4 # Copyright (C) 2016 Ian Kelling
6 # Licensed under the Apache License, Version 2.0 (the "License");
7 # you may not use this file except in compliance with the License.
8 # You may obtain a copy of the License at
10 # http://www.apache.org/licenses/LICENSE-2.0
12 # Unless required by applicable law or agreed to in writing, software
13 # distributed under the License is distributed on an "AS IS" BASIS,
14 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
15 # See the License for the specific language governing permissions and
16 # limitations under the License.
19 trap 'echo "$0:$LINENO:error: \"$BASH_COMMAND\" returned $?" >&2' ERR
21 [[ $EUID == 0 ]] ||
exec sudo
-E "$BASH_SOURCE" "$@"
25 Usage: ${0##*/} exim4|postfix
26 Setup exim4 / postfix / dovecot
28 The minimal assumption we have is that /etc/mailpass exists
30 -h|--help Print help and exit.
36 postfix
() { [[ $type == postfix
]]; }
37 exim
() { [[ $type == exim4
]]; }
39 if ! exim
&& ! postfix
; then
43 if [[ ! $SUDO_USER ]]; then
44 echo "$0: error: requires running as nonroot or sudo"
49 ####### begin perstent password instructions ######
51 # # for hosts which have all private files I just use the same user
52 # # for other hosts, each one get\'s their own password.
53 # # for generating secure pass, and storing for server too:
54 # # user=USUALLY_SAME_AS_HOSTNAME
57 # apg -m 50 -x 70 -n 1 -a 1 -M CLN >$f
58 # s sed -i "/^$user:/d" /p/c/filesystem/etc/exim4/passwd
59 # echo "$user:$(mkpasswd -m sha-512 -s <$f)" >>/p/c/filesystem/etc/exim4/passwd
60 # echo "mail.iankelling.org $user $(<$f)" >> /p/c/machine_specific/$user/filesystem/etc/mailpass
61 # # then run this script, or part of it which uses /etc/mailpass
63 # # dovecot password, i just need 1 as I\'m the only user
64 # mkdir /p/c/filesystem/etc/dovecot
65 # echo "ian:$(doveadm pw -s ssha256)::::::" >/p/c/filesystem/etc/dovecot/users
70 # # for ad-hoc testing of some random new host sending mail:
71 # user=li # client host username & hostname
73 # apg -m 50 -x 70 -n 1 -a 1 -M CLN >$f
74 # s sed -i "/^$user:/d" /etc/exim4/passwd
75 # echo "$user:$(mkpasswd -m sha-512 -s <$f)" | s tee -a /etc/exim4/passwd
76 # echo "mail.iankelling.org:$user:$(<$f)" | ssh root@$user dd of=/etc/exim4/passwd.client
77 ####### end perstent password instructions ######
80 ####### begin persistent dkim/dns instructions #########
81 # # Remove 1 level of comments in this section, set the domain var
82 # # for the domain you are setting up, then run this and copy dns settings
84 # domain=iankelling.org
85 # c /p/c/filesystem/etc/exim4
86 # # this has several bugs addressed in comments, but it was helpful
87 # # https://debian-administration.org/article/718/DKIM-signing_outgoing_mail_with_exim4
89 # openssl genrsa -out $domain-private.pem 2048 -outform PEM
90 # openssl rsa -in $domain-private.pem -out $domain.pem -pubout -outform PEM
91 # # selector is needed for having multiple keys for one domain.
92 # # I dun do that, so just use a static one: li
93 # echo "txt record name: li._domainkey.$domain"
94 # # Debadmin page does not have v=, fastmail does, and this
95 # # says it\'s recommended in 3.6.1, default is DKIM1 anyways.
96 # # https://www.ietf.org/rfc/rfc6376.txt
97 # # Join and print all but first and last line.
98 # # last line: swap hold & pattern, remove newlines, print.
99 # # lines 2+: append to hold space
100 # echo "txt record contents:"
101 # echo "v=DKIM1; k=rsa; p=$(sed -n '${x;s/\n//gp};2,$H' $domain.pem)"
102 # chmod 644 $domain.pem
103 # chmod 640 $domain-private.pem
104 # # in conflink, we chown these to group debian
106 # # selector was also put into /etc/exim4/conf.d/main/000_localmacros,
107 # # via the mail-setup scripts
109 # # 2017-02 dmarc policies:
110 # # host -t txt _dmarc.gmail.com
111 # # yahoo: p=reject, hotmail: p=none, gmail: p=none, fastmail none for legacy reasons
112 # # there were articles claiming gmail would be changing
113 # # to p=reject, in early 2017, which didn\'t happen. I see no sources on them. It\'s
114 # # expected to cause problems
115 # # with a few old mailing lists, copying theirs for now.
117 # echo "dmarc dns, name: _dmarc value: v=DMARC1; p=none; rua=mailto:mailauth-reports@$domain"
119 # # 2017-02 spf policies:
120 # # google ~all, hotmail -all, yahoo: ?all, fastmail ?all
121 # # i include fastmail\'s settings, per their instructions,
122 # # and follow their policy. In mail in a box, or similar instructions,
123 # # I\'ve seen recommended to not use a restrictive policy.
124 # echo "spf dns: name is empty, value: v=spf1 a include:spf.messagingengine.com ?all"
126 # # to check if dns has updated, you do
127 # host -a mesmtp._domainkey.$domain
130 # # setting it to iankelling.org would work the same, but this
131 # # is more flexible, I could change where mail.iankelling.org pointed.
133 # mx records, 2 records each, for * and empty domain
134 # pri 10 mail.iankelling.org
135 # pri 20 in1-smtp.messagingengine.com
136 # pri 30 in2-smtp.messagingengine.com
138 ####### end persistent dkim instructions #########
143 # /usr/share/doc/exim4-base/README.Debian.gz
144 # /usr/share/doc/exim4-base/spec.txt.gz
146 # routers, transports, and authenticators are sections, and you define
147 # driver instances in those sections, and the manual calls them driver
148 # types but there is also a more specific "type" of driver, which is specified
149 # with the driver = some_module setting in the driver.
151 # the driver option must precede and private options (options that are
152 # specific to that driver), so follow example of putting it at beginning.
154 # The full list of option settings for any particular driver instance,
155 # including all the defaulted values, can be extracted by making use of
156 # the -bP command line option.
157 # exim -bP config_file to see what config file it used
158 # exim -bP config to see
160 # exim clear out message queue. as root:
161 # adapted from somewhere on stackoverflow.
162 # ser stop exim4; sleep 1; exim -bp | exiqgrep -i | xargs exim -Mrm; ser start exim4
164 # fastmail has changed their smtp server, but the old one still works,
165 # I see no reason to bother changing.
166 # New one is smtp.fastmail.com
168 # test delivery & rewrite settings:
169 #exim4 -bt iank@localhost
176 postconf
-ev "${MAPFILE[@]}"
178 e
() { printf "%s\n" "$*"; }
181 mxhost
=mail.iankelling.org
185 # old setup. left as comment for example
186 # mxhost=mail.messagingengine.com
188 # forward=ian@iankelling.org
190 relayhost
="[$mxhost]:$mxport" # postfix
191 smarthost
="$mxhost::$mxport" # exim
193 # trisquel 8 = openvpn, debian stretch = openvpn-client
194 vpn_ser
=openvpn-client
195 if [[ ! -e /lib
/systemd
/system
/openvpn-client@.service
]]; then
199 if [[ $HOSTNAME == $MAIL_HOST ]]; then
200 # afaik, these will get ignored because they are routing to my own
201 # machine, but rm them is safer
202 rm -f $
(eval echo ~
$postmaster)/.forward
/root
/.forward
204 # this can\'t be a symlink and has permission restrictions
205 # it might work in /etc/aliases, but this seems more proper.
206 install -m 644 {-o,-g}$postmaster <(e
$forward) $
(eval echo ~
$postmaster)/.forward
209 # offlineimap uses this too, it is much easier to use one location than to
210 # condition it\'s config and postfix\'s config
211 if [[ -f /etc
/fedora-release
]]; then
212 /a
/exe
/lnf
-T ca-certificates.crt
/etc
/ssl
/ca-bundle.trust.crt
216 # dunno why, but debian installed postfix with builddep emacs
217 # but I will just explicitly install it here since
218 # I use it for sending mail in emacs.
219 if command -v apt-get
&> /dev
/null
; then
220 debconf-set-selections
<<EOF
221 postfix postfix/main_mailer_type select Satellite system
222 postfix postfix/mailname string $HOSTNAME
223 postfix postfix/relayhost string $relayhost
224 postfix postfix/root_address string $postmaster
226 if dpkg
-s postfix
&>/dev
/null
; then
227 dpkg-reconfigure
-u -fnoninteractive postfix
229 apt-get
-y install --purge --auto-remove postfix
232 source /a
/bin
/distro-functions
/src
/package-manager-abstractions
234 # Settings from reading the output when installing on debian,
235 # then seeing which were different in a default install on arch.
236 # I assume the same works for fedora.
238 mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128
239 mailbox_size_limit = 0
240 relayhost = $relayhost
241 inet_interfaces = loopback-only
244 systemctl
enable postfix
245 systemctl start postfix
247 # i\'m assuming mail just won\'t work on systems without the sasl_passwd.
249 smtp_sasl_auth_enable = yes
250 smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd
251 smtp_sasl_security_options = noanonymous
252 smtp_tls_security_level = secure
253 message_size_limit = 20480000
254 smtp_tls_CAfile = /etc/ssl/certs/ca-certificates.crt
255 inet_protocols = ipv4
257 # msg_size_limit: I ran into a log file not sending cuz of size. double from 10 to 20 meg limit
258 # inet_protocols: without this, I\'ve had postfix try an ipv6 lookup then gives
259 # up and fail forever. snippet from syslog: type=AAAA: Host not found, try again
262 f
=/etc
/postfix
/sasl_passwd
263 install -m 600 /dev
/null
$f
264 cat /etc
/mailpass|
while read -r domain port pass
; do
265 # format: domain port user:pass
266 # mailpass is just a name i made up, since postfix and
267 # exim both use a slightly crazy format to translate to
268 # each other, it\'s easier to use my own format.
269 printf "[%s]:%s %s" "$domain" "$port" "${pass/@/#}" >>$f
271 postmap
hash:/etc
/postfix
/sasl_passwd
272 # need restart instead of reload when changing
274 service postfix restart
276 else # begin exim. has debian specific stuff for now
278 if ! dpkg
-s openvpn
&>/dev
/null
; then
279 apt-get
-y install --purge --auto-remove openvpn
282 if [[ -e /p
/c
/filesystem
]]; then
283 # to put the hostname in the known hosts
284 ssh -o StrictHostKeyChecking
=no root@li.iankelling.org
:
285 /a
/exe
/vpn-mk-client-cert
-b mail -n mail li.iankelling.org
288 cat >/etc
/systemd
/system
/mailroute.service
<<EOF
290 # this unit is configured to start and stop whenever $vpn_ser@mail.service
292 Description=Routing for email vpn
294 BindsTo=$vpn_ser@mail.service
295 After=$vpn_ser@mail.service
299 ExecStart=/a/bin/distro-setup/mail-route start
300 ExecStop=/a/bin/distro-setup/mail-route stop
304 RequiredBy=$vpn_ser@mail.service
307 cat >/etc
/systemd
/system
/offlineimapsync.timer
<<'EOF'
309 Description=Run offlineimap-sync once every 5 mins
315 WantedBy=timers.target
318 cat >/etc
/systemd
/system
/offlineimapsync.service
<<EOF
320 Description=Offlineimap sync
321 After=multi-user.target
326 ExecStart=/a/bin/log-quiet/sysd-mail-once offlineimap-sync /a/bin/distro-setup/offlineimap-sync
328 systemctl daemon-reload
329 systemctl
enable mailroute
331 # wording of question from dpkg-reconfigure exim4-config
332 # 1. internet site; mail is sent and received directly using SMTP
333 # 2. mail sent by smarthost; received via SMTP or fetchmail
334 # 3. mail sent by smarthost; no local mail
335 # 4. local delivery only; not on a network
336 # 5. no configuration at this time
338 # Note, I have used option 2 in the past for receiving mail
339 # from lan hosts, sending external mail via another smtp server.
341 # Note, other than configtype, we could set all the options in
342 # both types of configs without harm, they would either be
343 # ignored or be disabled by other settings, but the default
344 # local_interfaces definitely makes things more secure.
346 # most of these settings get translated into settings
347 # in /etc/exim4/update-exim4.conf.conf
348 # mailname setting sets /etc/mailname
350 debconf-set-selections
<<EOF
351 exim4-config exim4/use_split_config boolean true
354 source /a
/bin
/bash_unpublished
/source-semi-priv
355 exim_main_dir
=/etc
/exim
4/conf.d
/main
356 mkdir
-p $exim_main_dir
360 #### begin mail cert setup ###
361 f
=/usr
/local
/bin
/mail-cert-cron
364 trap 'echo "$0:$LINENO:error: \"$BASH_COMMAND\" returned $?" >&2' ERR
366 [[ $EUID == 0 ]] || exec sudo "$BASH_SOURCE" "$@"
368 f=/a/bin/bash_unpublished/source-semi-priv
372 if [[ $HOSTNAME == $MAIL_HOST ]]; then
373 local_mx=mail.iankelling.org
374 rsync_common="rsync -ogtL --chown=root:Debian-exim --chmod=640 root@li:/etc/letsencrypt/live/$local_mx/"
375 ${rsync_common}fullchain.pem /etc/exim4/exim.crt
376 ${rsync_common}privkey.pem /etc/exim4/exim.key
381 cat >/etc
/systemd
/system
/mailcert.service
<<'EOF'
383 Description=Mail cert rsync
384 After=multi-user.target
388 ExecStart=/a/bin/log-quiet/sysd-mail-once mailcert /usr/local/bin/mail-cert-cron
391 cat >/etc
/systemd
/system
/mailcert.timer
<<'EOF'
393 Description=Run mail-cert once a day
399 WantedBy=timers.target
401 systemctl daemon-reload
402 systemctl start mailcert
403 systemctl restart mailcert.timer
404 systemctl
enable mailcert.timer
406 ##### end mailcert setup #####
410 if [[ $HOSTNAME == $MAIL_HOST ]]; then
412 debconf-set-selections
<<EOF
413 # Mail Server configuration
414 # -------------------------
416 # Please select the mail server configuration type that best meets your needs.
418 # Systems with dynamic IP addresses, including dialup systems, should generally be
419 # configured to send outgoing mail to another machine, called a 'smarthost' for
420 # delivery because many receiving systems on the Internet block incoming mail from
421 # dynamic IP addresses as spam protection.
423 # A system with a dynamic IP address can receive its own mail, or local delivery can be
424 # disabled entirely (except mail for root and postmaster).
426 # 1. internet site; mail is sent and received directly using SMTP
427 # 2. mail sent by smarthost; received via SMTP or fetchmail
428 # 3. mail sent by smarthost; no local mail
429 # 4. local delivery only; not on a network
430 # 5. no configuration at this time
432 # General type of mail configuration: 1
433 exim4-config exim4/dc_eximconfig_configtype select internet site; mail is sent and received directly using SMTP
437 # The 'mail name' is the domain name used to 'qualify' mail addresses without a domain
440 # This name will also be used by other programs. It should be the single, fully
441 # qualified domain name (FQDN).
443 # Thus, if a mail address on the local host is foo@example.org, the correct value for
444 # this option would be example.org.
446 # This name won\'t appear on From: lines of outgoing messages if rewriting is enabled.
449 exim4-config exim4/mailname string mail.iankelling.org
454 # Please enter a semicolon-separated list of recipient domains for which this machine
455 # should consider itself the final destination. These domains are commonly called
456 # 'local domains'. The local hostname (treetowl.lan) and 'localhost' are always added
457 # to the list given here.
459 # By default all local domains will be treated identically. If both a.example and
460 # b.example are local domains, acc@a.example and acc@b.example will be delivered to the
461 # same final destination. If different domain names should be treated differently, it
462 # is necessary to edit the config files afterwards.
464 # Other destinations for which mail is accepted:
465 # iank.bid is for testing
466 # mail.iankelling.org is for machines i own
467 exim4-config exim4/dc_other_hostnames string *.iankelling.org;iankelling.org;*iank.bid;iank.bid;*zroe.org;zroe.org;*.b8.nz;b8.nz
472 # Please enter a semicolon-separated list of IP addresses. The Exim SMTP listener
473 # daemon will listen on all IP addresses listed here.
475 # An empty value will cause Exim to listen for connections on all available network
478 # If this system only receives mail directly from local services (and not from other
479 # hosts), it is suggested to prohibit external connections to the local Exim daemon.
480 # Such services include e-mail programs (MUAs) which talk to localhost only as well as
481 # fetchmail. External connections are impossible when 127.0.0.1 is entered here, as
482 # this will disable listening on public network interfaces.
484 # IP-addresses to listen on for incoming SMTP connections:
485 exim4-config exim4/dc_local_interfaces string
490 # Mail for the 'postmaster', 'root', and other system accounts needs to be redirected
491 # to the user account of the actual system administrator.
493 # If this value is left empty, such mail will be saved in /var/mail/mail, which is not
496 # Note that postmaster\'s mail should be read on the system to which it is directed,
497 # rather than being forwarded elsewhere, so (at least one of) the users listed here
498 # should not redirect their mail off this machine. A 'real-' prefix can be used to
499 # force local delivery.
501 # Multiple user names need to be separated by spaces.
503 # Root and postmaster mail recipient:
504 exim4-config exim4/dc_postmaster string $postmaster
508 # Exim is able to store locally delivered email in different formats. The most commonly
509 # used ones are mbox and Maildir. mbox uses a single file for the complete mail folder
510 # stored in /var/mail/. With Maildir format every single message is stored in a
511 # separate file in ~/Maildir/.
513 # Please note that most mail tools in Debian expect the local delivery method to be
514 # mbox in their default.
516 # 1. mbox format in /var/mail/ 2. Maildir format in home directory
518 # Delivery method for local mail: 2
519 exim4-config exim4/dc_localdelivery select Maildir format in home directory
521 # MAIN_HARDCODE_PRIMARY_HOSTNAME might mess up the
522 # smarthost config type, not sure. all other settings
523 # would be unused in that config type.
524 cat >$exim_main_dir/000_localmacros
<<EOF
525 # i don't have ipv6 setup for my tunnel yet.
528 MAIN_TLS_ENABLE = true
534 # https://debian-administration.org/article/718/DKIM-signing_outgoing_mail_with_exim4
536 # The file is based on the outgoing domain-name in the from-header.
537 DKIM_DOMAIN = \${lc:\${domain:\$h_from:}}
539 DKIM_PRIVATE_KEY= \${if exists{/etc/exim4/\${dkim_domain}-private.pem} {/etc/exim4/\${dkim_domain}-private.pem}}
542 # failing message on mail-tester.com:
543 # We check if there is a server (A Record) behind your hostname treetowl.
544 # You may want to publish a DNS record (A type) for the hostname treetowl or use a different hostname in your mail software
545 # https://serverfault.com/questions/46545/how-do-i-change-exim4s-primary-hostname-on-a-debian-box
546 # and this one seemed appropriate from grepping config.
547 # I originally set this to li.iankelling.org, but then ended up with errors when li tried to send
548 # mail to treetowl, so this should basically be a name that no host has as their
549 # canonical hostname since the actual host sits behind a nat and changes.
550 # Seems logical for this to be the same as mailname.
551 MAIN_HARDCODE_PRIMARY_HOSTNAME = mail.iankelling.org
553 # normally empty, I set this so I can set the envelope address
554 # when doing mail redelivery to invoke filters
555 MAIN_TRUSTED_GROUPS = $u
557 LOCAL_DELIVERY = dovecot_lmtp
559 # options exim has to avoid having to alter the default config files
560 CHECK_RCPT_LOCAL_ACL_FILE = /etc/exim4/rcpt_local_acl
561 CHECK_DATA_LOCAL_ACL_FILE = /etc/exim4/data_local_acl
563 # debian exim config added this in 2016 or so?
564 # it's part of the smtp spec, to limit lines to 998 chars
565 # but a fair amount of legit mail does not adhere to it. I don't think
566 # this should be default, like it says in
567 # https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=828801
568 # todo: the bug for introducing this was about headers, but
569 # the fix maybe is for all lines? one says gmail rejects, the
570 # other says gmail does not reject. figure out and open a new bug.
571 IGNORE_SMTP_LINE_LENGTH_LIMIT = true
573 # most of the ones that gmail seems to use.
574 # Exim has horrible default of signing unincluded
575 # list- headers since they got mentioned in an
576 # rfc, but this messes up mailing lists, like gnu/debian which want to
577 # keep your dkim signature intact but add list- headers.
578 DKIM_SIGN_HEADERS = mime-version:in-reply-to:references:from:date:subject:to
583 ####### begin dovecot setup ########
584 # based on a little google and package search, just the dovecot
585 # packages we need instead of dovecot-common.
587 # dovecot-lmtpd is for exim to deliver to dovecot instead of maildir
588 # directly. The reason to do this is to use dovecot\'s sieve, which
589 # has extensions that allow it to be almost equivalent to exim\'s
590 # filter capabilities, some ways probably better, some worse, and
591 # sieve has the benefit of being supported in postfix and
592 # proprietary/weird environments, so there is more examples on the
593 # internet. I was torn about whether to do this or not, meh.
594 apt-get
-y install --purge --auto-remove \
595 dovecot-core dovecot-imapd dovecot-sieve dovecot-lmtpd
597 # if we changed 90-sieve.conf and removed the active part of the
598 # sieve option, we wouldn\'t need this, but I\'d rather not modify a
599 # default config if not needed. This won\'t work as a symlink in /a/c
601 sudo
-u $postmaster /a
/exe
/lnf
-T sieve
/main.sieve $
(eval echo ~
$postmaster)/.dovecot.sieve
603 sed -ri -f - /etc
/dovecot
/conf.d
/10-mail.conf
<<'EOF'
604 1i mail_location = maildir:/m/md:LAYOUT=fs:INBOX=/m/md/INBOX
605 /^\s*mail_location\s*=/d
608 cat >/etc
/dovecot
/conf.d
/20-lmtp.conf
<<EOF
610 #per https://wiki2.dovecot.org/Pigeonhole/Sieve/Configuration
611 mail_plugins = \$mail_plugins sieve
613 #mail_plugins = \$mail_plugins
615 # For a normal setup with exim, we need something like this, which
616 # removes the domain part
617 # auth_username_format = %Ln
619 # or else # Exim says something like
620 # "LMTP error after RCPT ... 550 ... User doesn't exist someuser@somedomain"
621 # Dovecot verbose log says something like
622 # "auth-worker(9048): passwd(someuser@somedomain): unknown user"
623 # reference: http://wiki.dovecot.org/LMTP/Exim
625 # However, I use this to direct all mail to the same inbox.
626 # A normal way to do this, which I did at first is to have
627 # a router in exim almost at the end, eg 950,
629 # debug_print = "R: catchall for \$local_part@\$domain"
631 # domains = +local_domains
634 # http://blog.alteholz.eu/2015/04/exim4-and-catchall-email-address/
635 # with superflous options removed.
636 # However, this causes the envelope to be rewritten,
637 # which makes filtering into mailboxes a little less robust or more complicated,
638 # so I've done it this way instead. it also requires
639 # modifying the local router in exim.
640 auth_username_format = $u
646 cat >/etc
/dovecot
/local.conf
<<'EOF'
647 # so I can use a different login that my shell login for mail. this is
648 # worth doing solely for the reason that if this login is compromised,
649 # it won't also compromise my shell password.
650 !include conf.d/auth-passwdfile.conf.ext
652 # settings derived from wiki and 10-ssl.conf
654 ssl_cert = </etc/exim4/exim.crt
655 ssl_key = </etc/exim4/exim.key
656 # https://github.com/certbot/certbot/raw/master/certbot-apache/certbot_apache/options-ssl-apache.conf
657 # in my cert cronjob, I check if that has changed upstream.
658 ssl_cipher_list = ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:AES:CAMELLIA:DES-CBC3-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!PSK:!aECDH:!EDH-DSS-DES-CBC3-SHA:!EDH-RSA-DES-CBC3-SHA:!KRB5-DES-CBC3-SHA
660 # ian: added this, more secure, per google etc
661 ssl_prefer_server_ciphers = yes
663 # for debugging info, uncomment these.
664 # logs go to syslog and to /var/log/mail.log
668 ####### end dovecot setup ########
671 systemctl
enable offlineimapsync.timer
672 systemctl start offlineimapsync.timer
673 systemctl restart
$vpn_ser@
mail
674 systemctl
enable $vpn_ser@
mail
675 systemctl
enable dovecot
676 systemctl restart dovecot
678 else # $HOSTNAME != $MAIL_HOST
679 systemctl disable offlineimapsync.timer
&>/dev
/null ||
:
680 systemctl stop offlineimapsync.timer
&>/dev
/null ||
:
681 systemctl disable
$vpn_ser@
mail
682 systemctl stop
$vpn_ser@
mail
683 systemctl disable dovecot ||
:
684 systemctl stop dovecot ||
:
687 # would only exist because I wrote it i the previous condition,
688 # it\'s not part of exim
689 rm -f $exim_main_dir/000_localmacros
690 debconf-set-selections
<<EOF
691 exim4-config exim4/dc_eximconfig_configtype select mail sent by smarthost; no local mail
692 exim4-config exim4/dc_smarthost string $smarthost
693 # the default, i think is from /etc/mailname. better to set it to
694 # whatever the current fqdn is.
695 exim4-config exim4/mailname string $(hostname -f)
698 fi # end $HOSTNAME != $MAIL_HOST
700 # if we already have it installed, need to reconfigure, without being prompted
701 if dpkg
-s exim4-config
&>/dev
/null
; then
702 # gotta remove this, otherwise the set-selections are completely
703 # ignored. It woulda been nice if this was documented somewhere!
704 rm -f /etc
/exim
4/update-exim4.conf.conf
705 dpkg-reconfigure
-u -fnoninteractive exim4-config
708 # i have the spool directory be common to distro multi-boot, so
709 # we need the uid to be the same. 608 cuz it's kind of in the middle
710 # of the free system uids.
711 IFS
=:; read _ _ uid _
< <(getent passwd Debian-exim
); unset IFS
712 IFS
=:; read _ _ gid _
< <(getent group Debian-exim
); unset IFS
713 if [[ ! $uid ]]; then
714 # from /var/lib/dpkg/info/exim4-base.postinst, plus uid and gid options
715 adduser
--uid 608 --gid 608 --system --group --quiet --home /var
/spool
/exim4 \
716 --no-create-home --disabled-login --force-badname Debian-exim
717 elif [[ $uid != 608 ]]; then
718 systemctl stop exim4 ||
:
719 usermod
-u 608 Debian-exim
720 groupmod
-g 608 Debian-exim
721 usermod
-g 608 Debian-exim
722 find / /nocow
-xdev -uid $uid -exec chown
-h 608 {} +
723 find / /nocow
-xdev -gid $gid -exec chgrp
-h 608 {} +
726 # light version of exim does not have sasl auth support.
727 apt-get
-y install --purge --auto-remove exim4-daemon-heavy spamassassin
732 ##### begin spamassassin config
733 systemctl
enable spamassassin
735 sed -i '/^\s*CRON\s*=/d' /etc
/default
/spamassassin
736 e CRON
=1 >>/etc
/default
/spamassassin
737 # just noticed this in the config file, seems like a good idea.
738 sed -i '/^\s*NICE\s*=/d' /etc
/default
/spamassassin
739 e
'NICE="--nicelevel 15"' >>/etc
/default
/spamassassin
740 systemctl start spamassassin
741 systemctl reload spamassassin
743 cat >/etc
/systemd
/system
/spamddnsfix.service
<<'EOF'
745 Description=spamd dns bug fix cronjob
749 ExecStart=/a/bin/distro-setup/spamd-dns-fix
751 # 2017-09, debian closed the bug on this saying upstream had fixed it.
752 # remove this when i\'m using the newer package, ie, debian 10, or maybe
754 cat >/etc
/systemd
/system
/spamddnsfix.timer
<<'EOF'
756 Description=run spamd bug fix script every 10 minutes
760 # the script looks back 9 minutes into the journal,
761 # it takes a second to run,
762 # so lets run every 9 minutes and 10 seconds.
766 WantedBy=timers.target
768 systemctl daemon-reload
769 systemctl restart spamddnsfix.timer
770 systemctl
enable spamddnsfix.timer
772 ##### end spamassassin config
778 cat >/etc
/exim
4/rcpt_local_acl
<<'EOF'
779 # Only hosts we control send to mail.iankelling.org, so make sure
780 # they are all authed.
781 # Note, if we wanted authed senders for all domains,
782 # we could make this condition in acl_check_mail
784 message = ian trusted domain recepient but no auth
786 domains = mail.iankelling.org
788 cat >/etc
/exim
4/data_local_acl
<<'EOF'
789 # Except for the "condition =", this was
790 # a comment in the check_data acl. The comment about this not
791 # being suitable is mostly bs. The only thing related I found was to
792 # add the condition =, cuz spamassassin has problems with big
793 # messages and spammers don't bother with big messages,
794 # but I've increased the size from 10k
795 # suggested in official docs, and 100k in the wiki example because
796 # those docs are rather old and I see a 110k spam message
797 # pretty quickly looking through my spam folder.
799 condition = ${if < {$message_size}{2000K}}
800 spam = Debian-exim:true
801 add_header = X-Spam_score: $spam_score\n\
802 X-Spam_score_int: $spam_score_int\n\
803 X-Spam_bar: $spam_bar\n\
804 X-Spam_report: $spam_report
807 cat >/etc
/exim
4/conf.d
/auth
/29_exim4-config_auth
<<'EOF'
808 # from 30_exim4-config_examples
813 server_condition = "${if crypteq{$auth3}{${extract{1}{:}{${lookup{$auth2}lsearch{CONFDIR/passwd}{$value}{*:*}}}}}{1}{0}}"
814 server_set_id = $auth2
816 .ifndef AUTH_SERVER_ALLOW_NOTLS_PASSWORDS
817 server_advertise_condition = ${if eq{$tls_in_cipher}{}{}{*}}
821 cat >/etc
/exim
4/conf.d
/router
/900_exim4-config_local_user
<<'EOF'
822 ### router/900_exim4-config_local_user
823 #################################
825 # This router matches local user mailboxes. If the router fails, the error
826 # message is "Unknown user".
829 debug_print = "R: local_user for $local_part@$domain"
831 domains = +local_domains
832 # ian: commented this, in conjunction with a dovecot lmtp
833 # change so I get mail for all users.
836 transport = LOCAL_DELIVERY
837 cannot_route_message = Unknown user
839 cat >/etc
/exim
4/conf.d
/transport
/30_exim4-config_dovecot_lmtp
<<'EOF'
842 socket = /var/run/dovecot/lmtp
843 #maximum number of deliveries per batch, default 1
848 # begin setup passwd.client
849 f
=/etc
/exim
4/passwd.client
850 rm -f /etc
/exim
4/passwd.client
851 install -m 640 -g Debian-exim
/dev
/null
$f
852 cat /etc
/mailpass|
while read -r domain port pass
; do
853 # reference: exim4_passwd_client(5)
854 printf "%s:%s\n" "$domain" "$pass" >>$f
856 # end setup passwd.client
858 # https://blog.dhampir.no/content/make-exim4-on-debian-respect-forward-and-etcaliases-when-using-a-smarthost
859 # i only need .forwards, so just doing that one.
860 cd /etc
/exim
4/conf.d
/router
861 b
=userforward_higher_priority
862 # replace the router name so it is unique
863 sed -r s
/^
\\S
+:/$b:/ 600_exim4-config_userforward
>175_
$b
864 systemctl restart exim4
868 # /etc/alias setup is debian specific, and
869 # exim config sets up an /etc/alias from root to the postmaster, which i
870 # config to ian, as long as there exists an entry for root, or there was
871 # no preexisting aliases file. based on the postinst file. postfix
872 # won\'t set up a root to $postmaster alias if it\'s already installed.
873 # Since postfix is not the greatest, just set it ourselves.
874 if [[ $postmaster != root
]]; then
875 sed -i --follow-symlinks -f - /etc
/aliases
<<EOF
876 \$a root: $postmaster
882 # put spool dir in directory that spans multiple distros.
883 # based on http://www.postfix.org/qmgr.8.html and my notes in gnus
885 # todo: I\'m suspicious of uids for Debian-exim being the same across
886 # distros. It would be good to test this.
888 sdir
=/var
/spool
/$type
889 # we only do this if our system has $dir
890 if [[ -e /nocow
&& $
(readlink
-f $sdir) != $dir ]]; then
892 if [[ ! -e $dir && -d $sdir ]]; then
895 /a
/exe
/lnf
-T $dir $sdir
898 systemctl restart
$type
899 systemctl
enable $type
901 # MAIL_HOST also does radicale, and easier to start and stop it here
902 # for when MAIL_HOST changes, so radicale gets the synced files and
903 # does not stop us from remounting /o.
904 if dpkg
-s radicale
&>/dev
/null
; then
905 if [[ $HOSTNAME == $MAIL_HOST ]]; then
906 systemctl restart radicale
907 systemctl
enable radicale
908 if [[ -e /etc
/logrotate.d
/radicale.disabled
]]; then
909 mv /etc
/logrotate.d
/radicale
{.disabled
,}
912 systemctl stop radicale
913 systemctl disable radicale
914 # weekly logrotate tries to restart radicale even if it's a disabled service in flidas.
915 if [[ -e /etc
/logrotate.d
/radicale
]]; then
916 mv /etc
/logrotate.d
/radicale
{,.disabled
}
922 # if I wanted the from address to be renamed and sent to a different address,
923 # echo "sdx@localhost development@localhost" | sudo dd of=/etc/postfix/recipient_canonical
924 # sudo postmap hash:/etc/postfix/recipient_canonical
925 # sudo service postfix reload