2 # Copyright (C) 2016 Ian Kelling
4 # Licensed under the Apache License, Version 2.0 (the "License");
5 # you may not use this file except in compliance with the License.
6 # You may obtain a copy of the License at
8 # http://www.apache.org/licenses/LICENSE-2.0
10 # Unless required by applicable law or agreed to in writing, software
11 # distributed under the License is distributed on an "AS IS" BASIS,
12 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 # See the License for the specific language governing permissions and
14 # limitations under the License.
17 source /a
/bin
/errhandle
/err
18 src
="${BASH_SOURCE%/*}"
22 exec &> >(sudo
tee -a /var
/log
/distro-end
)
23 echo "$0: $(date): starting now)"
24 # see example of usage to understand.
27 IFS
= read -r -d '' y ||
:
30 spa
() { # simple package add
35 sed="sed --follow-symlinks"
46 ########### begin section including li ################
47 pi
${p3[@]} $
($src/distro-pkgs
)
65 # no equivalent in other distros:
67 debian|trisquel|ubuntu
)
68 if ! dpkg
-s apt-file
&>/dev
/null
; then
69 # this condition is just a speed optimization
79 # allows me to pipe with ssh -t, and gets rid of spam
80 # http://forums.debian.net/viewtopic.php?f=5&t=85822
81 # i'd rather disable the service than comment the init file
82 # this says disabling the service, it will still get restarted
83 # but this script doesn't do anything on restart, so it should be fine
84 s
dd of
=/var
/run
/motd.dynamic
if=/dev
/null
85 # stretch doesn't have initscripts pkg installed by default
86 if [[ $
(debian-codename
) == jessie
]]; then
87 s update-rc.d motd disable
91 # this isn't a complete solution. It still shows me when updates are available,
92 # but it's no big deal.
93 s t
/etc
/update-motd.d
/10-help-text /etc
/update-motd.d
/00-header
99 # https://debian-handbook.info/browse/stable/sect.regular-upgrades.html
100 # /etc/cron.daily/apt calls unattended-upgrades
101 # /usr/share/doc/unattended-upgrades# cat README.md
102 # /etc/apt/apt.conf.d/50unattended-upgrades
104 setup-debian-auto-update
108 ### begin docker install ####
110 # https://store.docker.com/editions/community/docker-ce-server-debian?tab=description
111 pi software-properties-common apt-transport-https
112 curl
-fsSL https
://download.docker.com
/linux
/$
(distro-name-compat
)/gpg | sudo apt-key add
-
113 url
=https
://download.docker.com
/linux
/$
(distro-name-compat
)
114 l
="deb [arch=amd64] $url $(debian-codename-compat) stable"
116 if ! grep -xFq "$l" /etc
/apt
/sources.list
{,.d
/*.list
}; then
117 sudo add-apt-repository
$l
120 # docker eats up a fair amount of cpu when doing nothing, so don't enable it unless
123 # and docker is even more crap, it ignores that it shouldnt start
129 # other distros unknown
131 ### end docker install ####
134 ### begin certbot install ###
137 # note, need python-certbot-nginx for nginx, but it depends on nginx,
138 # and I'm not installing nginx by default right now.
139 # note python-certbot-apache is in suggests, but so is a doc package that brought in xorg
140 if [[ $
(debian-codename
) == jessie
]]; then
141 pi
-t jessie-backports certbot python-certbot-apache
143 pi certbot python-certbot-apache
147 # not packaged in xenial or flidas
148 pi software-properties-common
149 l
="deb http://ppa.launchpad.net/certbot/certbot/ubuntu xenial main"
150 if ! grep -xFq "$l" /etc
/apt
/sources.list
{,.d
/*.list
}; then
151 s add-apt-repository
-y ppa
:certbot
/certbot ||
:
154 pi python-certbot-apache
156 # todo: other distros unknown
158 # make a version of the certbot timer that emails me.
159 x
=/systemd
/system
/certbot
160 $sed -r -f - /lib
$x.timer
<<'EOF' |s dd of=/etc${x}mail.timer
161 s,^Description.*,\0 mail version,
163 $sed -r -f - /lib
$x.service
<<'EOF' |s dd of=/etc${x}mail.service
164 s,(ExecStart=)(/usr/bin/certbot),\1/a/bin/log-quiet/sysd-mail-once certbotmail \2 --renew-hook /a/bin/distro-setup/certbot-renew-hook,
167 sgo certbotmail.timer
168 ### end certbot install ###
171 # dogcam setup. not using atm
174 # /a/bin/webcam/install-server
177 # /a/bin/webcam/install-client
187 lj
) domain
=iank.bid
; exit 0 ;;
188 li
) domain
=iankelling.org
;;
190 /a
/h
/setup.sh
$domain
193 sudo
-E /a
/bin
/mediawiki-setup
/mw-setup-script
195 pi-nostart mumble-server
196 s
$sed -ri "s/^ *(serverpassword=).*/\1$(< /a/bin/bash_unpublished/mumble_pass)/" /etc
/mumble-server.ini
198 # do certificate to avoid warning about unsigned cert,
199 # which is overkill for my use, but hey, I'm cool, I know
201 web-conf apache2 mumble.iankelling.org
202 s
rm -f /etc
/apache
2/sites-enabled
/mumble.iankelling.org
204 export RENEWED_LINEAGE=/etc/letsencrypt/live/mumble.iankelling.org
205 /a/bin/distro-setup/certbot-renew-hook
211 s
tee /etc
/openvpn
/client-config
/mail <<'EOF'
212 ifconfig-push 10.8.0.4 255.255.255.0
215 # it\'s strange. docker seems to make the default for forward
216 # be drop, but then I set it to accept and it\'s stuck that way,
217 # I dun know why. But, let\'s make sure we can forward anyways.
218 s DEBIAN_FRONTEND
=noninteractive pi iptables-persistent
219 rm /etc
/iptables
/rules.v6
220 s
tee /etc
/iptables
/rules.v4
<<'EOF'
222 -A FORWARD -i tun+ -o eth0 -j ACCEPT
223 -A FORWARD -i eth0 -o tun+ -j ACCEPT
228 sudo
dd of
=/etc
/systemd
/system
/vpnmail.service
<<EOF
230 Description=Turns on iptables mail nat
235 ExecStart=/a/bin/distro-setup/vpn-mail-forward start
236 ExecStop=/a/bin/distro-setup/vpn-mail-forward stop
239 WantedBy=openvpn.service
242 ser
enable vpnmail.service
243 # needed for li's local mail delivery.
244 tu
/etc
/hosts
<<<"10.8.0.4 mail.iankelling.org"
245 if [[ -e /lib/systemd/system/openvpn-server@.service ]]; then
246 vpn_service=openvpn-server@server
248 vpn_service=openvpn@server
251 # setup let's encrypt cert
252 web-conf apache2 mail.iankelling.org
253 s rm /etc/apache2/sites-enabled/mail.iankelling.org{,-redir}.conf
256 domain=cal.iankelling.org
257 web-conf -f 10.8.0.4:5232 - apache2 $domain <<'EOF'
258 #https://httpd.apache.org/docs/2.4/mod/mod_authn_core.html#authtype
259 # https://stackoverflow.com/questions/5011102/apache-reverse-proxy-with-basic-authentication
261 Options +FollowSymLinks +Multiviews +Indexes
264 AuthName "Authentication Required"
265 # setup one time, with root:www-data, 640
266 AuthUserFile "/etc/caldav-htpasswd"
270 # nginx version of above would be:
271 # auth_basic "Not currently available";
272 # auth_basic_user_file /etc/nginx/caldav/htpasswd;
275 ########## begin pump.io setup ##########
277 # once pump adds a logrotation script, turn off nologger,
279 # "logfile": "/var/log/pumpio/pumpio.log",
281 s dd of=/etc/pump.io.json <<'EOF'
283 "secret": "SECRET_REPLACE_ME",
285 "params": { "dbname": "pumpio" },
287 "site": "pump.iankelling.org",
288 "owner": "Ian Kelling",
289 "ownerURL": "https://iankelling.org/",
292 "hostname": "pump.iankelling.org",
294 "datadir": "/home/pumpio/pumpdata",
295 "enableUploads": true,
296 "debugClient": false,
297 "disableRegistration": true,
299 "key": "/home/pumpio/privkey.pem",
300 "cert": "/home/pumpio/fullchain.pem",
301 "address": "localhost",
305 s sed -i "s#SECRET_REPLACE_ME#$(cat /p/c/machine_specific/li/pump-secret)#" /etc/pump.io.json
307 # stretch node is too old
308 # https://nodejs.org/en/download/package-manager/
309 curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash -
310 pi nodejs graphicsmagick mongodb
312 if [[ -e pump.io ]]; then
316 git clone https://github.com/pump-io/pump.io.git
319 # note: these 2 commands seem
320 # note: doing this or the npm install pump.io as root had problems.
323 # normally, next command would be
324 # s npm install -g odb
325 # but it\'s this until a bug in pump gets fixed
326 # https://github.com/pump-io/pump.io/issues/1287
327 s npm install -g databank-mongodb@0.19.2
328 if ! getent passwd pumpio &>/dev/null; then
329 s useradd -Um -s /bin/false pumpio
331 sudo -u pumpio mkdir -p /home/pumpio/pumpdata
332 # for testing browser when only listening to localhost,
333 # in the pump.io.json, set hostname localhost, urlPort 5233
334 #ssh -L 5233:localhost:5233 li
336 s mkdir -p /var/log/pumpio/
337 s chown pumpio:pumpio /var/log/pumpio/
339 web-conf - apache2 pump.iankelling.org <<'EOF'
340 # currently a bug in pump that we cant terminate ssl
343 ProxyPass / https://127.0.0.1:8001/
344 ProxyPassReverse / https://127.0.0.1:8001/
345 # i have sockjs disabled per people suggesting that
346 # it won\'t work with apache right now.
347 # not sure if it would work with this,
348 # but afaik, this is pointless atm.
349 <Location /main/realtime/sockjs/>
350 ProxyPass wss://127.0.0.1:8001/main/realtime/sockjs/
351 ProxyPassReverse wss://127.0.0.1:8001/main/realtime/sockjs/
356 export RENEWED_LINEAGE=/etc/letsencrypt/live/pump.iankelling.org
357 /a/bin/distro-setup/certbot-renew-hook
360 s dd of=/etc/systemd/system/pump.service <<'EOF'
363 After=syslog.target network.target mongodb.service
364 Requires=mongodb.service
370 ExecStart=/home/iank/pump.io/bin/pump
371 Environment=NODE_ENV=production
372 # failed to find databank-mongodb without this.
373 # I just looked at my environment variables took a guess.
374 Environment=NODE_PATH=/usr/lib/nodejs:/usr/lib/node_modules:/usr/share/javascript
377 WantedBy=multi-user.target
381 ########## end pump.io setup ############
384 ############# begin setup mastodon ##############
386 # main doc is Docker-Guide.md in docs repo
388 # I'd like to try gnu social just cuz of gnu, but it's not being
389 # well maintained, for example, simple pull requests
391 # https://git.gnu.io/gnu/gnu-social/merge_requests/143
392 # and I submitted my own bugs, basic docs are broken
393 # https://git.gnu.io/gnu/gnu-social/issues/269
395 # note, docker required, but we installed it earlier
397 # i subscrubed to https://github.com/docker/compose/releases.atom
398 # to see release notes.
399 # i had some problems upgrading. blew things away with
400 # docker-compose down
401 # docker rmi $(docker images -q)
403 # when running docker-compose run, kernel stack traces are printed to the journal.
404 # things seem to succeed, google says nothing, so ignoring them.
405 curl -L https://github.com/docker/compose/releases/download/1.18.0/docker-compose-`uname -s`-`uname -m` | s dd of=/usr/local/bin/docker-compose
406 s chmod +x /usr/local/bin/docker-compose
411 i clone https://github.com/tootsuite/mastodon
413 # subbed to atom feed to deal with updates
414 git checkout $(git tag | grep -v rc | tail -n1)
416 # per instructions, uncomment redis/postgres persistence in docker-compose.yml
417 sed -i 's/^#//' docker-compose.yml
419 cat >.env.production <<'EOF'
428 LOCAL_DOMAIN=mast.iankelling.org
431 SINGLE_USER_MODE=true
433 SMTP_SERVER=mail.iankelling.org
436 SMTP_FROM_ADDRESS=notifications@mast.iankelling.org
437 SMTP_DOMAIN=mast.iankelling.org
438 SMTP_DELIVERY_METHOD=smtp
441 for key in PAPERCLIP_SECRET SECRET_KEY_BASE OTP_SECRET; do
442 # 1 minute 7 seconds to run this docker command
443 # to generate a secret, and it has ^M chars at the end. wtf. really dumb
444 printf "%s=%s\n" $key "$(docker-compose run --rm web rake secret|dos2unix|tail -n1)" >>.env.production
447 while read -r domain port pass; do
448 if [[ $domain == mail.iankelling.org ]]; then
450 # remove the username part
452 printf "SMTP_PASSWORD=%s\n" "$pass" >>.env.production
455 done < <(s cat /etc/mailpass)
457 echo "$0: error, failed to find mailpass domain for mastadon"
461 # docker compose makes an interface named like br-8f3e208558f2. we need mail to
463 if ! s /sbin/iptables -t nat -C PREROUTING -i br-+ -p tcp -m tcp --dport 25 -j DNAT --to-destination 10.8.0.4:25; then
464 s /sbin/iptables -t nat -A PREROUTING -i br-+ -p tcp -m tcp --dport 25 -j DNAT --to-destination 10.8.0.4:25
467 docker-compose run --rm web rake mastodon:webpush:generate_vapid_key | grep -E '^VAPID_PUBLIC_KEY=|^VAPID_PRIVATE_KEY=' >> .env.production
468 logq docker-compose run --rm web rake db:migrate
469 docker-compose run --rm web rails assets:precompile
471 # avatar failed to upload, did
472 # docker logs mastodon_web_1
473 # google lead me to this
474 s chown -R 991:991 public/system
476 # docker daemon takes care of starting on boot.
479 s a2enmod proxy_wstunnel headers
480 web-conf -f 3000 - apache2 mast.iankelling.org <<'EOF'
482 RequestHeader set X-Forwarded-Proto "https"
483 ProxyPass /500.html !
484 ProxyPass /oops.png !
485 ProxyPass /api/v1/streaming/ ws://localhost:4000/
486 ProxyPassReverse /api/v1/streaming/ ws://localhost:4000/
487 ErrorDocument 500 /500.html
488 ErrorDocument 501 /500.html
489 ErrorDocument 502 /500.html
490 ErrorDocument 503 /500.html
491 ErrorDocument 504 /500.html
495 ############### !!!!!!!!!!!!!!!!!
496 ############### manual steps:
498 # only following a few people atm, so not bothering to figure out backups
499 # when mastodon has not documented it at all.
504 # johns@status.fsf.org
506 # sign in page is at https://mast.iankelling.org/auth/sign_in
507 # register as iank, then
508 # https://github.com/tootsuite/documentation/blob/master/Running-Mastodon/Administration-guide.md
509 # docker-compose run --rm web bundle exec rails mastodon:make_admin USERNAME=iank
511 ############# end setup mastodon ##############
513 # we use nsupdate to update the ip of home
517 # znc config generated by doing
519 # selected port is also used in erc config
520 # comma separated channel list worked.
521 # while figuring things out, running znc -D for debug in foreground.
522 # to exit and save config:
523 # /msg *status shutdown
524 # configed auth on freenode by following
525 # https://wiki.znc.in/Sasl:
526 # /msg *sasl RequireAuth yes
527 # /msg *sasl Mechanism PLAIN
528 # /msg *sasl Set ident_name password
529 # created the system service after, and had to do
530 # mv /home/iank/.znc/* /var/lib/znc
531 # sed -i 's,/home/iank/.znc/,/var/lib/znc,' /var/lib/znc/config/znc.conf
532 # and made a copy of the config files into /p/c
533 # /msg *status LoadMod --type=global log -sanitize
534 # to get into the web interface,
535 # cat /etc/letsencrypt/live/iankelling.org/{privkey,cert,chain}.pem > /var/lib/znc/znc.pem
536 # then use non-main browser or else it doesn't allow it based on ocsp stapling from my main site.
537 # https://iankelling.org:12533/
538 # i'm going to figure out how to automate this when it expires. i know i can hook a script into the renewal. https://wiki.znc.in/FAQ seems to imply that znc doesn\'t need restart.
539 # todo: in config file AllowWeb = true should be false. better security if that is off unless we need it.
540 # /msg *status LoadMod --type=network perform
541 # /msg *perform add PRIVMSG ChanServ :invite #fsf-office
542 # /msg *perform add JOIN #fsf-office
545 # also ran /znc LoadMod clearbufferonmsg
546 # it would be nice if erc supported erc query buffers by doing
547 # /msg *status clearbuffer <name of the query/receiver
549 # an example seems to be here: https://github.com/zenspider/elisp/blob/master/rwd-irc.el
550 # if that was the case i could remove the module clearbufferonmsg
551 # alo would be nice if erc supported
552 # https://wiki.znc.in/self-message
553 # https://wiki.znc.in/Query_buffers \
555 s useradd --create-home -d /var/lib/znc --system --shell /sbin/nologin --comment "Account to run ZNC daemon" --user-group znc || [[ $? == 9 ]] # 9 if it exists already
556 chmod 700 /var/lib/znc
557 s chown -R znc:znc /var/lib/znc
558 s dd of=/etc/systemd/system/znc.service 2>/dev/null <<'EOF'
560 Description=ZNC, an advanced IRC bouncer
561 After=network-online.target
564 ExecStart=/usr/bin/znc -f --datadir=/var/lib/znc
568 WantedBy=multi-user.target
573 echo "$0: $(date): ending now)"
578 ########### end section including li/lj ###############
580 # depends gcc is a way to install suggests. this is apparently the only
581 # way to install suggests even if the main package is already
582 # installed. reinstall doesn't work, uninstalling can cause removing
583 # dependent packages.
584 pi ${pall[@]} $(apt-cache search ruby[.0-9]+-doc| awk '{print $1}') $(apt-cache depends gcc|grep -i suggests:| awk '{print $2}')
588 wget -O$x https://bootstrap.pypa.io/get-pip.py
592 sgo fsf-vpn-dns-cleanup
599 wget -qO - https://downloads.iridiumbrowser.de/ubuntu/iridium-release-sign-01.pub|sudo apt-key add -
602 deb [arch=amd64] https://downloads.iridiumbrowser.de/deb/ stable main
603 #deb-src https://downloads.iridiumbrowser.de/deb/ stable main
605 f=/etc/apt/sources.list.d/iridium-browser.list
606 if ! diff -q $t $f; then
616 ### begin home vpn server setup
619 # # this section done initially to make persistent keys.
620 # # Also note, I temporarily set /etc/hosts so my host was
621 # # b8.nz when running this, since the vpn client config
622 # # generator assumes we need to go to that server to get
624 # vpn-server-setup -rds
625 # s cp -r --parents /etc/openvpn/easy-rsa/keys /p/c/filesystem
626 # s chown -R 1000:1000 /p/c/filesystem/etc/openvpn/easy-rsa/keys
627 # # kw = kgpe work machine.
628 # for host in x2 x3 kw; do
629 # vpn-mk-client-cert -b $host -n home b8.nz 1196
630 # dir=/p/c/machine_specific/$host/filesystem/etc/openvpn/client
632 # s bash -c "cp /etc/openvpn/client/home* $dir"
633 # # note: /etc/update-resolv-conf-home also exists for all systems with /p
636 # key already exists, so this won't generate one, just the configs.
637 vpn-server-setup -rds
638 s tee -a /etc/openvpn/server/server.conf <<'EOF'
639 push "dhcp-option DNS 10.0.0.1"
640 push "route 10.0.0.0 255.255.0.0"
641 client-connect /a/bin/distro-setup/vpn-client-connect
643 s sed -i --follow-symlinks 's/10.8./10.9./g;s/^\s*port\s.*/port 1196/' /etc/openvpn/server/server.conf
645 if [[ $HOSTNAME == tp ]]; then
646 if [[ -e /lib/systemd/system/openvpn-server@.service ]]; then
647 vpn_service=openvpn-server@server
649 vpn_service=openvpn@server
653 ### end vpn server setup
657 # note, see bashrc for more documentation.
659 s dd of=/etc/systemd/system/rss2email.service <<'EOF'
661 Description=rss2email
662 After=multi-user.target
667 # about 24 hours of failures
668 # it copies over its files without respecting symlinks, so
669 # we pass options to use different location.
670 ExecStart=/a/bin/log-quiet/sysd-mail-once -288 rss2email r2e -d /p/c/rss2email.json -c /p/c/rss2email.cfg run
672 s dd of=/etc/systemd/system/rss2email.timer <<'EOF'
674 Description=rss2email
677 # for initial run. required.
679 # for subsequent runs.
680 OnUnitInactiveSec=300
683 WantedBy=timers.target
685 s systemctl daemon-reload
688 ######### begin pump.io periodic backup #############
689 if [[ $HOSTNAME == frodo ]]; then
690 s dd of=/etc/systemd/system/pumpbackup.service <<'EOF'
692 Description=pump li backup
693 After=multi-user.target
698 ExecStart=/a/bin/log-quiet/sysd-mail-once pump-backup /a/bin/distro-setup/pump-backup
700 s dd of=/etc/systemd/system/pumpbackup.timer <<'EOF'
702 Description=pump li backup hourly
708 WantedBy=timers.target
710 s systemctl daemon-reload
713 ######### end pump.io periodic backup #############
717 debian|trisquel|ubuntu)
718 # suggests resolvconf package. installing it here is redundant, but make sure anyways.
719 # todo: check other distros to make sure it\'s installed
720 pi-nostart openvpn resolvconf
721 # pi-nostart does not disable
727 /a/bin/distro-setup/radicale-setup
729 ## android studio setup
730 # this contains the setting for android sdk to point to
731 # /a/opt/androidsdk, which is asked upon first run
732 lnf /a/opt/.AndroidStudio2.2 ~
733 # android site says it needs a bunch of packages for ubuntu,
734 # but I googled for debian, and someone says you just need lib32stdc++6 plus the
736 # https://pid7007blog.blogspot.com/2015/07/installing-android-studio-in-debian-8.html
737 # see w.org for more android studio details
738 spa lib32stdc++6 default-jdk
741 ############# begin syncthing setup ###########
742 if [[ $HOSTNAME == frodo ]]; then
743 # It\'s simpler to just worry about running it in one place for now.
744 # I assume it would work to clone it\'s config to another non-phone
745 # and just run it in one place instead of the normal having a
746 # separate config. I lean toward using the same config, since btrfs
747 # syncs between comps.
749 arch) pi syncthing ;;
750 trisquel|ubuntu|debian)
751 # testing has relatively up to date packages
752 if ! isdebian-testing; then
753 # based on error when doing apt-get update:
754 # E: The method driver /usr/lib/apt/methods/https could not be found.
755 pi apt-transport-https
756 # google led me here:
757 # https://apt.syncthing.net/
758 curl -s https://syncthing.net/release-key.txt | sudo apt-key add -
759 s="deb http://apt.syncthing.net/ syncthing release"
760 if [[ $(cat /etc/apt/sources.list.d/syncthing.list) != $s ]]; then
761 echo "$s" | s dd of=/etc/apt/sources.list.d/syncthing.list
768 lnf -T /w/syncthing /home/iank/.config/syncthing
769 ser daemon-reload # syncthing likely not properly packaged
770 sgo syncthing@iank # runs as iank
772 # these things persist in ~/.config/syncthing, which I save in
773 # /w/syncthing (not in /p, because syncthing should continue to
774 # run on home server even when using laptop as primary device)
775 # open http://localhost:8384/
776 # change listen address from default to tcp://:22001,
777 # this is because we do port forward so it doesn\'t have to use
778 # some external server, but the syncthing is broken for port forward,
779 # you get a message, something "like connected to myself, this should not happen"
780 # when connecting to other local devices, so I bump the port up by 1,
782 # https://forum.syncthing.net/t/connected-to-myself-should-not-happen/1763/19.
783 # Without this, it was being stuck syncing at 0%.
784 # Set gui username and password.
786 # install syncthing via f-droid,
787 # folder setting, turn off send only.
788 # on phone, add device, click bar code icon
789 # on dekstop, top right, actions, device id
790 # after adding, notification will appear on desktop to confirm
792 # syncing folder. from phone to desktop: select desktop in the
793 # folder on phone\'s sync options, notification will appear in
794 # desktop\'s web ui within a minute. For the reverse, the
795 # notification will appear in android\'s notifications, you have to
796 # swipe down and tap it to add the folder. It won\'t appear in the
797 # syncthing ui, which would be intuitive, but don\'t wait for it
798 # there. The notification may not work, instead open the web gui
799 # from in the app, there should be a notification within there.
801 # On phone, set settings to run syncthing all the time, and
802 # show no notification.
804 # Folder versioning would make sense if I didn\'t already use btrfs
805 # for backups. I would choose staggered, or trash can for more space.
807 # if needed to install on a remote comp:
808 # ssh -L 8384:localhost:8384 -N frodo
809 # open http://localhost:8384/
811 # Note, the other thing i did was port forward port 22000,
812 # per https://docs.syncthing.net/users/firewall.html
815 ############# end syncthing setup ###########
819 ####### begin misc packages ###########
821 # sakura config is owned by ian
824 sudo -u traci -i reset-konsole
825 # traci xscreensaver we don't want to reset
829 # this would install from cabal for newer / consistent version across os, but it screws up xmonad, so disabled for now.
830 # this is also in primary-setup
831 # pi libxss-dev # dependency based on build failure
833 # cabal install --upgrade-dependencies --force-reinstalls arbtt
834 # also, i assume syncing this between machines somehow messed thin
835 #lnf -T /m/arbtt-capture.log ~/.arbtt/capture.log
839 if [[ ! -e ~/.linphonerc && -e /p/.linphonerc-initial ]]; then
840 cp /p/.linphonerc-initial ~/.linphonerc
844 ### begin spd install
845 pi libswitch-perl libdigest-md5-file-perl libgnupg-interface-perl
847 wget -O $t http://mirror.fsf.org/fsfsys-trisquel/fsfsys-trisquel/pool/main/s/spd-perl/spd-perl_0.2-1_amd64.deb
850 # this guesses at the appropriate directory, adjust if needed
851 x=(/usr/lib/x86_64-linux-gnu/perl/5.*)
852 sudo ln -sf ../../../perl/5.18.2/SPD/ $x
853 # newer distro had gpg2 as default, older one, flidas, need to make it that way
856 s mkdir -p /usr/local/spdhackfix
857 s lnf -T $x /usr/local/spdhackfix/gpg
862 if [[ $HOSTNAME == kw ]]; then
864 NOTE: after this finishes, i did
866 # remove br from auto:
867 s vim /etc/network/interfaces
871 # nagstamon setting which were set through the ui
873 # all unknown sources
874 # all warning services
875 # acknowledged hosts & services
876 # hosts & services down for maintenence
877 # services on down hosts
878 # services on hosts in maintenece
879 # services on unreachable osts
880 # hosts in soft state
881 # services in soft state
882 # in display tab: fullscreen
884 # these translate to these settings I think
885 # filter_acknowledged_hosts_services = True
886 # filter_all_unknown_services = True
887 # filter_all_warning_services = True
888 # filter_hosts_in_soft_state = True
889 # filter_hosts_services_maintenance = True
890 # filter_services_in_soft_state = True
891 # filter_services_on_down_hosts = True
892 # filter_services_on_hosts_in_maintenance = True
893 # filter_services_on_unreachable_hosts = True
894 # notify_if_up = False
895 # statusbar_floating = False
897 # but i'm just going to rely on the webpage plus sms for now.
901 debian|trisquel|ubuntu)
902 # it asks if it should make users in it's group capture packets without root,
903 # which is arguably more secure than running wireshark as root. default is no,
904 # which is what i prefer, since I plan to use tcpdump to input to wireshark.
905 s DEBIAN_FRONTEND=noninteractive pi wireshark-gtk
910 case $(debian-codename) in
911 # needed for debootstrap scripts for fai since fai requires debian
913 curl http://archive.ubuntu.com/ubuntu/project/ubuntu-archive-keyring.gpg | s apt-key add -
914 s dd of=/etc/apt/preferences.d/flidas-xenial <<EOF
916 Pin: release a=xenial
920 Pin: release a=xenial-updates
924 Pin: release a=xenial-security
927 s dd of=/etc/apt/sources.list.d/xenial.list 2>/dev/null <<EOF
928 deb http://us.archive.ubuntu.com/ubuntu/ xenial main
929 deb http://us.archive.ubuntu.com/ubuntu/ xenial-updates main
930 deb http://us.archive.ubuntu.com/ubuntu/ xenial-security main
933 s apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 3B4FE6ACC0B21F32
934 s dd of=/etc/apt/preferences.d/flidas-bionic <<EOF
936 Pin: release a=bionic
940 Pin: release a=bionic-updates
944 Pin: release a=bionic-security
948 # better to run btrfs-progs which matches our kernel version
949 # (note, renamed from btrfs-tools)
950 s dd of=/etc/apt/preferences.d/btrfs-progs <<EOF
951 Package: btrfs-progs libzstd1
952 Pin: release a=bionic
955 Package: btrfs-progs libzstd1
956 Pin: release a=bionic-updates
959 Package: btrfs-progs libzstd1
960 Pin: release a=bionic-security
967 deb http://us.archive.ubuntu.com/ubuntu/ bionic main
968 deb http://us.archive.ubuntu.com/ubuntu/ bionic-updates main
969 deb http://us.archive.ubuntu.com/ubuntu/ bionic-security main
971 f=/etc/apt/sources.list.d/bionic.list
972 if ! diff -q $t $f; then
978 # no special reason, but its better for btrfs-progs to
979 # be closer to our kernel version
984 aptitude download debootstrap/xenial
987 s cp ./usr/share/debootstrap/scripts/* /usr/share/debootstrap/scripts
992 # /run and /dev/shm are listed as required for pulseaudio. All 4 in the group
993 # listed in the default config as suggested.
994 # /run/usr/1000 i noticed was missing for pulseaudio
995 # /run/user/0 just seemed like a not bad idea, given the above
996 tu /etc/schroot/desktop/fstab <<'EOF'
997 /run /run none rw,bind 0 0
998 /run/lock /run/lock none rw,bind 0 0
999 /dev/shm /dev/shm none rw,bind 0 0
1000 /run/shm /run/shm none rw,bind 0 0
1001 /run/user/1000 /run/user/1000 none rw,bind 0 0
1002 /run/user/1001 /run/user/1001 none rw,bind 0 0
1003 /run/user/0 /run/user/0 none rw,bind 0 0
1011 repo=http://archive.ubuntu.com/ubuntu/
1014 repo=http://deb.debian.org/debian/
1019 if schroot -l | grep -xFq chroot:$n; then
1020 echo "$0: $n schroot already installed, skipping"
1025 s dd of=/etc/schroot/chroot.d/$n.conf <<EOF
1031 preserve-environment=true
1034 if [[ -e $d/bin ]]; then
1035 s chroot $d apt-get update
1036 s chroot $d apt-get -y dist-upgrade --purge --auto-remove
1037 cd; s schroot -c $n -- apt-get install --allow-unauthenticated -y ${apps[@]}
1041 s debootstrap $n $d $repo
1042 cd; s schroot -c $n -- apt-get install --allow-unauthenticated -y ${apps[@]}
1044 s cp -P {,$d}/etc/localtime
1046 s dd of=/etc/systemd/system/schrootupdate.service <<'EOF'
1048 Description=schrootupdate
1049 After=multi-user.target
1053 ExecStart=/a/bin/log-quiet/sysd-mail-once schrootupdate /a/bin/distro-setup/schrootupdate
1055 s dd of=/etc/systemd/system/schrootupdate.timer <<'EOF'
1057 Description=schrootupdate
1060 OnCalendar=*-*-* 04:20:00
1063 WantedBy=timers.target
1065 s systemctl daemon-reload
1066 sgo schrootupdate.timer
1074 mkschroot debian stretch firefox-esr pulseaudio chromium
1078 s mkdir -p /nocow/user
1079 s chown $USER:$USER /nocow/user
1088 # adapted from /var/lib/dpkg/info/transmission-daemon.postinst
1089 # 450 seems likely to be unused. we need to specify one or else
1090 # it won't be stable across installs.
1091 if ! getent passwd debian-transmission > /dev/null; then
1094 s groupadd -g 450 debian-transmission
1100 --home-dir /var/lib/transmission-daemon \
1101 --shell /bin/false \
1111 --disabled-password \
1112 --home /var/lib/transmission-daemon \
1117 # We want group writable stuff from transmission.
1118 # However, after setting this, I learn that transmission sets it's
1119 # own umask based on it's settings file. Well, no harm leaving this
1120 # so it's set right from the beginning.
1121 s chfn debian-transmission -o umask=0002
1124 debian|trisquel|ubuntu)
1125 # note i had to do this, which is persistent:
1127 # s chgrp debian-transmission torrents partial-torrents
1129 # syslog says things like
1130 # 'Failed to set receive buffer: requested 4194304, got 425984'
1131 # google suggets giving it even more than that
1132 tu /etc/sysctl.conf<<'EOF'
1133 net.core.rmem_max = 67108864
1134 net.core.wmem_max = 16777216
1138 # some reason it doesn\'t seem to start automatically anyways
1139 pi-nostart transmission-daemon
1140 # be extra sure its not started
1141 ser disable transmission-daemon
1142 ser stop transmission-daemon
1144 # the folder was moved here after an install around 02/2017.
1145 # it contains runtime data,
1146 # plus a simple symlink to the config file which it\'s
1147 # not worth separating out.
1148 # between comps, the uid can change
1149 f=/i/transmission-daemon
1150 s lnf -T $f /var/lib/transmission-daemon/.config/transmission-daemon
1151 if [[ -e $f ]]; then
1152 s chown -R debian-transmission:debian-transmission $f
1154 for f in /i/k/partial-torrents /i/k/torrents; do
1155 if [[ -e $f ]]; then
1156 s chown -R debian-transmission:traci $f
1159 s chown -R debian-transmission:debian-transmission /var/lib/transmission-daemon
1161 # config file documented here, and it\'s the same config
1162 # for daemon vs client, so it\'s documented in the gui.
1163 # https://trac.transmissionbt.com/wiki/EditConfigFiles#Options
1165 # I originaly setup rpc-whitelist, but after using
1166 # routing to a network namespace, it doesn\'t see the
1167 # real source address, so it\'s disabled.
1169 # Changed the cache-size to 256 mb, reduces disk use.
1170 # It is a read & write cache.
1174 p = '/etc/transmission-daemon/settings.json'
1175 File.write(p, JSON.pretty_generate(JSON.parse(File.read(p)).merge({
1176 'rpc-whitelist-enabled' => false,
1177 'rpc-authentication-required' => false,
1178 'incomplete-dir' => '/i/k/partial-torrents',
1179 'incomplete-dir-enabled' => true,
1180 'download-dir' => '/i/k/torrents',
1181 "speed-limit-up" => 800,
1182 "speed-limit-up-enabled" => true,
1183 "peer-port" => 61486,
1184 "cache-size-mb" => 256,
1185 "ratio-limit" => 5.0,
1186 "ratio-limit-enabled" => true,
1191 # todo: others unknown
1196 # trisquel 8 = openvpn, debian stretch = openvpn-client
1197 vpn_ser=openvpn-client
1198 if [[ ! -e /lib/systemd/system/openvpn-client@.service ]]; then
1202 s dd of=/etc/systemd/system/transmission-daemon-nn.service <<EOF
1204 Description=Transmission BitTorrent Daemon netns
1205 After=network.target
1206 Requires=${vpn_ser}-nn@client.service
1207 After=${vpn_ser}-nn@client.service
1208 JoinsNamespaceOf=${vpn_ser}-nn@client.service
1211 #User=debian-transmission
1212 # notify type doesn't work with sudo
1214 ExecStart=/usr/bin/nsenter --mount=/root/mount_namespaces/client sudo -u debian-transmission /usr/bin/transmission-daemon -f --log-error
1215 ExecReload=/bin/kill -s HUP \$MAINPID
1220 WantedBy=multi-user.target
1224 if [[ $HOSTNAME == frodo ]]; then
1225 sgo transmission-daemon-nn
1229 ######### begin transmission client setup ######
1231 if [[ -e /p/transmission-rpc-pass ]]; then
1232 # arch had a default config,
1233 # debian had nothing until you start it.
1234 # With a little trial an error, here is a minimal config
1235 # taken from the generated one, plus changes that the
1236 # settings ui does, without a bunch of ui crap settings.
1238 # only settings I set were
1243 # the password is randomly generated on first run, i copied it out
1244 # so it could be used by other hosts.
1247 p = '/etc/transmission-daemon/settings.json'
1248 s = JSON.parse(File.read(p))
1249 s["rpc-password"] = File.read("/p/transmission-rpc-pass").chomp
1250 # default is 0022 (18 in decimal)
1252 File.write p, JSON.pretty_generate(s)
1255 rpc_pass=$(</p/transmission-rpc-pass)
1256 for f in /home/*; do
1257 d=$f/.config/transmission-remote-gtk
1260 s -u $u dd of=$d/config.json <<EOF
1264 "profile-name" : "Default",
1265 "hostname" : "transmission.b8.nz",
1266 "rpc-url-path" : "/transmission/rpc",
1268 "password" : "$rpc_pass",
1269 "auto-connect" : true,
1273 "update-active-only" : false,
1274 "activeonly-fullsync-enabled" : false,
1275 "activeonly-fullsync-every" : 2,
1276 "update-interval" : 3,
1277 "min-update-interval" : 3,
1278 "session-update-interval" : 60,
1286 "add-options-dialog" : false
1291 ######### end transmission client setup ######
1293 # dunno why it\'s there, but get rid of it
1295 li|lj) s rm -rf /home/linode ;;
1302 pi cups ghostscript gsfonts # from arch wiki cups page
1303 pi hplip # from google
1304 s gpasswd -a $USER sys # from arch wiki
1305 sgo org.cups.cupsd.service
1307 debian|trisquel|ubuntu)
1309 s gpasswd -a $USER lpadmin # based on ubuntu wiki
1312 # other distros unknown
1314 # goto http://127.0.0.1:631
1315 # administration tab, add new printer button.
1316 # In debian, I could use hte recommended driver,
1317 # in arch, I had to pick out the 6L driver.
1320 # allow user to run vms, from debian handbook
1321 for x in iank traci; do s usermod -a -G libvirt,kvm $x; done
1322 # bridge networking as user fails. google lead here, but it doesn\'t work:
1323 # oh well, I give up.
1324 # http://wiki.qemu.org/Features-Done/HelperNetworking
1326 # f=/etc/qemu/bridge.conf
1327 # s dd of=$f <<'EOF'
1330 # #s chown root:qemu $f # debian has somethig like qemu-libvirt. equivalent?
1333 # general known for debian/ubuntu, not for fedora
1336 debian|trisquel|ubuntu)
1337 if ! type -p go &>/dev/null; then
1339 # just the latest stable at the time of writing
1340 # TODO, maybe put this all into a build script,
1341 # and do some automatic updates
1342 wget https://dl.google.com/go/go1.12.4.linux-amd64.tar.gz
1343 s tar -C /usr/local -xzf go1.12.4.linux-amd64.tar.gz
1346 go get -u mvdan.cc/fdroidcl
1347 # a bit of googling, and added settings to bashrc
1353 # otherwise we get error about accessing kvm module.
1354 # seems like there might be a better way, but google was a bit vague.
1355 s $sed -ri '/^ *user *=/d' /etc/libvirt/qemu.conf
1356 echo 'user = "root"' | s tee -a /etc/libvirt/qemu.conf
1357 # https://bbs.archlinux.org/viewtopic.php?id=206206
1358 # # this should prolly go in the wiki
1360 # guessing this is not needed
1361 #sgo virtlogd.service
1370 wget ftp://ftp.gnu.org/pub/gnu/global/global-6.5.7.tar.gz
1373 # based on https://github.com/leoliu/ggtags
1374 ./configure --with-exuberant-ctags=/usr/bin/ctags
1377 pip install pygments
1385 debian|trisquel|ubuntu)
1393 # note this failed running at the beginning of this file,
1394 # because no systemd user instance was running.
1395 # Doing systemd --user resulted in
1396 # Trying to run as user instance, but $XDG_RUNTIME_DIR is not set
1398 if isdebian-testing; then
1399 # as of 7/2016, has no unstable deps, and is not in testing anymore.
1406 # # ubuntu unknown. probably the same as debian, just check if the
1407 # # init scripts come with the package.
1409 # # copied from arch, but moved to etc
1410 # s dd of=/etc/systemd/user/synergys.service <<'EOF'
1412 # Description=Synergy Server Daemon
1413 # After=network.target
1417 # ExecStart=/usr/bin/synergys --no-daemon --config /etc/synergy.conf
1418 # Restart=on-failure
1421 # WantedBy=multi-user.target
1423 # s dd of=/etc/systemd/user/synergys.socket <<'EOF'
1425 # Conflicts=synergys@.service
1428 # ListenStream=24800
1432 # WantedBy=sockets.target
1434 # # had this fail with 'Failed to connect to bus: No such file or directory'
1435 # # then when I tried it manually, it worked fine...
1436 # if ! systemctl --user daemon-reload; then
1438 # echo retrying systemd user daemon reload
1439 # systemctl --user daemon-reload
1443 # # taken from arch wiki.
1444 # s dd of=/etc/systemd/system/synergyc@.service <<'EOF'
1446 # Description=Synergy Client
1447 # After=network.target
1451 # ExecStart=/usr/bin/synergyc --no-daemon frodo
1452 # Restart=on-failure
1453 # # per man systemd.unit, StartLimitInterval, by default we
1454 # # restart more than 5 times in 10 seconds.
1455 # # And this param defaults too 200 miliseconds.
1459 # WantedBy=multi-user.target
1461 # s systemctl daemon-reload
1464 # ser enable synergyc@iank
1465 # ser start synergyc@iank ||: # X might not be running yet
1468 # systemctl --user start synergys ||:
1469 # systemctl --user enable synergys
1476 pi --no-install-recommends kdeconnect-plasma
1477 ### kdeconnect for gnome. started in /a/bin/distro-setup/desktop-20-autostart.sh
1478 ### but gnome + xmonad not working in flidas, so i disabled it
1479 pi libgtk-3-dev python3-requests-oauthlib valac cmake python-nautilus libappindicator3-dev
1480 cd /a/opt/indicator-kdeconnect
1483 cmake .. -DCMAKE_INSTALL_PREFIX=/usr
1486 # we can start it manually with /usr/lib/x86_64-linux-gnu/libexec/kdeconnectd
1487 # it seems, according to
1488 # /etc/xdg/autostart/kdeconnectd.desktop
1489 # I'm not seeing the icon, but the clipboard replication is working
1492 ### model 01 arduino support ###
1493 # https://github.com/keyboardio/Kaleidoscope/wiki/Install-Arduino-support-on-Linux
1494 # also built latest arduino in /a/opt/Arduino, (just cd build; ant build; ant run )
1495 # set arduino var in bashrc,
1496 # have system config file setup too.
1497 sudo adduser $USER dialout
1500 sudo usermod -a -G uucp $USER
1504 # this is for the mail command too. update-alternatives is kind of misleading
1505 # since at least it's main commands pretend mail does not exist.
1506 # bsd's mail got pulled in on some dumb dependency, i dunno how.
1507 s update-alternatives --set mailx /usr/bin/mail.mailutils
1509 ######### end misc packages #########
1512 # packages I once used before and liked, but don\'t want installed now for
1514 # python-sqlite is used for offlineimap
1515 # lxappearance python-sqlite dolphin paman dconf-editor
1521 # todo, finish configuring smart.
1524 # mostly from https://wiki.archlinux.org/index.php/S.M.A.R.T.
1525 # turn on smart. background on options:
1526 # first line, -a = test everyting on all devices.
1527 # -S on, turn on disk internal saving of vendor specific info,
1528 # from google, seems like this is usually already on and fairly standard.
1529 # -o on, turn on 4 hour period non-performance degrading testing.
1530 # short test daily 2-3am, extended tests Saturdays between 3-4am:
1531 sched="-s (S/../.././02|L/../../6/03)"
1532 s sed -i --follow-symlinks "s#^[[:space:]]*DEVICESCAN.*#\
1533 DEVICESCAN -a -o on -S on -n standby,q $sched \
1534 -m ian@iankelling.org -M exec /usr/local/bin/smart-notify#" /etc/smartd.conf
1536 # in the default configuration of at least ubuntu 14.04, resolvconf is
1537 # configured to order any nameservers associated with tun* or tap*
1538 # before the normal internet interfaces, which means they are always
1539 # consulted first. This is often slower and undesirable, ie. local dns
1540 # queries go from 0ms to 10+ or 100+ ms. To reverse the ordering, you
1542 #sudo sed -i --follow-symlinks '/tun\*\|tap\*/d' /etc/resolvconf/interface-order
1543 # however, this breaks dns lookup for hosts on the openvpn lan.
1544 # I can\'t figure out why hosts on the normal lan would not be
1545 # broken under the default ordering, except the host I was
1546 # testing with previously had an entry in /etc/hosts.
1548 ############# end unfinished
1550 ########### misc stuff
1552 # make networkmanager use resolvconf instead of its own dnsmasq which
1553 # conflicts with the normal dnsmasq package.
1554 f=/etc/NetworkManager/NetworkManager.conf
1556 s sed -ri '/ *\[main\]/,/^ *\[[^]]+\]/{/^\s*dns[[:space:]=]/d}' $f
1557 if [[ $m != $(md5sum $f) ]]; then
1558 srestart NetworkManager
1561 # make my /etc/fonts/conf.d/ get used.
1562 # I have a new sans-serif font there because the default one
1563 # displays l and I as the same char, grrrrr.
1566 /a/bin/distro-setup/mymimes
1569 # stop autopoping windows when i plug in an android phone.
1570 # dbus-launch makes this work within an ssh connection, otherwise you get this message,
1571 # with still 0 exit code.
1572 # dconf-WARNING **: failed to commit changes to dconf: Cannot autolaunch D-Bus without X11 $DISPLAY
1573 dbus-launch gsettings set org.gnome.desktop.media-handling automount-open false
1576 # on grub upgrade, we get prompts unless we do this
1578 for dev in $(s btrfs fi show /boot | sed -nr 's#.*path\s+(\S+)$#\1#p'); do
1579 devs+=($(devbyid $dev),)
1581 devs[-1]=${devs[-1]%,} # jonied by commas
1582 s debconf-set-selections <<EOF
1583 grub-pc grub-pc/install_devices multiselect ${devs[*]}
1587 sgo btrfsmaint.timer
1588 sgo btrfsmaintstop.timer
1591 # the wiki backup script from ofswiki.org uses generic paths
1592 s lnf /p/c/machine_specific/li/mw_vars /root
1593 s lnf /k/backup/wiki_backup /root
1595 s cedit /etc/goaccess.conf <<'EOF' || [[ $? == 1 ]]
1596 # all things found from looking around the default config
1597 # copied existing NCSA Combined Log Format with Virtual Host, plus %L
1598 log-format %^:%^ %h %^[%d:%t %^] "%r" %s %b "%R" "%u" %D
1599 time-format %H:%M:%S
1600 date-format %d/%b/%Y
1601 log-file /var/log/apache2/access.log
1604 # tip: copy access.log files to a stretch host directory, then run
1605 # jessie's goaccess is too old for some options, and it\'s
1606 # not easily installed from a testing.
1607 # goaccess --ignore-crawlers -f <(cat *) -a -o html > x.html
1612 trisquel|ubuntu|debian)
1613 # unison-gtk second, i want it to be default, not sure if that works
1614 # with spa. note, I used to install from testing repo when using stable,
1615 # but it shouldn't be needed since I wrote a script to handle mismatching
1617 spa unison unison-gtk
1626 # default is alsa, doesn\'t work with with pianobar
1627 s dd of=/etc/libao.conf <<'EOF'
1628 default_driver=pulse
1633 # note, for jessie, it depends on a higher version of btrfs-tools.
1635 # # disabled due to my patch being in btrbk
1637 # arch|debian|trisquel|ubuntu) pi btrbk ;;
1643 # ian: temporarily disabled while hosts are in flux.
1644 # if [[ $HOSTNAME == tp ]]; then
1645 # # backup/sync manually on others hosts for now.
1647 # # note: to see when it was last run,
1653 In mate settings settings, change scrolling to two-finger,
1654 because the default edge scroll doesn\'t work. Originally found this in debian.
1659 # remove dep that came in with desktop
1666 debian|trisquel|ubuntu) s gpasswd -a iank adm ;; #needed for reading logs
1669 /a/bin/buildscripts/pithosfly
1674 # https://www.torproject.org/docs/rpms.html.en
1675 # https://www.torproject.org/docs/debian.html.en
1676 # todo: figure out if the running service needs to be restarted upon updates
1677 # todo on fedora: setup non-dev packages
1679 s dd of=/etc/yum.repos.d/torproject.repo <<'EOF'
1681 name=Tor experimental repo
1683 baseurl=http://deb.torproject.org/torproject.org/rpm/tor-testing/fc/20/$basearch/
1685 gpgkey=http://deb.torproject.org/torproject.org/rpm/RPM-GPG-KEY-torproject.org.asc
1688 name=Tor experimental source repo
1691 baseurl=http://deb.torproject.org/torproject.org/rpm/tor-testing/fc/20/SRPMS
1693 gpgkey=http://deb.torproject.org/torproject.org/rpm/RPM-GPG-KEY-torproject.org.asc
1696 # to be secure, take a look at the fingerprint reported from the following install, and see if it matches from the link above:
1697 # 3B9E EEB9 7B1E 827B CF0A 0D96 8AF5 653C 5AC0 01F1
1699 /a/bin/buildscripts/tor-browser
1702 tu /etc/apt/sources.list "deb http://deb.torproject.org/torproject.org $(debian-codename) main"
1703 gpg --keyserver keys.gnupg.net --recv 886DDD89
1704 gpg --export A3C4F0F979CAA22CDBA8F512EE8CBC9E886DDD89 | sudo apt-key add -
1706 pi deb.torproject.org-keyring
1708 /a/bin/buildscripts/tor-browser
1712 /a/bin/buildscripts/tor-browser
1715 pi tor tor-browser-en
1725 fedora todo: disable the firewall or find a way to automate it.
1726 there's an unused section in t.org for tramikssion firewall setup
1728 fedora manual config for nfs:
1730 change to permanent configuration
1731 check the box for nfs
1732 was hard to figure this out, not sure if this is all needed, but
1734 mountd: udp/tcp 20048
1735 portmapper, in firewall-config its called rpc-bind: udp/tcp 111
1736 troubleshooting, unblock things in rpcinfo -p
1737 make sure to reload the firewall to load the persistent configuration
1744 debian|trisquel|ubuntu)
1748 pi nfs-utils || pending_reboot=true
1750 # this failed until I rebooted
1755 # networkmanager has this nasty behavior on flidas: if the machine
1756 # crashes with dnsmasq running, on subsequent boot, it adds an entry to
1757 # resolvconf for 127.0.0.1 in some stupid attempt to restore
1759 # This can be manually fixed by stoping dnsmasq,
1760 # then based on whats in /run/dnsmasq/, i see we can run
1761 # s resolvconf -d NetworkManager
1762 # oh ya, and stoping NetworkManager leaves this crap behind without cleaning it up.
1763 ser stop NetworkManager
1764 ser disable NetworkManager
1767 if [[ $HOSTNAME == frodo ]]; then
1768 # nohide = export filesystems mounted deeper than the export point
1769 # fsid=0 makes this export the "root" export
1770 # not documented in the man page, but this means
1771 # 1. it can be mounted with a shorthand of server:/
1772 # 2. exports that are subdirectories of this one will automatically be mounted
1773 tu /etc/exports <<'EOF'
1774 /k 10.0.0.0/24(rw,fsid=0,nohide,no_root_squash,async,no_subtree_check,insecure)
1784 # if I was going to create a persistent vm, i might do it like this:
1785 # variant=something # from: virt-install --os-variant list
1786 # s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
1787 # --disk=/a/images/some_name.qcow2,bus=virtio --vcpus 2 -r 4096 -w bridge=br0 \
1788 # -n some_name --import --os-variant $variant --cpu host-model-only
1792 ######### begin stuff belonging at the end ##########
1795 if $pending_reboot; then
1796 echo "$0: pending reboot and then finished. doing it now."
1799 echo "$0: $(date): ending now)"