2 # Copyright (C) 2016 Ian Kelling
4 # Licensed under the Apache License, Version 2.0 (the "License");
5 # you may not use this file except in compliance with the License.
6 # You may obtain a copy of the License at
8 # http://www.apache.org/licenses/LICENSE-2.0
10 # Unless required by applicable law or agreed to in writing, software
11 # distributed under the License is distributed on an "AS IS" BASIS,
12 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 # See the License for the specific language governing permissions and
14 # limitations under the License.
18 src
="${BASH_SOURCE%/*}"
22 exec &> >(sudo
tee -a /var
/log
/distro-end
)
23 echo "$0: $(date): starting now)"
24 # see example of usage to understand.
27 IFS
= read -r -d '' y ||
:
30 spa
() { # simple package add
35 sed="sed --follow-symlinks"
46 ########### begin section including li ################
47 pi
${p3[@]} $
($src/distro-pkgs
)
65 # no equivalent in other distros:
67 debian|trisquel|ubuntu
)
68 if ! dpkg
-s apt-file
&>/dev
/null
; then
69 # this condition is just a speed optimization
80 # allows me to pipe with ssh -t, and gets rid of spam
81 # http://forums.debian.net/viewtopic.php?f=5&t=85822
82 # i'd rather disable the service than comment the init file
83 # this says disabling the service, it will still get restarted
84 # but this script doesn't do anything on restart, so it should be fine
85 s
dd of
=/var
/run
/motd.dynamic
if=/dev
/null
86 # stretch doesn't have initscripts pkg installed by default
87 if [[ $
(debian-codename
) == jessie
]]; then
88 s update-rc.d motd disable
92 # this isn't a complete solution. It still shows me when updates are available,
93 # but it's no big deal.
94 s t
/etc
/update-motd.d
/10-help-text /etc
/update-motd.d
/00-header
100 # https://debian-handbook.info/browse/stable/sect.regular-upgrades.html
101 # /etc/cron.daily/apt calls unattended-upgrades
102 # /usr/share/doc/unattended-upgrades# cat README.md
103 # /etc/apt/apt.conf.d/50unattended-upgrades
105 setup-debian-auto-update
109 ### begin docker install ####
111 # https://store.docker.com/editions/community/docker-ce-server-debian?tab=description
112 pi software-properties-common apt-transport-https
113 curl
-fsSL https
://download.docker.com
/linux
/$
(distro-name-compat
)/gpg | sudo apt-key add
-
114 sudo add-apt-repository \
115 "deb [arch=amd64] https://download.docker.com/linux/$(distro-name-compat) \
116 $(debian-codename-compat) \
119 # docker eats up a fair amount of cpu when doing nothing, so don't enable it unless
125 # other distros unknown
127 ### end docker install ####
130 ### begin certbot install ###
133 # note, need python-certbot-nginx for nginx, but it depends on nginx,
134 # and I'm not installing nginx by default right now.
135 # note python-certbot-apache is in suggests, but so is a doc package that brought in xorg
136 if [[ $
(debian-codename
) == jessie
]]; then
137 pi
-t jessie-backports certbot python-certbot-apache
139 pi certbot python-certbot-apache
143 # not packaged in xenial or flidas
144 pi software-properties-common
145 s add-apt-repository
-y ppa
:certbot
/certbot ||
:
147 pi python-certbot-apache
149 # todo: other distros unknown
151 # make a version of the certbot timer that emails me.
152 x
=/systemd
/system
/certbot
153 $sed -r -f - /lib
$x.timer
<<'EOF' |s dd of=/etc${x}mail.timer
154 s,^Description.*,\0 mail version,
156 $sed -r -f - /lib
$x.service
<<'EOF' |s dd of=/etc${x}mail.service
157 s,(ExecStart=)(/usr/bin/certbot),\1/a/bin/log-quiet/sysd-mail-once certbotmail \2 --renew-hook /a/bin/distro-setup/certbot-renew-hook,
160 sgo certbotmail.timer
161 ### end certbot install ###
167 /a
/bin
/webcam
/install-server
170 /a
/bin
/webcam
/install-client
178 lj
) domain
=iank.bid
; exit 0 ;;
179 li
) domain
=iankelling.org
;;
181 /a
/h
/setup.sh
$domain
184 sudo
-E /a
/bin
/mediawiki-setup
/mw-setup-script
186 pi-nostart mumble-server
187 s
$sed -ri "s/^ *(serverpassword=).*/\1$(< /a/bin/bash_unpublished/mumble_pass)/" /etc
/mumble-server.ini
189 # do certificate to avoid warning about unsigned cert,
190 # which is overkill for my use, but hey, I'm cool, I know
192 web-conf apache2 mumble.iankelling.org
193 s
rm -f /etc
/apache
2/sites-enabled
/mumble.iankelling.org
195 export RENEWED_LINEAGE=/etc/letsencrypt/live/mumble.iankelling.org
196 /a/bin/distro-setup/certbot-renew-hook
202 s
tee /etc
/openvpn
/client-config
/mail <<'EOF'
203 ifconfig-push 10.8.0.4 255.255.255.0
206 # it\'s strange. docker seems to make the default for forward
207 # be drop, but then I set it to accept and it\'s stuck that way,
208 # I dun know why. But, let\'s make sure we can forward anyways.
209 s DEBIAN_FRONTEND
=noninteractive pi iptables-persistent
210 rm /etc
/iptables
/rules.v6
211 s
tee /etc
/iptables
/rules.v4
<<'EOF'
213 -A FORWARD -i tun+ -o eth0 -j ACCEPT
214 -A FORWARD -i eth0 -o tun+ -j ACCEPT
219 sudo
dd of
=/etc
/systemd
/system
/vpnmail.service
<<EOF
221 Description=Turns on iptables mail nat
226 ExecStart=/a/bin/distro-setup/vpn-mail-forward start
227 ExecStop=/a/bin/distro-setup/vpn-mail-forward stop
230 WantedBy=openvpn.service
233 ser
enable vpnmail.service
234 # needed for li's local mail delivery.
235 tu
/etc
/hosts
<<<"10.8.0.4 mail.iankelling.org"
236 if [[ -e /lib/systemd/system/openvpn-server@.service ]]; then
237 vpn_service=openvpn-server@server
239 vpn_service=openvpn@server
242 # setup let's encrypt cert
243 web-conf apache2 mail.iankelling.org
244 s rm /etc/apache2/sites-enabled/mail.iankelling.org{,-redir}.conf
247 domain=cal.iankelling.org
248 web-conf -f 10.8.0.4:5232 - apache2 $domain <<'EOF'
249 #https://httpd.apache.org/docs/2.4/mod/mod_authn_core.html#authtype
250 # https://stackoverflow.com/questions/5011102/apache-reverse-proxy-with-basic-authentication
252 Options +FollowSymLinks +Multiviews +Indexes
255 AuthName "Authentication Required"
256 # setup one time, with root:www-data, 640
257 AuthUserFile "/etc/caldav-htpasswd"
261 # nginx version of above would be:
262 # auth_basic "Not currently available";
263 # auth_basic_user_file /etc/nginx/caldav/htpasswd;
266 ########## begin pump.io setup ##########
268 # once pump adds a logrotation script, turn off nologger,
270 # "logfile": "/var/log/pumpio/pumpio.log",
272 s dd of=/etc/pump.io.json <<'EOF'
274 "secret": "SECRET_REPLACE_ME",
276 "params": { "dbname": "pumpio" },
278 "site": "pump.iankelling.org",
279 "owner": "Ian Kelling",
280 "ownerURL": "https://iankelling.org/",
283 "hostname": "pump.iankelling.org",
285 "datadir": "/home/pumpio/pumpdata",
286 "enableUploads": true,
287 "debugClient": false,
288 "disableRegistration": true,
290 "key": "/home/pumpio/privkey.pem",
291 "cert": "/home/pumpio/fullchain.pem",
292 "address": "localhost",
296 s sed -i "s#SECRET_REPLACE_ME#$(cat /p/c/machine_specific/li/pump-secret)#" /etc/pump.io.json
298 # stretch node is too old
299 # https://nodejs.org/en/download/package-manager/
300 curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash -
301 pi nodejs graphicsmagick mongodb
303 if [[ -e pump.io ]]; then
307 git clone https://github.com/pump-io/pump.io.git
310 # note: these 2 commands seem
311 # note: doing this or the npm install pump.io as root had problems.
314 # normally, next command would be
315 # s npm install -g odb
316 # but it\'s this until a bug in pump gets fixed
317 # https://github.com/pump-io/pump.io/issues/1287
318 s npm install -g databank-mongodb@0.19.2
319 if ! getent passwd pumpio &>/dev/null; then
320 s useradd -Um -s /bin/false pumpio
322 sudo -u pumpio mkdir -p /home/pumpio/pumpdata
323 # for testing browser when only listening to localhost,
324 # in the pump.io.json, set hostname localhost, urlPort 5233
325 #ssh -L 5233:localhost:5233 li
327 s mkdir -p /var/log/pumpio/
328 s chown pumpio:pumpio /var/log/pumpio/
330 web-conf - apache2 pump.iankelling.org <<'EOF'
331 # currently a bug in pump that we cant terminate ssl
334 ProxyPass / https://127.0.0.1:8001/
335 ProxyPassReverse / https://127.0.0.1:8001/
336 # i have sockjs disabled per people suggesting that
337 # it won\'t work with apache right now.
338 # not sure if it would work with this,
339 # but afaik, this is pointless atm.
340 <Location /main/realtime/sockjs/>
341 ProxyPass wss://127.0.0.1:8001/main/realtime/sockjs/
342 ProxyPassReverse wss://127.0.0.1:8001/main/realtime/sockjs/
347 export RENEWED_LINEAGE=/etc/letsencrypt/live/pump.iankelling.org
348 /a/bin/distro-setup/certbot-renew-hook
351 s dd of=/etc/systemd/system/pump.service <<'EOF'
354 After=syslog.target network.target mongodb.service
355 Requires=mongodb.service
361 ExecStart=/home/iank/pump.io/bin/pump
362 Environment=NODE_ENV=production
363 # failed to find databank-mongodb without this.
364 # I just looked at my environment variables took a guess.
365 Environment=NODE_PATH=/usr/lib/nodejs:/usr/lib/node_modules:/usr/share/javascript
368 WantedBy=multi-user.target
372 ########## end pump.io setup ############
375 ############# begin setup mastodon ##############
377 # main doc is Docker-Guide.md in docs repo
379 # I'd like to try gnu social just cuz of gnu, but it's not being
380 # well maintained, for example, simple pull requests
382 # https://git.gnu.io/gnu/gnu-social/merge_requests/143
383 # and I submitted my own bugs, basic docs are broken
384 # https://git.gnu.io/gnu/gnu-social/issues/269
386 # note, docker required, but we installed it earlier
388 # i subscrubed to https://github.com/docker/compose/releases.atom
389 # to see release notes.
390 # i had some problems upgrading. blew things away with
391 # docker-compose down
392 # docker rmi $(docker images -q)
394 # when running docker-compose run, kernel stack traces are printed to the journal.
395 # things seem to succeed, google says nothing, so ignoring them.
396 curl -L https://github.com/docker/compose/releases/download/1.18.0/docker-compose-`uname -s`-`uname -m` | s dd of=/usr/local/bin/docker-compose
397 s chmod +x /usr/local/bin/docker-compose
402 i clone https://github.com/tootsuite/mastodon
404 # subbed to atom feed to deal with updates
405 git checkout $(git tag | grep -v rc | tail -n1)
407 # per instructions, uncomment redis/postgres persistence in docker-compose.yml
408 sed -i 's/^#//' docker-compose.yml
410 cat >.env.production <<'EOF'
419 LOCAL_DOMAIN=mast.iankelling.org
422 SINGLE_USER_MODE=true
424 SMTP_SERVER=mail.iankelling.org
427 SMTP_FROM_ADDRESS=notifications@mast.iankelling.org
428 SMTP_DOMAIN=mast.iankelling.org
429 SMTP_DELIVERY_METHOD=smtp
432 for key in PAPERCLIP_SECRET SECRET_KEY_BASE OTP_SECRET; do
433 # 1 minute 7 seconds to run this docker command
434 # to generate a secret, and it has ^M chars at the end. wtf. really dumb
435 printf "%s=%s\n" $key "$(docker-compose run --rm web rake secret|dos2unix|tail -n1)" >>.env.production
438 while read -r domain port pass; do
439 if [[ $domain == mail.iankelling.org ]]; then
441 # remove the username part
443 printf "SMTP_PASSWORD=%s\n" "$pass" >>.env.production
446 done < <(s cat /etc/mailpass)
448 echo "$0: error, failed to find mailpass domain for mastadon"
452 # docker compose makes an interface named like br-8f3e208558f2. we need mail to
454 if ! s /sbin/iptables -t nat -C PREROUTING -i br-+ -p tcp -m tcp --dport 25 -j DNAT --to-destination 10.8.0.4:25; then
455 s /sbin/iptables -t nat -A PREROUTING -i br-+ -p tcp -m tcp --dport 25 -j DNAT --to-destination 10.8.0.4:25
458 docker-compose run --rm web rake mastodon:webpush:generate_vapid_key | grep -E '^VAPID_PUBLIC_KEY=|^VAPID_PRIVATE_KEY=' >> .env.production
459 logq docker-compose run --rm web rake db:migrate
460 docker-compose run --rm web rails assets:precompile
462 # avatar failed to upload, did
463 # docker logs mastodon_web_1
464 # google lead me to this
465 s chown -R 991:991 public/system
467 # docker daemon takes care of starting on boot.
470 s a2enmod proxy_wstunnel headers
471 web-conf -f 3000 - apache2 mast.iankelling.org <<'EOF'
473 RequestHeader set X-Forwarded-Proto "https"
474 ProxyPass /500.html !
475 ProxyPass /oops.png !
476 ProxyPass /api/v1/streaming/ ws://localhost:4000/
477 ProxyPassReverse /api/v1/streaming/ ws://localhost:4000/
478 ErrorDocument 500 /500.html
479 ErrorDocument 501 /500.html
480 ErrorDocument 502 /500.html
481 ErrorDocument 503 /500.html
482 ErrorDocument 504 /500.html
486 ############### !!!!!!!!!!!!!!!!!
487 ############### manual steps:
489 # only following a few people atm, so not bothering to figure out backups
490 # when mastodon has not documented it at all.
495 # johns@status.fsf.org
497 # sign in page is at https://mast.iankelling.org/auth/sign_in
498 # register as iank, then
499 # https://github.com/tootsuite/documentation/blob/master/Running-Mastodon/Administration-guide.md
500 # docker-compose run --rm web bundle exec rails mastodon:make_admin USERNAME=iank
502 ############# end setup mastodon ##############
504 # we use nsupdate to update the ip of home
508 # znc config generated by doing
510 # selected port is also used in erc config
511 # comma separated channel list worked.
512 # while figuring things out, running znc -D for debug in foreground.
513 # to exit and save config:
514 # /msg *status shutdown
515 # configed auth on freenode by following
516 # https://wiki.znc.in/Sasl:
517 # /msg *sasl RequireAuth yes
518 # /msg *sasl Mechanism PLAIN
519 # /msg *sasl Set ident_name password
520 # created the system service after, and had to do
521 # mv /home/iank/.znc/* /var/lib/znc
522 # sed -i 's,/home/iank/.znc/,/var/lib/znc,' /var/lib/znc/config/znc.conf
523 # and made a copy of the config files into /p/c
524 # /msg *status LoadMod --type=global log -sanitize
525 # to get into the web interface,
526 # cat /etc/letsencrypt/live/iankelling.org/{privkey,cert,chain}.pem > /var/lib/znc/znc.pem
527 # then use non-main browser or else it doesn't allow it based on ocsp stapling from my main site.
528 # https://iankelling.org:12533/
529 # i'm going to figure out how to automate this when it expires. i know i can hook a script into the renewal. https://wiki.znc.in/FAQ seems to imply that znc doesn\'t need restart.
530 # todo: in config file AllowWeb = true should be false. better security if that is off unless we need it.
531 # /msg *status LoadMod --type=network perform
532 # /msg *perform add PRIVMSG ChanServ :invite #fsf-office
533 # /msg *perform add JOIN #fsf-office
536 # also ran /znc LoadMod clearbufferonmsg
537 # it would be nice if erc supported erc query buffers by doing
538 # /msg *status clearbuffer <name of the query/receiver
540 # an example seems to be here: https://github.com/zenspider/elisp/blob/master/rwd-irc.el
541 # if that was the case i could remove the module clearbufferonmsg
542 # alo would be nice if erc supported
543 # https://wiki.znc.in/self-message
544 # https://wiki.znc.in/Query_buffers \
546 s useradd --create-home -d /var/lib/znc --system --shell /sbin/nologin --comment "Account to run ZNC daemon" --user-group znc || [[ $? == 9 ]] # 9 if it exists already
547 chmod 700 /var/lib/znc
548 s chown -R znc:znc /var/lib/znc
549 s dd of=/etc/systemd/system/znc.service 2>/dev/null <<'EOF'
551 Description=ZNC, an advanced IRC bouncer
552 After=network-online.target
555 ExecStart=/usr/bin/znc -f --datadir=/var/lib/znc
559 WantedBy=multi-user.target
564 echo "$0: $(date): ending now)"
569 ########### end section including li/lj ###############
571 pi ${p4[@]} $(apt-cache search ruby[.0-9]+-doc| awk '{print $1}')
576 l="deb http://ppa.launchpad.net/ansible/ansible/ubuntu xenial main"
577 f=/etc/apt/sources.list.d/ansible-ubuntu-ansible-xenial.list
578 if ! grep -qF "$l" $f; then
579 s add-apt-repository -y ppa:ansible/ansible
582 s pip install --upgrade pip
583 # newer 2.7 versions have a bug that incorrectly detects trisquel version. fixed once 2.8 arrives
585 pip install --user ansible=2.7.4
597 wget -qO - https://downloads.iridiumbrowser.de/ubuntu/iridium-release-sign-01.pub|sudo apt-key add -
598 cat <<EOF | sudo tee /etc/apt/sources.list.d/iridium-browser.list
599 deb [arch=amd64] https://downloads.iridiumbrowser.de/deb/ stable main
600 #deb-src https://downloads.iridiumbrowser.de/deb/ stable main
608 ### begin home vpn server setup
611 # # this section done initially to make persistent keys.
612 # # Also note, I temporarily set /etc/hosts so my host was
613 # # b8.nz when running this, since the vpn client config
614 # # generator assumes we need to go to that server to get
616 # vpn-server-setup -rds
617 # s cp -r --parents /etc/openvpn/easy-rsa/keys /p/c/filesystem
618 # s chown -R 1000:1000 /p/c/filesystem/etc/openvpn/easy-rsa/keys
619 # # kw = kgpe work machine.
620 # for host in x2 kw; do
621 # vpn-mk-client-cert -b $host -n home b8.nz 1196
622 # dir=/p/c/machine_specific/$host/filesystem/etc/openvpn/client
624 # s bash -c "cp /etc/openvpn/client/home* $dir"
625 # # note: /etc/update-resolv-conf-home also exists for all systems with /p
628 # key already exists, so this won't generate one, just the configs.
629 vpn-server-setup -rds
630 s tee -a /etc/openvpn/server/server.conf <<'EOF'
631 push "dhcp-option DNS 10.0.0.1"
632 push "route 10.0.0.0 255.255.0.0"
633 client-connect /a/bin/distro-setup/vpn-client-connect
635 s sed -i --follow-symlinks 's/10.8./10.9./g;s/^\s*port\s.*/port 1196/' /etc/openvpn/server/server.conf
637 if [[ $HOSTNAME == tp ]]; then
638 if [[ -e /lib/systemd/system/openvpn-server@.service ]]; then
639 vpn_service=openvpn-server@server
641 vpn_service=openvpn@server
645 ### end vpn server setup
649 # note, see bashrc for more documentation.
651 s dd of=/etc/systemd/system/rss2email.service <<'EOF'
653 Description=rss2email
654 After=multi-user.target
659 # about 24 hours of failures
660 # it copies over its files without respecting symlinks, so
661 # we pass options to use different location.
662 ExecStart=/a/bin/log-quiet/sysd-mail-once -288 rss2email r2e -d /p/c/rss2email.json -c /p/c/rss2email.cfg run
664 s dd of=/etc/systemd/system/rss2email.timer <<'EOF'
666 Description=rss2email
669 # for initial run. required.
671 # for subsequent runs.
672 OnUnitInactiveSec=300
675 WantedBy=timers.target
677 s systemctl daemon-reload
680 ######### begin pump.io periodic backup #############
681 if [[ $HOSTNAME == frodo ]]; then
682 s dd of=/etc/systemd/system/pumpbackup.service <<'EOF'
684 Description=pump li backup
685 After=multi-user.target
690 ExecStart=/a/bin/log-quiet/sysd-mail-once pump-backup /a/bin/distro-setup/pump-backup
692 s dd of=/etc/systemd/system/pumpbackup.timer <<'EOF'
694 Description=pump li backup hourly
700 WantedBy=timers.target
702 s systemctl daemon-reload
705 ######### end pump.io periodic backup #############
709 debian|trisquel|ubuntu)
710 # suggests because we want the resolvconf package. however, i install it earlier
711 # as well, so this is redundant.
712 # todo: check other distros to make sure it\'s installed
713 pi-nostart --install-suggests openvpn
714 # pi-nostart does not disable
720 /a/bin/distro-setup/radicale-setup
722 ## android studio setup
723 # this contains the setting for android sdk to point to
724 # /a/opt/androidsdk, which is asked upon first run
725 lnf /a/opt/.AndroidStudio2.2 ~
726 # android site says it needs a bunch of packages for ubuntu,
727 # but I googled for debian, and someone says you just need lib32stdc++6 plus the
729 # https://pid7007blog.blogspot.com/2015/07/installing-android-studio-in-debian-8.html
730 # see w.org for more android studio details
731 spa lib32stdc++6 default-jdk
734 ############# begin syncthing setup ###########
735 if [[ $HOSTNAME == frodo ]]; then
736 # It\'s simpler to just worry about running it in one place for now.
737 # I assume it would work to clone it\'s config to another non-phone
738 # and just run it in one place instead of the normal having a
739 # separate config. I lean toward using the same config, since btrfs
740 # syncs between comps.
742 arch) pi syncthing ;;
743 trisquel|ubuntu|debian)
744 # testing has relatively up to date packages
745 if ! isdebian-testing; then
746 # based on error when doing apt-get update:
747 # E: The method driver /usr/lib/apt/methods/https could not be found.
748 pi apt-transport-https
749 # google led me here:
750 # https://apt.syncthing.net/
751 curl -s https://syncthing.net/release-key.txt | sudo apt-key add -
752 s="deb http://apt.syncthing.net/ syncthing release"
753 if [[ $(cat /etc/apt/sources.list.d/syncthing.list) != $s ]]; then
754 echo "$s" | s dd of=/etc/apt/sources.list.d/syncthing.list
761 lnf -T /w/syncthing /home/iank/.config/syncthing
762 ser daemon-reload # syncthing likely not properly packaged
763 sgo syncthing@iank # runs as iank
765 # these things persist in ~/.config/syncthing, which I save in
766 # /w/syncthing (not in /p, because syncthing should continue to
767 # run on home server even when using laptop as primary device)
768 # open http://localhost:8384/
769 # change listen address from default to tcp://:22001,
770 # this is because we do port forward so it doesn\'t have to use
771 # some external server, but the syncthing is broken for port forward,
772 # you get a message, something "like connected to myself, this should not happen"
773 # when connecting to other local devices, so I bump the port up by 1,
775 # https://forum.syncthing.net/t/connected-to-myself-should-not-happen/1763/19.
776 # Without this, it was being stuck syncing at 0%.
777 # Set gui username and password.
779 # install syncthing via f-droid,
780 # folder setting, turn off send only.
781 # on phone, add device, click bar code icon
782 # on dekstop, top right, actions, device id
783 # after adding, notification will appear on desktop to confirm
785 # syncing folder. from phone to desktop: select desktop in the
786 # folder on phone\'s sync options, notification will appear in
787 # desktop\'s web ui within a minute. For the reverse, the
788 # notification will appear in android\'s notifications, you have to
789 # swipe down and tap it to add the folder. It won\'t appear in the
790 # syncthing ui, which would be intuitive, but don\'t wait for it
791 # there. The notification may not work, instead open the web gui
792 # from in the app, there should be a notification within there.
794 # On phone, set settings to run syncthing all the time, and
795 # show no notification.
797 # Folder versioning would make sense if I didn\'t already use btrfs
798 # for backups. I would choose staggered, or trash can for more space.
800 # if needed to install on a remote comp:
801 # ssh -L 8384:localhost:8384 -N frodo
802 # open http://localhost:8384/
804 # Note, the other thing i did was port forward port 22000,
805 # per https://docs.syncthing.net/users/firewall.html
808 ############# end syncthing setup ###########
812 ####### begin misc packages ###########
814 # sakura config is owned by ian
817 sudo -u traci -i reset-konsole
818 # traci xscreensaver we don't want to reset
822 # this would install from cabal for newer / consistent version across os, but it screws up xmonad, so disabled for now.
823 # this is also in primary-setup
824 # pi libxss-dev # dependency based on build failure
826 # cabal install --upgrade-dependencies --force-reinstalls arbtt
827 # also, i assume syncing this between machines somehow messed thin
828 #lnf -T /m/arbtt-capture.log ~/.arbtt/capture.log
832 if [[ ! -e ~/.linphonerc && -e /p/.linphonerc-initial ]]; then
833 cp /p/.linphonerc-initial ~/.linphonerc
837 ### begin spd install
838 pi libswitch-perl libdigest-md5-file-perl libgnupg-interface-perl
840 wget -O $t http://mirror.fsf.org/fsfsys-trisquel/fsfsys-trisquel/pool/main/s/spd-perl/spd-perl_0.2-1_amd64.deb
843 # this guesses at the appropriate directory, adjust if needed
844 x=(/usr/lib/x86_64-linux-gnu/perl/5.*)
845 sudo ln -sf ../../../perl/5.18.2/SPD/ $x
846 # newer distro had gpg2 as default, older one, flidas, need to make it that way
849 s mkdir -p /usr/local/spdhackfix
850 s lnf -T $x /usr/local/spdhackfix/gpg
855 if [[ $HOSTNAME == kw ]]; then
857 NOTE: after this finishes, i did
859 # remove br from auto:
860 s vim /etc/network/interfaces
864 # nagstamon setting which were set through the ui
866 # all unknown sources
867 # all warning services
868 # acknowledged hosts & services
869 # hosts & services down for maintenence
870 # services on down hosts
871 # services on hosts in maintenece
872 # services on unreachable osts
873 # hosts in soft state
874 # services in soft state
875 # in display tab: fullscreen
877 # these translate to these settings I think
878 # filter_acknowledged_hosts_services = True
879 # filter_all_unknown_services = True
880 # filter_all_warning_services = True
881 # filter_hosts_in_soft_state = True
882 # filter_hosts_services_maintenance = True
883 # filter_services_in_soft_state = True
884 # filter_services_on_down_hosts = True
885 # filter_services_on_hosts_in_maintenance = True
886 # filter_services_on_unreachable_hosts = True
887 # notify_if_up = False
888 # statusbar_floating = False
890 # but i'm just going to rely on the webpage plus sms for now.
894 debian|trisquel|ubuntu)
895 # it asks if it should make users in it's group capture packets without root,
896 # which is arguably more secure than running wireshark as root. default is no,
897 # which is what i prefer, since I plan to use tcpdump to input to wireshark.
898 s DEBIAN_FRONTEND=noninteractive pi wireshark-gtk
903 case $(debian-codename) in
904 # needed for debootstrap scripts for fai since fai requires debian
906 s dd of=/etc/apt/preferences.d/flidas-xenial <<EOF
908 Pin: release a=xenial
912 Pin: release a=xenial-updates
915 s dd of=/etc/apt/sources.list.d/xenial.list 2>/dev/null <<EOF
916 deb http://us.archive.ubuntu.com/ubuntu/ xenial main
917 deb http://us.archive.ubuntu.com/ubuntu/ xenial-updates main
919 curl http://archive.ubuntu.com/ubuntu/project/ubuntu-archive-keyring.gpg | s apt-key add -
924 s dd of=/etc/apt/preferences.d/flidas-xenial <<EOF
926 Pin: release a=xenial
930 Pin: release a=xenial-updates
933 aptitude download debootstrap
936 s cp ./usr/share/debootstrap/scripts/* /usr/share/debootstrap/scripts
941 # /run and /dev/shm are listed as required for pulseaudio. All 4 in the group
942 # listed in the default config as suggested.
943 # /run/usr/1000 i noticed was missing for pulseaudio
944 # /run/user/0 just seemed like a not bad idea, given the above
945 tu /etc/schroot/desktop/fstab <<'EOF'
946 /run /run none rw,bind 0 0
947 /run/lock /run/lock none rw,bind 0 0
948 /dev/shm /dev/shm none rw,bind 0 0
949 /run/shm /run/shm none rw,bind 0 0
950 /run/user/1000 /run/user/1000 none rw,bind 0 0
951 /run/user/1001 /run/user/1001 none rw,bind 0 0
952 /run/user/0 /run/user/0 none rw,bind 0 0
960 repo=http://archive.ubuntu.com/ubuntu/
963 repo=http://deb.debian.org/debian/
970 s dd of=/etc/schroot/chroot.d/$n.conf <<EOF
976 preserve-environment=true
979 if [[ -e $d/bin ]]; then
980 s chroot $d apt-get update
981 s chroot $d apt-get -y dist-upgrade --purge --auto-remove
982 cd; s schroot -c $n -- apt-get install --allow-unauthenticated -y ${apps[@]}
986 s debootstrap $n $d $repo
987 cd; s schroot -c $n -- apt-get install --allow-unauthenticated -y ${apps[@]}
989 s cp -P {,$d}/etc/localtime
991 s dd of=/etc/systemd/system/schrootupdate.service <<'EOF'
993 Description=schrootupdate
994 After=multi-user.target
998 ExecStart=/a/bin/log-quiet/sysd-mail-once schrootupdate /a/bin/distro-setup/schrootupdate
1000 s dd of=/etc/systemd/system/schrootupdate.timer <<'EOF'
1002 Description=schrootupdate
1005 OnCalendar=*-*-* 04:20:00
1008 WantedBy=timers.target
1010 s systemctl daemon-reload
1011 sgo schrootupdate.timer
1019 mkschroot debian stretch firefox-esr pulseaudio chromium
1023 s mkdir -p /nocow/user
1024 s chown $USER:$USER /nocow/user
1033 debian|trisquel|ubuntu)
1034 # note i had to do this, which is persistent:
1036 # s chgrp debian-transmission torrents partial-torrents
1038 # syslog says things like
1039 # 'Failed to set receive buffer: requested 4194304, got 425984'
1040 # google suggets giving it even more than that
1041 tu /etc/sysctl.conf<<'EOF'
1042 net.core.rmem_max = 67108864
1043 net.core.wmem_max = 16777216
1047 # some reason it doesn\'t seem to start automatically anyways
1048 pi-nostart transmission-daemon
1050 # the folder was moved here after an install around 02/2017.
1051 # it contains runtime data,
1052 # plus a simple symlink to the config file which it\'s
1053 # not worth separating out.
1054 # between comps, the uid can change
1055 f=/i/transmission-daemon
1056 s lnf -T $f /var/lib/transmission-daemon/.config/transmission-daemon
1057 if [[ -e $f ]]; then
1058 s chown -R debian-transmission:debian-transmission $f
1060 for f in /i/k/partial-torrents /i/k/torrents; do
1061 if [[ -e $f ]]; then
1062 s chown -R debian-transmission:traci $f
1065 s chown -R debian-transmission:debian-transmission /var/lib/transmission-daemon
1067 # config file documented here, and it\'s the same config
1068 # for daemon vs client, so it\'s documented in the gui.
1069 # https://trac.transmissionbt.com/wiki/EditConfigFiles#Options
1071 # I originaly setup rpc-whitelist, but after using
1072 # routing to a network namespace, it doesn\'t see the
1073 # real source address, so it\'s disabled.
1075 # Changed the cache-size to 256 mb, reduces disk use.
1076 # It is a read & write cache.
1080 p = '/etc/transmission-daemon/settings.json'
1081 File.write(p, JSON.pretty_generate(JSON.parse(File.read(p)).merge({
1082 'rpc-whitelist-enabled' => false,
1083 'rpc-authentication-required' => false,
1084 'incomplete-dir' => '/i/k/partial-torrents',
1085 'incomplete-dir-enabled' => true,
1086 'download-dir' => '/i/k/torrents',
1087 "speed-limit-up" => 800,
1088 "speed-limit-up-enabled" => true,
1089 "peer-port" => 61486,
1090 "cache-size-mb" => 256,
1091 "ratio-limit" => 5.0,
1092 "ratio-limit-enabled" => true,
1096 # make sure its not enabled, not sure if this is needed
1097 ser disable transmission-daemon
1099 # todo: others unknown
1101 # adapted from /var/lib/dpkg/info/transmission-daemon.postinst
1102 if ! getent passwd debian-transmission > /dev/null; then
1108 --home-dir /var/lib/transmission-daemon \
1109 --shell /bin/false \
1117 --disabled-password \
1118 --home /var/lib/transmission-daemon \
1125 # We want group writable stuff from transmission.
1126 # However, after setting this, I learn that transmission sets it's
1127 # own umask based on it's settings file. Well, no harm leaving this
1128 # so it's set right from the beginning.
1129 s chfn debian-transmission -o umask=0002
1131 # trisquel 8 = openvpn, debian stretch = openvpn-client
1132 vpn_ser=openvpn-client
1133 if [[ ! -e /lib/systemd/system/openvpn-client@.service ]]; then
1137 s dd of=/etc/systemd/system/transmission-daemon-nn.service <<EOF
1139 Description=Transmission BitTorrent Daemon netns
1140 After=network.target
1141 Requires=${vpn_ser}-nn@client.service
1142 After=${vpn_ser}-nn@client.service
1143 JoinsNamespaceOf=${vpn_ser}-nn@client.service
1146 #User=debian-transmission
1147 # notify type doesn't work with sudo
1149 ExecStart=/usr/bin/nsenter --mount=/root/mount_namespaces/client sudo -u debian-transmission /usr/bin/transmission-daemon -f --log-error
1150 ExecReload=/bin/kill -s HUP \$MAINPID
1155 WantedBy=multi-user.target
1159 if [[ $HOSTNAME == frodo ]]; then
1160 sgo transmission-daemon-nn
1164 ######### begin transmission client setup ######
1166 if [[ -e /p/transmission-rpc-pass ]]; then
1167 # arch had a default config,
1168 # debian had nothing until you start it.
1169 # With a little trial an error, here is a minimal config
1170 # taken from the generated one, plus changes that the
1171 # settings ui does, without a bunch of ui crap settings.
1173 # only settings I set were
1178 # the password is randomly generated on first run, i copied it out
1179 # so it could be used by other hosts.
1182 p = '/etc/transmission-daemon/settings.json'
1183 s = JSON.parse(File.read(p))
1184 s["rpc-password"] = File.read("/p/transmission-rpc-pass").chomp
1185 # default is 0022 (18 in decimal)
1187 File.write p, JSON.pretty_generate(s)
1190 rpc_pass=$(</p/transmission-rpc-pass)
1191 for f in /home/*; do
1192 d=$f/.config/transmission-remote-gtk
1195 s -u $u dd of=$d/config.json <<EOF
1199 "profile-name" : "Default",
1200 "hostname" : "transmission.b8.nz",
1201 "rpc-url-path" : "/transmission/rpc",
1203 "password" : "$rpc_pass",
1204 "auto-connect" : true,
1208 "update-active-only" : false,
1209 "activeonly-fullsync-enabled" : false,
1210 "activeonly-fullsync-every" : 2,
1211 "update-interval" : 3,
1212 "min-update-interval" : 3,
1213 "session-update-interval" : 60,
1221 "add-options-dialog" : false
1226 ######### end transmission client setup ######
1228 # dunno why it\'s there, but get rid of it
1230 li|lj) s rm -rf /home/linode ;;
1237 pi cups ghostscript gsfonts # from arch wiki cups page
1238 pi hplip # from google
1239 s gpasswd -a $USER sys # from arch wiki
1240 sgo org.cups.cupsd.service
1242 debian|trisquel|ubuntu)
1244 s gpasswd -a $USER lpadmin # based on ubuntu wiki
1247 # other distros unknown
1249 # goto http://127.0.0.1:631
1250 # administration tab, add new printer button.
1251 # In debian, I could use hte recommended driver,
1252 # in arch, I had to pick out the 6L driver.
1255 # allow user to run vms, from debian handbook
1256 for x in iank traci; do s usermod -a -G libvirt,kvm $x; done
1257 # bridge networking as user fails. google lead here, but it doesn\'t work:
1258 # oh well, I give up.
1259 # http://wiki.qemu.org/Features-Done/HelperNetworking
1261 # f=/etc/qemu/bridge.conf
1262 # s dd of=$f <<'EOF'
1265 # #s chown root:qemu $f # debian has somethig like qemu-libvirt. equivalent?
1268 # general known for debian/ubuntu, not for fedora
1271 debian|trisquel|ubuntu)
1272 # a bit of googling, and added settings to bashrc
1273 go get -u github.com/mvdan/fdroidcl/cmd/fdroidcl
1279 # otherwise we get error about accessing kvm module.
1280 # seems like there might be a better way, but google was a bit vague.
1281 s $sed -ri '/^ *user *=/d' /etc/libvirt/qemu.conf
1282 echo 'user = "root"' | s tee -a /etc/libvirt/qemu.conf
1283 # https://bbs.archlinux.org/viewtopic.php?id=206206
1284 # # this should prolly go in the wiki
1286 # guessing this is not needed
1287 #sgo virtlogd.service
1296 wget ftp://ftp.gnu.org/pub/gnu/global/global-6.5.7.tar.gz
1299 # based on https://github.com/leoliu/ggtags
1300 ./configure --with-exuberant-ctags=/usr/bin/ctags
1303 s pip install pygments
1311 debian|trisquel|ubuntu)
1319 # note this failed running at the beginning of this file,
1320 # because no systemd user instance was running.
1321 # Doing systemd --user resulted in
1322 # Trying to run as user instance, but $XDG_RUNTIME_DIR is not set
1324 if isdebian-testing; then
1325 # as of 7/2016, has no unstable deps, and is not in testing anymore.
1332 # # ubuntu unknown. probably the same as debian, just check if the
1333 # # init scripts come with the package.
1335 # # copied from arch, but moved to etc
1336 # s dd of=/etc/systemd/user/synergys.service <<'EOF'
1338 # Description=Synergy Server Daemon
1339 # After=network.target
1343 # ExecStart=/usr/bin/synergys --no-daemon --config /etc/synergy.conf
1344 # Restart=on-failure
1347 # WantedBy=multi-user.target
1349 # s dd of=/etc/systemd/user/synergys.socket <<'EOF'
1351 # Conflicts=synergys@.service
1354 # ListenStream=24800
1358 # WantedBy=sockets.target
1360 # # had this fail with 'Failed to connect to bus: No such file or directory'
1361 # # then when I tried it manually, it worked fine...
1362 # if ! systemctl --user daemon-reload; then
1364 # echo retrying systemd user daemon reload
1365 # systemctl --user daemon-reload
1369 # # taken from arch wiki.
1370 # s dd of=/etc/systemd/system/synergyc@.service <<'EOF'
1372 # Description=Synergy Client
1373 # After=network.target
1377 # ExecStart=/usr/bin/synergyc --no-daemon frodo
1378 # Restart=on-failure
1379 # # per man systemd.unit, StartLimitInterval, by default we
1380 # # restart more than 5 times in 10 seconds.
1381 # # And this param defaults too 200 miliseconds.
1385 # WantedBy=multi-user.target
1387 # s systemctl daemon-reload
1390 # ser enable synergyc@iank
1391 # ser start synergyc@iank ||: # X might not be running yet
1394 # systemctl --user start synergys ||:
1395 # systemctl --user enable synergys
1402 pi --no-install-recommends kdeconnect-plasma
1403 ### kdeconnect for gnome. started in /a/bin/distro-setup/desktop-20-autostart.sh
1404 ### but gnome + xmonad not working in flidas, so i disabled it
1405 pi libgtk-3-dev python3-requests-oauthlib valac cmake python-nautilus libappindicator3-dev
1406 cd /a/opt/indicator-kdeconnect
1409 cmake .. -DCMAKE_INSTALL_PREFIX=/usr
1412 # we can start it manually with /usr/lib/x86_64-linux-gnu/libexec/kdeconnectd
1413 # it seems, according to
1414 # /etc/xdg/autostart/kdeconnectd.desktop
1415 # I'm not seeing the icon, but the clipboard replication is working
1418 ### model 01 arduino support ###
1419 # https://github.com/keyboardio/Kaleidoscope/wiki/Install-Arduino-support-on-Linux
1420 # also built latest arduino in /a/opt/Arduino, (just cd build; ant build; ant run )
1421 # set arduino var in bashrc,
1422 # have system config file setup too.
1423 sudo adduser $USER dialout
1426 sudo usermod -a -G uucp $USER
1430 # this is for the mail command too. update-alternatives is kind of misleading
1431 # since at least it's main commands pretend mail does not exist.
1432 # bsd's mail got pulled in on some dumb dependency, i dunno how.
1433 s update-alternatives --set mailx /usr/bin/mail.mailutils
1435 ######### end misc packages #########
1438 # packages I once used before and liked, but don\'t want installed now for
1440 # python-sqlite is used for offlineimap
1441 # lxappearance python-sqlite dolphin paman dconf-editor
1447 # todo, finish configuring smart.
1450 # mostly from https://wiki.archlinux.org/index.php/S.M.A.R.T.
1451 # turn on smart. background on options:
1452 # first line, -a = test everyting on all devices.
1453 # -S on, turn on disk internal saving of vendor specific info,
1454 # from google, seems like this is usually already on and fairly standard.
1455 # -o on, turn on 4 hour period non-performance degrading testing.
1456 # short test daily 2-3am, extended tests Saturdays between 3-4am:
1457 sched="-s (S/../.././02|L/../../6/03)"
1458 s sed -i --follow-symlinks "s#^[[:space:]]*DEVICESCAN.*#\
1459 DEVICESCAN -a -o on -S on -n standby,q $sched \
1460 -m ian@iankelling.org -M exec /usr/local/bin/smart-notify#" /etc/smartd.conf
1462 # in the default configuration of at least ubuntu 14.04, resolvconf is
1463 # configured to order any nameservers associated with tun* or tap*
1464 # before the normal internet interfaces, which means they are always
1465 # consulted first. This is often slower and undesirable, ie. local dns
1466 # queries go from 0ms to 10+ or 100+ ms. To reverse the ordering, you
1468 #sudo sed -i --follow-symlinks '/tun\*\|tap\*/d' /etc/resolvconf/interface-order
1469 # however, this breaks dns lookup for hosts on the openvpn lan.
1470 # I can\'t figure out why hosts on the normal lan would not be
1471 # broken under the default ordering, except the host I was
1472 # testing with previously had an entry in /etc/hosts.
1474 ############# end unfinished
1476 ########### misc stuff
1478 # make my /etc/fonts/conf.d/ get used.
1479 # I have a new sans-serif font there because the default one
1480 # displays l and I as the same char, grrrrr.
1483 /a/bin/distro-setup/mymimes
1486 # stop autopoping windows when i plug in an android phone.
1487 # dbus-launch makes this work within an ssh connection, otherwise you get this message,
1488 # with still 0 exit code.
1489 # dconf-WARNING **: failed to commit changes to dconf: Cannot autolaunch D-Bus without X11 $DISPLAY
1490 dbus-launch gsettings set org.gnome.desktop.media-handling automount-open false
1493 # on grub upgrade, we get prompts unless we do this
1495 for dev in $(s btrfs fi show /boot | sed -nr 's#.*path\s+(\S+)$#\1#p'); do
1496 devs+=($(devbyid $dev),)
1498 devs[-1]=${devs[-1]%,} # jonied by commas
1499 s debconf-set-selections <<EOF
1500 grub-pc grub-pc/install_devices multiselect ${devs[*]}
1504 sgo btrfsmaint.timer
1505 sgo btrfsmaintstop.timer
1508 # the wiki backup script from ofswiki.org uses generic paths
1509 s lnf /p/c/machine_specific/li/mw_vars /root
1510 s lnf /k/backup/wiki_backup /root
1512 s cedit /etc/goaccess.conf <<'EOF' || [[ $? == 1 ]]
1513 # all things found from looking around the default config
1514 # copied existing NCSA Combined Log Format with Virtual Host, plus %L
1515 log-format %^:%^ %h %^[%d:%t %^] "%r" %s %b "%R" "%u" %D
1516 time-format %H:%M:%S
1517 date-format %d/%b/%Y
1518 log-file /var/log/apache2/access.log
1521 # tip: copy access.log files to a stretch host directory, then run
1522 # jessie's goaccess is too old for some options, and it\'s
1523 # not easily installed from a testing.
1524 # goaccess --ignore-crawlers -f <(cat *) -a -o html > x.html
1529 trisquel|ubuntu|debian)
1530 # unison-gtk second, i want it to be default, not sure if that works
1531 # with spa. note, I used to install from testing repo when using stable,
1532 # but it shouldn't be needed since I wrote a script to handle mismatching
1534 spa unison unison-gtk
1543 # default is alsa, doesn\'t work with with pianobar
1544 s dd of=/etc/libao.conf <<'EOF'
1545 default_driver=pulse
1550 # note, for jessie, it depends on a higher version of btrfs-tools.
1552 # # disabled due to my patch being in btrbk
1554 # arch|debian|trisquel|ubuntu) pi btrbk ;;
1560 # ian: temporarily disabled while hosts are in flux.
1561 # if [[ $HOSTNAME == tp ]]; then
1562 # # backup/sync manually on others hosts for now.
1564 # # note: to see when it was last run,
1570 In mate settings settings, change scrolling to two-finger,
1571 because the default edge scroll doesn\'t work. Originally found this in debian.
1576 # remove dep that came in with desktop
1583 debian|trisquel|ubuntu) s gpasswd -a iank adm ;; #needed for reading logs
1586 /a/bin/buildscripts/pithosfly
1591 # https://www.torproject.org/docs/rpms.html.en
1592 # https://www.torproject.org/docs/debian.html.en
1593 # todo: figure out if the running service needs to be restarted upon updates
1594 # todo on fedora: setup non-dev packages
1596 s dd of=/etc/yum.repos.d/torproject.repo <<'EOF'
1598 name=Tor experimental repo
1600 baseurl=http://deb.torproject.org/torproject.org/rpm/tor-testing/fc/20/$basearch/
1602 gpgkey=http://deb.torproject.org/torproject.org/rpm/RPM-GPG-KEY-torproject.org.asc
1605 name=Tor experimental source repo
1608 baseurl=http://deb.torproject.org/torproject.org/rpm/tor-testing/fc/20/SRPMS
1610 gpgkey=http://deb.torproject.org/torproject.org/rpm/RPM-GPG-KEY-torproject.org.asc
1613 # to be secure, take a look at the fingerprint reported from the following install, and see if it matches from the link above:
1614 # 3B9E EEB9 7B1E 827B CF0A 0D96 8AF5 653C 5AC0 01F1
1616 /a/bin/buildscripts/tor-browser
1619 tu /etc/apt/sources.list "deb http://deb.torproject.org/torproject.org $(debian-codename) main"
1620 gpg --keyserver keys.gnupg.net --recv 886DDD89
1621 gpg --export A3C4F0F979CAA22CDBA8F512EE8CBC9E886DDD89 | sudo apt-key add -
1623 pi deb.torproject.org-keyring
1625 /a/bin/buildscripts/tor-browser
1629 /a/bin/buildscripts/tor-browser
1632 pi tor tor-browser-en
1642 fedora todo: disable the firewall or find a way to automate it.
1643 there's an unused section in t.org for tramikssion firewall setup
1645 fedora manual config for nfs:
1647 change to permanent configuration
1648 check the box for nfs
1649 was hard to figure this out, not sure if this is all needed, but
1651 mountd: udp/tcp 20048
1652 portmapper, in firewall-config its called rpc-bind: udp/tcp 111
1653 troubleshooting, unblock things in rpcinfo -p
1654 make sure to reload the firewall to load the persistent configuration
1661 debian|trisquel|ubuntu)
1665 pi nfs-utils || pending_reboot=true
1667 # this failed until I rebooted
1672 # networkmanager has this nasty behavior on flidas: if the machine
1673 # crashes with dnsmasq running, on subsequent boot, it adds an entry to
1674 # resolvconf for 127.0.0.1 in some stupid attempt to restore
1676 # This can be manually fixed by stoping dnsmasq,
1677 # then based on whats in /run/dnsmasq/, i see we can run
1678 # s resolvconf -d NetworkManager
1679 # oh ya, and stoping NetworkManager leaves this crap behind without cleaning it up.
1680 ser stop NetworkManager
1681 ser disable NetworkManager
1684 if [[ $HOSTNAME == frodo ]]; then
1685 # nohide = export filesystems mounted deeper than the export point
1686 # fsid=0 makes this export the "root" export
1687 # not documented in the man page, but this means
1688 # 1. it can be mounted with a shorthand of server:/
1689 # 2. exports that are subdirectories of this one will automatically be mounted
1690 tu /etc/exports <<'EOF'
1691 /k 10.0.0.0/24(rw,fsid=0,nohide,no_root_squash,async,no_subtree_check,insecure)
1701 # if I was going to create a persistent vm, i might do it like this:
1702 # variant=something # from: virt-install --os-variant list
1703 # s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
1704 # --disk=/a/images/some_name.qcow2,bus=virtio --vcpus 2 -r 4096 -w bridge=br0 \
1705 # -n some_name --import --os-variant $variant --cpu host-model-only
1709 ######### begin stuff belonging at the end ##########
1712 if $pending_reboot; then
1713 echo "$0: pending reboot and then finished. doing it now."
1716 echo "$0: $(date): ending now)"