X-Git-Url: https://iankelling.org/git/?p=distro-setup;a=blobdiff_plain;f=conflink;h=e26be58e0693af8d3ce3ddb9e84bdba8a8e1f636;hp=c385ca04e8e7c9738edaa7be5b480bb25ddef05d;hb=8a6b446c7e336596af614c853e1c6177e55a7983;hpb=935ac5b0c6bb279d461bac08866f2b70a8e648dc

diff --git a/conflink b/conflink
index c385ca0..e26be58 100755
--- a/conflink
+++ b/conflink
@@ -1,76 +1,119 @@
-#!/bin/bash -l
+#!/bin/bash
 
-set -eE -o pipefail
-trap 'echo "$0:$LINENO:error: \"$BASH_COMMAND\" returned $?"' ERR
+source /a/bin/errhandle/err
 
-
-sysv() {
-    echo "$@"
-    "$@"
+m() {
+  echo "$*"
+  "$@"
 }
-
-
-#
+s() { sudo "$@"; }
+lnf() { /a/exe/lnf "$@"; }
 
 
 shopt -s nullglob
 shopt -s extglob # note, already set with bash -l
 
-# if we make a link back to the root, traversing the subdirs stops.
-# This makes it so we can do subdir directories. Must call with absolute
-# paths.
+# If we make a link back to the root, we stop going deeper into subdir_files.
+# This makes it so we can do subdir directories.
+#
+# Also note, under filesystem/, symlinks are expanded.
 
 subdir-link-r() {
-    local root="$1"
-    local targets=()
-    if [[ $2 ]]; then
-        targets=( "$2"/!(.git|..|.) )
-    else
-        for f in "$1"/!(.git|..|.); do
-            [[ -d $f ]] && targets+=("$f") ||:
-        done
-    fi
-    local below="$( readlink -f "$root/..")"
-    for path in "${targets[@]}"; do
-        local fullpath="$(readlink -f "$path")"
-        #e $fullpath $below # debug
-        if [[ -f $path || $(dirname $(readlink -f "$fullpath")) == "$below" ]]; then
-            sysv lnf -T "$path" "$HOME/${path#$root/}"
-        elif [[ -d "$path" ]]; then
-            subdir-link-r "$root" "$path"
-        fi
+  local root="$1"
+  local targets=()
+  if [[ $2 ]]; then
+    targets=( "$2"/!(.git|..|.) )
+  else
+    for f in "$1"/!(.git|..|.); do
+      [[ -d $f ]] && targets+=("$f") ||:
     done
+  fi
+  local below="$( readlink -f "$root/..")"
+  for path in "${targets[@]}"; do
+    local fullpath="$(readlink -f "$path")"
+    #e $fullpath $below # debug
+    if [[ -f $path || $(dirname $(readlink -f "$fullpath")) == "$below" ]]; then
+      m lnf -T "$path" "$HOME/${path#$root/}"
+    elif [[ -d "$path" ]]; then
+      subdir-link-r "$root" "$path"
+    fi
+  done
 }
 
+
+
 common-file-setup() {
-    local dir fs_files x
-    for dir in "$@"; do
-        fs_files=( $dir/filesystem/* )
-        if [[ -e ${fs_files[0]} && $USER == ian ]]; then
-            # note, symlinks get resolved, not copied.
-            sysv s cp -RL ${fs_files[@]} /
-        fi
-        if [[ -e $dir/subdir_files ]]; then
-            subdir-link-r $dir/subdir_files
-        fi
-        local x=( $dir/!(subdir_files|filesystem|machine_specific) )
-        (( ${#x[@]} >= 1 )) || continue
-        sysv lnf ${x[@]} ~
-    done
+  local dir fs x bdir f dst
+  for dir in "$@"; do
+    fs=$dir/filesystem
+    if [[ -e $fs && $USER =~ ^iank?$ ]]; then
+      # note, symlinks get resolved, not copied.
+      s tar --mode=g-s --owner=0 --group=0 -cz -C $fs . | s tar -xz -C /
+    fi
+
+    if [[ -e $dir/subdir_files ]]; then
+      m subdir-link-r $dir/subdir_files
+    fi
+    local x=( $dir/!(binds|subdir_files|filesystem|machine_specific|..|.) )
+    (( ${#x[@]} >= 1 )) || continue
+    m lnf ${x[@]} ~
+  done
 }
 
 all_dirs=({/a/c,/p/c}{,/machine_specific/$HOSTNAME})
+# note, we assume a group of hosts does not have the
+# same name as a single host, which is no problem on our scale.
+for x in /p/c/machine_specific/*.hosts /a/bin/ds/machine_specific/*.hosts; do
+  if grep -qxF $HOSTNAME $x; then all_dirs+=( ${x%.hosts} ); fi
+done
+
 c_dirs=(/a/c{,/machine_specific/$HOSTNAME})
 case $USER in
-    ian)
-        # p needs to go first so .ssh link is created, then config link inside it
-        common-file-setup ${all_dirs[@]}
-        sudo -u traci "$BASH_SOURCE"
-        ;;
-    traci)
-        common-file-setup ${c_dirs[@]}
-        ;;
-    *)
-        echo "$0: error: unexpected user"; exit 1
-        ;;
+  iank)
+    files=(/p/c/machine_specific/*/filesystem/etc/ssh/*_key)
+    if [[ -e $files ]]; then
+      chmod 600 ${files[@]}
+    fi
+    # p needs to go first so .ssh link is created, then config link inside it
+    m common-file-setup ${all_dirs[@]}
+
+    #### begin special extra stuff ####
+    install -d -m700 ~/gpg-agent-socket
+
+    f=/var/lib/bind
+    if [[ -e $f ]]; then
+      # reset to the original permissions.
+      m s chgrp -R bind $f
+      m s chmod g+w $f
+    fi
+    sudo bash -c 'shopt -s nullglob; for f in /etc/bind/*.key /etc/bind/*.private /etc/bind/key.*; do chgrp bind $f; done'
+    if [[ -e /etc/davpass ]] && getent group www-data &>/dev/null; then
+      s chgrp www-data /etc/davpass
+    fi
+    if [[ -e /var/lib/znc ]] && getent group znc; then
+      s chown -R znc:znc /var/lib/znc
+    fi
+    /a/exe/lnf -T /p/arbtt-capture.log ~/.arbtt/capture.log
+    f=/etc/prometheus-htpasswd
+    if [[ -e $f ]]; then
+      s chmod 640 $f /etc/prometheus-pass
+      s chown root:www-data $f
+      if getent passwd prometheus; then
+        s chown root:prometheus /etc/prometheus-pass
+      fi
+    fi
+
+    ##### end special extra stuff #####
+
+    sudo bash -c 'shopt -s nullglob; cd /etc/openvpn; for f in client/* server/*; do ln -sf $f .; done'
+    sudo bash -c 'shopt -s nullglob; cd /etc/openvpn; for f in server/*.key client/*.key; do chmod 600 $f; done'
+
+    m sudo -H -u traci "$BASH_SOURCE"
+    ;;
+  traci)
+    m common-file-setup ${c_dirs[@]}
+    ;;
+  *)
+    echo "$0: error: unexpected user"; exit 1
+    ;;
 esac