#!/bin/bash -l
# Copyright (C) 2016 Ian Kelling

# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     http://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

### setup
source /a/bin/errhandle/err
src="$(readlink -f -- "${BASH_SOURCE[0]}")"; src=${src%/*} # directory of this file

# shellcheck source=./pkgs
source $src/pkgs

set -x
exec &> >(sudo tee -a /var/log/distro-end)
echo "$0: $(date): starting now)"
# see example of usage to understand.
end_msg() {
  local y
  IFS= read -r -d '' y  ||:
  end_msg_var+="$y"
}
die() {
  printf "$0: %s\n" "$*" >&2; exit 1
}
spa() { # simple package add
  simple_packages+=($@)
}
distro=$(distro-name)
codename=$(debian-codename)
codename_compat=$(debian-codename-compat)
pending_reboot=false
sed="sed --follow-symlinks"
# template
case $distro in
esac

#### initial packages
pup
if isdeb; then
  pi aptitude
fi

# avoid prompts
s debconf-set-selections <<EOF
popularity-contest popularity-contest/participate boolean true
EOF

########### begin section including li ################
pi ${p2[@]}


conflink

case $distro in
  arch) sgo cronie ;;
esac

case $distro in
  arch) sgo atd ;;
  # not needed for deb, dependency of at.
esac



# no equivalent in other distros:
if isdeb && pcheck apt-file; then
  # this condition is just a speed optimization
  pi apt-file
  s apt-file update
fi


# disable motd junk.
case $distro in
  debian)
    # allows me to pipe with ssh -t, and gets rid of spam
    # http://forums.debian.net/viewtopic.php?f=5&t=85822
    # i'd rather disable the service than comment the init file
    # this says disabling the service, it will still get restarted
    # but this script doesn't do anything on restart, so it should be fine
    s dd of=/var/run/motd.dynamic if=/dev/null
    ;;
  trisquel|ubuntu)
    # this isn't a complete solution. It still shows me when updates are available,
    # but it's no big deal.
    s t /etc/update-motd.d/10-help-text /etc/update-motd.d/00-header
    ;;
esac




### begin certbot install ###
if [[ $distro == debian ]]; then
  # note, need python-certbot-nginx for nginx, but it depends on nginx,
  # and I'm not installing nginx by default right now.
  pi certbot python-certbot-apache
elif [[ $codename_compat == xenial ]]; then
  # not packaged in xenial or flidas
  pi software-properties-common
  l="deb http://ppa.launchpad.net/certbot/certbot/ubuntu xenial main"
  if ! grep -xFq "$l" /etc/apt/sources.list{,.d/*.list}; then
    s add-apt-repository -y ppa:certbot/certbot ||:
    p update
  fi
  pi python-certbot-apache
else
  die "distro unknown for certbot"
fi
# make a version of the certbot timer that emails me.
x=/systemd/system/certbot
$sed -r -f - /lib$x.timer <<'EOF' |s dd of=/etc${x}mail.timer
s,^Description.*,\0 mail version,
EOF
$sed -r -f - /lib$x.service <<'EOF' |s dd of=/etc${x}mail.service
s,(ExecStart=)(/usr/bin/certbot),\1/a/bin/log-quiet/sysd-mail-once certbotmail \2 --renew-hook /a/bin/distro-setup/certbot-renew-hook,
EOF
ser daemon-reload
sgo certbotmail.timer
### end certbot install ###


# dogcam setup. not using atm
# case $HOSTNAME in
#   lj|li)
#     /a/bin/webcam/install-server
#     ;;
#   kw)
#     /a/bin/webcam/install-client
#     ;;
# esac


## not actually using prometheus just yet
# # office is not exposed to internet yet
# if [[ $HOSTNAME != kw ]]; then
#   ## prometheus node exporter setup
#   web-conf -f 9100 -p 9101 apache2 $(hostname -f) <<'EOF'
# #https://httpd.apache.org/docs/2.4/mod/mod_authn_core.html#authtype
# # https://stackoverflow.com/questions/5011102/apache-reverse-proxy-with-basic-authentication
# <Location />
#    AllowOverride None
#    AuthType basic
#    AuthName "Authentication Required"
#    # setup one time, with root:www-data, 640
#    AuthUserFile "/etc/prometheus-htpasswd"
#    Require valid-user
# </Location>
# EOF
# fi

# website setup
case $HOSTNAME in
  li)

    pi bind9


    case $HOSTNAME in
      li) domain=iankelling.org ;;
    esac
    /a/h/setup.sh $domain
    /a/h/build.rb

    # start mumble only when im going to use it, since i dont use it much
    pi-nostart mumble-server
    s $sed -ri "s/^ *(serverpassword=).*/\1$(< /a/bin/bash_unpublished/mumble_pass)/" /etc/mumble-server.ini

    # do certificate to avoid warning about unsigned cert,
    # which is overkill for my use, but hey, I'm cool, I know
    # how to do this.
    web-conf apache2 mumble.iankelling.org
    s rm -f /etc/apache2/sites-enabled/mumble.iankelling.org
    sudo -i <<'EOF'
export RENEWED_LINEAGE=/etc/letsencrypt/live/mumble.iankelling.org
/a/bin/distro-setup/certbot-renew-hook
EOF


    # requested from linode via a support ticket.
    # https://www.linode.com/docs/networking/an-overview-of-ipv6-on-linode/
    # ipv6 stuff pieced together
    # via slightly wrong information from
    # https://github.com/angristan/openvpn-install/blob/master/openvpn-install.sh
    # https://community.openvpn.net/openvpn/wiki/IPv6
    # and man openvpn

    vpn-server-setup -rd 2600:3c00:e000:280::1/64 2600:3c00::f03c:91ff:feb4:0bf3
    s tee /etc/openvpn/client-config/mail <<'EOF'
ifconfig-push 10.8.0.4 255.255.255.0
ifconfig-ipv6-push 2600:3c00:e000:280::2/64
EOF

    if [[ -e /lib/systemd/system/openvpn-server@.service ]]; then
      vpn_service=openvpn-server@server
    else
      vpn_service=openvpn@server
    fi

    sudo dd of=/etc/systemd/system/vpnmail.service <<EOF
[Unit]
Description=Turns on iptables mail nat

[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/a/bin/distro-setup/vpn-mail-forward start
ExecStop=/a/bin/distro-setup/vpn-mail-forward stop

[Install]
WantedBy=$vpn_service.service
EOF
    ser daemon-reload
    sgo vpnmail.service
    # needed for li's local mail delivery.
    tu /etc/hosts <<<"10.8.0.4 mail.iankelling.org"
    sgo $vpn_service
    # setup let's encrypt cert
    web-conf apache2 mail.iankelling.org
    s rm /etc/apache2/sites-enabled/mail.iankelling.org{,-redir}.conf
    ser reload apache2

    domain=cal.iankelling.org
    web-conf -f 10.8.0.4:5232 - apache2 $domain <<'EOF'
#https://httpd.apache.org/docs/2.4/mod/mod_authn_core.html#authtype
# https://stackoverflow.com/questions/5011102/apache-reverse-proxy-with-basic-authentication
<Location />
   Options +FollowSymLinks +Multiviews +Indexes
   AllowOverride None
   AuthType basic
   AuthName "Authentication Required"
   # setup one time, with root:www-data, 640
   AuthUserFile "/etc/caldav-htpasswd"
   Require valid-user
</Location>
EOF
    # nginx version of above would be:
    # auth_basic "Not currently available";
    # auth_basic_user_file /etc/nginx/caldav/htpasswd;



    ###### begin znc setup #####
    pi znc

    # https://wiki.znc.in/FAQ seems to imply that znc doesn\'t need restart after cert change.
    # to get into the web interface,
    # then use non-main browser or else it doebsn't allow it based on ocsp stapling from my main site.
    # https://iankelling.org:12533/
    sudo -i <<'EOF'
export RENEWED_LINEAGE=/etc/letsencrypt/live/iankelling.org
/a/bin/distro-setup/certbot-renew-hook
EOF

    # znc config generated by doing
    # znc --makeconf
    # selected port is also used in erc config
    # comma separated channel list worked.
    # while figuring things out, running znc -D for debug in foreground.
    # to exit and save config:
    # /msg *status shutdown
    # configed auth on freenode by following
    # https://wiki.znc.in/Sasl:
    # /msg *sasl RequireAuth yes
    # /msg *sasl Mechanism PLAIN
    # /msg *sasl Set ident_name password
    # created the system service after, and had to do
    # mv /home/iank/.znc/* /var/lib/znc
    # sed -i 's,/home/iank/.znc/,/var/lib/znc,' /var/lib/znc/config/znc.conf
    # and made a copy of the config files into /p/c
    # /msg *status LoadMod --type=global log -sanitize
    # todo: in config file AllowWeb = true should be false. better security if that is off unless we need it.
    # /msg *status LoadMod --type=network perform
    # /msg *perform add PRIVMSG ChanServ :invite #fsf-office
    # /msg *perform add JOIN #fsf-office
    #
    # i set  Buffer = 500
    # also ran /znc LoadMod clearbufferonmsg
    # it would be nice if erc supported erc query buffers by doing
    # /msg *status clearbuffer <name of the query/receiver
    # on killing the,
    # an example seems to be here:	https://github.com/zenspider/elisp/blob/master/rwd-irc.el
    # if that was the case i could remove the module clearbufferonmsg
    # also would be nice if erc supported
    # https://wiki.znc.in/self-message
    # https://wiki.znc.in/Query_buffers                                                \
      #
    s useradd --create-home -d /var/lib/znc --system --shell /sbin/nologin --comment "Account to run ZNC daemon" --user-group znc || [[ $? == 9 ]] # 9 if it exists already
    s chmod 700 /var/lib/znc
    s chown -R znc:znc /var/lib/znc
    s dd of=/etc/systemd/system/znc.service 2>/dev/null <<'EOF'
[Unit]
Description=ZNC, an advanced IRC bouncer
After=network-online.target

[Service]
ExecStart=/usr/bin/znc -f --datadir=/var/lib/znc
User=znc

[Install]
WantedBy=multi-user.target
EOF
    ser daemon-reload
    sgo znc
    ###### stop znc setup #####


    ######### begin flidas pinned packages ######
    case $(debian-codename) in
      # needed for debootstrap scripts for fai since fai requires debian
      flidas)
        curl http://archive.ubuntu.com/ubuntu/project/ubuntu-archive-keyring.gpg | s apt-key add -
        s dd of=/etc/apt/preferences.d/flidas-xenial <<EOF
Package: *
Pin: release a=xenial
Pin-Priority: -100

Package: *
Pin: release a=xenial-updates
Pin-Priority: -100

Package: *
Pin: release a=xenial-security
Pin-Priority: -100
EOF
        s dd of=/etc/apt/sources.list.d/xenial.list 2>/dev/null <<EOF
deb http://us.archive.ubuntu.com/ubuntu/ xenial main
deb http://us.archive.ubuntu.com/ubuntu/ xenial-updates main
deb http://us.archive.ubuntu.com/ubuntu/ xenial-security main
EOF

        s apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 3B4FE6ACC0B21F32
        s dd of=/etc/apt/preferences.d/flidas-bionic <<EOF
Package: *
Pin: release a=bionic
Pin-Priority: -100

Package: *
Pin: release a=bionic-updates
Pin-Priority: -100

Package: *
Pin: release a=bionic-security
Pin-Priority: -100
EOF

        # better to run btrfs-progs which matches our kernel version
        # (note, renamed from btrfs-tools)
        s dd of=/etc/apt/preferences.d/btrfs-progs <<EOF
Package: btrfs-progs libzstd1
Pin: release a=bionic
Pin-Priority: 1005

Package: btrfs-progs libzstd1
Pin: release a=bionic-updates
Pin-Priority: 1005

Package: btrfs-progs libzstd1
Pin: release a=bionic-security
Pin-Priority: 1005
EOF


        t=$(mktemp)
        cat >$t <<EOF
deb http://us.archive.ubuntu.com/ubuntu/ bionic main
deb http://us.archive.ubuntu.com/ubuntu/ bionic-updates main
deb http://us.archive.ubuntu.com/ubuntu/ bionic-security main
EOF
        f=/etc/apt/sources.list.d/bionic.list
        if ! diff -q $t $f; then
          s cp $t $f
          s chmod 644 $f
          p update
        fi

        # no special reason, but its better for btrfs-progs to
        # be closer to our kernel version
        pi btrfs-progs

        t=$(mktemp -d)
        cd $t
        aptitude download debootstrap/xenial
        ex ./*
        s cp ./usr/share/debootstrap/scripts/* /usr/share/debootstrap/scripts

        s dd of=/etc/apt/preferences.d/flidas-etiona <<EOF
Package: *
Pin: release a=etiona
Pin-Priority: -100

Package: *
Pin: release a=etiona-updates
Pin-Priority: -100

Package: *
Pin: release a=etiona-security
Pin-Priority: -100

Package: *
Pin: release a=etiona-backports
Pin-Priority: -100
EOF

        t=$(mktemp)
        cat >$t <<EOF
deb http://mirror.fsf.org/trisquel/ etiona main
deb http://mirror.fsf.org/trisquel/ etiona-updates main
deb http://archive.trisquel.info/trisquel/ etiona-security main
deb http://mirror.fsf.org/trisquel/ etiona-backports main
EOF
        f=/etc/apt/sources.list.d/etiona.list
        if ! diff -q $t $f; then
          s cp $t $f
          s chmod 644 $f
          p update
        fi

        s dd of=/etc/apt/preferences.d/debian-goodies <<EOF
Package: debian-goodies
Pin: release n=buster
Pin-Priority: 1005
EOF


        s dd of=/etc/apt/preferences.d/flidas-buster <<EOF
Package: *
Pin: release n=buster
Pin-Priority: -100
EOF

        # stupid buster uses some key algorithm not supported by flidas gpg that apt uses.
        s dd of=/etc/apt/apt.conf.d/01iank <<'EOF'
Acquire::AllowInsecureRepositories "true";
EOF

        t=$(mktemp)
        cat >$t <<EOF
deb http://http.us.debian.org/debian buster main
deb-src http://http.us.debian.org/debian buster main

deb http://security.debian.org/ buster/updates main
deb-src http://security.debian.org/ buster/updates main

deb http://http.us.debian.org/debian buster-updates main
deb-src http://http.us.debian.org/debian buster-updates main
EOF
        f=/etc/apt/sources.list.d/buster.list
        if ! diff -q $t $f; then
          s cp $t $f
          s chmod 644 $f
          p update
        fi

        # newer version needed for false positive in checkrestart
        p install -y --allow-unauthenticated debian-goodies

        s dd of=/etc/apt/preferences.d/shellcheck <<EOF
Package: shellcheck
Pin: release a=etiona
Pin-Priority: 1005

Package: shellcheck
Pin: release a=etiona-updates
Pin-Priority: 1005

Package: shellcheck
Pin: release a=etiona-security
Pin-Priority: 1005
EOF


        ;;
      *)
        if isdeb; then
          pi debian-goodies shellcheck
        fi
        ;;
    esac
    ######### end flidas pinned packages ######

    ##### begin automatic upgrades (after checkrestart has been installed) ####
    s dd of=/etc/apt/apt.conf.d/10periodic <<'EOF'
# this file was mostly just comments.
APT::Periodic::Update-Package-Lists "1";
APT::Periodic::Download-Upgradeable-Packages "1";
APT::Periodic::AutocleanInterval "7";
APT::Periodic::Unattended-Upgrade "1";
EOF

    s dd of=/etc/apt/apt.conf.d/50unattended-upgrades  <<EOF
# fyi: default file has comments about available options,
# you may want to read that.
Unattended-Upgrade::Mail "root";
Unattended-Upgrade::MailOnlyOnError "true";
Unattended-Upgrade::Remove-Unused-Dependencies "true";
Unattended-Upgrade::Origins-Pattern {
       # default is just security updates.
       "origin=*";
};
EOF

    # old names, too verbose
    s rm -f /etc/cron.d/unattended-upgrade-reboot /usr/local/bin/zelous-unattended-reboot

    s dd of=/etc/cron.d/myupgrade <<'EOF'
# Setup reboots when running outdated stuff, unattended upgrades happen
# at 6 am + rand(60 min).
20 7 * * * root /usr/local/bin/myupgrade | /usr/local/bin/log-once -1 myupgrade
0 * * * * root /usr/local/bin/mycheckrestart | /usr/local/bin/log-once -1 mycheckrestart
EOF
    ##### end automatic upgrades ####


    echo "$0: $(date): ending now)"
    exit 0
    ;;
esac

########### end section including li/lj ###############

#### desktop stuff
case $codename_compat in
  xenial)
    # mate-indicator-applet and beyond are msc things I noticed diffing a
    # standard install with mine.
    pi xorg lightdm mate-desktop-environment mate-desktop-environment-extras mate-indicator-applet anacron
    ;;
  stretch)
    pi task-mate-desktop
    ;;
  buster)
    # mate doesnt have wayland support yet
    pi task-gnome-desktop
    ;;
esac




# TODO: some of the X programs can be removed from pall when using wayland

# depends gcc is a way to install suggests. this is apparently the only
# way to install suggests even if the main package is already
# installed. reinstall doesn't work, uninstalling can cause removing
# dependent packages.
pi ${pall[@]} $(apt-cache search ruby[.0-9]+-doc| awk '{print $1}') $(apt-cache depends gcc|grep -i suggests:| awk '{print $2}') $($src/distro-pkgs)

if ! type pip; then
  x=$(mktemp)
  wget -O$x https://bootstrap.pypa.io/get-pip.py
  python3 $x --user
fi

sgo fsf-vpn-dns-cleanup


# website is dead june 14 2019
s rm -f /etc/apt/sources.list.d/iridium-browser.list
# case $distro in
#   debian)
#     pi chromium ;;
#   trisquel|ubuntu)
#     wget -qO - https://downloads.iridiumbrowser.de/ubuntu/iridium-release-sign-01.pub|sudo apt-key add -
#     t=$(mktemp)
#     cat >$t <<EOF
# deb [arch=amd64] https://downloads.iridiumbrowser.de/deb/ stable main
# #deb-src https://downloads.iridiumbrowser.de/deb/ stable main
# EOF
#     f=/etc/apt/sources.list.d/iridium-browser.list
#     if ! diff -q $t $f; then
#       s cp $t $f
#       s chmod 644 $f
#       p update
#     fi
#     pi iridium-browser
#     ;;
# esac


### begin home vpn server setup


# # this section done initially to make persistent keys.
# # Also note, I temporarily set /etc/hosts so my host was
# # b8.nz when running this, since the vpn client config
# # generator assumes we need to go to that server to get
# # server keys.
# vpn-server-setup -rds
# s cp -r --parents /etc/openvpn/easy-rsa/keys /p/c/filesystem
# s chown -R 1000:1000 /p/c/filesystem/etc/openvpn/easy-rsa/keys
# # kw = kgpe work machine.
# for host in x2 x3 kw; do
# vpn-mk-client-cert -b $host -n home b8.nz 1196
# dir=/p/c/machine_specific/$host/filesystem/etc/openvpn/client
# mkdir -p $dir
# s bash -c "cp /etc/openvpn/client/home* $dir"
#     # note: /etc/update-resolv-conf-home also exists for all systems with /p
# done

# key already exists, so this won't generate one, just the configs.
vpn-server-setup -rds
s tee -a /etc/openvpn/server/server.conf <<'EOF'
push "dhcp-option DNS 10.0.0.1"
push "route 10.0.0.0 255.255.0.0"
client-connect /a/bin/distro-setup/vpn-client-connect
EOF
s sed -i --follow-symlinks 's/10.8./10.9./g;s/^\s*port\s.*/port 1196/' /etc/openvpn/server/server.conf

if [[ $HOSTNAME == tp ]]; then
  if [[ -e /lib/systemd/system/openvpn-server@.service ]]; then
    vpn_service=openvpn-server@server
  else
    vpn_service=openvpn@server
  fi
  sgo $vpn_service
fi
### end vpn server setup


##### rss2email
# note, see bashrc for more documentation.
pi rss2email
s dd of=/etc/systemd/system/rss2email.service <<'EOF'
[Unit]
Description=rss2email
After=multi-user.target

[Service]
User=iank
Type=oneshot
# about 24 hours of failures
# it copies over its files without respecting symlinks, so
# we pass options to use different location.
ExecStart=/a/bin/log-quiet/sysd-mail-once -288 rss2email r2e -d /p/c/rss2email.json -c /p/c/rss2email.cfg run
EOF
s dd of=/etc/systemd/system/rss2email.timer <<'EOF'
[Unit]
Description=rss2email

[Timer]
# for initial run. required.
OnActiveSec=30
# for subsequent runs.
OnUnitInactiveSec=300

[Install]
WantedBy=timers.target
EOF
s systemctl daemon-reload


######### begin  pump.io periodic backup #############
if [[ $HOSTNAME == frodo ]]; then
  s dd of=/etc/systemd/system/pumpbackup.service <<'EOF'
[Unit]
Description=pump li backup
After=multi-user.target

[Service]
User=iank
Type=oneshot
ExecStart=/a/bin/log-quiet/sysd-mail-once pump-backup /a/bin/distro-setup/pump-backup
EOF
  s dd of=/etc/systemd/system/pumpbackup.timer <<'EOF'
[Unit]
Description=pump li backup hourly

[Timer]
OnCalendar=hourly

[Install]
WantedBy=timers.target
EOF
  s systemctl daemon-reload
  sgo pumpbackup.timer
fi
#########  end  pump.io periodic backup #############


######### begin irc periodic backup #############
if [[ $HOSTNAME == frodo ]]; then
  s dd of=/etc/systemd/system/ircbackup.service <<'EOF'
[Unit]
Description=irc li backup
After=multi-user.target

[Service]
User=iank
Type=oneshot
ExecStart=/a/bin/log-quiet/sysd-mail-once irc-backup rsync -rlptDhSAX root@iankelling.org:/var/lib/znc/moddata/log/iank/freenode/ /k/irclogs
EOF
  s dd of=/etc/systemd/system/ircbackup.timer <<'EOF'
[Unit]
Description=irc li backup hourly

[Timer]
OnCalendar=hourly

[Install]
WantedBy=timers.target
EOF
  s systemctl daemon-reload
  sgo ircbackup.timer
fi


######### end irc periodic backup #############


# https://github.com/jlebon/textern
cd /a/opt/textern
make native-install USER=1

case $distro in
  debian|trisquel|ubuntu)
    # suggests resolvconf package. installing it here is redundant, but make sure anyways.
    # todo: check other distros to make sure it\'s installed
    pi-nostart openvpn resolvconf
    # pi-nostart does not disable
    ser disable openvpn
    ;;
  *) pi openvpn;;
esac

/a/bin/distro-setup/radicale-setup

## android studio setup
# this contains the setting for android sdk to point to
# /a/opt/androidsdk, which is asked upon first run
lnf /a/opt/.AndroidStudio2.2 ~
# android site says it needs a bunch of packages for ubuntu,
# but I googled for debian, and someone says you just need lib32stdc++6 plus the
# jdk
# https://pid7007blog.blogspot.com/2015/07/installing-android-studio-in-debian-8.html
# see w.org for more android studio details
spa lib32stdc++6 default-jdk


############# begin syncthing setup ###########
if [[ $HOSTNAME == frodo ]]; then
  # It\'s simpler to just worry about running it in one place for now.
  # I assume it would work to clone it\'s config to another non-phone
  # and just run it in one place instead of the normal having a
  # separate config.  I lean toward using the same config, since btrfs
  # syncs between comps.
  case $distro in
    arch) pi syncthing ;;
    trisquel|ubuntu|debian)
      # testing has relatively up to date packages
      if ! isdebian-testing; then
        # based on error when doing apt-get update:
        # E: The method driver /usr/lib/apt/methods/https could not be found.
        pi apt-transport-https
        # google led me here:
        # https://apt.syncthing.net/
        curl -s https://syncthing.net/release-key.txt | sudo apt-key add -
        s="deb http://apt.syncthing.net/ syncthing release"
        if [[ $(cat /etc/apt/sources.list.d/syncthing.list) != "$s" ]]; then
          echo "$s" | s dd of=/etc/apt/sources.list.d/syncthing.list
          p update
        fi
      fi
      pi syncthing
      ;;
  esac
  lnf -T /w/syncthing /home/iank/.config/syncthing
  ser daemon-reload # syncthing likely not properly packaged
  sgo syncthing@iank # runs as iank

  # these things persist in ~/.config/syncthing, which I save in
  # /w/syncthing (not in /p, because syncthing should continue to
  # run on home server even when using laptop as primary device)
  # open http://localhost:8384/
  # change listen address from default to tcp://:22001,
  # this is because we do port forward so it doesn\'t have to use
  # some external server, but the syncthing is broken for port forward,
  # you get a message, something "like connected to myself, this should not happen"
  # when connecting to other local devices, so I bump the port up by 1,
  # based on
  # https://forum.syncthing.net/t/connected-to-myself-should-not-happen/1763/19.
  # Without this, it was being stuck syncing at 0%.
  # Set gui username and password.
  #
  # install syncthing via f-droid,
  # folder setting, turn off send only.
  # on phone, add device, click bar code icon
  # on dekstop, top right, actions, device id
  # after adding, notification will appear on desktop to confirm
  #
  # syncing folder. from phone to desktop: select desktop in the
  # folder on phone\'s sync options, notification will appear in
  # desktop\'s web ui within a minute. For the reverse, the
  # notification will appear in android\'s notifications, you have to
  # swipe down and tap it to add the folder. It won\'t appear in the
  # syncthing ui, which would be intuitive, but don\'t wait for it
  # there. The notification may not work, instead open the web gui
  # from in the app, there should be a notification within there.
  #
  # On phone, set settings to run syncthing all the time, and
  # show no notification.
  #
  # Folder versioning would make sense if I didn\'t already use btrfs
  # for backups. I would choose staggered, or trash can for more space.
  #
  # if needed to install on a remote comp:
  # ssh -L 8384:localhost:8384 -N frodo
  # open http://localhost:8384/
  #
  # Note, the other thing i did was port forward port 22000,
  # per https://docs.syncthing.net/users/firewall.html

fi
#############  end syncthing setup ###########



####### begin misc packages ###########

case $codename in
  flidas)

  ;;
esac


# sakura config is owned by ian
reset-sakura
reset-konsole
sudo -u user2 -i reset-konsole
# user2 xscreensaver we don't want to reset
reset-xscreensaver


# this would install from cabal for newer / consistent version across os, but it screws up xmonad, so disabled for now.
# this is also in primary-setup
# pi libxss-dev # dependency based on build failure
# cabal update
# cabal install --upgrade-dependencies  --force-reinstalls arbtt
# also, i assume syncing this between machines somehow messed thin
#lnf -T /m/arbtt-capture.log ~/.arbtt/capture.log

primary-setup

if [[ ! -e ~/.linphonerc && -e /p/.linphonerc-initial ]]; then
  cp /p/.linphonerc-initial ~/.linphonerc
fi


### begin spd install
pi libswitch-perl libdigest-md5-file-perl libgnupg-interface-perl
t=$(mktemp)
wget -O $t http://mirror.fsf.org/fsfsys-trisquel/fsfsys-trisquel/pool/main/s/spd-perl/spd-perl_0.2-1_amd64.deb
s dpkg -i $t
rm $t
# this guesses at the appropriate directory, adjust if needed
perldir=(/usr/lib/x86_64-linux-gnu/perl/5.*)
sudo ln -sf ../../../perl/5.18.2/SPD/ ${perldir[0]}
# newer distro had gpg2 as default, older one, flidas, need to make it that way
gpgpath=$(which gpg2)
if [[ $x ]]; then
  s mkdir -p /usr/local/spdhackfix
  s lnf -T $gpgpath /usr/local/spdhackfix/gpg
fi
### end spd install


if [[ $HOSTNAME == kw ]]; then
  cat <<'EOF'
NOTE: after this finishes, i did
s nmtui-connect
# remove br from auto:
s vim /etc/network/interfaces
EOF
fi

# nagstamon setting which were set through the ui
# in filters tab:
# all unknown sources
# all warning services
# acknowledged hosts & services
# hosts & services down for maintenence
# services on down hosts
# services on hosts in maintenece
# services on unreachable osts
# hosts in soft state
# services in soft state
# in display tab: fullscreen

# these translate to these settings I think
# filter_acknowledged_hosts_services = True
# filter_all_unknown_services = True
# filter_all_warning_services = True
# filter_hosts_in_soft_state = True
# filter_hosts_services_maintenance = True
# filter_services_in_soft_state = True
# filter_services_on_down_hosts = True
# filter_services_on_hosts_in_maintenance = True
# filter_services_on_unreachable_hosts = True
# notify_if_up = False
# statusbar_floating = False
# fullscreen = True
# but i'm just going to rely on the webpage plus sms for now.


case $distro in
  debian|trisquel|ubuntu)
    # it asks if it should make users in it's group capture packets without root,
    # which is arguably more secure than running wireshark as root. default is no,
    # which is what i prefer, since I plan to use tcpdump to input to wireshark.
    s DEBIAN_FRONTEND=noninteractive pi wireshark-gtk
    ;;
  # others unknown
esac

# /run and /dev/shm are listed as required for pulseaudio. All 4 in the group
# listed in the default config as suggested.
# /run/usr/1000 i noticed was missing for pulseaudio
# /run/user/0 just seemed like a not bad idea, given the above
tu /etc/schroot/desktop/fstab <<'EOF'
/run           /run            none    rw,bind         0       0
/run/lock      /run/lock       none    rw,bind         0       0
/dev/shm       /dev/shm        none    rw,bind         0       0
/run/shm       /run/shm        none    rw,bind         0       0
/run/user/1000 /run/user/1000  none    rw,bind         0       0
/run/user/1001 /run/user/1001  none    rw,bind         0       0
/run/user/0    /run/user/0     none    rw,bind         0       0
EOF

mkschroot() {
  distro=$1
  shift
  case $distro in
    ubuntu)
      repo=http://archive.ubuntu.com/ubuntu/
      ;;
    debian)
      repo=http://deb.debian.org/debian/
      ;;
  esac
  n=$1
  shift
  if schroot -l | grep -xFq chroot:$n; then
    echo "$0: $n schroot already installed, skipping"
    return 0
  fi
  apps=($@)
  d=/nocow/schroot/$n
  s dd of=/etc/schroot/chroot.d/$n.conf <<EOF
[$n]
description=$n
type=directory
directory=$d
profile=desktop
preserve-environment=true
users=$USER,user2
EOF
  if [[ -e $d/bin ]]; then
    s chroot $d apt-get update
    s chroot $d apt-get -y dist-upgrade --purge --auto-remove
    cd; s schroot -c $n -- apt-get install --allow-unauthenticated -y ${apps[@]}
  else
    s mkdir -p $d

    s debootstrap $n $d $repo
    cd; s schroot -c $n -- apt-get install --allow-unauthenticated -y ${apps[@]}
  fi
  s cp -P {,$d}/etc/localtime
}
s dd of=/etc/systemd/system/schrootupdate.service <<'EOF'
[Unit]
Description=schrootupdate
After=multi-user.target

[Service]
Type=oneshot
ExecStart=/a/bin/log-quiet/sysd-mail-once schrootupdate /a/bin/distro-setup/schrootupdate
EOF
s dd of=/etc/systemd/system/schrootupdate.timer <<'EOF'
[Unit]
Description=schrootupdate

[Timer]
OnCalendar=*-*-* 04:20:00

[Install]
WantedBy=timers.target
EOF
s systemctl daemon-reload
sgo schrootupdate.timer



# for my roommate
case $distro in
  trisquel)
    mkschroot debian stretch firefox-esr pulseaudio chromium
    ;;
  debian)
    pi chromium
    ;;
esac

s mkdir -p /nocow/user
s chown $USER:$USER /nocow/user
pi anki


# adapted from /var/lib/dpkg/info/transmission-daemon.postinst
# 450 seems likely to be unused. we need to specify one or else
# it won't be stable across installs.
if ! getent passwd debian-transmission > /dev/null; then
  s groupadd -g 450 debian-transmission
  case $distro in
    arch)
      s useradd \
        --system \
        --create-home \
        --gid 450 \
        --uid 450 \
        --home-dir /var/lib/transmission-daemon \
        --shell /bin/false \
        debian-transmission
      ;;
    *)
      s adduser --quiet \
        --gid 450 \
        --uid 450 \
        --system \
        --no-create-home \
        --disabled-password \
        --home /var/lib/transmission-daemon \
        debian-transmission
      ;;
  esac
fi
# We want group writable stuff from transmission.
# However, after setting this, I learn that transmission sets it's
# own umask based on it's settings file. Well, no harm leaving this
# so it's set right from the beginning.
s chfn debian-transmission -o umask=0002

case $distro in
  debian|trisquel|ubuntu)
    # note i had to do this, which is persistent:
    # cd /i/k
    # s chgrp debian-transmission torrents partial-torrents

    # syslog says things like
    # 'Failed to set receive buffer: requested 4194304, got 425984'
    # google suggets giving it even more than that
    tu /etc/sysctl.conf<<'EOF'
net.core.rmem_max = 67108864
net.core.wmem_max = 16777216
EOF
    s sysctl -p

    # some reason it doesn\'t seem to start automatically anyways
    pi-nostart transmission-daemon
    # be extra sure its not started
    ser disable transmission-daemon
    ser stop transmission-daemon

    # the folder was moved here after an install around 02/2017.
    # it contains runtime data,
    # plus a simple symlink to the config file which it\'s
    # not worth separating out.
    # between comps, the uid can change
    f=/i/transmission-daemon
    s lnf -T $f /var/lib/transmission-daemon/.config/transmission-daemon
    if [[ -e $f ]]; then
      s chown -R debian-transmission:debian-transmission $f
    fi
    for f in /i/k/partial-torrents /i/k/torrents; do
      if [[ -e $f ]]; then
        s chown -R debian-transmission:user2 $f
      fi
    done
    s chown -R debian-transmission:debian-transmission /var/lib/transmission-daemon
    #
    # config file documented here, and it\'s the same config
    # for daemon vs client, so it\'s documented in the gui.
    # https://trac.transmissionbt.com/wiki/EditConfigFiles#Options
    #
    # I originaly setup rpc-whitelist, but after using
    # routing to a network namespace, it doesn\'t see the
    # real source address, so it\'s disabled.
    #
    # Changed the cache-size to 256 mb, reduces disk use.
    # It is a read & write cache.
    #
    s ruby <<'EOF'
require 'json'
p = '/etc/transmission-daemon/settings.json'
File.write(p, JSON.pretty_generate(JSON.parse(File.read(p)).merge({
'rpc-whitelist-enabled' => false,
'rpc-authentication-required' => false,
'incomplete-dir' => '/i/k/partial-torrents',
'incomplete-dir-enabled' => true,
'download-dir' => '/i/k/torrents',
"speed-limit-up" => 800,
"speed-limit-up-enabled" => true,
"peer-port" => 61486,
"cache-size-mb" => 256,
"ratio-limit" => 5.0,
"ratio-limit-enabled" => true,
})) + "\n")
EOF

    ;;
  # todo: others unknown
esac



# trisquel 8 = openvpn, debian stretch = openvpn-client
vpn_ser=openvpn-client
if [[ ! -e /lib/systemd/system/openvpn-client@.service ]]; then
  vpn_ser=openvpn
fi

s dd of=/etc/systemd/system/transmission-daemon-nn.service <<EOF
[Unit]
Description=Transmission BitTorrent Daemon netns
After=network.target
Requires=${vpn_ser}-nn@client.service
After=${vpn_ser}-nn@client.service
JoinsNamespaceOf=${vpn_ser}-nn@client.service

[Service]
#User=debian-transmission
# notify type doesn't work with sudo
#Type=notify
ExecStart=/usr/bin/nsenter --mount=/root/mount_namespaces/client sudo -u debian-transmission /usr/bin/transmission-daemon -f --log-error
ExecReload=/bin/kill -s HUP \$MAINPID
PrivateNetwork=true
Nice=19

[Install]
WantedBy=multi-user.target
EOF
ser daemon-reload

if [[ $HOSTNAME == frodo ]]; then
  sgo transmission-daemon-nn
fi


######### begin transmission client setup ######

if [[ -e /p/transmission-rpc-pass ]]; then
  # arch had a default config,
  # debian had nothing until you start it.
  # With a little trial an error, here is a minimal config
  # taken from the generated one, plus changes that the
  # settings ui does, without a bunch of ui crap settings.
  #
  # only settings I set were
  # hostname
  # auto-connect
  # password

  # the password is randomly generated on first run, i copied it out
  # so it could be used by other hosts.
  s ruby <<'EOF'
require 'json'
p = '/etc/transmission-daemon/settings.json'
s = JSON.parse(File.read(p))
s["rpc-password"] = File.read("/p/transmission-rpc-pass").chomp
# default is 0022 (18 in decimal)
s["umask"] = 2
File.write p, JSON.pretty_generate(s)
EOF

  rpc_pass=$(</p/transmission-rpc-pass)
  for f in /home/*; do
    u=${f##*/}
    if [[ ! $(id -u $u) -ge 1000 ]]; then
      continue
    fi
    d=$f/.config/transmission-remote-gtk
    s -u $u mkdir -p $d
    s -u $u dd of=$d/config.json <<EOF
{
  "profiles" : [
    {
      "profile-name" : "Default",
      "hostname" : "transmission.b8.nz",
      "rpc-url-path" : "/transmission/rpc",
      "username" : "",
      "password" : "$rpc_pass",
      "auto-connect" : true,
      "ssl" : false,
      "timeout" : 40,
      "retries" : 3,
      "update-active-only" : false,
      "activeonly-fullsync-enabled" : false,
      "activeonly-fullsync-every" : 2,
      "update-interval" : 3,
      "min-update-interval" : 3,
      "session-update-interval" : 60,
      "exec-commands" : [
      ],
      "destinations" : [
      ]
    }
  ],
  "profile-id" : 0,
  "add-options-dialog" : false
}
EOF
  done
fi
######### end transmission client setup ######

# dunno why it\'s there, but get rid of it
case $HOSTNAME in
  li|lj) s rm -rf /home/linode ;;
esac


### printer setup
case $distro in
  arch)
    pi cups ghostscript gsfonts # from arch wiki cups page
    pi hplip # from google
    s gpasswd -a $USER sys # from arch wiki
    sgo org.cups.cupsd.service
    ;;
  debian|trisquel|ubuntu)
    pi cups
    s gpasswd -a $USER lpadmin # based on ubuntu wiki
    spa hplip
    ;;
  # other distros unknown
esac
# goto http://127.0.0.1:631
# administration tab, add new printer button.
# In debian, I could use hte recommended driver,
# in arch, I had to pick out the 6L driver.


# allow user to run vms, from debian handbook
for x in iank user2; do s usermod -a -G libvirt,kvm $x; done
# bridge networking as user fails. google lead here, but it doesn\'t work:
# oh well, I give up.
# http://wiki.qemu.org/Features-Done/HelperNetworking
# s mkdir /etc/qemu
# f=/etc/qemu/bridge.conf
# s dd of=$f <<'EOF'
# allow br0
# EOF
# #s chown root:qemu $f # debian has somethig like qemu-libvirt. equivalent?
# s chmod 640 $f

# general known for debian/ubuntu, not for fedora

case $distro in
  debian|trisquel|ubuntu)
    if ! type -p go &>/dev/null; then
      cd $(mktemp -d)
      # just the latest stable at the time of writing
      # TODO, maybe put this all into a build script,
      # and do some automatic updates
      wget -q https://dl.google.com/go/go1.12.4.linux-amd64.tar.gz
      s tar -C /usr/local -xzf go1.12.4.linux-amd64.tar.gz
      rm -f ./*
    fi
    go get -u mvdan.cc/fdroidcl
    # a bit of googling, and added settings to bashrc
    ;;
esac

case $distro in
  arch)
    pi virt-install
    # otherwise we get error about accessing kvm module.
    # seems like there might be a better way, but google was a bit vague.
    s $sed -ri '/^ *user *=/d' /etc/libvirt/qemu.conf
    echo 'user = "root"' | s tee -a /etc/libvirt/qemu.conf
    # guessing this is not needed
    #sgo virtlogd.service

    # iank: disabed as im not using libvirt usually
    # # https://bbs.archlinux.org/viewtopic.php?id=206206
    # # # this should prolly go in the wiki
    # sgo virtlogd.socket
    # sgo libvirtd
    ;;
  debian|trisquel|ubuntu)
    pi-nostart virtinst virt-manager
    ;;

esac


case $distro in
  fedora)
    cd $(mktemp -d)
    wget ftp://ftp.gnu.org/pub/gnu/global/global-6.5.7.tar.gz
    ex global*
    cd global-6.5.7
    # based on https://github.com/leoliu/ggtags
    ./configure --with-exuberant-ctags=/usr/bin/ctags
    make
    s make install
    pip install pygments
    ;;
  *)
    pi global
    ;;&
  arch)
    pi  python2-pygments
    ;;
  debian|trisquel|ubuntu)
    pi python-pygments
    ;;
esac



# removed synergy since ive not used it in a long time


pi --no-install-recommends kdeconnect
### kdeconnect for gnome. started in /a/bin/distro-setup/desktop-20-autostart.sh
### but gnome + xmonad not working in flidas, so i disabled it
# pi libgtk-3-dev python3-requests-oauthlib valac cmake python-nautilus libappindicator3-dev
# cd /a/opt/indicator-kdeconnect
# mkdir -p build
# cd build
# cmake .. -DCMAKE_INSTALL_PREFIX=/usr
# make
# sudo make install
# # we can start it manually with /usr/lib/x86_64-linux-gnu/libexec/kdeconnectd
# # it seems, according to
# # /etc/xdg/autostart/kdeconnectd.desktop
# # I'm not seeing the icon, but the clipboard replication is working


### model 01 arduino support ###
# https://github.com/keyboardio/Kaleidoscope/wiki/Install-Arduino-support-on-Linux
# also built latest arduino in /a/opt/Arduino, (just cd build; ant build; ant run )
# set arduino var in bashrc,
# have system config file setup too.
sudo adduser $USER dialout
case $distro in
  arch)
    sudo usermod -a -G uucp $USER
    ;;
esac

# this is for the mail command too. update-alternatives is kind of misleading
# since at least it's main commands pretend mail does not exist.
# bsd's mail got pulled in on some dumb dependency, i dunno how.
s update-alternatives --set mailx /usr/bin/mail.mailutils

######### end misc packages #########


# packages I once used before and liked, but don\'t want installed now for
# various reasons:
# python-sqlite is used for offlineimap
# lxappearance python-sqlite dolphin paman dconf-editor



######## unfinished

# todo, finish configuring smart.

pi smartmontools
# mostly from https://wiki.archlinux.org/index.php/S.M.A.R.T.
# turn on smart. background on options:
# first line, -a = test everyting on all devices.
# -S on, turn on disk internal saving of vendor specific info,
# from google, seems like this is usually already on and fairly standard.
# -o on, turn on 4 hour period non-performance degrading testing.
# short test daily 2-3am, extended tests Saturdays between 3-4am:
sched="-s (S/../.././02|L/../../6/03)"
s sed -i --follow-symlinks "s#^[[:space:]]*DEVICESCAN.*#\
DEVICESCAN -a -o on -S on -n standby,q $sched \
-m ian@iankelling.org -M exec /usr/local/bin/smart-notify#" /etc/smartd.conf

# in the default configuration of at least ubuntu 14.04, resolvconf is
# configured to order any nameservers associated with tun* or tap*
# before the normal internet interfaces, which means they are always
# consulted first. This is often slower and undesirable, ie. local dns
# queries go from 0ms to 10+ or 100+ ms. To reverse the ordering, you
# can do:
#sudo sed -i --follow-symlinks '/tun\*\|tap\*/d' /etc/resolvconf/interface-order
# however, this breaks dns lookup for hosts on the openvpn lan.
# I can\'t figure out why hosts on the normal lan would not be
# broken under the default ordering, except the host I was
# testing with previously had an entry in /etc/hosts.

############# end unfinished

########### misc stuff

# make networkmanager use resolvconf instead of its own dnsmasq which
# conflicts with the normal dnsmasq package.
f=/etc/NetworkManager/NetworkManager.conf
m=$(md5sum $f)
s sed -ri '/ *\[main\]/,/^ *\[[^]]+\]/{/^\s*dns[[:space:]=]/d}' $f
if [[ $m != $(md5sum $f) ]]; then
  srestart NetworkManager
fi

# make my /etc/fonts/conf.d/ get used.
# I have a new sans-serif font there because the default one
# displays l and I as the same char, grrrrr.
s fc-cache

/a/bin/distro-setup/mymimes


sgo dynamicipupdate


# stop autopoping windows when i plug in an android phone.
# dbus-launch makes this work within an ssh connection, otherwise you get this message,
# with still 0 exit code.
# dconf-WARNING **: failed to commit changes to dconf: Cannot autolaunch D-Bus without X11 $DISPLAY
dbus-launch gsettings set org.gnome.desktop.media-handling automount-open false


# on grub upgrade, we get prompts unless we do this
devs=()
for dev in $(s btrfs fil show /boot | sed -nr 's#.*path\s+(\S+)$#\1#p'); do
  devs+=("$(devbyid $dev),")
done
devs[-1]=${devs[-1]%,} # jonied by commas
s debconf-set-selections <<EOF
grub-pc grub-pc/install_devices multiselect ${devs[*]}
EOF

# btrfs maintenance
sgo btrfsmaint.timer
sgo btrfsmaintstop.timer


# the wiki backup script from ofswiki.org uses generic paths
s lnf /p/c/machine_specific/li/mw_vars /root
s lnf /k/backup/wiki_backup /root


case $distro in
  trisquel|ubuntu|debian)
    # unison-gtk second, i want it to be default, not sure if that works
    # with spa. note, I used to install from testing repo when using stable,
    # but it shouldn't be needed since I wrote a script to handle mismatching
    # compilers.
    spa unison unison-gtk
    ;;
  arch)
    spa unison gtk2
    ;;
esac

case $distro in
  arch)
    # default is alsa, doesn\'t work with with pianobar
    s dd of=/etc/libao.conf <<'EOF'
default_driver=pulse
EOF
    ;;
esac

# # disabled due to my patch being in btrbk
# case $distro in
#     arch|debian|trisquel|ubuntu) pi btrbk ;;
#     # others unknown
# esac
cd /a/opt/btrbk
s make install

sgo btrbk.timer
# note: to see when it was last run,
# ser list-timers


end_msg <<'EOF'
In mate settings settings, change scrolling to two-finger,
because the default edge scroll doesn\'t work. Originally found this in debian.
EOF

case $distro in
  debian)
    # remove dep that came in with desktop
    pu transmission-gtk
    ;;
esac


case $distro in
  debian|trisquel|ubuntu) s gpasswd -a iank adm ;; #needed for reading logs
esac

/a/bin/buildscripts/pithosfly


# based on guix manual instructions, also added code to profile
pi nscd
if ! type -p guix >/dev/null; then
  cd $(mktemp -d)
  wget https://git.savannah.gnu.org/cgit/guix.git/plain/etc/guix-install.sh
  # added some stuff to envonment.sh for profile based on
  # manual instructions
  # wget https://sv.gnu.org/people/viewgpg.php?user_id=15145 -qO - | gpg --import -
  # echo is to get past prompt
  yes | sudo -E HOME=$HOME bash guix-install.sh || [[ $? == 141 ]]
  guix install glibc-utf8-locales
  guix package --install guile
fi

# install rust.
curl https://sh.rustup.rs -sSf | bash -s -- -y
# todo: update this. updates in rust are stupidly complicate
if ! which rg &>/dev/null; then
  cargo install ripgrep
fi

#### tor
case $distro in
  # based on
  # https://www.torproject.org/docs/rpms.html.en
  # https://www.torproject.org/docs/debian.html.en
  # todo: figure out if the running service needs to be restarted upon updates
  # todo on fedora: setup non-dev packages
  fedora)
    s dd of=/etc/yum.repos.d/torproject.repo <<'EOF'
[tor]
name=Tor experimental repo
enabled=1
baseurl=http://deb.torproject.org/torproject.org/rpm/tor-testing/fc/20/$basearch/
gpgcheck=1
gpgkey=http://deb.torproject.org/torproject.org/rpm/RPM-GPG-KEY-torproject.org.asc

[tor-source]
name=Tor experimental source repo
enabled=1
autorefresh=0
baseurl=http://deb.torproject.org/torproject.org/rpm/tor-testing/fc/20/SRPMS
gpgcheck=1
gpgkey=http://deb.torproject.org/torproject.org/rpm/RPM-GPG-KEY-torproject.org.asc
EOF

    # to be secure, take a look at the fingerprint reported from the following install, and see if it matches from the link above:
    # 3B9E EEB9 7B1E 827B CF0A  0D96 8AF5 653C 5AC0 01F1
    sgo tor
    /a/bin/buildscripts/tor-browser
    ;;
  ubuntu)
    tu /etc/apt/sources.list "deb http://deb.torproject.org/torproject.org $(debian-codename) main"
    gpg --keyserver keys.gnupg.net --recv 886DDD89
    gpg --export A3C4F0F979CAA22CDBA8F512EE8CBC9E886DDD89 | sudo apt-key add -
    p update
    pi deb.torproject.org-keyring
    pi tor
    /a/bin/buildscripts/tor-browser
    ;;
  debian)
    pi tor
    /a/bin/buildscripts/tor-browser
    ;;
  arch)
    pi tor tor-browser-en
    sgo tor
    ;;
  # ubuntu unknown
esac

# nfs server
case $distro in
  fedora)
    end_msg <<'EOF'
fedora todo: disable the firewall or find a way to automate it.
there's an unused section in t.org for tramikssion firewall setup

fedora manual config for nfs:
s firewall-config
change to permanent configuration
check the box for nfs
was hard to figure this out, not sure if this is all needed, but
unblock these too
mountd: udp/tcp 20048
portmapper, in firewall-config its called rpc-bind: udp/tcp 111
troubleshooting, unblock things in rpcinfo -p
make sure to reload the firewall to load the persistent configuration


EOF
    pi nfs-utils
    ;;
  debian|trisquel|ubuntu)
    pi-nostart nfs-server
    ;;
  arch)
    pi nfs-utils || pending_reboot=true
    ;;
esac

# networkmanager has this nasty behavior on flidas: if the machine
# crashes with dnsmasq running, on subsequent boot, it adds an entry to
# resolvconf for 127.0.0.1 in some stupid attempt to restore
# nameservers.
# This can be manually fixed by stoping dnsmasq,
# then based on whats in /run/dnsmasq/, i see we can run
# s resolvconf -d NetworkManager
# oh ya, and stoping NetworkManager leaves this crap behind without cleaning it up.
ser stop NetworkManager
ser disable NetworkManager


if [[ $HOSTNAME == frodo ]]; then
  # nohide = export filesystems mounted deeper than the export point
  # fsid=0 makes this export the "root" export
  # not documented in the man page, but this means
  # 1. it can be mounted with a shorthand of server:/
  # 2. exports that are subdirectories of this one will automatically be mounted
  tu /etc/exports <<'EOF'
/k 10.0.0.0/24(rw,fsid=0,nohide,no_root_squash,async,no_subtree_check,insecure)
EOF
  s exportfs -rav
fi


e "$end_msg_var"



# if I was going to create a persistent vm, i might do it like this:
# variant=something  # from: virt-install --os-variant list
# s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
  #   --disk=/a/images/some_name.qcow2,bus=virtio --vcpus 2 -r 4096 -w bridge=br0 \
  #   -n some_name --import --os-variant $variant --cpu host-model-only



######### begin stuff belonging at the end    ##########


if $pending_reboot; then
  echo "$0: pending reboot and then finished. doing it now."
  s reboot now
else
  echo "$0: $(date): ending now)"
fi
exit 0