#!/bin/bash
# Copyright (C) 2019 Ian Kelling
# SPDX-License-Identifier: AGPL-3.0-or-later

# shellcheck source=/a/bin/ds/.bashrc
export LC_USEBASHRC=t; if [[ -s ~/.bashrc ]]; then . ~/.bashrc; fi

### setup
source /a/bin/errhandle/err
src="$(readlink -f -- "${BASH_SOURCE[0]}")"; src=${src%/*} # directory of this file

if [[ $EUID == 0 ]]; then
  echo "$0: error: run as regular user" >&2
  exit 1
fi

err-cleanup() {
  echo 1 >~/.local/distro-end
}

# shellcheck source=./pkgs
source $src/pkgs

echo "$0: $(date) starting now)"
# see example of usage to understand.
end_msg() {
  local y
  IFS= read -r -d '' y  ||:
  end_msg_var+="$y"
}
end() {
  e "$end_msg_var"
  echo 0 >~/.local/distro-end
  if $pending_reboot; then
    echo "$0: pending reboot and then finished. doing it now."
    echo "exiting with status 0"
    sudo reboot now
  else
    echo "$0: $(date): ending now)"
    echo "exiting with status 0"
  fi
  exit 0
}
pre="${0##*/}:"
sudo() {
  printf "$pre %s\n"  "$*"
  SUDOD="$PWD" command sudo "$@";
}
m() { printf "$pre %s\n"  "$*"; "$@"; }
e() { printf "$pre %s\n"  "$*"; }
distro=$(distro-name)
codename=$(debian-codename)
codename_compat=$(debian-codename-compat)
pending_reboot=false
sed="sed --follow-symlinks"

# when we schroot, it will fail if we are in a directory that doesnt exist in the chroot
cd /

## template:
# case $distro in
# esac

case $HOSTNAME in
  li|bk|je) : ;;
  *)
    # get sudo pass cached right away
    if ! sudo -nv 2>/dev/null; then
      sudo -v
    fi
    ;;
esac

# old repo. remove when all machines updated
sudo rm -fv /etc/apt/sources.list.d/wireguard-ubuntu-wireguard-bionic.list
# remove old file
sudo rm -fv /etc/apt/preferences.d/minetest

#### initial packages
pup
if isdeb; then
  pi aptitude
fi

# avoid prompts
sudo debconf-set-selections <<EOF
popularity-contest popularity-contest/participate boolean true
EOF

########### begin section including vps ################
pi ${p2[@]}


conflink

sudo rm -fv

# no equivalent in other distros:
if isdeb && pcheck apt-file; then
  # this condition is just a speed optimization
  pi apt-file
  sudo apt-file update
fi


# disable motd junk.
case $distro in
  debian)
    # allows me to pipe with ssh -t, and gets rid of spam
    # http://forums.debian.net/viewtopic.php?f=5&t=85822
    # i'd rather disable the service than comment the init file
    # this says disabling the service, it will still get restarted
    # but this script doesn't do anything on restart, so it should be fine
    sudo truncate -s0 /var/run/motd.dynamic
    ;;
  trisquel|ubuntu)
    # this isn't a complete solution. It still shows me when updates are available,
    # but it's no big deal.
    sudo rm -fv /etc/update-motd.d/10-help-text /etc/update-motd.d/00-header
    ;;
esac






# dogcam setup. not using atm
# case $HOSTNAME in
#   lj|li)
#     /a/bin/webcam/install-server
#     ;;
#   kw)
#     /a/bin/webcam/install-client
#     ;;
# esac


## not actually using prometheus just yet
# # office is not exposed to internet yet
# if [[ $HOSTNAME != kw ]]; then
#   ## prometheus node exporter setup
#   web-conf -f 9100 -p 9101 apache2 $(hostname -f) <<'EOF'
# #https://httpd.apache.org/docs/2.4/mod/mod_authn_core.html#authtype
# # https://stackoverflow.com/questions/5011102/apache-reverse-proxy-with-basic-authentication
# <Location />
#    AllowOverride None
#    AuthType basic
#    AuthName "Authentication Required"
#    # setup one time, with root:www-data, 640
#    AuthUserFile "/etc/prometheus-htpasswd"
#    Require valid-user
# </Location>
# EOF
# fi


pi debootstrap
######### begin universal pinned packages ######
case $(debian-codename) in
  nabia|etiona|flidas)
    sudo rm -fv /etc/apt/preferences.d/etiona-buster
    sd /etc/apt/preferences.d/trisquel-debian <<EOF
Explanation: Debian* includes Debian + Debian Backports
Package: *
Pin: release o=Debian*
Pin-Priority: -100
EOF
    ;;&
  # needed for debootstrap scripts for fai since fai requires debian
  flidas)
    # moved to fai
    #curl http://archive.ubuntu.com/ubuntu/project/ubuntu-archive-keyring.gpg | s apt-key add -
    sd /etc/apt/preferences.d/flidas-xenial <<EOF
Package: *
Pin: release a=xenial
Pin-Priority: -100

Package: *
Pin: release a=xenial-updates
Pin-Priority: -100

Package: *
Pin: release a=xenial-security
Pin-Priority: -100

Package: firefox
Pin: release n=xenial
Pin-Priority: 500
EOF
    sd /etc/apt/sources.list.d/xenial.list 2>/dev/null <<EOF
deb http://us.archive.ubuntu.com/ubuntu/ xenial main
deb http://us.archive.ubuntu.com/ubuntu/ xenial-updates main
deb http://us.archive.ubuntu.com/ubuntu/ xenial-security main
EOF

    if ! apt-key list | grep /C0B21F32 &>/dev/null; then
      # moved to fai
      #sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 3B4FE6ACC0B21F32
      sd /etc/apt/preferences.d/flidas-bionic <<EOF
Package: *
Pin: release a=bionic
Pin-Priority: -100

Package: *
Pin: release a=bionic-updates
Pin-Priority: -100

Package: *
Pin: release a=bionic-security
Pin-Priority: -100
EOF
    fi

    # better to run btrfs-progs which matches our kernel version
    # (note, renamed from btrfs-tools)
    sd /etc/apt/preferences.d/btrfs-progs <<EOF
Package: btrfs-progs libzstd1
Pin: release a=bionic
Pin-Priority: 1005

Package: btrfs-progs libzstd1
Pin: release a=bionic-updates
Pin-Priority: 1005

Package: btrfs-progs libzstd1
Pin: release a=bionic-security
Pin-Priority: 1005
EOF


    t=$(mktemp)
    cat >$t <<EOF
deb http://us.archive.ubuntu.com/ubuntu/ bionic main
deb http://us.archive.ubuntu.com/ubuntu/ bionic-updates main
deb http://us.archive.ubuntu.com/ubuntu/ bionic-security main
EOF
    f=/etc/apt/sources.list.d/bionic.list
    if ! diff -q $t $f; then
      sudo cp $t $f
      sudo chmod 644 $f
      m p update
    fi

    # no special reason, but its better for btrfs-progs to
    # be closer to our kernel version
    pi btrfs-progs

    if [[ ! -e /usr/share/debootstrap/scripts/xenial ]]; then
      t=$(mktemp -d)
      cd $t
      m aptitude download debootstrap/xenial
      m ex ./*
      sudo cp ./usr/share/debootstrap/scripts/* /usr/share/debootstrap/scripts
    fi

    sd /etc/apt/preferences.d/flidas-etiona <<EOF
Package: *
Pin: release a=etiona
Pin-Priority: -100

Package: *
Pin: release a=etiona-updates
Pin-Priority: -100

Package: *
Pin: release a=etiona-security
Pin-Priority: -100

Package: *
Pin: release a=etiona-backports
Pin-Priority: -100
EOF

    t=$(mktemp)
    cat >$t <<EOF
deb http://mirror.fsf.org/trisquel/ etiona main
deb http://mirror.fsf.org/trisquel/ etiona-updates main
deb http://archive.trisquel.info/trisquel/ etiona-security main
deb http://mirror.fsf.org/trisquel/ etiona-backports main
EOF
    f=/etc/apt/sources.list.d/etiona.list
    if ! diff -q $t $f; then
      sudo cp $t $f
      n s chmod 644 $f
      m p update
    fi

    sd /etc/apt/preferences.d/debian-goodies <<EOF
Package: debian-goodies
Pin: release n=etiona
Pin-Priority: 1005
EOF


    # dont use buster because it causes dist-upgrade to think its downgrading
    # packages while really just reinstalling the same version.
    f=/etc/apt/apt.conf.d/01iank
    sudo rm -fv $f
    #         # stupid buster uses some key algorithm not supported by flidas gpg that apt uses.
    #         sd /etc/apt/apt.conf.d/01iank <<'EOF'
    # Acquire::AllowInsecureRepositories "true";
    # EOF

    f=/etc/apt/sources.list.d/buster.list
    sudo rm -fv $f

    # newer version needed for false positive in checkrestart.
    # I did buster at first, but other problem above with having
    # buster repos. not sure if the false positive exists in etiona.
    pi debian-goodies

    sd /etc/apt/preferences.d/shellcheck <<EOF
Package: shellcheck
Pin: release a=etiona
Pin-Priority: 1005

Package: shellcheck
Pin: release a=etiona-updates
Pin-Priority: 1005

Package: shellcheck
Pin: release a=etiona-security
Pin-Priority: 1005
EOF

    sd /etc/apt/preferences.d/bash <<EOF
Package: bash
Pin: release a=etiona
Pin-Priority: 1005

Package: bash
Pin: release a=etiona-updates
Pin-Priority: 1005

Package: bash
Pin: release a=etiona-security
Pin-Priority: 1005
EOF


    ;;&
  nabia|etiona)
    # for ziva
    #p install --no-install-recommends minetest/buster libleveldb1d/buster libncursesw6/buster libtinfo6/buster
    doupdate=false
    for n in buster bullseye; do
      f=/etc/apt/sources.list.d/$n.list
      t=$(mktemp)
      case $n in
        buster)
          cat >$t <<'EOF'
deb http://http.us.debian.org/debian buster main
deb-src http://http.us.debian.org/debian buster main

deb http://security.debian.org/ buster/updates main
deb-src http://security.debian.org/ buster/updates main

deb http://http.us.debian.org/debian buster-updates main
deb-src http://http.us.debian.org/debian buster-updates main

deb http://http.debian.net/debian buster-backports main
deb-src http://http.debian.net/debian buster-backports main
EOF
          ;;
        bullseye)
          cat >$t <<'EOF'
EOF
          cat >$t <<EOF
deb http://deb.debian.org/debian bullseye main
deb-src http://deb.debian.org/debian bullseye main

deb http://deb.debian.org/debian-security/ bullseye-security main
deb-src http://deb.debian.org/debian-security/ bullseye-security main

deb http://deb.debian.org/debian bullseye-updates main
deb-src http://deb.debian.org/debian bullseye-updates main

deb http://http.debian.net/debian bullseye-backports main
deb-src http://http.debian.net/debian bullseye-backports main
EOF
          ;;
      esac

      if ! diff -q $t $f; then
        doupdate=true
        s cp $t $f
        s chmod 644 $f
      fi
    done
    if $doupdate; then
      curl -s https://ftp-master.debian.org/keys/archive-key-10-security.asc | sudo apt-key add -
      curl -s https://ftp-master.debian.org/keys/archive-key-10.asc | sudo apt-key add -
      p update
    fi

    if [[ ! -e /usr/share/debootstrap/scripts/bullseye ]]; then
      t=$(mktemp -d)
      cd $t
      m aptitude download debootstrap/bullseye
      m ex ./*
      sudo cp ./usr/share/debootstrap/scripts/* /usr/share/debootstrap/scripts
    fi

    ;;&
  etiona)
    sd /etc/apt/preferences.d/focal <<'EOF'
Package: *
Pin: release n=focal,o=Ubuntu
Pin-Priority: -100
EOF

    sd /etc/apt/preferences.d/spamassassin <<'EOF'
Package: spamassassin sa-compile spamc
Pin: release n=focal,o=Ubuntu
Pin-Priority: 500
EOF
    sd /etc/apt/preferences.d/spamassassin <<'EOF'
Package: spamassassin sa-compile spamc
Pin: release n=focal,o=Ubuntu
Pin-Priority: 500
EOF
    sd /etc/apt/preferences.d/psd <<'EOF'
Package: profile-sync-daemon
Pin: release n=focal,o=Ubuntu
Pin-Priority: 500
EOF

    f=/etc/apt/sources.list.d/focal.list
    t=$(mktemp)
    cat >$t <<'EOF'
deb http://us.archive.ubuntu.com/ubuntu/ focal main universe
deb http://us.archive.ubuntu.com/ubuntu/ focal-updates main universe
deb http://us.archive.ubuntu.com/ubuntu/ focal-security main universe
EOF
    if ! diff -q $t $f; then
      sudo dd if=$t of=$f 2>/dev/null
      p update
    fi



    sd /etc/apt/preferences.d/nabia-etiona <<'EOF'
Package: *
Pin: release n=nabia*,o=Trisquel
Pin-Priority: -100
EOF

    f=/etc/apt/sources.list.d/nabia.list
    t=$(mktemp)
    cat >$t <<'EOF'
deb http://mirror.fsf.org/trisquel/ nabia main
deb-src http://mirror.fsf.org/trisquel/ nabia main

deb http://mirror.fsf.org/trisquel/ nabia-updates main
deb-src http://mirror.fsf.org/trisquel/ nabia-updates main

deb http://archive.trisquel.info/trisquel/ nabia-security main
deb-src http://archive.trisquel.info/trisquel/ nabia-security main

# Uncomment this lines to enable the backports optional repository
deb http://mirror.fsf.org/trisquel/ nabia-backports main
deb-src http://mirror.fsf.org/trisquel/ nabia-backports main
EOF
    if ! diff -q $t $f; then
      sudo dd if=$t of=$f 2>/dev/null
      p update
    fi

    # duplicated in fai. Pin for bionic + ubuntu so that ppas dont get
    # matched.
    sd /etc/apt/preferences.d/etiona-bionic <<'EOF'
Package: *
Pin: release n=bionic,o=Ubuntu
Pin-Priority: -100
Package: firefox
Pin: release n=bionic,o=Ubuntu
Pin-Priority: 500
EOF

    sd /etc/apt/preferences.d/etiona-sa <<'EOF'
Package: *
Pin: release n=bionic,o=Ubuntu
Pin-Priority: -100
EOF

    ;;&
  *)
    if isdeb; then
      pi debian-goodies shellcheck
    fi
    ;;
esac



case $codename_compat in
  focal)
    sd /etc/apt/preferences.d/nabia-btrfs-progs <<'EOF'
Package: btrfs-progs
Pin: release a=buster-backports
Pin-Priority: 500
EOF
    p install btrfs-progs
    ;;
esac


# 2020-03-03 old file
s rm -fv /etc/apt/preferences.d/radicale
######### end universal pinned packages ######


case $codename in
  etiona)
    sd /etc/apt/preferences.d/obs <<EOF
Package: libfdk-aac1
Pin: release n=bionic
Pin-Priority: 500
EOF
    sd /etc/apt/preferences.d/chromium <<EOF
Package: chromium-*
Pin: release n=bionic
Pin-Priority: 500
EOF

    ;;
esac



##### begin automatic upgrades (after checkrestart has been installed) ####
# if apt-config-auto-update is installed,
# it also has similar config, in a file 10something,
# but i think his overrides it since its higher number.
# This file was part of the automatic-updates package,
# and it has a configu option to not get new package lists,
# which seems pretty stupid to me, you cant actually upgrade
# anything if you dont have the new package list.
sd /etc/apt/apt.conf.d/20auto-upgrades <<'EOF'
APT::Periodic::Update-Package-Lists "1";
APT::Periodic::Download-Upgradeable-Packages "1";
APT::Periodic::AutocleanInterval "7";
APT::Periodic::Unattended-Upgrade "1";
EOF

# fyi: default file has comments about available options,
# you may want to read that, do pkx unattended-upgrades
# default is just security updates. this list found from reading
# match_whitelist_string() in $(which unattended-upgrades)
sd /etc/apt/apt.conf.d/50unattended-upgrades  <<EOF
Unattended-Upgrade::Mail "root";
Unattended-Upgrade::MailOnlyOnError "true";
Unattended-Upgrade::Remove-Unused-Dependencies "true";
Unattended-Upgrade::Origins-Pattern {
  "o=*,l=*,a=*,c=*,site=*,n=*";
};
EOF

# old files
sudo rm -f /etc/cron.d/unattended-upgrade-reboot /usr/local/bin/zelous-unattended-reboot /etc/cron.d/myupgrade

# myupgrade cron exists in /etc/cron.d/ian

##### end automatic upgrades ####


# commented in case i want to use this sometime later
#     sd /etc/apt/preferences.d/buster-backports <<EOF
# Package: *
# Pin: release a=buster-backports
# Pin-Priority: 500
# EOF

if [[ -e /etc/wireguard/wghole.conf ]]; then
  sgo wg-quick@wghole
fi

###### begin website setup
case $HOSTNAME in
  li|bk|je)
    pi bind9
    f=/var/lib/bind/db.b8.nz
    if [[ ! -e $f ]]; then
      dnsb8
    fi
    ;;&
  bk)
    sgo wg-quick@wgmail

    # i just dont feel like setting up a special purpose ssh key to do this automatically.
    end_msg <<'EOF'
# run this once for bk on local machine:
# only used for old openvpn setup
/a/exe/vpn-mk-client-cert -c bk.b8.nz -b expertpath -n mail li.iankelling.org
EOF
    end
    ;;
  je)
    end
    ;;
  li)

    m /a/h/setup.sh iankelling.org

    # start mumble only when im going to use it, since i dont use it much
    pi-nostart mumble-server
    sudo $sed -ri "s/^ *(serverpassword=).*/\1$(< /a/bin/bash_unpublished/mumble_pass)/" /etc/mumble-server.ini

    # do certificate to avoid warning about unsigned cert,
    # which is overkill for my use, but hey, I'm cool, I know
    # how to do this.
    m web-conf apache2 mumble.iankelling.org
    sudo rm -fv /etc/apache2/sites-enabled/mumble.iankelling.org

    # general vpn for as needed use
    vpn-server-setup -d -r -4 10.5.5 -p 443 -n hole

    # todo: consider if this should exist for the
    # other vpn server
    teeu /etc/openvpn/server/hole.conf <<'EOF'
client-to-client
EOF

    # sullivan d8
    sd /etc/openvpn/client-config-hole/sd8 <<'EOF'
ifconfig-push 10.5.5.41 255.255.255.0
EOF
    # hsieh d8
    sd /etc/openvpn/client-config-hole/hd8 <<'EOF'
ifconfig-push 10.5.5.42 255.255.255.0
EOF

    sd /etc/openvpn/client-config-hole/onep9 <<'EOF'
ifconfig-push 10.5.5.14 255.255.255.0
EOF
    sd /etc/openvpn/client-config-hole/bo <<'EOF'
ifconfig-push 10.5.5.13 255.255.255.0
EOF
    sd /etc/openvpn/client-config-hole/sy <<'EOF'
ifconfig-push 10.5.5.12 255.255.255.0
EOF
    sd /etc/openvpn/client-config-hole/kw <<'EOF'
ifconfig-push 10.5.5.9 255.255.255.0
EOF
    sd /etc/openvpn/client-config-hole/x3 <<'EOF'
ifconfig-push 10.5.5.8 255.255.255.0
EOF
    sd /etc/openvpn/client-config-hole/x2 <<'EOF'
ifconfig-push 10.5.5.7 255.255.255.0
EOF
    sd /etc/openvpn/client-config-hole/wclient <<'EOF'
ifconfig-push 10.5.5.6 255.255.255.0
EOF
    sd /etc/openvpn/client-config-hole/frodo <<'EOF'
ifconfig-push 10.5.5.5 255.255.255.0
EOF
    sd /etc/openvpn/client-config-hole/amy <<'EOF'
ifconfig-push 10.5.5.3 255.255.255.0
EOF
    sd /etc/openvpn/client-config-hole/kd <<'EOF'
ifconfig-push 10.5.5.2 255.255.255.0
EOF

    # for adding to current system:
    #vpn-mk-client-cert -s "" -n hole 72.14.176.105
    # adding to remove system 107,
    #vpn-mk-client-cert -s "" -n hole -c 10.2.0.107 -b hd8 iankelling.org
    #
    # for wireguard hole vpn
    # wghole

    # requested from linode via a support ticket.
    # https://www.linode.com/docs/networking/an-overview-of-ipv6-on-linode/
    # ipv6 stuff pieced together
    # via slightly wrong information from
    # https://github.com/angristan/openvpn-install/blob/master/openvpn-install.sh
    # https://community.openvpn.net/openvpn/wiki/IPv6
    # and man openvpn.
    #
    # This uses a public /64, but afaik, that is not needed for my
    # current use case, since I'm doing ipv6 nat, they could be private
    # and nat to a public address. I'm doing ipv6 nat in order to have 2
    # vpn clients that externally share the same ip when sending so they
    # share ip reputation.  Note, the eth0 and tunx needed to be
    # different subnets. On the same, I saw some neighbor packet go
    # unanswered, tcpdump showed packets getting lost. I tried splitting the
    # /64, it didn't work but I didn't investigate closely.


    # not starting as i intend to replace it
    m vpn-server-setup -s -i tunmail -n mail -d -6 2600:3c00:e002:3800::/64 2600:3c00:e002:3800::1/64
    sudo tee /etc/openvpn/client-config-mail/mailclient <<'EOF'
ifconfig-push 10.8.0.4 255.255.255.0
ifconfig-ipv6-push 2600:3c00:e002:3800::4/64
EOF
    sudo tee /etc/openvpn/client-config-mail/expertpath <<'EOF'
ifconfig-push 10.8.0.5 255.255.255.0
ifconfig-ipv6-push 2600:3c00:e002:3800::5/64
EOF


    sudo dd of=/etc/systemd/system/vpn-mail-forward.service <<'EOF'
[Unit]
Description=Turns on iptables mail nat
BindsTo=openvpn-server@mail.service

[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/a/bin/distro-setup/vpn-mail-forward tunmail start
ExecStop=/a/bin/distro-setup/vpn-mail-forward tunmail stop

[Install]
RequiredBy=openvpn-server@mail.service
EOF
    ser daemon-reload


    # needed for li's local mail delivery.
    tu /etc/hosts <<<"10.8.0.4 mx.iankelling.org"

    # wgmail handles this.
    #sgo vpn-mail-forward.service
    # old:
    #sgo openvpn-server@mail
    sgo wg-quick@wgmail

    # setup let's encrypt cert
    m web-conf apache2 mail.iankelling.org
    # TODO, i expanded the above cert manually to mx.iankelling.org, this should be captured
    # in the automation here. We use mail.iankelling.org as our ehlo name when sending mail
    # but our mx record is mx.iankelling.org. Initially I was just using mail.iankelling.org,
    # but the problem is I want multiple ips to be able to identify as mail.iankelling.org,
    # but a subset to be mx.iankelling.org. Afaik, there is no problem with having
    # our mail cert be for mail.iankelling.org, and have people connect to mx.ian...,
    # but it doesn't make logical sense to do this.
    sudo rm -fv /etc/apache2/sites-enabled/mail.iankelling.org{,-redir}.conf
    ser reload apache2

    a2enmod -q proxy proxy_http
    domain=cal.iankelling.org
    web-conf -f 10.8.0.4:5232 - apache2 $domain <<'EOF'
# https://radicale.org/2.1.html
#https://httpd.apache.org/docs/2.4/mod/mod_authn_core.html#authtype
# https://stackoverflow.com/questions/5011102/apache-reverse-proxy-with-basic-authentication
<Location /radicale/>
  Options +FollowSymLinks +Multiviews +Indexes
  AllowOverride None
  AuthType basic
  AuthName "Authentication Required"
  # setup one time, with root:www-data, 640
  AuthUserFile "/etc/caldav-htpasswd"
  Require valid-user
  RequestHeader    set X-Script-Name /radicale/
  RequestHeader    set X-Remote-User expr=%{REMOTE_USER}
  ProxyPass  "http://10.8.0.4:5232/" retry=0
  ProxyPassReverse  "http://10.8.0.4:5232/"
</Location>
EOF
    # nginx version of above would be:
    # auth_basic "Not currently available";
    # auth_basic_user_file /etc/nginx/caldav/htpasswd;



    ###### begin znc setup #####
    pi znc

    # https://wiki.znc.in/FAQ seems to imply that znc doesn\'t need restart after cert change.
    # to get into the web interface,
    # then use non-main browser or else it doebsn't allow it based on ocsp stapling from my main site.
    # https://iankelling.org:12533/
    # login as ian, pass is in pass store, the part after :

    # znc config generated by doing
    # znc --makeconf
    # selected port is also used in erc config
    # comma separated channel list worked.
    # while figuring things out, running znc -D for debug in foreground.
    # to exit and save config:
    # /msg *status shutdown
    # configed auth on freenode by following
    # https://wiki.znc.in/Sasl:
    # /query *sasl
    # RequireAuth yes
    # Mechanism PLAIN
    # Set MyNickservName pa$$w0rd
    # created the system service after, and had to do
    # mv /home/iank/.znc/* /var/lib/znc
    # sed -i 's,/home/iank/.znc/,/var/lib/znc,' /var/lib/znc/config/znc.conf
    # and made a copy of the config files into /p/c
    # /msg *status LoadMod --type=global log -sanitize
    # todo: in config file AllowWeb = true should be false. better security if that is off unless we need it.
    # /msg *status LoadMod --type=network perform
    # /query *perform add PRIVMSG ChanServ :invite #fsf-office
    # /msg *perform add JOIN #fsf-office
    # /msg *status LoadMod NickServ
    #
    # i set  Buffer = 500
    # also ran /znc LoadMod clearbufferonmsg
    # it would be nice if erc supported erc query buffers by doing
    # /msg *status clearbuffer <name of the query/receiver
    # on killing the,
    # an example seems to be here:	https://github.com/zenspider/elisp/blob/master/rwd-irc.el
    # if that was the case i could remove the module clearbufferonmsg
    # also would be nice if erc supported
    # https://wiki.znc.in/self-message
    # https://wiki.znc.in/Query_buffers                                                \
      #
    if ! getent passwd znc > /dev/null; then
      sudo useradd --create-home -d /var/lib/znc --system --shell /sbin/nologin --comment "Account to run ZNC daemon" --user-group znc
    fi
    sudo chmod 700 /var/lib/znc
    sudo chown -R znc:znc /var/lib/znc
    # Avoid restarting if possible, reconnecting to irc is annoying.
    # The unit file was made active with conflink.
    # Note, avoid using ser here because we wrap sudo to prints the command first.
    if [[ $(systemctl is-active znc) != active ]]; then
      sgo znc
    fi
    ###### stop znc setup #####

    end
    ;;
esac
###### end website setup

########### end section including li/lj ###############


#### desktop stuff

### system76 things ###
case $HOSTNAME in
  sy|bo)
    # note, i stored the initial popos packages at /a/bin/data/popos-pkgs
    if [[ ! -e /etc/apt/sources.list.d/system76.list ]]; then
      # https://blog.zackad.dev/en/2017/08/17/add-ppa-simple-way.html
      sd /etc/apt/sources.list.d/system76.list <<EOF
deb http://ppa.launchpad.net/system76-dev/stable/ubuntu $codename_compat main
deb-src http://ppa.launchpad.net/system76-dev/stable/ubuntu $codename_compat main
EOF
      # ubuntu keyserver is prone to intermittent failures
      trysleep 4 15 s apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 5D1F3A80254F6AFBA254FED5ACD442D1C8B7748B
      p update
      # https://support.system76.com/articles/install-ubuntu/
      # but i'm hoping this is not needed
      #       sd /etc/apt/preferences.d/system76 <<'EOF'
      # Package: *
      # Pin: release o=LP-PPA-system76-dev-stable
      # Pin-Priority: 1001
      # EOF
      pi system76-driver system76-firmware
      # if you get a notice about a firmware update, the notifier on i3
      # is too dumb to do anything when you click it. so to see
      # a changelog, cd to
      # /var/cache/system76-firmware-daemon
      # extract the xz files there, one will contain a changelog.
      # then to install an update:
      # s system76-firmware-cli schedule
    fi
    ;;
esac

case $distro in
  trisquel|ubuntu)

    # ppa:obsproject/obs-studio
    if [[ ! -s /etc/apt/sources.list.d/obs.list ]]; then
      # https://blog.zackad.dev/en/2017/08/17/add-ppa-simple-way.html
      sd /etc/apt/sources.list.d/obs.list <<EOF
deb http://ppa.launchpad.net/obsproject/obs-studio/ubuntu $codename_compat main
deb-src http://ppa.launchpad.net/obsproject/obs-studio/ubuntu $codename_compat main
EOF
      trysleep 4 15 s apt-key adv --keyserver keyserver.ubuntu.com --recv-keys BC7345F522079769F5BBE987EFC71127F425E228
      p update
    fi
    ;;
esac

case $codename_compat in
  xenial)
    # mate-indicator-applet and beyond are msc things I noticed diffing a
    # standard install with mine.
    pi xorg lightdm mate-desktop-environment mate-desktop-environment-extras mate-indicator-applet anacron
    ;;
  stretch)
    pi task-mate-desktop
    ;;
  buster)
    # todo: figure out mate for buster
    # pi task-gnome-desktop
    ;;
  bionic|focal)
    # i had installing mate-indicator-applet, but im not sure why so i removed
    pi xorg lightdm mate-desktop-environment mate-desktop-environment-extras anacron

    # pi gnome-core
    # # apt-get update periodically fails with an appstream error.
    # # this removes gnome-core, but its just a package for dependencies
    # p -y remove appstream


    # by default, it sleeps when not logged in to x/wayland and on ac power.
    # stop that.
    if id -u gdm &>/dev/null; then
      sudo -u gdm dbus-launch gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type 'nothing'
    fi
    ;;&
  focal)
    # lightdm startup fails without this. on etiona, we got unity-greeter installed automatically,
    # it would probably work on nabia too, but google just lead me to this and it works fine.
    pi lightdm-gtk-greeter
    # ok, this is really weird
    # normally this file has
    sd /etc/X11/Xsession.d/99x11-common_start <<'EOF'
# this is very odd.
# this file normally just has: exec $STARTUP
# but then ~/.xsession-errors
# says $STARTUP is not found, which appears to be the real
# error, but normal bash doesnt operate that way.
# https://bugs.launchpad.net/ubuntu/+source/im-config/+bug/1879352
eval exec $STARTUP
EOF
    # also, gdm wayland was default, had to do
    # dpkg-reconfigure gdm3
    # and choose lightdm.
    #
    ;;
esac


if [[ $codename_compat == flidas ]]; then
  # doesnt exist in newer
  pi gnupg-doc
fi


case $distro in
  trisquel)
    case $codename in
      *)
        # firefox would work here too, apt would select abrowser.
        # and the update-alternatives thing i think is becuz firefox is
        # generally available before abrowser and this helps fix things
        # up when we have both.
        pi abrowser
        s update-alternatives --set x-www-browser /usr/bin/abrowser
        ;;
    esac
    ;;
  ubuntu)
    pi firefox
    ;;
  debian)
    pi firefox-esr
    ;;
esac

# newer distros just use adb for package name it seems
case $codename_compat in
  bionic|stretch)
    pi android-tools-adbd
    ;;
esac

case $codename_compat in
  focal)
    pi libext2fs-dev libzstd-dev
    cd /a/opt/btrfs-progs
    ;;
esac


case $codename_compat in
  bionic)
    pi python-vte
    ;;
  *)
    pi reportbug-gtk
    ;;
esac

# not packaged in newer distros it seems
case $codename_compat in
  bionic|buster|stretch)
    pi dtrx
    ;;
esac


# TODO: some of the X programs can be removed from pall when using wayland

# depends gcc is a way to install suggests. this is apparently the only
# way to install suggests even if the main package is already
# installed. reinstall doesn't work, uninstalling can cause removing
# dependent packages.
pi ${pall[@]} $(apt-cache search ruby[.0-9]+-doc| awk '{print $1}') $($src/distro-pkgs)


# commented, not worth the hassle i think.
#seru enable psd
#seru start psd


# old filename
sudo rm -fv /etc/systemd/resolved.conf.d/iank.conf

# website is dead june 14 2019. back in october, but meh
sudo rm -fv /etc/apt/sources.list.d/iridium-browser.list
# case $distro in
#   debian)
#     pi chromium ;;
#   trisquel|ubuntu)
#     wget -qO - https://downloads.iridiumbrowser.de/ubuntu/iridium-release-sign-01.pub|sudo apt-key add -
#     t=$(mktemp)
#     cat >$t <<EOF
# deb [arch=amd64] https://downloads.iridiumbrowser.de/deb/ stable main
# #deb-src https://downloads.iridiumbrowser.de/deb/ stable main
# EOF
#     f=/etc/apt/sources.list.d/iridium-browser.list
#     if ! diff -q $t $f; then
#       s cp $t $f
#       s chmod 644 $f
#       p update
#     fi
#     pi iridium-browser
#     ;;
# esac


### begin home vpn server setup


# # this section done initially to make persistent keys.
# # Also note, I temporarily set /etc/hosts so my host was
# # b8.nz when running this, since the vpn client config
# # generator assumes we need to go to that server to get
# # server keys.
# vpn-server-setup -rds
# s cp -r --parents /etc/openvpn/easy-rsa/keys /p/c/filesystem
# s chown -R 1000:1000 /p/c/filesystem/etc/openvpn/easy-rsa/keys
# # kw = kgpe work machine.
# for host in x2 x3 kw; do
# vpn-mk-client-cert -b $host -n home b8.nz 1196
# dir=/p/c/machine_specific/$host/filesystem/etc/openvpn/client
# mkdir -p $dir
# s bash -c "cp /etc/openvpn/client/home* $dir"
#     # note: /etc/update-resolv-conf-home also exists for all systems with /p
# done

# key already exists, so this won't generate one, just the configs.
# m vpn-server-setup -rds
# sudo tee -a /etc/openvpn/server/server.conf <<'EOF'
# push "dhcp-option DNS 10.0.0.1"
# push "route 10.0.0.0 255.255.0.0"
# client-connect /a/bin/distro-setup/vpn-client-connect
# EOF
# sudo sed -i --follow-symlinks 's/10.8./10.9./g;s/^\s*port\s.*/port 1196/' /etc/openvpn/server/server.conf

# if [[ $HOSTNAME == tp ]]; then
#   if [[ -e /lib/systemd/system/openvpn-server@.service ]]; then
#     vpn_service=openvpn-server@server
#   else
#     vpn_service=openvpn@server
#   fi
#   sgo $vpn_service
# fi
### end vpn server setup

##### rss2email
if mountpoint /p &>/dev/null; then
  # note, see bashrc for more documentation.
  pi rss2email
  sd /etc/systemd/system/rss2email.service <<'EOF'
[Unit]
Description=rss2email
After=multi-user.target

[Service]
User=iank
Type=oneshot
# about 24 hours of failures
# it copies over its files without respecting symlinks, so
# we pass options to use different location.
ExecStart=/usr/local/bin/sysd-mail-once -288 rss2email r2e -d /p/c/rss2email.json -c /p/c/rss2email.cfg run
EOF
  sd /etc/systemd/system/rss2email.timer <<'EOF'
[Unit]
Description=rss2email

[Timer]
# for initial run. required.
OnActiveSec=30
# for subsequent runs.
OnUnitInactiveSec=300

[Install]
WantedBy=timers.target
EOF
  sudo systemctl daemon-reload
fi


######### begin irc periodic backup #############
if [[ $HOSTNAME == frodo ]]; then
  sd /etc/systemd/system/ircbackup.service <<'EOF'
[Unit]
Description=irc li backup
After=multi-user.target

[Service]
User=iank
Type=oneshot
ExecStart=/usr/local/bin/sysd-mail-once irc-backup rsync -rlptDhSAX root@iankelling.org:/var/lib/znc/moddata/log/iank/freenode/ /k/irclogs
EOF
  sd /etc/systemd/system/ircbackup.timer <<'EOF'
[Unit]
Description=irc li backup hourly

[Timer]
OnCalendar=hourly

[Install]
WantedBy=timers.target
EOF
  sudo systemctl daemon-reload
  sgo ircbackup.timer
fi


######### end irc periodic backup #############


pi-nostart openvpn
# pi-nostart does not disable
ser disable openvpn


if [[ -e /p/c/gen-fsf-vpn ]]; then
  /p/c/gen-fsf-vpn
fi

if [[ -e /p/c/machine_specific/$HOSTNAME/filesystem/etc/openvpn/client/hole.crt ]]; then
  sgo openvpn-client@hole
fi

if [[ $HOSTNAME == frodo ]]; then
  vpn-mk-client-cert -b frodo -n hole iankelling.org
fi

############# begin syncthing setup ###########
case $HOSTNAME in
  kd|frodo)
    f=/usr/share/keyrings/syncthing-archive-keyring.gpg
    if [[ ! -e $f ]]; then
      s curl -s -o $f https://syncthing.net/release-key.gpg
    fi
    s="deb [signed-by=/usr/share/keyrings/syncthing-archive-keyring.gpg] https://apt.syncthing.net/ syncthing stable"
    if [[ $(cat /etc/apt/sources.list.d/syncthing.list) != "$s" ]]; then
      echo "$s" | sd /etc/apt/sources.list.d/syncthing.list
      p update
    fi
    pi syncthing
    ;;&
  frodo)
    m lnf -T /w/syncthing /home/iank/.config/syncthing
    ser daemon-reload # syncthing likely not properly packaged
    sgo syncthing@iank # runs as iank
    ;;
  kd)

    # 1003 just happens to be what was on my system
    if ! getent passwd ziva; then
      s groupadd -g 1003 ziva
      # syncthing state / config / db are all in ~/.config/syncthing
      s useradd -g 1003 -u 1003 -d /d/ziva-home -c ziva -s /bin/bash ziva
    fi
    sgo syncthing@ziva
    ;;
esac

# user for short term use dropping of privileges

if ! getent group zu &>/dev/null; then
  s groupadd -g 1023 zu
fi
if ! getent passwd zu &>/dev/null; then
  s useradd -g 1023 -u 1023 -c zu -s /bin/bash zu
fi


# these things persist in ~/.config/syncthing, which I save in
# /w/syncthing (not in /p, because syncthing should continue to
# run on home server even when using laptop as primary device)
# open http://localhost:8384/
# change listen address from default to tcp://:22001,
# this is because we do port forward so it doesn\'t have to use
# some external server, but the syncthing is broken for port forward,
# you get a message, something "like connected to myself, this should not happen"
# when connecting to other local devices, so I bump the port up by 1,
# based on
# https://forum.syncthing.net/t/connected-to-myself-should-not-happen/1763/19.
# Without this, it was being stuck syncing at 0%.
# Set gui username and password.
#
# install syncthing via f-droid,
# folder setting, turn off send only.
# on phone, add device, click bar code icon
# on dekstop, top right, actions, device id
# after adding, notification will appear on desktop to confirm
#
# syncing folder. from phone to desktop: select desktop in the
# folder on phone\'s sync options, notification will appear in
# desktop\'s web ui within a minute. For the reverse, the
# notification will appear in android\'s notifications, you have to
# swipe down and tap it to add the folder. It won\'t appear in the
# syncthing ui, which would be intuitive, but don\'t wait for it
# there. The notification may not work, instead open the web gui
# from in the app, there should be a notification within there.
#
# On phone, set settings to run syncthing all the time, and
# show no notification.
#
# Folder versioning would make sense if I didn\'t already use btrfs
# for backups. I would choose staggered, or trash can for more space.
#
# if needed to install on a remote comp:
# ssh -L 8384:localhost:8384 -N frodo
# open http://localhost:8384/
#
# Note, the other thing i did was port forward port 22000,
# per https://docs.syncthing.net/users/firewall.html

#############  end syncthing setup ###########



####### begin misc packages ###########

# template
case $codename in
  flidas)
    :
    ;;
esac

sudo update-alternatives --set pinentry /usr/bin/pinentry-gtk-2


# sakura config is owned by ian
m reset-sakura
m reset-konsole
m sudo -u user2 -i reset-konsole
# user2 xscreensaver we don't want to reset
m reset-xscreensaver


# this would install from cabal for newer / consistent version across os, but it screws up xmonad, so disabled for now.
# this is also in primary-setup
# pi libxss-dev # dependency based on build failure
# cabal update
# cabal install --upgrade-dependencies  --force-reinstalls arbtt
# also, i assume syncing this between machines somehow messed up the data.
if mountpoint /p &>/dev/null; then
  case $codename in
    etiona|nabia)
      pi arbtt
      # same as seru enable arbtt, but works over ssh when systemctl --user causes error:
      # Failed to connect to bus: No such file or directory
      lnf -T  /a/bin/ds/subdir_files/.config/systemd/user/arbtt.service /home/iank/.config/systemd/user/default.target.wants/arbtt.service
      # allow failure
      seru start arbtt ||:
      ;;
  esac
fi


m primary-setup

if [[ ! -e ~/.linphonerc && -e /p/.linphonerc-initial ]]; then
  m cp /p/.linphonerc-initial ~/.linphonerc
fi

# linphone in t10 wont do dns with systemd-resolved or something
s teeu /etc/hosts <<'EOF'
74.94.156.215 watson.fsf.org
EOF



### begin spd install
if mountpoint /p &>/dev/null; then
  pi libswitch-perl libdigest-md5-file-perl libgnupg-interface-perl
  t=$(mktemp)
  m wget -O $t http://mirror.fsf.org/fsfsys-trisquel/fsfsys-trisquel/pool/main/s/spd-perl/spd-perl_0.2-1_amd64.deb
  sudo dpkg -i $t
  m rm $t
  # this guesses at the appropriate directory, adjust if needed
  perldir=(/usr/lib/x86_64-linux-gnu/perl/5.*)
  m sudo ln -sf ../../../perl/5.18.2/SPD/ ${perldir[0]}
  # newer distro had gpg2 as default, older one, flidas, need to make it that way
  gpgpath=$(which gpg2) ||:
  if [[ $gpgpath ]]; then
    sudo mkdir -p /usr/local/spdhackfix
    s lnf -T $gpgpath /usr/local/spdhackfix/gpg
  fi
fi
### end spd install


# nagstamon setting which were set through the ui
# monitor url https://klaxon.fsf.org/cgi-bin
# monitor url cgi https://klaxon.fsf.org/cgi-bin
# in filters tab:
# all unknown services
# all warning services
# acknowledged hosts & services
# hosts & services down for maintenence
# services on down hosts
# services on hosts in maintenece
# services on unreachable osts
# hosts in soft state
# services in soft state
# in display tab: fullscreen

# these translate to these settings I think
# filter_acknowledged_hosts_services = True
# filter_all_unknown_services = True
# filter_all_warning_services = True
# filter_hosts_in_soft_state = True
# filter_hosts_services_maintenance = True
# filter_services_in_soft_state = True
# filter_services_on_down_hosts = True
# filter_services_on_hosts_in_maintenance = True
# filter_services_on_unreachable_hosts = True
# notify_if_up = False
# statusbar_floating = False
# fullscreen = True
# but i'm just going to rely on the webpage plus sms for now.


# it asks if it should make users in it's group capture packets without root,
# which is arguably more secure than running wireshark as root. default is no,
# which is what i prefer, since I plan to use tcpdump to input to wireshark.
s DEBIAN_FRONTEND=noninteractive pi wireshark-gtk

# /run and /dev/shm are listed as required for pulseaudio. All 4 in the group
# listed in the default config as suggested.
# /run/usr/1000 i noticed was missing for pulseaudio
# /run/user/0 just seemed like a not bad idea, given the above
tu /etc/schroot/desktop/fstab <<'EOF'
/p             /p              none    rw,bind         0       0
/a             /a              none    rw,bind         0       0
/run           /run            none    rw,bind         0       0
/run/lock      /run/lock       none    rw,bind         0       0
/dev/shm       /dev/shm        none    rw,bind         0       0
/run/shm       /run/shm        none    rw,bind         0       0
/run/user/1000 /run/user/1000  none    rw,bind         0       0
/run/user/1001 /run/user/1001  none    rw,bind         0       0
/run/user/0    /run/user/0     none    rw,bind         0       0
EOF

sd /etc/systemd/system/schrootupdate.service <<'EOF'
[Unit]
Description=schrootupdate
After=multi-user.target

[Service]
Type=oneshot
ExecStart=/usr/local/bin/sysd-mail-once schrootupdate /a/bin/distro-setup/schrootupdate
EOF
sd /etc/systemd/system/schrootupdate.timer <<'EOF'
[Unit]
Description=schrootupdate

[Timer]
OnCalendar=*-*-* 04:20:00

[Install]
WantedBy=timers.target
EOF
ser daemon-reload
sgo schrootupdate.timer



# for my roommate
case $distro in
  trisquel)
    m mkschroot -s /a/bin/fai/fai/config/files/etc/apt/sources.list.d/bullseye.list/BULLSEYE_FREE \
      debian bullseye firefox-esr pulseaudio chromium anki
    case $(debian-codename) in
      etiona|nabia)
        # we have a lot of t8 stuff, useful to have
        m mkschroot -s /a/bin/fai/fai/config/files/etc/apt/sources.list.d/flidas.list/FLIDAS \
          trisquel flidas
        tu /nocow/schroot/flidas/etc/sudoers <<EOF
$USER  ALL=(ALL)  NOPASSWD: ALL
Defaults  env_keep += SUDOD
Defaults always_set_home
Defaults !umask
EOF
        sd /nocow/schroot/flidas//etc/locale.gen <<'EOF'
en_US.UTF-8 UTF-8
EOF
        s schroot -c flidas locale-gen
        s schroot -c flidas update-locale LANG=en_US.UTF-8
        ;;
    esac
    ;;
  debian)
    pi chromium
    ;;
esac

sudo mkdir -p /nocow/user
sudo chown $USER:$USER /nocow/user
pi anki


####### begin transmission

case $HOSTNAME in
  frodo)
    tdir=/i/k
    ;;
  kd)
    tdir=/d/tor
    ;;
  *)
    tdir=/nocow/user/tor
    ;;
esac

mkdir -p $tdir

# adapted from /var/lib/dpkg/info/transmission-daemon.postinst
# 450 seems likely to be unused. we need to specify one or else
# it won't be stable across installs.
if ! getent passwd debian-transmission > /dev/null; then
  sudo groupadd -g 450 debian-transmission
  sudo adduser --quiet \
       --gid 450 \
       --uid 450 \
       --system \
       --no-create-home \
       --disabled-password \
       --home /var/lib/transmission-daemon \
       debian-transmission
fi
# We want group writable stuff from transmission.
# However, after setting this, I learn that transmission sets it's
# own umask based on it's settings file. Well, no harm leaving this
# so it's set right from the beginning.
sudo chfn debian-transmission -o umask=0002

# note i had to do this, which is persistent:
# cd /i/k
# s chgrp debian-transmission torrents partial-torrents

# syslog says things like
# 'Failed to set receive buffer: requested 4194304, got 425984'
# google suggets giving it even more than that
tu /etc/sysctl.conf<<'EOF'
net.core.rmem_max = 67108864
net.core.wmem_max = 16777216
EOF
sudo sysctl -p

# some reason it doesn\'t seem to start automatically anyways
pi-nostart transmission-daemon
# be extra sure its not started
ser disable transmission-daemon
ser stop transmission-daemon

# the folder was moved here after an install around 02/2017.
# it contains runtime data,
# plus a simple symlink to the config file which it\'s
# not worth separating out.
# between comps, the uid can change

f=$tdir/transmission-daemon
for d in $tdir/partial-torrents $tdir/torrents $f; do
  if [[ ! -d $d ]]; then
    mkdir $d
  fi
  sudo chown -R debian-transmission:user2 $d
done
s lnf -T $f /var/lib/transmission-daemon/.config/transmission-daemon
s lnf -T /etc/transmission-daemon/settings.json $f/settings.json
sudo chown -R debian-transmission:debian-transmission $f
sudo chown -R debian-transmission:debian-transmission /var/lib/transmission-daemon
#
# config file documented here, and it\'s the same config
# for daemon vs client, so it\'s documented in the gui.
# https://trac.transmissionbt.com/wiki/EditConfigFiles#Options
#
# I originaly setup rpc-whitelist, but after using
# routing to a network namespace, it doesn\'t see the
# real source address, so it\'s disabled.
#
# Changed the cache-size to 256 mb, reduces disk use.
# It is a read & write cache.
sudo ruby <<EOF
require 'json'
p = '/etc/transmission-daemon/settings.json'
File.write(p, JSON.pretty_generate(JSON.parse(File.read(p)).merge({
'rpc-whitelist-enabled' => false,
'rpc-authentication-required' => false,
'incomplete-dir' => '$tdir/partial-torrents',
'incomplete-dir-enabled' => true,
'download-dir' => '$tdir/torrents',
"speed-limit-up" => 800,
"speed-limit-up-enabled" => true,
"peer-port" => 61486,
"cache-size-mb" => 256,
"ratio-limit" => 5.0,
"ratio-limit-enabled" => false,
})) + "\n")
EOF

####### end transmission

case $HOSTNAME in
  kd)
    # to persist upload/dl metadata. initially, moved all the stuff
    # in /var/lib/transmission-daemon to /d/tor
    s usermod --home /d/tor debian-transmission
    sgo transmission-daemon-nn

    ;;
esac


######### begin transmission client setup ######

if [[ -e /p/transmission-rpc-pass ]]; then
  # arch had a default config,
  # debian had nothing until you start it.
  # With a little trial an error, here is a minimal config
  # taken from the generated one, plus changes that the
  # settings ui does, without a bunch of ui crap settings.
  #
  # only settings I set were
  # hostname
  # auto-connect
  # password

  # the password is randomly generated on first run, i copied it out
  # so it could be used by other hosts.
  sudo ruby <<'EOF'
require 'json'
p = '/etc/transmission-daemon/settings.json'
s = JSON.parse(File.read(p))
s["rpc-password"] = File.read("/p/transmission-rpc-pass").chomp
# default is 0022 (18 in decimal)
s["umask"] = 2
File.write p, JSON.pretty_generate(s)
EOF

  rpc_pass=$(</p/transmission-rpc-pass)
  for f in /home/*; do
    u=${f##*/}
    uid=$(id -u $u 2>/dev/null) || continue
    if [[ ! $uid -ge 1000 ]]; then
      continue
    fi
    d=$f/.config/transmission-remote-gtk
    sudo -u $u mkdir -p $d
    # i tried setting hostname to transmission.b8.nz, so i could dynamically change where
    # this connects to, but it said some 421 denied error when I did that. Then it
    # froze X when i ran it under strace. Whatever.
    sudo -u $u dd of=$d/config.json <<EOF
{
  "profiles" : [
      {
      "profile-name" : "Default",
      "hostname" : "10.173.0.2",
      "rpc-url-path" : "/transmission/rpc",
      "username" : "",
      "password" : "$rpc_pass",
      "auto-connect" : true,
      "ssl" : false,
      "timeout" : 40,
      "retries" : 3,
      "update-active-only" : false,
      "activeonly-fullsync-enabled" : false,
      "activeonly-fullsync-every" : 2,
      "update-interval" : 3,
      "min-update-interval" : 3,
      "session-update-interval" : 60,
      "exec-commands" : [],
      "destinations" : []
      }
  ],
  "profile-id" : 0,
  "add-options-dialog" : false
}
EOF
  done
fi
######### end transmission client setup ######


### printer setup
pi cups

sudo gpasswd -a $USER lpadmin # based on ubuntu wiki
# goto http://127.0.0.1:631
# administration tab, add new printer button.
# In debian, I could use hte recommended driver,
# in arch, I had to pick out the 6L driver.


# bridge networking as user fails. google lead here, but it doesn\'t work:
# oh well, I give up.
# http://wiki.qemu.org/Features-Done/HelperNetworking
# s mkdir /etc/qemu
# f=/etc/qemu/bridge.conf
# sd $f <<'EOF'
# allow br0
# EOF
# #s chown root:qemu $f # debian has somethig like qemu-libvirt. equivalent?
# s chmod 640 $f

# general known for debian/ubuntu, not for fedora

m /a/bin/buildscripts/go
m /a/bin/buildscripts/rust
m /a/bin/buildscripts/misc
m /a/bin/buildscripts/pithosfly
#m /a/bin/buildscripts/alacritty
m /a/bin/buildscripts/kitty

pi-nostart virtinst virt-manager
soff libvirtd
# i cant if this is whats causing it to start even though
# its disabled. note: it leaves around dnsmasq instances even
# if you stop it. what the hell systemd?
soff libvirt-guests
# allow user to run vms, from debian handbook. libvirt-qemu
# based on https://www.whonix.org/wiki/KVM#First-time_User.3F
for x in iank user2; do s usermod -a -G libvirt,kvm,libvirt-qemu $x; done


pi --no-install-recommends kdeconnect
### kdeconnect for gnome. started in /a/bin/distro-setup/desktop-20-autostart.sh
### but gnome + xmonad not working in flidas, so i disabled it
# pi libgtk-3-dev python3-requests-oauthlib valac cmake python-nautilus libappindicator3-dev
# cd /a/opt/indicator-kdeconnect
# mkdir -p build
# cd build
# cmake .. -DCMAKE_INSTALL_PREFIX=/usr
# make
# sudo make install
# # we can start it manually with /usr/lib/x86_64-linux-gnu/libexec/kdeconnectd
# # it seems, according to
# # /etc/xdg/autostart/kdeconnectd.desktop
# # I'm not seeing the icon, but the clipboard replication is working


### model 01 arduino support ###
# https://github.com/keyboardio/Kaleidoscope/wiki/Install-Arduino-support-on-Linux
# also built latest arduino in /a/opt/Arduino, (just cd build; ant build; ant run )
# set arduino var in bashrc,
# have system config file setup too.
sudo adduser $USER dialout

# this is for the mail command too. update-alternatives is kind of misleading
# since at least it's main commands pretend mail does not exist.
# bsd's mail got pulled in on some dumb dependency, i dunno how.
sudo update-alternatives --set mailx /usr/bin/mail.mailutils

######### end misc packages #########


# packages I once used before and liked, but don\'t want installed now for
# various reasons:
# python-sqlite is used for offlineimap
# lxappearance python-sqlite dolphin paman dconf-editor



######## unfinished

# todo, finish configuring smart.

pi smartmontools
# mostly from https://wiki.archlinux.org/index.php/S.M.A.R.T.
# turn on smart. background on options:
# first line, -a = test everyting on all devices.
# -S on, turn on disk internal saving of vendor specific info,
# from google, seems like this is usually already on and fairly standard.
# -o on, turn on 4 hour period non-performance degrading testing.
# short test daily 2-3am, extended tests Saturdays between 3-4am:
sched="-s (S/../.././02|L/../../6/03)"
sudo sed -i --follow-symlinks "s#^[[:space:]]*DEVICESCAN.*#\
DEVICESCAN -a -o on -S on -n standby,q $sched \
-m root@mail.iankelling.org -M exec /usr/local/bin/smart-notify#" /etc/smartd.conf

# in the default configuration of at least ubuntu 14.04, resolvconf is
# configured to order any nameservers associated with tun* or tap*
# before the normal internet interfaces, which means they are always
# consulted first. This is often slower and undesirable, ie. local dns
# queries go from 0ms to 10+ or 100+ ms. To reverse the ordering, you
# can do:
#sudo sed -i --follow-symlinks '/tun\*\|tap\*/d' /etc/resolvconf/interface-order
# however, this breaks dns lookup for hosts on the openvpn lan.
# I can\'t figure out why hosts on the normal lan would not be
# broken under the default ordering, except the host I was
# testing with previously had an entry in /etc/hosts.

############# end unfinished

########### misc stuff

if [[ $HOSTNAME != frodo ]]; then
  # remove. i moved this into dns
  echo | s cedit hole /etc/hosts ||:
fi

if [[ ! -e ~/.local/bin/pip ]]; then
  tmp=$(mktemp)
  wget -O$tmp https://bootstrap.pypa.io/get-pip.py
  python3 $tmp --user
  hash -r
fi


### begin timetrap setup
if mountpoint /p &>/dev/null; then
  mkdir -p ~/.timetrap/
  ln -sf /a/opt/timetrap_formatters ~/.timetrap/formatters
  if ! type -p t &>/dev/null; then
    pi ruby-dev libsqlite3-dev
    gem install --user timetrap
  fi
fi
### end timetrap setup

# leftover cleanup for t9
pu resolvconf

case $codename in
  # needed for debootstrap scripts for fai since fai requires debian
  flidas)
    pi dnsmasq
    pi-nostart network-manager
    # i hate networkmanager. noo, of course disabling it doesnt work
    # unless you add a hack. found this by doing
    # systemd-analyze dot > x.dot
    # less x.dot
    # /networkman
    soff NetworkManager
    soff NetworkManager-wait-online.service
    # make networkmanager use resolvconf instead of its own dnsmasq which
    # conflicts with the normal dnsmasq package.
    f=/etc/NetworkManager/NetworkManager.conf
    m=$(md5sum $f)
    sudo sed -ri '/ *\[main\]/,/^ *\[[^]]+\]/{/^\s*dns[[:space:]=]/d}' $f
    sudo sed -ri '/ *\[main\]/a dns=default' $f
    if [[ $m != $(md5sum $f) ]]; then
      srestart NetworkManager
    fi
    # networkmanager has this nasty behavior on flidas: if the machine
    # crashes with dnsmasq running, on subsequent boot, it adds an entry to
    # resolvconf for 127.0.0.1 in some stupid attempt to restore
    # nameservers.
    # This can be manually fixed by stoping dnsmasq,
    # then based on whats in /run/dnsmasq/, i see we can run
    # s resolvconf -d NetworkManager
    # oh ya, and stoping NetworkManager leaves this crap behind without cleaning it up.
    ser disable NetworkManager
    ;;
esac

# I have no use for avahi,
# had to run this twice when doing manually, i dunno why
soff avahi-daemon ||:
sleep 1
soff avahi-daemon

# make my /etc/fonts/conf.d/ get used.
# I have a new sans-serif font there because the default one
# displays l and I as the same char, grrrrr.
sudo fc-cache

pi desktop-file-utils
m /a/bin/distro-setup/mymimes


sgo dynamicipupdate.timer


# stop autopoping windows when i plug in an android phone.
# dbus-launch makes this work within an ssh connection, otherwise you get this message,
# with still 0 exit code.
# dconf-WARNING **: failed to commit changes to dconf: Cannot autolaunch D-Bus without X11 $DISPLAY
m dbus-launch gsettings set org.gnome.desktop.media-handling automount-open false


# on grub upgrade, we get prompts unless we do this
devs=()
for dev in $(s btrfs fil show /boot | sed -nr 's#.*path\s+(\S+)$#\1#p'); do
  devs+=("$(devbyid $dev),")
done
devs[-1]=${devs[-1]%,} # jonied by commas
sudo debconf-set-selections <<EOF
grub-pc grub-pc/install_devices multiselect ${devs[*]}
EOF

# btrfs maintenance
sgo btrfsmaint.timer
sgo btrfsmaintstop.timer

sgo systemstatus.timer


if grep -xFq $HOSTNAME /a/bin/ds/machine_specific/btrbk.hosts; then
  sgo btrbk.timer
fi
# note: to see when it was last run,
# ser list-timers

case $HOSTNAME in
  kd)
    sgo btrbkrust.timer
    ;;
esac

end_msg <<'EOF'
In mate settings settings, change scrolling to two-finger,
because the default edge scroll doesn\'t work. Originally found this in debian.
EOF

# Remove dep that came in with desktop to fix associations.
m pu transmission-gtk

case $HOSTNAME in
  kd)
    lnf -T /d/vidshare /home/iank/Videos
    ;;
esac

# # Based on guix manual instructions, also added code to profile.
# # disabled since i'm not using it now.
# pi nscd
# if ! type -p guix >/dev/null; then
#   cd $(mktemp -d)
#   wget https://git.savannah.gnu.org/cgit/guix.git/plain/etc/guix-install.sh
#   # added some stuff to envonment.sh for profile based on
#   # manual instructions
#   # wget https://sv.gnu.org/people/viewgpg.php?user_id=15145 -qO - | gpg --import -
#   # echo is to get past prompt
#   yes | sudo -E HOME=$HOME bash guix-install.sh || [[ $? == 141 ]]
#   guix install glibc-utf8-locales
#   guix package --install guile
# fi

lnf -T /a/opt ~/src

pi tor
m /a/bin/buildscripts/tor-browser
# one root command needed to install
s ln -sf /a/opt/tor-browser_en-US/Browser/start-tor-browser /usr/local/bin


# nfs server
pi-nostart nfs-kernel-server

if [[ $HOSTNAME == tp ]]; then
  sd /etc/wireguard/wg0.conf <<EOF
[Interface]
PrivateKey = $(cat /p/c/machine_specific/tp/filesystem/root/wg.key)
Address = 10.3.0.2/24, fdfd::2/64

[Peer]
PresharedKey = $(cat /p/c/machine_specific/tp/filesystem/root/wg.psk)
PublicKey = 9RnAsJB+ISrA/9lmDKBoT08oBiKwzA64exBBj+rO+ng=
Endpoint = b8.nz:26000
AllowedIPs = 10.3.0.1/24, fdfd::1/64
PersistentKeepalive = 20
EOF
  sudo systemctl enable wg-quick@wg0
  sudo systemctl start wg-quick@wg0
fi


if [[ $HOSTNAME == kw ]]; then
  # hosts 1-199. 200+ are dynamic, avoid those
  tu /etc/exports <<'EOF'
/root/.ianktrisquel_9/.iank/e/e 192.168.0.0/25(rw,no_root_squash,async,no_subtree_check) 192.168.0.128/26(rw,no_root_squash,async,no_subtree_check) 192.168.0.192/29(rw,no_root_squash,async,no_subtree_check)
/home/iank/.iank/e/e 192.168.0.0/25(rw,no_root_squash,async,no_subtree_check) 192.168.0.128/26(rw,no_root_squash,async,no_subtree_check) 192.168.0.192/29(rw,no_root_squash,async,no_subtree_check)
EOF
  ekw
  sgo nfs-server
  sudo exportfs -rav
fi


# if I was going to create a persistent vm, i might do it like this:
# variant=something  # from: virt-install --os-variant list
# s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
  #   --disk=/a/images/some_name.qcow2,bus=virtio --vcpus 2 -r 4096 -w bridge=br0 \
  #   -n some_name --import --os-variant $variant --cpu host-model-only


# for brother HL-2270DW, this worked:
# https://askubuntu.com/questions/1067234/cant-use-wireless-brother-printer-2270dw-ubuntu-18-04
# /a/opt/linux-brprinter-installer-2.2.2-1
# answer n when it asks about uri.
# Then go to cups, delete the existing printer, added on with dnssd url. browsed to
# ppd at /usr/share/ppd/HL2270DW.ppd, which is duplicated at /usr/share/cups/model/HL2270DW.ppd
# ppd file got installed from bash -x ./usr/local/Brother/Printer/HL2270DW/cupswrapper/cupswrap,
# which I downloaded from their driver. but dont do that again, i copied it to /a/opt/HL2270DW.ppd,
# use that.

# I had to reset it to use wired instead of wifi. it only uses 1 at a time. boot with go button held, after lights turn off, tap go 6 times.
# Then it was already configured, but if i needed to, go to its web ui, default pass is "access".

######### begin stuff belonging at the end    ##########

end