From: Ian Kelling Date: Wed, 16 Feb 2022 02:28:12 +0000 (-0500) Subject: add arg to just gen files, refactor, cleanup X-Git-Url: https://iankelling.org/git/?p=automated-distro-installer;a=commitdiff_plain;h=ba262e831eff83f90b963d7a7c9b678ce7436294 add arg to just gen files, refactor, cleanup --- diff --git a/README b/README index aeb3957..3f01a97 100644 --- a/README +++ b/README @@ -286,6 +286,13 @@ umount dev umount sys reboot +# for switching the boot to root2 +zboot +# for switching back, efibootmgr, if there is a problem with the root filesystem detection, +# boot into the debian bootstrap distro, run partition.DEFAULT using comments for mktab arg. +# then manually run iboot and then reboot. + + # pine rock64 notes # the only useful image is ubuntu 18.04 ayafun or something. # using emmc usb: @@ -300,6 +307,9 @@ s apt-get update s apt dist-upgrade + + + # TODO Change arch to archlike and to support arch and parabola diff --git a/fai/config/hooks/partition.DEFAULT b/fai/config/hooks/partition.DEFAULT index f3df865..fc6da11 100755 --- a/fai/config/hooks/partition.DEFAULT +++ b/fai/config/hooks/partition.DEFAULT @@ -24,7 +24,7 @@ if [[ $EUID != 0 ]]; then exit 1 fi -# for calling outside of FAI: +# for calling outside of FAI without args: # fai-redep # # source /b/fai/fai-wrapper @@ -33,13 +33,29 @@ fi # - Set a VOL_DISTROVER (if not doing mkroot2) eg: # fai-setclass VOL_NABIA # -# OPTIONS: +# ARGS (only 1 is valid): # # mkroot2: for running outside of fai and setting up the root2/boot2 luks and btrfs and tab files # # mkroot2tab: for running outside of fai and setting up the root2/boot2 tab files, in case luks and btrfs # happen to already be setup. # +# mktab: for running outside of fai and generating a crypttab for +# the main root fs in /tmp/fai. Must run with env var, eg export DISTRO=trisquelnabia. +# +# Example use in a bootstrap distro: +# scp /a/bin/fai/fai/config/{distro-install-common/devbyid,hooks/partition.DEFAULT} root@HOST: +# sl HOST +# export DISTRO=trisquelnabia; ./partition.DEFAULT mktab +# ## cryptsetup wont take within a pipeline +# mapfile -t lines < <(awk '! /swap/ {print $2,$1}' /tmp/fai/crypttab ) +# for l in "${lines[@]}"; do cryptsetup luksOpen $l; done +# +# # or alternatively, to avoid typing it many times: +# read -r lukspw; for l in "${lines[@]}"; do yes "$lukspw" | cryptsetup luksOpen $l; done + +## potentially useful later: +# sed 's#/root/keyscript,#decrypt_keyctl,#;s/$/,noauto/' /tmp/fai/crypttab >/etc/crypttab # # environment variables: # @@ -70,7 +86,16 @@ fi mkroot2tab=false mkroot2=false +mktab=false if [[ $1 ]]; then + ## duplicates fai-wrapper, for convenience of not needing it + if ! type -t ifclass &>/dev/null; then + ifclass() { + local var=${1/#/CLASS_} + [[ $HOSTNAME == $1 || ${!var} ]] + } + fi + case $1 in mkroot2) mkroot2=true @@ -78,6 +103,9 @@ if [[ $1 ]]; then mkroot2tab) mkroot2tab=true ;; + mktab) + mktab=true + ;; *) echo "$0: error: unsupported arg: $1" >&2 exit 1 @@ -147,6 +175,7 @@ lastn=$bios_grubn ##### end configuration +##### begin function defs add-part() { # add partition suffix to $dev local d part @@ -162,22 +191,31 @@ add-part() { # add partition suffix to $dev rootdev() { add-part $@ $rootn; } root2dev() { add-part $@ $root2n; } -swapdev() { add-part $@ $swapn; } -bootdev() { add-part $@ $bootn; } -boot2dev() { add-part $@ $boot2n; } -efidev() { add-part $@ $efin; } -grub_extdev() { add-part $@ $grub_extn; } -bios_grubdev() { add-part $@ $bios_grubn; } -even_bigdev() { add-part $@ $even_bign; } + +# note, the following block could all have $@ like below +# But it is not added since it is not used and shellcheck +# rightly says args never used should not exist. +##swapdev() { add-part $swapn; } + +swapdev() { add-part $swapn; } +bootdev() { add-part $bootn; } +boot2dev() { add-part $boot2n; } +efidev() { add-part $efin; } +grub_extdev() { add-part $grub_extn; } +bios_grubdev() { add-part $bios_grubn; } +even_bigdev() { add-part $even_bign; } crypt-dev() { echo /dev/mapper/crypt_dev_${1##*/}; } crypt-name() { echo crypt_dev_${1##*/}; } root-cryptdev() { crypt-dev $(rootdev $@); } root2-cryptdev() { crypt-dev $(root2dev $@); } -swap-cryptdev() { crypt-dev $(swapdev $@); } -root-cryptname() { crypt-name $(rootdev $@); } -root2-cryptname() { crypt-name $(root2dev $@); } -swap-cryptname() { crypt-name $(swapdev $@); } + +# I omit a possible parameter since it is unused: +##swap-cryptdev() { crypt-dev $(swapdev $@); } +swap-cryptdev() { crypt-dev $(swapdev); } +root-cryptname() { crypt-name $(rootdev); } +root2-cryptname() { crypt-name $(root2dev); } +swap-cryptname() { crypt-name $(swapdev); } dev-mib() { local d=${1:-$dev} @@ -212,6 +250,8 @@ luks-setup() { ##### end function defs + +##### begin variable setup if ifclass REPARTITION; then partition=true # force a full wipe else @@ -228,11 +268,12 @@ if (($(nproc) > 2)); then fi declare -A disk_excludes -if ! $mkroot2 && ! $mkroot2tab ! ifclass USE_MOUNTED; then +if ! $mkroot2 && ! $mkroot2tab && ! $mktab ! ifclass USE_MOUNTED; then ## ignore disks that are mounted, eg when running from fai-cd while read -r l; do eval "$l" if [[ ! $PKNAME ]]; then + # shellcheck disable=SC2153 # not a misspelling PKNAME="$KNAME" fi if [[ $MOUNTPOINT ]]; then @@ -249,8 +290,8 @@ for disk in $(lsblk -do name,tran -n | awk '$2 ~ "^(sata|nvme)$" { print $1 }'); continue fi case $(cat /sys/block/$disk/queue/rotational) in - 0) ssds+=(/dev/$disk) ;; - 1) hdds+=(/dev/$disk) ;; + 0) ssds+=("/dev/$disk") ;; + 1) hdds+=("/dev/$disk") ;; *) echo "$0: error: unknown /sys/block/$disk/queue/rotational: \ $(cat $disk/queue/rotational)"; exit 1 ;; esac @@ -261,9 +302,9 @@ done # very odd, but convenient for ignoring them here. # TODO: find a reliable way to ignore them. if ! ifclass ROTATIONAL && (( ${#ssds[@]} > 0 )); then - short_devs=( ${ssds[@]} ) + read -ra short_devs<<<"${ssds[@]}" else - short_devs=( ${hdds[@]} ) + read -ra short_devs<<<"${hdds[@]}" fi # check if the partitions exist have the right filesystems @@ -271,6 +312,7 @@ fi for dev in ${short_devs[@]}; do if $partition; then break; fi y=$(readlink -f $dev) + # shellcheck disable=SC2206 # globbing is intended arr=($y?*) if (( ${#arr[@]} < lastn )); then partition=true @@ -292,7 +334,7 @@ fi devs=() shopt -s extglob for short_dev in ${short_devs[@]}; do - devs+=($(devbyid $short_dev)) + devs+=("$(devbyid $short_dev)") done if [[ ! ${devs[0]} ]]; then echo "$0: error: failed to detect devs" >&2 @@ -329,16 +371,16 @@ for dev in ${devs[@]}; do fi done if ! $bad_disk; then - boot_devs+=($(bootdev)) - boot2_devs+=($(boot2dev)) + boot_devs+=("$(bootdev)") + boot2_devs+=("$(boot2dev)") fi else boot_space=$(( boot_space + $(parted -m $dev unit MiB print | \ sed -nr "s#^/dev/[^:]+:([0-9]+).*#\1#p") - 1)) - boot_devs+=($(bootdev)) - boot2_devs+=($(boot2dev)) + boot_devs+=("$(bootdev)") + boot2_devs+=("$(boot2dev)") fi - if $first && [[ $boot_devs ]]; then + if $first && (( ${boot_devs[@]} >= 1 )) ; then first_efi=$(efidev) first_grub_extdev=$(grub_extdev) first=false @@ -358,6 +400,8 @@ else raid_level=10 fi + + ### Begin calculate boot partition space # due to raid duplication case $raid_level in @@ -392,6 +436,13 @@ case $raid_level in esac ### end calculate boot partition space +bpart() { # btrfs a partition + case $raid_level in + 0) mkfs.btrfs -f $@ ;; + 1) mkfs.btrfs -f -m raid1 -d raid1 $@ ;; + 10) mkfs.btrfs -f -m raid10 -d raid10 $@ ;; + esac +} if [[ ! $DISTRO ]]; then @@ -427,48 +478,12 @@ if [[ ! $DISTRO ]]; then fi fi - -bpart() { # btrfs a partition - case $raid_level in - 0) mkfs.btrfs -f $@ ;; - 1) mkfs.btrfs -f -m raid1 -d raid1 $@ ;; - 10) mkfs.btrfs -f -m raid10 -d raid10 $@ ;; - esac -} - - -if [[ ! $luks_dir ]]; then - # see README for docs about how to create these - luks_dir=$FAI/distro-install-common/luks - if [[ ! -d $luks_dir ]]; then - luks_dir=/q/root/luks - fi - if [[ ! -d $luks_dir ]]; then - echo "$0: error: no luks_dir found" >&2 - exit 1 - fi -fi - -luks_file=$luks_dir/host-$HOSTNAME -if [[ ! -e $luks_file ]]; then - hostkeys=($luks_dir/host-*) - # if there is only one key, we might be deploying somewhere - # where dhcp doesnt give us a proper hostname, so use that. - if [[ ${#hostkeys[@]} == 1 && -e ${hostkeys[0]} ]]; then - luks_file=${hostkeys[0]} - else - echo "$0: error: no key for hostname at $luks_file" >&2 - exit 1 - fi -fi - -# # note, corresponding changes in /b/ds/keyscript-{on,off} -if ifclass demohost; then - lukspw=x -elif [[ -e $luks_dir/$HOSTNAME ]]; then - lukspw=$(cat $luks_dir/$HOSTNAME) +if [[ $DISTRO == debianbullseye_bootstrap ]]; then + # this is just convenience for the libreboot_grub config + # so we can glob the other ones easier. + boot_vol=$DISTRO else - lukspw=$(cat $luks_dir/iank) + boot_vol=boot_$DISTRO fi @@ -478,26 +493,141 @@ first_root_crypt=$(root-cryptdev ${devs[0]}) swap_mib=$(( $(grep ^MemTotal: /proc/meminfo | \ awk '{print $2}') * 3/(${#devs[@]} * 2 ) / 1024 )) -mkdir -p /tmp/fai root_devs=() for dev in ${devs[@]}; do - root_devs+=($(rootdev)) + root_devs+=("$(rootdev)") done shopt -s nullglob +##### end variable setup -# We write to these files instead of just /etc/fstab, /etc/crypttab, -# because these are filesystems created after our current root, and so -# this allows us to update other root filesystems too. -rm -f /mnt/root/root2-{fs,crypt}tab -if $mkroot2 || $mkroot2tab; then + + +mktab() { + mkdir -p /tmp/fai + dev=${boot_devs[0]} + fstabstd="x-systemd.device-timeout=30s,x-systemd.mount-timeout=30s" + + if [[ $DISTRO == debianbullseye_bootstrap ]]; then + cat > /tmp/fai/fstab </tmp/fai/disk_var.sh < /tmp/fai/fstab <>/tmp/fai/crypttab <> /tmp/fai/fstab </tmp/fai/disk_var.sh <>/tmp/fai/crypttab <> /tmp/fai/fstab <&2 + exit 1 + fi + fi + + luks_file=$luks_dir/host-$HOSTNAME + if [[ ! -e $luks_file ]]; then + # shellcheck disable=SC2206 # globbing is intended + hostkeys=($luks_dir/host-*) + # if there is only one key, we might be deploying somewhere + # where dhcp doesnt give us a proper hostname, so use that. + if [[ ${#hostkeys[@]} == 1 && -e ${hostkeys[0]} ]]; then + luks_file=${hostkeys[0]} + else + echo "$0: error: no key for hostname at $luks_file" >&2 + exit 1 + fi + fi + + # # note, corresponding changes in /b/ds/keyscript-{on,off} + if ifclass demohost; then + lukspw=x + elif [[ -e $luks_dir/$HOSTNAME ]]; then + lukspw=$(cat $luks_dir/$HOSTNAME) + else + lukspw=$(cat $luks_dir/iank) + fi + + if $mkroot2; then + luks_file=$luks_dir/host-amy + lukspw=$(cat $luks_dir/amy) + fi +} + + +#### root2 non-fai run +doroot2() { + + # We write to these files instead of just /etc/fstab, /etc/crypttab, + # because these are filesystems created after our current root, and so + # this allows us to update other root filesystems too. + rm -f /mnt/root/root2-{fs,crypt}tab if $partition; then echo $0: error: found partition=true but have mkroot2 arg exit 1 fi for dev in ${devs[@]}; do if $mkroot2; then - luks_file=$luks_dir/host-amy - lukspw=$(cat $luks_dir/amy) luks-setup $(root2dev) fi cat >>/mnt/root/root2-crypttab < /tmp/fai/fstab </tmp/fai/disk_var.sh < /tmp/fai/fstab <>/tmp/fai/crypttab <> /tmp/fai/fstab </tmp/fai/disk_var.sh <>/tmp/fai/crypttab <> /tmp/fai/fstab <