and exim postinst script sets up
3335 # an /etc/alias from root to the postmaster, based on the question
3336 # exim4-config exim4/dc_postmaster, as long as there exists an entry for
3337 # root, or there was no preexisting aliases file. postfix won\'t set up
3338 # a root to $postmaster alias if it\'s already installed. Easiest to
3339 # just set it ourselves.
3341 # debconf question for postmaster:
3342 # Mail for the 'postmaster', 'root', and other system accounts needs to be redirected
3343 # to the user account of the actual system administrator.
3344 # If this value is left empty, such mail will be saved in /var/mail/mail, which is not
3346 # Note that postmaster\'s mail should be read on the system to which it is directed,
3347 # rather than being forwarded elsewhere, so (at least one of) the users listed here
3348 # should not redirect their mail off this machine. A 'real-' prefix can be used to
3349 # force local delivery.
3350 # Multiple user names need to be separated by spaces.
3351 # Root and postmaster mail recipient:
3357 # eval: (outline-minor-mode)
3358 # outline-regexp: "\\( *\\)# [*]\\{1,8\\} "
3360 # this is combined with defining outline-level in init.el